27ML100_TDS.pdf

Matline+ Technical Data
Matline+ is designed for use as a core material
in dry and wet-on-wet hand layup and spray
lamination production.
Matline+ is proven as an effective alternative
to glass fiber core layers, delivering consistent
thickness without adding excess weight,
improving rigidity whilst lowering overall
manufacturing costs.
Matline Technical DataMatline+101Matline+201Matline+301Matline+401Matline+501
Dry Weight
g/m2 55 70 110 140 185
oz/sqy 1.61 2.06 3.24 4.13 5.44
Dry Thickness
mm 1.4 2 3 4 5
mils 55 79 118 158 197
Resin Impregnated mm 1.3 1.9 2.9 3.9 4.9
Thickness mils 55 75 114 154 193
Roll length
m 100 80 50 40 30
ft 328.08 262.47 164.04 131.23 98.43
Roll Width
cm 100 100 100 100 100
inch 39.4 39.4 39.4 39.4 39.4
Impregnated
g/cm
3
0.81 0.67 0.66 0.65 0.65
Specific
Weight (Density) lb/in
3
0.029 0.024 0.024 0.024 0.023
Resin kg/m
2
1 1.2 1.8 2.4 3
Consumption lbs/sqy 1.83 2.2 3.3 4.5 5.5
The information contained in this Technical Data Sheet has been developed by the company, Composite Essential Materials, LLC on the
express request of its customer and to the best of its knowledge. Therefore, the company, Composite Essential Materials, LLCdoes not
assume any liability with respect to the correctness and/or completeness of the information provided by this Technical Data Sheet. The
customer in particular shall not be released from his duty to check all safety relevant properties of the delivered nonwovensand to refer to
the official texts for full information on the local obligations.
315 NW Peacock Blvd 772.344.0034
Port St. Lucie, FL 34986 contact@compositeessentials.com