Interplastic Corporation makes no warranties regarding any material and/or samples described in this report. All
properties specified above are approximate and may vary from material delivered. Delivered material complies with
the Certificate of Analysis on each shipment of product. Interplastic Corporation makes no representations of fact
regarding the material except those specified above. Final determination of part, or application, and the suitability
of the material for the use contemplated, is the sole responsibility of the Buyer. Our technical sales representatives
will assist in developing procedures to fit individual requirements as a customer accommodation. All advice is
accepted at your risk and should be checked for suitability to your particular processes and needs. These test data
and properties are based on results obtained for a specific material under the specified test conditions. They are not
to be used as specifications and are not warranted as performance attributes for any product or system.
INTERPLASTIC CORPORATION
2015 Northeast Broadway Street
Minneapolis, Minnesota 55413-1775
651.481.6860 Fax 612.331.4235
www.interplastic.com
Revised: 01/2023
COR69-AB-320F is a promoted, thixotropic, mixed unsaturated polyester resin designed for use with fillers such as
calcium carbonate. The mixture is used as the polyester component in reinforced laminates.
This product code replaces the codes COR69-AB-802 and COR69-AB-010S.
This resin carries no specific warranty and is non-returnable.
LIQUID PROPERTIES RESULTS
Viscosity, Brookfield Model RV #3 Spindle @ 50 rpm, 77 F (25 C), cPs 120-180
Thixotropic Index 1.8-3.0
100 grams resin @ 77 F (25 C), initiated with 1.00% DDM-9 by volume *
Gel Time, min:sec 12:00-20:00
Hazardous Air Pollutant, (HAP Styrene) Content, % 45.0
* Gel time and reactivity will vary due to the type and concentration of Free Radical Initiator (catalyst), shop temperature, humidity, and type of fillers used. In order to meet
your individual needs, consult our technical sales representative for assistance.
Interplastic Corporation makes no warranties regarding any material and/or samples described in this report. All properties specified above are
approximate and may vary from material delivered. Delivered material complies with the Certificate of Analysis on each shipment of product.
Interplastic Corporation makes no representations of fact regarding the material except those specified above. Final determination of part, or
application, and the suitability of the material for the use contemplated, is the sole responsibility of the Buyer. Our technical sales
representatives will assist in developing procedures to fit individual requirements as a customer accommodation. All advice is accepted at your
risk and should be checked for suitability to your particular processes and needs. These test data and properties are based on results obtained
for a specific material under the specified test conditions. They are not to be used as specifications and are not warranted as performance
attributes for any product or system.
COR69-AB-320F
Mixed Resin
Technical Data Sheet