SIL95BA-40LH
Clear Casting Resin
Technical Data Sheet
INTERPLASTIC CORPORATION
3535 Latonia Avenue
Fort Wright, KY 41015-0159
859.292.7400 Fax: 859.292.7424
www.interplastic.com
SIL95BA-40LH is a promoted polyester resin for clear casting application. The styrene content
of this resin is less than 35%.
TYPICAL RESIN PROPERTIES @ 77 F RESULTS
Brookfield Viscosity @ 20 rpm 400 600
Brookfield Spindle No. (RVF) 2
Catalyst %, DDM-9 1.0
Gel Time minutes:seconds 14:00 25:00
Gel to Peak minutes:seconds 20:00 35:00
Peak Exotherm F 240 280
Solids % 65.0 67.0
Moisture % 0.15 Max
Revised: 7/06
All specifications and properties specified above are approximate. Specifications and properties of material delivered may vary slightly
from those given above. Interplastic Corporation makes no representations of fact regarding the material except those specified above.
No person has any authority to bind Interplastic Corporation to any representation except those specified above. Final determination of
the suitability of the material for the use contemplated is the sole responsibility of the Buyer. The Thermoset Resins Division’s technical
sales representatives will assist in developing procedures to fit individual requirements.