Technical Data Sheet
Effective: 19/08/2020 Supersedes: 25/07/2019
Page 1 of 3
Automotive Aftermarket Division
3M 36101/36102/36103/36104 Perfect-it Gelcoat Heavy
Cutting Compound
1) Part Numbers
36101 : 473ml
36102 : 946ml
36103 : 3.6l
36104 : 18.9l
2) Description and end uses
3M Perfect-It Gelcoat Medium Cutting Compound + Wax is designed to remove
P800 and finer sand scratches with a 3M compounding pad. It is designed to work
over a broad range of climates. Its non-gritty formula works on all types of gelcoat
surfaces, leaving an extremely fine finish with easy clean up. To reduce compounding
time, refine sanding marks with 3M Trizact 1500 before compounding.
3) Physical Properties
Container Various (See Above)
Colour Cream
Flash Point – C No Flash @ 20 C, 38 C, 60 C or 93 C
Viscosity (CPS) Brookfield
Viscometer
30,000 40,000 cps @ 25 C
Solids Content (Appx.) Trade Secret
Solvent 14.5% VOC
Technical Data Sheet
Effective: 19/08/2020 Supersedes: 25/07/2019
Page 2 of 3
4) Directions for Use
Compound between 1200 and 2000 rpm using a buffer equipped with a 3M wool or
3M foam compounding pad.
1. Apply enough material to work a 2` x 2` area with a thin film throughout the buffing
process. The product is designed to be used wet and buffed with a thin film.
Important: If too much compound is applied to the surface, product may create a
heavy film that reduces workability. If this occurs, remove excess material from both
panel and pad surfaces. Spur buffing pad as necessary.
2. Start buffing with medium pressure between 1200 and 2000 rpm. For optimal finish,
as the product begins to dry, reduce pressure at end of buffing cycle. Product can be
buffed or wiped dry.
3. Use a soft cloth to remove any residual film and/or sling before moving on to another
panel or before polishing.
4. For added protection apply 3M Boat Wax (36112/36113) after compounding is
completed.
5) Storage
Keep from freezing.
6) Safety
Refer to product label and safety data sheet for health and safety information before
using the product.
3M 36101/36102/36103/36104 Perfect-it Gelcoat Heavy Cutting Compound is
designed FOR PROFESSIONAL INDUSTRIAL USE ONLY.
7) Disclaimer
All statements, technical information and recommendations are based on tests we
believe to be reliable as at the date of hereof, but the accuracy or completeness
thereof is not guaranteed. Please ensure before using the product that it is suitable
for your intended use. Since the conditions and methods of use of the product and of
the information referred to herein are beyond our control, other than for fraudulent
Technical Data Sheet
Effective: 19/08/2020 Supersedes: 25/07/2019
Page 3 of 3
misrepresentation, 3M expressly disclaims any and all liability as to any results
obtained or arising from any use of the product or reliance on such information
For Additional Health and Safety Information
3M United Kingdom plc
Automotive Aftermarket
3M Centre,
Cain Road,
Bracknell,
RG12 8HT
Tel: +44 (0)161 237 6391
aadukenquiries@mmm.com
www.3Mbodyshop.co.uk
3M Ireland Limited
Automotive Aftermarket
The Iveagh Building
Carrickmines Park
Carrickmines , Dublin 18
Tel: +353 12160301
aadukenquiries@mmm.com
www.3Mbodyshop.co.uk
3M Denmark a/s
Automotive Aftermarket
Hannemanns All 53
2300 K benhavn S
Tel: +45 43480100
aadukenquiries@mmm.com
www.3MAuto.dk
3M Finland, Suomen 3M Oy
Automotive Aftermarket
Keilaranta 6
02150 Espoo
Tel: 09 5252 1
aadukenquiries@mmm.com
www.3M.fi/autotuotteet
3M Svenska AB
Automotive Aftermarket
Herrj rva torg 4
170 67 Solna
Tel: 08-922100
aadukenquiries@mmm.com
www.3M.se/bileftermarkad
3M Norge AS
Automotive Aftermarket
Kanalveien 2
2004 Lillestr m
Tel: 06384
aadukenquiries@mmm.com
www.3m.no/auto
3M Latvija
K.Ulmana 5
Riga, LV-1004
Tel: +371 67066120
aadukenquiries@mmm.com
www.3m.lv
3M Eesti OU
P rnu mnt. 158
11317 Tallinn
Tel: +372 6 115 902
aadukenquiries@mmm.com
www.3m.ee
3M Lietuva
A.Go tauto str. 40 A
LT-01112 Vilnius
Tel: +370 5 2160780
aadukenquiries@mmm.com
www.3m.lt
3M 2020. 3M, Perfect-It and Trizact are all trademarks of the 3M company. All rights reserved