Direction for Use
Recommended Procedure
This material is ready-to-use and requires no
dilution. Best application is achieved by applying a
thin coating using a wiping brushing or spraying. The
ideal application evenly wets the surface and dries to
a glossy layer of mold release. Over-application can
result in drips, runs or puddles of release can cause
part defects. If over applied, remove the excess with
an absorbent cloth prior to molding. Some customers
find a brush useful to even out the Stoner
M802
Mold Release on complicated molds. Best results
are obtained when release is applied shortly before
molding. Treated molds heated for more than 30
minutes at 250 F may require touch-up prior to molding.
Call for special instructions if parts will be painted,
glued or over-molded.
Storage and Handling
See SDS for complete instruction prior to use. Do not
use near ignition sources. Do not expose container
to heat or store at temperatures above 120 F. This
product is contains flammable solvents and proper
ventilation and static controls should be used. Proper
eye and skin protection should be used and some
operators prefer to wear an apron when applying
release or handling parts.
Packaging
Stoner
M802 Urethane Mold Release is available in:
5-gallon pails & 55-gallon drum
Part # M802 (Solvent Based)
Technical Assistance
Call: 800-227-5538 or 1 (717) 786-7355
Email: CustomerService@StonerMolding.com
Visit: StonerMolding.com
NO RISK GUARANTEE . Stoner Molding guarantees 100% satisfaction or your
money back. If you re ever dissatisfied with any Stoner Molding product, simply
return the unused portion for a full refund.
Product Description
Stoner
M802 Urethane Mold Release is specially
formulated as a release agent and anti-stick lubricant
for molded urethanes and similar materials. Provides
fast, easy part removal from molds and multiple part
releases per application. Improves molding efficiency
in many processes including injection, pour cast,
and extrusion molding. Economical a light coating
produces best results.
M802 Urethane Mold Release ADVANTAGES:
Saves time lets you remove urethane parts
from molds quickly and easily.
Fast evaporating for rapid molding at ambient
temperatures and above.
Improves part appearance and reduces defects
caused by sticking.
Contains no Class I or Class II Ozone Depleting
Substances
Contains no chlorinated solvents such as
1,1,1 trichloroethane or methylene chloride.
Colorless and non-staining.
Uses
Stoner
M802 Urethane Mold Release is a release
agent and anti-stick lubricant for molded urethanes and
similar materials.
PRODUCT INFORMATION
Stoner
M802
Urethane Mold Release
Rev 19.7
Made
inUSA
StonerMolding.com
1070 Robert Fulton Hwy. Quarryville, PA 17566 1-800-227-5538 1-717-786-7355