TR INDUSTRIES
11022 Vulcan Street
South Gate, CA 90280
Phone 562-923-0838 Fax 562-861-3475
RELEASES COMPOUNDS POLISHES
TR-111
SLURRY WAX RELEASE
FLANGES EDGES HATS
DESCRIPTION:
A soft white compounded wax based on refined petroleum waxes. Leaves no discoloration to molded
parts and contains no silicones.
PRODUCT FEATURES:
Easy spreading and wipe characteristics
Provides positive releases, remains soft and ease of removal
Effectively fills rough surfaces and is PVA compatible
Good thermal stability with reduced build up
USES:
For all mold flanges, edges and hats in cultured marble, onyx or granite production, FRP Tubs, showers,
spa fabrication, polymer concrete and general polyester molding applications. Any surface where gloss
or cosmetics is not a critical requirement for finished part. Sealer on porous substrates for prototypes and
mock-ups or in conjunction with PVA sprayed film.
APPLICATION:
Apply a minimum of two coats with brush or cloth allowing each coat to dry prior to applying additional
coats. This provides a base film for initial release. Apply again lightly after first part is pulled and then
subsequent coats as needed. Applications will vary dependent on surface conditions, molding cycle,
fabrication methods and general shop practices.
Available in gallon 4×1/cases, 5 gallon and 55 gallon drum. Please contact your local TR distributor or
call direct.
The information contained herein is based on tests considered to be reliable and accurate. Because of the wide variance of
associated materials and conditions, no warranty is expressed or implied. Each user is encouraged to prepare a test part for
their particular application.