March 2016
458 Isopropyl Alcohol
Shell Chemicals
Technical Datasheet
Isopropyl Alcohol
Product Code
Region
Product Category
CAS Registry Number
Synonym(s)
Description
S1111
North America
Alcohols
67-63-0
2-propanol, IPA
Isopropyl Alcohol (IPA) is a solvent for epoxy and acrylic resins. ethyl
cellulose, polyvinyl butyral, alkaloids, gums, shellac, natural resins,
and many essential oils. It functions as a latent solvent in solvent
systems for nitrocellulose. It is a medium evaporating solvent and is
completely miscible with most solvents.
Typical Properties
Property Unit Method Value
Purity, min. %m/m GC 99.8
Water %m/m ASTM D1364 0.03
Acidity (as Acetic Acid) %m/m ASTM D1613 0.001
Density at 20 C kg/l ASTM D4052 0.785
Specific Gravity at 20 C/20 C – ASTM D4052 0.786
Specific Gravity at 25 C/25 C – ASTM D4052 0.783
Coefficient of Cubic Expansion at 20 C 10
-4
/ C Calculated 11
Refractive Index at 20 C – ASTM D1218 1.377
Color Pt-Co ASTM D1209 < 5
Boiling Point C - 82
Relative Evaporation Rate (nBuAc=1) - ASTM D3539 1.5
Relative Evaporation Rate (Ether=1) - DIN 53170 11
Antoine Constant A
#
kPa. C - 6.86618
Antoine Constant B
#
kPa. C - 1360.13
Antoine Constant C
#
kPa. C - 197.592
Temperature Limits for Antoine Equation
#
C - -10 to +90
March 2016
458 Isopropyl Alcohol
Vapor Pressure at 20 C kPa Calculated 4.1
Vapor Pressure at 50 C kPa Calculated 24
Saturated Vapor Concentration at 20 C g/m
3
Calculated 102
Volatile Organic Compound (VOC) g/l EU / EPA 785
Flash Point (Abel) C IP 170 12
Auto Ignition Temperature C ASTM E659 425
Lower Explosion Limit %v/v - 2.0
Upper Explosion Limit %v/v - 12
Electrical Conductivity at 20 C pS/m ASTM D4308 6*10
6
Dielectric Constant at 20 C - - 18.6
Freezing Point C - -88
Surface Tension at 20 C mN/m - 23
Viscosity at 20 C mPa.s - 2.4
Hildebrand Solubility Parameter (cal/cm
3
)
1/2
- 11.5
Hydrogen Bonding Index - - -16.7
Fractional Polarity - - 0.178
Heat of Vaporization at T
boil kJ/kg - 664
Heat of Combustion (Net) at 25 C kJ/kg - 31000
Specific Heat at 20 C kJ/kg/ C - 2.56
Thermal Conductivity at 20 C W/m/ C - 0.14
Miscibility at 20 C: Solvent in water %m/m - complete
Miscibility at 20 C: Water in solvent %m/m - complete
Azeotrope with Water: Boiling Point C - 80.3
Azeotrope with Water: Solvent Content %m/m - 87.4
Molecular Weight g/mol - 60
(#) In the Antoine temperature range, the vapor pressure P (kPa) at temperature T ( C) can be calculated by
means of the Antoine equation: log P = A - B/(T+C)
Test Methods
Copies of copyrighted test methods can be obtained from the issuing organisations:
American Society for Testing and Materials (ASTM) : www.astm.org
Energy Institute (IP) : www.energyinst.org.uk
Deutsches Institut f r Normung (DIN) : www.din.de
N.B: For routine quality control local test methods may be applied. Such methods have been validated against those
mentioned in this datasheet.
March 2016
458 Isopropyl Alcohol
Quality
Isopropyl Alcohol as produced and delivered complies with ACS 10th Edition Reagent Grade
(General Use), ASTM D770, DIN 53245 and FED MIL Spec TT-I-735A.
Isopropyl Alcohol does not contain detectable quantities of polycyclic aromatics, heavy metals or
chlorinated compounds.
Hazard Information
For detailed Hazard Information please refer to the Safety Data Sheet on ww.shell.com/chemicals.
Storage Handling
Provided proper storage and handling precautions are taken we would expect Isopropyl Alcohol to be
technically stable for at least 12 months. For detailed advice on Storage and Handling please refer to
the Safety Data Sheet on www.shell.com/chemicals.
All products purchased or supplied by Shell chemicals companies are subject to the terms and conditions set out
in the contract, order confirmation and/or bill of lading. All other information supplied by Shell chemicals
companies, including that herein, is considered accurate but is furnished upon the express condition that the
customer shall make its own assessment to determine a product s suitability for a particular purpose. Except as
may be set forth in the applicable contract, order confirmation and/or bill of lading, Shell chemicals companies
make no warranty, express or implied, including regarding any information supplied or the data upon which it is
based or the results to be obtained from the use of such products or information, or concerning product, whether
of satisfactory quality, merchantability, fitness for any particular purpose or otherwise, or with respect to
intellectual property infringement as a result of use of information or products, and none shall be implied.
The expression Shell Chemicals refers to the companies of the Royal Dutch/Shell Group that are engaged in
chemical businesses. Each of the companies that make up the Royal Dutch/Shell Group of companies is an
independent entity and has its own separate identity.