Our Products are intended for sale to industrial and commercial customers. We request that Customers inspect and test our products before use and satisfy themselves as to
contents and suitability. Nothing herein shall constitute a warranty, expressed or implied, including any warranty or merchantability or fitness, nor is protection from any
law of patent to be inferred. All patent rights are reserved. The exclusive remedy for all proven claims is replacement of our materials and in no event shall we be liable for
special , incidental or consequential damages
Last updated 14
th
Jan 2005 ISO 9001:2000 Registered Company
DURA TECHNOLOGIES
804-024
World Class Coatings
Technology
FAST POLYESTER BONDING PUTTY
Medium viscosity
____________________________________________________________________________________________
Dura Technologies 804-024 is a clear iso-npg based polyester bonding putty. This is the medium viscosity
grade putty.
PERFORMANCE BENEFITS
Low sag/high thixotropy
Excellent adhesion
Fast cure
Spreads easily and uniformly
Minimal shrinkage
Low yellowing
TYPICAL UNCURED PROPERTIES
Gel time @77F, 2% MEKP-925 … …6-10 minutes
Full cure time @77 F ..30 minutes
Viscosity @77 F … .Medium Putty
Weight per gallon ..11.65lbs/gal
Maximum VOC ………………………0.44lbs/gal
(Assumes all styrene evaporates. Local regulations vary. Consult your local AQMD
to determine actual VOC in use)
USAGE GUIDELINES
Read and understand the MSDS for this and any other products you are mixing with it before proceeding
MEKP levels should be kept at 2%. MIX THOROUGHLY. Mix only the amount that can be used in 5
minutes
Do not apply putties below 64F
Ensure surfaces are clean and dry. When grinding cured patches, wear a dust mask
Mask areas which must be kept clean
Avoid stressing joints before full cure has occurred
SHELF LIFE
This product is stable for three months from date of production when stored away from sunlight at no more than
77F. Extended storage will result in significant loss of cure and a drop in viscosity. Elevated temperatures will
shorten shelf life further