VIBRIN
G440LW
POLYESTER GEL COAT
POLYESTER GEL COAT FOR CLEAR SANITARY
WARE APPLICATIONS
Typical properties are not to be construed as specifications.
DESCRIPTION
Vibrin G440LW is a prepromoted, thix-
otropic, neopentyl glycol isophthalic
polyester gelcoat designed for spray
applications. It is designed for use in
synthetic marble applications.
BENEFITS
Low HAP content allows product to
meet composites MACT standards
Superior UV stability over conven-
tional products
Superior physical properties give
excellent thermal shock test re-
sults
Typical test results are more than
twice the ANSI Z124 thermal cycle
test requirement
Lower styrene emissions reduce
occupational exposures
Improved transfer efficiency with
less overspray generates less
waste
No loss in processing characteris-
tics over conventional products.
Gives excellent color, clarity, air
release and flow characteristics.
Pour times at 30-60 minutes are
typical
Typical Liquid Properties
2
Test Unit of Measure Nominal
Viscosity @ 77 F/25 C, RVF Brookfield
Spindle #4 @ 20 RPM
cps 3200-4200
Thix Ratio 2:20 rpm 6.0-7.5
Gel Time @ 77 F/25 C,
(1.5% of a 9% active oxygen MEKP)
minutes 4.0 6.0
Exotherm Time minutes 6.0 12.0
Exotherm Temperature C 190-220
Film Cure minutes 45 60
HAP Content % <40
Typical Cast Mechanical Properties
1
Test Unit of Measure Nominal Test Method
Tensile Strength psi 12,100 ASTM D 638
Tensile Modulus psi 600,000 ASTM D 638
Tensile Elongation % 2.5 ASTM D 638
Flexural Strength psi 22,100 ASTM D 790
Flexural Modulus psi 620,000 ASTM D 790
Heat Distortion Temp. F/ C @264 psi 167/75 ASTM D 648
AOC World Headquarters
955 Highway 57 East, Collierville, TN 38017
+01 901.854.2800
AOC-Resins.com
SALES CONTACTS
NORTH AMERICA
Toll free: +1 866 319 8827
northamerica@aoc-resins.com
EUROPE
+44 1206 390415
europe@aoc-resins.com
INDIA
+44 1206 390415
india@aoc-resins.com
LATIN AMERICA
+01 863 815 5016
latinamerica@aoc-resins.com
AOC UK LTD.
+44 01206 390400
salesUK@aoc-resins.com
ASIA/AUSTRALIA
+44 1206 390415
asia@aoc-resins.com
MIDDLE EAST
+44 1206 390415
middleeast@aoc-resins.com
AOC is a registered trademark of AOC, LLC.
The information contained in this data sheet is based on laboratory data and field experience. We believe this information to be reliable, but do not guarantee its applicability to the user s process or
assume any liability for occurrences arising out of its use. The user, by accepting the products described herein, agrees to be responsible for thoroughly testing each such product before commit-
ting to production. Our recommendations should not be taken as inducements to infringe any patent or violate any law, safety code or insurance regulation. This data sheet and its contents are the
confidential and proprietary information of AOC and it may not be modified altered deconstructed or presented in any other manner without the explicit authorization of AOC and/or its legal counsel.
VIBRIN
G440LW POLYESTER GEL COAT
PERFORMANCE GUID ELINES
A. All AOC thixotropic polyester gel
coats should be mixed well prior to
use.
B. MEKP levels should be kept be-
tween 1.0% and 2.5%
C. Gel coats should not be applied
below 64 F/18 C.
D. Recommend spraying 3 passes
at 5-8mils allowing a short flash
time between passes
ISO 9001:2008 CERTIFIED
The Quality Management Systems
at
every AOC manufacturing facility
have been certified as meeting ISO
9001:2008 standards. This certifi-
cation recognizes that each AOC
facility has an internationally ac-
cepted model in place for managing
and assuring quality. We follow the
practices set forth in this model to
add value to the resins we make for
our customers.
FOOTNOTES
(1) Based on tests at 77 F/25 C and 50%
relative humidity. All tests performed on
unreinforced castings. Thixotropic components
are excluded from casting samples. Castings
were post cured.
(2) The gel times shown are typical but may be
affected by catalyst, promoter, inhibitor con-
centration, resin, mold, and shop temperature.
Variations in gelling characteristics can be
expected between different lots of catalysts
and at extremely high humidities. Pigment
and/or filler can retard or accelerate gelation.
It is recommended that the fabricator check
the gelling characteristics of a small quantity of
resin under actual operating conditions prior to
use.
Pub. VIBRIN G440LW
Effective Date: April 2017
Copyright 2017
STORAGE STABILITY
This product is stable for three
months from the date of manufac-
ture when stored in the original con-
tainers, away from direct sunlight or
other UV light sources and at or be-
low 77 F/25 C.
Storage at elevated temperatures
will reduce shelf life.
After extended storage, some drift
may occur in gel time or viscosity.
SAFETY
See the appropriate Safety Data
Sheet for guidelines.