VIBRIN
G130LQ
POLYESTER GEL COAT
POLYESTER GEL COAT FOR
SANDING APPLICATIONS
Typical properties are not to be construed as specifications.
DESCRIPTION
Vibrin G130LQ is a fully promoted,
thixotropic, polyester gel coat for
spray applications. Primer paint
colors are suggested.
BENEFITS
Excellent sandability and pro-
cessability make the product
ideal for the production of parts
that are later painted such as in
the transportation and recrea-
tional vehicle markets.
Good Elongation
Fast cure
Resistant to porosity
Low HAP levels enable the
product to meet MACT stand-
ards
Less overspray allowing im-
proved transfer efficiency
Lower styrene emissions re-
duce occupational exposures
Typical Liquid Properties
1
Test Unit of Measure Nominal
Viscosity @ 77 F/25 C, RVF Brookfield
Spindle #4 @ 20 rpm
cps 3,800 – 5,200
Thix Ratio 2:20 rpm 5.0 – 7.0
Gel Time @ 77 F/25 C
(1.5% of a 9% active oxygen MEKP)
minutes 3.5 – 9.5
Exotherm Time minutes 8.0 – 11.0
Exotherm Temperature C 130-180
HAP Content %
<28% colors
<28% whites
AOC World Headquarters
955 Highway 57 East, Collierville, TN 38017
+01 901.854.2800
AOC-Resins.com
SALES CONTACTS
NORTH AMERICA
Toll free: +1 866 319 8827
northamerica@aoc-resins.com
EUROPE
+44 1206 390415
europe@aoc-resins.com
INDIA
+44 1206 390415
india@aoc-resins.com
LATIN AMERICA
+01 863 815 5016
latinamerica@aoc-resins.com
AOC UK LTD.
+44 01206 390400
salesUK@aoc-resins.com
ASIA/AUSTRALIA
+44 1206 390415
asia@aoc-resins.com
MIDDLE EAST
+44 1206 390415
middleeast@aoc-resins.com
AOC is a registered trademark of AOC, LLC.
The information contained in this data sheet is based on laboratory data and field experience. We believe this information to be reliable, but do not guarantee its applicability to the user s process or
assume any liability for occurrences arising out of its use. The user, by accepting the products described herein, agrees to be responsible for thoroughly testing each such product before commit-
ting to production. Our recommendations should not be taken as inducements to infringe any patent or violate any law, safety code or insurance regulation. This data sheet and its contents are the
confidential and proprietary information of AOC and it may not be modified altered deconstructed or presented in any other manner without the explicit authorization of AOC and/or its legal counsel.
VIBRIN
G130LQ POLYESTER GEL COAT
PERFORMANCE GUID ELINES
A. All AOC thixotropic polyester gel-
coats should be mixed well prior to
use.
B. MEKP levels should be kept be-
tween 1.0% and 2.5%
C. Gel coats should not be applied
below 64 F/18 C.
D. Spray 3 passes at 5-8 mils allowing
a short flash time between passes.
ISO 9001:2008 CERTIFIED
The Quality Management Systems at
every AOC manufacturing facility have
been certified as meeting ISO
9001:2008 standards. This certifica-
tion recognizes that each AOC facility
has an internationally accepted model
in place for managing and assuring
quality. We follow the practices set
forth in this model to add value to the
resins we make for our customers.
FOOTNOTES
(1) The gel times shown are typical but may be
affected by catalyst, promoter, inhibitor concentra-
tion, resin, mold, and shop temperature. Variations
in gelling characteristics can be expected between
different lots of catalysts and at extremely high
humidities. Pigment and/or filler can retard or
accelerate gelation. It is recommended that the
fabricator check the gelling characteristics of a
small quantity of resin under actual operating
conditions prior to use.
Pub. Vibrin G130LQ
Effective Date: April 2017
Copyright 2017
STORAGE STABILITY
Resins are stable for three months
from date of production when
stored in the original containers
away from sunlight at no more than
70 F/21 C.
During the hot summer months, no
more than two months stability at
86 F/30 C should be anticipated.
After extended storage, some drift
may occur in gel time and viscosity.
Storage in plastic totes made out
of materials such as polyethylene
(PE) or polypropylene (PP), in partic-
ular translucent PE/PP, will acceler-
ate gel formation and result in a
significantly reduced storage stabil-
ity.
Storage of this resin outdoors in
translucent plastic totes may re-
duce the storage stability to only a
few weeks. AOC cannot assume
responsibility for gel formation un-
der these storage conditions.
SAFETY
See the appropriate Material Safety
Data Sheet for guidelines.