Continued on next page
PRODUCT BULLETIN
www.axson-technologies.com 800.344.7776 axsonmh@axson.com
31200 Stephenson Hwy Madison Heights, MI 48071 Ph 248.588.2270 Fax 248.588.5909
DESCRIPTION
EA-001 is a single-component urethane adhesive that can be used to bond a variety of substrates on interior or exterior applications.
This dispensable adhesive has an adequate working life and will reach handling strength within 4 hours. EA-001 will bond
Polyurethane Boards, wood, stone, metal, concrete, masonry, plastics, styrofoam and more. There is no mixing required and once
cured the EA-001 is 100% waterproof making it an excellent adhesive for any repair inside or out.
TYPICAL HANDLING CHARACTERISTICS @ 77 F (25 C)
Density ………………………………………………………………………………………………………………………………………………… 1.13 g/cc
………………………………………………………………………………………………………………………………………………… 9.4 lbs/gal
Viscosity ………………………………………………………………………………………………………………………………………………. Dispensable Liquid
Work Life ……………………………………………………………………………………………………………………………………………… 20 minutes
Cure to Handling Strength ………………………………………………………………………………………………………………………. 4 hours
Complete Cure ……………………………………………………………………………………………………………………………………… 24 hours
Cure below 70 F (21 C) ………………………………………………………………………………………………………………………… up to 48 hours
Color ……………………………………………………………………………………………………………………………………………………. Amber
Machineability ……………………………………………………………………………………………………………………………………….. Excellent
Shelf Life (in original unopened containers) ………………………………………………………………………………………………. 1 year
STORAGE
1. If product is in a plastic bottle, remove any airspace in the bottle by squeezing the material towards the top of bottle and
immediately replace and tighten spout cap. This will remove any air in the bottle and prolong shelf life.
2. Any material that hardens in the spout cap during storage can be easily removed or knocked out using a small drill bit,
metal punch or scribe.
TYPICAL TENSILE ADHESION STRENGTH TEST
Adhesion to: 15# Density Urethane Foam ………………………………………………………………. Substrate Failure @ 522psi (4MPa)
20# Density Urethane Foam ………………………………………………………………. Substrate Failure @ 576psi (4MPa)
30# Density Urethane Foam ………………………………………………………………. Substrate Failure @ 766psi (5MPa)
40# Density Urethane Foam ………………………………………………………………. Substrate Failure @ 1,188psi (8MPa)
Mahogany Wood ……………………………………………………………………………… Substrate Failure @ 454psi (3MPa)
Concrete …………………………………………………………………………………………. Substrate Failure @ 1,160psi (8MPa)
Steel (rusty surface) …………………………………………………… Substate Failure of rusty surface @ 1,540psi (11MPa)
Steel (clean shiny sanded surface) …………………………………………………….. Adhesive Failure @ 1,561psi (11MPa)
EA-001
ONE COMPONENT
ADHESIVE
AXSON TECHNOLOGIES US
+1 248 588 2270
axsonmh@axson.com
axson-na.com
CHINA
+86 21 58 68 30 37
marketing.china@axson.com
GERMANY
+49 6 07 44 07 11-0
verkauf@axson.com
INDIA
+91 20 25 56 07 10-11
info.india@axson.com
ITALY
+39 02 96 70 23 36
axson@axson.it
JAPAN
+81 5 64 26 25 91
sales.japan@axson.com
FRANCE
Global Headquarters
+33 1 34 40 34 60
axson@axson.com
axson-technologies.com
MEXICO
+52 55 52 64 49 22
marketing@axson.com.mx
MIDDLE EAST
+971 7 2432227
axsonmideast@axson.com
SLOVAKIA
+42 1 76 42 25 26
axson.sk@axson.com
SPAIN
+34 9 32 25 16 20
spain@axson.com
U.K.
+44 16 38 66 00 62
sales.uk@axson.com
EA-001 Continued
INSTRUCTIONS FOR USE
1. Bonding surfaces must be clean, free of dust and fit tightly together. Sand any smooth or shiny surfaces to create a rough
texture for the adhesive to lock into. Clean oil contaminated metal surfaces with MEK solvent or lacquer thinner, thoroughly dry and
sand. Please note that EA-001 will not expand into gaps or fill loose joints so bonding surfaces should mate well together.
2. Lightly dampen surfaces to be bonded using a water dampened cloth or water spray mist bottle. EA-001 adhesive requires
moisture to cure however do not saturate surfaces. The optimum substrate moisture content is between 10-25%.
3. Spread a thin layer of EA-001 to both surfaces using a disposble brush or plastic spreader. Use a minimum of oz. per
square foot on each bonding surface (example: a 4 oz. bottle covers 4 square feet of surface A plus 4 square feet of surface B ).
4. Clamp the pieces together or use heavy objects to create pressure. Leave the clamps in place for at least 4 hours until the EA-
001 reaches a cure to handling strength.
EA-001 Tech/Revised 12/30/14
Supersedes 6/10/14
The information contained in this technical data sheet results from research and tests conducted in our laboratories under precise conditions. Seller
cannot anticipate all conditions under which seller s products, or the products of other manufacturers in combination with seller s products, may be used.
It is the responsibility of the user to determine the suitability of the Axson Technologies products, under their own conditions, before commencing with
the proposed application. In no event shall Axson Technologies, Inc. be liable for any direct, indirect, punitive, incidental, special, and/or consequential
damages, to property or life, whatsoever arising out of or connected with the use or misuse of our products.