Epoxy Clear Standard Hardener
Safety Data Sheet 80LS-20B
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
Revision date: 05/15/2023
05/15/2023 EN (English US) SDS ID: 80LS-20B Page 1
SECTION 1: Identification
1.1. Identification
Product form : Mixture
Trade name : Epoxy Clear Standard Hardener
CAS-No. : Mixture
Product code : 80LS-20B
Formula : N/A
Other means of identification : Hardner
1.2. Recommended use and restrictions on use
Use of the substance/mixture : Clear Laminating Hardener
1.3. Supplier
Dura Technologies, Inc.
2720 South Willow Avenue #A
Bloomington, CA 92316
909-546-1162
ChemTrec US: 800.424.9300
ChemTrec Int: +1 70 3527 3887
1.4. Emergency telephone number
Emergency number : ChemTrec US: 800.424.9300 Int: +1 70 3527 3887
SECTION 2: Hazard(s) identification
2.1. Classification of the substance or mixture
GHS US classification
Acute toxicity (oral) Category 4 H302 Harmful if swallowed
Acute toxicity (inhalation:dust,mist) Category 4 H332 Harmful if inhaled
Skin corrosion/irritation Category 1 H314 Causes severe skin burns and eye damage
Serious eye damage/eye irritation Category 1 H318 Causes serious eye damage
Skin sensitization, Category 1 H317 May cause an allergic skin reaction
Hazardous to the aquatic environment – Acute Hazard Category 3 H402 Harmful to aquatic life
Hazardous to the aquatic environment – Chronic Hazard Category 2 H411 Toxic to aquatic life with long lasting effects
Full text of H statements : see section 16
2.2. GHS Label elements, including precautionary statements
GHS US labeling
Hazard pictograms (GHS US) :
Signal word (GHS US) : Danger
Hazard statements (GHS US) : H302+H332 – Harmful if swallowed or if inhaled
H314 – Causes severe skin burns and eye damage
H317 – May cause an allergic skin reaction
H318 – Causes serious eye damage
H402 – Harmful to aquatic life
H411 – Toxic to aquatic life with long lasting effects
Precautionary statements (GHS US) : P260 – Do not breathe dust/fume/gas/mist/vapors/spray.
P261 – Avoid breathing dust/fume/gas/mist/vapors/spray.
P264 – Wash hands, forearms and face thoroughly after handling.
P270 – Do not eat, drink or smoke when using this product.
P271 – Use only outdoors or in a well-ventilated area.
P272 – Contaminated work clothing must not be allowed out of the workplace.
P273 – Avoid release to the environment.
P280 – Wear protective gloves/protective clothing/eye protection/face protection.
P301+P312 – If swallowed: Call a poison center or doctor if you feel unwell.
Epoxy Clear Standard Hardener
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
05/15/2023 EN (English US) SDS ID: 80LS-20B 2/11
P301+P330+P331 – If swallowed: rinse mouth. Do NOT induce vomiting.
P302+P352 – If on skin: Wash with plenty of water.
P303+P361+P353 – If on skin (or hair): Take off immediately all contaminated clothing. Rinse
skin with water/shower.
P304+P340 – If inhaled: Remove person to fresh air and keep comfortable for breathing.
P305+P351+P338 – IF IN EYES: Rinse cautiously with water for several minutes. Remove
contact lenses, if present and easy to do. Continue rinsing.
P310 – Immediately call a poison center or doctor.
P312 – Call a poison center or doctor if you feel unwell.
P321 – Specific treatment (see supplemental first aid instruction on this label).
P330 – Rinse mouth.
P333+P313 – If skin irritation or rash occurs: Get medical advice/attention.
P363 – Wash contaminated clothing before reuse.
P391 – Collect spillage.
P405 – Store locked up.
P501 – Dispose of contents/container to hazardous or special waste collection point, in
accordance with local, regional, national and/or international regulation.
2.3. Other hazards which do not result in classification
No additional information available
2.4. Unknown acute toxicity (GHS US)
Not applicable
SECTION 3: Composition/Information on ingredients
3.1. Substances
Not applicable
3.2. Mixtures
Name Product identifier % GHS US classification
benzyl alcohol
(CAS-No.) 100-51-6 <= 34 Acute Tox. 4 (Oral), H302
Acute Tox. 4 (Inhalation), H332
isophorone diamine
(CAS-No.) 2855-13-2 <= 21 Acute Tox. 4 (Oral), H302
Skin Corr. 1, H314
Skin Sens. 1, H317
Aquatic Acute 3, H402
Aquatic Chronic 3, H412
m-phenylenebis(methylamine)
(CAS-No.) 1477-55-0 <= 19 Acute Tox. 4 (Oral), H302
Acute Tox. 4 (Dermal), H312
Acute Tox. 3 (Inhalation), H331
Skin Corr. 1, H314
Skin Sens. 1, H317
Aquatic Acute 3, H402
Aquatic Chronic 3, H412
1,3-bis(aminomethyl)cyclohexane
(CAS-No.) 2579-20-6 <= 18 Acute Tox. 4 (Oral), H302
Skin Corr. 1A, H314
Aquatic Acute 3, H402
Aquatic Chronic 3, H412
4-tert-butylphenol
(CAS-No.) 98-54-4 <= 13 Skin Irrit. 2, H315
Eye Dam. 1, H318
Aquatic Acute 2, H401
Aquatic Chronic 1, H410
Full text of hazard classes and H-statements : see section 16
SECTION 4: First-aid measures
4.1. Description of first aid measures
First-aid measures general : Never give anything by mouth to an unconscious person. IF exposed or concerned: Get
medical advice/attention.
First-aid measures after inhalation : Remove person to fresh air and keep comfortable for breathing. Remove victim to fresh air and
keep at rest in a position comfortable for breathing. Call a POISON CENTER or
doctor/physician if you feel unwell. Immediately call a poison center or doctor/physician.
First-aid measures after skin contact : Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower.
Immediately call a poison center or doctor/physician.
First-aid measures after eye contact : Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to
do. Continue rinsing. Immediately call a poison center or doctor/physician.
First-aid measures after ingestion : Rinse mouth. Do NOT induce vomiting. Call a POISON CENTER or doctor/physician if you feel
unwell. Immediately call a poison center or doctor/physician. Call a poison
center/doctor/physician if you feel unwell.
Epoxy Clear Standard Hardener
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
05/15/2023 EN (English US) SDS ID: 80LS-20B 3/11
4.2. Most important symptoms and effects (acute and delayed)
Potential Adverse human health effects and
symptoms
: Based on available data, the classification criteria are not met. Harmful if swallowed. Harmful if
inhaled.
Symptoms/effects : Causes severe skin burns and eye damage. Suspected of damaging fertility or the unborn
child.
Symptoms/effects after inhalation : Danger of serious damage to health by prolonged exposure through inhalation. Harmful if
inhaled.
Symptoms/effects after skin contact : Causes skin irritation. Caustic burns/corrosion of the skin.
Symptoms/effects after eye contact : Causes eye irritation. May cause severe irritation. Causes serious eye damage.
Symptoms/effects after ingestion : Swallowing a small quantity of this material will result in serious health hazard.
4.3. Immediate medical attention and special treatment, if necessary
Until victim can be cared for by specialized staff:
SECTION 5: Fire-fighting measures
5.1. Suitable (and unsuitable) extinguishing media
Suitable extinguishing media : Sand. Water spray. Dry powder. Foam. Carbon dioxide.
Unsuitable extinguishing media : Do not use a heavy water stream.
5.2. Specific hazards arising from the chemical
Fire hazard : Heating increases the fire hazard. Heating may cause a fire. Heating may cause a fire or
explosion. Insufficient data available on direct fire hazard (flashpoint > 100 C). Self-heating in
large quantities; may catch fire. Temperature above flashpoint: higher fire/explosion hazard.
5.3. Special protective equipment and precautions for fire-fighters
Firefighting instructions : Use water spray or fog for cooling exposed containers. Exercise caution when fighting any
chemical fire. Prevent fire-fighting water from entering environment.
Protection during firefighting : Do not enter fire area without proper protective equipment, including respiratory protection. Do
not attempt to take action without suitable protective equipment. Self-contained breathing
apparatus. Complete protective clothing.
SECTION 6: Accidental release measures
6.1. Personal precautions, protective equipment and emergency procedures
6.1.1. For non-emergency personnel
Emergency procedures : Ventilate spillage area. Evacuate unnecessary personnel.
6.1.2. For emergency responders
Protective equipment : Do not attempt to take action without suitable protective equipment. Equip cleanup crew with
proper protection. For further information refer to section 8: “Exposure controls/personal
protection”.
Emergency procedures : Ventilate area.
6.2. Environmental precautions
Avoid release to the environment. Prevent entry to sewers and public waters. Notify authorities if liquid enters sewers or public waters.
6.3. Methods and material for containment and cleaning up
Methods for cleaning up : Take up liquid spill into absorbent material. Soak up spills with inert solids, such as clay or
diatomaceous earth as soon as possible. Collect spillage. Store away from other materials.
Other information : Dispose of materials or solid residues at an authorized site.
6.4. Reference to other sections
See Heading 8. Exposure controls and personal protection. For further information refer to section 13.
SECTION 7: Handling and storage
7.1. Precautions for safe handling
Precautions for safe handling : Wear personal protective equipment. Wash hands and other exposed areas with mild soap and
water before eating, drinking or smoking and when leaving work. Provide good ventilation in
process area to prevent formation of vapor. Use only outdoors or in a well-ventilated area.
Avoid breathing dust/fume/gas/mist/vapors/spray. Do not breathe
dust/fume/gas/mist/vapors/spray. Obtain special instructions before use. Do not handle until all
safety precautions have been read and understood.
Hygiene measures : Wash hands, forearms and face thoroughly after handling. Wash contaminated clothing before
reuse. Do not eat, drink or smoke when using this product. Always wash hands after handling
the product.
Epoxy Clear Standard Hardener
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
05/15/2023 EN (English US) SDS ID: 80LS-20B 4/11
7.2. Conditions for safe storage, including any incompatibilities
Technical measures : Comply with applicable regulations.
Storage conditions : Keep only in the original container in a cool, well ventilated place away from : Keep container
closed when not in use. Store in a well-ventilated place. Keep cool.
Incompatible products : Strong bases. Strong acids.
Incompatible materials : Sources of ignition. Direct sunlight.
SECTION 8: Exposure controls/personal protection
8.1. Control parameters
1,3-bis(aminomethyl)cyclohexane (2579-20-6)
Not applicable
4-tert-butylphenol (98-54-4)
Not applicable
isophorone diamine (2855-13-2)
Not applicable
benzyl alcohol (100-51-6)
Not applicable
m-phenylenebis(methylamine) (1477-55-0)
ACGIH ACGIH Ceiling (mg/m ) 0.1 mg/m (m-Xylene alfa,alfa’-diamine; USA;
Momentary value; TLV – Adopted Value)
8.2. Appropriate engineering controls
Appropriate engineering controls : Ensure good ventilation of the work station.
Environmental exposure controls : Avoid release to the environment.
8.3. Individual protection measures/Personal protective equipment
Personal protective equipment:
Avoid all unnecessary exposure.
Hand protection:
Wear protective gloves.
Eye protection:
Chemical goggles or face shield. Safety glasses
Skin and body protection:
Wear suitable protective clothing
Respiratory protection:
Wear appropriate mask
Other information:
Do not eat, drink or smoke during use.
SECTION 9: Physical and chemical properties
9.1. Information on basic physical and chemical properties
Physical state : Liquid
Appearance : Clear, colorless liquid.
Color : clear
Odor : characteristic
Odor threshold : No data available
pH : No data available
Melting point : Not applicable
Freezing point : No data available
Epoxy Clear Standard Hardener
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
05/15/2023 EN (English US) SDS ID: 80LS-20B 5/11
Boiling point : >= 392 F
Flash point : >= 230 F
Relative evaporation rate (butyl acetate=1) : No data available
Relative evaporation rate (ether=1) : < 1 slower than ether
Flammability (solid, gas) : Non flammable.
Vapor pressure : <= 2 mm Hg
Relative vapor density at 20 C : No data available
Relative density : No data available
Relative density of saturated gas/air mixture : 1.02
Density : 1.02 kg/l
Solubility : No data available
Log Pow : No data available
Auto-ignition temperature : No data available
Decomposition temperature : No data available
Viscosity, kinematic : No data available
Viscosity, dynamic : No data available
Explosion limits : No data available
Explosive properties : No data available
Oxidizing properties : No data available
9.2. Other information
No additional information available
SECTION 10: Stability and reactivity
10.1. Reactivity
Thermal decomposition generates : Corrosive vapors.
10.2. Chemical stability
Stable under normal conditions. Not established.
10.3. Possibility of hazardous reactions
Not established.
10.4. Conditions to avoid
Direct sunlight. Extremely high or low temperatures.
10.5. Incompatible materials
Strong acids. Strong bases.
10.6. Hazardous decomposition products
fume. Carbon monoxide. Carbon dioxide. Thermal decomposition generates : Corrosive vapors.
SECTION 11: Toxicological information
11.1. Information on toxicological effects
Acute toxicity (oral) : Harmful if swallowed.
Acute toxicity (dermal) : Not classified
Acute toxicity (inhalation) : Harmful if inhaled.
ATE US (oral) 1147.717 mg/kg body weight
ATE US (dust, mist) 3.03 mg/l/4h
1,3-bis(aminomethyl)cyclohexane (2579-20-6)
LD50 oral rat 880 mg/kg (Rat, Oral)
ATE US (oral) 880 mg/kg body weight
4-tert-butylphenol (98-54-4)
LD50 oral rat > 2000 mg/kg (Rat; OECD 401: Acute Oral Toxicity; Experimental value)
LC50 Inhalation – Rat > 5.6 mg/l/4h (Rat; Experimental value)
isophorone diamine (2855-13-2)
LD50 oral rat 1030 mg/kg (Equivalent or similar to OECD 401, Rat, Male, Experimental value, Oral, 14
day(s))
Epoxy Clear Standard Hardener
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
05/15/2023 EN (English US) SDS ID: 80LS-20B 6/11
isophorone diamine (2855-13-2)
LD50 dermal rat > 2000 mg/kg body weight (OECD 402: Acute Dermal Toxicity, 24 h, Rat, Male / female,
Experimental value, Dermal, 14 day(s))
LC50 Inhalation – Rat > 5.01 mg/l (OECD 403: Acute Inhalation Toxicity, 4 h, Rat, Male / female, Experimental value,
Inhalation (aerosol), 14 day(s))
ATE US (oral) 1030 mg/kg body weight
benzyl alcohol (100-51-6)
LD50 oral rat 1620 mg/kg bw/day (Rat, Male, Experimental value, Oral)
LD50 dermal rabbit > 2000 mg/kg (Rabbit, Inconclusive, insufficient data, Dermal)
LC50 Inhalation – Rat > 4.178 mg/l air (OECD 403: Acute Inhalation Toxicity, 4 h, Rat, Male / female, Experimental
value, Inhalation (aerosol))
ATE US (oral) 1620 mg/kg body weight
ATE US (gases) 4500 ppmV/4h
ATE US (vapors) 11 mg/l/4h
ATE US (dust, mist) 1.5 mg/l/4h
m-phenylenebis(methylamine) (1477-55-0)
LD50 oral rat 930 mg/kg (Rat)
LD50 dermal rabbit 2000 mg/kg (Rabbit)
LC50 Inhalation – Rat 2.4 mg/l/4h (Rat)
ATE US (oral) 930 mg/kg body weight
ATE US (dermal) 2000 mg/kg body weight
ATE US (gases) 700 ppmV/4h
ATE US (vapors) 2.4 mg/l/4h
ATE US (dust, mist) 2.4 mg/l/4h
Skin corrosion/irritation : Causes severe skin burns and eye damage.
Serious eye damage/irritation : Causes serious eye damage.
Respiratory or skin sensitization : May cause an allergic skin reaction.
Germ cell mutagenicity : Not classified
Carcinogenicity : Not classified
Reproductive toxicity : Not classified
STOT-single exposure : Not classified
STOT-repeated exposure : Not classified
Aspiration hazard : Not classified
Viscosity, kinematic : No data available
Likely routes of exposure : Inhalation.
Potential Adverse human health effects and
symptoms
: Based on available data, the classification criteria are not met. Harmful if swallowed. Harmful if
inhaled.
Symptoms/effects : Causes severe skin burns and eye damage. Suspected of damaging fertility or the unborn
child.
Symptoms/effects after inhalation : Danger of serious damage to health by prolonged exposure through inhalation. Harmful if
inhaled.
Symptoms/effects after skin contact : Causes skin irritation. Caustic burns/corrosion of the skin.
Symptoms/effects after eye contact : Causes eye irritation. May cause severe irritation. Causes serious eye damage.
Symptoms/effects after ingestion : Swallowing a small quantity of this material will result in serious health hazard.
SECTION 12: Ecological information
12.1. Toxicity
Ecology – general : Dangerous for the environment. Harmful to aquatic life.
Ecology – water : Toxic to aquatic life with long lasting effects.
Epoxy Clear Standard Hardener
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
05/15/2023 EN (English US) SDS ID: 80LS-20B 7/11
1,3-bis(aminomethyl)cyclohexane (2579-20-6)
LC50 fish 1 130 mg/l (OECD 203: Fish, Acute Toxicity Test, 96 h, Leuciscus idus, Semi-static system,
Fresh water, Experimental value, GLP)
EC50 Daphnia 1 65.4 mg/l (OECD 202: Daphnia sp. Acute Immobilisation Test, 48 h, Daphnia magna, Static
system, Fresh water, Experimental value, GLP)
4-tert-butylphenol (98-54-4)
EC50 Daphnia 1 3.9 mg/l (EC50; 48 h)
LC50 fish 2 5.14 mg/l (LC50; 96 h)
Threshold limit algae 2 11.2 mg/l (EC50; 72 h)
isophorone diamine (2855-13-2)
LC50 fish 1 110 mg/l (EU Method C.1, 96 h, Leuciscus idus, Semi-static system, Fresh water,
Experimental value, GLP)
EC50 Daphnia 1 23 mg/l (OECD 202: Daphnia sp. Acute Immobilisation Test, 48 h, Daphnia magna, Static
system, Fresh water, Experimental value, GLP)
benzyl alcohol (100-51-6)
LC50 fish 1 460 mg/l (EPA OPP 72-1, 96 h, Pimephales promelas, Static system, Fresh water,
Experimental value, Nominal concentration)
EC50 Daphnia 1 230 mg/l (OECD 202: Daphnia sp. Acute Immobilisation Test, 48 h, Daphnia magna, Fresh
water, Experimental value, GLP)
ErC50 (algae) 770 mg/l (OECD 201: Alga, Growth Inhibition Test, 72 h, Pseudokirchneriella subcapitata,
Static system, Fresh water, Experimental value, GLP)
m-phenylenebis(methylamine) (1477-55-0)
EC50 Daphnia 1 16 mg/l (EC50; 48 h)
LC50 fish 2 > 100 mg/l (LC50; 96 h)
Threshold limit algae 1 12 mg/l (EC50; 72 h)
12.2. Persistence and degradability
Epoxy Clear Standard Hardener (Mixture)
Persistence and degradability May cause long-term adverse effects in the environment.
1,3-bis(aminomethyl)cyclohexane (2579-20-6)
Persistence and degradability Not readily biodegradable in water. Biodegradability in soil: no data available. Not established.
4-tert-butylphenol (98-54-4)
Persistence and degradability Readily biodegradable in water. Low potential for mobility in soil. Photolysis in the air.
ThOD
2.77 g O /g substance
isophorone diamine (2855-13-2)
Persistence and degradability Not readily biodegradable in water.
benzyl alcohol (100-51-6)
Persistence and degradability Biodegradable in the soil. Readily biodegradable in water.
Biochemical oxygen demand (BOD)
1.6 g O /g substance
Chemical oxygen demand (COD)
2.4 g O /g substance
ThOD
2.5 g O /g substance
m-phenylenebis(methylamine) (1477-55-0)
Persistence and degradability Not readily biodegradable in water.
12.3. Bioaccumulative potential
Epoxy Clear Standard Hardener (Mixture)
Bioaccumulative potential Not established.
1,3-bis(aminomethyl)cyclohexane (2579-20-6)
Log Pow 0.69 – 0.78 (Experimental value, OECD 107: Partition Coefficient (n-octanol/water): Shake
Flask Method, 21.5 – 24.7 C)
Bioaccumulative potential Low potential for bioaccumulation (Log Kow < 4). Not established.
4-tert-butylphenol (98-54-4)
BCF fish 1 120 (BCF; 3 h)
BCF fish 2 20 - 88 (BCF)
Epoxy Clear Standard Hardener
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
05/15/2023 EN (English US) SDS ID: 80LS-20B 8/11
4-tert-butylphenol (98-54-4)
BCF other aquatic organisms 1 34 (BCF; 24 h; Chlorella sp.)
BCF other aquatic organisms 2 240 (BCF; 5 h; Bacteria)
Log Pow 3 (Experimental value; OECD 117: Partition Coefficient (n-octanol/water), HPLC method; 23
C)
Bioaccumulative potential Low potential for bioaccumulation (BCF < 500).
isophorone diamine (2855-13-2)
BCF other aquatic organisms 1 3.16 (BCFWIN, QSAR)
Log Pow 0.99 (Experimental value, OECD 107: Partition Coefficient (n-octanol/water): Shake Flask
Method, 23 C)
Bioaccumulative potential Low potential for bioaccumulation (Log Kow < 4).
benzyl alcohol (100-51-6)
Log Pow 1 - 1.1 (Experimental value, 20 C)
Bioaccumulative potential Low potential for bioaccumulation (Log Kow < 4).
m-phenylenebis(methylamine) (1477-55-0)
BCF fish 1 < 2.7 (BCF)
Log Pow 0.15
Bioaccumulative potential Low potential for bioaccumulation (Log Kow < 4).
12.4. Mobility in soil
1,3-bis(aminomethyl)cyclohexane (2579-20-6)
Log Koc 1.473 (log Koc, Calculated value)
4-tert-butylphenol (98-54-4)
Log Koc log Koc,3.1; QSAR
isophorone diamine (2855-13-2)
Surface tension 3.47 N/m (23 C)
Log Koc 2.97 (log Koc, QSAR)
Ecology - soil Low potential for adsorption in soil.
benzyl alcohol (100-51-6)
Surface tension 39 mN/m (20 C)
Ecology - soil No (test)data on mobility of the substance available.
12.5. Other adverse effects
Other information : Avoid release to the environment.
SECTION 13: Disposal considerations
13.1. Disposal methods
Regional legislation (waste) : Disposal must be done according to official regulations.
Waste treatment methods : Dispose of contents/container in accordance with licensed collector s sorting instructions.
Sewage disposal recommendations : Do not discharge into drains.
Product/Packaging disposal recommendations : Dispose in a safe manner in accordance with local/national regulations. Dispose of
contents/container to hazardous or special waste collection point, in accordance with local,
regional, national and/or international regulation.
Ecology - waste materials : Avoid release to the environment.
SECTION 14: Transport information
Department of Transportation (DOT)
In accordance with DOT
Transport document description : UN2735 Polyamines, liquid, corrosive, n.o.s. (isophorone diamine ; 1,3-
bis(aminomethyl)cyclohexane), 8, I
UN-No.(DOT) : UN2735
Proper Shipping Name (DOT) : Polyamines, liquid, corrosive, n.o.s.
Epoxy Clear Standard Hardener
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
05/15/2023 EN (English US) SDS ID: 80LS-20B 9/11
Class (DOT) : 8 - Class 8 - Corrosive material 49 CFR 173.136
Packing group (DOT) : I - Great Danger
Hazard labels (DOT) : 8 - Corrosive
Dangerous for the environment : Yes
Marine pollutant : Yes
DOT Packaging Non Bulk (49 CFR 173.xxx) : 201
DOT Packaging Bulk (49 CFR 173.xxx) : 243
DOT Symbols : G - Identifies PSN requiring a technical name
DOT Special Provisions (49 CFR 172.102) : A3 - For combination packaging, if glass inner packaging (including ampoules) are used, they
must be packed with absorbent material in tightly closed metal receptacles before packing in
outer packaging.
A6 - For combination packaging, if plastic inner packaging are used, they must be packed in
tightly closed metal receptacles before packing in outer packaging.
B10 - MC 300, MC 301, MC 302, MC 303, MC 305, and MC 306 and DOT 406 cargo tanks,
and DOT 57 portable tanks are not authorized.
N34 - Aluminum construction materials are not authorized for any part of a packaging which is
normally in contact with the hazardous material.
T14 - 6 6 mm Prohibited 178.275(g)(3).
TP2 - a. The maximum degree of filling must not exceed the degree of filling determined by the
following: (image) Where: tr is the maximum mean bulk temperature during transport, tf is the
temperature in degrees celsius of the liquid during filling, and a is the mean coefficient of
cubical expansion of the liquid between the mean temperature of the liquid during filling (tf) and
the maximum mean bulk temperature during transportation (tr) both in degrees celsius. b. For
liquids transported under ambient conditions may be calculated using the formula: (image)
Where: d15 and d50 are the densities (in units of mass per unit volume) of the liquid at 15 C
(59 F) and 50 C (122 F), respectively.
TP27 - A portable tank having a minimum test pressure of 4 bar (400 kPa) may be used
provided the calculated test pressure is 4 bar or less based on the MAWP of the hazardous
material, as defined in 178.275 of this subchapter, where the test pressure is 1.5 times the
MAWP.
DOT Packaging Exceptions (49 CFR 173.xxx) : None
DOT Quantity Limitations Passenger aircraft/rail
(49 CFR 173.27)
: 0.5 L
DOT Quantity Limitations Cargo aircraft only (49
CFR 175.75)
: 2.5 L
DOT Vessel Stowage Location : A - The material may be stowed on deck or under deck on a cargo vessel and on a
passenger vessel.
DOT Vessel Stowage Other : 52 - Stow separated from acids
Emergency Response Guide (ERG) Number : 153
Other information : No supplementary information available.
Transportation of Dangerous Goods
Not applicable
Transport by sea
Transport document description (IMDG) : UN 2735 POLYAMINES, LIQUID, CORROSIVE, N.O .S. (isophorone diamine ; 1,3-
bis(aminomethyl)cyclohexane), 8, I
UN-No. (IMDG) : 2735
Proper Shipping Name (IMDG) : POLYAMINES, LIQUID, CORROSIVE, N.O.S .
Class (IMDG) : 8 - Corrosive substances
Packing group (IMDG) : I - substances presenting high danger
Epoxy Clear Standard Hardener
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
05/15/2023 EN (English US) SDS ID: 80LS-20B 10/11
Marine pollutant : Yes
Air transport
Transport document description (IATA) : UN 2735 Polyamines, liquid, corrosive, n.o.s. (isophorone diamine ; 1,3-
bis(aminomethyl)cyclohexane), 8, I
UN-No. (IATA) : 2735
Proper Shipping Name (IATA) : Polyamines, liquid, corrosive, n.o.s.
Class (IATA) : 8 - Corrosives
Packing group (IATA) : I - Great Danger
SECTION 15: Regulatory information
15.1. US Federal regulations
Epoxy Clear Standard Hardener (Mixture)
SARA Section 311/312 Hazard Classes Delayed (chronic) health hazard
1,3-bis(aminomethyl)cyclohexane (2579-20-6)
Listed on the United States TSCA (Toxic Substances Control Act) inventory
4-tert-butylphenol (98-54-4)
Listed on the United States TSCA (Toxic Substances Control Act) inventory
isophorone diamine (2855-13-2)
Listed on the United States TSCA (Toxic Substances Control Act) inventory
benzyl alcohol (100-51-6)
Listed on the United States TSCA (Toxic Substances Control Act) inventory
m-phenylenebis(methylamine) (1477-55-0)
Listed on the United States TSCA (Toxic Substances Control Act) inventory
15.2. International regulations
CANADA
1,3-bis(aminomethyl)cyclohexane (2579-20-6)
Listed on the Canadian DSL (Domestic Substances List)
4-tert-butylphenol (98-54-4)
Listed on the Canadian DSL (Domestic Substances List)
isophorone diamine (2855-13-2)
Listed on the Canadian DSL (Domestic Substances List)
benzyl alcohol (100-51-6)
Listed on the Canadian DSL (Domestic Substances List)
m-phenylenebis(methylamine) (1477-55-0)
Listed on the Canadian DSL (Domestic Substances List)
EU-Regulations
No additional information available
National regulations
No additional information available
15.3. US State regulations
Epoxy Clear Standard Hardener
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
05/15/2023 EN (English US) SDS ID: 80LS-20B 11/11
Component State or local regulations
isophorone diamine(2855-13-2) U.S. - New Jersey - Right to Know Hazardous Substance List
m-phenylenebis(methylamine)(1477-55-0) U.S. - New Jersey - Right to Know Hazardous Substance List
SECTION 16: Other information
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
Revision date : 05/15/2023
Other information : None.
Full text of H-phrases:
H302 Harmful if swallowed
H312 Harmful in contact with skin
H314 Causes severe skin burns and eye damage
H315 Causes skin irritation
H317 May cause an allergic skin reaction
H318 Causes serious eye damage
H331 Toxic if inhaled
H332 Harmful if inhaled
H401 Toxic to aquatic life
H402 Harmful to aquatic life
H410 Very toxic to aquatic life with long lasting effects
H411 Toxic to aquatic life with long lasting effects
H412 Harmful to aquatic life with long lasting effects
SDS US (GHS HazCom 2012)
To the best of our knowledge this SDS is accurate. The the extent allowed by law, this statement is made in lieu of an other warranties, expressed or implied including but not limited to any implied
warranty of merchantability or fitness for a particular purpose and is in lieu of any other obligations or liability on the part of Dura Technoligies, Inc.