TECHNICAL DATA SHEET
TCC-410
February 19, Version 01 /2021
1
TECHNICAL DATA SHEET
TCC-410
February 19, Version 01 /2021
1
TECHNICAL DATA SHEET
TCC-410
SURFACE/MASS CASTING SYSTEM
IMPACT RESISTANT
DESCRIPTION
Epoxy Resin TCC-410 is an aluminum filled system designed for high-impact resistance. This system can be surface
cast to metal or other low-cost cores or it may be mass casted. Depending on thickness of cast, a choice of hardeners
is provided to control exothermic heat and shrinkage. Applications for this system include casting surfaces on
prototype stamping dies or mass casting applications where high-impact resistance is desired.
APPLICATIONS
Casting surfaces on prototype stamping dies
Mass casting applications
TECHNICAL DATA SHEET
TCC-410
February 19, Version 01 /2021
2
PHYSICAL PROPERTIES
Thickness of Cast > Surface Cast – 1 Mass Cast 1 – 4 Mass Cast 4 – 10
Hardener Selection TCC-104 TCC-104-5 TCC-105
Mix Ratio (parts by weight):
Resin TCC-410 100 parts 100 parts 100 parts
Hardener 10 parts 10 parts 10 parts
Pot Life (500 gram mass) 60 minutes 100 minutes 2 – 3 hours
Peak Exotherm 200 F (93 C)
Peak Operating Temperature 180 F (82 C) 210 F (99 C) 240 F (116 C)
Cure Time 8 – 12 hours 18- 36 hours 48 – 72 hours
TYPICAL PHYSICAL PROPERTIES with TCC-104 H @ 77 F (25 C) Cured 7 days @ R.T.
Specific Gravity (g/cc) 1.65
Mixed Viscosity – (cps & mPa.s)_ 6,000
Cured Color – Visual Aluminum – Gray
Hardness – (Shore D) 84
Linear Shrinkage (in/in) 0.0015
Notched Izod Impact Strength – (ft lbs/in) 8.5
Tensile Strength – psi (MPa) 7,000 (48)
Shelf Life (in original unopened containers) TCC-401/TCC-104, TCC-104-5, or TCC-105
2
years
HANDLING PRECAUTIONS
Normal health and safety precautions should be observed when handling these products:
Ensure good ventilation.
Wear gloves, glasses and protective clothes.
For further information, please consult the Safety Data Sheets.
STORAGE CONDITIONS
This product has a shelf life of 24 months for the resin and hardener as indicated by the
expiration date on the container when stored in original unopened containers.
PACKAGING
Packaging information on request, please contact your local sales representative or find your
local contact on www.sikaadvancedresins.us
LEGAL NOTICE
The information, and, in particular, the recommendations relating to the application and
end-use of Sika products, are given in good faith based on Sika s current knowledge and
experience of the products when properly stored, handled and applied under normal
conditions in accordance with Sika s recommendations. In practice, the differences in
materials, substrates and actual site conditions are such that no warranty in respect of
merchantability or of fitness for a particular purpose, nor any liability arising out of any legal
relationship whatsoever, can be inferred either from this information, or from any written
recommendations, or from any other advice offered. The user of the
TECHNICAL DATA SHEET
TCC-410
February 19, Version 01 /2021
3
product must test the product s suitability for the intended application and purpose. Sika
reserves the right to change the properties of its products. The proprietary rights of third
parties must be observed. All orders are accepted subject to our current terms of sale and
delivery. Users must always refer to the most recent issue of the local Product Data Sheet
for the product concerned, copies of which will be supplied on request.
CONTACT
UNITED STATES
Sika Corporation
30800 Stephenson Highway
Madison Heights, Michigan 48071 USA
Tel.: (+1) 248 588-2270
Fax: (+1) 248 577-0810
E-mail: advanced.resins@us.sika.com
Website: www.sikaadvancedresins.us