TECHNICAL DATA SHEET
SikaBiresin AP017 RR
February 19, Version 02 /2019
1
TECHNICAL DATA SHEET
SikaBiresin AP017 RR
(FORMERLY P-17 RR)
POLYESTER RESIN
REDUCER RESIN FOR P-17
DESCRIPTION
The SikaBiresin AP017 RR REDUCER RESIN is a polyester resin system with heat resistance of 446 F (230 C) developed to reduce
the viscosity of SikaBiresin AP017 (Formerly P-17) High Heat Resistant Filler Paste. SikaBiresin AP017 RR Reducer Resin can be
added to SikaBiresin AP017 Filler in varying amounts to “customize” the SikaBiresin AP017 Filler anywhere from a thin runny
paste to a sprayable consistency without altering the physical properties or the quick set work life. It is recommended to
experiment with 5% by weight addition or less to stay closer to the SikaBiresin AP017 Filler cured properties. The
SikaBiresin AP017 RR also performs very well in applications requiring a quick setting, high temperature polyester laminating resin.
PROPERTIES
High service temperature
Styrene-free
Exceptional adhesion
Impact and chemical resistant
TECHNICAL DATA SHEET
SikaBiresin AP017 RR
February 19, Version 02 /2019
2
PHYSICAL PROPERTIES
Composition POLYESTER
SikaBiresin AP017RR
BPO HARDENER MIXED
Mix ratio by weight
Mix ratio by volume at 25 C
100 2
Aspect Liquid Cream Paste Liquid
Viscosity (cps) 1,000
Color NOTE – Mixed color can be
varied with Cream BPO color
Clear Amber White
Red
Black
Specific gravity at 25 C lbs./gal
(g/cc)
ASTM D792 9.07
(1.09)
Pot Life at 25 C (102 g) (minutes) ASTM D2471 11
NOTE – SikaBiresin AP017 RR Can be used alone to thin P-17 or with 2% BPO cream hardener for laminating applications. BPO
cream hardener is not sold with the P-17 Reducer Resin.
TECHNICAL DATA SHEET
SikaBiresin AP017 RR
February 19, Version 02 /2019
3
PROCESSING
PROCESSING CONDITIONS
Thoroughly blend 100 parts resin with 2 parts hardener by weight for 1 to 1 minutes in clean
dry container
HANDLING PRECAUTIONS
Normal health and safety precautions should be observed when handling these products:
Ensure good ventilation.
Wear gloves, glasses and protective clothes.
For further information, please consult the Safety Data Sheets.
STORAGE CONDITIONS
Product shelf life of polyester resin is 12 months when stored in original unopened containers
between 65 77 F (15 25 C). Any opened can must be tightly closed. Product shelf life of BPO
hardener is 18 months when stored in original unopened containers between 65 77 F (15 25 C).
Any opened can must be tightly closed.
PACKAGING
Packaging information on request, please contact your local sales representative or find your local
contact on www.sikaadvancedresins.us
TECHNICAL DATA SHEET
SikaBiresin AP017 RR
February 19, Version 02 /2019
4
LEGAL NOTICE
The information, and, in particular, the recommendations relating to the application and end-use of
Sika products, are given in good faith based on Sika s current knowledge and experience of the products
when properly stored, handled and applied under normal conditions in accordance with Sika s
recommendations. In practice, the differences in materials, substrates and actual site conditions are
such that no warranty in respect of merchantability or of fitness for a particular purpose, nor any liability
arising out of any legal relationship whatsoever, can be inferred either from this information, or from
any written recommendations, or from any other advice offered. The user of the product must test the
product s suitability for the intended application and purpose. Sika reserves the right to change the
properties of its products. The proprietary rights of third parties must be observed. All orders are
accepted subject to our current terms of sale and delivery. Users must always refer to the most recent
issue of the local Product Data Sheet for the product concerned, copies of which will be supplied on
request.
CONTACT ADVANCED RESINS
GERMANY
Stuttgarter Stra e 139
72574 Bad Urach GERMANY
Tel.: (+49) 7 125 940 492
Fax. : (+49) 7 125 940 401
E-mail : tooling@de.sika.com
Website : www.sikaadvancedresins.de
FRANCE
ZI des B thunes – 15, Rue de l Equerre
95310 Saint-Ouen-l Aum ne
CS 40444
95005 CERGY PONTOISE Cedex FRANCE
Tel.: (+33) 1 344 034 60
Fax: (+33) 1 342 197 87
E-mail: advanced.resins@fr.sika.com
Website : www.sikaadvancedresins.fr
SPAIN
Pol gon Industrial Congost – Guardaagulles, 8
08520 LES FRANQUESES DEL VALLES SPAIN
Tel.: (+34) 932 25 16 20
E-mail: spain@axson.com
Website: www.sikaadvancedresins.es
ITALY
Via Morandi 15
21047 Saronno (Va) ITALY
Tel.: (+39) 02 9670 2336
Fax: (+39) 02 9670 2369
E-mail: axson@axson.it
Website: www.sikaadvancedresins.it
UNITED KINGDOM
Unit 15 Studlands Park Ind. Estate
Newmarket Suffolk, CB8 7AU UNITED KINGDOM
Tel.: (+44) 1638 660 062
Fax: (+44) 1638 665 078
E-mail: sales.uk@axson.com
Website: www.sikaadvancedresins.uk
SLOVAKIA
Tovarenska 49
95301 ZLATE MORAVCE SLOVAKIA
Tel: (+421) 376 422 526
Fax: (+421) 376 422 527
E-mail: axson.sk@axson.com
Web site: www.sikaadvancedresins.sk
UNITED STATES
30800 Stephenson Highway
Madison Heights, Michigan 48071 USA
Tel.: (+1) 248 588-2270
Fax: (+1) 248 577-0810
E-mail: axsonmh@axson.com
Web site: www.sikaadvancedresins.us
MEXICO
Ignacio Ram rez #20
Despacho 202 Col. Tabacalera
C.P. 06030 CDMX MEXICO
Tel.: (+52) 55 5264 4922
Fax: (+52) 55 5264 4916
E-mail: marketing@axson.com.mx
Website: www.sikaadvancedresins.mx
CHINA
N 53 Tai Gu Road
Wai Gao Qiao
Free Trade Zone, Pudong
200131 Shanghai CHINA
T l.: (+86) 21 5868 3037
Fax: (+86) 21 5868 2601
E-mail: marketing.china@axson.com
Website: www.sikaadvancedresins .cn
JAPAN
2-5-12 Onishi Okazaki Aichi
444-0871 JAPAN
Tel.: (+81) 564 26 2591
Fax: (+81) 564 26 2593
E-mail: sales.japan@axson.com
Website: www.sikaadvancedresins.jp
INDIA
Office n 8, Building Symphony C – 3rd Floor
Range Hills Road
Bhosale Nagar
PUNE 411 020 INDIA
Tel: (+ 91) 20 25 56 07 10
Fax: (+ 91) 20 25 56 07 12
E-mail: info.india@axson.com
Website: www.sikaadvancedresins.in