by | Sep 27, 2025
SAFETY DATA SHEET
1. CHEMICAL PRODUCTANDCOMPANYIDENTIFICATION
PRODUCT IDENTIFIER: WEST SYSTEM@ 105 Epoxy Resin
APPLICABLE PRODUGT CODES: ……………….105, 105-A, 105-8, 105-C, 105-E, C 105-A, C 105-8, C 105-C, C 105-E
CHEMICAL FAMILY:………. …….Epoxy resin mixture.
INTENDED PRODUCT USES:……………………… Resin for coatings or adhesives.
PRODUCT USE RESTRICTIONS: None identified
1 05-201 9aSDS VERSION:
EMERGENCY TELEPHONE NUMBERS (24 HRS):
Transportation
CHEMTREC:…
Nontransportation
Poison Hotline: …………….. 800-222-1 222
MANUFACTURER:
Gougeon Brothers, lnc.
1 00 Patterson Ave.
Bay City, Ml 48706, U.S.A.
Phone: 866-937 -8797 or 989-684-7280
www.westsystem.com
800424-9300 (U.S.)
7 03-527 -3887 (l nte m ational)
2. HAZARDSIDENTIFICAT]ON
Glassification of Substance or Mixture
Skin corrosion/irritation, Category 2
Skin sensitizer, Category 1
Eye damage/irritation, Category 2A
Chronic aquatic toxicity, Category 2
Label Elements
Hazard Pictogram(s):
Signal Word
WARNING
Hazard Statements
H315 Causes skin irritation.
H317 May cause an allergic skin reaction.
H319 Causes serious eye irritation.
H411 Toxic to aquatic life with long lasting effects.
Precautionary Statements
Prevention
P261 Avoid breathing dusVfume/gas/misVvapors/spray.
P264 Wash hands thoroughly after handling.
P272 Contaminated work clothing should not be allowed out of the workplace.
P273 Avoid release to the environment.
P 280 Wear protective gloves/protective clothing/eye protection.
Response
P302 + P352 lF ON SKIN: Wash with plenty of soap and water.
p305 + p351 + P338 lF lN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do.
Continue rinsing.
P333 + P313 lf skin irritation or rash occurs: Get medical attentioniadvice.
P337 + P3’13 lf eye irritation persists: Get medical attention/advice.
P362 + P364 Take off contaminated clothing and wash it before re-use.
P391 Collect spillage.
Disposal
P501 Dispose of contents/container in accordance with local, regional and international regulations.
Other Hazards Not Resultinq ln Classification
None known.
I
3. COMPOSITION/INFORMATION ON HAZARDOUS INGREDIENTS
lNGREDIENT NAME cAs # coNcENTRATTON (%)
Propane, 2,2-bis[p-(2,3-epoxypropoxy)phenyl]-, polymers 25085-99-8 60-80
Benzyl alcohol 100-51-6 10-30
Last Revised: l5JAN19
WEST SYSTEM@ IO5 Resin
Phenol-formaldehyde polymer glycidyl ether 24064-144 5-1 0
The exact chemical identity and/or exact percentage (concentration) of each ingredient may be held as confidential business information
(CBl). Any ingredient not disclosed in this section may have been determined not to be hazardous to health or the environment, or it may
be present at a level below its disclosure threshold.
FIRST AID FOR EYES……. SYMPTOMS: Causes serious irritation and redness. RESPONSE: Flush
immediately with water for at least 15 minutes. Remove contact lenses if present and easy to do. Consult a physician as precautionary measure
FIRST AID FOR SKIN. SYMPTOMS: Causes skin irritation. May cause allergic skin reaction and
sensitization. RESPONSE: Remove contaminated clothing. Wipe excess from skin. Apply waterless skin cleaner and then wash with soap and
water. Consult a physician if effects occur.
FIRST AID FOR INHALATION… SYMPTOMS: Not a likely route of exposure under normal conditions of use
RESPONSE: Remove to fresh air if respiratory irritation occurs and keep comfortable for breathing
FIRST AID FOR INGESTION SYMPTOMS: No acute adverse health effects expected from amounts
ingested under normal conditions of use. RESPONSE: Seek medical attention if a significant amount is ingested.
4. FIRST AID MEASURES
5. FIRE FIGHTING MEASURES
EXTINGUISHING MEDIA:
Direct water stream.
FIRE AND EXPLOSION HAZARDS:
SUITABLE: Foam, carbon dioxide (COz), dry chemlcal. NON-SUITABLE:
During a fire, smoke may contain theoriginal
include,
materials in addition to
but are not limited to:combustion products of varying composition which may be toxic andior irritating. Combustion products may
phenolics, carbon monoxide, and carbon dioxide.
SPECIAL FIRE FIGHTING PROCEDURES Wear a self-contained breathing apparatus and complete full-body personal
protective equipment. Closed containers may rupture (due to buildup of pressure) when exposed to extreme heat.
6. ACCIDENTALRELEASEMEASURES
EMERGENCY PROGEDURES: Keep unnecessary and unprotected personnel from entering area. Use
appropriate safety and personal protective equipment as indicated in Section B.
MITIGATION AND CLEAN UP PROCEDURES Stop leak without additional risk. lsolate area. Dike and absorb with inert
material (e.9., sand) and collect in a suitable, closed container. Warm, soapy water or non-flammable, safe solvent may be used to clean residual
ENVIRONMENTAL PRECAUTIONS:………………… ….. Prevent from entering into soil, ditches, sewers, waterways and
groundwater. See Section 12 for environmental impact information.
7. HANDL]NGANDSTORAGE
STORAGE TEMPERATURE (min./max.): ………………40’F (4″C) / 120’F (49’C)
moisture absorption uno ror” oi uoi”il;. ;;;;;; t'””i ou”r long periods of time will degrade the resin.
HANDLING PRECAUTIONS: …………………. …………… Avoid all skin and eye contact. Wash thoroughly after handling. Launder
contaminated clothing before reuse. Avoid inhalation of vapors from heated product. Precautionary steps should be taken when curing product in
large quantities. When mixed with epoxy curing agents this product causes an exothermic, which in large masses, can produce enough heat to
damage or ignite surrounding materials and emit fumes and vapors that vary widely in composition and toxicity.
ENGINEERING CONTROLS:…….
exposures below established limits.
… Use with adequate general ventilation and/or local ventilation to keep
EYE PROTECTION GUIDELINES:
SKIN PROTECTION GUIDELINES
Safety glasses with side shields or chemical splash goggles.
Wear liquid-proof, chemical resistant gloves (nitrile-butyl rubber, neoprene,
butyl rubber or natural rubber) and full body-covering clothing
RESPIRATORY PROTECTION GUIDELINES When ventilation cannot be made adequate enough to keep exposures
below established limits, use a NIOSH approved respirator with an organic vapor cartridge, or organic vapor cartridge + P100 particulate filter,
depending on specific workplace conditions. Consult with your respirator and cartridge supplier to ensure proper selection of respirator and
cartridge based on ingredients listed in Section 3 and specific workplace conditions. Use and select a respirator according the guidelines
established in OSHA 19’10.134 or other applicable respiratory protection standard.
8. EXPOSURECONTROLS/PERSONALPROTECTION
Page 2 of 6 Last Revised: l5JANI9
WEST SYSTEM@ 105 Resin
ADDITIONAL PROTECTIVE MEASURES:… Practice good caution and personal cleanliness to avoid skin and eye
contact. Avoid skin contact when removing gloves and other protective equipment. Wash thoroughly after handling. Generally speaking, working
cleanly and following basic precautionary measures will greatly minimize the potential for harmful exposure to this product under normal use
conditions.
OCCUPATIONAL EXPOSURE LIMITS: Exposure limits may not be established for this product as a whole. For
established exposure limits of specific ingredients in this product, or other available exposure limit information, refer to the table below.
lnqredient Name GAS# Exoosure Limit lnformation
Propane, 2,2-bis[p-(2,3-epoxypropoxy)phenyl]-, polymers
25085-99-8 No data available
Benzvl alcohol 1 00-51-6 10 ppm (AIHA-WEEL)
Phenol-formaldehvde oolvmer olvcidvl ether 28064-144 No data available
9. PHYSICAL AND CHEMICAL PROPERTIES
PHYSICAL FORM Viscous liquid.
Colorless.
Mitd.
No data available
No data available
No data available
> 400’F (204’C).
>200’F (93″C). Estimated based on ingredient data.
No data available
No data available
No data available
No data available
No data available
1.15
9.6 lb./gal. (1.15 kg/L)
Heavier than air. Estimated based on ingredient data.
GOLOR:
ODOR THRESHOLD:
pH..
MELTING POINT / FREEZING POINT………….
BOILING POINT (760mm/Hg):
FLASH POINT:
FLAMMABILITY (solids or gasses)………..
AUTO tGNITION TEMPER4TURE……………….
LOWER EXPLOSTVE L|MIT (LEL)…..
UPPER EXPLOSTVE LrMrT (UEL)
VAPOR PRESSURE…..
SPECIFIC GRAVITY/DENSITY (water
=
1)…………………
BULK DENSIW
VAPOR DENSITY (air
= 1)
EVAPORATIOIN RATE (Butyl Acetate = 1)….. No data available
WATER SOLUBTLTTY (% BYWT.) No data available
PARTITION COEFFICIENT, n-OCTANOLMATER (log Pow)………… No data available
K|NEMAT|C VISGOS|TY: 869.5 mmz/s@ 20″C
DECOMPOSITION TEMPERATURE: …………. ………… No data available.
% VOLATILE BY WEIGHT: ASTM D 2369-07 was used to determine the Volatile Content of mixed
epoxy resin and hardener. Refer to the hardener SDS for information about the total volatile content of the resinihardener system.
,tO.
STABILITYAND REACTIVITY
STABILITY Product is stable at normal temperatures and pressures.
REACTIVITY/HAZARDOUS REACTIONS Product will not react by itsetf. A mass of more than one pound of product
mixed with an aliphatic amine will cause irreversible polymerization with significant heat buildup. Strong acids, bases, amines and mercaptans can
cause polymerization.
External heating or self-heating could result in rapid temperature increase and pressure build up. lf such a condition were to occur in a drum, the
drum could expand and rupture violently.
CONDITIONS TO AVOID:
DECOMPOSITION PRODUCTS
uncontrolled exothermic reactions or when otherwise heated to decomposition.
Avoid excessive heat.
Carbon monoxide, carbon dioxide and phenolics may be produced during
11. TOXICOLOGICAL AND HAZARD ENDPOINT INFORMATION
Component Name cAs# LDrn Oral LDco Dermal LGco lnhalation
Propane, 2,2-bisIp-(2,3-epoxypropoxy)phenyl]-,
oolvmers 25085-99-8
>15,000 mg/kg
(rat)
>23,000 mg/kg
(rabbit)
No data
Benzvl alcohol 100-51-6 1620 mo/ko No data
>4.18 mg/l
4 h aerosol
Phenol-formaldehyde polymer glycidyl ether 28064-144 >2,000 mg/kg
(rat)
2,000 mg/kg
(rat)
No data
ACUTE TOXICITY: ….. No specifc toxicity data exists for this mixture. Classification is
based on acute toxicity estimation methods using ingredient data.
Oral:
Dermal
heated, vapors generated can cause headache, nausea, dizziness and possible respiratory initation if inhaled in high concentrations.
lnhalation:……..
Not classified. Does not meet acute oral toxicity criteria.
Not classified. Does not meet acute dermal toxicity criteria.
Not classified. Does not meet acute inhalation toxicity criteria. lf product is
Page 3 of6 Last Revised: l5JANl9
WEST SYSTEM@ 105 Resin
SKIN CORROSION / IRRITATION:-…………….. ……….. Causes skin irritation – Category 2.
SERIOUS EYE DAMAGE / IRRITATION:. Causes serious eye irritation. Category 2A.
RESPIRATORY SENSITIZATION:………………… ……… Not classified. Does not meet criteria for respiratory sensitizer
Repeated exposure to high vapor concentrations may cause irrltation of pre-existing lung allergies and increase the chance of
developing allergy symptoms to this product.
SKIN SENSITIZATION:…………… …….. May cause allergic skin reaction. Category 1.
REPRODUCTIVE TOXICITY:…. Not classified. Diglycidyl ether bisphenol-A, in animal studies, has been
shown not to interfere with reproduction. Diglycidyl ether bisphenol-A did not cause birth defects or other adverse effects on the fetus when
pregnant rabbits were exposed by skin contact, the most likely route of exposure, or when pregnant rats or rabbits were exposed orally.
MUTAGENICITY: Not classified. Diglycidyl ether bisphenol-A in animal mutagenicity studies
were negative. ln vitro mutagenicity tests were negative in some cases and positive in others.
equal to 0.’l% is identified as a carcinogen or potential carcinogen by OSHA, NTP or IARC.
Many studies have been conducted to assess the potential carcinogenicity of diglycidyl ether of bisphenol-A. Although some weak evidence of
carcinogenicity has been reported in animals, when all of the data are considered, the weight of evidence does not show that Diglycidyl ether
bisphenol-A is carcinogenic. lndeed, the most recent review of the available data by the lnternational Agency for Research on Cancer (IARC) has
concluded that Diglycidyl ether bisphenol-A is not classified as a carcinogen.
Epichlorohydrin, an impurity in this product (<5 ppm) has been reported to produce cancer in laboratory animals and to produce mutagenic
changes in bacteria and cultured human cells. lt has been established by the lnternational Agency for Research on Cancer (IARC) as a probable
human carcinogen (Group 2A) based on the following conclusions: human evidence -
inadequate; animal evidence -
sufficient. lt has been
classified as an anticipated human carcinogen by the National Toxicology Program (NTP). Note: lt is unlikely that normal use of this product
would result in measurable exposure concentrations to this substance.
STOT (Single Exposure): Not classified. Does not meet STOT SE criteria.
STOT (Repeated Exposure): Not classified. Does not meet STOT RE criteria.
ASPIRATION HAZARD: Not classified. Does not meet aspiration toxicity criteria.
OTHER HEALTH HAZARD INFORMATION None known.
12. ECOLOGICALINFORMATION
ACUTE AQUATIC TOXIGITY:....... ...... No specific test data available for the mixture. Calculated
Estimate: Not classified. Does not meet acute aquatic classification criteria.
CHRONIC AQUATIC TOXIGITY: ........ No speciflc test data available for the mixture. Calculated
Estimate: Aquatic Chronic Category 2.
PERSISTANCE AND BIODEGRADABILITY: No specific test data available for the mixture
MOBILITY IN SOIL: No specific test data available for the mixture
ADDITIONAL ECOTOXICITY INFORMATION:................................... ln the liquid, uncured state, this product may be harmful to
aquatic life long lasting effects. Prevent release to the environment, sewers and natural waters.
lnqredient cAs# EcotoxiciW Glassifi cation lnformation
Propane, 2,2-bis[p-(2,3-epoxypropoxy)phenyl]-, polymers
25085-99-8
Aquatic Chronic Cat. 2
Benzvl alcohol 1 00-51-6 Not Classified
Phenol-formaldehvde oolvmer qlvcidvl ether 28064-144 Aquatic Chronic Cat. 2
13. DISPOSALCONSIDERATIONS
WASTE DISPOSAL METHOD:........ ... Evaluation of this product using RCRA criteria shows that it is not a
hazardouswaste,eitherbylistingorcharacteristics,initspurchasedform. ltistheresponsibilityoftheusertodetermineproperdisposal
methods.
lncinerate, recycle (fuel blending) or reclaim may be preferred methods when conducted in accordance with federal, state and local regulations.
US DOT
U.N./N.A. NUMBER:........ Not regulated
14. TRANSPORTATION INFORMATION
Page 4 of 6 Last Revised: 15JANI9
WEST SYSTEM@ 105 Resin
TECHNICAL SHIPPING NAME
HAZARD CLASS
PACKING GROUP:
CANADA TDG
U.N./N.A. NUMBER:........ Not regulated.
SHIPPING NAME:............. Not applicable.
TECHNICAL SHIPPING NAME Not applicable.
HAZARD CLASS:............ Not applicable.
PACKING GROUP:.......... Not applicable.
IMDG
U.N. NUMBER: ........... UN3082.
SHIPPING NAME:............. Environmentally hazardous substance, liquid, n.o.s.
TECHNICAL SHIPPING NAME: ............. Epoxy Resin.
PACKING GROUP:
Class 9.
PG lll.
F-A, S-F
Yes
EmS Number:
IGAO/IATA
U.N. NUMBER:
MARINE POLLUTANT...
Not applicable.
Not applicable.
Not applicable.
Not applicable.
uN3082.
Environmentally hazardous substance, liquid, n.o.s.
Epoxy Resin.
Class 9.
PG ilt.
Yes
TECHNICAL SHIPPING NAME
SHIPPING NAME:.
HAZARD CLASS:...
PACKING GROUP:
MARINE POLLUTANT:
15. REGULATORY INFORMATION
COUNTRY INVENTORY LIST STATUS
United States TSCA All inqredients are listed or otherwise compliant.
Europe EINECS or ELINCS All inoredients are listed or otherwise comoliant.
Canada CEPA (DSUNDSL) All inqredients are listed or otherwise compliant.
Australia Alcs All inqredients are listed or otherwise comoliant.
Jaoan ENCS All inqredients are listed or otherwise compliant.
South Korea KECI All inoredients are listed or otherwise comoliant.
China IECSC All inqredients are listed or otherwise compliant.
PhilioDines Ptccs All inoredients are listed or otherwise comoliant.
US EPA TSCA Requirements: ........... No data avallable.
Ganada WHMIS Gonfidential Business lnformation (CBl):.............. No data available.
US EPA SARA TITLE lll Reporting and Notification Requirements
to Section 302
to Section 304
to Section 311
to Section 313
No data available.
No data available.
Refer to the health and physical classifications in section 2
No data available.
STATE CODE
1cA
or2
STATE REGULATORY INFORMATION :
Chemicals listed below may be specifically regulated by individual states. For details on state regulatory requirements you should contact the
appropriate state agency.
COMPONENT NAME
/GAS NUMBER
Epichlorohydrin
106-89-8 < 5ppm
1'
These substances are known to the state of California to cause cancer or reproductive harm, or both.
16. OTHER INFORMATION
PREPARED BY:
SDS CONTAGT:
REASON FOR ISSUE:. Updates to sections 3, 8, 11 & 15.
Gougeon Brothers, lnc.
safety@gougeon.com
Health, Safety & Environmental Manager
January 15,2019
August 15, 2016
APPROVAL DATE:
SUPERSEDES DATE:
TITLE
Page 5 of6 Last Revised: 15JAN19
WEST SYSTEM@ 105 Resin
PERSONAL PROTECTION:
SDS VERSION: 105-2019a
OTHER HAZ,ARD INFORMATION AND RATING SYSTEMS:
HMIS@ RATING NFPA@ 704 CODES
Approximate HMIS and NFPA Rr'sk Rallngs Legend:
0 = LoworNone; 1 =Slight; 2 =Moderate; 3 = Serious; 4 = Severe
lnformation in this document is furnished without warranty, expressed or implied, except that it is accurate to the best knowledge of Gougeon Brothers,
lnc. The data on this sheet is related only to the specific material designated herein. Gougeon Brothers, lnc. assumes no legal responsibility for use or
reliance upon these data.
Page 6 of6 Last Revised: l5JAN19
by | Sep 27, 2025
SAFETY DATA SHEET
1. CHEMICAL PRODUCTANDCOMPANYIDENTIFICATION
PRODUCT IDENTIFIER: WEST SYSTEM@ 105 Epoxy Resin
APPLICABLE PRODUGT CODES: ……………….105, 105-A, 105-8, 105-C, 105-E, C 105-A, C 105-8, C 105-C, C 105-E
CHEMICAL FAMILY:………. …….Epoxy resin mixture.
INTENDED PRODUCT USES:……………………… Resin for coatings or adhesives.
PRODUCT USE RESTRICTIONS: None identified
1 05-201 9aSDS VERSION:
EMERGENCY TELEPHONE NUMBERS (24 HRS):
Transportation
CHEMTREC:…
Nontransportation
Poison Hotline: …………….. 800-222-1 222
MANUFACTURER:
Gougeon Brothers, lnc.
1 00 Patterson Ave.
Bay City, Ml 48706, U.S.A.
Phone: 866-937 -8797 or 989-684-7280
www.westsystem.com
800424-9300 (U.S.)
7 03-527 -3887 (l nte m ational)
2. HAZARDSIDENTIFICAT]ON
Glassification of Substance or Mixture
Skin corrosion/irritation, Category 2
Skin sensitizer, Category 1
Eye damage/irritation, Category 2A
Chronic aquatic toxicity, Category 2
Label Elements
Hazard Pictogram(s):
Signal Word
WARNING
Hazard Statements
H315 Causes skin irritation.
H317 May cause an allergic skin reaction.
H319 Causes serious eye irritation.
H411 Toxic to aquatic life with long lasting effects.
Precautionary Statements
Prevention
P261 Avoid breathing dusVfume/gas/misVvapors/spray.
P264 Wash hands thoroughly after handling.
P272 Contaminated work clothing should not be allowed out of the workplace.
P273 Avoid release to the environment.
P 280 Wear protective gloves/protective clothing/eye protection.
Response
P302 + P352 lF ON SKIN: Wash with plenty of soap and water.
p305 + p351 + P338 lF lN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do.
Continue rinsing.
P333 + P313 lf skin irritation or rash occurs: Get medical attentioniadvice.
P337 + P3’13 lf eye irritation persists: Get medical attention/advice.
P362 + P364 Take off contaminated clothing and wash it before re-use.
P391 Collect spillage.
Disposal
P501 Dispose of contents/container in accordance with local, regional and international regulations.
Other Hazards Not Resultinq ln Classification
None known.
I
3. COMPOSITION/INFORMATION ON HAZARDOUS INGREDIENTS
lNGREDIENT NAME cAs # coNcENTRATTON (%)
Propane, 2,2-bis[p-(2,3-epoxypropoxy)phenyl]-, polymers 25085-99-8 60-80
Benzyl alcohol 100-51-6 10-30
Last Revised: l5JAN19
WEST SYSTEM@ IO5 Resin
Phenol-formaldehyde polymer glycidyl ether 24064-144 5-1 0
The exact chemical identity and/or exact percentage (concentration) of each ingredient may be held as confidential business information
(CBl). Any ingredient not disclosed in this section may have been determined not to be hazardous to health or the environment, or it may
be present at a level below its disclosure threshold.
FIRST AID FOR EYES……. SYMPTOMS: Causes serious irritation and redness. RESPONSE: Flush
immediately with water for at least 15 minutes. Remove contact lenses if present and easy to do. Consult a physician as precautionary measure
FIRST AID FOR SKIN. SYMPTOMS: Causes skin irritation. May cause allergic skin reaction and
sensitization. RESPONSE: Remove contaminated clothing. Wipe excess from skin. Apply waterless skin cleaner and then wash with soap and
water. Consult a physician if effects occur.
FIRST AID FOR INHALATION… SYMPTOMS: Not a likely route of exposure under normal conditions of use
RESPONSE: Remove to fresh air if respiratory irritation occurs and keep comfortable for breathing
FIRST AID FOR INGESTION SYMPTOMS: No acute adverse health effects expected from amounts
ingested under normal conditions of use. RESPONSE: Seek medical attention if a significant amount is ingested.
4. FIRST AID MEASURES
5. FIRE FIGHTING MEASURES
EXTINGUISHING MEDIA:
Direct water stream.
FIRE AND EXPLOSION HAZARDS:
SUITABLE: Foam, carbon dioxide (COz), dry chemlcal. NON-SUITABLE:
During a fire, smoke may contain theoriginal
include,
materials in addition to
but are not limited to:combustion products of varying composition which may be toxic andior irritating. Combustion products may
phenolics, carbon monoxide, and carbon dioxide.
SPECIAL FIRE FIGHTING PROCEDURES Wear a self-contained breathing apparatus and complete full-body personal
protective equipment. Closed containers may rupture (due to buildup of pressure) when exposed to extreme heat.
6. ACCIDENTALRELEASEMEASURES
EMERGENCY PROGEDURES: Keep unnecessary and unprotected personnel from entering area. Use
appropriate safety and personal protective equipment as indicated in Section B.
MITIGATION AND CLEAN UP PROCEDURES Stop leak without additional risk. lsolate area. Dike and absorb with inert
material (e.9., sand) and collect in a suitable, closed container. Warm, soapy water or non-flammable, safe solvent may be used to clean residual
ENVIRONMENTAL PRECAUTIONS:………………… ….. Prevent from entering into soil, ditches, sewers, waterways and
groundwater. See Section 12 for environmental impact information.
7. HANDL]NGANDSTORAGE
STORAGE TEMPERATURE (min./max.): ………………40’F (4″C) / 120’F (49’C)
moisture absorption uno ror” oi uoi”il;. ;;;;;; t'””i ou”r long periods of time will degrade the resin.
HANDLING PRECAUTIONS: …………………. …………… Avoid all skin and eye contact. Wash thoroughly after handling. Launder
contaminated clothing before reuse. Avoid inhalation of vapors from heated product. Precautionary steps should be taken when curing product in
large quantities. When mixed with epoxy curing agents this product causes an exothermic, which in large masses, can produce enough heat to
damage or ignite surrounding materials and emit fumes and vapors that vary widely in composition and toxicity.
ENGINEERING CONTROLS:…….
exposures below established limits.
… Use with adequate general ventilation and/or local ventilation to keep
EYE PROTECTION GUIDELINES:
SKIN PROTECTION GUIDELINES
Safety glasses with side shields or chemical splash goggles.
Wear liquid-proof, chemical resistant gloves (nitrile-butyl rubber, neoprene,
butyl rubber or natural rubber) and full body-covering clothing
RESPIRATORY PROTECTION GUIDELINES When ventilation cannot be made adequate enough to keep exposures
below established limits, use a NIOSH approved respirator with an organic vapor cartridge, or organic vapor cartridge + P100 particulate filter,
depending on specific workplace conditions. Consult with your respirator and cartridge supplier to ensure proper selection of respirator and
cartridge based on ingredients listed in Section 3 and specific workplace conditions. Use and select a respirator according the guidelines
established in OSHA 19’10.134 or other applicable respiratory protection standard.
8. EXPOSURECONTROLS/PERSONALPROTECTION
Page 2 of 6 Last Revised: l5JANI9
WEST SYSTEM@ 105 Resin
ADDITIONAL PROTECTIVE MEASURES:… Practice good caution and personal cleanliness to avoid skin and eye
contact. Avoid skin contact when removing gloves and other protective equipment. Wash thoroughly after handling. Generally speaking, working
cleanly and following basic precautionary measures will greatly minimize the potential for harmful exposure to this product under normal use
conditions.
OCCUPATIONAL EXPOSURE LIMITS: Exposure limits may not be established for this product as a whole. For
established exposure limits of specific ingredients in this product, or other available exposure limit information, refer to the table below.
lnqredient Name GAS# Exoosure Limit lnformation
Propane, 2,2-bis[p-(2,3-epoxypropoxy)phenyl]-, polymers
25085-99-8 No data available
Benzvl alcohol 1 00-51-6 10 ppm (AIHA-WEEL)
Phenol-formaldehvde oolvmer olvcidvl ether 28064-144 No data available
9. PHYSICAL AND CHEMICAL PROPERTIES
PHYSICAL FORM Viscous liquid.
Colorless.
Mitd.
No data available
No data available
No data available
> 400’F (204’C).
>200’F (93″C). Estimated based on ingredient data.
No data available
No data available
No data available
No data available
No data available
1.15
9.6 lb./gal. (1.15 kg/L)
Heavier than air. Estimated based on ingredient data.
GOLOR:
ODOR THRESHOLD:
pH..
MELTING POINT / FREEZING POINT………….
BOILING POINT (760mm/Hg):
FLASH POINT:
FLAMMABILITY (solids or gasses)………..
AUTO tGNITION TEMPER4TURE……………….
LOWER EXPLOSTVE L|MIT (LEL)…..
UPPER EXPLOSTVE LrMrT (UEL)
VAPOR PRESSURE…..
SPECIFIC GRAVITY/DENSITY (water
=
1)…………………
BULK DENSIW
VAPOR DENSITY (air
= 1)
EVAPORATIOIN RATE (Butyl Acetate = 1)….. No data available
WATER SOLUBTLTTY (% BYWT.) No data available
PARTITION COEFFICIENT, n-OCTANOLMATER (log Pow)………… No data available
K|NEMAT|C VISGOS|TY: 869.5 mmz/s@ 20″C
DECOMPOSITION TEMPERATURE: …………. ………… No data available.
% VOLATILE BY WEIGHT: ASTM D 2369-07 was used to determine the Volatile Content of mixed
epoxy resin and hardener. Refer to the hardener SDS for information about the total volatile content of the resinihardener system.
,tO.
STABILITYAND REACTIVITY
STABILITY Product is stable at normal temperatures and pressures.
REACTIVITY/HAZARDOUS REACTIONS Product will not react by itsetf. A mass of more than one pound of product
mixed with an aliphatic amine will cause irreversible polymerization with significant heat buildup. Strong acids, bases, amines and mercaptans can
cause polymerization.
External heating or self-heating could result in rapid temperature increase and pressure build up. lf such a condition were to occur in a drum, the
drum could expand and rupture violently.
CONDITIONS TO AVOID:
DECOMPOSITION PRODUCTS
uncontrolled exothermic reactions or when otherwise heated to decomposition.
Avoid excessive heat.
Carbon monoxide, carbon dioxide and phenolics may be produced during
11. TOXICOLOGICAL AND HAZARD ENDPOINT INFORMATION
Component Name cAs# LDrn Oral LDco Dermal LGco lnhalation
Propane, 2,2-bisIp-(2,3-epoxypropoxy)phenyl]-,
oolvmers 25085-99-8
>15,000 mg/kg
(rat)
>23,000 mg/kg
(rabbit)
No data
Benzvl alcohol 100-51-6 1620 mo/ko No data
>4.18 mg/l
4 h aerosol
Phenol-formaldehyde polymer glycidyl ether 28064-144 >2,000 mg/kg
(rat)
2,000 mg/kg
(rat)
No data
ACUTE TOXICITY: ….. No specifc toxicity data exists for this mixture. Classification is
based on acute toxicity estimation methods using ingredient data.
Oral:
Dermal
heated, vapors generated can cause headache, nausea, dizziness and possible respiratory initation if inhaled in high concentrations.
lnhalation:……..
Not classified. Does not meet acute oral toxicity criteria.
Not classified. Does not meet acute dermal toxicity criteria.
Not classified. Does not meet acute inhalation toxicity criteria. lf product is
Page 3 of6 Last Revised: l5JANl9
WEST SYSTEM@ 105 Resin
SKIN CORROSION / IRRITATION:-…………….. ……….. Causes skin irritation – Category 2.
SERIOUS EYE DAMAGE / IRRITATION:. Causes serious eye irritation. Category 2A.
RESPIRATORY SENSITIZATION:………………… ……… Not classified. Does not meet criteria for respiratory sensitizer
Repeated exposure to high vapor concentrations may cause irrltation of pre-existing lung allergies and increase the chance of
developing allergy symptoms to this product.
SKIN SENSITIZATION:…………… …….. May cause allergic skin reaction. Category 1.
REPRODUCTIVE TOXICITY:…. Not classified. Diglycidyl ether bisphenol-A, in animal studies, has been
shown not to interfere with reproduction. Diglycidyl ether bisphenol-A did not cause birth defects or other adverse effects on the fetus when
pregnant rabbits were exposed by skin contact, the most likely route of exposure, or when pregnant rats or rabbits were exposed orally.
MUTAGENICITY: Not classified. Diglycidyl ether bisphenol-A in animal mutagenicity studies
were negative. ln vitro mutagenicity tests were negative in some cases and positive in others.
equal to 0.’l% is identified as a carcinogen or potential carcinogen by OSHA, NTP or IARC.
Many studies have been conducted to assess the potential carcinogenicity of diglycidyl ether of bisphenol-A. Although some weak evidence of
carcinogenicity has been reported in animals, when all of the data are considered, the weight of evidence does not show that Diglycidyl ether
bisphenol-A is carcinogenic. lndeed, the most recent review of the available data by the lnternational Agency for Research on Cancer (IARC) has
concluded that Diglycidyl ether bisphenol-A is not classified as a carcinogen.
Epichlorohydrin, an impurity in this product (<5 ppm) has been reported to produce cancer in laboratory animals and to produce mutagenic
changes in bacteria and cultured human cells. lt has been established by the lnternational Agency for Research on Cancer (IARC) as a probable
human carcinogen (Group 2A) based on the following conclusions: human evidence -
inadequate; animal evidence -
sufficient. lt has been
classified as an anticipated human carcinogen by the National Toxicology Program (NTP). Note: lt is unlikely that normal use of this product
would result in measurable exposure concentrations to this substance.
STOT (Single Exposure): Not classified. Does not meet STOT SE criteria.
STOT (Repeated Exposure): Not classified. Does not meet STOT RE criteria.
ASPIRATION HAZARD: Not classified. Does not meet aspiration toxicity criteria.
OTHER HEALTH HAZARD INFORMATION None known.
12. ECOLOGICALINFORMATION
ACUTE AQUATIC TOXIGITY:....... ...... No specific test data available for the mixture. Calculated
Estimate: Not classified. Does not meet acute aquatic classification criteria.
CHRONIC AQUATIC TOXIGITY: ........ No speciflc test data available for the mixture. Calculated
Estimate: Aquatic Chronic Category 2.
PERSISTANCE AND BIODEGRADABILITY: No specific test data available for the mixture
MOBILITY IN SOIL: No specific test data available for the mixture
ADDITIONAL ECOTOXICITY INFORMATION:................................... ln the liquid, uncured state, this product may be harmful to
aquatic life long lasting effects. Prevent release to the environment, sewers and natural waters.
lnqredient cAs# EcotoxiciW Glassifi cation lnformation
Propane, 2,2-bis[p-(2,3-epoxypropoxy)phenyl]-, polymers
25085-99-8
Aquatic Chronic Cat. 2
Benzvl alcohol 1 00-51-6 Not Classified
Phenol-formaldehvde oolvmer qlvcidvl ether 28064-144 Aquatic Chronic Cat. 2
13. DISPOSALCONSIDERATIONS
WASTE DISPOSAL METHOD:........ ... Evaluation of this product using RCRA criteria shows that it is not a
hazardouswaste,eitherbylistingorcharacteristics,initspurchasedform. ltistheresponsibilityoftheusertodetermineproperdisposal
methods.
lncinerate, recycle (fuel blending) or reclaim may be preferred methods when conducted in accordance with federal, state and local regulations.
US DOT
U.N./N.A. NUMBER:........ Not regulated
14. TRANSPORTATION INFORMATION
Page 4 of 6 Last Revised: 15JANI9
WEST SYSTEM@ 105 Resin
TECHNICAL SHIPPING NAME
HAZARD CLASS
PACKING GROUP:
CANADA TDG
U.N./N.A. NUMBER:........ Not regulated.
SHIPPING NAME:............. Not applicable.
TECHNICAL SHIPPING NAME Not applicable.
HAZARD CLASS:............ Not applicable.
PACKING GROUP:.......... Not applicable.
IMDG
U.N. NUMBER: ........... UN3082.
SHIPPING NAME:............. Environmentally hazardous substance, liquid, n.o.s.
TECHNICAL SHIPPING NAME: ............. Epoxy Resin.
PACKING GROUP:
Class 9.
PG lll.
F-A, S-F
Yes
EmS Number:
IGAO/IATA
U.N. NUMBER:
MARINE POLLUTANT...
Not applicable.
Not applicable.
Not applicable.
Not applicable.
uN3082.
Environmentally hazardous substance, liquid, n.o.s.
Epoxy Resin.
Class 9.
PG ilt.
Yes
TECHNICAL SHIPPING NAME
SHIPPING NAME:.
HAZARD CLASS:...
PACKING GROUP:
MARINE POLLUTANT:
15. REGULATORY INFORMATION
COUNTRY INVENTORY LIST STATUS
United States TSCA All inqredients are listed or otherwise compliant.
Europe EINECS or ELINCS All inoredients are listed or otherwise comoliant.
Canada CEPA (DSUNDSL) All inqredients are listed or otherwise compliant.
Australia Alcs All inqredients are listed or otherwise comoliant.
Jaoan ENCS All inqredients are listed or otherwise compliant.
South Korea KECI All inoredients are listed or otherwise comoliant.
China IECSC All inqredients are listed or otherwise compliant.
PhilioDines Ptccs All inoredients are listed or otherwise comoliant.
US EPA TSCA Requirements: ........... No data avallable.
Ganada WHMIS Gonfidential Business lnformation (CBl):.............. No data available.
US EPA SARA TITLE lll Reporting and Notification Requirements
to Section 302
to Section 304
to Section 311
to Section 313
No data available.
No data available.
Refer to the health and physical classifications in section 2
No data available.
STATE CODE
1cA
or2
STATE REGULATORY INFORMATION :
Chemicals listed below may be specifically regulated by individual states. For details on state regulatory requirements you should contact the
appropriate state agency.
COMPONENT NAME
/GAS NUMBER
Epichlorohydrin
106-89-8 < 5ppm
1'
These substances are known to the state of California to cause cancer or reproductive harm, or both.
16. OTHER INFORMATION
PREPARED BY:
SDS CONTAGT:
REASON FOR ISSUE:. Updates to sections 3, 8, 11 & 15.
Gougeon Brothers, lnc.
safety@gougeon.com
Health, Safety & Environmental Manager
January 15,2019
August 15, 2016
APPROVAL DATE:
SUPERSEDES DATE:
TITLE
Page 5 of6 Last Revised: 15JAN19
WEST SYSTEM@ 105 Resin
PERSONAL PROTECTION:
SDS VERSION: 105-2019a
OTHER HAZ,ARD INFORMATION AND RATING SYSTEMS:
HMIS@ RATING NFPA@ 704 CODES
Approximate HMIS and NFPA Rr'sk Rallngs Legend:
0 = LoworNone; 1 =Slight; 2 =Moderate; 3 = Serious; 4 = Severe
lnformation in this document is furnished without warranty, expressed or implied, except that it is accurate to the best knowledge of Gougeon Brothers,
lnc. The data on this sheet is related only to the specific material designated herein. Gougeon Brothers, lnc. assumes no legal responsibility for use or
reliance upon these data.
Page 6 of6 Last Revised: l5JAN19
by | Sep 27, 2025
SAFETY DATA SHEET
Revision date 10-Apr-2018 Version 6 Supersedes Date: 02-Nov-2017
Section 1: IDENTIFICATION OF THE SUBSTANCE/MIXTURE AND OF THE
COMPANY/UNDERTAKING
Product identifier
Product Code 27114.04
Product Name White Cr Hrd 4 oz/100 per case
Other means of identification
No information available
Recommended use of the chemical and restrictions on use
Industrial paint (Paint or Paint-Related)
Details of the supplier of the safety data sheet
See section 16 for more
information
The Valspar Corporation
PO Box 1461
Minneapolis, MN 55440
E-mail address msds@valspar.com
Emergency telephone number
United States of America 1-888-345-5732
Section 2: HAZARDS IDENTIFICATION
Classification
Serious eye damage/eye irritation Category 2
Skin sensitization Category 1
Label elements
Organic peroxides Type E
Product Code 27114.04 Page 1 / 8 AGHS – USA OSHA SDS
Section 3: COMPOSITION/INFORMATION ON INGREDIENTS
Chemical Name CAS No weight-%
Dibenzoyl peroxide 94-36-0 25 – 50
Benzoic acid, C9-11-branched alkyl esters 131298-44-7 10 – 25
*The exact percentage (concentration) of composition has been withheld as a trade secret.
Section 4: FIRST AID MEASURES
Signal word WARNING
HAZARD STATEMENTS
Heating may cause a fire
Causes serious eye irritation
May cause an allergic skin reaction
PREVENTION
Wash face, hands and any exposed skin thoroughly after handling. Avoid breathing dust/fume/gas/mist/vapors/spray.
Contaminated work clothing should not be allowed out of the workplace. P210 – Keep away from heat/sparks/open flames/hot
surfaces. – No smoking. Keep/Store away from clothing/ combustible materials. Keep only in original container. Wear protective
gloves/protective clothing/eye protection/face protection.
RESPONSE
Get medical advice/attention if you feel unwell.
Eyes
IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue
rinsing. If eye irritation persists: Get medical advice/attention.
Skin
IF ON SKIN: Wash with plenty of soap and water. If skin irritation or rash occurs: Get medical advice/attention. Wash
contaminated clothing before reuse.
Inhalation
IF INHALED: Call a POISON CENTER or doctor if you feel unwell.
Ingestion
Do NOT induce vomiting. IF SWALLOWED: Call a POISON CENTER or doctor/physician if you feel unwell.
STORAGE
Store at temperatures not exceeding 38 C/ 100 F. Keep cool. Protect from sunlight. Store away from other materials.
DISPOSAL
Dispose of contents/containers in accordance with local regulations.
HAZARDS NOT OTHERWISE CLASSIFIED (HNOC)
No information available.
OTHER HAZARDS
Not applicable.
UNKNOWN ACUTE TOXICITY 0% of the mixture consists of ingredient(s) of unknown toxicity.
Product Code 27114.04 Page 2 / 8 AGHS – USA OSHA SDS
First Aid Measures
General advice
Get medical advice/attention if you feel unwell.
Eye contact
IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue
rinsing. If eye irritation persists: Get medical advice/attention.
Skin Contact
IF ON SKIN: Wash with plenty of soap and water. If skin irritation or rash occurs: Get medical advice/attention. Wash
contaminated clothing before reuse.
Inhalation
IF INHALED: Call a POISON CENTER or doctor if you feel unwell.
Ingestion
Do NOT induce vomiting. IF SWALLOWED: Call a POISON CENTER or doctor/physician if you feel unwell.
Most important symptoms and effects, both acute and delayed
Symptoms No information available.
Indication of any immediate medical attention and special treatment needed
Note to physicians Treat symptomatically.
Section 5: FIRE FIGHTING MEASURES
Suitable extinguishing media
Dry chemical, CO2, water spray or alcohol-resistant foam.
Not to be used for safety reasons: Strong water jet
Specific hazards arising from the chemical
Burning produces heavy smoke. Fire may produce irritating and/or toxic gases. In the event of fire and/or explosion do not breathe
fumes. May cause sensitization by skin contact.
Special protective equipment for fire-fighters
Wear self-contained breathing apparatus and protective suit. Cool containers with flooding quantities of water until well after fire is
out. Do not allow run-off from fire-fighting to enter drains or water courses.
Section 6: ACCIDENTAL RELEASE MEASURES
Personal precautions, protective equipment and emergency procedures
Personal precautions
Avoid breathing vapors or mists. Use personal protective equipment as required. Avoid contact with skin, eyes or clothing.
For emergency responders
Use personal protection recommended in Section 8.
Environmental precautions
Do not allow into any sewer, on the ground or into any body of water. If the product contaminates lakes, rivers or sewage, inform
appropriate authorities in accordance with local regulations. Prevent further leakage or spillage if safe to do so. Local authorities
should be advised if significant spillages cannot be contained.
Methods and material for containment and cleaning up
Methods for containment
Prevent further leakage or spillage if safe to do so.
Product Code 27114.04 Page 3 / 8 AGHS – USA OSHA SDS
Methods for cleaning up
Dispose of waste product or used containers according to local regulations. Clean with detergents. Avoid solvent cleaners. Dam
up. Pick up and transfer to properly labeled containers. Clean contaminated surface thoroughly. Take up mechanically, placing in
appropriate containers for disposal. Contain and collect spillage with an electrically protected vacuum cleaner or by wet-brushing
and place in container for disposal according to local regulations (see section 13).
Section 7: HANDLING AND STORAGE
Precautions for safe handling
Advice on safe handling
Use personal protection recommended in Section 8. Never use pressure to empty container. Comply with the health and safety at
work laws. Prevent product from entering drains. Use only with adequate ventilation. Do not breathe
dust/fume/gas/mist/vapors/spray.
General Hygiene Considerations
When using do not eat, drink or smoke. Wash contaminated clothing before reuse. Avoid contact with skin, eyes or clothing.
Conditions for safe storage, including any incompatibilities
Storage Conditions
Keep/store only in original container. Store in accordance with local regulations. Keep unauthorized personnel away. Containers
that have been opened must be carefully resealed and kept upright to prevent leakage. Keep container tightly closed in a dry and
well-ventilated place.
Incompatible materials
Strong oxidizing agents. Acids.
Section 8: EXPOSURE CONTROLS/PERSONAL PROTECTION
Control parameters
Exposure Limits
If S* appears in the OEL table, it indicates this chemical contains a skin notation.
Chemical Name ACGIH TLV OSHA PEL NIOSH IDLH
Dibenzoyl peroxide
94-36-0
TWA: 5 mg/m
3
TWA: 5 mg/m
3
IDLH: 1500 mg/m
3
TWA: 5 mg/m
3
Appropriate engineering controls
Engineering Controls
Ensure adequate ventilation, especially in confined areas. Provide local exhaust ventilation. In case of insufficient ventilation, wear
suitable respiratory equipment.
Individual protection measures, such as personal protective equipment
Eye/face protection
Tight sealing safety goggles.
Skin and body protection
Wear impervious protective clothing, including boots, gloves, lab coat, apron or coveralls, as appropriate, to prevent skin
contact.
Hand Protection
There is no one glove material or combination of materials that will give unlimited resistance to any individual or combination of
chemicals. Ensure that the breakthrough time of the glove material is not exceeded. Refer to glove supplier for information on
breakthrough time for specific gloves. The instructions and information provided by the glove manufacturer on use, storage,
maintenance and replacement must be followed. Gloves should be replaced regularly and if there is any sign of damage to the
glove material. Always ensure that gloves are free from defects and that they are stored and used correctly. The performance
or effectiveness of the glove may be reduced by physical / chemical damage and poor maintenance. Wear protective gloves.
Respiratory protection
In case of inadequate ventilation wear respiratory protection.
Product Code 27114.04 Page 4 / 8 AGHS – USA OSHA SDS
Thermal Protection
No information available
Section 9: PHYSICAL AND CHEMICAL PROPERTIES
Information on basic physical and chemical properties
Physical state Paste / Solid
Appearance No information available
Odor No information available
Color No information available
Odor Threshold No information available
pH value No information available
Melting point/freezing point No information available
Boiling point / boiling range No information available C / F
flash point 94 C / 201 F
evaporation rate No information available
Flammability (solid, gas) No information available
Flammability Limit in Air
Upper flammability limit: No information available
Lower flammability limit: No information available
Vapor Pressure No information available
vapor density No information available
Density (lbs per US gallon) 10
specific gravity 1.2
Solubility(ies) No information available
Partition coefficient No information available
Autoignition temperature No information available
Decomposition temperature No information available
Kinematic viscosity No information available
Dynamic viscosity No information available
Other information
Section 10: STABILITY AND REACTIVITY
Reactivity No information available.
Chemical stability Stable under normal conditions.
Possibility of Hazardous ReactionsNone under normal processing.
Hazardous polymerization None under normal processing.
Conditions to avoid Heat, flames and sparks.
Incompatible materials Strong oxidizing agents. Acids.
Hazardous Decomposition ProductsCarbon monoxide. Carbon dioxide (CO2).
Section 11: TOXICOLOGICAL INFORMATION
Information on likely routes of exposure
Eye contact
Causes serious eye irritation
Skin Contact
May cause an allergic skin reaction
Ingestion
Not applicable
Inhalation
Not applicable
Product Code 27114.04 Page 5 / 8 AGHS – USA OSHA SDS
Numerical measures of toxicity – Component Information
Chemical Name Oral LD50 Dermal LD50 Inhalation LC50
Dibenzoyl peroxide
94-36-0
= 6400 mg/kg ( Rat ) = 7710 mg/kg
( Rat )
– –
Benzoic acid, C9-11-branched alkyl
esters
131298-44-7
> 5000 mg/kg ( Rat ) > 2000 mg/kg ( Rabbit ) = 3.3 mg/L ( Rat ) 4 h
Numerical measures of toxicity – Product Information
UNKNOWN ACUTE TOXICITY 0% of the mixture consists of ingredient(s) of unknown toxicity.
Delayed and immediate effects as well as chronic effects from short and long-term exposure
Skin corrosion/irritation Not applicable
Serious eye damage/eye irritation Causes serious eye irritation
Skin sensitization May cause an allergic skin reaction
Respiratory sensitization Not applicable
Germ cell mutagenicity Not applicable
Carcinogenicity Not applicable
Reproductive Toxicity Not applicable
Specific target organ toxicity (single exposure) Not applicable
Specific target organ toxicity (repeated exposure) Not applicable
Aspiration hazard Not applicable
Section 12: ECOLOGICAL INFORMATION
Ecotoxicity
Environmental precautions Prevent product from entering drains.
Marine pollutant This material meets the definition of a marine pollutant
Persistence and degradability
No information available
Bioaccumulation
No information available
Mobility
No information available
Other adverse effects No information available
Section 13: DISPOSAL CONSIDERATIONS
Waste treatment methods
Disposal of wastes Disposal should be in accordance with applicable regional, national and local laws and
regulations.
Contaminated packaging Improper disposal or reuse of this container may be dangerous and illegal. Empty
containers must be scrapped or reconditioned.
Section 14: TRANSPORT INFORMATION
DOT IMDG IATA
14.1 UN/ID no UN3108 UN3108 UN3108
14.2 Proper shipping name Organic peroxide type E, solidOrganic peroxide type E, solidOrganic peroxide type E, solid
Dibenzoyl peroxide Dibenzoyl peroxide Dibenzoyl peroxide
Product Code 27114.04 Page 6 / 8 AGHS – USA OSHA SDS
14.5 Environmental hazard
Marine pollutant This material meets the definition of a marine pollutant
Marine pollutant Dibenzoyl peroxide , Zinc stearate
14.7 Transport in bulk according to Annex II of MARPOL 73/78 and the IBC Code No information available
The supplier may apply one of the following exceptions: Combustible Liquid (49 CFR 173.150(f)); Consumer Commodity (49 CFR 173.150(c),
ICAO/IATA SP A112); Limited Quantity (49 CFR 173.150(b), ICAO Part 3 Chapter 4, IATA 2.7, IMDG Chapter 3.4); Viscous Liquid (49 CFR
173.121(b), IMDG 2.3.2.2, IATA 3.3.3.1.1, ICAO 3.2.2, ADR 2.2.3.1.5); Does Not Sustain Combustion (49 CFR 173.120(a), IATA 3.3.1.3, ICAO
3.1.3, IMDG 2.3.1.3, ADR 2.2.3.1.1 Note 1); or others as allowed under hazardous materials/dangerous goods regulations.
Section 15: REGULATORY INFORMATION
International Inventories
TSCA – United States Toxic Substances Control Act Section 8(b) Inventory All components are listed or exempt
from listing.
DSL – Canadian Domestic Substances List All components are listed or exempt
from listing
US Federal Regulations
Chemical Name SARA 313 – Threshold Values
%
Metals Hazardous air pollutants
(HAPs) content
Dibenzoyl peroxide
94-36-0
25 – 50
1
Zinc stearate
557-05-1
5 – 10
1 Zinc
SARA 311/312 Hazard Categories
Acute health hazard Yes
Chronic Health Hazard Yes
Fire hazard No
Sudden release of pressure hazard No
Reactive Hazard Yes
US State Regulations
Rule 66 status of product
Not photochemically reactive.
U.S. EPA Label information
EPA Pesticide registration numberNot applicable
U.S. State Right-to-Know Regulations
Chemical Name
Dibenzoyl peroxide
94-36-0
.
Proprietary Non-Hazardous Ingredient – Proprietary CAS .
Benzoic acid, C9-11-branched alkyl esters
131298-44-7
.
Zinc stearate
557-05-1
.
14.3 Hazard Class 5.2 5.2 5.2
14.4 Packing Group
14.6 Special Provisions A20, A802
Emergency Response Guide
Number
145
122, 274
Product Code 27114.04 Page 7 / 8 AGHS – USA OSHA SDS
EmS-No
F-J, S-R
Calcium sulfate
7778-18-9
.
Section 16: OTHER INFORMATION
HMIS
Health hazards 2
Flammability 1
Physical hazards 1
Personal Protection X
Supplier Address
Prepared By Product Stewardship
Revision date 10-Apr-2018
Revision Note No information available
Disclaimer
The information on this Safety Data Sheet (SDS) is based on the present state of our knowledge, current national
legislation and guidelines. As the specific conditions of use of the product are outside the supplier’s knowledge and
control the user is responsible for ensuring that the requirements of relevant legislation are complied with. This SDS
should not be construed as any guarantee of the technical performance or suitability for particular applications. UNLESS
SUPPLIER AGREES OTHERWISE IN WRITING, SUPPLIER MAKES NO WARRANTIES, EXPRESS OR IMPLIED, AND
DISCLAIMS ALL IMPLIED WARRANTIES INCLUDING WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR USE OR FREEDOM FROM PATENT INFRINGEMENT. SUPPLIER WILL NOT BE LIABLE FOR ANY SPECIAL,
INCIDENTAL OR CONSEQUENTIAL DAMAGES.
End of Safety Data Sheet
Valspar Coatings
701 Shiloh Rd.
Garland, TX 75042
972-276-5181
Product Code 27114.04 Page 8 / 8 AGHS – USA OSHA SDS
by | Sep 27, 2025
Page 1 of 5 Revision Date: 02/27/2012
SAFETY DATA SHEET
1.0 IDENTIFICATION
1.1 GHS product identifier: Peroxide Cream Hardener
1.2 Other means of identification: Organic Peroxide, 35% in inert fillers
1.3 Recommended use of the chemical and restrictions on use: N/A
1.4 Supplier’s details: QUALITY HARDENER
PO BOX 2385
RIVERVIEW MI 48192
INFORMATION PHONE: (248) 588-2270
1.5 Emergency phone number: (703) 527-3887(Call Collect)
2.0 HAZARDS IDENTIFICATION
2.1 Classification of the substance or mixture:
Organic Peroxide B, Skin Corrosion/Irritation 2, Eye Damage/Irritation 2B, Skin Sensitive 1, Specific target
organ toxicity – Single exposure 3
2.2 GHS label elements:
Signal Word: Danger
Hazard Statement: Heating may cause a fire or explosion
Prevention: Keep away from heat/sparks/open flames/hot surfaces. No smoking. Keep away
from combustible materials. Keep only in original container. Wear protective gloves/eye
protection/face protection.
Storage: Store at temperatures not exceeding 32 C (90 F). Strong Oxidizer. Keep cool. Protect
from sunlight. Contact with other materials may cause fire.
Disposal: Dispose of contents/container by incineration under controlled conditions in accordance
with all local and national laws and regulations.
Signal Word: Warning
Hazard Statement: Causes skin irritation
Prevention: Wash hands thoroughly after handling. Wear protective gloves.
Response: If on skin: wash with plenty of soap and water. If skin irritation occurs: get medical
advice/attention. Take off contaminated clothing and wash before reuse.
Signal Word: Warning
Hazard Statement: Causes eye irritation
Prevention: Flush eyes thoroughly after eye contact.
Response: If in eyes: rinse cautiously with water for several minutes. Remove contact lenses, if
present and easy to do. Continue rinsing. If eye irritation persists: get medical advice/attention.
Signal Word: Warning
Hazard Statement: May cause an allergic skin reaction
Prevention: Avoid breathing dust/fume/gas/mist/vapors/spray. Contaminated work clothing must
not be allowed out of the workplace. Wear protective gloves.
Response: If on skin: wash with plenty of soap and water. If skin irritation or rash occurs: get
medical advice/attention. Wash contaminated clothing before reuse.
Signal Word: Warning
Hazard Statement: May cause respiratory irritation
Prevention: Avoid breathing dust/fume/gas/mist/vapors/spray. Use only outdoors or in a well-
ventilated area.
Response: If inhaled, remove victim to fresh air and keep at rest in a position comfortable for
breathing. Call a poison center or doctor/physician if you feel unwell.
Storage: Store in a well-ventilated place. Keep container tightly closed. Store locked up.
Disposal: Dispose of contents/container by incineration under controlled conditions in accordance
with all local and national laws and regulations.
2.3 Other hazards which do not result in classification: N/A
Page 2 of 5 Revision Date: 02/27/2012
2.4 Hazards Material Information System (United States):
Health 2
Flammability 2
Physical Hazard 2
Hazard Codes: *=Chronic Hazard 0=Minimal Hazard, 1=Slight Hazard, 2=Moderate Hazard, 3=Serious Hazard,
4=Severe Hazard
3.0 COMPOSITION/INFORMATION ON INGREDIENTS 3.1 Mixtures
Chemical Identity CAS No. Concentration
Dibenzoyl Peroxide 94-36-0 34-35%
PLASTICIZER (Proprietary, Ester based, non-Pthalate) 800951-5002-p 27-30%
CALCIUM CARBONATE 471-34-1 15-19%
WATER 7732-18-5 10-13%
SURFACTANT (Proprietary, Ethoxylated Alkyl Phenol) 800951-5003-P 1-4%
Fumed Silica 7631-86-9 0-4%
4.0 FIRST-AID MEASURES
4.1 Description of necessary first-aid measures:
Eyes: Immediately flush eyes with plenty of water for at least 15 minutes, lifting lower and upper eyelids
occasionally. Get medical attention immediately.
Skin: Immediately flush skin with plenty of soap and water. Remove contaminated clothing and shoes. Get medical
attention. Wash clothing before reuse.
Ingestion: Do not induce vomiting, get medical attention immediately.
Inhalation: Remove to fresh air. Get medical for any breathing difficulty.
4.2 Most Important symptoms/effects, acute and delayed:
Potential Health Effects: Eyes; Vapor or mist causes eye irritation. Splashes cause severe irritation with stinging
pain and tears.
Skin: Causes irritation with redness and pain, and skin sensitization in some individuals. Stinging or burning
sensation may occur for a brief time after application to skin.
Ingestion: Causes irritation to the gastrointestinal tract. Symptoms may include nausea, vomiting and diarrhea.
Inhalation: Decomposition products are toxic and inhalation of the products can produce life threatening health
effects.
4.3 Indication of immediate medical attention and special treatment needed, if necessary: N/A
5.0 FIRE-FIGHTING MEASURES
5.1 Suitable extinguishing media: Dry Chemical or carbon dioxide. Water to cool containers. Water or foam may cause
frothing.
5.2 Specific hazards arising from the chemical: Flash Point is 184 F (84 C).
5.3 Special protective actions for fire-fighters: Wear full protective clothing and NIOSH- approved self-contained
breathing apparatus with full face piece operated in the pressure demand or other positive pressure mode.
6.0 ACCIDENTAL RELEASE MEASURES
6.1 Personal precautions, protective equipment and emergency procedures:
Remove all sources of ignition, ventilate area of leak or spill.
6.2 Methods and materials for containment and clean up:
Contain discharged material. Spill can be mixed with water wetted vermiculite, swept up and then placed into
appropriate plastic containers for immediate disposal.
7.0 HANDLING AND STORAGE
7.1 Precautions for safe handling: Avoid strong acids, strong alkalis, polymerization accelerators (Cobalt Napthanates,
DMA, DEA).
7.2 Conditions for safe storage, including any incompatibilities: Stores best below 90 F, Black Cream Hardener has
a 12 month shelf life, Red and White Cream Hardener have an 18 month shelf life.
Page 3 of 5 Revision Date: 02/27/2012
8.0 EXPOSURE CONTROLS/PERSONAL PROTECTION 8.1 Control parameters
Component CAS No. EINECS P ercent Exposure Limits Source
Dibenzoyl Peroxide 94-36-0 202-327-6 35%
5mg/m3 PEL
5mg/m3 TLV
OSHA
ACGIH
8.2 Appropriate engineering controls: N/A
8.3 Individual protection measures, such as personal protective equipment:
Eye Protection: Chemical safety glasses. A full-face shield and vapor respirator is recommended for operations
involving spraying or other operations placing this material under pressurized conditions.
Hand Protection: Neoprene rubber gloves. Impermeable gloves. Nitrile rubber gloves. The breakthrough time of
the selected glove(s) must be greater than the intended use period.
Respiratory protection: Not required under normal conditions and in a well-ventilated workplace. At elevated
temperatures, a cartridge mask National Institute for Occupational Safety and Health (NIOSH) approved for organic
vapors may be appropriate.
Protective clothing: Long sleeved clothing.
Work and hygienic practices: Provide readily accessible eye wash stations and safety showers. Wash at the end of
each work shift and before eating, smoking or using the toilet.
Notice: The selection of a specific glove for a particular application and duration of use in a workplace should also
take into account all requisite workplace factors such as, but not limited to: Other chemicals which may be handled,
physical requirements (cut/puncture protection, dexterity, thermal protection), as well as the
instructions/specifications provided by the glove supplier.
9.0 PHYSICAL AND CHEMICAL PROPERTIES
9.1 Appearance (physical state, color, etc.): Thixotropic Paste, White, Red, Black
9.2 Odor: Ester-type odor
9.3 Odor threshold: N/A
9.4 pH: Not Determined
9.5 Melting point/freezing point: Not Determined
9.6 Initial boiling point and boiling range: (Dibenzoyl Peroxide) Decomposes explosively above 55 C
9.7 Flash Point: 184 F (84 C) Setaflash
9.8 Evaporation rate: N/A
9.9 Flammability (solid, gas): N/A
9.10 Upper/lower flammability or explosive limits: LFL-Not Determined; UFL-Not Determined
9.11 Vapor pressure: 0.67-0.93 kPa
9.12 Vapor density: N/A
9.13 Relative density (Specific gravity): 1.30-1.33
9.14 Solubility(ies): Negligible
9.15 Partition coefficient; n-octanol/water: N/A
9.16 Auto-ignition temperature: N/A
9.17 Decomposition temperature (SADT): 55 C
9.18 Viscosity: N/A
9.19 VOC Content: 0 g/liter (0%)
10.0 STABILITY AND REACTIVITY
10.1 Reactivity: N/A
10.2 Chemical stability: Stable
10.3 Possibility of hazardous reactions: Will occur
10.4 Conditions to avoid: excessive heat; contaminates; ignition sources
10.5 Incompatible materials: Strong acids, accelerators
10.6 Hazardous decomposition products: Flammable
11.0 TOXICOLOGICAL INFORMATION
11.1 Likely routes of exposure: Skin, Eye, Inhalation, Ingestion
11.2 Symptoms related to the physical, chemical and toxicological characteristics:
Page 4 of 5 Revision Date: 02/27/2012
Acute toxicity: This finished product has not been tested to determine individual toxicological/ecological limits.
Individual components of this mixture have been independently tested by the raw material manufacturers and any
known results have been presented below. The results for the individual components may not be representative of
the toxicity of this finished product.
Skin Contact: Causes skin irritation.
Skin Absorption: May be harmful if absorbed through the skin.
Eye Contact: Causes eye irritation.
Inhalation: May be harmful if inhaled. Material is irritating to mucous membranes and upper respiratory tract.
Ingestion: May be harmful if swallowed.
Sensitization:
Respiratory: May cause allergic respiratory reaction.
Skin: May cause allergic skin reaction.
Signs and symptoms of exposure: Depending on the intensity and duration of exposure, effects may vary from
mild irritation to severe destruction of tissue.
11.3 Delayed and immediate effects and also chronic effects from short and long term exposure:
Chronic exposure: CARCINOGEN; Result: This product is or contains a component that is not classifiable as to its
carcinogenicity based on its IARC, ACGIH, NTP, or EPA classification.
Chronic exposure: MUTAGEN; Result: Laboratory experiments have shown mutagenic effects.
11.4 Numerical measures of toxicity: N/A
12.0 ECOLOGICAL INFORMATION
12.1 Ecotoxicity: There is not any data on aquatic life effects or the environmental fate.
12.2 Persistence and degradability: N/A
12.3 Bioaccumulative potential: N/A
12.4 Mobility in soil: N/A
12.5 Other adverse effects: N/A
13.0 DISPOSAL CONSIDERATIONS
13.1 Disposal methods: Preferred method of disposal includes incineration under controlled conditions in accordance
with all local and national laws and regulations. The generation of waste should be avoided or minimized wherever
possible. Untreated material is not suitable for disposal. Waste, even small quantities, should never be poured down
drains, sewers or watercourses. Waste must be disposed of in accordance with federal, state and local environmental
control regulations. This material, when properly mixed and cured with its resin component at the proper mix ratio,
may be safely landfilled.
Contaminated packaging: Empty containers can only be disposed of when the remaining product adhering to the
container walls has been removed. Hazard warning labels should be removed from the container only after it has
been properly emptied.
14.0 TRANSPORT INFORMATION
14.1 UN number: UN-3108
14.2 UN proper shipping name: Organic Peroxide Type E, Solid (35% Dibenzoyl Peroxide)
14.3 Transport hazard class(es): 5.2
14.4 Packing group, if applicable: II
14.5 Environmental hazards: N/A
14.6 Transport in bulk: N/A
14.7 Special precautions for user: The following must be typed on Dangerous Goods paperwork THE PACKAGE
CONTAINING UN3108 MUST BE SHADED FROM DIRECT SUNLIGHT, STORED AWAY FROM ALL
SOURCES OF HEAT, IN A WELL VENTILATED AREA.
15.0 REGULATORY INFORMATION
15.1 Safety, health and environmental regulations:
TOXIC SUBSTANCES CO NTROL ACT (TSCA): All components are included in the EPA Toxic Substances
Control Act (TSCA) Chemical Substance Inventory.
TOXIC SUBSTANCE CONTROL ACT (TSCA) 12(b) COMPONENT(S): None
OSHA Hazard Communication Standard (29CFR1910.1200) hazard class(es): Irritant. Sensitizer.
EPA SARA Title III Section 312 (40CFR370) hazard class: Immediate Health Hazard. Delayed Health Hazard.
EPA SARA Title III Section 313 (40CFR372) toxic chemicals above “de minimis” level are: Dibenzoyl
Peroxide, 35% (CAS#94-36-0)
Page 5 of 5 Revision Date: 02/27/2012
CALIFORNIA PROPOSITION 65: SUBSTANCES (component(s) known to the State of California to cause
cancer and/or reproductive toxicity and subject to warning and discharge requirements under the “Safe Drinking
Water and Toxic Enforcement Act of 1986”) None
CANADA REGULATIONS
DSL: Included on Inventory.
WHMIS HAZARD CLASSIFICATION: Class C (oxidizing material) Class D2B (material causing other toxic
effects, toxic materials)
HAZARDOUS PRODUCTS ACT INFORMATION: This product contains the following ingredients which are
Controlled Products and/or on the Ingredient Disclosure List (Canadian HPA section 13 and 14): NONE
WHMIS TRADE SECRET REGISTRY NUMBER(S): NONE
This product has been classified in accordance with the hazard criteria of the CPR and the MSDS contains all the
information required by the CPR. None
WHMIS SYMBOLS
16.0 OTHER INFORMATION
16.1 Date of Preparation: 12/27/2012
To the best of our knowledge, the information contained herein is accurate. Final determination of the suitability of any material
is the sole responsibility of the users. All materials may present unknown hazards and should be used with caution. Although
certain hazards are described herein, we cannot guarantee that these are the only hazards which exist.
by | Sep 27, 2025
SAFETY DATA SHEET
Revision date 10-Apr-2018 Version 4 Supersedes Date: 02-Nov-2017
Section 1: IDENTIFICATION OF THE SUBSTANCE/MIXTURE AND OF THE
COMPANY/UNDERTAKING
Product identifier
Product Code 27627.01
Product Name White Cream Hdnr Ctn 1oz / 250 per case
Other means of identification
No information available
Recommended use of the chemical and restrictions on use
Industrial paint (Paint or Paint-Related)
Details of the supplier of the safety data sheet
See section 16 for more
information
The Valspar Corporation
PO Box 1461
Minneapolis, MN 55440
E-mail address msds@valspar.com
Emergency telephone number
United States of America 1-888-345-5732
Section 2: HAZARDS IDENTIFICATION
Classification
Serious eye damage/eye irritation Category 2
Skin sensitization Category 1
Label elements
Organic peroxides Type E
Product Code 27627.01 Page 1 / 8 AGHS – USA OSHA SDS
Section 3: COMPOSITION/INFORMATION ON INGREDIENTS
Chemical Name CAS No weight-%
Dibenzoyl peroxide 94-36-0 25 – 50
Benzoic acid, C9-11-branched alkyl esters 131298-44-7 10 – 25
*The exact percentage (concentration) of composition has been withheld as a trade secret.
Section 4: FIRST AID MEASURES
Signal word WARNING
HAZARD STATEMENTS
Heating may cause a fire
Causes serious eye irritation
May cause an allergic skin reaction
PREVENTION
Wash face, hands and any exposed skin thoroughly after handling. Avoid breathing dust/fume/gas/mist/vapors/spray.
Contaminated work clothing should not be allowed out of the workplace. P210 – Keep away from heat/sparks/open flames/hot
surfaces. – No smoking. Keep/Store away from clothing/ combustible materials. Keep only in original container. Wear protective
gloves/protective clothing/eye protection/face protection.
RESPONSE
Get medical advice/attention if you feel unwell.
Eyes
IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue
rinsing. If eye irritation persists: Get medical advice/attention.
Skin
IF ON SKIN: Wash with plenty of soap and water. If skin irritation or rash occurs: Get medical advice/attention. Wash
contaminated clothing before reuse.
Inhalation
IF INHALED: Call a POISON CENTER or doctor if you feel unwell.
Ingestion
Do NOT induce vomiting. IF SWALLOWED: Call a POISON CENTER or doctor/physician if you feel unwell.
STORAGE
Store at temperatures not exceeding 38 C/ 100 F. Keep cool. Protect from sunlight. Store away from other materials.
DISPOSAL
Dispose of contents/containers in accordance with local regulations.
HAZARDS NOT OTHERWISE CLASSIFIED (HNOC)
No information available.
OTHER HAZARDS
Not applicable.
UNKNOWN ACUTE TOXICITY 0% of the mixture consists of ingredient(s) of unknown toxicity.
Product Code 27627.01 Page 2 / 8 AGHS – USA OSHA SDS
First Aid Measures
General advice
Get medical advice/attention if you feel unwell.
Eye contact
IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue
rinsing. If eye irritation persists: Get medical advice/attention.
Skin Contact
IF ON SKIN: Wash with plenty of soap and water. If skin irritation or rash occurs: Get medical advice/attention. Wash
contaminated clothing before reuse.
Inhalation
IF INHALED: Call a POISON CENTER or doctor if you feel unwell.
Ingestion
Do NOT induce vomiting. IF SWALLOWED: Call a POISON CENTER or doctor/physician if you feel unwell.
Most important symptoms and effects, both acute and delayed
Symptoms No information available.
Indication of any immediate medical attention and special treatment needed
Note to physicians Treat symptomatically.
Section 5: FIRE FIGHTING MEASURES
Suitable extinguishing media
Dry chemical, CO2, water spray or alcohol-resistant foam.
Not to be used for safety reasons: Strong water jet
Specific hazards arising from the chemical
Burning produces heavy smoke. Fire may produce irritating and/or toxic gases. In the event of fire and/or explosion do not breathe
fumes. May cause sensitization by skin contact.
Special protective equipment for fire-fighters
Wear self-contained breathing apparatus and protective suit. Cool containers with flooding quantities of water until well after fire is
out. Do not allow run-off from fire-fighting to enter drains or water courses.
Section 6: ACCIDENTAL RELEASE MEASURES
Personal precautions, protective equipment and emergency procedures
Personal precautions
Avoid breathing vapors or mists. Use personal protective equipment as required. Avoid contact with skin, eyes or clothing.
For emergency responders
Use personal protection recommended in Section 8.
Environmental precautions
Do not allow into any sewer, on the ground or into any body of water. If the product contaminates lakes, rivers or sewage, inform
appropriate authorities in accordance with local regulations. Prevent further leakage or spillage if safe to do so. Local authorities
should be advised if significant spillages cannot be contained.
Methods and material for containment and cleaning up
Methods for containment
Prevent further leakage or spillage if safe to do so.
Product Code 27627.01 Page 3 / 8 AGHS – USA OSHA SDS
Methods for cleaning up
Dispose of waste product or used containers according to local regulations. Clean with detergents. Avoid solvent cleaners. Dam
up. Pick up and transfer to properly labeled containers. Clean contaminated surface thoroughly. Take up mechanically, placing in
appropriate containers for disposal. Contain and collect spillage with an electrically protected vacuum cleaner or by wet-brushing
and place in container for disposal according to local regulations (see section 13).
Section 7: HANDLING AND STORAGE
Precautions for safe handling
Advice on safe handling
Use personal protection recommended in Section 8. Never use pressure to empty container. Comply with the health and safety at
work laws. Prevent product from entering drains. Use only with adequate ventilation. Do not breathe
dust/fume/gas/mist/vapors/spray.
General Hygiene Considerations
When using do not eat, drink or smoke. Wash contaminated clothing before reuse. Avoid contact with skin, eyes or clothing.
Conditions for safe storage, including any incompatibilities
Storage Conditions
Keep/store only in original container. Store in accordance with local regulations. Keep unauthorized personnel away. Containers
that have been opened must be carefully resealed and kept upright to prevent leakage. Keep container tightly closed in a dry and
well-ventilated place.
Incompatible materials
Strong oxidizing agents. Acids.
Section 8: EXPOSURE CONTROLS/PERSONAL PROTECTION
Control parameters
Exposure Limits
If S* appears in the OEL table, it indicates this chemical contains a skin notation.
Chemical Name ACGIH TLV OSHA PEL NIOSH IDLH
Dibenzoyl peroxide
94-36-0
TWA: 5 mg/m
3
TWA: 5 mg/m
3
IDLH: 1500 mg/m
3
TWA: 5 mg/m
3
Appropriate engineering controls
Engineering Controls
Ensure adequate ventilation, especially in confined areas. Provide local exhaust ventilation. In case of insufficient ventilation, wear
suitable respiratory equipment.
Individual protection measures, such as personal protective equipment
Eye/face protection
Tight sealing safety goggles.
Skin and body protection
Wear impervious protective clothing, including boots, gloves, lab coat, apron or coveralls, as appropriate, to prevent skin
contact.
Hand Protection
There is no one glove material or combination of materials that will give unlimited resistance to any individual or combination of
chemicals. Ensure that the breakthrough time of the glove material is not exceeded. Refer to glove supplier for information on
breakthrough time for specific gloves. The instructions and information provided by the glove manufacturer on use, storage,
maintenance and replacement must be followed. Gloves should be replaced regularly and if there is any sign of damage to the
glove material. Always ensure that gloves are free from defects and that they are stored and used correctly. The performance
or effectiveness of the glove may be reduced by physical / chemical damage and poor maintenance. Wear protective gloves.
Respiratory protection
In case of inadequate ventilation wear respiratory protection.
Product Code 27627.01 Page 4 / 8 AGHS – USA OSHA SDS
Thermal Protection
No information available
Section 9: PHYSICAL AND CHEMICAL PROPERTIES
Information on basic physical and chemical properties
Physical state Paste / Solid
Appearance No information available
Odor No information available
Color No information available
Odor Threshold No information available
pH value No information available
Melting point/freezing point No information available
Boiling point / boiling range No information available C / F
flash point 94 C / 201 F
evaporation rate No information available
Flammability (solid, gas) No information available
Flammability Limit in Air
Upper flammability limit: No information available
Lower flammability limit: No information available
Vapor Pressure No information available
vapor density No information available
Density (lbs per US gallon) 10
specific gravity 1.2
Solubility(ies) No information available
Partition coefficient No information available
Autoignition temperature No information available
Decomposition temperature No information available
Kinematic viscosity No information available
Dynamic viscosity No information available
Other information
Section 10: STABILITY AND REACTIVITY
Reactivity No information available.
Chemical stability Stable under normal conditions.
Possibility of Hazardous ReactionsNone under normal processing.
Hazardous polymerization None under normal processing.
Conditions to avoid Heat, flames and sparks.
Incompatible materials Strong oxidizing agents. Acids.
Hazardous Decomposition ProductsCarbon monoxide. Carbon dioxide (CO2).
Section 11: TOXICOLOGICAL INFORMATION
Information on likely routes of exposure
Eye contact
Causes serious eye irritation
Skin Contact
May cause an allergic skin reaction
Ingestion
Not applicable
Inhalation
Not applicable
Product Code 27627.01 Page 5 / 8 AGHS – USA OSHA SDS
Numerical measures of toxicity – Component Information
Chemical Name Oral LD50 Dermal LD50 Inhalation LC50
Dibenzoyl peroxide
94-36-0
= 6400 mg/kg ( Rat ) = 7710 mg/kg
( Rat )
– –
Benzoic acid, C9-11-branched alkyl
esters
131298-44-7
> 5000 mg/kg ( Rat ) > 2000 mg/kg ( Rabbit ) = 3.3 mg/L ( Rat ) 4 h
Numerical measures of toxicity – Product Information
UNKNOWN ACUTE TOXICITY 0% of the mixture consists of ingredient(s) of unknown toxicity.
Delayed and immediate effects as well as chronic effects from short and long-term exposure
Skin corrosion/irritation Not applicable
Serious eye damage/eye irritation Causes serious eye irritation
Skin sensitization May cause an allergic skin reaction
Respiratory sensitization Not applicable
Germ cell mutagenicity Not applicable
Carcinogenicity Not applicable
Reproductive Toxicity Not applicable
Specific target organ toxicity (single exposure) Not applicable
Specific target organ toxicity (repeated exposure) Not applicable
Aspiration hazard Not applicable
Section 12: ECOLOGICAL INFORMATION
Ecotoxicity
Environmental precautions Prevent product from entering drains.
Marine pollutant This material meets the definition of a marine pollutant
Persistence and degradability
No information available
Bioaccumulation
No information available
Mobility
No information available
Other adverse effects No information available
Section 13: DISPOSAL CONSIDERATIONS
Waste treatment methods
Disposal of wastes Disposal should be in accordance with applicable regional, national and local laws and
regulations.
Contaminated packaging Improper disposal or reuse of this container may be dangerous and illegal. Empty
containers must be scrapped or reconditioned.
Section 14: TRANSPORT INFORMATION
DOT IMDG IATA
14.1 UN/ID no UN3108 UN3108 UN3108
14.2 Proper shipping name Organic peroxide type E, solidOrganic peroxide type E, solidOrganic peroxide type E, solid
Dibenzoyl peroxide Dibenzoyl peroxide Dibenzoyl peroxide
Product Code 27627.01 Page 6 / 8 AGHS – USA OSHA SDS
14.5 Environmental hazard
Marine pollutant This material meets the definition of a marine pollutant
Marine pollutant Dibenzoyl peroxide , Zinc stearate
14.7 Transport in bulk according to Annex II of MARPOL 73/78 and the IBC Code No information available
The supplier may apply one of the following exceptions: Combustible Liquid (49 CFR 173.150(f)); Consumer Commodity (49 CFR 173.150(c),
ICAO/IATA SP A112); Limited Quantity (49 CFR 173.150(b), ICAO Part 3 Chapter 4, IATA 2.7, IMDG Chapter 3.4); Viscous Liquid (49 CFR
173.121(b), IMDG 2.3.2.2, IATA 3.3.3.1.1, ICAO 3.2.2, ADR 2.2.3.1.5); Does Not Sustain Combustion (49 CFR 173.120(a), IATA 3.3.1.3, ICAO
3.1.3, IMDG 2.3.1.3, ADR 2.2.3.1.1 Note 1); or others as allowed under hazardous materials/dangerous goods regulations.
Section 15: REGULATORY INFORMATION
International Inventories
TSCA – United States Toxic Substances Control Act Section 8(b) Inventory All components are listed or exempt
from listing.
DSL – Canadian Domestic Substances List All components are listed or exempt
from listing
US Federal Regulations
Chemical Name SARA 313 – Threshold Values
%
Metals Hazardous air pollutants
(HAPs) content
Dibenzoyl peroxide
94-36-0
25 – 50
1
Zinc stearate
557-05-1
5 – 10
1 Zinc
SARA 311/312 Hazard Categories
Acute health hazard Yes
Chronic Health Hazard Yes
Fire hazard No
Sudden release of pressure hazard No
Reactive Hazard Yes
US State Regulations
Rule 66 status of product
Not photochemically reactive.
U.S. EPA Label information
EPA Pesticide registration numberNot applicable
U.S. State Right-to-Know Regulations
Chemical Name
Dibenzoyl peroxide
94-36-0
.
Proprietary Non-Hazardous Ingredient – Proprietary CAS .
Benzoic acid, C9-11-branched alkyl esters
131298-44-7
.
Zinc stearate
557-05-1
.
14.3 Hazard Class 5.2 5.2 5.2
14.4 Packing Group
14.6 Special Provisions A20, A802
Emergency Response Guide
Number
145
122, 274
Product Code 27627.01 Page 7 / 8 AGHS – USA OSHA SDS
EmS-No
F-J, S-R
Calcium sulfate
7778-18-9
.
Section 16: OTHER INFORMATION
HMIS
Health hazards 2
Flammability 1
Physical hazards 1
Personal Protection X
Supplier Address
Prepared By Product Stewardship
Revision date 10-Apr-2018
Revision Note No information available
Disclaimer
The information on this Safety Data Sheet (SDS) is based on the present state of our knowledge, current national
legislation and guidelines. As the specific conditions of use of the product are outside the supplier’s knowledge and
control the user is responsible for ensuring that the requirements of relevant legislation are complied with. This SDS
should not be construed as any guarantee of the technical performance or suitability for particular applications. UNLESS
SUPPLIER AGREES OTHERWISE IN WRITING, SUPPLIER MAKES NO WARRANTIES, EXPRESS OR IMPLIED, AND
DISCLAIMS ALL IMPLIED WARRANTIES INCLUDING WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR USE OR FREEDOM FROM PATENT INFRINGEMENT. SUPPLIER WILL NOT BE LIABLE FOR ANY SPECIAL,
INCIDENTAL OR CONSEQUENTIAL DAMAGES.
End of Safety Data Sheet
Valspar Coatings
701 Shiloh Rd.
Garland, TX 75042
972-276-5181
Product Code 27627.01 Page 8 / 8 AGHS – USA OSHA SDS
by | Sep 27, 2025
SAFETY DATA SHEET
Revision date 18-Apr-2018 Version 3 Supersedes Date: 02-Nov-2017
Section 1: IDENTIFICATION OF THE SUBSTANCE/MIXTURE AND OF THE
COMPANY/UNDERTAKING
Product identifier
Product Code 27037.01
Product Name 1 oz Hardener – Black / 250 per case
Other means of identification
No information available
Recommended use of the chemical and restrictions on use
Industrial paint (Paint or Paint-Related)
Details of the supplier of the safety data sheet
See section 16 for more
information
The Valspar Corporation
PO Box 1461
Minneapolis, MN 55440
E-mail address msds@valspar.com
Emergency telephone number
United States of America 1-888-345-5732
Section 2: HAZARDS IDENTIFICATION
Classification
Serious eye damage/eye irritation Category 2
Skin sensitization Category 1
Label elements
Organic peroxides Type E
Product Code 27037.01 Page 1 / 8 AGHS – USA OSHA SDS
Section 3: COMPOSITION/INFORMATION ON INGREDIENTS
Chemical Name CAS No weight-%
Dibenzoyl peroxide 94-36-0 25 – 50
Benzoic acid, C9-11-branched alkyl esters 131298-44-7 10 – 25
*The exact percentage (concentration) of composition has been withheld as a trade secret.
Section 4: FIRST AID MEASURES
Signal word WARNING
HAZARD STATEMENTS
Heating may cause a fire
Causes serious eye irritation
May cause an allergic skin reaction
PREVENTION
Wash face, hands and any exposed skin thoroughly after handling. Avoid breathing dust/fume/gas/mist/vapors/spray.
Contaminated work clothing should not be allowed out of the workplace. P210 – Keep away from heat/sparks/open flames/hot
surfaces. – No smoking. Keep/Store away from clothing/ combustible materials. Keep only in original container. Wear protective
gloves/protective clothing/eye protection/face protection.
RESPONSE
Get medical advice/attention if you feel unwell.
Eyes
IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue
rinsing. If eye irritation persists: Get medical advice/attention.
Skin
IF ON SKIN: Wash with plenty of soap and water. If skin irritation or rash occurs: Get medical advice/attention. Wash
contaminated clothing before reuse.
Inhalation
IF INHALED: Call a POISON CENTER or doctor if you feel unwell.
Ingestion
Do NOT induce vomiting. IF SWALLOWED: Call a POISON CENTER or doctor/physician if you feel unwell.
STORAGE
Store at temperatures not exceeding 38 C/ 100 F. Keep cool. Protect from sunlight. Store away from other materials.
DISPOSAL
Dispose of contents/containers in accordance with local regulations.
HAZARDS NOT OTHERWISE CLASSIFIED (HNOC)
No information available.
OTHER HAZARDS
Not applicable.
UNKNOWN ACUTE TOXICITY 0% of the mixture consists of ingredient(s) of unknown toxicity.
Product Code 27037.01 Page 2 / 8 AGHS – USA OSHA SDS
First Aid Measures
General advice
Get medical advice/attention if you feel unwell.
Eye contact
IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue
rinsing. If eye irritation persists: Get medical advice/attention.
Skin Contact
IF ON SKIN: Wash with plenty of soap and water. If skin irritation or rash occurs: Get medical advice/attention. Wash
contaminated clothing before reuse.
Inhalation
IF INHALED: Call a POISON CENTER or doctor if you feel unwell.
Ingestion
Do NOT induce vomiting. IF SWALLOWED: Call a POISON CENTER or doctor/physician if you feel unwell.
Most important symptoms and effects, both acute and delayed
Symptoms No information available.
Indication of any immediate medical attention and special treatment needed
Note to physicians Treat symptomatically.
Section 5: FIRE FIGHTING MEASURES
Suitable extinguishing media
Dry chemical, CO2, water spray or alcohol-resistant foam.
Not to be used for safety reasons: Strong water jet
Specific hazards arising from the chemical
Burning produces heavy smoke. Fire may produce irritating and/or toxic gases. In the event of fire and/or explosion do not breathe
fumes. May cause sensitization by skin contact.
Special protective equipment for fire-fighters
Wear self-contained breathing apparatus and protective suit. Cool containers with flooding quantities of water until well after fire is
out. Do not allow run-off from fire-fighting to enter drains or water courses.
Section 6: ACCIDENTAL RELEASE MEASURES
Personal precautions, protective equipment and emergency procedures
Personal precautions
Avoid breathing vapors or mists. Use personal protective equipment as required. Avoid contact with skin, eyes or clothing.
For emergency responders
Use personal protection recommended in Section 8.
Environmental precautions
Do not allow into any sewer, on the ground or into any body of water. If the product contaminates lakes, rivers or sewage, inform
appropriate authorities in accordance with local regulations. Prevent further leakage or spillage if safe to do so. Local authorities
should be advised if significant spillages cannot be contained.
Methods and material for containment and cleaning up
Methods for containment
Prevent further leakage or spillage if safe to do so.
Product Code 27037.01 Page 3 / 8 AGHS – USA OSHA SDS
Methods for cleaning up
Dispose of waste product or used containers according to local regulations. Clean with detergents. Avoid solvent cleaners. Dam
up. Pick up and transfer to properly labeled containers. Clean contaminated surface thoroughly. Take up mechanically, placing in
appropriate containers for disposal. Contain and collect spillage with an electrically protected vacuum cleaner or by wet-brushing
and place in container for disposal according to local regulations (see section 13).
Section 7: HANDLING AND STORAGE
Precautions for safe handling
Advice on safe handling
Use personal protection recommended in Section 8. Never use pressure to empty container. Comply with the health and safety at
work laws. Prevent product from entering drains. Use only with adequate ventilation. Do not breathe
dust/fume/gas/mist/vapors/spray.
General Hygiene Considerations
When using do not eat, drink or smoke. Wash contaminated clothing before reuse. Avoid contact with skin, eyes or clothing.
Conditions for safe storage, including any incompatibilities
Storage Conditions
Keep/store only in original container. Store in accordance with local regulations. Keep unauthorized personnel away. Containers
that have been opened must be carefully resealed and kept upright to prevent leakage. Keep container tightly closed in a dry and
well-ventilated place.
Incompatible materials
Strong bases. Strong oxidizing agents. Strong acids. Acids. Reducing agent.
Section 8: EXPOSURE CONTROLS/PERSONAL PROTECTION
Control parameters
Exposure Limits
If S* appears in the OEL table, it indicates this chemical contains a skin notation.
Chemical Name ACGIH TLV OSHA PEL NIOSH IDLH
Dibenzoyl peroxide
94-36-0
TWA: 5 mg/m
3
TWA: 5 mg/m
3
IDLH: 1500 mg/m
3
TWA: 5 mg/m
3
Appropriate engineering controls
Engineering Controls
Ensure adequate ventilation, especially in confined areas. Provide local exhaust ventilation. In case of insufficient ventilation, wear
suitable respiratory equipment.
Individual protection measures, such as personal protective equipment
Eye/face protection
Tight sealing safety goggles.
Skin and body protection
Wear impervious protective clothing, including boots, gloves, lab coat, apron or coveralls, as appropriate, to prevent skin
contact.
Hand Protection
There is no one glove material or combination of materials that will give unlimited resistance to any individual or combination of
chemicals. Ensure that the breakthrough time of the glove material is not exceeded. Refer to glove supplier for information on
breakthrough time for specific gloves. The instructions and information provided by the glove manufacturer on use, storage,
maintenance and replacement must be followed. Gloves should be replaced regularly and if there is any sign of damage to the
glove material. Always ensure that gloves are free from defects and that they are stored and used correctly. The performance
or effectiveness of the glove may be reduced by physical / chemical damage and poor maintenance. Wear protective gloves.
Respiratory protection
In case of inadequate ventilation wear respiratory protection.
Product Code 27037.01 Page 4 / 8 AGHS – USA OSHA SDS
Thermal Protection
No information available
Section 9: PHYSICAL AND CHEMICAL PROPERTIES
Information on basic physical and chemical properties
Physical state Paste / Solid
Appearance No information available
Odor No information available
Color No information available
Odor Threshold No information available
pH value No information available
Melting point/freezing point No information available
Boiling point / boiling range No information available C / F
flash point 94 C / 201 F
evaporation rate No information available
Flammability (solid, gas) No information available
Flammability Limit in Air
Upper flammability limit: No information available
Lower flammability limit: No information available
Vapor Pressure No information available
vapor density No information available
Density (lbs per US gallon) 10
specific gravity 1.2
Solubility(ies) No information available
Partition coefficient No information available
Autoignition temperature No information available
Decomposition temperature No information available
Kinematic viscosity No information available
Dynamic viscosity No information available
Other information
Section 10: STABILITY AND REACTIVITY
Reactivity No information available.
Chemical stability Stable under normal conditions.
Possibility of Hazardous ReactionsNone under normal processing.
Hazardous polymerization None under normal processing.
Conditions to avoid Heat, flames and sparks.
Incompatible materials Strong bases. Strong oxidizing agents. Strong acids. Acids. Reducing agent.
Hazardous Decomposition ProductsCarbon monoxide. Carbon dioxide (CO2). Oxides of sulfur.
Section 11: TOXICOLOGICAL INFORMATION
Information on likely routes of exposure
Eye contact
Causes serious eye irritation
Skin Contact
May cause an allergic skin reaction
Ingestion
Not applicable
Inhalation
Not applicable
Product Code 27037.01 Page 5 / 8 AGHS – USA OSHA SDS
Numerical measures of toxicity – Component Information
Chemical Name Oral LD50 Dermal LD50 Inhalation LC50
Dibenzoyl peroxide
94-36-0
= 6400 mg/kg ( Rat ) = 7710 mg/kg
( Rat )
– –
Benzoic acid, C9-11-branched alkyl
esters
131298-44-7
> 5000 mg/kg ( Rat ) > 2000 mg/kg ( Rabbit ) = 3.3 mg/L ( Rat ) 4 h
Numerical measures of toxicity – Product Information
UNKNOWN ACUTE TOXICITY 0% of the mixture consists of ingredient(s) of unknown toxicity.
Delayed and immediate effects as well as chronic effects from short and long-term exposure
Skin corrosion/irritation Not applicable
Serious eye damage/eye irritation Causes serious eye irritation
Skin sensitization May cause an allergic skin reaction
Respiratory sensitization Not applicable
Germ cell mutagenicity Not applicable
Carcinogenicity Not applicable
Reproductive Toxicity Not applicable
Specific target organ toxicity (single exposure) Not applicable
Specific target organ toxicity (repeated exposure) Not applicable
Aspiration hazard Not applicable
Section 12: ECOLOGICAL INFORMATION
Ecotoxicity
Environmental precautions Prevent product from entering drains.
Marine pollutant This material meets the definition of a marine pollutant
Persistence and degradability
No information available
Bioaccumulation
No information available
Mobility
No information available
Other adverse effects No information available
Section 13: DISPOSAL CONSIDERATIONS
Waste treatment methods
Disposal of wastes Disposal should be in accordance with applicable regional, national and local laws and
regulations.
Contaminated packaging Improper disposal or reuse of this container may be dangerous and illegal. Empty
containers must be scrapped or reconditioned.
Section 14: TRANSPORT INFORMATION
DOT IMDG IATA
14.1 UN/ID no UN3108 UN3108 UN3108
14.2 Proper shipping name ORGANIC PEROXIDE TYPE E,
SOLID
ORGANIC PEROXIDE TYPE E,
SOLID
ORGANIC PEROXIDE TYPE E,
SOLID
Product Code 27037.01 Page 6 / 8 AGHS – USA OSHA SDS
14.5 Environmental hazard
Marine pollutant This material meets the definition of a marine pollutant
Marine pollutant Dibenzoyl peroxide , Zinc stearate
14.7 Transport in bulk according to Annex II of MARPOL 73/78 and the IBC Code No information available
The supplier may apply one of the following exceptions: Combustible Liquid (49 CFR 173.150(f)); Consumer Commodity (49 CFR 173.150(c),
ICAO/IATA SP A112); Limited Quantity (49 CFR 173.150(b), ICAO Part 3 Chapter 4, IATA 2.7, IMDG Chapter 3.4); Viscous Liquid (49 CFR
173.121(b), IMDG 2.3.2.2, IATA 3.3.3.1.1, ICAO 3.2.2, ADR 2.2.3.1.5); Does Not Sustain Combustion (49 CFR 173.120(a), IATA 3.3.1.3, ICAO
3.1.3, IMDG 2.3.1.3, ADR 2.2.3.1.1 Note 1); or others as allowed under hazardous materials/dangerous goods regulations.
Section 15: REGULATORY INFORMATION
International Inventories
TSCA – United States Toxic Substances Control Act Section 8(b) Inventory All components are listed or exempt
from listing.
DSL – Canadian Domestic Substances List All components are listed or exempt
from listing
US Federal Regulations
Chemical Name SARA 313 – Threshold Values
%
Metals Hazardous air pollutants
(HAPs) content
Dibenzoyl peroxide
94-36-0
25 – 50
1
Zinc stearate
557-05-1
3 – 5
1 Zinc
SARA 311/312 Hazard Categories
Acute health hazard Yes
Chronic Health Hazard Yes
Fire hazard No
Sudden release of pressure hazard No
Reactive Hazard Yes
US State Regulations
Rule 66 status of product
Not photochemically reactive.
U.S. EPA Label information
EPA Pesticide registration numberNot applicable
U.S. State Right-to-Know Regulations
Chemical Name
Dibenzoyl peroxide
94-36-0
.
Proprietary Non-Hazardous Ingredient – Proprietary CAS .
Benzoic acid, C9-11-branched alkyl esters .
14.3 Hazard Class 5.2 5.2 5.2
14.4 Packing Group
14.6 Special Provisions A20, A802
Emergency Response Guide
Number
145
122, 274
EmS-No
F-J, S-R
Product Code 27037.01 Page 7 / 8 AGHS – USA OSHA SDS
131298-44-7
Proprietary Non-Hazardous Ingredient – Proprietary CAS .
Zinc stearate
557-05-1
.
Calcium sulfate
7778-18-9
.
Section 16: OTHER INFORMATION
HMIS
Health hazards 2
Flammability 1
Physical hazards 1
Personal Protection X
Prepared By Product Stewardship
Revision date 18-Apr-2018
Revision Note No information available
Disclaimer
The information on this Safety Data Sheet (SDS) is based on the present state of our knowledge, current national
legislation and guidelines. As the specific conditions of use of the product are outside the supplier’s knowledge and
control the user is responsible for ensuring that the requirements of relevant legislation are complied with. This SDS
should not be construed as any guarantee of the technical performance or suitability for particular applications. UNLESS
SUPPLIER AGREES OTHERWISE IN WRITING, SUPPLIER MAKES NO WARRANTIES, EXPRESS OR IMPLIED, AND
DISCLAIMS ALL IMPLIED WARRANTIES INCLUDING WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR USE OR FREEDOM FROM PATENT INFRINGEMENT. SUPPLIER WILL NOT BE LIABLE FOR ANY SPECIAL,
INCIDENTAL OR CONSEQUENTIAL DAMAGES.
End of Safety Data Sheet
Product Code 27037.01 Page 8 / 8 AGHS – USA OSHA SDS
by | Sep 27, 2025
Safety Data Sheet
according to the OSHA Hazard Communication Standard
SikaBiresin AP017 (Formerly P 17) Part A
Revision Date 03/21/2024
Print Date 03/21/2024
1 / 13
SECTION 1. IDENTIFICATION
Product name :
SikaBiresin AP017 (Formerly P 17) Part A
Company name : Sika Corporation
201 Polito Avenue
Lyndhurst, NJ 07071
USA
www.sikausa.com
Telephone :
(201) 933-8800
Telefax : (201) 804-1076
E-mail address : ehs
@sika-corp.com
Emergency telephone : CHEMTREC: 800-424-9300
INTERNATIONAL: +1-703-527-3887
Recommended use of the
chemical and restrictions on
use
: For further information, refer to product data sheet.
SECTION 2. HAZARDS IDENTIFICATION
GHS classification in accordance with the OSHA Hazard Communication Standard (29 CFR
1910.1200)
Flammable liquids
: Category 3
Skin irritation
: Category 2
Eye irritation
: Category 2A
Carcinogenicity (Inhalation)
: Category 1A
GHS label elements
Hazard pictograms
:
Signal Word
: Danger
Hazard Statements
: H226 Flammable liquid and vapor.
H315 Causes skin irritation.
H319 Causes serious eye irritation.
H350 May cause cancer by inhalation.
Safety Data Sheet
according to the OSHA Hazard Communication Standard
SikaBiresin AP017 (Formerly P 17) Part A
Revision Date 03/21/2024
Print Date 03/21/2024
2 / 13
Precautionary Statements
:
Prevention:
P201 Obtain special instructions before use.
P202 Do not handle until all safety precautions have been read
and understood.
P210 Keep away from heat/ sparks/ open flames/ hot surfaces.
No smoking.
P233 Keep container tightly closed.
P240 Ground/bond container and receiving equipment.
P241 Use explosion-proof electrical/ ventilating/ lighting/ equip-
ment.
P242 Use only non-sparking tools.
P243 Take precautionary measures against static discharge.
P264 Wash skin thoroughly after handling.
P280 Wear protective gloves/ protective clothing/ eye protection/
face protection.
Response:
P303 + P361 + P353 IF ON SKIN (or hair): Take off immediately
all contaminated clothing. Rinse skin with water/ shower.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water
for several minutes. Remove contact lenses, if present and easy
to do. Continue rinsing.
P308 + P313 IF exposed or concerned: Get medical advice/
attention.
P332 + P313 If skin irritation occurs: Get medical advice/ atten-
tion.
P337 + P313 If eye irritation persists: Get medical advice/ atten-
tion.
P362 + P364 Take off contaminated clothing and wash it before
reuse.
P370 + P378 In case of fire: Use dry sand, dry chemical or alco-
hol-resistant foam to extinguish.
Storage:
P403 + P235 Store in a well-ventilated place. Keep cool.
P405 Store locked up.
Disposal:
P501 Dispose of contents/ container to an approved waste dis-
posal plant.
Additional Labeling
There are no ingredients with unknown acute toxicity used in a mixture at a concentration >= 1%.
Other hazards
None known.
Safety Data Sheet
according to the OSHA Hazard Communication Standard
SikaBiresin AP017 (Formerly P 17) Part A
Revision Date 03/21/2024
Print Date 03/21/2024
3 / 13
SECTION 3. COMPOSITION/INFORMATION ON INGREDIENTS
Mixtures
Components
Chemical name CAS-No. Classification Concentra-
tion (% w/w)
Talc 14807-96-6 >= 50 – < 70
vinyltoluene 25013-15-4 Flam. Liq. 3; H226
Acute Tox. 4; H332
Skin Irrit. 2; H315
Eye Irrit. 2A; H319
Asp. Tox. 1; H304
>= 10 – < 20
barium sulfate 7727-43-7 >= 1 – < 5
Quartz (SiO2) >5 m 14808-60-7 Carc. 1A; H350
STOT RE 1; H372
STOT SE 3; H335
>= 0.1 – < 1
Actual concentration is withheld as a trade secret
SECTION 4. FIRST AID MEASURES
General advice : Move out of dangerous area.
Consult a physician.
Show this material safety data sheet to the doctor in attend-
ance.
If inhaled : Move to fresh air.
Consult a physician after significant exposure.
In case of skin contact : Take off contaminated clothing and shoes immediately.
Wash off with soap and plenty of water.
If symptoms persist, call a physician.
In case of eye contact : Immediately flush eye(s) with plenty of water.
Remove contact lenses.
Keep eye wide open while rinsing.
If eye irritation persists, consult a specialist.
If swallowed : Clean mouth with water and drink afterwards plenty of water.
Do not induce vomiting without medical advice.
Do not give milk or alcoholic beverages.
Never give anything by mouth to an unconscious person.
Obtain medical attention.
Most important symptoms
and effects, both acute and
delayed
: Causes skin irritation.
Causes serious eye irritation.
May cause cancer by inhalation.
irritant effects
Excessive lachrymation
Er
ythema
Safety Data Sheet
according to the OSHA Hazard Communication Standard
SikaBiresin AP017 (Formerly P 17) Part A
Revision Date 03/21/2024
Print Date 03/21/2024
4 / 13
Dermatitis
Notes to physician : Treat symptomatically.
SECTION 5. FIRE-FIGHTING MEASURES
Suitable extinguishing media : Alcohol-resistant foam
Carbon dioxide (CO2)
Dry chemical
Unsuitable extinguishing
media
: Water
Further information : Use water spray to cool unopened containers.
Collect contaminated fire extinguishing water separately. This
must not be discharged into drains.
Fire residues and contaminated fire extinguishing water must
be disposed of in accordance with local regulations.
Special protective equipment
for fire-fighters
: In the event of fire, wear self-contained breathing apparatus.
SECTION 6. ACCIDENTAL RELEASE MEASURES
Personal precautions, protec-
tive equipment and emer-
gency procedures
: Use personal protective equipment.
Remove all sources of ignition.
Deny access to unprotected persons.
Beware of vapors accumulating to form explosive concentra-
tions. Vapors can accumulate in low areas.
Environmental precautions
: Prevent product from entering drains.
If the product contaminates rivers and lakes or drains inform
respective authorities.
Local authorities should be advised if significant spillages
cannot be contained.
Methods and materials for
containment and cleaning up
: Soak up with inert absorbent material (e.g. sand, silica gel,
acid binder, universal binder, sawdust).
SECTION 7. HANDLING AND STORAGE
Advice on protection against
fire and explosion
: Use explosion-proof equipment.
Keep away from heat/ sparks/ open flames/ hot surfaces. No
smoking.
Take precautionary measures against electrostatic discharg-
es.
Advice on safe handling : Do not breathe vapors or spray mist.
Avoid exceeding the given occupational exposure limits (see
section 8
).
Safety Data Sheet
according to the OSHA Hazard Communication Standard
SikaBiresin AP017 (Formerly P 17) Part A
Revision Date 03/21/2024
Print Date 03/21/2024
5 / 13
Do not get in eyes, on skin, or on clothing.
For personal protection see section 8.
Smoking, eating and drinking should be prohibited in the ap-
plication area.
Take precautionary measures against static discharge.
Open drum carefully as content may be under pressure.
Take necessary action to avoid static electricity discharge
(which might cause ignition of organic vapors).
Follow standard hygiene measures when handling chemical
products.
Conditions for safe storage : Store in original container.
Keep in a well-ventilated place.
Observe label precautions.
Store in accordance with local regulations.
Materials to avoid : Explosives
Oxidizing agents
Poisonous gases
Poisonous liquids
SECTION 8. EXPOSURE CONTRO LS/PERSONAL PROTECTION
Ingredients with workplace control parameters
Components CAS-No. Value type
(Form of
exposure)
Control parame-
ters / Permissible
concentration
Basis
Talc 14807-96-6 TWA (Dust) 20 Million parti-
cles per cubic foot
OSHA Z-3
TWA (respir-
able dust
fraction
)
2 mg/m3 OSHA P0
TWA (Res-
pirable par-
ticulate mat-
ter
)
2 mg/m3 ACGIH
PEL (respir-
able)
0.05 mg/m3 OSHA CARC
vinyltoluene 25013-15-4 TW A 10 ppm ACGIH
TWA 100 ppm
480 mg/m3
OSHA Z-1
TWA 100 ppm
480 mg/m3
OSHA P0
barium sulfate 7727-43-7 TWA (Inhal-
able particu-
late matter)
5 mg/m3 ACGIH
TWA (total
dust)
15 mg/m3 OSHA Z-1
TWA (respir- 5 mg/m3 OSHA Z-1
Safety Data Sheet
according to the OSHA Hazard Communication Standard
SikaBiresin AP017 (Formerly P 17) Part A
Revision Date 03/21/2024
Print Date 03/21/2024
6 / 13
able fraction)
TWA (Total
dust)
10 mg/m3 OSHA P0
TWA (respir-
able dust
fraction)
5 mg/m3 OSHA P0
Quartz (SiO2) >5 m 14808-60-7 TWA (Res-
pirable par-
ticulate mat-
ter
)
0.025 mg/m3 ACGIH
TWA (Res-
pirable dust)
0.05 mg/m3 OSHA Z-1
TWA (respir-
able)
10 mg/m3 /
%SiO2+2
OSHA Z-3
TWA (respir-
able)
250 mppcf /
%SiO2+5
OSHA Z-3
TWA (respir-
able dust
fraction)
0.1 mg/m3 OSHA P0
TWA (Res-
pirable par-
ticulate mat-
ter
)
0.025 mg/m3
(Silica)
ACGIH
PEL (respir-
able)
0.05 mg/m3 OSHA CARC
TWA (respir-
able dust
fraction
)
0.1 mg/m3 OSHA P0
TWA (Res-
pirable par-
ticulate mat-
ter)
0.025 mg/m3 ACGIH
TWA (Res-
pirable par-
ticulate mat-
ter)
0.025 mg/m3
(Silica)
ACGIH
The above constituents are the only constituents of the product which have a PEL, TLV or other rec-
ommended exposure limit. At this time, the other constituents have no known exposure limits.
Engineering measures : Use of adequate ventilation should be sufficient to control
worker exposure to airborne contaminants. If the use of this
product generates dust, fumes, gas, vapor or mist, use pro-
cess enclosures, local exhaust ventilation or other engineer-
ing controls to keep worker exposure below any recommend-
ed or statutory limits.
The engineering controls also need to keep gas, vapor or
dust concentrations below an
y lower explosive limits.
Personal protective equipment
Respiratory protection : Use a properly fitted NIOSH approved air-purifying or air-fed
Safety Data Sheet
according to the OSHA Hazard Communication Standard
SikaBiresin AP017 (Formerly P 17) Part A
Revision Date 03/21/2024
Print Date 03/21/2024
7 / 13
respirator complying with an approved standard if a risk as-
sessment indicates this is necessary.
The filter class for the respirator must be suitable for the max-
imum expected contaminant concentration
(gas/vapor/aerosol/particulates) that may arise when han-
dling the product. If this concentration is exceeded, self-
contained breathing apparatus must be used.
Hand protection : Chemical-resistant, impervious gloves complying with an
approved standard should be worn at all times when handling
chemical products if a risk assessment indicates this is nec-
essary.
Eye protection : Safety eyewear complying with an approved standard should
be used when a risk assessment indicates this is necessary.
Skin and body protection : Choose body protection in relation to its type, to the concen-
tration and amount of dangerous substances, and to the spe-
cific work-place.
Hygiene measures : Avoid contact with skin, eyes and clothing.
Wash hands before breaks and immediately after handling
the product.
Remove respiratory and skin/eye protection only after vapors
have been cleared from the area.
Remove contaminated clothing and protective equipment
before entering eating areas.
Wash thoroughly after handling.
SECTION 9. PHYSICAL AND CHEMICAL PROPERTIES
Appearance : paste
Color : various
Odor : pungent
Odor Threshold : No data available
pH : Not applicable
Melting point/range / Freezing
point
: No data available
Boiling point/boiling range
: 338 F / 170 C
Flash point : ca. 127 F / 53 C
(Method: closed cup)
Evaporation rate : No data available
Safety Data Sheet
according to the OSHA Hazard Communication Standard
SikaBiresin AP017 (Formerly P 17) Part A
Revision Date 03/21/2024
Print Date 03/21/2024
8 / 13
Flammability (solid, gas)
: No data available
Upper explosion limit / Upper
flammability limit
: No data available
Lower explosion limit / Lower
flammability limit
: No data available
Vapor pressure : 2 hpa
Relative vapor density : No data available
Density : 1.59 – 2.13 g/cm3 (68 F / 20 C)
Solubility(ies)
Water solubility : soluble
Solubility in other solvents : No data available
Partition coefficient: n-
octanol/water
: No data available
Autoignition temperature : No data available
Decomposition temperature : No data available
Viscosity
Viscosity, dynamic : No data available
Viscosity, kinematic : > 20.5 mm2/s (104 F / 40 C)
Explosive properties : No data available
Oxidizing properties : No data available
Volatile organic compounds
(VOC) content
: 8 g/l
Part A + Valspar Cream Hardener BPO Part B Combined.
8 g/l
Part A + AP017 Reducer Part A + Valspar Cream Hardener
BPO Part B Combined.
SECTION 10. STABILITY AND REACTIVITY
Reactivity : No dangerous reaction known under conditions of normal use.
Chemical stability : The product is chemically stable.
Possibility of hazardous reac-
tions
: Stable under recommended storage conditions.
Vapors may form explosive mixture with air.
Conditions to avoid : Heat, flames and sparks.
Safety Data Sheet
according to the OSHA Hazard Communication Standard
SikaBiresin AP017 (Formerly P 17) Part A
Revision Date 03/21/2024
Print Date 03/21/2024
9 / 13
Incompatible materials : No data available
Hazardous decomposition
products
: No decomposition if stored and applied as directed.
SECTION 11. TOXICOLOGICAL INFORMATION
Not classified due to lack of data.
Skin corrosion/irritation
Causes skin irritation.
Serious eye damage/eye irritation
Causes serious eye irritation.
Respiratory or skin sensitization
Skin sensitization
Not classified due to lack of data.
Respiratory sensitization
Not classified due to lack of data.
Germ cell mutagenicity
Not classified due to lack of data.
Carcinogenicity
May cause cancer by inhalation.
IARC Group 1: Carcinogenic to humans
Quartz (SiO2) 14808-60-7
(Silica dust, crystalline)
Group 2B: Possibly carcinogenic to humans
Titanium dioxide (> 10 m) 13463-67-7
OSHA OSHA specifically regulated carcinogen
Talc (Mg3H2(SiO3)4) 14807-96-6
(crystalline silica)
OSHA specifically regulated carcinogen
Quartz (SiO2) 14808-60-7
(crystalline silica)
NTP Known to be human carcinogen
Quartz (SiO2) 14808-60-7
(Silica, Crystalline (Respirable Size))
Reproductive toxicity
Not classified due to lack of data.
STOT-single exposure
Not classified due to lack of data.
Safety Data Sheet
according to the OSHA Hazard Communication Standard
SikaBiresin AP017 (Formerly P 17) Part A
Revision Date 03/21/2024
Print Date 03/21/2024
10 / 13
STOT-repeated exposure
Not classified due to lack of data.
Aspiration toxicity
Not classified due to lack of data.
Further information
Product:
Remarks : Titanium dioxide (13463-67-7)
In lifetime inhalation studies of rats, airborne respirable-size
titanium dioxide particles have shown to cause an increase in
lung tumors at concentrations associated with substantial
particle lung burdens and consequential pulmonary overload
and inflammation. The potential for these adverse health ef-
fects appears to be closely related to the particle size and the
amount of the exposed surface area that comes into contact
with the lung. However, tests with other laboratory animals
such as mice and hamsters, indicate that rats are significantly
more susceptible to the pulmonary overload and inflammation
that causes lung cancer. Epidemiological studies do not sug-
gest an increased risk of cancer in humans from occupational
exposure to titanium dioxide. Titanium dioxide has been char-
acterized by IARC as possibly carcinogenic to humans (Group
2B) through inhalation (not ingestion). It has not been charac-
terized as a potential carcino
gen by either NTP or OSHA.
Quartz (14808-60-7): This classification is relevant when ex-
posed to Quartz (silicon dioxide) in dust or powder form only,
including cured product that is subject to sanding, grinding,
cutting, or other surface preparation activities.
SECTION 12. ECOLOGICAL INFORMATION
Ecotoxicity
No data available
Persistence and degradability
No data available
Bioaccumulative potential
No data available
Mobility in soil
No data available
Other adverse effects
Product:
Additional ecological infor-
mation
: Do not empty into drains; dispose of this material and its con-
tainer in a safe way.
Avoid dispersal of spilled material and runoff and contact with
Safety Data Sheet
according to the OSHA Hazard Communication Standard
SikaBiresin AP017 (Formerly P 17) Part A
Revision Date 03/21/2024
Print Date 03/21/2024
11 / 13
soil, waterways, drains and sewers.
SECTION 13. DISPOSAL CONSIDERATIONS
Disposal methods
Waste from residues : Disposal of this product, solutions and any by-products should
at all times comply with the requirements of environmental
protection and waste disposal legislation and any regional
local authority requirements.
Contaminated packaging : Empty containers should be taken to an approved waste han-
dling site for recycling or disposal.
SECTION 14. TRANSPORT INFORMATION
International Regulations
IATA-DGR
UN/ID No. : UN 1866
Proper shipping name : Resin solution
Class : 3
Packing group : III
Labels : Flammable Liquids
Packing instruction (cargo
aircraft
)
: 366
Packing instruction (passen-
ger aircraft)
: 355
IMDG-Code
UN number : UN 1866
Proper shipping name : RESIN SOLUTION
Class : 3
Packing group : III
Labels : 3
EmS Code : F-E, S-E
Marine pollutant : no
Domestic regulation
49 CFR
UN/ID/NA number : UN 1866
Proper shipping name : Resin solution
Class : 3
Packing group : III
Labels : FLAMMABLE LIQUID
ERG Code : 127
Marine pollutant : no
DOT: As per 49CFR 173.150 (f) Combustible Liquid Exception, Material is Not Regulated.
IMDG: For Limited Quantity special provisions reference IMDG Code Chapter 3.4
Safety Data Sheet
according to the OSHA Hazard Communication Standard
SikaBiresin AP017 (Formerly P 17) Part A
Revision Date 03/21/2024
Print Date 03/21/2024
12 / 13
Special precautions for user
The transport classification(s) provided herein are for informational purposes only, and solely based
upon the properties of the unpackaged material as it is described within this Safety Data Sheet.
Transportation classifications may vary by mode of transportation, package sizes, and variations in
regional or country regulations.
SECTION 15. REGULATORY INFORMATION
TSCA list : All chemical substances in this product are either listed as ac-
tive on the TSCA Inventory or are in compliance with a TSCA
Inventory exemption.
No substances are subject to a Significant New Use Rule.
The following substance(s) is/are subject to TSCA 12(b) export notification requirements:
vinyltoluene 25013-15-4
CERCLA Reportable Quantity
Listed substances in the product are at low enough levels to not be expected to exceed the RQ
SARA 304 Extremely Hazardous Substances Reportable Quantity
Listed substances in the product are at low enough levels to not be expected to exceed the RQ
SARA 302 Extremely Hazardous Substances Threshold Planning Quantity
This material does not contain any components with a section 302 EHS TPQ.
SARA 311/312 Hazards
: Flammable (gases, aerosols, liquids, or solids)
Carcinogenicity
Skin corrosion or irritation
Serious eye damage or eye irritation
SARA 313
: This material does not contain any chemical components with
known CAS numbers that exceed the threshold (De Minimis)
reporting levels established by SARA Title III, Section 313.
Clean Air Act
This product does not contain any hazardous air pollutants (HAP), as defined by the U.S. Clean Air
Act Section 112 (40 CFR 61).
California Prop. 65
WARNING: This product can expose you to chemicals including Talc, which is known to the State of
California to cause cancer, and methanol, which is known to the State of California to cause birth
defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
SECTION 16. OTHER INFORMATION
Full text of other abbreviations
ACGIH : USA. ACGIH Threshold Limit Values (TLV)
Safety Data Sheet
according to the OSHA Hazard Communication Standard
SikaBiresin AP017 (Formerly P 17) Part A
Revision Date 03/21/2024
Print Date 03/21/2024
13 / 13
OSHA CARC : OSHA Specifically Regulated Chemicals/Carcinogens
OSHA P0 : USA. Table Z-1-A Limits for Air Contaminants (1989 vacated
values)
OSHA Z-1 : USA. Occupational Exposure Limits (OSHA) – Table Z-1 Lim-
its for Air Contaminants
OSHA Z-3 : USA. Occupational Exposure Limits (OSHA) – Table Z-3 Min-
eral Dusts
ACGIH / TWA : 8-hour, time-weighted average
OSHA CARC / PEL : Permissible exposure limit (PEL)
OSHA P0 / TWA : 8-hour time weighted average
OSHA Z-1 / TWA : 8-hour time weighted average
OSHA Z-3 / TWA : 8-hour time weighted average
Notes to Reader
The information contained in this Safety Data Sheet applies only to the actual Sika Corporation
(“Sika”) product identified and described herein. This information is not intended to address, nor
does it address the use or application of the identified Sika product in combination with any other
material, product or process. All of the information set forth herein is based on technical data re-
garding the identified product that Sika believes to be reliable as of the date hereof. Prior to each
use of any Sika product, the user must always read and follow the warnings and instructions on
the product’s current Product Data Sheet, product label and Safety Data Sheet for each Sika
product, which are available at web site and/or telephone number listed in Section 1 of this SDS.
SIKA MAKES NO WARRANTIES EXPRESS OR IMPLIED AND ASSUMES NO LIABILITY
ARISING FROM THIS INFORMATION OR ITS USE. SIKA SHALL NOT BE LIABLE UNDER
ANY LEGAL THEORY FOR SPECIAL OR CONS EQUENTIAL DAMAGES AND SHALL NOT BE
RESPONSIBLE FOR THE USE OF THIS PRO DUCT IN A MANNER TO INFRINGE ON ANY
PATENT OR ANY OTHER INTELLECTUAL PR OPERTY RIGHTS HELD BY OTHERS.
All sales of Sika products are subject to its current terms and conditions of sale available at
www.sikausa.com or 201-933-8800.
Revision Date 03/21/2024
100000056511
US / Z8
by | Sep 27, 2025
Page 1/14
Safety Data Sheet
acc. to OSHA HCS
Printing date 03/19/2019 Reviewed on 03/19/2019
48.1.41
1 Identification
Product identifier
Trade name: P14 Ultra White
Article number:I011011-1
Application of the substance / the mixturePolyester filler
Details of the supplier of the safety data sheetSikaAxson US – EHS Department
Manufacturer/Supplier:
Supplier’s Name: Sika Advanced Resins, US
Headquarters:
30800 Stephenson Hwy
Madison Heights, MI 48071
USA
ehs-us@axson.com
Information department:Product safety department
Emergency telephone number:
During normal opening times: +1 (248) 588-2270
CHEMTREC 24-hour Emergency: +1 (800) 424-9300
* 2 Hazard(s) identification
Classification of the substance or mixture
GHS02 Flame
Flam. Liq. 3 H226 Flammable liquid and vapor.
GHS08 Health hazard
Carc. 2 H351 Suspected of causing cancer.
Repr. 2 H361 Suspected of damaging fertility or the unborn child.
STOT RE 1 H372 Causes damage to the hearing organs through prolonged or repeated exposure.
GHS07
Skin Irrit. 2 H315 Causes skin irritation.
Eye Irrit. 2A H319 Causes serious eye irritation.
Label elements
GHS label elementsThe product is classified and labeled according to the Globally Harmonized System (GHS).
(Contd. on page 2) US
Page 2/14
Safety Data Sheet
acc. to OSHA HCS
Printing date 03/19/2019 Reviewed on 03/19/2019
Trade name: P14 Ultra White
(Contd. of page 1)
48.1.41
Hazard pictograms
GHS02GHS07GHS08
Signal wordDanger
Hazard-determining components of labeling:
Styrene
Hazard statements
Flammable liquid and vapor.
Causes skin irritation.
Causes serious eye irritation.
Suspected of causing cancer.
Suspected of damaging fertility or the unborn child.
Causes damage to the hearing organs through prolonged or repeated exposure.
Precautionary statements
Avoid breathing dust/fume/gas/mist/vapors/spray
Keep away from heat/sparks/open flames/hot surfaces. – No smoking.
Ground/bond container and receiving equipment.
Use explosion-proof electrical/ventilating/lighting/equipment.
Do not breathe dust/fume/gas/mist/vapors/spray.
Wear protective gloves/protective clothing/eye protection/face protection.
If on skin (or hair): Take off immediately all contaminated clothing. Rinse skin with water/shower.
If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do.
Continue rinsing.
Store in a well-ventilated place. Keep cool.
Store locked up.
Dispose of contents/container in accordance with local/regional/national/international regulations.
Classification system:
NFPA ratings (scale 0 – 4)
2
3
0
Health = 2
Fire = 3
Reactivity = 0
HMIS-ratings (scale 0 – 4)
HEALTH
FIRE
REACTIVITY
2
3
0
Health = 2
Fire = 3
Reactivity = 0
Other hazards
Results of PBT and vPvB assessment
PBT:Not applicable.
(Contd. on page 3)
US
Page 3/14
Safety Data Sheet
acc. to OSHA HCS
Printing date 03/19/2019 Reviewed on 03/19/2019
Trade name: P14 Ultra White
(Contd. of page 2)
48.1.41
vPvB:Not applicable.
3 Composition/information on ingredients
Chemical characterization: Mixtures
Description:Mixture of the substances listed below with nonhazardous additions.
Dangerous components:
CAS: 100-42-5
EINECS: 202-851-5
Styrene 10-20%
* 4 First-aid measures
Description of first aid measures
General information:
Immediately remove any clothing soiled by the product.
Symptoms of poisoning may even occur after several hours; therefore medical observation for at least 48 hours
after the accident.
After inhalation:In case of unconsciousness place patient stably in side position for transportation.
After skin contact:Immediately wash with water and soap and rinse thoroughly.
After eye contact:
Rinse opened eye for several minutes under running water. If symptoms persist, consult a doctor.
After swallowing:If symptoms persist consult doctor.
Information for doctor:
Most important symptoms and effects, both acute and delayedNo further relevant information available.
Indication of any immediate medical attention and special treatment needed
No further relevant information available.
* 5 Fire-fighting measures
Extinguishing media
Suitable extinguishing agents:
CO2, extinguishing powder or water spray. Fight larger fires with water spray or alcohol resistant foam.
Special hazards arising from the substance or mixture
During heating or in case of fire poisonous gases are produced.
Advice for firefighters
Protective equipment:
Mouth respiratory protective device.
Wear self-contained respiratory protective device.
Additional information
Dispose of fire debris and contaminated fire fighting water in accordance with official regulations.
US
(Contd. on page 4)
Page 4/14
Safety Data Sheet
acc. to OSHA HCS
Printing date 03/19/2019 Reviewed on 03/19/2019
Trade name: P14 Ultra White
(Contd. of page 3)
48.1.41
* 6 Accidental release measures
Personal precautions, protective equipment and emergency procedures
Mount respiratory protective device.
Wear protective equipment. Keep unprotected persons away.
Environmental precautions:Do not allow to enter sewers/ surface or ground water.
Methods and material for containment and cleaning up:
Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust).
Dispose contaminated material as waste according to item 13.
Ensure adequate ventilation.
Reference to other sections
See Section 7 for information on safe handling.
See Section 8 for information on personal protection equipment.
See Section 13 for disposal information.
Protective Action Criteria for Chemicals
PAC-1:
100-42-5 Styrene 20 ppm
7727-43-7 barium sulphate, natural 15 mg/m
13463-67-7 titanium dioxide 30 mg/m
546-93-0 Magnesite 45 mg/m
65997-17-3 Fibrous Glass 15 mg/m
112945-52-5 Fumed silica – untreated 18 mg/m
64-17-5 ethanol 1,800 ppm
21645-51-2 aluminium hydroxide 8.7 mg/m
7759-02-6 strontium sulphate 30 mg/m
7631-86-9 silicon dioxide, chemically prepared 18 mg/m
112926-00-8 Precipitated silica (Silica-Amorphous) 18 mg/m
108-10-1 4-methylpentan-2-one 75 ppm
14808-60-7 Quartz (SiO2) 0.075 mg/m
142-82-5 heptane 500 ppm
108-44-1 m-toluidine 6 ppm
100-41-4 ethylbenzene 33 ppm
PAC-2:
100-42-5 Styrene 130 ppm
7727-43-7 barium sulphate, natural 170 mg/m
13463-67-7 titanium dioxide 330 mg/m
546-93-0 Magnesite 260 mg/m
65997-17-3 Fibrous Glass 170 mg/m
112945-52-5 Fumed silica – untreated 100 mg/m
(Contd. on page 5)
US
Page 5/14
Safety Data Sheet
acc. to OSHA HCS
Printing date 03/19/2019 Reviewed on 03/19/2019
Trade name: P14 Ultra White
(Contd. of page 4)
48.1.41
64-17-5 ethanol 3300* ppm
21645-51-2 aluminium hydroxide 73 mg/m
7759-02-6 strontium sulphate 330 mg/m
7631-86-9 silicon dioxide, chemically prepared 740 mg/m
112926-00-8 Precipitated silica (Silica-Amorphous) 200 mg/m
108-10-1 4-methylpentan-2-one 500 ppm
14808-60-7 Quartz (SiO2) 33 mg/m
142-82-5 heptane 830 ppm
108-44-1 m-toluidine 8.2 ppm
100-41-4 ethylbenzene 1100* ppm
PAC-3:
100-42-5 Styrene 1100* ppm
7727-43-7 barium sulphate, natural 990 mg/m
13463-67-7 titanium dioxide 2,000 mg/m
546-93-0 Magnesite 1,600 mg/m
65997-17-3 Fibrous Glass 990 mg/m
112945-52-5 Fumed silica – untreated 630 mg/m
64-17-5 ethanol 15000* ppm
21645-51-2 aluminium hydroxide 440 mg/m
7759-02-6 strontium sulphate 2,000 mg/m
7631-86-9 silicon dioxide, chemically prepared 4,500 mg/m
112926-00-8 Precipitated silica (Silica-Amorphous) 1,200 mg/m
108-10-1 4-methylpentan-2-one 3000* ppm
14808-60-7 Quartz (SiO2) 200 mg/m
142-82-5 heptane 5000* ppm
108-44-1 m-toluidine 54 ppm
100-41-4 ethylbenzene 1800* ppm
* 7 Handling and storage
Handling:
Precautions for safe handling
Ensure good ventilation/exhaustion at the workplace.
Open and handle receptacle with care.
Prevent formation of aerosols.
Information about protection against explosions and fires:
Keep ignition sources away – Do not smoke.
Protect against electrostatic charges.
(Contd. on page 6)
US
Page 6/14
Safety Data Sheet
acc. to OSHA HCS
Printing date 03/19/2019 Reviewed on 03/19/2019
Trade name: P14 Ultra White
(Contd. of page 5)
48.1.41
Keep respiratory protective device available.
Conditions for safe storage, including any incompatibilities
Storage:
Requirements to be met by storerooms and receptacles:No special requirements.
Information about storage in one common storage facility:Not required.
Further information about storage conditions:Keep receptacle tightly sealed.
Specific end use(s)No further relevant information available.
* 8 Exposure controls/personal protection
Additional information about design of technical systems:No further data; see item 7.
Control parameters
Components with limit values that require monitoring at the workplace:
100-42-5 Styrene
ACGIH TLV Short-term value: 170 at 40 ppm mg/m
Long-term value: 85 at 20 ppm mg/m
OSHA PEL Long-term value: 100 ppm mg/m
Ceiling limit value: 200 ppm mg/m
PEL Long-term value: 100 ppm
Ceiling limit value: 200; 600* ppm
*5-min peak in any 3 hrs
REL Short-term value: 425 mg/m , 100 ppm
Long-term value: 215 mg/m , 50 ppm
TLV Short-term value: (170) mg/m , (40) ppm
Long-term value: (85) NIC-8.5 mg/m , (20) NIC-2 ppm
BEI, NIC-A3, NIC-OTO
Additional information:The lists that were valid during the creation were used as basis.
Exposure controls
Personal protective equipment:
General protective and hygienic measures:
Keep away from foodstuffs, beverages and feed.
Immediately remove all soiled and contaminated clothing.
Wash hands before breaks and at the end of work.
Store protective clothing separately.
Avoid contact with the eyes and skin.
Breathing equipment:
In case of brief exposure or low pollution use respiratory filter device. In case of intensive or longer exposure use
respiratory protective device that is independent of circulating air.
(Contd. on page 7)
US
Page 7/14
Safety Data Sheet
acc. to OSHA HCS
Printing date 03/19/2019 Reviewed on 03/19/2019
Trade name: P14 Ultra White
(Contd. of page 6)
48.1.41
Protection of hands:
Protective gloves
The glove material has to be impermeable and resistant to the product/ the substance/ the preparation.
Due to missing tests no recommendation to the glove material can be given for the product/ the preparation/ the
chemical mixture.
Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation
Material of gloves
The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and
varies from manufacturer to manufacturer. As the product is a preparation of several substances, the resistance
of the glove material can not be calculated in advance and has therefore to be checked prior to the application.
Penetration time of glove material
The exact break through time has to be found out by the manufacturer of the protective gloves and has to be
observed.
Eye protection:
Tightly sealed goggles
* 9 Physical and chemical properties
Information on basic physical and chemical properties
General Information
Appearance:
Form: Pasty
Color: White
Odor: Pungent
Odor threshold: Not determined.
pH-value: Not determined.
Change in condition
Melting point/Melting range:Undetermined.
Boiling point/Boiling range:145 C (293 F)
Flash point: 31 C (87.8 F)
Flammability (solid, gaseous):Not applicable.
Ignition temperature: 490 C (914 F)
Decomposition temperature: Not determined.
(Contd. on page 8)
US
Page 8/14
Safety Data Sheet
acc. to OSHA HCS
Printing date 03/19/2019 Reviewed on 03/19/2019
Trade name: P14 Ultra White
(Contd. of page 7)
48.1.41
Auto igniting: Product is not selfigniting.
Danger of explosion: Product is not explosive. However, formation of explosive air/vapor
mixtures are possible.
Explosion limits:
Lower: 0.9 Vol %
Upper: 6.8 Vol %
Vapor pressure at 20 C (68 F):6 hPa (4.5 mm Hg)
Density at 20 C (68 F): 2.16 g/cm (18.03 lbs/gal)
Relative density Not determined.
Vapor density Not determined.
Evaporation rate Not determined.
Solubility in / Miscibility with
Water: Not miscible or difficult to mix.
Partition coefficient (n-octanol/water):Not determined.
Viscosity:
Dynamic: Not determined.
Kinematic: Not determined.
Solvent content:
Organic solvents: 0.3 %
VOC content: 14.76 %
319.5 g/l / 2.67 lb/gal
Solids content: 56.4 %
Other information No further relevant information available.
* 10 Stability and reactivity
ReactivityNo further relevant information available.
Chemical stability
Thermal decomposition / conditions to be avoided:No decomposition if used according to specifications.
Possibility of hazardous reactionsNo dangerous reactions known.
Conditions to avoidNo further relevant information available.
Incompatible materials:No further relevant information available.
Hazardous decomposition products:Carbon monoxide and carbon dioxide
US
(Contd. on page 9)
Page 9/14
Safety Data Sheet
acc. to OSHA HCS
Printing date 03/19/2019 Reviewed on 03/19/2019
Trade name: P14 Ultra White
(Contd. of page 8)
48.1.41
* 11 Toxicological information
Information on toxicological effects
Acute toxicity:
LD/LC50 values that are relevant for classification:
100-42-5 Styrene
Oral LD50 >2,000 mg/kg (rat)
Dermal LD50 >2,000 mg/kg (rat)
Inhalative LC50/4 h 11.8 mg/l (rat)
Primary irritant effect:
on the skin:Irritant to skin and mucous membranes.
on the eye:Irritating effect.
Sensitization:No sensitizing effects known.
Additional toxicological information:
The product shows the following dangers according to internally approved calculation methods for preparations:
Irritant
Carcinogenic categories
IARC (International Agency for Research on Cancer)
14807-96-6 Talc (Mg3H2(SiO3)4) 3
100-42-5 Styrene 2B
13463-67-7 titanium dioxide 2B
64-17-5 ethanol 1
7631-86-9 silicon dioxide, chemically prepared 3
112926-00-8 Precipitated silica (Silica-Amorphous) 3
108-10-1 4-methylpentan-2-one 2B
14808-60-7 Quartz (SiO2) 1
100-41-4 ethylbenzene 2B
NTP (National Toxicology Program)
14808-60-7 Quartz (SiO2) K
OSHA-Ca (Occupational Safety & Health Administration)
None of the ingredients is listed.
* 12 Ecological information
Toxicity
Aquatic toxicity:No further relevant information available.
Persistence and degradabilityNo further relevant information available.
Behavior in environmental systems:
Bioaccumulative potentialNo further relevant information available.
(Contd. on page 10)
US
Page 10/14
Safety Data Sheet
acc. to OSHA HCS
Printing date 03/19/2019 Reviewed on 03/19/2019
Trade name: P14 Ultra White
(Contd. of page 9)
48.1.41
Mobility in soilNo further relevant information available.
Additional ecological information:
General notes:
Water hazard class 2 (Self-assessment): hazardous for water
Do not allow product to reach ground water, water course or sewage system.
Danger to drinking water if even small quantities leak into the ground.
Results of PBT and vPvB assessment
PBT:Not applicable.
vPvB:Not applicable.
Other adverse effectsNo further relevant information available.
13 Disposal considerations
Waste treatment methods
Recommendation:
Must not be disposed of together with household garbage. Do not allow product to reach sewage system.
Uncleaned packagings:
Recommendation:Disposal must be made according to official regulations.
* 14 Transport information
UN-Number
DOT, IMDG, IATA UN1866
UN proper shipping name
DOT Resin solution
IMDG, IATA RESIN SOLUTION
Transport hazard class(es)
DOT
Class 3 Flammable liquids
Label 3
IMDG, IATA
Class 3 Flammable liquids
(Contd. on page 11)
US
Page 11/14
Safety Data Sheet
acc. to OSHA HCS
Printing date 03/19/2019 Reviewed on 03/19/2019
Trade name: P14 Ultra White
(Contd. of page 10)
48.1.41
Label 3
Packing group
DOT, IMDG, IATA III
Environmental hazards:
Marine pollutant: No
Special precautions for user Warning: Flammable liquids
EMS Number: F-E,S-E
Stowage Category A
Transport in bulk according to Annex II of
MARPOL73/78 and the IBC Code Not applicable.
UN “Model Regulation”: UN 1866 RESIN SOLUTION, 3, III
* 15 Regulatory information
Safety, health and environmental regulations/legislation specific for the substance or mixture
Sara
Section 355 (extremely hazardous substances):
None of the ingredients is listed.
Section 313 (Specific toxic chemical listings):
100-42-5 Styrene
TSCA (Toxic Substances Control Act): (Substances not listed)
All ingredients are listed.
Chemicals regulated by TSCA Section 12(b)
None of the ingredients is listed.
Chemical regulated by TSCA 5(a)(2)rule:
None of the ingredients is listed.
Hazardous Air Pollutants
100-42-5 Styrene
108-10-1 4-methylpentan-2-one
100-41-4 ethylbenzene
Proposition 65
Chemicals known to cause cancer:
100-42-5 Styrene
13463-67-7 titanium dioxide
108-10-1 4-methylpentan-2-one
14808-60-7 Quartz (SiO2)
(Contd. on page 12)
US
Page 12/14
Safety Data Sheet
acc. to OSHA HCS
Printing date 03/19/2019 Reviewed on 03/19/2019
Trade name: P14 Ultra White
(Contd. of page 11)
48.1.41
100-41-4 ethylbenzene
Chemicals known to cause reproductive toxicity for females:
None of the ingredients is listed.
Chemicals known to cause reproductive toxicity for males:
None of the ingredients is listed.
Chemicals known to cause developmental toxicity:
64-17-5 ethanol
108-10-1 4-methylpentan-2-one
Carcinogenic categories
EPA (Environmental Protection Agency)
7727-43-7 barium sulphate, natural D, CBD(inh), NL(oral)
108-10-1 4-methylpentan-2-one I
142-82-5 heptane D
100-41-4 ethylbenzene D
TLV (Threshold Limit Value established by ACGIH)
14807-96-6 Talc (Mg3H2(SiO3)4) A4
13463-67-7 titanium dioxide A4
64-17-5 ethanol A3
14808-60-7 Quartz (SiO2) A2
108-44-1 m-toluidine A4
100-41-4 ethylbenzene A3
NIOSH-Ca (National Institute for Occupational Safety and Health)
13463-67-7 titanium dioxide
14808-60-7 Quartz (SiO2)
Listed in CWC Regulations
None of the ingredients is listed.
GHS label elementsThe product is classified and labeled according to the Globally Harmonized System (GHS).
Hazard pictograms
GHS02GHS07GHS08
Signal wordDanger
Hazard-determining components of labeling:
Styrene
(Contd. on page 13)
US
Page 13/14
Safety Data Sheet
acc. to OSHA HCS
Printing date 03/19/2019 Reviewed on 03/19/2019
Trade name: P14 Ultra White
(Contd. of page 12)
48.1.41
Hazard statements
Flammable liquid and vapor.
Causes skin irritation.
Causes serious eye irritation.
Suspected of causing cancer.
Suspected of damaging fertility or the unborn child.
Causes damage to the hearing organs through prolonged or repeated exposure.
Precautionary statements
Keep away from heat/sparks/open flames/hot surfaces. – No smoking.
Ground/bond container and receiving equipment.
Use explosion-proof electrical/ventilating/lighting/equipment.
Do not breathe dust/fume/gas/mist/vapors/spray.
Wear protective gloves/protective clothing/eye protection/face protection.
If on skin (or hair): Take off immediately all contaminated clothing. Rinse skin with water/shower.
If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do.
Continue rinsing.
Store in a well-ventilated place. Keep cool.
Store locked up.
Dispose of contents/container in accordance with local/regional/national/international regulations.
Chemical safety assessment:A Chemical Safety Assessment has not been carried out.
16 Other information
This information is based on our present knowledge. However, this shall not constitute a guarantee for any
specific product features and shall not establish a legally valid contractual relationship.
Date of preparation / last revision03/19/2019 / 11
Abbreviations and acronyms:
IMDG: International Maritime Code for Dangerous Goods
DOT: US Department of Transportation
IATA: International Air Transport Association
ACGIH: American Conference of Governmental Industrial Hygienists
EINECS: European Inventory of Existing Commercial Chemical Substances
ELINCS: European List of Notified Chemical Substances
CAS: Chemical Abstracts Service (division of the American Chemical Society)
NFPA: National Fire Protection Association (USA)
HMIS: Hazardous Materials Identification System (USA)
VOC: Volatile Organic Compounds (USA, EU)
LC50: Lethal concentration, 50 percent
LD50: Lethal dose, 50 percent
PBT: Persistent, Bioaccumulative and Toxic
vPvB: very Persistent and very Bioaccumulative
NIOSH: National Institute for Occupational Safety
OSHA: Occupational Safety & Health
TLV: Threshold Limit Value
PEL: Permissible Exposure Limit
REL: Recommended Exposure Limit
Flam. Liq. 3: Flammable liquids Category 3
Skin Irrit. 2: Skin corrosion/irritation Category 2
Eye Irrit. 2A: Serious eye damage/eye irritation Category 2A
Carc. 2: Carcinogenicity Category 2
(Contd. on page 14)
US
Page 14/14
Safety Data Sheet
acc. to OSHA HCS
Printing date 03/19/2019 Reviewed on 03/19/2019
Trade name: P14 Ultra White
(Contd. of page 13)
48.1.41
Repr. 2: Reproductive toxicity Category 2
STOT RE 1: Specific target organ toxicity (repeated exposure) Category 1
* Data compared to the previous version altered. US
by | Sep 27, 2025
by | Sep 27, 2025
Safety Data Sheet
according to the OSHA Hazard Communication Standard
SikaBiresin AP017 (Formerly P 17) Part A
Revision Date 03/21/2024
Print Date 03/21/2024
1 / 13
SECTION 1. IDENTIFICATION
Product name :
SikaBiresin AP017 (Formerly P 17) Part A
Company name : Sika Corporation
201 Polito Avenue
Lyndhurst, NJ 07071
USA
www.sikausa.com
Telephone :
(201) 933-8800
Telefax : (201) 804-1076
E-mail address : ehs
@sika-corp.com
Emergency telephone : CHEMTREC: 800-424-9300
INTERNATIONAL: +1-703-527-3887
Recommended use of the
chemical and restrictions on
use
: For further information, refer to product data sheet.
SECTION 2. HAZARDS IDENTIFICATION
GHS classification in accordance with the OSHA Hazard Communication Standard (29 CFR
1910.1200)
Flammable liquids
: Category 3
Skin irritation
: Category 2
Eye irritation
: Category 2A
Carcinogenicity (Inhalation)
: Category 1A
GHS label elements
Hazard pictograms
:
Signal Word
: Danger
Hazard Statements
: H226 Flammable liquid and vapor.
H315 Causes skin irritation.
H319 Causes serious eye irritation.
H350 May cause cancer by inhalation.
Safety Data Sheet
according to the OSHA Hazard Communication Standard
SikaBiresin AP017 (Formerly P 17) Part A
Revision Date 03/21/2024
Print Date 03/21/2024
2 / 13
Precautionary Statements
:
Prevention:
P201 Obtain special instructions before use.
P202 Do not handle until all safety precautions have been read
and understood.
P210 Keep away from heat/ sparks/ open flames/ hot surfaces.
No smoking.
P233 Keep container tightly closed.
P240 Ground/bond container and receiving equipment.
P241 Use explosion-proof electrical/ ventilating/ lighting/ equip-
ment.
P242 Use only non-sparking tools.
P243 Take precautionary measures against static discharge.
P264 Wash skin thoroughly after handling.
P280 Wear protective gloves/ protective clothing/ eye protection/
face protection.
Response:
P303 + P361 + P353 IF ON SKIN (or hair): Take off immediately
all contaminated clothing. Rinse skin with water/ shower.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water
for several minutes. Remove contact lenses, if present and easy
to do. Continue rinsing.
P308 + P313 IF exposed or concerned: Get medical advice/
attention.
P332 + P313 If skin irritation occurs: Get medical advice/ atten-
tion.
P337 + P313 If eye irritation persists: Get medical advice/ atten-
tion.
P362 + P364 Take off contaminated clothing and wash it before
reuse.
P370 + P378 In case of fire: Use dry sand, dry chemical or alco-
hol-resistant foam to extinguish.
Storage:
P403 + P235 Store in a well-ventilated place. Keep cool.
P405 Store locked up.
Disposal:
P501 Dispose of contents/ container to an approved waste dis-
posal plant.
Additional Labeling
There are no ingredients with unknown acute toxicity used in a mixture at a concentration >= 1%.
Other hazards
None known.
Safety Data Sheet
according to the OSHA Hazard Communication Standard
SikaBiresin AP017 (Formerly P 17) Part A
Revision Date 03/21/2024
Print Date 03/21/2024
3 / 13
SECTION 3. COMPOSITION/INFORMATION ON INGREDIENTS
Mixtures
Components
Chemical name CAS-No. Classification Concentra-
tion (% w/w)
Talc 14807-96-6 >= 50 – < 70
vinyltoluene 25013-15-4 Flam. Liq. 3; H226
Acute Tox. 4; H332
Skin Irrit. 2; H315
Eye Irrit. 2A; H319
Asp. Tox. 1; H304
>= 10 – < 20
barium sulfate 7727-43-7 >= 1 – < 5
Quartz (SiO2) >5 m 14808-60-7 Carc. 1A; H350
STOT RE 1; H372
STOT SE 3; H335
>= 0.1 – < 1
Actual concentration is withheld as a trade secret
SECTION 4. FIRST AID MEASURES
General advice : Move out of dangerous area.
Consult a physician.
Show this material safety data sheet to the doctor in attend-
ance.
If inhaled : Move to fresh air.
Consult a physician after significant exposure.
In case of skin contact : Take off contaminated clothing and shoes immediately.
Wash off with soap and plenty of water.
If symptoms persist, call a physician.
In case of eye contact : Immediately flush eye(s) with plenty of water.
Remove contact lenses.
Keep eye wide open while rinsing.
If eye irritation persists, consult a specialist.
If swallowed : Clean mouth with water and drink afterwards plenty of water.
Do not induce vomiting without medical advice.
Do not give milk or alcoholic beverages.
Never give anything by mouth to an unconscious person.
Obtain medical attention.
Most important symptoms
and effects, both acute and
delayed
: Causes skin irritation.
Causes serious eye irritation.
May cause cancer by inhalation.
irritant effects
Excessive lachrymation
Er
ythema
Safety Data Sheet
according to the OSHA Hazard Communication Standard
SikaBiresin AP017 (Formerly P 17) Part A
Revision Date 03/21/2024
Print Date 03/21/2024
4 / 13
Dermatitis
Notes to physician : Treat symptomatically.
SECTION 5. FIRE-FIGHTING MEASURES
Suitable extinguishing media : Alcohol-resistant foam
Carbon dioxide (CO2)
Dry chemical
Unsuitable extinguishing
media
: Water
Further information : Use water spray to cool unopened containers.
Collect contaminated fire extinguishing water separately. This
must not be discharged into drains.
Fire residues and contaminated fire extinguishing water must
be disposed of in accordance with local regulations.
Special protective equipment
for fire-fighters
: In the event of fire, wear self-contained breathing apparatus.
SECTION 6. ACCIDENTAL RELEASE MEASURES
Personal precautions, protec-
tive equipment and emer-
gency procedures
: Use personal protective equipment.
Remove all sources of ignition.
Deny access to unprotected persons.
Beware of vapors accumulating to form explosive concentra-
tions. Vapors can accumulate in low areas.
Environmental precautions
: Prevent product from entering drains.
If the product contaminates rivers and lakes or drains inform
respective authorities.
Local authorities should be advised if significant spillages
cannot be contained.
Methods and materials for
containment and cleaning up
: Soak up with inert absorbent material (e.g. sand, silica gel,
acid binder, universal binder, sawdust).
SECTION 7. HANDLING AND STORAGE
Advice on protection against
fire and explosion
: Use explosion-proof equipment.
Keep away from heat/ sparks/ open flames/ hot surfaces. No
smoking.
Take precautionary measures against electrostatic discharg-
es.
Advice on safe handling : Do not breathe vapors or spray mist.
Avoid exceeding the given occupational exposure limits (see
section 8
).
Safety Data Sheet
according to the OSHA Hazard Communication Standard
SikaBiresin AP017 (Formerly P 17) Part A
Revision Date 03/21/2024
Print Date 03/21/2024
5 / 13
Do not get in eyes, on skin, or on clothing.
For personal protection see section 8.
Smoking, eating and drinking should be prohibited in the ap-
plication area.
Take precautionary measures against static discharge.
Open drum carefully as content may be under pressure.
Take necessary action to avoid static electricity discharge
(which might cause ignition of organic vapors).
Follow standard hygiene measures when handling chemical
products.
Conditions for safe storage : Store in original container.
Keep in a well-ventilated place.
Observe label precautions.
Store in accordance with local regulations.
Materials to avoid : Explosives
Oxidizing agents
Poisonous gases
Poisonous liquids
SECTION 8. EXPOSURE CONTRO LS/PERSONAL PROTECTION
Ingredients with workplace control parameters
Components CAS-No. Value type
(Form of
exposure)
Control parame-
ters / Permissible
concentration
Basis
Talc 14807-96-6 TWA (Dust) 20 Million parti-
cles per cubic foot
OSHA Z-3
TWA (respir-
able dust
fraction
)
2 mg/m3 OSHA P0
TWA (Res-
pirable par-
ticulate mat-
ter
)
2 mg/m3 ACGIH
PEL (respir-
able)
0.05 mg/m3 OSHA CARC
vinyltoluene 25013-15-4 TW A 10 ppm ACGIH
TWA 100 ppm
480 mg/m3
OSHA Z-1
TWA 100 ppm
480 mg/m3
OSHA P0
barium sulfate 7727-43-7 TWA (Inhal-
able particu-
late matter)
5 mg/m3 ACGIH
TWA (total
dust)
15 mg/m3 OSHA Z-1
TWA (respir- 5 mg/m3 OSHA Z-1
Safety Data Sheet
according to the OSHA Hazard Communication Standard
SikaBiresin AP017 (Formerly P 17) Part A
Revision Date 03/21/2024
Print Date 03/21/2024
6 / 13
able fraction)
TWA (Total
dust)
10 mg/m3 OSHA P0
TWA (respir-
able dust
fraction)
5 mg/m3 OSHA P0
Quartz (SiO2) >5 m 14808-60-7 TWA (Res-
pirable par-
ticulate mat-
ter
)
0.025 mg/m3 ACGIH
TWA (Res-
pirable dust)
0.05 mg/m3 OSHA Z-1
TWA (respir-
able)
10 mg/m3 /
%SiO2+2
OSHA Z-3
TWA (respir-
able)
250 mppcf /
%SiO2+5
OSHA Z-3
TWA (respir-
able dust
fraction)
0.1 mg/m3 OSHA P0
TWA (Res-
pirable par-
ticulate mat-
ter
)
0.025 mg/m3
(Silica)
ACGIH
PEL (respir-
able)
0.05 mg/m3 OSHA CARC
TWA (respir-
able dust
fraction
)
0.1 mg/m3 OSHA P0
TWA (Res-
pirable par-
ticulate mat-
ter)
0.025 mg/m3 ACGIH
TWA (Res-
pirable par-
ticulate mat-
ter)
0.025 mg/m3
(Silica)
ACGIH
The above constituents are the only constituents of the product which have a PEL, TLV or other rec-
ommended exposure limit. At this time, the other constituents have no known exposure limits.
Engineering measures : Use of adequate ventilation should be sufficient to control
worker exposure to airborne contaminants. If the use of this
product generates dust, fumes, gas, vapor or mist, use pro-
cess enclosures, local exhaust ventilation or other engineer-
ing controls to keep worker exposure below any recommend-
ed or statutory limits.
The engineering controls also need to keep gas, vapor or
dust concentrations below an
y lower explosive limits.
Personal protective equipment
Respiratory protection : Use a properly fitted NIOSH approved air-purifying or air-fed
Safety Data Sheet
according to the OSHA Hazard Communication Standard
SikaBiresin AP017 (Formerly P 17) Part A
Revision Date 03/21/2024
Print Date 03/21/2024
7 / 13
respirator complying with an approved standard if a risk as-
sessment indicates this is necessary.
The filter class for the respirator must be suitable for the max-
imum expected contaminant concentration
(gas/vapor/aerosol/particulates) that may arise when han-
dling the product. If this concentration is exceeded, self-
contained breathing apparatus must be used.
Hand protection : Chemical-resistant, impervious gloves complying with an
approved standard should be worn at all times when handling
chemical products if a risk assessment indicates this is nec-
essary.
Eye protection : Safety eyewear complying with an approved standard should
be used when a risk assessment indicates this is necessary.
Skin and body protection : Choose body protection in relation to its type, to the concen-
tration and amount of dangerous substances, and to the spe-
cific work-place.
Hygiene measures : Avoid contact with skin, eyes and clothing.
Wash hands before breaks and immediately after handling
the product.
Remove respiratory and skin/eye protection only after vapors
have been cleared from the area.
Remove contaminated clothing and protective equipment
before entering eating areas.
Wash thoroughly after handling.
SECTION 9. PHYSICAL AND CHEMICAL PROPERTIES
Appearance : paste
Color : various
Odor : pungent
Odor Threshold : No data available
pH : Not applicable
Melting point/range / Freezing
point
: No data available
Boiling point/boiling range
: 338 F / 170 C
Flash point : ca. 127 F / 53 C
(Method: closed cup)
Evaporation rate : No data available
Safety Data Sheet
according to the OSHA Hazard Communication Standard
SikaBiresin AP017 (Formerly P 17) Part A
Revision Date 03/21/2024
Print Date 03/21/2024
8 / 13
Flammability (solid, gas)
: No data available
Upper explosion limit / Upper
flammability limit
: No data available
Lower explosion limit / Lower
flammability limit
: No data available
Vapor pressure : 2 hpa
Relative vapor density : No data available
Density : 1.59 – 2.13 g/cm3 (68 F / 20 C)
Solubility(ies)
Water solubility : soluble
Solubility in other solvents : No data available
Partition coefficient: n-
octanol/water
: No data available
Autoignition temperature : No data available
Decomposition temperature : No data available
Viscosity
Viscosity, dynamic : No data available
Viscosity, kinematic : > 20.5 mm2/s (104 F / 40 C)
Explosive properties : No data available
Oxidizing properties : No data available
Volatile organic compounds
(VOC) content
: 8 g/l
Part A + Valspar Cream Hardener BPO Part B Combined.
8 g/l
Part A + AP017 Reducer Part A + Valspar Cream Hardener
BPO Part B Combined.
SECTION 10. STABILITY AND REACTIVITY
Reactivity : No dangerous reaction known under conditions of normal use.
Chemical stability : The product is chemically stable.
Possibility of hazardous reac-
tions
: Stable under recommended storage conditions.
Vapors may form explosive mixture with air.
Conditions to avoid : Heat, flames and sparks.
Safety Data Sheet
according to the OSHA Hazard Communication Standard
SikaBiresin AP017 (Formerly P 17) Part A
Revision Date 03/21/2024
Print Date 03/21/2024
9 / 13
Incompatible materials : No data available
Hazardous decomposition
products
: No decomposition if stored and applied as directed.
SECTION 11. TOXICOLOGICAL INFORMATION
Not classified due to lack of data.
Skin corrosion/irritation
Causes skin irritation.
Serious eye damage/eye irritation
Causes serious eye irritation.
Respiratory or skin sensitization
Skin sensitization
Not classified due to lack of data.
Respiratory sensitization
Not classified due to lack of data.
Germ cell mutagenicity
Not classified due to lack of data.
Carcinogenicity
May cause cancer by inhalation.
IARC Group 1: Carcinogenic to humans
Quartz (SiO2) 14808-60-7
(Silica dust, crystalline)
Group 2B: Possibly carcinogenic to humans
Titanium dioxide (> 10 m) 13463-67-7
OSHA OSHA specifically regulated carcinogen
Talc (Mg3H2(SiO3)4) 14807-96-6
(crystalline silica)
OSHA specifically regulated carcinogen
Quartz (SiO2) 14808-60-7
(crystalline silica)
NTP Known to be human carcinogen
Quartz (SiO2) 14808-60-7
(Silica, Crystalline (Respirable Size))
Reproductive toxicity
Not classified due to lack of data.
STOT-single exposure
Not classified due to lack of data.
Safety Data Sheet
according to the OSHA Hazard Communication Standard
SikaBiresin AP017 (Formerly P 17) Part A
Revision Date 03/21/2024
Print Date 03/21/2024
10 / 13
STOT-repeated exposure
Not classified due to lack of data.
Aspiration toxicity
Not classified due to lack of data.
Further information
Product:
Remarks : Titanium dioxide (13463-67-7)
In lifetime inhalation studies of rats, airborne respirable-size
titanium dioxide particles have shown to cause an increase in
lung tumors at concentrations associated with substantial
particle lung burdens and consequential pulmonary overload
and inflammation. The potential for these adverse health ef-
fects appears to be closely related to the particle size and the
amount of the exposed surface area that comes into contact
with the lung. However, tests with other laboratory animals
such as mice and hamsters, indicate that rats are significantly
more susceptible to the pulmonary overload and inflammation
that causes lung cancer. Epidemiological studies do not sug-
gest an increased risk of cancer in humans from occupational
exposure to titanium dioxide. Titanium dioxide has been char-
acterized by IARC as possibly carcinogenic to humans (Group
2B) through inhalation (not ingestion). It has not been charac-
terized as a potential carcino
gen by either NTP or OSHA.
Quartz (14808-60-7): This classification is relevant when ex-
posed to Quartz (silicon dioxide) in dust or powder form only,
including cured product that is subject to sanding, grinding,
cutting, or other surface preparation activities.
SECTION 12. ECOLOGICAL INFORMATION
Ecotoxicity
No data available
Persistence and degradability
No data available
Bioaccumulative potential
No data available
Mobility in soil
No data available
Other adverse effects
Product:
Additional ecological infor-
mation
: Do not empty into drains; dispose of this material and its con-
tainer in a safe way.
Avoid dispersal of spilled material and runoff and contact with
Safety Data Sheet
according to the OSHA Hazard Communication Standard
SikaBiresin AP017 (Formerly P 17) Part A
Revision Date 03/21/2024
Print Date 03/21/2024
11 / 13
soil, waterways, drains and sewers.
SECTION 13. DISPOSAL CONSIDERATIONS
Disposal methods
Waste from residues : Disposal of this product, solutions and any by-products should
at all times comply with the requirements of environmental
protection and waste disposal legislation and any regional
local authority requirements.
Contaminated packaging : Empty containers should be taken to an approved waste han-
dling site for recycling or disposal.
SECTION 14. TRANSPORT INFORMATION
International Regulations
IATA-DGR
UN/ID No. : UN 1866
Proper shipping name : Resin solution
Class : 3
Packing group : III
Labels : Flammable Liquids
Packing instruction (cargo
aircraft
)
: 366
Packing instruction (passen-
ger aircraft)
: 355
IMDG-Code
UN number : UN 1866
Proper shipping name : RESIN SOLUTION
Class : 3
Packing group : III
Labels : 3
EmS Code : F-E, S-E
Marine pollutant : no
Domestic regulation
49 CFR
UN/ID/NA number : UN 1866
Proper shipping name : Resin solution
Class : 3
Packing group : III
Labels : FLAMMABLE LIQUID
ERG Code : 127
Marine pollutant : no
DOT: As per 49CFR 173.150 (f) Combustible Liquid Exception, Material is Not Regulated.
IMDG: For Limited Quantity special provisions reference IMDG Code Chapter 3.4
Safety Data Sheet
according to the OSHA Hazard Communication Standard
SikaBiresin AP017 (Formerly P 17) Part A
Revision Date 03/21/2024
Print Date 03/21/2024
12 / 13
Special precautions for user
The transport classification(s) provided herein are for informational purposes only, and solely based
upon the properties of the unpackaged material as it is described within this Safety Data Sheet.
Transportation classifications may vary by mode of transportation, package sizes, and variations in
regional or country regulations.
SECTION 15. REGULATORY INFORMATION
TSCA list : All chemical substances in this product are either listed as ac-
tive on the TSCA Inventory or are in compliance with a TSCA
Inventory exemption.
No substances are subject to a Significant New Use Rule.
The following substance(s) is/are subject to TSCA 12(b) export notification requirements:
vinyltoluene 25013-15-4
CERCLA Reportable Quantity
Listed substances in the product are at low enough levels to not be expected to exceed the RQ
SARA 304 Extremely Hazardous Substances Reportable Quantity
Listed substances in the product are at low enough levels to not be expected to exceed the RQ
SARA 302 Extremely Hazardous Substances Threshold Planning Quantity
This material does not contain any components with a section 302 EHS TPQ.
SARA 311/312 Hazards
: Flammable (gases, aerosols, liquids, or solids)
Carcinogenicity
Skin corrosion or irritation
Serious eye damage or eye irritation
SARA 313
: This material does not contain any chemical components with
known CAS numbers that exceed the threshold (De Minimis)
reporting levels established by SARA Title III, Section 313.
Clean Air Act
This product does not contain any hazardous air pollutants (HAP), as defined by the U.S. Clean Air
Act Section 112 (40 CFR 61).
California Prop. 65
WARNING: This product can expose you to chemicals including Talc, which is known to the State of
California to cause cancer, and methanol, which is known to the State of California to cause birth
defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
SECTION 16. OTHER INFORMATION
Full text of other abbreviations
ACGIH : USA. ACGIH Threshold Limit Values (TLV)
Safety Data Sheet
according to the OSHA Hazard Communication Standard
SikaBiresin AP017 (Formerly P 17) Part A
Revision Date 03/21/2024
Print Date 03/21/2024
13 / 13
OSHA CARC : OSHA Specifically Regulated Chemicals/Carcinogens
OSHA P0 : USA. Table Z-1-A Limits for Air Contaminants (1989 vacated
values)
OSHA Z-1 : USA. Occupational Exposure Limits (OSHA) – Table Z-1 Lim-
its for Air Contaminants
OSHA Z-3 : USA. Occupational Exposure Limits (OSHA) – Table Z-3 Min-
eral Dusts
ACGIH / TWA : 8-hour, time-weighted average
OSHA CARC / PEL : Permissible exposure limit (PEL)
OSHA P0 / TWA : 8-hour time weighted average
OSHA Z-1 / TWA : 8-hour time weighted average
OSHA Z-3 / TWA : 8-hour time weighted average
Notes to Reader
The information contained in this Safety Data Sheet applies only to the actual Sika Corporation
(“Sika”) product identified and described herein. This information is not intended to address, nor
does it address the use or application of the identified Sika product in combination with any other
material, product or process. All of the information set forth herein is based on technical data re-
garding the identified product that Sika believes to be reliable as of the date hereof. Prior to each
use of any Sika product, the user must always read and follow the warnings and instructions on
the product’s current Product Data Sheet, product label and Safety Data Sheet for each Sika
product, which are available at web site and/or telephone number listed in Section 1 of this SDS.
SIKA MAKES NO WARRANTIES EXPRESS OR IMPLIED AND ASSUMES NO LIABILITY
ARISING FROM THIS INFORMATION OR ITS USE. SIKA SHALL NOT BE LIABLE UNDER
ANY LEGAL THEORY FOR SPECIAL OR CONS EQUENTIAL DAMAGES AND SHALL NOT BE
RESPONSIBLE FOR THE USE OF THIS PRO DUCT IN A MANNER TO INFRINGE ON ANY
PATENT OR ANY OTHER INTELLECTUAL PR OPERTY RIGHTS HELD BY OTHERS.
All sales of Sika products are subject to its current terms and conditions of sale available at
www.sikausa.com or 201-933-8800.
Revision Date 03/21/2024
100000056511
US / Z8
