by | Sep 27, 2025
LR_2OO WHITE
Flevision : 06 / 2t / 201,9
lSafetv Data Sheet _.
Sectlon 1 : ldentification
Product Name: LR-200 WHITE
ldentification: Epoxy Resin Blend
Manufacturer: Resin Services lnc.
5959 18 % Mile Road
Sterling Heights Ml 483’14 USA
P h ( 5ti6
)2 54 -67 7 0 F ax(586)-254 -6947
* * :tt’250 “C)
Density: 12.3 Viscosity: medium liquid
Specific Gravity (H2O=1, at 4 “C): L.48 %Volatile O %
Evaporation Rate: N/AV
Section 1Cl – Stability and Reactivity
Stability: Stable at room temperature in clo:;ed cr:ntainers under normalstorage and handling conditions.
Polymerization: Hazardous polymerization c:anncrt occur.
Chemical Incompatibilities: STRONG LEWIS OR IVIINERAL ACIDS AND STRONG MINERAL AND ORGANTC
BASE/ESPECTALLY PRtMARy AND SECONDARy ALtpHATtC AMtNES.
Conditions to Avoid: AVOID HEAT, FLAME AND CICNTACT WITH STRONG OXIDIZING AGEN.T.
Hazardous Decomposition Products: Thermal oxidative decomposition can produce CARBON MONOXIDE,
ALDEHYDES AND ACIDS MAY BE FORMED DURING COMBUSTION.
6lPage
LR-2OO WHITE
Revision: 06/21/2019
Section 11 – Toxicological Information
Likely routes of exposure: Eye Contact, Skin contact, Ingestion
symptoms related to the physical, chemical and toxir:ological characteristics:
Ingestion: This material has a low potential for toxic efferct due to ingestion.
Skin Contact: Prolonged or widespread skin contact is not likely to cause toxic effects.
lrritation:
Skin: Skin contact has caused allergic skin reactions in certain sensitized individuals
Eyes: May cause slight temporary eye irritation with locerl redness Mechanical irritation possible due to solid filler materrars
Inhalation: May cause allergic respiratory response upon exposure to healed vapors
Delayed and immediate effects and also chronic effercts from short and long term exposure:
Carcinogen: This material contains no known or suspected carcinogens in levels above O 1%
Mutagen: This material contains no known or suspected mutagens in levels above O 1%
Reproductive Hazard: This material contains no materiills known or suspected to cause reproductive hazards rn levels above O 1%
Numerical measures of toxicity:
This finished product has not been tested to determine individual toxicological/ecological limits. Individual components of this mixture
have been independently tested by the raw material manufacturers The results for the individual components may not be
representative of the toxicity of this finished product.
Section 12 – Ecological lnformation
Ecotoxicity: Diglycidyl Ether of Bisphenol-A (DGEBA) resins (44% formula mass) are toxic to aquatic organisms (1C50/1C50
between 1 and 10 mg/L in most sensitive species) However, DGEBA is insoluble in water under most conditions Individual
components of this mixture have been independently tested by the raw material suppliers and any known information has been
presented above The results for the individual components may not be representative of the ecological toxicity of this flnished product
Caution should be taken to prevent release to the environment See Section 13 for furlher information
Persistence and degradability: This material contains components that show little or no evidence of biodegradability Caution should
be taken to prevent release to the environment. See Section 13 forfurther information
Degradation: Based on the stringent OECD test guidelinc.s, this material cannot be considered as readily biodegradable; however,
these results do not necessarily mean that he material is not biodegradable under environmental conditions,
Bioaccumulative potential: N/A
Mobility in soil: N/A
Other adverse effects: N/A
7lPage
LR-2OO WHITE
Revision: 06/27 /2019
Section 13 .- Disposat Considerations
Disposal methods:
Preferred method of disposal includes incineration under controlled conditions in accordance with all localano
national laws and regulations. The generation o1’waste should be avoided or minimized where possible, Untreated
material is not suitable for disposal. Waste, even small quantities, should never be poured down drains, sewers or
watercourses. Waste must be disposed of in accordance with federal, state and localenvironmentalcontrol
regulations, This material, when properly mixed and cured with its hardener component at the proper mix ratio,
may be safely landfilled.
Contaminated packaging: Empty containers can only be disposed of when the remaining product adhering to the
container walls has been removed. Hazard warning labels should be removed from container onlv after it ha:; oeen
properly emptied.
Section 1’4 – Transport Information
D.O.T. AIR/ROAD/RAIL ICAO/IATA I{IR TRANSPoRT IMDG SEA TRANSPoRT
TRANSPORT(49CFR)
UN NUMBER: NON-REGULATED UN NUMETER: NON’REGULATED UN NUMBER: NON-REGULATED
Proper Shipping Name: Proper Shipping Name: Proper Shipping Name:
NON-REGUTATID NON REGLILATED NON-REGULATED
Transport Hazard Class: Transport Flazard Class: Transport Hazard Class:
NON-REGULATED NON-REGULATED NON-REGULATED
Packing Group: Packing Group: Packing Group:
NON-REGULATED NON-REGLII.ATED NON-REGULATED
8lPage
LR-2OO WHITE
Revision: 06/27 /2019
$ection 15 – Regulatory Information
EPA Regulations:
RCRA Hazardous Waste Number: Not listed (40 CFR 26I.33)
RCRA Hazardous Waste Classification (a0 CFR 26L.): Not classified
CERCLA Hazardous Substance (40 CFR 302.41listed/unlisted specific per RCRA, Sec, 3OO1; CWA, Sec, 311(bXa);CWA,
Sec. 307(a), CAA, Sec. 112
CERCLA Reportable Quantity: NA
SARA 311/312 Codes:
SARA Toxic Chemical (40 CFR 372.65): Not listed
SARA EHS (Extremely Hazardous Substance)(40 CFR 355): Not listed, Threshold Planning Quantity (Tpe)
OSHA Regulations:
Air Contaminant (29 CFR 1910.1000, Table Z-1., Z-1.-A: Not listed
OSHA Specifically Regulated Substance (29CFR 1910)
Section 16 – Other information
Company policy or disclaimer- This information is furnished without warranty, representation, inducement
or license of any kind, except that it is accurate to the best of Resin Services Inc’s knowledge, or obtained from
sources believed by Resin Services Inc. to be accurate, and Resin Services Inc, does not assume any legal
responsibility for use or reliance upon same. Customers are encouraged to conduct their own tests. Before using any
product, read its label.
9lPage
by | Sep 27, 2025
EPOXY HARDENER
Safety Data Sheet 80LM-3YB
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
Revision date: 10/11/2021 Version: 1.0
10/11/2021EN (English US)SDS ID: 80LM-3YBPage 1
SECTION 1: Identification
1.1. Identification
Product form :MixtureTrade name :EPOXY HARDENER CAS-No. :MixtureProduct code :80LM-3YB
1.2. Recommended use and restrictions on use
Use of the substance/mixture :Laminating Hardener
1.3. Supplier
Dura Technologies, Inc.
2720 South Willow Avenue #A
Bloomington, CA 92316
909-546-1162
ChemTrec US: 800.424.9300
ChemTrec Int: +1 70 3527 3887
1.4. Emergency telephone number
Emergency number :ChemTrec US: 800.424.9300 Int: +1 70 3527 3887
SECTION 2: Hazard(s) identification
2.1. Classification of the substance or mixture
GHS US classification
Acute toxicity (oral)
Category 4
H302 Harmful if swallowedAcute toxicity (dermal)
Category 4
H312 Harmful in contact with skinSkin corrosion/irritation
Category 1B
H314 Causes severe skin burns and eye damageSerious eye damage/eye
irritation Category 1
H318 Causes serious eye damageSkin sensitization, category
1A
H317 May cause an allergic skin reactionHazardous to the aquatic
environment – Acute
Hazard Category 3
H402 Harmful to aquatic lifeHazardous to the aquatic
environment – Chronic
Hazard Category 2
H411 Toxic to aquatic life with long lasting effects
Full text of H statements : see section 16
2.2. GHS Label elements, including precautionary statements
GHS US labeling
Hazard pictograms (GHS US) :Signal word (GHS US) :DangerHazard statements (GHS US) :H302+H312 – Harmful if swallowed or in contact with skin
H314 – Causes severe skin burns and eye damage
H317 – May cause an allergic skin reaction
H318 – Causes serious eye damage
H402 – Harmful to aquatic life
H411 – Toxic to aquatic life with long lasting effects
Precautionary statements (GHS US) :P260 – Do not breathe dust/fume/gas/mist/vapors/spray.
P261 – Avoid breathing dust/fume/gas/mist/vapors/spray.
P264 – Wash hands, forearms and face thoroughly after handling.
EPOXY HARDENER
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
10/11/2021EN (English US)SDS ID: 80LM-3YB2/11 P270 – Do not eat, drink or smoke when using this product.
P272 – Contaminated work clothing must not be allowed out of the workplace.
P273 – Avoid release to the environment.
P280 – Wear protective clothing.
P301+P312 – If swallowed: Call a poison center or doctor if you feel unwell.
P301+P330+P331 – If swallowed: rinse mouth. Do NOT induce vomiting.
P302+P352 – If on skin: Wash with plenty of water.
P303+P361+P353 – If on skin (or hair): Take off immediately all contaminated clothing. Rinse
skin with water/shower.
P304+P340 – If inhaled: Remove person to fresh air and keep comfortable for breathing.
P305+P351+P338 – IF IN EYES: Rinse cautiously with water for several minutes. Remove
contact lenses, if present and easy to do. Continue rinsing.
P310 – Immediately call a poison center or doctor.
P312 – Call a poison center or doctor if you feel unwell.
P321 – Specific treatment (see supplemental first aid instruction on this label).
P322 – Specific treatment (see supplemental first aid instruction on this label)
P330 – Rinse mouth.
P333+P313 – If skin irritation or rash occurs: Get medical advice/attention.
P362+P364 – Take off contaminated clothing and wash it before reuse.
P363 – Wash contaminated clothing before reuse.
P391 – Collect spillage.
P405 – Store locked up.
P501 – Dispose of contents/container to hazardous or special waste collection point, in
accordance with local, regional, national and/or international regulation.
2.3. Other hazards which do not result in classification
No additional information available
2.4. Unknown acute toxicity (GHS US)
Not applicable
SECTION 3: Composition/Information on ingredients
3.1. Substances
Not applicable
3.2. Mixtures
NameProduct identifier%GHS US classificationtriethylenetetramine(CAS-No.) 112-24-3< 45Acute Tox. 3 (Dermal), H311
Skin Corr. 1B, H314
Skin Sens. 1, H317
Aquatic Acute 3, H402
Aquatic Chronic 3, H412
1,3-bis(aminomethyl)cyclohexane(CAS-No.) 2579-20-6< 25Acute Tox. 4 (Oral), H302
Skin Corr. 1B, H314
Aquatic Acute 3, H402
Aquatic Chronic 3, H412
POLYAMIDE CURING AGENT(CAS-No.) MIXTURE<= 10Skin Corr. 1C, H314
Eye Irrit. 2B, H320
Skin Sens. 1, H317
alpha-hydro-omega(2-aminomethylethoxy)poly(oxy(methyl-
1,2-ethanediyl)ether with 2-ethyl-2-(hydroxymethyl)-1,3-
propanediol (3:1)
(CAS-No.) 39423-51-3< 8Acute Tox. 3 (Oral), H301
Acute Tox. 3 (Dermal), H311
Skin Corr. 1A, H314
benzyl alcohol(CAS-No.) 100-51-6<= 8Acute Tox. 4 (Oral), H302
Acute Tox. 4 (Inhalation), H332
isophorone diamine(CAS-No.) 2855-13-2<= 7Acute Tox. 4 (Oral), H302
Skin Corr. 1, H314
Skin Sens. 1, H317
Aquatic Acute 3, H402
Aquatic Chronic 3, H412
Full text of hazard classes and H-statements : see section 16
SECTION 4: First-aid measures
4.1. Description of first aid measures
First-aid measures general :Never give anything by mouth to an unconscious person. If you feel unwell, seek medical
advice (show the label where possible).
First-aid measures after inhalation :Remove person to fresh air and keep comfortable for breathing. Remove victim to fresh air and
keep at rest in a position comfortable for breathing. Immediately call a poison center or
doctor/physician.
EPOXY HARDENER
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
10/11/2021EN (English US)SDS ID: 80LM-3YB3/11First-aid measures after skin contact :Immediately call a poison center or doctor/physician. Specific measures (see supplemental first
aid instruction on this label). Wash with plenty of soap and water. Wash contaminated clothing
before reuse. Remove/Take off immediately all contaminated clothing. Rinse skin with
water/shower. If skin irritation or rash occurs: Get medical advice/attention. Specific treatment
(see supplemental first aid instruction on this label).
First-aid measures after eye contact :Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to
do. Continue rinsing. Immediately call a poison center or doctor/physician.
First-aid measures after ingestion :Rinse mouth. Do NOT induce vomiting. Call a POISON CENTER or doctor/physician if you feel
unwell. Immediately call a poison center or doctor/physician. Call a poison
center/doctor/physician if you feel unwell.
4.2. Most important symptoms and effects (acute and delayed)
Potential Adverse human health effects and
symptoms
:Harmful if swallowed. Harmful in contact with skin.Symptoms/effects :Causes severe skin burns and eye damage.Symptoms/effects after inhalation :Harmful if inhaled. May cause an allergic skin reaction.Symptoms/effects after skin contact :Caustic burns/corrosion of the skin. Repeated exposure to this material can result in absorption
through skin causing significant health hazard. Harmful in contact with skin.
Symptoms/effects after eye contact :Causes eye irritation. Causes serious eye damage. May cause severe irritation.Symptoms/effects after ingestion :Swallowing a small quantity of this material will result in serious health hazard.
4.3. Immediate medical attention and special treatment, if necessary
Until victim can be cared for by specialized staff:
SECTION 5: Fire-fighting measures
5.1. Suitable (and unsuitable) extinguishing media
Suitable extinguishing media :Sand. Water spray. Dry powder. Foam. Carbon dioxide.Unsuitable extinguishing media :Do not use a heavy water stream.
5.2. Specific hazards arising from the chemical
Fire hazard :Heating increases the fire hazard. Heating may cause a fire. Heating may cause a fire or
explosion. Insufficient data available on direct fire hazard (flashpoint > 100 C). Self-heating in
large quantities; may catch fire. Temperature above flashpoint: higher fire/explosion hazard.
5.3. Special protective equipment and precautions for fire-fighters
Firefighting instructions :Use water spray or fog for cooling exposed containers. Exercise caution when fighting any
chemical fire. Prevent fire-fighting water from entering environment.
Protection during firefighting :Do not enter fire area without proper protective equipment, including respiratory protection. Do
not attempt to take action without suitable protective equipment. Self-contained breathing
apparatus. Complete protective clothing.
SECTION 6: Accidental release measures
6.1. Personal precautions, protective equipment and emergency procedures
6.1.1.For non-emergency personnel
Emergency procedures :Ventilate spillage area. Evacuate unnecessary personnel.
6.1.2.For emergency responders
Protective equipment :Do not attempt to take action without suitable protective equipment. Equip cleanup crew with
proper protection. For further information refer to section 8: “Exposure controls/personal
protection”.
Emergency procedures :Ventilate area.
6.2. Environmental precautions
Avoid release to the environment. Prevent entry to sewers and public waters. Notify authorities if liquid enters sewers or public waters.
6.3. Methods and material for containment and cleaning up
Methods for cleaning up :Take up liquid spill into absorbent material. Soak up spills with inert solids, such as clay or
diatomaceous earth as soon as possible. Collect spillage. Store away from other materials.
Other information :Dispose of materials or solid residues at an authorized site.
6.4. Reference to other sections
See Heading 8. Exposure controls and personal protection. For further information refer to section 13.
EPOXY HARDENER
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
10/11/2021EN (English US)SDS ID: 80LM-3YB4/11
SECTION 7: Handling and storage
7.1. Precautions for safe handling
Precautions for safe handling :Ensure good ventilation of the work station. Wear personal protective equipment. Wash hands
and other exposed areas with mild soap and water before eating, drinking or smoking and
when leaving work. Provide good ventilation in process area to prevent formation of vapor. Do
not breathe dust/fume/gas/mist/vapors/spray. Avoid breathing dust/fume/gas/mist/vapors/spray.
Hygiene measures :Wash hands, forearms and face thoroughly after handling. Wash contaminated clothing before
reuse. Contaminated work clothing should not be allowed out of the workplace. Do not eat,
drink or smoke when using this product. Always wash hands after handling the product.
7.2. Conditions for safe storage, including any incompatibilities
Technical measures :Comply with applicable regulations.Storage conditions :Keep only in the original container in a cool, well ventilated place away from : Keep container
closed when not in use. Store in a well-ventilated place. Keep cool.
Incompatible products :Strong bases. Strong acids.Incompatible materials :Sources of ignition. Direct sunlight.
SECTION 8: Exposure controls/personal protection
8.1. Control parameters
1,3-bis(aminomethyl)cyclohexane (2579-20-6)Not applicable triethylenetetramine (112-24-3)Not applicable alpha-hydro-omega(2-aminomethylethoxy)poly(oxy(methyl-1,2-ethanediyl)ether with 2-ethyl-2-(hydroxymethyl)-1,3-propanediol (3:1)
(39423-51-3)
Not applicable POLYAMIDE CURING AGENT (MIXTURE)Not applicable benzyl alcohol (100-51-6)Not applicable isophorone diamine (2855-13-2)Not applicable
8.2. Appropriate engineering controls
Appropriate engineering controls :Ensure good ventilation of the work station.Environmental exposure controls :Avoid release to the environment.
8.3. Individual protection measures/Personal protective equipment
Personal protective equipment:Avoid all unnecessary exposure.
Hand protection:Wear protective gloves.Eye protection:Chemical goggles or face shield. Safety glassesSkin and body protection:Wear suitable protective clothing
Respiratory protection:Wear appropriate mask
Other information:Do not eat, drink or smoke during use.
EPOXY HARDENER
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
10/11/2021EN (English US)SDS ID: 80LM-3YB5/11
SECTION 9: Physical and chemical properties
9.1. Information on basic physical and chemical properties
Physical state :Liquid
Appearance :light yellow.Color :light yellow
Odor :characteristic
Odor threshold :No data available
pH :No data available
Melting point :Not applicable
Freezing point :No data available
Boiling point :140 – 152 C Initial Boiling Point for Styrene @ 760.00 mm Hg
Flash point :100 C for Volatile Component (230 Deg F)
Relative evaporation rate (butyl acetate=1) :No data available
Relative evaporation rate (ether=1) :< 1 slower than etherFlammability (solid, gas) :Non flammable.
Vapor pressure :< 4 mm Hg
Relative vapor density at 20 C :No data available
Relative density :No data available
Density :8.28Solubility :No data available
Log Pow :No data available
Auto-ignition temperature :No data available
Decomposition temperature :No data available
Viscosity, kinematic :No data availableViscosity, dynamic :No data available
Explosion limits :No data available
Explosive properties :No data available
Oxidizing properties :No data available
9.2. Other information
No additional information available
SECTION 10: Stability and reactivity
10.1.Reactivity
Thermal decomposition generates : Corrosive vapors.
10.2.Chemical stability
Stable under normal conditions. Not established.
10.3.Possibility of hazardous reactions
Not established.
10.4.Conditions to avoid
Direct sunlight. Extremely high or low temperatures.
10.5.Incompatible materials
Strong acids. Strong bases.
10.6.Hazardous decomposition products
fume. Carbon monoxide. Carbon dioxide. Thermal decomposition generates : Corrosive vapors.
SECTION 11: Toxicological information
11.1.Information on toxicological effects
Acute toxicity (oral) :Harmful if swallowed.Acute toxicity (dermal) :Harmful in contact with skin.Acute toxicity (inhalation) :Not classifiedATE US (oral)1058.121 mg/kg body weightATE US (dermal)1318.379 mg/kg body weight
EPOXY HARDENER
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
10/11/2021EN (English US)SDS ID: 80LM-3YB6/111,3-bis(aminomethyl)cyclohexane (2579-20-6)LD50 oral rat880 mg/kg (Rat, Oral)ATE US (oral)880 mg/kg body weighttriethylenetetramine (112-24-3)LD50 oral rat2500 mg/kg (Rat, Literature, Oral)LD50 dermal rabbit805 mg/kg (Rabbit, Literature, Dermal)ATE US (oral)2500 mg/kg body weightATE US (dermal)805 mg/kg body weightalpha-hydro-omega(2-aminomethylethoxy)poly(oxy(methyl-1,2-ethanediyl)ether with 2-ethyl-2-(hydroxymethyl)-1,3-propanediol (3:1)
(39423-51-3)
LD50 oral rat220 mg/kg (Rat)LD50 dermal rabbit401 mg/kg (Rabbit)ATE US (oral)220 mg/kg body weightATE US (dermal)401 mg/kg body weightbenzyl alcohol (100-51-6)LD50 oral rat1620 mg/kg bw/day (Rat, Male, Experimental value, Oral)LD50 dermal rabbit> 2000 mg/kg (Rabbit, Inconclusive, insufficient data, Dermal)LC50 Inhalation – Rat> 4.178 mg/l air (OECD 403: Acute Inhalation Toxicity, 4 h, Rat, Male / female, Experimental
value, Inhalation (aerosol))
ATE US (oral)1620 mg/kg body weightATE US (gases)4500 ppmV/4hATE US (vapors)11 mg/l/4hATE US (dust, mist)1.5 mg/l/4hisophorone diamine (2855-13-2)LD50 oral rat1030 mg/kg (Equivalent or similar to OECD 401, Rat, Male, Experimental value, Oral, 14
day(s))
LD50 dermal rat> 2000 mg/kg body weight (OECD 402: Acute Dermal Toxicity, 24 h, Rat, Male / female,
Experimental value, Dermal, 14 day(s))
LC50 Inhalation – Rat> 5.01 mg/l (OECD 403: Acute Inhalation Toxicity, 4 h, Rat, Male / female, Experimental value,
Inhalation (aerosol), 14 day(s))
ATE US (oral)1030 mg/kg body weightSkin corrosion/irritation :Causes severe skin burns and eye damage.Serious eye damage/irritation :Causes serious eye damage.Respiratory or skin sensitization :May cause an allergic skin reaction.Germ cell mutagenicity :Not classifiedCarcinogenicity :Not classifiedReproductive toxicity :Not classifiedSTOT-single exposure :Not classifiedSTOT-repeated exposure :Not classifiedAspiration hazard :Not classifiedViscosity, kinematic :No data availableLikely routes of exposure :Inhalation.Potential Adverse human health effects and
symptoms
:Harmful if swallowed. Harmful in contact with skin.Symptoms/effects :Causes severe skin burns and eye damage.Symptoms/effects after inhalation :Harmful if inhaled. May cause an allergic skin reaction.Symptoms/effects after skin contact :Caustic burns/corrosion of the skin. Repeated exposure to this material can result in absorption
through skin causing significant health hazard. Harmful in contact with skin.
Symptoms/effects after eye contact :Causes eye irritation. Causes serious eye damage. May cause severe irritation.Symptoms/effects after ingestion :Swallowing a small quantity of this material will result in serious health hazard.
EPOXY HARDENER
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
10/11/2021EN (English US)SDS ID: 80LM-3YB7/11
SECTION 12: Ecological information
12.1.Toxicity
Ecology – general :Dangerous for the environment. Harmful to aquatic life.Ecology – water :Harmful to aquatic life. Toxic to aquatic life with long lasting effects. Harmful to aquatic life with
long lasting effects.
1,3-bis(aminomethyl)cyclohexane (2579-20-6)LC50 fish 1130 mg/l (OECD 203: Fish, Acute Toxicity Test, 96 h, Leuciscus idus, Semi-static system,
Fresh water, Experimental value, GLP)
EC50 Daphnia 165.4 mg/l (OECD 202: Daphnia sp. Acute Immobilisation Test, 48 h, Daphnia magna, Static
system, Fresh water, Experimental value, GLP)
triethylenetetramine (112-24-3)LC50 fish 1495 mg/l (96 h, Pimephales promelas, Fresh water, Literature study)EC50 Daphnia 131.1 mg/l (Equivalent or similar to OECD 202, 48 h, Daphnia magna, Literature study)ErC50 (algae)>= 100 mg/l (DIN 38412-9, 72 h, Scenedesmus subspicatus, Literature study, Growth)benzyl alcohol (100-51-6)LC50 fish 1460 mg/l (EPA OPP 72-1, 96 h, Pimephales promelas, Static system, Fresh water,
Experimental value, Nominal concentration)
EC50 Daphnia 1230 mg/l (OECD 202: Daphnia sp. Acute Immobilisation Test, 48 h, Daphnia magna, Fresh
water, Experimental value, GLP)
ErC50 (algae)770 mg/l (OECD 201: Alga, Growth Inhibition Test, 72 h, Pseudokirchneriella subcapitata,
Static system, Fresh water, Experimental value, GLP)
isophorone diamine (2855-13-2)LC50 fish 1110 mg/l (EU Method C.1, 96 h, Leuciscus idus, Semi-static system, Fresh water,
Experimental value, GLP)
EC50 Daphnia 123 mg/l (OECD 202: Daphnia sp. Acute Immobilisation Test, 48 h, Daphnia magna, Static
system, Fresh water, Experimental value, GLP)
12.2.Persistence and degradability
EPOXY HARDENER (Mixture)Persistence and degradabilityMay cause long-term adverse effects in the environment.1,3-bis(aminomethyl)cyclohexane (2579-20-6)Persistence and degradabilityNot readily biodegradable in water. Biodegradability in soil: no data available. Not established.triethylenetetramine (112-24-3)Persistence and degradabilityNot readily biodegradable in water. No (test)data on mobility of the substance available.
Photodegradation in the air. Not established.
alpha-hydro-omega(2-aminomethylethoxy)poly(oxy(methyl-1,2-ethanediyl)ether with 2-ethyl-2-(hydroxymethyl)-1,3-propanediol (3:1)
(39423-51-3)
Persistence and degradabilityBiodegradability in water: no data available.POLYAMIDE CURING AGENT (MIXTURE)Persistence and degradabilityNot established.benzyl alcohol (100-51-6)Persistence and degradabilityBiodegradable in the soil. Readily biodegradable in water.Biochemical oxygen demand (BOD)
1.6 g O /g substance
Chemical oxygen demand (COD)
2.4 g O /g substance
ThOD
2.5 g O /g substance
isophorone diamine (2855-13-2)Persistence and degradabilityNot readily biodegradable in water.
12.3.Bioaccumulative potential
EPOXY HARDENER (Mixture)Bioaccumulative potentialNot established.1,3-bis(aminomethyl)cyclohexane (2579-20-6)Log Pow0.69 – 0.78 (Experimental value, OECD 107: Partition Coefficient (n-octanol/water): Shake
Flask Method, 21.5 – 24.7 C)
EPOXY HARDENER
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
10/11/2021EN (English US)SDS ID: 80LM-3YB8/11
1,3-bis(aminomethyl)cyclohexane (2579-20-6)
Bioaccumulative potentialLow potential for bioaccumulation (Log Kow < 4). Not established.triethylenetetramine (112-24-3)BCF other aquatic organisms 13.162 (BCFBAF v3.01, Calculated value)Log Pow-2.65 (Estimated value, KOWWIN)Bioaccumulative potentialBioaccumulation: not applicable. Not established.alpha-hydro-omega(2-aminomethylethoxy)poly(oxy(methyl-1,2-ethanediyl)ether with 2-ethyl-2-(hydroxymethyl)-1,3-propanediol (3:1)
(39423-51-3)
Bioaccumulative potentialNo bioaccumulation data available.POLYAMIDE CURING AGENT (MIXTURE)Bioaccumulative potentialNot established.benzyl alcohol (100-51-6)Log Pow1 - 1.1 (Experimental value, 20 C)Bioaccumulative potentialLow potential for bioaccumulation (Log Kow < 4).isophorone diamine (2855-13-2)BCF other aquatic organisms 13.16 (BCFWIN, QSAR)Log Pow0.99 (Experimental value, OECD 107: Partition Coefficient (n-octanol/water): Shake Flask
Method, 23 C)
Bioaccumulative potentialLow potential for bioaccumulation (Log Kow < 4).
12.4.Mobility in soil
1,3-bis(aminomethyl)cyclohexane (2579-20-6)Log Koc1.473 (log Koc, Calculated value)triethylenetetramine (112-24-3)Log Koc1.885 (log Koc, SRC PCKOCWIN v2.0, Calculated value)Ecology - soilHighly mobile in soil.benzyl alcohol (100-51-6)Surface tension39 mN/m (20 C)Ecology - soilNo (test)data on mobility of the substance available.isophorone diamine (2855-13-2)Surface tension3.47 N/m (23 C)Log Koc2.97 (log Koc, QSAR)Ecology - soilLow potential for adsorption in soil.
12.5.Other adverse effects
Other information :Avoid release to the environment.
SECTION 13: Disposal considerations
13.1.Disposal methods
Regional legislation (waste) :Disposal must be done according to official regulations.Waste treatment methods :Dispose of contents/container in accordance with licensed collector s sorting instructions.Product/Packaging disposal recommendations :Dispose in a safe manner in accordance with local/national regulations. Dispose of
contents/container to hazardous or special waste collection point, in accordance with local,
regional, national and/or international regulation.
Ecology - waste materials :Avoid release to the environment.
SECTION 14: Transport information
Department of Transportation (DOT)
In accordance with DOTTransport document description :UN2735 Polyamines, liquid, corrosive, n.o.s. (CYCLOALIPATHIC AMINES,
TRIETHYLENETETRAMINE), 8, II
EPOXY HARDENER
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
10/11/2021EN (English US)SDS ID: 80LM-3YB9/11UN-No.(DOT) :UN2735 Proper Shipping Name (DOT) :Polyamines, liquid, corrosive, n.o.s.
CYCLOALIPATHIC AMINES, TRIETHYLENETETRAMINE
Class (DOT) :8 - Class 8 - Corrosive material 49 CFR 173.136 Packing group (DOT) :II - Medium Danger Hazard labels (DOT) :8 - Corrosive Dangerous for the environment :Yes Marine pollutant :Yes
DOT Packaging Non Bulk (49 CFR 173.xxx) :202 DOT Packaging Bulk (49 CFR 173.xxx) :242DOT Special Provisions (49 CFR 172.102) :B2 - MC 300, MC 301, MC 302, MC 303, MC 305, and MC 306 and DOT 406 cargo tanks are
not authorized.
IB2 - Authorized IBCs: Metal (31A, 31B and 31N); Rigid plastics (31H1 and 31H2); Composite
(31HZ1). Additional Requirement: Only liquids with a vapor pressure less than or equal to 110
kPa at 50 C (1.1 bar at 122 F), or 130 kPa at 55 C (1.3 bar at 131 F) are authorized.
T11 - 6 178.274(d)(2) Normal............. 178.275(d)(3)
TP1 - The maximum degree of filling must not exceed the degree of filling determined by the
following: Degree of filling = 97 / 1 + a (tr - tf) Where: tr is the maximum mean bulk temperature
during transport, and tf is the temperature in degrees celsius of the liquid during filling.
TP27 - A portable tank having a minimum test pressure of 4 bar (400 kPa) may be used
provided the calculated test pressure is 4 bar or less based on the MAWP of the hazardous
material, as defined in 178.275 of this subchapter, where the test pressure is 1.5 times the
MAWP.
DOT Packaging Exceptions (49 CFR 173.xxx):154 DOT Quantity Limitations Passenger aircraft/rail
(49 CFR 173.27)
:1 L DOT Quantity Limitations Cargo aircraft only (49
CFR 175.75)
:30 L DOT Vessel Stowage Location :A - The material may be stowed on deck or under deck on a cargo vessel and on a
passenger vessel.
DOT Vessel Stowage Other :52 - Stow separated from acids Emergency Response Guide (ERG) Number :153 Other information :No supplementary information available.
Transportation of Dangerous GoodsTransport by sea
Transport document description (IMDG) :UN 2735 POLYAMINES, LIQUID, CORROSIVE, N.O.S. (CYCLOALIPATHIC AMINES,
TRIETHYLENETETRAMINE), 8, II
UN-No. (IMDG) :2735Proper Shipping Name (IMDG) :POLYAMINES, LIQUID, CORROSIVE, N.O.S.Class (IMDG) :8 - Corrosive substancesPacking group (IMDG) :II - substances presenting medium dangerMarine pollutant :Yes
EPOXY HARDENER
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
10/11/2021EN (English US)SDS ID: 80LM-3YB10/11
Air transport
Transport document description (IATA) :UN 2735 Polyamines, liquid, corrosive, n.o.s. (CYCLOALIPATHIC AMINES,
TRIETHYLENETETRAMINE), 8, II
UN-No. (IATA) :2735Proper Shipping Name (IATA) :Polyamines, liquid, corrosive, n.o.s.Class (IATA) :8 - CorrosivesPacking group (IATA) :II - Medium Danger
SECTION 15: Regulatory information
15.1. US Federal regulations
EPOXY HARDENER (Mixture)SARA Section 311/312 Hazard ClassesDelayed (chronic) health hazard1,3-bis(aminomethyl)cyclohexane (2579-20-6)Listed on the United States TSCA (Toxic Substances Control Act) inventorytriethylenetetramine (112-24-3)Listed on the United States TSCA (Toxic Substances Control Act) inventoryalpha-hydro-omega(2-aminomethylethoxy)poly(oxy(methyl-1,2-ethanediyl)ether with 2-ethyl-2-(hydroxymethyl)-1,3-propanediol (3:1)
(39423-51-3)
Listed on the United States TSCA (Toxic Substances Control Act) inventoryEPA TSCA Regulatory FlagXU - XU - indicates a substance exempt from reporting under the Chemical Data Reporting
Rule, (40 CFR 711).
POLYAMIDE CURING AGENT (MIXTURE)Not listed on the United States TSCA (Toxic Substances Control Act) inventorybenzyl alcohol (100-51-6)Listed on the United States TSCA (Toxic Substances Control Act) inventoryisophorone diamine (2855-13-2)Listed on the United States TSCA (Toxic Substances Control Act) inventory
15.2. International regulations
CANADA
1,3-bis(aminomethyl)cyclohexane (2579-20-6)Listed on the Canadian DSL (Domestic Substances List)triethylenetetramine (112-24-3)Listed on the Canadian DSL (Domestic Substances List)alpha-hydro-omega(2-aminomethylethoxy)poly(oxy(methyl-1,2-ethanediyl)ether with 2-ethyl-2-(hydroxymethyl)-1,3-propanediol (3:1)
(39423-51-3)
Listed on the Canadian DSL (Domestic Substances List)POLYAMIDE CURING AGENT (MIXTURE)Not listed on the Canadian DSL (Domestic Substances List)/NDSL (Non-Domestic Substances List)benzyl alcohol (100-51-6)Listed on the Canadian DSL (Domestic Substances List)isophorone diamine (2855-13-2)Listed on the Canadian DSL (Domestic Substances List)
EU-Regulations
No additional information available
National regulations
No additional information available
EPOXY HARDENER
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
10/11/2021EN (English US)SDS ID: 80LM-3YB11/11
15.3. US State regulations
ComponentState or local regulationstriethylenetetramine(112-24-3)U.S. - New Jersey - Right to Know Hazardous Substance Listisophorone diamine(2855-13-2)U.S. - New Jersey - Right to Know Hazardous Substance List
SECTION 16: Other information
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
Revision date :10/11/2021Data sources :REGULATION (EC) No 1272/2008 OF THE EUROPEAN PARLIAMENT AND OF THE
COUNCIL of 16 December 2008 on classification, labeling and packaging of substances and
mixtures, amending and repealing Directives 67/548/EEC and 1999/45/EC, and amending
Regulation (EC) No 1907/2006.
Other information :None.
Full text of H-phrases:H301Toxic if swallowedH302Harmful if swallowedH311Toxic in contact with skinH312Harmful in contact with skinH314Causes severe skin burns and eye damageH317May cause an allergic skin reactionH318Causes serious eye damageH320Causes eye irritationH332Harmful if inhaledH402Harmful to aquatic lifeH411Toxic to aquatic life with long lasting effectsH412Harmful to aquatic life with long lasting effects
SDS US (GHS HazCom 2012)
To the best of our knowledge this SDS is accurate. The the extent allowed by law, this statement is made in lieu of an other warranties, expressed or implied including but not limited to any implied
warranty of merchantability or fitness for a particular purpose and is in lieu of any other obligations or liability on the part of Dura Technoligies, Inc.
by | Sep 27, 2025
by | Sep 27, 2025
LH-102 B
1 | P a g e
Safety Data Sheet Revision: 09/15/2015
Section 1: Identification
Product Name: LH-102 BLUE
Identification: Poly Amine Curing Agent
Manufacturer: Resin Services Inc.
5959 18 Mile Road
Sterling Heights MI 48314 USA
Ph (586)254-6770 Fax(586)-254-6947
Emergency Overview
For chemical emergency, spill, leak, fire, exposure, or accident call CHEMTREC day or night
Within USA and Canada: 1-800-424-9300
Outside USA or Canada: +1-703-527-3887
Section 2: Hazard Identification
Potential Health Effects
Classification of the
Substance or mixture : ACUTE TOXICITY: oral Category 4
ACUTE TOXICITY: inhalation Category 4
SKIN CORROSION/IRRITATION Category 1
SERIOUS EYE DAMAGE/EYE IRRITATION- Category 1
RESPIRATORY SENSITATION Category 1
SKIN SENSITIZATION Category 1
TOXIC TO REPRODUCTION Category 2
SPECIFIC TARGET ORGAN TOXICITY (SINGLE EXPOSURE)
[central nervous system (CNS), eyes] Category 1
SPECIFIC TARGET ORGAN TOXICITY (SINGLE EXPOSURE)
[Narcotic effects] Category 3
SPECIFIC TARGET ORGAN TOXICITY (SINGLE EXPOSURE)
[Respiratory tract irritation] Category 3
SPECIFIC TARGET ORGAN TOXICITY (REPEAT EXPOSURE)
LH-102 B
2 | P a g e
[Blood system, lungs, skin, respiratory tract, liver, kidneys] Category 1
GHS LABEL ELEMENTS
HAZARD PICTOGRAMS :
Signal Word : Danger
Hazard Statements : H302 Harmful if swallowed
H312 Harmful in contact with skin
H332 Harmful if inhaled
H314 Causes severe skin burns and eye damage
H318 Causes serious eye damage
H334 May cause allergy or asthma symptoms or breathing difficulties
If inhaled
H317 May cause an allergic skin reaction
H361 f Suspected of damaging fertility
H361 d Suspected of damaging the unborn child
H335 May cause respiratory irritation
H370 Causes damage to organs (central nervous system (CNS),eyes)
H336 May cause drowsiness and dizziness
H372 Causes damage to organs through prolonged or repeated exposure:
(blood system, skin, respiratory tract, liver, kidneys)
PRECAUTIONARY STATEMENTS
Prevention : Obtain special instruction before use
Do not handle until all safety precautions have been read and understood
Use personal protection equipment as required
Wear protective gloves
Wear eye or face protection
Wear protective clothing
In case of inadequate ventilation wear respiratory protection
Use only outdoor or in well-ventilated area
LH-102 B
3 | P a g e
Do not breathe vapor
Do not eat, drink or smoke when using this product
Wash hands thoroughly after handling
Contaminated work clothing should not be allowed out of workplace
Response : Get medical attention if you fell unwell
IF EXPOSED: Call a POSION CONTROL or physician
IF INHALED: Remove victim to fresh air and keep at rest in a position
Comfortable for breathing. Immediately call a POISON CENTER or physician
If experiencing respiratory symptoms. Call a POISON CENTER or physician
IF SWALLOWED: Immediately call POSION CENTER or physician
Rinse mouth. Do NOT induce vomiting.
IF ON SKIN (or hair): Take off immediately all contaminated clothing
Rinse skin with water or shower. Wash contaminated clothing before reuse.
Immediately call a POISON CENTER or physician
IF ON SKIN: Wash with plenty of soap and water. If skin, irritation or rash
. occurs. Get medical attention
IF IN EYES: Rinse cautiously with water for several minutes. Remove contact
Lenses, if present and easy to do. Continue rinsing. Immediately call a
POISON CENTER or physician.
Storage : Store locked up
Disposal : Dispose of contents and container in accordance with all local,
Regional, national and international regulations.
Hazards Material Information System (United States):
Health 3
Flammability 1
Physical Hazard 0
Hazard Codes: 0= Chronic Hazard, 0= Minimal Hazard, 1= Slight Hazard, 2= Moderate Hazard, 3= Serious Hazard,
4= Severe Hazard
LH-102 B
4 | P a g e
Section 3 Composition/Information on Ingredients
Ingredient Name CAS Number % wt or %
vol
TRIETHYLENETETRAMINE 0112-24-3 40-60
POLYOXYPROPYLENEDIAMINE 9046-10-0 20-30
DIETHYLENETRIAMINE 111-40-0 20-30
2-ETHYL-4-METHYLIMIDAZOLE 931-36-2 1-2
BLUE PIGMENT ********* -1
Section 4 First-Aid Measures
Inhalation: REMOVE VICTIM TO FRESH AIR AND PROVIDE OXYGEN IF BREATHING IS DIFFICULT. GIVE
ARTIFICIAL RESPIRATION IF NOT BREATHING. GET MEDICAL ATTENTION.
Eye Contact: FLUSH EYES WITH PLENTY OF WATER FOR 30 MINUTES WHILE HOLDING EYELIDS OPEN.
GET MEDICAL ATTENTION.
Skin Contact: REMOVE CONTAMINATED CLOTHING/SHOES AND WIPE EXCESS FROM SKIN. FLUSH SKIN
WITH WATER. FOLLOW BY WASHING WITH SOAP AND WATER. IF IRRITATION OCCURS, GET MEDICAL ATTENTION. DO
NOT REUSE CLOTHING UNTIL CLEANED. CONTAMINATED LEATHER ARTICLES,
INCLUDING SHOES, CANNOT BE DECONTAMINATED AND SHOULD BE DESTROYED TO PREVENT REUSE.
Ingestion: DO NOT INDUCE VOMITING , CALL A PHYSICIAN.
After first aid, get appropriate in-plant, paramedic, or community medical support.
Special Precautions/Procedures: STORE IN COOL, DRY PLACE WITH ADEQUATE VENTILATION. KEEP AWAY
FROM OPEN FLAMES AND HIGH TEMPERATURES.
LH-102 B
5 | P a g e
Section 5 Fire-Fighting Measures
Extinguishing Media: USE WATER FOG, ALCOHOL FOAM DRY CHEMICAL OR C02.
Unusual Fire or Explosion Hazards: NO UNUSUAL HAZARDS.
Hazardous Combustion Products: NO UNUSUAL HAZARDS.
Fire-Fighting Instructions: Do not release runoff from fire control methods to sewer or waterways.
Fire-Fighting Equipment: Because fire may produce toxic thermal decomposition products, wear a self-contained
breathing apparatus (SCBA) with full face piece operated in pressure-demand or positive-pressure mode.
Section 6 Accidental Release Measures
Spill /Leak Procedures: MAY BURN ALTHOUGH NOT READILY IGNITABLE.
Small Spills: TAKE UP WITH AN ABSORBENT MATERIAL AND DISPOSE OF PROPERLY.
Large Spills DIKE AND CONTAIN. REMOVE WITH VACUUM TRUCKS OR PUMP TO STORAGE/SALVAGE
MATERIAL; DISPOSE OF PROPERLY.
Containment: For large spills, dike far ahead of liquid spill for later disposal. Do not release into sewers or
waterways.
Cleanup: FLUSH AREA WITH WATER TO REMOVE TRACE RESIDUE.
Regulatory Requirements: Follow applicable OSHA regulations (29 CFR 1910.120).
Section 7 Handling and Storage
Handling Precautions: MINIMIZE ALL CONTACT WITH MATERIAL. WASH WITH SOAP AND WATER BEFORE
EATING, DRINKING, SMOKING, APPLYING COSMETICS OR USING TOILET FACILITIES.
Storage Requirements: STORE IN COOL, DRY PLACE WITH ADEQUATE VENTILATION.
Regulatory Requirements: NONE
LH-102 B
6 | P a g e
Section 8 Exposure Controls/Personal Protection
Engineering Controls:
Ventilation: Provide general or local exhaust ventilation systems to maintain airborne concentrations below OSHA
PELs (Sec. 2). Local exhaust ventilation is preferred because it prevents contaminant dispersion into the work area
by controlling it at its source.
Administrative Controls:
Respiratory Protection: Seek professional advice prior to respirator selection and use. Follow OSHA respirator
regulations (29 CFR 1910.134) and, if necessary, wear a MSHA/NIOSH-approved respirator. Select respirator based
on its suitability to provide adequate worker protection for given working conditions, level of airborne
contamination, and presence of sufficient oxygen. For emergency or non routine operations (cleaning spills, reactor
vessels, or storage tanks), wear an SCBA. Warning! Air-purifying respirators do not protect workers in oxygen-
deficient atmospheres. If respirators are used, OSHA requires a written respiratory protection program that includes
at least: medical certification, training, fit-testing, periodic environmental monitoring, maintenance, inspection,
cleaning, and convenient, sanitary storage areas.
Protective Clothing/Equipment: Wear chemically protective gloves, boots, aprons, and gauntlets to prevent
prolonged or repeated skin contact. Wear protective eyeglasses or chemical safety goggles, per OSHA eye- and face-
protection regulations (29 CFR 1910.133). Contact lenses are not eye protective devices. Appropriate eye protection
must be worn instead of, or in conjunction with contact lenses.
Safety Stations: Make emergency eyewash stations, safety/quick-drench showers, and washing facilities available in
work area.
Contaminated Equipment: Separate contaminated work clothes from street clothes. Launder before reuse. Remove
this material from your shoes and clean personal protective equipment.
Comments: Never eat, drink, or smoke in work areas. Practice good personal hygiene after using this material, especially
before eating, drinking, smoking, using the toilet, or applying cosmetics
LH-102 B
7 | P a g e
Sections 9 Physical and Chemical Properties
Physical State: LIQUID
Appearance and Odor: BLUE ; FAINT AMINE – LIKE
ODOR
Vapor Pressure: 0.015 mm Hg at F (20 C)
Vapor Density (Air=1): NOT VOLATILE
Density: 7.8 W.P.G.
Specific Gravity (H2O=1, at 4 C): .94
Water Solubility: APPRECIABLE
Boiling Point: 477 F {247 C}
Freezing/Melting Point: N/A
Flash Point: 234 F (112 C)
% Volatile: NOT VOLATILE
Evaporation Rate: NOT VOLATILE
Section 10 Stability and Reactivity
Stability: Stable at room temperature in closed containers under normal storage and handling conditions.
Polymerization: Hazardous polymerization cannot occur.
Chemical Incompatibilities: STRONG OXIDANTS , ACIDS
Conditions to Avoid: N/A
Hazardous Decomposition Products: Thermal oxidative decomposition can produce AMMONIA , BURNING WILL
PRODUCE TOXIC FUMES ; CO , NITRIC OXIDES , THERMAL DECOMPOSITION TEMPERATURE : 500 F {260 C}
Section 11 Toxicological Information
Likely routes of exposure: N/A
Symptoms related to the physical, chemical and toxicological characteristics:
Ingestion: Ingestion may cause gastrointestinal irritation or ulceration. Ingestion may cause burns of mouth and throat. Aspiration
into the lungs may occur during ingestion or vomiting, causing tissue damage or lung injury.
Skin Contact: Prolong or widespread skin contact may result in absorption of harmful amounts.
Irritation:
Skin: Brief contact may cause severe skin burns. Symptoms may include pain, serve local redness and tissue damage. Skin contact
has caused allergic skin reactions in certain sensitized individuals.
Eyes: May cause pain disproportionate to the level of irritation to eye tissues. May cause severe irritation with corneal injury which
may result in permanent impairment of vision, even blindness. Chemical burns may occur.
Inhalation: May cause allergic respiratory response.
LH-102 B
8 | P a g e
Excessive exposure may cause irritation to upper respiratory tract (nose and throat).
Delayed and immediate effects and also chronic effects from short and long term exposure:
Carcinogen: This product contains no materials that are reported as known or suspect carcinogens in levels above 0.1%.
Mutagen: This product contains no materials that are reported as known or suspect mutagens in levels above 0.1%.
Reproductive Hazard: This product contains no materials that are reported as known or suspected of causing a reproductive hazard
in levels above 0.1%
Numerical measures of toxicity: The finished product has not been tested to determine individual toxicological/ ecological limits.
Section 12 Ecological Information
Ecotoxicity: Individual components of this mixture have been independently tested by the raw material suppliers and any known
results have been presented in section 3. The results for the individual components may not be representative of the ecological toxicity
of this finished product. This finished product has not been tested to determine individual toxicological/ ecological limits. Great caution
should be taken to prevent release to the environment. See section 13 for further information.
Persistence and degradability: N/A
Bioaccumulative potential: N/A
Mobility in soil: N/A
Other adverse effects: N/A
Section 13 Disposal Considerations
Disposal Methods: Preferred method of disposal includes incineration under controlled conditions in accordance with all
local and national laws and regulations. The generation of waste should be avoided or minimized wherever possible.
Untreated material is not suitable for disposal. Waste, even small quantities, should never be poured down drains, sewers
or watercourses. Waste must be disposed of in accordance with federal, state and local environmental control
regulations. This material, when properly mixed and cured with its resin components at the proper mix ratio, may be
safely landfilled.
Contaminated packaging: Empty containers can only be disposed of when the remaining product adhering to the
container walls have been removed. Hazard warning labels should be removed from container only after it has been
properly emptied.
LH-102 B
9 | P a g e
Section 14 Transport Information
D.O.T. AIR/ROAD/RAIL ICAO/IATA AIR TRANSPORT IMDG SEA TRANSPORT
TRANSPORT(49CFR)
UN NUMBER: UN1760 UN NUMBER: UN1760 UN NUMBER: UN1760
Proper Shipping Name: Proper Shipping Name: Proper Shipping Name:
CORROSIVE, LIQUID,N.O.S. CORROSIVE, LIQUID,N.O.S. CORROSIVE, LIQUID,N.O.S.
(TRIETHYLENETETRAMINE, (TRIETHYLENETETRAMINE, (TRIETHYLENETETRAMINE,
DIETHYLENETRIAMINE) DIETHYLENETRIAMINE) DIETHYLENETRIAMINE)
Transport Hazard Class: 8 Transport Hazard Class: 8 Transport Hazard Class: 8
Packing Group: II Packing Group: II Packing Group: II
Section 15 Regulatory Information
Safety, health and environmental regulations:
TSCA: This product is manufactured in compliance with all provisions of the Toxic Substances Control Act, 15 U.S.C.
2601 et. Seq. This product contains a chemical substance that is subject to export notification under Section 12(b) of the
Toxic Substance Control Act, 15 U.S.C. 2601 et.seq.
Toxic Substance Control Act (TSCA) 12(b) Components: None known
OSHA Hazard Communication Standard (29CFR1910. 1200) hazard class(es). Corrosive, Toxic by skin Absorption,
Dangerous for the Environment.
EPA SARA Title III section 302 (40CFR370) Hazard Class: Immediate Health Hazard, Delayed Health Hazard
EPA SARA Title III section313 (40CFR372) Toxic Chemicals above de minimus levels: None
CALIFORNIA PROPOSITION 65: SUBSTANCE (component(s) know to the State of California to cause cancer and/ or
reproductive and subject to warning and discharge requirements under the Safe Drinking Water and Toxic
Enforcement Act of 1986 ) NONE
Section 16 Other information
Company policy or disclaimer- To the best of our knowledge, the information contained herein is accurate.
Final determination of the suitability of any material is sole responsibility of the users. All materials may present
unknown hazards and should be used with caution. Although certain hazards are described herein, we cannot
guarantee that these are the only hazards which exist.
LH-102 B
10 | P a g e
by | Sep 27, 2025
by | Sep 27, 2025
Page 1/12
Safety Data Sheet
acc. to OSHA HCS
Printing date 12/02/2019 Reviewed on 12/02/2019
49.1.7
1 Identification
Product identifier
Trade name: TCC 401 Resin
Article number:I401088
Application of the substance / the mixtureEpoxy resin
Details of the supplier of the safety data sheet
Sika Advanced Resins, US
EHS Department
Manufacturer/Supplier:
Supplier’s Name: Sika Advanced Resins, US
Headquarters:
30800 Stephenson Hwy
Madison Heights, MI 48071
USA
ehs-us@axson.com
Information department:Product safety department
Emergency telephone number:
During normal opening times: +1 (248) 588-2270
CHEMTREC 24-hour Emergency: +1 (800) 424-9300
2 Hazard(s) identification
Classification of the substance or mixture
GHS08 Health hazard
Carc. 2 H351 Suspected of causing cancer.
GHS09 Environment
Aquatic Chronic 2 H411 Toxic to aquatic life with long lasting effects.
GHS07
Skin Irrit. 2 H315 Causes skin irritation.
Eye Irrit. 2A H319 Causes serious eye irritation.
Skin Sens. 1 H317 May cause an allergic skin reaction.
Label elements
GHS label elementsThe product is classified and labeled according to the Globally Harmonized System (GHS).
(Contd. on page 2) US
Page 2/12
Safety Data Sheet
acc. to OSHA HCS
Printing date 12/02/2019 Reviewed on 12/02/2019
Trade name: TCC 401 Resin
(Contd. of page 1)
49.1.7
Hazard pictograms
GHS07GHS08GHS09
Signal wordWarning
Hazard-determining components of labeling:
Reaction Product of Bisphenol A and Epichlorohydrin
Carbon black
1,4-bis[92,3-epoxypropoxy0methyl]cyclohexane
oxirane, mono[(C12-14-alkyloxy)methyl] derivs
Alkyl C12-C14 Glycidyl Ether
Hazard statements
Causes skin irritation.
Causes serious eye irritation.
May cause an allergic skin reaction.
Suspected of causing cancer.
Toxic to aquatic life with long lasting effects.
Precautionary statements
Avoid breathing dust/fume/gas/mist/vapors/spray
Avoid breathing dust/fume/gas/mist/vapors/spray
Avoid release to the environment.
Wear protective gloves/protective clothing/eye protection/face protection.
If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do.
Continue rinsing.
IF exposed or concerned: Get medical advice/attention.
If skin irritation or rash occurs: Get medical advice/attention.
If eye irritation persists: Get medical advice/attention.
Wash contaminated clothing before reuse.
Store locked up.
Dispose of contents/container in accordance with local/regional/national/international regulations.
Classification system:
NFPA ratings (scale 0 – 4)
2
1
0
Health = 2
Fire = 1
Reactivity = 0
HMIS-ratings (scale 0 – 4)
HEALTH
FIRE
REACTIVITY
2
1
0
Health = 2
Fire = 1
Reactivity = 0
(Contd. on page 3)
US
Page 3/12
Safety Data Sheet
acc. to OSHA HCS
Printing date 12/02/2019 Reviewed on 12/02/2019
Trade name: TCC 401 Resin
(Contd. of page 2)
49.1.7
Other hazards
Results of PBT and vPvB assessment
PBT:Not applicable.
vPvB:Not applicable.
3 Composition/information on ingredients
Chemical characterization: Mixtures
Description:Mixture of the substances listed below with nonhazardous additions.
Dangerous components:
CAS: 25068-38-6
NLP: 500-033-5
Reaction Product of Bisphenol A and Epichlorohydrin 25- 50%
CAS: 14228-73-0 1,4-bis[92,3-epoxypropoxy0methyl]cyclohexane 5-<10%
CAS: 68609-97-2
EINECS: 271-846-8
oxirane, mono[(C12-14-alkyloxy)methyl] derivs
Alkyl C12-C14 Glycidyl Ether 5-<10%
CAS: 1333-86-4
EINECS: 215-609-9
Carbon black 1-5%
* 4 First-aid measures
Description of first aid measures
General information:Immediately remove any clothing soiled by the product.
After inhalation:
Supply fresh air and to be sure call for a doctor.
In case of unconsciousness place patient stably in side position for transportation.
After skin contact:Immediately wash with water and soap and rinse thoroughly.
After eye contact:
Rinse opened eye for several minutes under running water. If symptoms persist, consult a doctor.
After swallowing:If symptoms persist consult doctor.
Information for doctor:
Most important symptoms and effects, both acute and delayedNo further relevant information available.
Indication of any immediate medical attention and special treatment needed
No further relevant information available.
5 Fire-fighting measures
Extinguishing media
Suitable extinguishing agents:Use fire fighting measures that suit the environment.
Special hazards arising from the substance or mixtureNo further relevant information available.
Advice for firefighters
Protective equipment:Wear self-contained respiratory protective device.
(Contd. on page 4)
US
Page 4/12
Safety Data Sheet
acc. to OSHA HCS
Printing date 12/02/2019 Reviewed on 12/02/2019
Trade name: TCC 401 Resin
(Contd. of page 3)
49.1.7
Additional information
Dispose of fire debris and contaminated fire fighting water in accordance with official regulations.
* 6 Accidental release measures
Personal precautions, protective equipment and emergency proceduresNot required.
Environmental precautions:
Do not allow product to reach sewage system or any water course.
Inform respective authorities in case of seepage into water course or sewage system.
Do not allow to enter sewers/ surface or ground water.
Methods and material for containment and cleaning up:
Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust).
Dispose contaminated material as waste according to item 13.
Ensure adequate ventilation.
Reference to other sections
See Section 7 for information on safe handling.
See Section 8 for information on personal protection equipment.
See Section 13 for disposal information.
Protective Action Criteria for Chemicals
PAC-1:
25068-38-6 Reaction Product of Bisphenol A and Epichlorohydrin 90 mg/m
1333-86-4 Carbon black 9 mg/m
PAC-2:
25068-38-6 Reaction Product of Bisphenol A and Epichlorohydrin 990 mg/m
1333-86-4 Carbon black 99 mg/m
PAC-3:
25068-38-6 Reaction Product of Bisphenol A and Epichlorohydrin 5,900 mg/m
1333-86-4 Carbon black 590 mg/m
* 7 Handling and storage
Handling:
Precautions for safe handling
Ensure good ventilation/exhaustion at the workplace.
Open and handle receptacle with care.
Prevent formation of aerosols.
Information about protection against explosions and fires:Keep respiratory protective device available.
Conditions for safe storage, including any incompatibilities
Storage:
Requirements to be met by storerooms and receptacles:No special requirements.
Information about storage in one common storage facility:Not required.
(Contd. on page 5)
US
Page 5/12
Safety Data Sheet
acc. to OSHA HCS
Printing date 12/02/2019 Reviewed on 12/02/2019
Trade name: TCC 401 Resin
(Contd. of page 4)
49.1.7
Further information about storage conditions:Keep receptacle tightly sealed.
Specific end use(s)No further relevant information available.
* 8 Exposure controls/personal protection
Additional information about design of technical systems:No further data; see item 7.
Control parameters
Components with limit values that require monitoring at the workplace:
The product does not contain any relevant quantities of materials with critical values that have to be monitored at
the workplace.
Additional information:The lists that were valid during the creation were used as basis.
Exposure controls
Personal protective equipment:
General protective and hygienic measures:
Keep away from foodstuffs, beverages and feed.
Immediately remove all soiled and contaminated clothing.
Wash hands before breaks and at the end of work.
Store protective clothing separately.
Avoid contact with the eyes and skin.
Breathing equipment:
In case of brief exposure or low pollution use respiratory filter device. In case of intensive or longer exposure use
respiratory protective device that is independent of circulating air.
Protection of hands:
Protective gloves
The glove material has to be impermeable and resistant to the product/ the substance/ the preparation.
Due to missing tests no recommendation to the glove material can be given for the product/ the preparation/ the
chemical mixture.
Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation
Material of gloves
The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and
varies from manufacturer to manufacturer. As the product is a preparation of several substances, the resistance of
the glove material can not be calculated in advance and has therefore to be checked prior to the application.
Penetration time of glove material
The exact break through time has to be found out by the manufacturer of the protective gloves and has to be
observed.
(Contd. on page 6)
US
Page 6/12
Safety Data Sheet
acc. to OSHA HCS
Printing date 12/02/2019 Reviewed on 12/02/2019
Trade name: TCC 401 Resin
(Contd. of page 5)
49.1.7
Eye protection:
Tightly sealed goggles
* 9 Physical and chemical properties
Information on basic physical and chemical properties
General Information
Appearance:
Form: Viscous
Color: Black
Odor: Amine-like
Odor threshold: Not determined.
pH-value: Not determined.
Change in condition
Melting point/Melting range:Undetermined.
Boiling point/Boiling range:Undetermined.
Flash point: 150 C (302 F)
Flammability (solid, gaseous):Not applicable.
Decomposition temperature: Not determined.
Auto igniting: Product is not selfigniting.
Danger of explosion: Product does not present an explosion hazard.
Explosion limits:
Lower: Not determined.
Upper: Not determined.
Vapor pressure: Not determined.
Density at 20 C (68 F): 3.41 g/cm (28.46 lbs/gal)
Relative density Not determined.
Vapor density Not determined.
Evaporation rate Not determined.
Solubility in / Miscibility with
Water: Not miscible or difficult to mix.
Partition coefficient (n-octanol/water):Not determined.
Viscosity:
Dynamic: Not determined.
(Contd. on page 7)
US
Page 7/12
Safety Data Sheet
acc. to OSHA HCS
Printing date 12/02/2019 Reviewed on 12/02/2019
Trade name: TCC 401 Resin
(Contd. of page 6)
49.1.7
Kinematic: Not determined.
Solvent content:
Organic solvents: 0.4 %
VOC content: 0.38 %
13.0 g/l / 0.11 lb/gal
Solids content: 64.2 %
Other information No further relevant information available.
* 10 Stability and reactivity
ReactivityNo further relevant information available.
Chemical stability
Thermal decomposition / conditions to be avoided:No decomposition if used according to specifications.
Possibility of hazardous reactionsNo dangerous reactions known.
Conditions to avoidNo further relevant information available.
Incompatible materials:No further relevant information available.
Hazardous decomposition products:Carbon monoxide and carbon dioxide
* 11 Toxicological information
Information on toxicological effects
Acute toxicity:
Primary irritant effect:
on the skin:Irritant to skin and mucous membranes.
on the eye:Irritating effect.
Sensitization:Sensitization possible through skin contact.
Additional toxicological information:
The product shows the following dangers according to internally approved calculation methods for preparations:
Irritant
Carcinogenic categories
IARC (International Agency for Research on Cancer)
1309-37-1 diiron trioxide 3
14807-96-6 Talc (Mg3H2(SiO3)4) 3
1333-86-4 Carbon black 2B
14808-60-7 Quartz (SiO2) 1
7631-86-9 silicon dioxide, chemically prepared 3
NTP (National Toxicology Program)
14808-60-7 Quartz (SiO2) K
(Contd. on page 8)
US
Page 8/12
Safety Data Sheet
acc. to OSHA HCS
Printing date 12/02/2019 Reviewed on 12/02/2019
Trade name: TCC 401 Resin
(Contd. of page 7)
49.1.7
OSHA-Ca (Occupational Safety & Health Administration)
None of the ingredients is listed.
12 Ecological information
Toxicity
Aquatic toxicity:No further relevant information available.
Persistence and degradabilityNo further relevant information available.
Behavior in environmental systems:
Bioaccumulative potentialNo further relevant information available.
Mobility in soilNo further relevant information available.
Ecotoxical effects:
Remark:Toxic for fish
Additional ecological information:
General notes:
Water hazard class 2 (Self-assessment): hazardous for water
Do not allow product to reach ground water, water course or sewage system.
Danger to drinking water if even small quantities leak into the ground.
Also poisonous for fish and plankton in water bodies.
Toxic for aquatic organisms
Results of PBT and vPvB assessment
PBT:Not applicable.
vPvB:Not applicable.
Other adverse effectsNo further relevant information available.
13 Disposal considerations
Waste treatment methods
Recommendation:
Must not be disposed of together with household garbage. Do not allow product to reach sewage system.
Uncleaned packagings:
Recommendation:Disposal must be made according to official regulations.
* 14 Transport information
UN-Number
DOT not regulated
IMDG, IATA UN3082
UN proper shipping name
DOT not regulated
(Contd. on page 9)
US
Page 9/12
Safety Data Sheet
acc. to OSHA HCS
Printing date 12/02/2019 Reviewed on 12/02/2019
Trade name: TCC 401 Resin
(Contd. of page 8)
49.1.7
IMDG ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID,
N.O.S. (Epoxy Resin), MARINE POLLUTANT
IATA ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID,
N.O.S. (Epoxy Resin)
Transport hazard class(es)
DOT
Class not regulated
IMDG, IATA
Class 9 Miscellaneous dangerous substances and articles
Label 9
Packing group
DOT not regulated
IMDG, IATA III
Environmental hazards: Product contains environmentally hazardous substances: Epoxy
Resin
Marine pollutant: Yes
Symbol (fish and tree)
Special marking (IATA): Symbol (fish and tree)
Special precautions for user Warning: Miscellaneous dangerous substances and articles
Danger code (Kemler): 90
EMS Number: F-A,S-F
Stowage Category A
Transport in bulk according to Annex II of
MARPOL73/78 and the IBC Code Not applicable.
Transport/Additional information:
IMDG
Limited quantities (LQ) 5L
Excepted quantities (EQ) Code: E1
Maximum net quantity per inner packaging: 30 ml
Maximum net quantity per outer packaging: 1000 ml
UN "Model Regulation": UN 3082 ENVIRONMENTALLY HAZARDOUS SUBSTANCE,
LIQUID, N.O.S. (EPOXY RESIN), 9, III
US
(Contd. on page 10)
Page 10/12
Safety Data Sheet
acc. to OSHA HCS
Printing date 12/02/2019 Reviewed on 12/02/2019
Trade name: TCC 401 Resin
(Contd. of page 9)
49.1.7
* 15 Regulatory information
Safety, health and environmental regulations/legislation specific for the substance or mixture
Sara
Section 355 (extremely hazardous substances):
None of the ingredients is listed.
Section 313 (Specific toxic chemical listings):
None of the ingredients is listed.
TSCA (Toxic Substances Control Act):
1309-37-1 diiron trioxide ACTIVE
1317-61-9 triiron tetraoxide ACTIVE
25068-38-6 Reaction Product of Bisphenol A and Epichlorohydrin ACTIVE
14807-96-6 Talc (Mg3H2(SiO3)4) ACTIVE
14228-73-0 1,4-bis[92,3-epoxypropoxy0methyl]cyclohexane ACTIVE
68609-97-2 oxirane, mono[(C12-14-alkyloxy)methyl] derivs
Alkyl C12-C14 Glycidyl Ether
ACTIVE
1333-86-4 Carbon black ACTIVE
14808-60-7 Quartz (SiO2) ACTIVE
7631-86-9 silicon dioxide, chemically prepared ACTIVE
1318-59-8 Chlorite ACTIVE
64742-95-6 Solvent naphtha (petroleum), light arom. ACTIVE
Organic derivative of castor oil *
Air Releasing Polymer ACTIVE
Chemicals regulated by TSCA Section 12(b)
None of the ingredients is listed.
Chemical regulated by TSCA 5(a)(2)rule:
None of the ingredients is listed.
Hazardous Air Pollutants
98-82-8 cumene
Proposition 65
Chemicals known to cause cancer:
1333-86-4 Carbon black
14808-60-7 Quartz (SiO2)
98-82-8 cumene
Chemicals known to cause reproductive toxicity for females:
None of the ingredients is listed.
(Contd. on page 11)
US
Page 11/12
Safety Data Sheet
acc. to OSHA HCS
Printing date 12/02/2019 Reviewed on 12/02/2019
Trade name: TCC 401 Resin
(Contd. of page 10)
49.1.7
Chemicals known to cause reproductive toxicity for males:
None of the ingredients is listed.
Chemicals known to cause developmental toxicity:
None of the ingredients is listed.
Carcinogenic categories
TLV (Threshold Limit Value established by ACGIH)
1333-86-4 Carbon black A4
NIOSH-Ca (National Institute for Occupational Safety and Health)
1333-86-4 Carbon black
14808-60-7 Quartz (SiO2)
Listed in CWC Regulations
None of the ingredients is listed.
GHS label elementsThe product is classified and labeled according to the Globally Harmonized System (GHS).
Hazard pictograms
GHS07GHS08GHS09
Signal wordWarning
Hazard-determining components of labeling:
Reaction Product of Bisphenol A and Epichlorohydrin
Carbon black
1,4-bis[92,3-epoxypropoxy0methyl]cyclohexane
oxirane, mono[(C12-14-alkyloxy)methyl] derivs
Alkyl C12-C14 Glycidyl Ether
Hazard statements
Causes skin irritation.
Causes serious eye irritation.
May cause an allergic skin reaction.
Suspected of causing cancer.
Toxic to aquatic life with long lasting effects.
Precautionary statements
Avoid breathing dust/fume/gas/mist/vapors/spray
Avoid release to the environment.
Wear protective gloves/protective clothing/eye protection/face protection.
If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do.
Continue rinsing.
IF exposed or concerned: Get medical advice/attention.
If skin irritation or rash occurs: Get medical advice/attention.
If eye irritation persists: Get medical advice/attention.
(Contd. on page 12)
US
Page 12/12
Safety Data Sheet
acc. to OSHA HCS
Printing date 12/02/2019 Reviewed on 12/02/2019
Trade name: TCC 401 Resin
(Contd. of page 11)
49.1.7
Wash contaminated clothing before reuse.
Store locked up.
Dispose of contents/container in accordance with local/regional/national/international regulations.
Chemical safety assessment:A Chemical Safety Assessment has not been carried out.
16 Other information
This information is based on our present knowledge. However, this shall not constitute a guarantee for any
specific product features and shall not establish a legally valid contractual relationship.
Date of preparation / last revision12/02/2019 / 2
Abbreviations and acronyms:
IMDG: International Maritime Code for Dangerous Goods
DOT: US Department of Transportation
IATA: International Air Transport Association
ACGIH: American Conference of Governmental Industrial Hygienists
EINECS: European Inventory of Existing Commercial Chemical Substances
ELINCS: European List of Notified Chemical Substances
CAS: Chemical Abstracts Service (division of the American Chemical Society)
NFPA: National Fire Protection Association (USA)
HMIS: Hazardous Materials Identification System (USA)
VOC: Volatile Organic Compounds (USA, EU)
PBT: Persistent, Bioaccumulative and Toxic
vPvB: very Persistent and very Bioaccumulative
NIOSH: National Institute for Occupational Safety
OSHA: Occupational Safety & Health
TLV: Threshold Limit Value
PEL: Permissible Exposure Limit
REL: Recommended Exposure Limit
Skin Irrit. 2: Skin corrosion/irritation Category 2
Eye Irrit. 2A: Serious eye damage/eye irritation Category 2A
Skin Sens. 1: Skin sensitisation Category 1
Carc. 2: Carcinogenicity Category 2
Aquatic Chronic 2: Hazardous to the aquatic environment - long-term aquatic hazard Category 2
* Data compared to the previous version altered.
US
by | Sep 27, 2025
T-Prime 130-1 Hardener
Safety Data Sheet
according to Regulation (EC) No. 1907/2006 (REACH) with its amendment Regulation (EU) 2015/830
Issue date: 5/27/2015 Revision date: 8/4/2020 Supersedes: 8/23/2018 Version: 1.10
8/4/2020 (Version: 1.10)EN (English) 1/9
SECTION 1: Identification of the substance/mixture and of the company/undertaking
1.1. Product identifier
Product form
:Mixture
Name
:T-Prime 130-1 Hardener
Type of product
:Hardener (Crosslinker)
Product group
:Hardener
1.2. Relevant identified uses of the substance or mixture and uses advised against
1.2.1. Relevant identified uses
Main use category
:Industrial use
Industrial/Professional use spec
:For professional use only
1.2.2. Uses advised against
No additional information available
1.3. Details of the supplier of the safety data sheet
1.4. Emergency telephone number
Emergency number
:Carechem 24: +44 (0) 1273 289451 24 Hours
Telephone number for use in case of chemical exposure, spillage or fire only.
SECTION 2: Hazards identification
2.1. Classification of the substance or mixture
Classification according to Regulation (EC) No. 1272/2008 [CLP]
Acute toxicity (oral), Category 4
H302
Acute toxicity (dermal), Category 4
H312
Skin corrosion/irritation, Category 1, Sub-Category 1B
H314
Serious eye damage/eye irritation, Category 1
H318
Skin sensitisation, Category 1
H317
Hazardous to the aquatic environment Chronic Hazard, Category 3
H412
Full text of H statements : see section 16
Adverse physicochemical, human health and environmental effects
Harmful in contact with skin. Harmful if swallowed. Causes severe skin burns and eye damage. May cause an allergic skin reaction. Causes serious
eye damage. Harmful to aquatic life with long lasting effects.
2.2. Label elements
Labelling according to Regulation (EC) No. 1272/2008 [CLP]
Hazard pictograms (CLP)
: GHS05 GHS07
Signal word (CLP)
:Danger
Hazardous ingredients
:3-aminomethyl-3,5,5-trimethylcyclohexylamine
Gurit (UK) Ltd
St Cross Business Park
Newport
PO30 5WU Isle of Wight – United Kingdom
T +44 (0) 1983 828 000 (All Technical and Commercial Enquiries)
Regulatory@gurit.com – www.gurit.com
T-Prime 130-1 Hardener
Safety Data Sheet
according to Regulation (EC) No. 1907/2006 (REACH) with its amendment Regulation (EU) 2015/830
8/4/2020 (Version: 1.10)EN (English) 2/9
Hazard statements (CLP)
:H302+H312 – Harmful if swallowed or in contact with skin.
H314 – Causes severe skin burns and eye damage.
H317 – May cause an allergic skin reaction.
H412 – Harmful to aquatic life with long lasting effects.
Precautionary statements (CLP)
:P260 – Do not breathe vapours.
P264 – Wash hands thoroughly after handling.
P270 – Do not eat, drink or smoke when using this product.
P272 – Contaminated work clothing should not be allowed out of the workplace.
P273 – Avoid release to the environment.
P280 – Wear eye protection, protective clothing, protective gloves.
2.3. Other hazards
No additional information available
SECTION 3: Composition/information on ingredients
3.1. Substances
Not applicable
3.2. Mixtures
NameProduct identifier%Classification according to
Regulation (EC) No.
1272/2008 [CLP]
3-aminomethyl-3,5,5-trimethylcyclohexylamine(CAS-No.) 2855-13-2
(EC-No.) 220-666-8
(EC Index-No.) 612-067-00-9
(REACH-no) 01-2119514687-32
50Acute Tox. 4 (Oral), H302
Acute Tox. 4 (Dermal), H312
Skin Corr. 1B, H314
Skin Sens. 1, H317
Aquatic Chronic 3, H412
Full text of H-statements: see section 16
SECTION 4: First aid measures
4.1. Description of first aid measures
First-aid measures general
:Call a physician immediately.
First-aid measures after inhalation
:Remove person to fresh air and keep comfortable for breathing.
First-aid measures after skin contact
:Rinse skin with water/shower. Take off immediately all contaminated clothing. Call a
physician immediately.
First-aid measures after eye contact
:Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy
to do. Continue rinsing. Call a physician immediately.
First-aid measures after ingestion
:Rinse mouth. Do not induce vomiting. Call a physician immediately.
4.2. Most important symptoms and effects, both acute and delayed
Symptoms/effects after skin contact
:Burns. May cause an allergic skin reaction.
Symptoms/effects after eye contact
:Serious damage to eyes.
Symptoms/effects after ingestion
:Burns.
4.3. Indication of any immediate medical attention and special treatment needed
Treat symptomatically.
SECTION 5: Firefighting measures
5.1. Extinguishing media
Suitable extinguishing media
:Water spray. Dry powder. Foam. Carbon dioxide.
Unsuitable extinguishing media
:Do not use a heavy water stream.
T-Prime 130-1 Hardener
Safety Data Sheet
according to Regulation (EC) No. 1907/2006 (REACH) with its amendment Regulation (EU) 2015/830
8/4/2020 (Version: 1.10)EN (English) 3/9
5.2. Special hazards arising from the substance or mixture
Hazardous decomposition products in case of fire
:Toxic fumes may be released.
5.3. Advice for firefighters
Precautionary measures fire
:Evacuate area.
Firefighting instructions
:Exercise caution when fighting any chemical fire.
Protection during firefighting
:Do not attempt to take action without suitable protective equipment. Self-contained
breathing apparatus. Complete protective clothing.
Other information
:Collect contaminated fire fighting water seperately. It must not enter drains.
SECTION 6: Accidental release measures
6.1. Personal precautions, protective equipment and emergency procedures
6.1.1. For non-emergency personnel
Protective equipment
:Protective clothing.
Emergency procedures
:Ventilate spillage area. Avoid contact with skin, eyes and clothing. Do not breathe vapours.
6.1.2. For emergency responders
Protective equipment
:Do not attempt to take action without suitable protective equipment. For further information
refer to section 8: “Exposure controls/personal protection”.
Emergency procedures
:Ventilate area.
6.2. Environmental precautions
Avoid release to the environment. Notify authorities if liquid enters sewers or public waters.
6.3. Methods and material for containment and cleaning up
For containment
:Collect spillage.
Methods for cleaning up
:Take up liquid spill into absorbent material.
Other information
:Dispose of materials or solid residues at an authorized site.
6.4. Reference to other sections
For further information refer to section 13. For further information refer to section 8: “Exposure controls/personal protection”.
SECTION 7: Handling and storage
7.1. Precautions for safe handling
Precautions for safe handling
:Ensure good ventilation of the work station. Do not get in eyes, on skin, or on clothing. Wear
personal protective equipment. Do not breathe vapours.
Hygiene measures
:Wash contaminated clothing before reuse. Contaminated work clothing should not be
allowed out of the workplace. Do not eat, drink or smoke when using this product. Always
wash hands after handling the product. Separate working clothes from town clothes.
Launder separately. Wash hands and other exposed areas with mild soap and water before
eating, drinking or smoking and when leaving work.
7.2. Conditions for safe storage, including any incompatibilities
Storage conditions
:Store locked up. Store in a well-ventilated place. Keep cool.
Storage temperature
: 30 C Possible pressure build-up
Storage area
:Store away from heat. Store in a well-ventilated place.
Special rules on packaging
:Keep only in original container.
7.3. Specific end use(s)
No additional information available
T-Prime 130-1 Hardener
Safety Data Sheet
according to Regulation (EC) No. 1907/2006 (REACH) with its amendment Regulation (EU) 2015/830
8/4/2020 (Version: 1.10)EN (English) 4/9
SECTION 8: Exposure controls/personal protection
8.1. Control parameters
No additional information available
8.2. Exposure controls
Appropriate engineering controls:
Ensure good ventilation of the work station.
Hand protection:Protective glovesTypeMaterialPermeationThickness (mm)PenetrationStandardDisposable glovesNitrile rubber (NBR)EN ISO 374Eye protection:Safety glassesSkin and body protection:Wear suitable protective clothingTypeStandardTyvek Gown/CoverallsEN 13034Respiratory protection:In case of insufficient ventilation, wear suitable respiratory equipment. Where exposure through inhalation may occur from use, respiratory
protection equipment is recommended
Device Filter typeConditionStandardDisposable half maskGas/vapour filterVapour protectionEN 405
Personal protective equipment symbol(s):
Environmental exposure controls:
Avoid release to the environment.
Other information:
Industrial and professional. Perform risk assessment prior to use. Do not eat, drink or smoke during use.
SECTION 9: Physical and chemical properties
9.1. Information on basic physical and chemical properties
Physical state
:Liquid
Appearance
:Colorless liquid.
Colour
:clear.
Odour
:Amine-like.
Odour threshold
:No data available
pH
: 11.5
Relative evaporation rate (butylacetate=1)
:No data available
Melting point
:Not applicable
T-Prime 130-1 Hardener
Safety Data Sheet
according to Regulation (EC) No. 1907/2006 (REACH) with its amendment Regulation (EU) 2015/830
8/4/2020 (Version: 1.10)EN (English) 5/9
Freezing point
:No data available
Boiling point
:No data available
Flash point
:> 112 C
Auto-ignition temperature
:No data available
Decomposition temperature
:No data available
Flammability (solid, gas)
:Not applicable
Vapour pressure
:No data available
Relative vapour density at 20 C
:No data available
Relative density
:No data available
Density
:0.974 g/cm
Solubility
:No data available
Partition coefficient n-octanol/water (Log Pow)
:No data available
Viscosity, kinematic
:31.211 mm /s
Viscosity, dynamic
:30.4 cP
Explosive properties
:Product is not explosive.
Oxidising properties
:No data available
Explosive limits
:No data available
9.2. Other information
No additional information available
SECTION 10: Stability and reactivity
10.1. Reactivity
The product is non-reactive under normal conditions of use, storage and transport. Product is not explosive.
10.2. Chemical stability
Stable under normal conditions.
10.3. Possibility of hazardous reactions
No dangerous reactions known under normal conditions of use.
10.4. Conditions to avoid
None under recommended storage and handling conditions (see section 7).
10.5. Incompatible materials
No additional information available
10.6. Hazardous decomposition products
Under normal conditions of storage and use, hazardous decomposition products should not be produced.
SECTION 11: Toxicological information
11.1. Information on toxicological effects
Acute toxicity (oral)
:Harmful if swallowed or in contact with skin.
Acute toxicity (dermal)
:Harmful in contact with skin or if inhaled.
Acute toxicity (inhalation)
:Not classified
T-Prime 130-1 Hardener ATE CLP (oral)506.57 mg/kg bodyweightATE CLP (dermal)1114.454 mg/kg bodyweight3-aminomethyl-3,5,5-trimethylcyclohexylamine (2855-13-2)LD50 oral rat1030 mg/kg
T-Prime 130-1 Hardener
Safety Data Sheet
according to Regulation (EC) No. 1907/2006 (REACH) with its amendment Regulation (EU) 2015/830
8/4/2020 (Version: 1.10)EN (English) 6/9
LD50 dermal rat> 2000 mg/kgLC50 inhalation rat (Dust/Mist – mg/l/4h)5.01 mg/l/4h
Skin corrosion/irritation
:Causes severe skin burns.
pH: 11.5
Serious eye damage/irritation
:Causes serious eye damage.
pH: 11.5
Respiratory or skin sensitisation
:May cause an allergic skin reaction.
Germ cell mutagenicity
:Not classified
Carcinogenicity
:Not classified
Reproductive toxicity
:Not classified
STOT-single exposure
:Not classified
STOT-repeated exposure
:Not classified
Aspiration hazard
:Not classified
T-Prime 130-1 Hardener Viscosity, kinematic31.211 mm /s
SECTION 12: Ecological information
12.1. Toxicity
Ecology – general
:Harmful to aquatic life with long lasting effects.
Hazardous to the aquatic environment, short-term
(acute)
:Not classified
Hazardous to the aquatic environment, long-term
(chronic)
:Harmful to aquatic life with long lasting effects.
3-aminomethyl-3,5,5-trimethylcyclohexylamine (2855-13-2)EC50 Daphnia 114.6 21.5 mg/l (48 h – Species: Daphnia magna [semi-static])EC50 72h algae (1)37 mg/l (Species: Desmodesmus subspicatus)
12.2. Persistence and degradability
No additional information available
12.3. Bioaccumulative potential
3-aminomethyl-3,5,5-trimethylcyclohexylamine (2855-13-2)Partition coefficient n-octanol/water (Log Pow)0.79 (at 23 C)
12.4. Mobility in soil
No additional information available
12.5. Results of PBT and vPvB assessment
No additional information available
12.6. Other adverse effects
No additional information available
T-Prime 130-1 Hardener
Safety Data Sheet
according to Regulation (EC) No. 1907/2006 (REACH) with its amendment Regulation (EU) 2015/830
8/4/2020 (Version: 1.10)EN (English) 7/9
SECTION 13: Disposal considerations
13.1. Waste treatment methods
Regional legislation (waste)
:Disposal must be done according to official regulations.
Waste treatment methods
:Dispose of contents/container in accordance with licensed collector s sorting instructions.
Product/Packaging disposal recommendations
:Avoid release to the environment. Dispose in a safe manner in accordance with
local/national regulations.
Ecology – waste materials
:Avoid release to the environment.
European List of Waste (LoW) code
:08 04 09* – waste adhesives and sealants containing organic solvents or other dangerous
substances
SECTION 14: Transport information
In accordance with ADR / IATA / IMDG
ADRIMDG IATA14.1. UN numberUN 2289UN 2289 UN 228914.2. UN proper shipping nameISOPHORONEDIAMINEISOPHORONEDIAMINE IsophoronediamineTransport document descriptionUN 2289
ISOPHORONEDIAMINE, 8,
III, (E)
UN 2289
ISOPHORONEDIAMINE, 8,
III
UN 2289 Isophoronediamine, 8, III14.3. Transport hazard class(es)88 8
14.4. Packing groupIIIIII III14.5. Environmental hazardsDangerous for the
environment : No
Dangerous for the
environment : No
Marine pollutant : No
Dangerous for the environment : NoNo supplementary information available
14.6. Special precautions for user
Overland transport
Classification code (ADR)
:C7
Limited quantities (ADR)
:5l
Excepted quantities (ADR)
:E1
Packing instructions (ADR)
:P001, IBC03, LP01, R001
Mixed packing provisions (ADR)
:MP19
Portable tank and bulk container instructions (ADR)
:T4
Portable tank and bulk container special provisions
(ADR)
:TP1
Tank code (ADR)
:L4BN
Vehicle for tank carriage
:AT
Transport category (ADR)
:3
Special provisions for carriage – Packages (ADR)
:V12
T-Prime 130-1 Hardener
Safety Data Sheet
according to Regulation (EC) No. 1907/2006 (REACH) with its amendment Regulation (EU) 2015/830
8/4/2020 (Version: 1.10)EN (English) 8/9
Hazard identification number (Kemler No.)
:80
Orange plates
:
Tunnel restriction code (ADR)
:E
EAC code
:2X
Transport by sea
Limited quantities (IMDG)
:5 L
Excepted quantities (IMDG)
:E1
Packing instructions (IMDG)
:P001, LP01
IBC packing instructions (IMDG)
:IBC03
Tank instructions (IMDG)
:T4
Tank special provisions (IMDG)
:TP1
EmS-No. (Fire)
:F-A
EmS-No. (Spillage)
:S-B
Stowage category (IMDG)
:A
Properties and observations (IMDG)
:Colourless, slightly hygroscopic liquid with a slight amine odour. Combustible. Miscible with
water. Harmful if swallowed. Irritating to skin, eyes and mucous membranes.
Air transport
PCA Excepted quantities (IATA)
:E1
PCA Limited quantities (IATA)
:Y841
PCA limited quantity max net quantity (IATA)
:1L
PCA packing instructions (IATA)
:852
PCA max net quantity (IATA)
:5L
CAO packing instructions (IATA)
:856
CAO max net quantity (IATA)
:60L
ERG code (IATA)
:8L
14.7. Transport in bulk according to Annex II of Marpol and the IBC Code
Not applicable
SECTION 15: Regulatory information
15.1. Safety, health and environmental regulations/legislation specific for the substance or mixture
15.1.1. EU-Regulations
Contains no REACH substances with Annex XVII restrictions
Contains no substance on the REACH candidate list
Contains no REACH Annex XIV substances
Contains no substance subject to Regulation (EU) No 649/2012 of the European Parliament and of the Council of 4 July 2012 concerning the export
and import of hazardous chemicals.
Contains no substance subject to Regulation (EU) No 2019/1021 of the European Parliament and of the Council of 20 June 2019 on persistent
organic pollutants
15.1.2. National regulations
No additional information available
15.2. Chemical safety assessment
No chemical safety assessment has been carried out
SECTION 16: Other information
Full text of H- and EUH-statements:Acute Tox. 4 (Dermal)Acute toxicity (dermal), Category 4Acute Tox. 4 (Oral)Acute toxicity (oral), Category 4Aquatic Chronic 3Hazardous to the aquatic environment Chronic Hazard, Category 3
T-Prime 130-1 Hardener
Safety Data Sheet
according to Regulation (EC) No. 1907/2006 (REACH) with its amendment Regulation (EU) 2015/830
8/4/2020 (Version: 1.10)EN (English) 9/9
Skin Corr. 1BSkin corrosion/irritation, Category 1, Sub-Category 1BSkin Sens. 1Skin sensitisation, Category 1H302Harmful if swallowed.H312Harmful in contact with skin.H314Causes severe skin burns and eye damage.H317May cause an allergic skin reaction.H318Causes serious eye damage.H412Harmful to aquatic life with long lasting effects.Classification and procedure used to derive the classification for mixtures according to Regulation (EC) 1272/2008 [CLP]:Acute Tox. 4 (Oral)H302Calculation methodAcute Tox. 4 (Dermal)H312Calculation methodSkin Corr. 1BH314Calculation methodEye Dam. 1H318Calculation methodSkin Sens. 1H317Calculation methodAquatic Chronic 3H412Calculation method
SDS EU (REACH Annex II)
This information is based on our current knowledge and is intended to describe the product for the purposes of health, safety and environmental
requirements only. It should not therefore be construed as guaranteeing any specific property of the product The information contained within this
document is Gurit copyright and any distribution or publication beyond the recipient’s organisation is prohibited without Gurit’s prior written consent.
by | Sep 27, 2025
T-Prime 130-1 Resin
Safety Data Sheet
according to Regulation (EC) No. 1907/2006 (REACH) with its amendment Regulation (EU) 2015/830
Issue date: 5/27/2015 Revision date: 8/4/2020 Supersedes: 8/23/2018 Version: 3.5
8/4/2020 (Version: 3.5)EN (English) 1/10
SECTION 1: Identification of the substance/mixture and of the company/undertaking
1.1. Product identifier
Product form
:Mixture
Name
:T-Prime 130-1 Resin
Type of product
:Epoxy resin
Product group
:Resin
1.2. Relevant identified uses of the substance or mixture and uses advised against
1.2.1. Relevant identified uses
Main use category
:Industrial use
Industrial/Professional use spec
:For professional use only
1.2.2. Uses advised against
No additional information available
1.3. Details of the supplier of the safety data sheet
1.4. Emergency telephone number
Emergency number
:Carechem 24: +44 (0) 1273 289451 24 Hours
Telephone number for use in case of chemical exposure, spillage or fire only.
SECTION 2: Hazards identification
2.1. Classification of the substance or mixture
Classification according to Regulation (EC) No. 1272/2008 [CLP]
Skin corrosion/irritation, Category 2
H315
Serious eye damage/eye irritation, Category 1
H318
Skin sensitisation, Category 1
H317
Hazardous to the aquatic environment Chronic Hazard, Category 2
H411
Full text of H statements : see section 16
Adverse physicochemical, human health and environmental effects
Causes skin irritation. May cause an allergic skin reaction. Causes serious eye damage. Toxic to aquatic life with long lasting effects.
2.2. Label elements
Labelling according to Regulation (EC) No. 1272/2008 [CLP]
Hazard pictograms (CLP)
: GHS05 GHS07 GHS09
Signal word (CLP)
:Danger
Hazardous ingredients
:Formaldehyde, polymer with 2-(chloromethyl)oxirane and phenol; Oxirane, 2,2′-[1,4-
cyclohexanedilbis (methyleneoxymethylene)]bis-; 1,4-bis(2,3 epoxypropoxy)butane;
butanedioldiglycidyl ether; reaction product: bisphenol-A-(epichlorhydrin); epoxy resin
(number average molecular weight 700)
Gurit (UK) Ltd
St Cross Business Park
Newport
PO30 5WU Isle of Wight – United Kingdom
T +44 (0) 1983 828 000 (All Technical and Commercial Enquiries)
Regulatory@gurit.com – www.gurit.com
T-Prime 130-1 Resin
Safety Data Sheet
according to Regulation (EC) No. 1907/2006 (REACH) with its amendment Regulation (EU) 2015/830
8/4/2020 (Version: 3.5)EN (English) 2/10
Hazard statements (CLP)
:H315 – Causes skin irritation.
H317 – May cause an allergic skin reaction.
H318 – Causes serious eye damage.
H411 – Toxic to aquatic life with long lasting effects.
Precautionary statements (CLP)
:P261 – Avoid breathing vapours.
P264 – Wash hands thoroughly after handling.
P272 – Contaminated work clothing should not be allowed out of the workplace.
P273 – Avoid release to the environment.
P280 – Wear eye protection, protective clothing, protective gloves.
P302+P352 – IF ON SKIN: Wash with plenty of water.
2.3. Other hazards
No additional information available
SECTION 3: Composition/information on ingredients
3.1. Substances
Not applicable
3.2. Mixtures
NameProduct identifier%Classification according to
Regulation (EC) No.
1272/2008 [CLP]
reaction product: bisphenol-A-(epichlorhydrin); epoxy
resin (number average molecular weight 700)
(CAS-No.) 1675-54-3
(EC-No.) 500-033-5
(EC Index-No.) 603-074-00-8
(REACH-no) 01-2119456619-26
50Skin Irrit. 2, H315
Eye Irrit. 2, H319
Skin Sens. 1, H317
Aquatic Chronic 2, H411
Formaldehyde, polymer with 2-(chloromethyl)oxirane
and phenol
(CAS-No.) 9003-36-5
(EC-No.) 500-006-8
(REACH-no) 01-2119454392-40
10 25Skin Irrit. 2, H315
Skin Sens. 1, H317
Aquatic Acute Not classified
Aquatic Chronic 2, H411
1,4-bis(2,3 epoxypropoxy)butane; butanedioldiglycidyl
ether
(CAS-No.) 2425-79-8
(EC-No.) 219-371-7
(EC Index-No.) 603-072-00-7
(REACH-no) 01-2119494060-45
10 25Acute Tox. 4 (Oral), H302
Acute Tox. 4 (Dermal), H312
Acute Tox. 4 (Inhalation), H332
Acute Tox. 4 (Inhalation:vapour),
H332
Skin Irrit. 2, H315
Eye Dam. 1, H318
Skin Sens. 1, H317
Aquatic Chronic 3, H412
Oxirane, 2,2′-[1,4-cyclohexanedilbis
(methyleneoxymethylene)]bis-
(CAS-No.) 14228-73-0
(EC-No.) 238-098-4
3 5Skin Irrit. 2, H315
Eye Irrit. 2, H319
Skin Sens. 1, H317
Aquatic Chronic 3, H412
Specific concentration limits:NameProduct identifierSpecific concentration limitsreaction product: bisphenol-A-(epichlorhydrin); epoxy
resin (number average molecular weight 700)
(CAS-No.) 1675-54-3
(EC-No.) 500-033-5
(EC Index-No.) 603-074-00-8
(REACH-no) 01-2119456619-26
( 5 C < 100) Skin Irrit. 2, H315
( 5 C < 100) Eye Irrit. 2, H319
Full text of H-statements: see section 16
T-Prime 130-1 Resin
Safety Data Sheet
according to Regulation (EC) No. 1907/2006 (REACH) with its amendment Regulation (EU) 2015/830
8/4/2020 (Version: 3.5)EN (English) 3/10
SECTION 4: First aid measures
4.1. Description of first aid measures
First-aid measures after inhalation
:Remove person to fresh air and keep comfortable for breathing.
First-aid measures after skin contact
:Wash skin with plenty of water. Take off contaminated clothing. If skin irritation or rash
occurs: Get medical advice/attention.
First-aid measures after eye contact
:Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy
to do. Continue rinsing. Call a physician immediately.
First-aid measures after ingestion
:Call a poison center or a doctor if you feel unwell.
4.2. Most important symptoms and effects, both acute and delayed
Symptoms/effects after skin contact
:Irritation. May cause an allergic skin reaction.
Symptoms/effects after eye contact
:Serious damage to eyes.
4.3. Indication of any immediate medical attention and special treatment needed
Treat symptomatically.
SECTION 5: Firefighting measures
5.1. Extinguishing media
Suitable extinguishing media
:Water spray. Dry powder. Foam. Carbon dioxide.
Unsuitable extinguishing media
:Do not use a heavy water stream.
5.2. Special hazards arising from the substance or mixture
Hazardous decomposition products in case of fire
:Toxic fumes may be released.
5.3. Advice for firefighters
Protection during firefighting
:Do not attempt to take action without suitable protective equipment. Self-contained
breathing apparatus. Complete protective clothing.
Other information
:Collect contaminated fire fighting water seperately. It must not enter drains.
SECTION 6: Accidental release measures
6.1. Personal precautions, protective equipment and emergency procedures
6.1.1. For non-emergency personnel
Emergency procedures
:Ventilate spillage area. Avoid contact with skin and eyes. Avoid breathing vapours.
6.1.2. For emergency responders
Protective equipment
:Do not attempt to take action without suitable protective equipment. For further information
refer to section 8: "Exposure controls/personal protection".
Emergency procedures
:Ventilate area.
6.2. Environmental precautions
Avoid release to the environment. Notify authorities if liquid enters sewers or public waters.
6.3. Methods and material for containment and cleaning up
For containment
:Collect spillage.
Methods for cleaning up
:Take up liquid spill into absorbent material.
Other information
:Dispose of materials or solid residues at an authorized site.
6.4. Reference to other sections
For further information refer to section 13. For further information refer to section 8: "Exposure controls/personal protection".
T-Prime 130-1 Resin
Safety Data Sheet
according to Regulation (EC) No. 1907/2006 (REACH) with its amendment Regulation (EU) 2015/830
8/4/2020 (Version: 3.5)EN (English) 4/10
SECTION 7: Handling and storage
7.1. Precautions for safe handling
Precautions for safe handling
:Ensure good ventilation of the work station. Avoid contact with skin and eyes. Wear
personal protective equipment. Avoid breathing vapours.
Hygiene measures
:Wash contaminated clothing before reuse. Contaminated work clothing should not be
allowed out of the workplace. Do not eat, drink or smoke when using this product. Always
wash hands after handling the product. Separate working clothes from town clothes.
Launder separately. Wash hands and other exposed areas with mild soap and water before
eating, drinking or smoking and when leaving work.
7.2. Conditions for safe storage, including any incompatibilities
Storage conditions
:Store in a well-ventilated place. Keep cool.
Maximum storage period
:2 year
Storage temperature
: 30 C Storage at elevated temperatures may cause pressure build-up in sealed containers
Storage area
:Store away from heat. Store in a well-ventilated place.
Special rules on packaging
:Keep only in original container.
7.3. Specific end use(s)
No additional information available
SECTION 8: Exposure controls/personal protection
8.1. Control parameters
No additional information available
8.2. Exposure controls
Appropriate engineering controls:
Ensure good ventilation of the work station.
Hand protection:Protective glovesTypeMaterialPermeationThickness (mm)PenetrationStandardDisposable glovesNitrile rubber (NBR)EN ISO 374Eye protection:Safety glassesSkin and body protection:Wear suitable protective clothingTypeStandardTyvek Gown/CoverallsEN 13034Respiratory protection:In case of insufficient ventilation, wear suitable respiratory equipment. Where exposure through inhalation may occur from use, respiratory
protection equipment is recommended
Device Filter typeConditionStandardDisposable half maskGas/vapour filterVapour protectionEN 405
T-Prime 130-1 Resin
Safety Data Sheet
according to Regulation (EC) No. 1907/2006 (REACH) with its amendment Regulation (EU) 2015/830
8/4/2020 (Version: 3.5)EN (English) 5/10
Personal protective equipment symbol(s):
Environmental exposure controls:
Avoid release to the environment.
Other information:
Industrial and professional. Perform risk assessment prior to use. Do not eat, drink or smoke when using this product.
SECTION 9: Physical and chemical properties
9.1. Information on basic physical and chemical properties
Physical state
:Liquid
Appearance
:Liquid.
Colour
:clear.
Odour
:characteristic.
Odour threshold
:No data available
pH
: 7
Relative evaporation rate (butylacetate=1)
:No data available
Melting point
:Not applicable
Freezing point
:No data available
Boiling point
:No data available
Flash point
:> 100 C estimated
Auto-ignition temperature
:No data available
Decomposition temperature
:No data available
Flammability (solid, gas)
:Not applicable
Vapour pressure
:No data available
Relative vapour density at 20 C
:No data available
Relative density
:No data available
Density
:1.15 g/cm
Solubility
:No data available
Partition coefficient n-octanol/water (Log Pow)
:No data available
Viscosity, kinematic
:798.261 mm /s
Viscosity, dynamic
:918 cP
Explosive properties
:Product is not explosive.
Oxidising properties
:No data available
Explosive limits
:No data available
9.2. Other information
No additional information available
SECTION 10: Stability and reactivity
10.1. Reactivity
The product is non-reactive under normal conditions of use, storage and transport. Product is not explosive.
10.2. Chemical stability
Stable under normal conditions.
10.3. Possibility of hazardous reactions
No dangerous reactions known under normal conditions of use.
10.4. Conditions to avoid
None under recommended storage and handling conditions (see section 7).
T-Prime 130-1 Resin
Safety Data Sheet
according to Regulation (EC) No. 1907/2006 (REACH) with its amendment Regulation (EU) 2015/830
8/4/2020 (Version: 3.5)EN (English) 6/10
10.5. Incompatible materials
No additional information available
10.6. Hazardous decomposition products
Under normal conditions of storage and use, hazardous decomposition products should not be produced.
SECTION 11: Toxicological information
11.1. Information on toxicological effects
Acute toxicity (oral)
:Not classified
Acute toxicity (dermal)
:Not classified
Acute toxicity (inhalation)
:Not classified
Formaldehyde, polymer with 2-(chloromethyl)oxirane and phenol (9003-36-5)LD50 oral rat> 10000 mg/kgLD50 dermal rat> 2000 mg/kg1,4-bis(2,3 epoxypropoxy)butane; butanedioldiglycidyl ether (2425-79-8)LD50 oral rat1163 mg/kgreaction product: bisphenol-A-(epichlorhydrin); epoxy resin (number average molecular weight 700) (1675-54-3)LD50 oral rat11400 mg/kg
Skin corrosion/irritation
:Causes skin irritation.
pH: 7
Serious eye damage/irritation
:Causes serious eye damage.
pH: 7
Respiratory or skin sensitisation
:May cause an allergic skin reaction.
Germ cell mutagenicity
:Not classified
Carcinogenicity
:Not classified
reaction product: bisphenol-A-(epichlorhydrin); epoxy resin (number average molecular weight 700) (1675-54-3)IARC group3 – Not classifiable
Reproductive toxicity
:Not classified
STOT-single exposure
:Not classified
STOT-repeated exposure
:Not classified
Aspiration hazard
:Not classified
T-Prime 130-1 Resin Viscosity, kinematic798.261 mm /s
SECTION 12: Ecological information
12.1. Toxicity
Ecology – general
:Toxic to aquatic life with long lasting effects.
Hazardous to the aquatic environment, short-term
(acute)
:Not classified
T-Prime 130-1 Resin
Safety Data Sheet
according to Regulation (EC) No. 1907/2006 (REACH) with its amendment Regulation (EU) 2015/830
8/4/2020 (Version: 3.5)EN (English) 7/10
Hazardous to the aquatic environment, long-term
(chronic)
:Toxic to aquatic life with long lasting effects.
Formaldehyde, polymer with 2-(chloromethyl)oxirane and phenol (9003-36-5)LC50 fish 1< 1 mg/lreaction product: bisphenol-A-(epichlorhydrin); epoxy resin (number average molecular weight 700) (1675-54-3)LC50 fish 11.5 mg/lLC50 fish 22 mg/l
12.2. Persistence and degradability
reaction product: bisphenol-A-(epichlorhydrin); epoxy resin (number average molecular weight 700) (1675-54-3)Persistence and degradabilityMay cause long-term adverse effects in the environment.
12.3. Bioaccumulative potential
reaction product: bisphenol-A-(epichlorhydrin); epoxy resin (number average molecular weight 700) (1675-54-3)Bioaccumulative potentialNot established.
12.4. Mobility in soil
No additional information available
12.5. Results of PBT and vPvB assessment
No additional information available
12.6. Other adverse effects
No additional information available
SECTION 13: Disposal considerations
13.1. Waste treatment methods
Regional legislation (waste)
:Disposal must be done according to official regulations.
Waste treatment methods
:Dispose of contents/container in accordance with licensed collector s sorting instructions.
Product/Packaging disposal recommendations
:Avoid release to the environment. Dispose in a safe manner in accordance with
local/national regulations.
Ecology - waste materials
:Avoid release to the environment.
European List of Waste (LoW) code
:08 04 09* - waste adhesives and sealants containing organic solvents or other dangerous
substances
SECTION 14: Transport information
In accordance with ADR / IATA / IMDG
ADRIMDG IATA14.1. UN numberUN 3082UN 3082 UN 308214.2. UN proper shipping nameENVIRONMENTALLY
HAZARDOUS
SUBSTANCE, LIQUID,
N.O.S.
ENVIRONMENTALLY
HAZARDOUS
SUBSTANCE, LIQUID,
N.O.S.
Environmentally hazardous substance, liquid, n.o.s.
T-Prime 130-1 Resin
Safety Data Sheet
according to Regulation (EC) No. 1907/2006 (REACH) with its amendment Regulation (EU) 2015/830
8/4/2020 (Version: 3.5)EN (English) 8/10
Transport document descriptionUN 3082
ENVIRONMENTALLY
HAZARDOUS
SUBSTANCE, LIQUID,
N.O.S. (Formaldehyde,
polymer with
(chloromethyl)oxirane and
phenol), 9, III, (-)
UN 3082
ENVIRONMENTALLY
HAZARDOUS
SUBSTANCE, LIQUID,
N.O.S. (Formaldehyde,
polymer with
(chloromethyl)oxirane and
phenol), 9, III, MARINE
POLLUTANT
UN 3082 Environmentally hazardous substance, liquid, n.o.s. (Formaldehyde, polymer
with (chloromethyl)oxirane and phenol), 9, III
14.3. Transport hazard class(es)99 9
14.4. Packing groupIIIIII III14.5. Environmental hazardsDangerous for the
environment : Yes
Dangerous for the
environment : Yes
Marine pollutant : Yes
Dangerous for the environment : YesNo supplementary information available
14.6. Special precautions for user
Overland transport
Classification code (ADR)
:M6
Special provisions (ADR)
:274, 335, 375, 601
Limited quantities (ADR)
:5l
Excepted quantities (ADR)
:E1
Packing instructions (ADR)
:P001, IBC03, LP01, R001
Special packing provisions (ADR)
:PP1
Mixed packing provisions (ADR)
:MP19
Portable tank and bulk container instructions (ADR)
:T4
Portable tank and bulk container special provisions
(ADR)
:TP1, TP29
Tank code (ADR)
:LGBV
Vehicle for tank carriage
:AT
Transport category (ADR)
:3
Special provisions for carriage - Packages (ADR)
:V12
Special provisions for carriage - Loading, unloading
and handling (ADR)
:CV13
Hazard identification number (Kemler No.)
:90
Orange plates
:
Tunnel restriction code (ADR)
:-
EAC code
: 3Z
Transport by sea
Special provisions (IMDG)
:274, 335, 969
Limited quantities (IMDG)
:5 L
Excepted quantities (IMDG)
:E1
Packing instructions (IMDG)
:LP01, P001
Special packing provisions (IMDG)
:PP1
IBC packing instructions (IMDG)
:IBC03
T-Prime 130-1 Resin
Safety Data Sheet
according to Regulation (EC) No. 1907/2006 (REACH) with its amendment Regulation (EU) 2015/830
8/4/2020 (Version: 3.5)EN (English) 9/10
Tank instructions (IMDG)
:T4
Tank special provisions (IMDG)
:TP2, TP29
EmS-No. (Fire)
:F-A
EmS-No. (Spillage)
:S-F
Stowage category (IMDG)
:A
Air transport
PCA Excepted quantities (IATA)
:E1
PCA Limited quantities (IATA)
:Y964
PCA limited quantity max net quantity (IATA)
:30kgG
PCA packing instructions (IATA)
:964
PCA max net quantity (IATA)
:450L
CAO packing instructions (IATA)
:964
CAO max net quantity (IATA)
:450L
Special provisions (IATA)
:A97, A158, A197
ERG code (IATA)
:9L
14.7. Transport in bulk according to Annex II of Marpol and the IBC Code
Not applicable
SECTION 15: Regulatory information
15.1. Safety, health and environmental regulations/legislation specific for the substance or mixture
15.1.1. EU-Regulations
Contains no REACH substances with Annex XVII restrictions
Contains no substance on the REACH candidate list
Contains no REACH Annex XIV substances
Contains no substance subject to Regulation (EU) No 649/2012 of the European Parliament and of the Council of 4 July 2012 concerning the export
and import of hazardous chemicals.
Contains no substance subject to Regulation (EU) No 2019/1021 of the European Parliament and of the Council of 20 June 2019 on persistent
organic pollutants
15.1.2. National regulations
No additional information available
15.2. Chemical safety assessment
No chemical safety assessment has been carried out
SECTION 16: Other information
Full text of H- and EUH-statements:Acute Tox. 4 (Dermal)Acute toxicity (dermal), Category 4Acute Tox. 4 (Inhalation)Acute toxicity (inhal.), Category 4Acute Tox. 4 (Inhalation:vapour)Acute toxicity (inhalation:vapour) Category 4Acute Tox. 4 (Oral)Acute toxicity (oral), Category 4Aquatic Acute Not classifiedHazardous to the aquatic environment - Acute Hazard Not classifiedAquatic Chronic 2Hazardous to the aquatic environment Chronic Hazard, Category 2Aquatic Chronic 3Hazardous to the aquatic environment Chronic Hazard, Category 3Eye Dam. 1Serious eye damage/eye irritation, Category 1Eye Irrit. 2Serious eye damage/eye irritation, Category 2Skin Irrit. 2Skin corrosion/irritation, Category 2Skin Sens. 1Skin sensitisation, Category 1H302Harmful if swallowed.
T-Prime 130-1 Resin
Safety Data Sheet
according to Regulation (EC) No. 1907/2006 (REACH) with its amendment Regulation (EU) 2015/830
8/4/2020 (Version: 3.5)EN (English) 10/10
H312Harmful in contact with skin.H315Causes skin irritation.H317May cause an allergic skin reaction.H318Causes serious eye damage.H319Causes serious eye irritation.H332Harmful if inhaled.H411Toxic to aquatic life with long lasting effects.H412Harmful to aquatic life with long lasting effects.Classification and procedure used to derive the classification for mixtures according to Regulation (EC) 1272/2008 [CLP]:Skin Irrit. 2H315Calculation methodEye Dam. 1H318Calculation methodSkin Sens. 1H317Calculation methodAquatic Chronic 2H411Calculation method
SDS EU (REACH Annex II)
This information is based on our current knowledge and is intended to describe the product for the purposes of health, safety and environmental
requirements only. It should not therefore be construed as guaranteeing any specific property of the product The information contained within this
document is Gurit copyright and any distribution or publication beyond the recipient's organisation is prohibited without Gurit's prior written consent.
by | Sep 27, 2025
by | Sep 27, 2025
Page 1/12
Safety Data Sheet
acc. to OSHA HCS
Printing date 01/07/2020 Reviewed on 01/07/2020
50.0
1 Identification
Product identifier
Trade name: P34 Brown
Article number:I034088
Application of the substance / the mixtureModel board filler
Details of the supplier of the safety data sheet
Sika Advanced Resins, US
EHS Department
Manufacturer/Supplier:
Supplier’s Name: Sika Advanced Resins, US
Headquarters:
30800 Stephenson Hwy
Madison Heights, MI 48071
USA
advancedresins.ehs@us.sika.com
Information department:Product safety department
Emergency telephone number:
During normal opening times: +1 (248) 588-2270
CHEMTREC 24-hour Emergency: +1 (800) 424-9300
* 2 Hazard(s) identification
Classification of the substance or mixture
GHS02 Flame
Flam. Liq. 3 H226 Flammable liquid and vapor.
GHS08 Health hazard
Carc. 2 H351 Suspected of causing cancer.
Repr. 2 H361 Suspected of damaging fertility or the unborn child.
STOT RE 1 H372 Causes damage to the hearing organs through prolonged or repeated exposure.
GHS07
Skin Irrit. 2 H315 Causes skin irritation.
Eye Irrit. 2A H319 Causes serious eye irritation.
Label elements
GHS label elementsThe product is classified and labeled according to the Globally Harmonized System (GHS).
(Contd. on page 2) US
Page 2/12
Safety Data Sheet
acc. to OSHA HCS
Printing date 01/07/2020 Reviewed on 01/07/2020
Trade name: P34 Brown
(Contd. of page 1)
50.0
Hazard pictograms
GHS02GHS07GHS08
Signal wordDanger
Hazard-determining components of labeling:
Styrene
Hazard statements
Flammable liquid and vapor.
Causes skin irritation.
Causes serious eye irritation.
Suspected of causing cancer.
Suspected of damaging fertility or the unborn child.
Causes damage to the hearing organs through prolonged or repeated exposure.
Precautionary statements
Avoid breathing dust/fume/gas/mist/vapors/spray
Keep away from heat/sparks/open flames/hot surfaces. – No smoking.
Ground/bond container and receiving equipment.
Use explosion-proof electrical/ventilating/lighting/equipment.
Do not breathe dust/fume/gas/mist/vapors/spray.
Wear protective gloves/protective clothing/eye protection/face protection.
If on skin (or hair): Take off immediately all contaminated clothing. Rinse skin with water/shower.
If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do.
Continue rinsing.
Store in a well-ventilated place. Keep cool.
Store locked up.
Dispose of contents/container in accordance with local/regional/national/international regulations.
Classification system:
NFPA ratings (scale 0 – 4)
2
2
0
Health = 2
Fire = 2
Reactivity = 0
HMIS-ratings (scale 0 – 4)
HEALTH
FIRE
REACTIVITY
*2
2
0
Health = *2
Fire = 2
Reactivity = 0
Other hazards
Results of PBT and vPvB assessment
PBT:Not applicable.
(Contd. on page 3)
US
Page 3/12
Safety Data Sheet
acc. to OSHA HCS
Printing date 01/07/2020 Reviewed on 01/07/2020
Trade name: P34 Brown
(Contd. of page 2)
50.0
vPvB:Not applicable.
* 3 Composition/information on ingredients
Chemical characterization: Mixtures
Description:Mixture of the substances listed below with nonhazardous additions.
Dangerous components:
CAS: 25013-15-4
EINECS: 246-562-2
Vinyl toluene 10-20%
CAS: 100-42-5
EINECS: 202-851-5
Styrene 5-<10%
CAS: 91-99-6 N,N-Bishydroxyethyl-m-toluidine 0.1-1%
* 4 First-aid measures
Description of first aid measures
General information:
Immediately remove any clothing soiled by the product.
Symptoms of poisoning may even occur after several hours; therefore medical observation for at least 48 hours
after the accident.
After inhalation:In case of unconsciousness place patient stably in side position for transportation.
After skin contact:Immediately wash with water and soap and rinse thoroughly.
After eye contact:
Rinse opened eye for several minutes under running water. If symptoms persist, consult a doctor.
After swallowing:If symptoms persist consult doctor.
Information for doctor:
Most important symptoms and effects, both acute and delayedNo further relevant information available.
Indication of any immediate medical attention and special treatment needed
No further relevant information available.
* 5 Fire-fighting measures
Extinguishing media
Suitable extinguishing agents:
CO2, extinguishing powder or water spray. Fight larger fires with water spray or alcohol resistant foam.
Special hazards arising from the substance or mixture
During heating or in case of fire poisonous gases are produced.
Advice for firefighters
Protective equipment:
Mouth respiratory protective device.
Wear self-contained respiratory protective device.
(Contd. on page 4)
US
Page 4/12
Safety Data Sheet
acc. to OSHA HCS
Printing date 01/07/2020 Reviewed on 01/07/2020
Trade name: P34 Brown
(Contd. of page 3)
50.0
Additional information
Dispose of fire debris and contaminated fire fighting water in accordance with official regulations.
* 6 Accidental release measures
Personal precautions, protective equipment and emergency procedures
Mount respiratory protective device.
Wear protective equipment. Keep unprotected persons away.
Environmental precautions:Prevent seepage into sewage system, workpits and cellars.
Methods and material for containment and cleaning up:
Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust).
Dispose contaminated material as waste according to item 13.
Ensure adequate ventilation.
Reference to other sections
See Section 7 for information on safe handling.
See Section 8 for information on personal protection equipment.
See Section 13 for disposal information.
Protective Action Criteria for Chemicals
PAC-1:
100-42-5 Styrene 20 ppm
PAC-2:
100-42-5 Styrene 130 ppm
PAC-3:
100-42-5 Styrene 1100* ppm
* 7 Handling and storage
Handling:
Precautions for safe handling
Ensure good ventilation/exhaustion at the workplace.
Open and handle receptacle with care.
Prevent formation of aerosols.
Information about protection against explosions and fires:
Keep ignition sources away - Do not smoke.
Protect against electrostatic charges.
Keep respiratory protective device available.
Conditions for safe storage, including any incompatibilities
Storage:
Requirements to be met by storerooms and receptacles:No special requirements.
Information about storage in one common storage facility:Not required.
Further information about storage conditions:Keep receptacle tightly sealed.
(Contd. on page 5)
US
Page 5/12
Safety Data Sheet
acc. to OSHA HCS
Printing date 01/07/2020 Reviewed on 01/07/2020
Trade name: P34 Brown
(Contd. of page 4)
50.0
Specific end use(s)No further relevant information available.
* 8 Exposure controls/personal protection
Additional information about design of technical systems:No further data; see item 7.
Control parameters
Components with limit values that require monitoring at the workplace:
The following constituents are the only constituents of the product which have a PEL, TLV or other recommended
exposure limit.
At this time, the remaining constituent has no known exposure limits.
25013-15-4 Vinyl toluene
PEL Long-term value: 480 mg/m , 100 ppm
REL Long-term value: 480 mg/m , 100 ppm
TLV Short-term value: 483 mg/m , 100 ppm
Long-term value: 242 mg/m , 50 ppm
100-42-5 Styrene
ACGIH TLV Short-term value: 170 at 40 ppm mg/m
Long-term value: 85 at 20 ppm mg/m
OSHA PEL Long-term value: 100 ppm mg/m
Ceiling limit value: 200 ppm mg/m
PEL Long-term value: 100 ppm
Ceiling limit value: 200; 600* ppm
*5-min peak in any 3 hrs
REL Short-term value: 425 mg/m , 100 ppm
Long-term value: 215 mg/m , 50 ppm
TLV Short-term value: (170) mg/m , (40) NIC-20 ppm
Long-term value: (85) mg/m , (20) NIC-10 ppm
BEI, NIC-A3, NIC-OTO
Additional information:The lists that were valid during the creation were used as basis.
Exposure controls
Personal protective equipment:
General protective and hygienic measures:
Keep away from foodstuffs, beverages and feed.
Immediately remove all soiled and contaminated clothing.
Wash hands before breaks and at the end of work.
Store protective clothing separately.
Avoid contact with the eyes and skin.
Breathing equipment:
In case of brief exposure or low pollution use respiratory filter device. In case of intensive or longer exposure use
respiratory protective device that is independent of circulating air.
(Contd. on page 6)
US
Page 6/12
Safety Data Sheet
acc. to OSHA HCS
Printing date 01/07/2020 Reviewed on 01/07/2020
Trade name: P34 Brown
(Contd. of page 5)
50.0
Protection of hands:
Protective gloves
The glove material has to be impermeable and resistant to the product/ the substance/ the preparation.
Due to missing tests no recommendation to the glove material can be given for the product/ the preparation/ the
chemical mixture.
Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation
Material of gloves
The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and
varies from manufacturer to manufacturer. As the product is a preparation of several substances, the resistance of
the glove material can not be calculated in advance and has therefore to be checked prior to the application.
Penetration time of glove material
The exact break through time has to be found out by the manufacturer of the protective gloves and has to be
observed.
Eye protection:
Tightly sealed goggles
* 9 Physical and chemical properties
Information on basic physical and chemical properties
General Information
Appearance:
Form: Thixotropic Paste
Color: Brown
Odor: Pungent
Odor threshold: Not determined.
pH-value: Not determined.
Change in condition
Melting point/Melting range:Undetermined.
Boiling point/Boiling range:145 C (293 F)
Flash point: 53 C (127.4 F)
Flammability (solid, gaseous):Not applicable.
Ignition temperature: 490 C (914 F)
Decomposition temperature: Not determined.
(Contd. on page 7)
US
Page 7/12
Safety Data Sheet
acc. to OSHA HCS
Printing date 01/07/2020 Reviewed on 01/07/2020
Trade name: P34 Brown
(Contd. of page 6)
50.0
Auto igniting: Product is not selfigniting.
Danger of explosion: Product is not explosive. However, formation of explosive air/vapor
mixtures are possible.
Explosion limits:
Lower: Not determined.
Upper: Not determined.
Vapor pressure: Not determined.
Density at 20 C (68 F): 0.63 g/cm (5.26 lbs/gal)
Relative density Not determined.
Vapor density Not determined.
Evaporation rate Not determined.
Solubility in / Miscibility with
Water: Not miscible or difficult to mix.
Partition coefficient (n-octanol/water):Not determined.
Viscosity:
Dynamic: Not determined.
Kinematic: Not determined.
Solvent content:
Organic solvents: 19.7 %
VOC content: 28.41 %
179.0 g/l / 1.49 lb/gal
Solids content: 18.5 %
Other information No further relevant information available.
* 10 Stability and reactivity
ReactivityNo further relevant information available.
Chemical stability
Thermal decomposition / conditions to be avoided:No decomposition if used according to specifications.
Possibility of hazardous reactionsNo dangerous reactions known.
Conditions to avoidNo further relevant information available.
Incompatible materials:No further relevant information available.
Hazardous decomposition products:Carbon monoxide and carbon dioxide
US
(Contd. on page 8)
Page 8/12
Safety Data Sheet
acc. to OSHA HCS
Printing date 01/07/2020 Reviewed on 01/07/2020
Trade name: P34 Brown
(Contd. of page 7)
50.0
* 11 Toxicological information
Information on toxicological effects
Acute toxicity:
LD/LC50 values that are relevant for classification:
100-42-5 Styrene
Oral LD50 >2,000 mg/kg (rat)
Dermal LD50 >2,000 mg/kg (rat)
Inhalative LC50/4 h 11.8 mg/l (rat)
Primary irritant effect:
on the skin:Irritant to skin and mucous membranes.
on the eye:Irritating effect.
Sensitization:No sensitizing effects known.
Additional toxicological information:
The product shows the following dangers according to internally approved calculation methods for preparations:
Irritant
Carcinogenic categories
IARC (International Agency for Research on Cancer)
25013-15-4 Vinyl toluene 3
100-42-5 Styrene 2B
Red Iron Oxide 3
64-17-5 ethanol 1
7631-86-9 silicon dioxide, chemically prepared 3
13463-67-7 titanium dioxide 2B
NTP (National Toxicology Program)
None of the ingredients is listed.
OSHA-Ca (Occupational Safety & Health Administration)
None of the ingredients is listed.
12 Ecological information
Toxicity
Aquatic toxicity:No further relevant information available.
Persistence and degradabilityNo further relevant information available.
Behavior in environmental systems:
Bioaccumulative potentialNo further relevant information available.
Mobility in soilNo further relevant information available.
Additional ecological information:
General notes:Not hazardous for water.
(Contd. on page 9)
US
Page 9/12
Safety Data Sheet
acc. to OSHA HCS
Printing date 01/07/2020 Reviewed on 01/07/2020
Trade name: P34 Brown
(Contd. of page 8)
50.0
Results of PBT and vPvB assessment
PBT:Not applicable.
vPvB:Not applicable.
Other adverse effectsNo further relevant information available.
13 Disposal considerations
Waste treatment methods
Recommendation:
Must not be disposed of together with household garbage. Do not allow product to reach sewage system.
Uncleaned packagings:
Recommendation:Disposal must be made according to official regulations.
14 Transport information
UN-Number
DOT, IMDG, IATA UN1866
UN proper shipping name
DOT Resin solution
IMDG, IATA RESIN SOLUTION
Transport hazard class(es)
DOT
Class 3 Flammable liquids
Label 3
IMDG, IATA
Class 3 Flammable liquids
Label 3
Packing group
DOT, IMDG, IATA III
(Contd. on page 10)
US
Page 10/12
Safety Data Sheet
acc. to OSHA HCS
Printing date 01/07/2020 Reviewed on 01/07/2020
Trade name: P34 Brown
(Contd. of page 9)
50.0
Environmental hazards:
Marine pollutant: No
Special precautions for user Warning: Flammable liquids
Danger code (Kemler): 30
EMS Number: F-E,S-E
Stowage Category A
Transport in bulk according to Annex II of
MARPOL73/78 and the IBC Code Not applicable.
Transport/Additional information:
DOT
Quantity limitations On passenger aircraft/rail: 60 L
On cargo aircraft only: 220 L
IMDG
Limited quantities (LQ) 5L
Excepted quantities (EQ) Code: E1
Maximum net quantity per inner packaging: 30 ml
Maximum net quantity per outer packaging: 1000 ml
UN “Model Regulation”: UN 1866 RESIN SOLUTION, 3, III
* 15 Regulatory information
Safety, health and environmental regulations/legislation specific for the substance or mixture
Sara
Section 355 (extremely hazardous substances):
None of the ingredients is listed.
Section 313 (Specific toxic chemical listings):
100-42-5 Styrene
TSCA (Toxic Substances Control Act):
All components have the value ACTIVE.
Chemicals regulated by TSCA Section 12(b)
None of the ingredients is listed.
Chemical regulated by TSCA 5(a)(2)rule:
None of the ingredients is listed.
Hazardous Air Pollutants
100-42-5 Styrene
108-10-1 4-methylpentan-2-one
(Contd. on page 11)
US
Page 11/12
Safety Data Sheet
acc. to OSHA HCS
Printing date 01/07/2020 Reviewed on 01/07/2020
Trade name: P34 Brown
(Contd. of page 10)
50.0
Proposition 65
Chemicals known to cause cancer:
100-42-5 Styrene
13463-67-7 titanium dioxide
14808-60-7 Quartz (SiO2)
1333-86-4 Carbon black
108-10-1 4-methylpentan-2-one
Chemicals known to cause reproductive toxicity for females:
None of the ingredients is listed.
Chemicals known to cause reproductive toxicity for males:
None of the ingredients is listed.
Chemicals known to cause developmental toxicity:
64-17-5 ethanol
108-10-1 4-methylpentan-2-one
Carcinogenic categories
TLV (Threshold Limit Value established by ACGIH)
25013-15-4 Vinyl toluene A4
NIOSH-Ca (National Institute for Occupational Safety and Health)
13463-67-7 titanium dioxide
Listed in CWC Regulations
None of the ingredients is listed.
GHS label elementsThe product is classified and labeled according to the Globally Harmonized System (GHS).
Hazard pictograms
GHS02GHS07GHS08
Signal wordDanger
Hazard-determining components of labeling:
Styrene
Hazard statements
Flammable liquid and vapor.
Causes skin irritation.
Causes serious eye irritation.
Suspected of causing cancer.
Suspected of damaging fertility or the unborn child.
Causes damage to the hearing organs through prolonged or repeated exposure.
(Contd. on page 12)
US
Page 12/12
Safety Data Sheet
acc. to OSHA HCS
Printing date 01/07/2020 Reviewed on 01/07/2020
Trade name: P34 Brown
(Contd. of page 11)
50.0
Precautionary statements
Keep away from heat/sparks/open flames/hot surfaces. – No smoking.
Ground/bond container and receiving equipment.
Use explosion-proof electrical/ventilating/lighting/equipment.
Do not breathe dust/fume/gas/mist/vapors/spray.
Wear protective gloves/protective clothing/eye protection/face protection.
If on skin (or hair): Take off immediately all contaminated clothing. Rinse skin with water/shower.
If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do.
Continue rinsing.
Store in a well-ventilated place. Keep cool.
Store locked up.
Dispose of contents/container in accordance with local/regional/national/international regulations.
Chemical safety assessment:A Chemical Safety Assessment has not been carried out.
16 Other information
This information is based on our present knowledge. However, this shall not constitute a guarantee for any
specific product features and shall not establish a legally valid contractual relationship.
Date of preparation / last revision01/07/2020 / 5
Abbreviations and acronyms:
IMDG: International Maritime Code for Dangerous Goods
DOT: US Department of Transportation
IATA: International Air Transport Association
ACGIH: American Conference of Governmental Industrial Hygienists
EINECS: European Inventory of Existing Commercial Chemical Substances
ELINCS: European List of Notified Chemical Substances
CAS: Chemical Abstracts Service (division of the American Chemical Society)
NFPA: National Fire Protection Association (USA)
HMIS: Hazardous Materials Identification System (USA)
VOC: Volatile Organic Compounds (USA, EU)
LC50: Lethal concentration, 50 percent
LD50: Lethal dose, 50 percent
PBT: Persistent, Bioaccumulative and Toxic
vPvB: very Persistent and very Bioaccumulative
NIOSH: National Institute for Occupational Safety
OSHA: Occupational Safety & Health
TLV: Threshold Limit Value
PEL: Permissible Exposure Limit
REL: Recommended Exposure Limit
Flam. Liq. 3: Flammable liquids Category 3
Skin Irrit. 2: Skin corrosion/irritation Category 2
Eye Irrit. 2A: Serious eye damage/eye irritation Category 2A
Carc. 2: Carcinogenicity Category 2
Repr. 2: Reproductive toxicity Category 2
STOT RE 1: Specific target organ toxicity (repeated exposure) Category 1
* Data compared to the previous version altered.
US
