by | Sep 27, 2025
Page 1/9
Safety Data Sheet
acc. to OSHA HCS
Printing date 01/26/2018 Reviewed on 01/26/2018
46. 0
1 Identification
Product identifier
Trade name: EA604 Hardener
Article number:I604089
Application of the substance / the mixtureEpoxy curing agent
Details of the supplier of the safety data sheetSikaAxson US – EHS Department
Manufacturer/Supplier:
Company Name: Axson Technologies US, Inc.-SikaAxson
Headquarters:
31200 Stephenson Hwy
Madison Heights, MI 48071
USA
Manufacturing Site:
1611 Hults Drive
Eaton Rapids, MI 48827
USA
ehs-us@axson.com
Information department:Product safety department
Emergency telephone number:
During normal opening times: +1 (248) 588-2270
CHEMTREC 24-hour Emergency: +1 (800) 424-9300
2 Hazard(s) identification
Classification of the substance or mixture
d~
GHS07
Skin Sens. 1 H317 May cause an allergic skin reaction.
Aquatic Chronic 3 H412 Harmful to aquatic life with long lasting effects.
Label elements
GHS label elementsThe product is classified and labeled according to the Globally Harmonized System (GHS).
Hazard pictograms
d~
GHS07
Signal wordWarning
Hazard-determining components of labeling:
Polymercaptan
Hazard statements
May cause an allergic skin reaction.
Harmful to aquatic life with long lasting effects.
(Contd. on page 2)
US
Page 2/9
Safety Data Sheet
acc. to OSHA HCS
Printing date 01/26/2018 Reviewed on 01/26/2018
Trade name: EA604 Hardener
(Contd. of page 1)
46. 0
Precautionary statements
Avoid breathing dust/fume/gas/mist/vapors/spray
Avoid breathing dust/fume/gas/mist/vapors/spray
Contaminated work clothing must not be allowed out of the workplace.
Avoid release to the environment.
Wear protective gloves.
If on skin: Wash with plenty of water.
Specific treatment (see on this label).
If skin irritation or rash occurs: Get medical advice/attention.
Wash contaminated clothing before reuse.
Dispose of contents/container in accordance with local/regional/national/international regulations.
Classification system:
NFPA ratings (scale 0 – 4)
0
1
0
Health = 0
Fire = 1
Reactivity = 0
HMIS-ratings (scale 0 – 4)
HEALTH
FIRE
REACTIVITY
0
1
0
Health = 0
Fire = 1
Reactivity = 0
Other hazards
Results of PBT and vPvB assessment
PBT:Not applicable.
vPvB:Not applicable.
3 Composition/information on ingredients
Chemical characterization: Mixtures
Description:Mixture of the substances listed below with nonhazardous additions.
Dangerous components:
Polymercaptan 50-100%
CAS: 90-72-2
EINECS: 202-013-9
2,4,6-tris(dimethylaminomethyl)phenol 5-10%
4 First-aid measures
Description of first aid measures
After inhalation:
Supply fresh air and to be sure call for a doctor.
In case of unconsciousness place patient stably in side position for transportation.
After skin contact:Immediately wash with water and soap and rinse thoroughly.
After eye contact:Rinse opened eye for several minutes under running water.
After swallowing:If symptoms persist consult doctor.
Information for doctor:
Most important symptoms and effects, both acute and delayedNo further relevant information available.
(Contd. on page 3)
US
Page 3/9
Safety Data Sheet
acc. to OSHA HCS
Printing date 01/26/2018 Reviewed on 01/26/2018
Trade name: EA604 Hardener
(Contd. of page 2)
46. 0
Indication of any immediate medical attention and special treatment needed
No further relevant information available.
5 Fire-fighting measures
Extinguishing media
Suitable extinguishing agents:Use fire fighting measures that suit the environment.
Special hazards arising from the substance or mixtureNo further relevant information available.
Advice for firefighters
Protective equipment:Wear self-contained respiratory protective device.
Additional information
Dispose of fire debris and contaminated fire fighting water in accordance with official regulations.
6 Accidental release measures
Personal precautions, protective equipment and emergency proceduresNot required.
Environmental precautions:
Inform respective authorities in case of seepage into water course or sewage system.
Do not allow to enter sewers/ surface or ground water.
Methods and material for containment and cleaning up:
Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust).
Reference to other sections
See Section 7 for information on safe handling.
See Section 8 for information on personal protection equipment.
See Section 13 for disposal information.
Protective Action Criteria for Chemicals
PAC-1:
90-72-2 2,4,6-tris(dimethylaminomethyl)phenol 6.5 mg/m
63148-62-9 Polymethylsiloxane 65 mg/m
PAC-2:
90-72-2 2,4,6-tris(dimethylaminomethyl)phenol 72 mg/m
63148-62-9 Polymethylsiloxane 720 mg/m
PAC-3:
90-72-2 2,4,6-tris(dimethylaminomethyl)phenol 430 mg/m
63148-62-9 Polymethylsiloxane 4,300 mg/m
7 Handling and storage
Handling:
Precautions for safe handlingNo special precautions are necessary if used correctly.
Information about protection against explosions and fires:No special measures required.
Conditions for safe storage, including any incompatibilities
Storage:
Requirements to be met by storerooms and receptacles:No special requirements.
Information about storage in one common storage facility:Not required.
(Contd. on page 4)
US
Page 4/9
Safety Data Sheet
acc. to OSHA HCS
Printing date 01/26/2018 Reviewed on 01/26/2018
Trade name: EA604 Hardener
(Contd. of page 3)
46. 0
Further information about storage conditions:None.
Specific end use(s)No further relevant information available.
8 Exposure controls/personal protection
Additional information about design of technical systems:No further data; see item 7.
Control parameters
Components with limit values that require monitoring at the workplace:
The product does not contain any relevant quantities of materials with critical values that have to be monitored at
the workplace.
Additional information:The lists that were valid during the creation were used as basis.
Exposure controls
Personal protective equipment:
General protective and hygienic measures:
Immediately remove all soiled and contaminated clothing.
Wash hands before breaks and at the end of work.
Breathing equipment:Not required.
Protection of hands:
_S
Protective gloves
The glove material has to be impermeable and resistant to the product/ the substance/ the preparation.
Due to missing tests no recommendation to the glove material can be given for the product/ the preparation/ the
chemical mixture.
Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation
Material of gloves
The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and
varies from manufacturer to manufacturer. As the product is a preparation of several substances, the resistance
of the glove material can not be calculated in advance and has therefore to be checked prior to the application.
Penetration time of glove material
The exact break through time has to be found out by the manufacturer of the protective gloves and has to be
observed.
Eye protection:Goggles recommended during refilling.
9 Physical and chemical properties
Information on basic physical and chemical properties
General Information
Appearance:
Form: Liquid
Color: Amber colored
Odor: Sulphurous
Odor threshold: Not determined.
pH-value: Not determined.
(Contd. on page 5)
US
Page 5/9
Safety Data Sheet
acc. to OSHA HCS
Printing date 01/26/2018 Reviewed on 01/26/2018
Trade name: EA604 Hardener
(Contd. of page 4)
46. 0
Change in condition
Melting point/Melting range:Undetermined.
Boiling point/Boiling range:Undetermined.
Flash point: 149 C (300.2 F)
Flammability (solid, gaseous):Not applicable.
Ignition temperature:
Decomposition temperature: Not determined.
Auto igniting: Product is not selfigniting.
Danger of explosion: Product does not present an explosion hazard.
Explosion limits:
Lower: Not determined.
Upper: Not determined.
Vapor pressure: Not determined.
Density at 20 C (68 F): 1.14 g/cm (9.51 lbs/gal)
Relative density Not determined.
Vapor density Not determined.
Evaporation rate Not determined.
Solubility in / Miscibility with
Water: Not miscible or difficult to mix.
Partition coefficient (n-octanol/water):Not determined.
Viscosity:
Dynamic: Not determined.
Kinematic: Not determined.
Solvent content:
Water: 0.1 %
VOC content: 0.00 %
0.0 g/l / 0.00 lb/gl
Solids content: 0.1 %
Other information No further relevant information available.
10 Stability and reactivity
ReactivityNo further relevant information available.
Chemical stability
Thermal decomposition / conditions to be avoided:No decomposition if used according to specifications.
Possibility of hazardous reactionsNo dangerous reactions known.
Conditions to avoidNo further relevant information available.
Incompatible materials:No further relevant information available.
Hazardous decomposition products:Carbon monoxide and carbon dioxide
US
(Contd. on page 6)
Page 6/9
Safety Data Sheet
acc. to OSHA HCS
Printing date 01/26/2018 Reviewed on 01/26/2018
Trade name: EA604 Hardener
(Contd. of page 5)
46. 0
11 Toxicological information
Information on toxicological effects
Acute toxicity:
Primary irritant effect:
on the skin:No irritant effect.
on the eye:No irritating effect.
Sensitization:Sensitization possible through skin contact.
Additional toxicological information:
The product shows the following dangers according to internally approved calculation methods for preparations:
Irritant
Carcinogenic categories
IARC (International Agency for Research on Cancer)
None of the ingredients is listed.
NTP (National Toxicology Program)
None of the ingredients is listed.
OSHA-Ca (Occupational Safety & Health Administration)
None of the ingredients is listed.
12 Ecological information
Toxicity
Aquatic toxicity:No further relevant information available.
Persistence and degradabilityNo further relevant information available.
Behavior in environmental systems:
Bioaccumulative potentialNo further relevant information available.
Mobility in soilNo further relevant information available.
Ecotoxical effects:
Remark:Harmful to fish
Additional ecological information:
General notes:
Water hazard class 1 (Self-assessment): slightly hazardous for water
Do not allow undiluted product or large quantities of it to reach ground water, water course or sewage system.
Harmful to aquatic organisms
Results of PBT and vPvB assessment
PBT:Not applicable.
vPvB:Not applicable.
Other adverse effectsNo further relevant information available.
13 Disposal considerations
Waste treatment methods
Recommendation:
Must not be disposed of together with household garbage. Do not allow product to reach sewage system.
(Contd. on page 7)
US
Page 7/9
Safety Data Sheet
acc. to OSHA HCS
Printing date 01/26/2018 Reviewed on 01/26/2018
Trade name: EA604 Hardener
(Contd. of page 6)
46. 0
Uncleaned packagings:
Recommendation:Disposal must be made according to official regulations.
14 Transport information
UN-Number
DOT, IMDG, IATA UN3334
UN proper shipping name
DOT, IMDG Aviation regulated liquid, n.o.s.
IATA Aviation regulated liquid, n.o.s. (Mercaptan-Terminated polymer)
Transport hazard class(es)
DOT, IMDG, IATA
dc p `
Class 9 Miscellaneous dangerous substances and articles
Label 9 Packing group
DOT, IMDG, IATA III
Environmental hazards:
Marine pollutant: No
Special precautions for user Warning: Miscellaneous dangerous substances and articles
Transport in bulk according to Annex II of
MARPOL73/78 and the IBC Code Not applicable.
UN “Model Regulation”: UN 3334 AVIATION REGULATED LIQUID, N.O.S., 9, III
15 Regulatory information
Safety, health and environmental regulations/legislation specific for the substance or mixture
Sara
Section 355 (extremely hazardous substances):
None of the ingredients is listed.
Section 313 (Specific toxic chemical listings):
None of the ingredients is listed.
TSCA (Toxic Substances Control Act) (Substances not listed):
71074-89-0 Bis(dimethylaminomethyl)phenol
Chemicals regulated by TSCA Section 12(b)
None of the ingredients is listed.
(Contd. on page 8)
US
Page 8/9
Safety Data Sheet
acc. to OSHA HCS
Printing date 01/26/2018 Reviewed on 01/26/2018
Trade name: EA604 Hardener
(Contd. of page 7)
46. 0
Chemical regulated by TSCA 5(a)(2)rule:
None of the ingredients is listed.
TSCA new (21st Century Act) (Substances not listed)
Polymercaptan
Proposition 65
Chemicals known to cause cancer:
None of the ingredients is listed.
Chemicals known to cause reproductive toxicity for females:
None of the ingredients is listed.
Chemicals known to cause reproductive toxicity for males:
None of the ingredients is listed.
Chemicals known to cause developmental toxicity:
None of the ingredients is listed.
Carcinogenic categories
EPA (Environmental Protection Agency)
None of the ingredients is listed.
TLV (Threshold Limit Value established by ACGIH)
None of the ingredients is listed.
NIOSH-Ca (National Institute for Occupational Safety and Health)
None of the ingredients is listed.
Listed in CWC Regulations
None of the ingredients is listed.
GHS label elementsThe product is classified and labeled according to the Globally Harmonized System (GHS).
Hazard pictograms
d~
GHS07
Signal wordWarning
Hazard-determining components of labeling:
Polymercaptan
Hazard statements
May cause an allergic skin reaction.
Harmful to aquatic life with long lasting effects.
Precautionary statements
Avoid breathing dust/fume/gas/mist/vapors/spray
Contaminated work clothing must not be allowed out of the workplace.
Avoid release to the environment.
Wear protective gloves.
If on skin: Wash with plenty of water.
Specific treatment (see on this label).
If skin irritation or rash occurs: Get medical advice/attention.
(Contd. on page 9)
US
Page 9/9
Safety Data Sheet
acc. to OSHA HCS
Printing date 01/26/2018 Reviewed on 01/26/2018
Trade name: EA604 Hardener
(Contd. of page 8)
46. 0
Wash contaminated clothing before reuse.
Dispose of contents/container in accordance with local/regional/national/international regulations.
Chemical safety assessment:A Chemical Safety Assessment has not been carried out.
16 Other information
This information is based on our present knowledge. However, this shall not constitute a guarantee for any
specific product features and shall not establish a legally valid contractual relationship.
Date of preparation / last revision01/26/2018 / 4
Abbreviations and acronyms:
ADR: Accord europ en sur le transport des marchandises dangereuses par Route (European Agreement concerning the International
Carriage of Dangerous Goods by Road)
IMDG: International Maritime Code for Dangerous Goods
DOT: US Department of Transportation
IATA: International Air Transport Association
ACGIH: American Conference of Governmental Industrial Hygienists
EINECS: European Inventory of Existing Commercial Chemical Substances
ELINCS: European List of Notified Chemical Substances
CAS: Chemical Abstracts Service (division of the American Chemical Society)
NFPA: National Fire Protection Association (USA)
HMIS: Hazardous Materials Identification System (USA)
VOC: Volatile Organic Compounds (USA, EU)
PBT: Persistent, Bioaccumulative and Toxic
vPvB: very Persistent and very Bioaccumulative
NIOSH: National Institute for Occupational Safety
OSHA: Occupational Safety & Health
TLV: Threshold Limit Value
PEL: Permissible Exposure Limit
REL: Recommended Exposure Limit
Skin Sens. 1: Skin sensitisation Category 1
Aquatic Chronic 3: Hazardous to the aquatic environment – long-term aquatic hazard Category 3
US
Page 1/11
Safety Data Sheet
acc. to OSHA HCS
Printing date 08/27/2018 Reviewed on 07/23/2015
47.0.18
1 Identification
Product identifier
Trade name:EA604 Resin
Article number:I604088
Application of the substance / the mixtureEpoxy resin
Details of the supplier of the safety data sheetSikaAxson US – EHS Department
Manufacturer/Supplier:
Supplier’s Name: Axson Technologies US, Inc.-SikaAxson
Headquarters:
31200 Stephenson Hwy
Madison Heights, MI 48071
USA
Manufacturing Site:
1611 Hults Drive
Eaton Rapids, MI 48827
USA
ehs-us@axson.com
Information department:Product safety department
Emergency telephone number:
During normal opening times: +1 (248) 588-2270
CHEMTREC 24-hour Emergency: +1 (800) 424-9300
2 Hazard(s) identification
Classification of the substance or mixture
GHS09 Environment
Aquatic Chronic 2H411Toxic to aquatic life with long lasting effects.
GHS07
Skin Irrit. 2 H315Causes skin irritation.
Eye Irrit. 2A H319Causes serious eye irritation.
Skin Sens. 1 H317May cause an allergic skin reaction.
Label elements
GHS label elements
The product is classified and labeled according to the Globally Harmonized System (GHS).
(Contd. on page 2)
US
Page 2/11
Safety Data Sheet
acc. to OSHA HCS
Printing date 08/27/2018 Reviewed on 07/23/2015
Trade name:EA604 Resin
(Contd. of page 1)
47.0.18
Hazard pictograms
GHS07
GHS09
Signal wordWarning
Hazard-determining components of labeling:
Reaction Product of Bisphenol A and Epichlorohydrin
Hazard statements
Causes skin irritation.
Causes serious eye irritation.
May cause an allergic skin reaction.
Toxic to aquatic life with long lasting effects.
Precautionary statements
Avoid breathing dust/fume/gas/mist/vapors/spray
Avoid breathing dust/fume/gas/mist/vapors/spray
Avoid release to the environment.
Wear protective gloves / eye protection / face protection.
If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do.
Continue rinsing.
Take off contaminated clothing and wash it before reuse.
If skin irritation or rash occurs: Get medical advice/attention.
Specific treatment (see on this label).
If eye irritation persists: Get medical advice/attention.
Wash contaminated clothing before reuse.
Dispose of contents/container in accordance with local/regional/national/international regulations.
Classification system:
NFPA ratings (scale 0 – 4)
2
1
0
Health = 2
Fire = 1
Reactivity = 0
HMIS-ratings (scale 0 – 4)
HEALTH
FIRE
REACTIVITY
2
1
0
Health = 2
Fire = 1
Reactivity = 0
Other hazards
Results of PBT and vPvB assessment
PBT:Not applicable.
vPvB:Not applicable.
US
(Contd. on page 3)
Page 3/11
Safety Data Sheet
acc. to OSHA HCS
Printing date 08/27/2018 Reviewed on 07/23/2015
Trade name:EA604 Resin
(Contd. of page 2)
47.0.18
3 Composition/information on ingredients
Chemical characterization: Mixtures
Description:Mixture of the substances listed below with nonhazardous additions.
Dangerous components:
CAS: 25068-38-6
NLP: 500-033-5
Reaction Product of Bisphenol A and Epichlorohydrin 50-100%
4 First-aid measures
Description of first aid measures
General information:Immediately remove any clothing soiled by the product.
After inhalation:
Supply fresh air and to be sure call for a doctor.
In case of unconsciousness place patient stably in side position for transportation.
After skin contact:Immediately wash with water and soap and rinse thoroughly.
After eye contact:
Rinse opened eye for several minutes under running water. If symptoms persist, consult a doctor.
After swallowing:If symptoms persist consult doctor.
Information for doctor:
Most important symptoms and effects, both acute and delayedNo further relevant information available.
Indication of any immediate medical attention and special treatment needed
No further relevant information available.
5 Fire-fighting measures
Extinguishing media
Suitable extinguishing agents:Use fire fighting measures that suit the environment.
Special hazards arising from the substance or mixtureNo further relevant information available.
Advice for firefighters
Protective equipment:Wear self-contained respiratory protective device.
Additional information
Dispose of fire debris and contaminated fire fighting water in accordance with official regulations.
6 Accidental release measures
Personal precautions, protective equipment and emergency proceduresNot required.
Environmental precautions:
Do not allow product to reach sewage system or any water course.
Inform respective authorities in case of seepage into water course or sewage system.
Do not allow to enter sewers/ surface or ground water.
Methods and material for containment and cleaning up:
Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust).
Dispose contaminated material as waste according to item 13.
Ensure adequate ventilation.
(Contd. on page 4)
US
Page 4/11
Safety Data Sheet
acc. to OSHA HCS
Printing date 08/27/2018 Reviewed on 07/23/2015
Trade name:EA604 Resin
(Contd. of page 3)
47.0.18
Reference to other sections
See Section 7 for information on safe handling.
See Section 8 for information on personal protection equipment.
See Section 13 for disposal information.
Protective Action Criteria for Chemicals
PAC-1:
25068-38-6Reaction Product of Bisphenol A and Epichlorohydrin 90 mg/m
25068-38-6reaction product: bisphenol-A-(epichlorhydrin) epoxy resin (number average
molecular weight 700)
90 mg/m
PAC-2:
25068-38-6Reaction Product of Bisphenol A and Epichlorohydrin 990 mg/m
25068-38-6reaction product: bisphenol-A-(epichlorhydrin) epoxy resin (number average
molecular weight 700)
990 mg/m
PAC-3:
25068-38-6Reaction Product of Bisphenol A and Epichlorohydrin 5,900 mg/m
25068-38-6reaction product: bisphenol-A-(epichlorhydrin) epoxy resin (number average
molecular weight 700)
5,900 mg/m
7 Handling and storage
Handling:
Precautions for safe handling
Ensure good ventilation/exhaustion at the workplace.
Prevent formation of aerosols.
Information about protection against explosions and fires:No special measures required.
Conditions for safe storage, including any incompatibilities
Storage:
Requirements to be met by storerooms and receptacles:No special requirements.
Information about storage in one common storage facility:Not required.
Further information about storage conditions:Keep receptacle tightly sealed.
Specific end use(s)No further relevant information available.
8 Exposure controls/personal protection
Additional information about design of technical systems:No further data; see item 7.
Control parameters
Components with limit values that require monitoring at the workplace:
The product does not contain any relevant quantities of materials with critical values that have to be
monitored at the workplace.
Additional information:The lists that were valid during the creation were used as basis.
(Contd. on page 5)
US
Page 5/11
Safety Data Sheet
acc. to OSHA HCS
Printing date 08/27/2018 Reviewed on 07/23/2015
Trade name:EA604 Resin
(Contd. of page 4)
47.0.18
Exposure controls
Personal protective equipment:
General protective and hygienic measures:
Keep away from foodstuffs, beverages and feed.
Immediately remove all soiled and contaminated clothing.
Wash hands before breaks and at the end of work.
Avoid contact with the eyes and skin.
Breathing equipment:
In case of brief exposure or low pollution use respiratory filter device. In case of intensive or longer
exposure use respiratory protective device that is independent of circulating air.
Protection of hands:
Protective gloves
The glove material has to be impermeable and resistant to the product/ the substance/ the preparation.
Due to missing tests no recommendation to the glove material can be given for the product/ the preparation/
the chemical mixture.
Selection of the glove material on consideration of the penetration times, rates of diffusion and the
degradation
Material of gloves
The selection of the suitable gloves does not only depend on the material, but also on further marks of
quality and varies from manufacturer to manufacturer. As the product is a preparation of several
substances, the resistance of the glove material can not be calculated in advance and has therefore to be
checked prior to the application.
Penetration time of glove material
The exact break through time has to be found out by the manufacturer of the protective gloves and has to be
observed.
Eye protection:
Tightly sealed goggles
9 Physical and chemical properties
Information on basic physical and chemical properties
General Information
Appearance:
Form: Viscous
Color: Light blue
Odor: Characteristic
Odor threshold: Not determined.
pH-value: Not determined.
(Contd. on page 6)
US
Page 6/11
Safety Data Sheet
acc. to OSHA HCS
Printing date 08/27/2018 Reviewed on 07/23/2015
Trade name:EA604 Resin
(Contd. of page 5)
47.0.18
Change in condition
Melting point/Melting range: Undetermined.
Boiling point/Boiling range: Undetermined.
Flash point: 251 C (483.8 F)
Flammability (solid, gaseous): Not applicable.
Decomposition temperature: Not determined.
Auto igniting: Product is not selfigniting.
Danger of explosion: Product does not present an explosion hazard.
Explosion limits:
Lower: Not determined.
Upper: Not determined.
Vapor pressure: Not determined.
Density at 20 C (68 F): 1.17 g/cm (9.76 lbs/gal)
Relative density Not determined.
Vapor density Not determined.
Evaporation rate Not determined.
Solubility in / Miscibility with
Water: Not miscible or difficult to mix.
Partition coefficient (n-octanol/water):Not determined.
Viscosity:
Dynamic: Not determined.
Kinematic: Not determined.
Solvent content:
VOC content: 0.00 %
0.0 g/l / 0.00 lb/gal
Solids content: 0.0 %
Other information No further relevant information available.
10Stability and reactivity
ReactivityNo further relevant information available.
Chemical stability
Thermal decomposition / conditions to be avoided:No decomposition if used according to specifications.
Possibility of hazardous reactionsNo dangerous reactions known.
Conditions to avoidNo further relevant information available.
Incompatible materials:No further relevant information available.
Hazardous decomposition products:Carbon monoxide and carbon dioxide
US
(Contd. on page 7)
Page 7/11
Safety Data Sheet
acc. to OSHA HCS
Printing date 08/27/2018 Reviewed on 07/23/2015
Trade name:EA604 Resin
(Contd. of page 6)
47.0.18
11Toxicological information
Information on toxicological effects
Acute toxicity:
Primary irritant effect:
on the skin:Irritant to skin and mucous membranes.
on the eye:Irritating effect.
Sensitization:Sensitization possible through skin contact.
Additional toxicological information:
The product shows the following dangers according to internally approved calculation methods for
preparations:
Irritant
Carcinogenic categories
IARC (International Agency for Research on Cancer)
None of the ingredients is listed.
NTP (National Toxicology Program)
None of the ingredients is listed.
OSHA-Ca (Occupational Safety & Health Administration)
None of the ingredients is listed.
12Ecological information
Toxicity
Aquatic toxicity:No further relevant information available.
Persistence and degradabilityNo further relevant information available.
Behavior in environmental systems:
Bioaccumulative potentialNo further relevant information available.
Mobility in soilNo further relevant information available.
Ecotoxical effects:
Remark:Toxic for fish
Additional ecological information:
General notes:
Water hazard class 2 (Self-assessment): hazardous for water
Do not allow product to reach ground water, water course or sewage system.
Danger to drinking water if even small quantities leak into the ground.
Also poisonous for fish and plankton in water bodies.
Toxic for aquatic organisms
Results of PBT and vPvB assessment
PBT:Not applicable.
vPvB:Not applicable.
Other adverse effectsNo further relevant information available.
US
(Contd. on page 8)
Page 8/11
Safety Data Sheet
acc. to OSHA HCS
Printing date 08/27/2018 Reviewed on 07/23/2015
Trade name:EA604 Resin
(Contd. of page 7)
47.0.18
13Disposal considerations
Waste treatment methods
Recommendation:
Must not be disposed of together with household garbage. Do not allow product to reach sewage system.
Uncleaned packagings:
Recommendation:Disposal must be made according to official regulations.
14Transport information
UN-Number
DOT not regulated
IMDG, IATA UN3082
UN proper shipping name
DOT not regulated
IMDG ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID,
N.O.S. (Epoxy Resin), MARINE POLLUTANT
IATA ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID,
N.O.S. (Epoxy Resin)
Transport hazard class(es)
DOT
Class not regulated
IMDG, IATA
Class 9 Miscellaneous dangerous substances and articles
Label 9
Packing group
DOT not regulated
IMDG, IATA III
Environmental hazards: Product contains environmentally hazardous substances:
Epoxy Resin
Marine pollutant: Yes
Symbol (fish and tree)
Special marking (IATA): Symbol (fish and tree)
Special precautions for user Warning: Miscellaneous dangerous substances and articles
Danger code (Kemler): 90
EMS Number: F-A,S-F
Stowage Category A
(Contd. on page 9)
US
Page 9/11
Safety Data Sheet
acc. to OSHA HCS
Printing date 08/27/2018 Reviewed on 07/23/2015
Trade name:EA604 Resin
(Contd. of page 8)
47.0.18
Transport in bulk according to Annex II of
MARPOL73/78 and the IBC Code Not applicable.
Transport/Additional information:
IMDG
Limited quantities (LQ) 5L
Excepted quantities (EQ) Code: E1
Maximum net quantity per inner packaging: 30 ml
Maximum net quantity per outer packaging: 1000 ml
UN “Model Regulation”: UN 3082 ENVIRONMENTALLY HAZARDOUS
SUBSTANCES, LIQUID, N.O.S. (EPOXY RESIN), 9, III
15Regulatory information
Safety, health and environmental regulations/legislation specific for the substance or mixture
Sara
Section 355 (extremely hazardous substances):
None of the ingredients is listed.
Section 313 (Specific toxic chemical listings):
None of the ingredients is listed.
TSCA (Toxic Substances Control Act) (Substances not listed):
All ingredients are listed.
Chemicals regulated by TSCA Section 12(b)
None of the ingredients is listed.
Chemical regulated by TSCA 5(a)(2)rule:
None of the ingredients is listed.
Proposition 65
Chemicals known to cause cancer:
None of the ingredients is listed.
Chemicals known to cause reproductive toxicity for females:
None of the ingredients is listed.
Chemicals known to cause reproductive toxicity for males:
None of the ingredients is listed.
Chemicals known to cause developmental toxicity:
None of the ingredients is listed.
Carcinogenic categories
EPA (Environmental Protection Agency)
None of the ingredients is listed.
(Contd. on page 10)
US
Page 10/11
Safety Data Sheet
acc. to OSHA HCS
Printing date 08/27/2018 Reviewed on 07/23/2015
Trade name:EA604 Resin
(Contd. of page 9)
47.0.18
TLV (Threshold Limit Value established by ACGIH)
None of the ingredients is listed.
NIOSH-Ca (National Institute for Occupational Safety and Health)
None of the ingredients is listed.
Listed in CWC Regulations
None of the ingredients is listed.
GHS label elements
The product is classified and labeled according to the Globally Harmonized System (GHS).
Hazard pictograms
GHS07
GHS09
Signal wordWarning
Hazard-determining components of labeling:
Reaction Product of Bisphenol A and Epichlorohydrin
Hazard statements
Causes skin irritation.
Causes serious eye irritation.
May cause an allergic skin reaction.
Toxic to aquatic life with long lasting effects.
Precautionary statements
Avoid breathing dust/fume/gas/mist/vapors/spray
Avoid release to the environment.
Wear protective gloves / eye protection / face protection.
If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do.
Continue rinsing.
Take off contaminated clothing and wash it before reuse.
If skin irritation or rash occurs: Get medical advice/attention.
Specific treatment (see on this label).
If eye irritation persists: Get medical advice/attention.
Wash contaminated clothing before reuse.
Dispose of contents/container in accordance with local/regional/national/international regulations.
Chemical safety assessment:A Chemical Safety Assessment has not been carried out.
16Other information
This information is based on our present knowledge. However, this shall not constitute a guarantee for any
specific product features and shall not establish a legally valid contractual relationship.
Date of preparation / last revision07/23/2015 / 3
Abbreviations and acronyms:
ADR: Accord europ en sur le transport des marchandises dangereuses par Route (European Agreement concerning the International
Carriage of Dangerous Goods by Road)
IMDG: International Maritime Code for Dangerous Goods
DOT: US Department of Transportation
(Contd. on page 11)
US
Page 11/11
Safety Data Sheet
acc. to OSHA HCS
Printing date 08/27/2018 Reviewed on 07/23/2015
Trade name:EA604 Resin
(Contd. of page 10)
47.0.18
IATA: International Air Transport Association
ACGIH: American Conference of Governmental Industrial Hygienists
EINECS: European Inventory of Existing Commercial Chemical Substances
ELINCS: European List of Notified Chemical Substances
CAS: Chemical Abstracts Service (division of the American Chemical Society)
NFPA: National Fire Protection Association (USA)
HMIS: Hazardous Materials Identification System (USA)
VOC: Volatile Organic Compounds (USA, EU)
PBT: Persistent, Bioaccumulative and Toxic
vPvB: very Persistent and very Bioaccumulative
NIOSH: National Institute for Occupational Safety
OSHA: Occupational Safety & Health
TLV: Threshold Limit Value
PEL: Permissible Exposure Limit
REL: Recommended Exposure Limit
Skin Irrit. 2: Skin corrosion/irritation Category 2
Eye Irrit. 2A: Serious eye damage/eye irritation Category 2A
Skin Sens. 1: Skin sensitisation Category 1
Aquatic Chronic 2: Hazardous to the aquatic environment – long-term aquatic hazard Category 2
US
by | Sep 27, 2025
Page 1/12
Safety Data Sheet
acc. to OSHA HCS
Printing date 04/26/2019 Reviewed on 04/26/2019
49.0
1 Identification
Product identifier
Trade name: EA001 1-Part Adhesive
Article number:R210677-1
Application of the substance / the mixtureAdhesives
Details of the supplier of the safety data sheet
Sika Advanced Resins, US
EHS Department
Manufacturer/Supplier:
Supplier’s Name: Sika Advanced Resins, US
Headquarters:
30800 Stephenson Hwy
Madison Heights, MI 48071
USA
ehs-us@axson.com
Information department:Product safety department
Emergency telephone number:
During normal opening times: +1 (248) 588-2270
CHEMTREC 24-hour Emergency: +1 (800) 424-9300
2 Hazard(s) identification
Classification of the substance or mixture
GHS08 Health hazard
Resp. Sens. 1 H334 May cause allergy or asthma symptoms or breathing difficulties if inhaled.
STOT RE 2 H373 May cause damage to organs through prolonged or repeated exposure.
GHS07
Acute Tox. 4 H332 Harmful if inhaled.
Skin Irrit. 2 H315 Causes skin irritation.
Skin Sens. 1 H317 May cause an allergic skin reaction.
STOT SE 3 H335 May cause respiratory irritation.
Eye Irrit. 2B H320 Causes eye irritation.
Label elements
GHS label elementsThe product is classified and labeled according to the Globally Harmonized System (GHS).
(Contd. on page 2) US
Page 2/12
Safety Data Sheet
acc. to OSHA HCS
Printing date 04/26/2019 Reviewed on 04/26/2019
Trade name: EA001 1-Part Adhesive
(Contd. of page 1)
49.0
Hazard pictograms
GHS07GHS08
Signal wordDanger
Hazard-determining components of labeling:
Isocyanates, reaction product of polyol with methylenediphenyl diisocyanate
4,4′-methylenediphenyl diisocyanate
o-(p-isocyanatobenzyl)phenyl isocyanate
diphenylmethanediisocyanate,isomeres and homologues
Hazard statements
Harmful if inhaled.
Causes skin and eye irritation.
May cause allergy or asthma symptoms or breathing difficulties if inhaled.
May cause an allergic skin reaction.
May cause respiratory irritation.
May cause damage to organs through prolonged or repeated exposure.
Precautionary statements
Avoid breathing dust/fume/gas/mist/vapors/spray
Do not breathe dust/fume/gas/mist/vapors/spray.
Wear protective gloves.
[In case of inadequate ventilation] wear respiratory protection.
IF INHALED: Remove person to fresh air and keep comfortable for breathing.
If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do.
Continue rinsing.
Call a poison center/doctor if you feel unwell.
If experiencing respiratory symptoms: Call a poison center/doctor.
Wash contaminated clothing before reuse.
Store locked up.
Dispose of contents/container in accordance with local/regional/national/international regulations.
Classification system:
NFPA ratings (scale 0 – 4)
1
0
0
Health = 1
Fire = 0
Reactivity = 0
HMIS-ratings (scale 0 – 4)
HEALTH
FIRE
REACTIVITY
*2
0
0
Health = *2
Fire = 0
Reactivity = 0
(Contd. on page 3)
US
Page 3/12
Safety Data Sheet
acc. to OSHA HCS
Printing date 04/26/2019 Reviewed on 04/26/2019
Trade name: EA001 1-Part Adhesive
(Contd. of page 2)
49.0
Other hazards
Results of PBT and vPvB assessment
PBT:Not applicable.
vPvB:Not applicable.
3 Composition/information on ingredients
Chemical characterization: Mixtures
Description:Mixture of the substances listed below with nonhazardous additions.
Dangerous components:
CAS: 53862-89-8 Isocyanates, reaction product of polyol with methylenediphenyl diisocyanate 50-100%
CAS: 101-68-8
EINECS: 202-966-0
4,4′-methylenediphenyl diisocyanate 20-50%
CAS: 5873-54-1
EINECS: 227-534-9
o-(p-isocyanatobenzyl)phenyl isocyanate 10-20%
CAS: 9016-87-9 diphenylmethanediisocyanate,isomeres and homologues 10-20%
* 4 First-aid measures
Description of first aid measures
General information:
Immediately remove any clothing soiled by the product.
Symptoms of poisoning may even occur after several hours; therefore medical observation for at least 48 hours
after the accident.
After inhalation:
Supply fresh air and to be sure call for a doctor.
In case of unconsciousness place patient stably in side position for transportation.
After skin contact:Immediately wash with water and soap and rinse thoroughly.
After eye contact:
Rinse opened eye for several minutes under running water. If symptoms persist, consult a doctor.
After swallowing:If symptoms persist consult doctor.
Information for doctor:
Most important symptoms and effects, both acute and delayedNo further relevant information available.
Indication of any immediate medical attention and special treatment needed
No further relevant information available.
* 5 Fire-fighting measures
Extinguishing media
Suitable extinguishing agents:
CO2, extinguishing powder or water spray. Fight larger fires with water spray.
Use fire fighting measures that suit the environment.
(Contd. on page 4)
US
Page 4/12
Safety Data Sheet
acc. to OSHA HCS
Printing date 04/26/2019 Reviewed on 04/26/2019
Trade name: EA001 1-Part Adhesive
(Contd. of page 3)
49.0
Special hazards arising from the substance or mixture
During heating or in case of fire poisonous gases are produced.
Nitrogen oxides (NOx)
Hydrogen cyanide (HCN)
Advice for firefighters
Protective equipment:
Mouth respiratory protective device.
Wear self-contained respiratory protective device.
Additional information
Dispose of fire debris and contaminated fire fighting water in accordance with official regulations.
* 6 Accidental release measures
Personal precautions, protective equipment and emergency proceduresMount respiratory protective device.
Environmental precautions:Do not allow to enter sewers/ surface or ground water.
Methods and material for containment and cleaning up:
Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust).
Dispose contaminated material as waste according to item 13.
Ensure adequate ventilation.
Reference to other sections
See Section 7 for information on safe handling.
See Section 8 for information on personal protection equipment.
See Section 13 for disposal information.
Protective Action Criteria for Chemicals
PAC-1:
101-68-8 4,4′-methylenediphenyl diisocyanate 0.45 mg/m
9016-87-9 diphenylmethanediisocyanate,isomeres and homologues 0.15 mg/m
PAC-2:
101-68-8 4,4′-methylenediphenyl diisocyanate 5 mg/m
9016-87-9 diphenylmethanediisocyanate,isomeres and homologues 3.6 mg/m
PAC-3:
101-68-8 4,4′-methylenediphenyl diisocyanate 55 mg/m
9016-87-9 diphenylmethanediisocyanate,isomeres and homologues 22 mg/m
* 7 Handling and storage
Handling:
Precautions for safe handling
Ensure good ventilation/exhaustion at the workplace.
Prevent formation of aerosols.
Information about protection against explosions and fires:Keep respiratory protective device available.
(Contd. on page 5)
US
Page 5/12
Safety Data Sheet
acc. to OSHA HCS
Printing date 04/26/2019 Reviewed on 04/26/2019
Trade name: EA001 1-Part Adhesive
(Contd. of page 4)
49.0
Conditions for safe storage, including any incompatibilities
Storage:
Requirements to be met by storerooms and receptacles:No special requirements.
Information about storage in one common storage facility:Not required.
Further information about storage conditions:Keep receptacle tightly sealed.
Specific end use(s)No further relevant information available.
8 Exposure controls/personal protection
Additional information about design of technical systems:No further data; see item 7.
Control parameters
Components with limit values that require monitoring at the workplace:
The following constituent is the only constituent of the product which has a PEL, TLV or other recommended
exposure limit.
At this time, the other constituents have no known exposure limits.
101-68-8 4,4′-methylenediphenyl diisocyanate
PEL Ceiling limit value: 0.2 mg/m , 0.02 ppm
REL Long-term value: 0.05 mg/m , 0.005 ppm
Ceiling limit value: 0.2* mg/m , 0.02* ppm
*10-min
TLV Long-term value: 0.051 mg/m , 0.005 ppm
Additional information:The lists that were valid during the creation were used as basis.
Exposure controls
Personal protective equipment:
General protective and hygienic measures:
Keep away from foodstuffs, beverages and feed.
Immediately remove all soiled and contaminated clothing.
Wash hands before breaks and at the end of work.
Store protective clothing separately.
Avoid contact with the eyes and skin.
Breathing equipment:
In case of brief exposure or low pollution use respiratory filter device. In case of intensive or longer exposure use
respiratory protective device that is independent of circulating air.
Protection of hands:
Protective gloves
The glove material has to be impermeable and resistant to the product/ the substance/ the preparation.
Due to missing tests no recommendation to the glove material can be given for the product/ the preparation/ the
chemical mixture.
Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation
(Contd. on page 6)
US
Page 6/12
Safety Data Sheet
acc. to OSHA HCS
Printing date 04/26/2019 Reviewed on 04/26/2019
Trade name: EA001 1-Part Adhesive
(Contd. of page 5)
49.0
Material of gloves
The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and
varies from manufacturer to manufacturer. As the product is a preparation of several substances, the resistance of
the glove material can not be calculated in advance and has therefore to be checked prior to the application.
Penetration time of glove material
The exact break through time has to be found out by the manufacturer of the protective gloves and has to be
observed.
Eye protection:
Tightly sealed goggles
* 9 Physical and chemical properties
Information on basic physical and chemical properties
General Information
Appearance:
Form: Fluid
Color: According to product specification
Odor: Characteristic
Odor threshold: Not determined.
pH-value: Not determined.
Change in condition
Melting point/Melting range:Undetermined.
Boiling point/Boiling range:190 C (374 F)
Flash point: Not applicable.
Flammability (solid, gaseous):Not applicable.
Ignition temperature: 400 C (752 F)
Decomposition temperature: Not determined.
Auto igniting: Product is not selfigniting.
Danger of explosion: Product does not present an explosion hazard.
Explosion limits:
Lower: 0.4 Vol %
Upper: Not determined.
Vapor pressure: Not determined.
Density: Not determined.
Relative density Not determined.
(Contd. on page 7)
US
Page 7/12
Safety Data Sheet
acc. to OSHA HCS
Printing date 04/26/2019 Reviewed on 04/26/2019
Trade name: EA001 1-Part Adhesive
(Contd. of page 6)
49.0
Vapor density Not determined.
Evaporation rate Not determined.
Solubility in / Miscibility with
Water: Not miscible or difficult to mix.
Partition coefficient (n-octanol/water):Not determined.
Viscosity:
Dynamic: Not determined.
Kinematic: Not determined.
Solvent content:
VOC content: 0.00 %
0.0 g/l / 0.00 lb/gal
Solids content: 37.1 %
Other information No further relevant information available.
* 10 Stability and reactivity
ReactivityNo further relevant information available.
Chemical stability
Thermal decomposition / conditions to be avoided:No decomposition if used according to specifications.
Possibility of hazardous reactions
Violent reactions with -NHx, -OH and -SH- groups.
In the presence of water or humidity gas (CO2) is porduced and/or uncontrolled polymerization, possibly leading
to internal pressure rises and consequent risk of container breach.
Conditions to avoidNo further relevant information available.
Incompatible materials:No further relevant information available.
Hazardous decomposition products:
Nitrogen oxides
Carbon monoxide and carbon dioxide
(possible HCN)
* 11 Toxicological information
Information on toxicological effects
Acute toxicity:
LD/LC50 values that are relevant for classification:
Inhalative LC50/4 h 0.49 mg/l (rat)
53862-89-8 Isocyanates, reaction product of polyol with methylenediphenyl diisocyanate
Oral LD50 49,000 mg/kg (rat)
(Contd. on page 8)
US
Page 8/12
Safety Data Sheet
acc. to OSHA HCS
Printing date 04/26/2019 Reviewed on 04/26/2019
Trade name: EA001 1-Part Adhesive
(Contd. of page 7)
49.0
101-68-8 4,4′-methylenediphenyl diisocyanate
Oral LD50 2,200 mg/kg (mouse)
Dermal LD50 >9,400 mg/kg (rabbit)
Primary irritant effect:
on the skin:Irritant to skin and mucous membranes.
on the eye:Irritating effect.
Sensitization:
Sensitization possible through inhalation.
Sensitization possible through skin contact.
Additional toxicological information:
The product shows the following dangers according to internally approved calculation methods for preparations:
Harmful
Irritant
Carcinogenic categories
IARC (International Agency for Research on Cancer)
101-68-8 4,4′-methylenediphenyl diisocyanate 3
9016-87-9 diphenylmethanediisocyanate,isomeres and homologues 3
NTP (National Toxicology Program)
None of the ingredients is listed.
OSHA-Ca (Occupational Safety & Health Administration)
None of the ingredients is listed.
* 12 Ecological information
Toxicity
Aquatic toxicity:No further relevant information available.
Persistence and degradabilityNo further relevant information available.
Behavior in environmental systems:
Bioaccumulative potentialNo further relevant information available.
Mobility in soilNo further relevant information available.
Additional ecological information:
General notes:
Water hazard class 1 (Self-assessment): slightly hazardous for water
Do not allow undiluted product or large quantities of it to reach ground water, water course or sewage system.
Results of PBT and vPvB assessment
PBT:Not applicable.
vPvB:Not applicable.
Other adverse effectsNo further relevant information available.
US
(Contd. on page 9)
Page 9/12
Safety Data Sheet
acc. to OSHA HCS
Printing date 04/26/2019 Reviewed on 04/26/2019
Trade name: EA001 1-Part Adhesive
(Contd. of page 8)
49.0
13 Disposal considerations
Waste treatment methods
Recommendation:
Must not be disposed of together with household garbage. Do not allow product to reach sewage system.
Uncleaned packagings:
Recommendation:Disposal must be made according to official regulations.
14 Transport information
UN-Number
DOT, ADN, IMDG, IATA not regulated
UN proper shipping name
DOT, ADN, IMDG, IATA not regulated
Transport hazard class(es)
DOT, ADN, IMDG, IATA
Class not regulated
Packing group
DOT, IMDG, IATA not regulated
Environmental hazards:
Marine pollutant: No
Special precautions for user Not applicable.
Transport in bulk according to Annex II of
MARPOL73/78 and the IBC Code Not applicable.
UN “Model Regulation”: not regulated
* 15 Regulatory information
Safety, health and environmental regulations/legislation specific for the substance or mixture
Sara
Section 355 (extremely hazardous substances):
None of the ingredients is listed.
Section 313 (Specific toxic chemical listings):
101-68-8 4,4′-methylenediphenyl diisocyanate
9016-87-9 diphenylmethanediisocyanate,isomeres and homologues
(Contd. on page 10)
US
Page 10/12
Safety Data Sheet
acc. to OSHA HCS
Printing date 04/26/2019 Reviewed on 04/26/2019
Trade name: EA001 1-Part Adhesive
(Contd. of page 9)
49.0
TSCA (Toxic Substances Control Act): (Substances not listed)
All ingredients are listed.
Chemicals regulated by TSCA Section 12(b)
None of the ingredients is listed.
Chemical regulated by TSCA 5(a)(2)rule:
None of the ingredients is listed.
Hazardous Air Pollutants
101-68-8 4,4′-methylenediphenyl diisocyanate
Proposition 65
Chemicals known to cause cancer:
None of the ingredients is listed.
Chemicals known to cause reproductive toxicity for females:
None of the ingredients is listed.
Chemicals known to cause reproductive toxicity for males:
None of the ingredients is listed.
Chemicals known to cause developmental toxicity:
None of the ingredients is listed.
Carcinogenic categories
EPA (Environmental Protection Agency)
101-68-8 4,4′-methylenediphenyl diisocyanate D, CBD
9016-87-9 diphenylmethanediisocyanate,isomeres and homologues CBD
TLV (Threshold Limit Value established by ACGIH)
None of the ingredients is listed.
NIOSH-Ca (National Institute for Occupational Safety and Health)
None of the ingredients is listed.
Listed in CWC Regulations
None of the ingredients is listed.
GHS label elementsThe product is classified and labeled according to the Globally Harmonized System (GHS).
Hazard pictograms
GHS07GHS08
Signal wordDanger
Hazard-determining components of labeling:
Isocyanates, reaction product of polyol with methylenediphenyl diisocyanate
(Contd. on page 11)
US
Page 11/12
Safety Data Sheet
acc. to OSHA HCS
Printing date 04/26/2019 Reviewed on 04/26/2019
Trade name: EA001 1-Part Adhesive
(Contd. of page 10)
49.0
4,4′-methylenediphenyl diisocyanate
o-(p-isocyanatobenzyl)phenyl isocyanate
diphenylmethanediisocyanate,isomeres and homologues
Hazard statements
Harmful if inhaled.
Causes skin and eye irritation.
May cause allergy or asthma symptoms or breathing difficulties if inhaled.
May cause an allergic skin reaction.
May cause respiratory irritation.
May cause damage to organs through prolonged or repeated exposure.
Precautionary statements
Do not breathe dust/fume/gas/mist/vapors/spray.
Wear protective gloves.
[In case of inadequate ventilation] wear respiratory protection.
IF INHALED: Remove person to fresh air and keep comfortable for breathing.
If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do.
Continue rinsing.
Call a poison center/doctor if you feel unwell.
If experiencing respiratory symptoms: Call a poison center/doctor.
Wash contaminated clothing before reuse.
Store locked up.
Dispose of contents/container in accordance with local/regional/national/international regulations.
Chemical safety assessment:A Chemical Safety Assessment has not been carried out.
16 Other information
This information is based on our present knowledge. However, this shall not constitute a guarantee for any
specific product features and shall not establish a legally valid contractual relationship.
Date of preparation / last revision04/26/2019 / 1
Abbreviations and acronyms:
IMDG: International Maritime Code for Dangerous Goods
DOT: US Department of Transportation
IATA: International Air Transport Association
ACGIH: American Conference of Governmental Industrial Hygienists
EINECS: European Inventory of Existing Commercial Chemical Substances
ELINCS: European List of Notified Chemical Substances
CAS: Chemical Abstracts Service (division of the American Chemical Society)
NFPA: National Fire Protection Association (USA)
HMIS: Hazardous Materials Identification System (USA)
VOC: Volatile Organic Compounds (USA, EU)
LC50: Lethal concentration, 50 percent
LD50: Lethal dose, 50 percent
PBT: Persistent, Bioaccumulative and Toxic
vPvB: very Persistent and very Bioaccumulative
NIOSH: National Institute for Occupational Safety
OSHA: Occupational Safety & Health
TLV: Threshold Limit Value
PEL: Permissible Exposure Limit
REL: Recommended Exposure Limit
(Contd. on page 12)
US
Page 12/12
Safety Data Sheet
acc. to OSHA HCS
Printing date 04/26/2019 Reviewed on 04/26/2019
Trade name: EA001 1-Part Adhesive
(Contd. of page 11)
49.0
Acute Tox. 4: Acute toxicity Category 4
Skin Irrit. 2: Skin corrosion/irritation Category 2
Eye Irrit. 2B: Serious eye damage/eye irritation Category 2B
Resp. Sens. 1: Respiratory sensitisation Category 1
Skin Sens. 1: Skin sensitisation Category 1
STOT SE 3: Specific target organ toxicity (single exposure) Category 3
STOT RE 2: Specific target organ toxicity (repeated exposure) Category 2
* Data compared to the previous version altered.
US
by | Sep 27, 2025
Page 1/12
Safety Data Sheet
acc. to OSHA HCS
Printing date 01/07/2020 Reviewed on 01/07/2020
50.0
1 Identification
Product identifier
Trade name: P34 Brown
Article number:I034088
Application of the substance / the mixtureModel board filler
Details of the supplier of the safety data sheet
Sika Advanced Resins, US
EHS Department
Manufacturer/Supplier:
Supplier’s Name: Sika Advanced Resins, US
Headquarters:
30800 Stephenson Hwy
Madison Heights, MI 48071
USA
advancedresins.ehs@us.sika.com
Information department:Product safety department
Emergency telephone number:
During normal opening times: +1 (248) 588-2270
CHEMTREC 24-hour Emergency: +1 (800) 424-9300
* 2 Hazard(s) identification
Classification of the substance or mixture
GHS02 Flame
Flam. Liq. 3 H226 Flammable liquid and vapor.
GHS08 Health hazard
Carc. 2 H351 Suspected of causing cancer.
Repr. 2 H361 Suspected of damaging fertility or the unborn child.
STOT RE 1 H372 Causes damage to the hearing organs through prolonged or repeated exposure.
GHS07
Skin Irrit. 2 H315 Causes skin irritation.
Eye Irrit. 2A H319 Causes serious eye irritation.
Label elements
GHS label elementsThe product is classified and labeled according to the Globally Harmonized System (GHS).
(Contd. on page 2) US
Page 2/12
Safety Data Sheet
acc. to OSHA HCS
Printing date 01/07/2020 Reviewed on 01/07/2020
Trade name: P34 Brown
(Contd. of page 1)
50.0
Hazard pictograms
GHS02GHS07GHS08
Signal wordDanger
Hazard-determining components of labeling:
Styrene
Hazard statements
Flammable liquid and vapor.
Causes skin irritation.
Causes serious eye irritation.
Suspected of causing cancer.
Suspected of damaging fertility or the unborn child.
Causes damage to the hearing organs through prolonged or repeated exposure.
Precautionary statements
Avoid breathing dust/fume/gas/mist/vapors/spray
Keep away from heat/sparks/open flames/hot surfaces. – No smoking.
Ground/bond container and receiving equipment.
Use explosion-proof electrical/ventilating/lighting/equipment.
Do not breathe dust/fume/gas/mist/vapors/spray.
Wear protective gloves/protective clothing/eye protection/face protection.
If on skin (or hair): Take off immediately all contaminated clothing. Rinse skin with water/shower.
If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do.
Continue rinsing.
Store in a well-ventilated place. Keep cool.
Store locked up.
Dispose of contents/container in accordance with local/regional/national/international regulations.
Classification system:
NFPA ratings (scale 0 – 4)
2
2
0
Health = 2
Fire = 2
Reactivity = 0
HMIS-ratings (scale 0 – 4)
HEALTH
FIRE
REACTIVITY
*2
2
0
Health = *2
Fire = 2
Reactivity = 0
Other hazards
Results of PBT and vPvB assessment
PBT:Not applicable.
(Contd. on page 3)
US
Page 3/12
Safety Data Sheet
acc. to OSHA HCS
Printing date 01/07/2020 Reviewed on 01/07/2020
Trade name: P34 Brown
(Contd. of page 2)
50.0
vPvB:Not applicable.
* 3 Composition/information on ingredients
Chemical characterization: Mixtures
Description:Mixture of the substances listed below with nonhazardous additions.
Dangerous components:
CAS: 25013-15-4
EINECS: 246-562-2
Vinyl toluene 10-20%
CAS: 100-42-5
EINECS: 202-851-5
Styrene 5-<10%
CAS: 91-99-6 N,N-Bishydroxyethyl-m-toluidine 0.1-1%
* 4 First-aid measures
Description of first aid measures
General information:
Immediately remove any clothing soiled by the product.
Symptoms of poisoning may even occur after several hours; therefore medical observation for at least 48 hours
after the accident.
After inhalation:In case of unconsciousness place patient stably in side position for transportation.
After skin contact:Immediately wash with water and soap and rinse thoroughly.
After eye contact:
Rinse opened eye for several minutes under running water. If symptoms persist, consult a doctor.
After swallowing:If symptoms persist consult doctor.
Information for doctor:
Most important symptoms and effects, both acute and delayedNo further relevant information available.
Indication of any immediate medical attention and special treatment needed
No further relevant information available.
* 5 Fire-fighting measures
Extinguishing media
Suitable extinguishing agents:
CO2, extinguishing powder or water spray. Fight larger fires with water spray or alcohol resistant foam.
Special hazards arising from the substance or mixture
During heating or in case of fire poisonous gases are produced.
Advice for firefighters
Protective equipment:
Mouth respiratory protective device.
Wear self-contained respiratory protective device.
(Contd. on page 4)
US
Page 4/12
Safety Data Sheet
acc. to OSHA HCS
Printing date 01/07/2020 Reviewed on 01/07/2020
Trade name: P34 Brown
(Contd. of page 3)
50.0
Additional information
Dispose of fire debris and contaminated fire fighting water in accordance with official regulations.
* 6 Accidental release measures
Personal precautions, protective equipment and emergency procedures
Mount respiratory protective device.
Wear protective equipment. Keep unprotected persons away.
Environmental precautions:Prevent seepage into sewage system, workpits and cellars.
Methods and material for containment and cleaning up:
Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust).
Dispose contaminated material as waste according to item 13.
Ensure adequate ventilation.
Reference to other sections
See Section 7 for information on safe handling.
See Section 8 for information on personal protection equipment.
See Section 13 for disposal information.
Protective Action Criteria for Chemicals
PAC-1:
100-42-5 Styrene 20 ppm
PAC-2:
100-42-5 Styrene 130 ppm
PAC-3:
100-42-5 Styrene 1100* ppm
* 7 Handling and storage
Handling:
Precautions for safe handling
Ensure good ventilation/exhaustion at the workplace.
Open and handle receptacle with care.
Prevent formation of aerosols.
Information about protection against explosions and fires:
Keep ignition sources away - Do not smoke.
Protect against electrostatic charges.
Keep respiratory protective device available.
Conditions for safe storage, including any incompatibilities
Storage:
Requirements to be met by storerooms and receptacles:No special requirements.
Information about storage in one common storage facility:Not required.
Further information about storage conditions:Keep receptacle tightly sealed.
(Contd. on page 5)
US
Page 5/12
Safety Data Sheet
acc. to OSHA HCS
Printing date 01/07/2020 Reviewed on 01/07/2020
Trade name: P34 Brown
(Contd. of page 4)
50.0
Specific end use(s)No further relevant information available.
* 8 Exposure controls/personal protection
Additional information about design of technical systems:No further data; see item 7.
Control parameters
Components with limit values that require monitoring at the workplace:
The following constituents are the only constituents of the product which have a PEL, TLV or other recommended
exposure limit.
At this time, the remaining constituent has no known exposure limits.
25013-15-4 Vinyl toluene
PEL Long-term value: 480 mg/m , 100 ppm
REL Long-term value: 480 mg/m , 100 ppm
TLV Short-term value: 483 mg/m , 100 ppm
Long-term value: 242 mg/m , 50 ppm
100-42-5 Styrene
ACGIH TLV Short-term value: 170 at 40 ppm mg/m
Long-term value: 85 at 20 ppm mg/m
OSHA PEL Long-term value: 100 ppm mg/m
Ceiling limit value: 200 ppm mg/m
PEL Long-term value: 100 ppm
Ceiling limit value: 200; 600* ppm
*5-min peak in any 3 hrs
REL Short-term value: 425 mg/m , 100 ppm
Long-term value: 215 mg/m , 50 ppm
TLV Short-term value: (170) mg/m , (40) NIC-20 ppm
Long-term value: (85) mg/m , (20) NIC-10 ppm
BEI, NIC-A3, NIC-OTO
Additional information:The lists that were valid during the creation were used as basis.
Exposure controls
Personal protective equipment:
General protective and hygienic measures:
Keep away from foodstuffs, beverages and feed.
Immediately remove all soiled and contaminated clothing.
Wash hands before breaks and at the end of work.
Store protective clothing separately.
Avoid contact with the eyes and skin.
Breathing equipment:
In case of brief exposure or low pollution use respiratory filter device. In case of intensive or longer exposure use
respiratory protective device that is independent of circulating air.
(Contd. on page 6)
US
Page 6/12
Safety Data Sheet
acc. to OSHA HCS
Printing date 01/07/2020 Reviewed on 01/07/2020
Trade name: P34 Brown
(Contd. of page 5)
50.0
Protection of hands:
Protective gloves
The glove material has to be impermeable and resistant to the product/ the substance/ the preparation.
Due to missing tests no recommendation to the glove material can be given for the product/ the preparation/ the
chemical mixture.
Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation
Material of gloves
The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and
varies from manufacturer to manufacturer. As the product is a preparation of several substances, the resistance of
the glove material can not be calculated in advance and has therefore to be checked prior to the application.
Penetration time of glove material
The exact break through time has to be found out by the manufacturer of the protective gloves and has to be
observed.
Eye protection:
Tightly sealed goggles
* 9 Physical and chemical properties
Information on basic physical and chemical properties
General Information
Appearance:
Form: Thixotropic Paste
Color: Brown
Odor: Pungent
Odor threshold: Not determined.
pH-value: Not determined.
Change in condition
Melting point/Melting range:Undetermined.
Boiling point/Boiling range:145 C (293 F)
Flash point: 53 C (127.4 F)
Flammability (solid, gaseous):Not applicable.
Ignition temperature: 490 C (914 F)
Decomposition temperature: Not determined.
(Contd. on page 7)
US
Page 7/12
Safety Data Sheet
acc. to OSHA HCS
Printing date 01/07/2020 Reviewed on 01/07/2020
Trade name: P34 Brown
(Contd. of page 6)
50.0
Auto igniting: Product is not selfigniting.
Danger of explosion: Product is not explosive. However, formation of explosive air/vapor
mixtures are possible.
Explosion limits:
Lower: Not determined.
Upper: Not determined.
Vapor pressure: Not determined.
Density at 20 C (68 F): 0.63 g/cm (5.26 lbs/gal)
Relative density Not determined.
Vapor density Not determined.
Evaporation rate Not determined.
Solubility in / Miscibility with
Water: Not miscible or difficult to mix.
Partition coefficient (n-octanol/water):Not determined.
Viscosity:
Dynamic: Not determined.
Kinematic: Not determined.
Solvent content:
Organic solvents: 19.7 %
VOC content: 28.41 %
179.0 g/l / 1.49 lb/gal
Solids content: 18.5 %
Other information No further relevant information available.
* 10 Stability and reactivity
ReactivityNo further relevant information available.
Chemical stability
Thermal decomposition / conditions to be avoided:No decomposition if used according to specifications.
Possibility of hazardous reactionsNo dangerous reactions known.
Conditions to avoidNo further relevant information available.
Incompatible materials:No further relevant information available.
Hazardous decomposition products:Carbon monoxide and carbon dioxide
US
(Contd. on page 8)
Page 8/12
Safety Data Sheet
acc. to OSHA HCS
Printing date 01/07/2020 Reviewed on 01/07/2020
Trade name: P34 Brown
(Contd. of page 7)
50.0
* 11 Toxicological information
Information on toxicological effects
Acute toxicity:
LD/LC50 values that are relevant for classification:
100-42-5 Styrene
Oral LD50 >2,000 mg/kg (rat)
Dermal LD50 >2,000 mg/kg (rat)
Inhalative LC50/4 h 11.8 mg/l (rat)
Primary irritant effect:
on the skin:Irritant to skin and mucous membranes.
on the eye:Irritating effect.
Sensitization:No sensitizing effects known.
Additional toxicological information:
The product shows the following dangers according to internally approved calculation methods for preparations:
Irritant
Carcinogenic categories
IARC (International Agency for Research on Cancer)
25013-15-4 Vinyl toluene 3
100-42-5 Styrene 2B
Red Iron Oxide 3
64-17-5 ethanol 1
7631-86-9 silicon dioxide, chemically prepared 3
13463-67-7 titanium dioxide 2B
NTP (National Toxicology Program)
None of the ingredients is listed.
OSHA-Ca (Occupational Safety & Health Administration)
None of the ingredients is listed.
12 Ecological information
Toxicity
Aquatic toxicity:No further relevant information available.
Persistence and degradabilityNo further relevant information available.
Behavior in environmental systems:
Bioaccumulative potentialNo further relevant information available.
Mobility in soilNo further relevant information available.
Additional ecological information:
General notes:Not hazardous for water.
(Contd. on page 9)
US
Page 9/12
Safety Data Sheet
acc. to OSHA HCS
Printing date 01/07/2020 Reviewed on 01/07/2020
Trade name: P34 Brown
(Contd. of page 8)
50.0
Results of PBT and vPvB assessment
PBT:Not applicable.
vPvB:Not applicable.
Other adverse effectsNo further relevant information available.
13 Disposal considerations
Waste treatment methods
Recommendation:
Must not be disposed of together with household garbage. Do not allow product to reach sewage system.
Uncleaned packagings:
Recommendation:Disposal must be made according to official regulations.
14 Transport information
UN-Number
DOT, IMDG, IATA UN1866
UN proper shipping name
DOT Resin solution
IMDG, IATA RESIN SOLUTION
Transport hazard class(es)
DOT
Class 3 Flammable liquids
Label 3
IMDG, IATA
Class 3 Flammable liquids
Label 3
Packing group
DOT, IMDG, IATA III
(Contd. on page 10)
US
Page 10/12
Safety Data Sheet
acc. to OSHA HCS
Printing date 01/07/2020 Reviewed on 01/07/2020
Trade name: P34 Brown
(Contd. of page 9)
50.0
Environmental hazards:
Marine pollutant: No
Special precautions for user Warning: Flammable liquids
Danger code (Kemler): 30
EMS Number: F-E,S-E
Stowage Category A
Transport in bulk according to Annex II of
MARPOL73/78 and the IBC Code Not applicable.
Transport/Additional information:
DOT
Quantity limitations On passenger aircraft/rail: 60 L
On cargo aircraft only: 220 L
IMDG
Limited quantities (LQ) 5L
Excepted quantities (EQ) Code: E1
Maximum net quantity per inner packaging: 30 ml
Maximum net quantity per outer packaging: 1000 ml
UN “Model Regulation”: UN 1866 RESIN SOLUTION, 3, III
* 15 Regulatory information
Safety, health and environmental regulations/legislation specific for the substance or mixture
Sara
Section 355 (extremely hazardous substances):
None of the ingredients is listed.
Section 313 (Specific toxic chemical listings):
100-42-5 Styrene
TSCA (Toxic Substances Control Act):
All components have the value ACTIVE.
Chemicals regulated by TSCA Section 12(b)
None of the ingredients is listed.
Chemical regulated by TSCA 5(a)(2)rule:
None of the ingredients is listed.
Hazardous Air Pollutants
100-42-5 Styrene
108-10-1 4-methylpentan-2-one
(Contd. on page 11)
US
Page 11/12
Safety Data Sheet
acc. to OSHA HCS
Printing date 01/07/2020 Reviewed on 01/07/2020
Trade name: P34 Brown
(Contd. of page 10)
50.0
Proposition 65
Chemicals known to cause cancer:
100-42-5 Styrene
13463-67-7 titanium dioxide
14808-60-7 Quartz (SiO2)
1333-86-4 Carbon black
108-10-1 4-methylpentan-2-one
Chemicals known to cause reproductive toxicity for females:
None of the ingredients is listed.
Chemicals known to cause reproductive toxicity for males:
None of the ingredients is listed.
Chemicals known to cause developmental toxicity:
64-17-5 ethanol
108-10-1 4-methylpentan-2-one
Carcinogenic categories
TLV (Threshold Limit Value established by ACGIH)
25013-15-4 Vinyl toluene A4
NIOSH-Ca (National Institute for Occupational Safety and Health)
13463-67-7 titanium dioxide
Listed in CWC Regulations
None of the ingredients is listed.
GHS label elementsThe product is classified and labeled according to the Globally Harmonized System (GHS).
Hazard pictograms
GHS02GHS07GHS08
Signal wordDanger
Hazard-determining components of labeling:
Styrene
Hazard statements
Flammable liquid and vapor.
Causes skin irritation.
Causes serious eye irritation.
Suspected of causing cancer.
Suspected of damaging fertility or the unborn child.
Causes damage to the hearing organs through prolonged or repeated exposure.
(Contd. on page 12)
US
Page 12/12
Safety Data Sheet
acc. to OSHA HCS
Printing date 01/07/2020 Reviewed on 01/07/2020
Trade name: P34 Brown
(Contd. of page 11)
50.0
Precautionary statements
Keep away from heat/sparks/open flames/hot surfaces. – No smoking.
Ground/bond container and receiving equipment.
Use explosion-proof electrical/ventilating/lighting/equipment.
Do not breathe dust/fume/gas/mist/vapors/spray.
Wear protective gloves/protective clothing/eye protection/face protection.
If on skin (or hair): Take off immediately all contaminated clothing. Rinse skin with water/shower.
If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do.
Continue rinsing.
Store in a well-ventilated place. Keep cool.
Store locked up.
Dispose of contents/container in accordance with local/regional/national/international regulations.
Chemical safety assessment:A Chemical Safety Assessment has not been carried out.
16 Other information
This information is based on our present knowledge. However, this shall not constitute a guarantee for any
specific product features and shall not establish a legally valid contractual relationship.
Date of preparation / last revision01/07/2020 / 5
Abbreviations and acronyms:
IMDG: International Maritime Code for Dangerous Goods
DOT: US Department of Transportation
IATA: International Air Transport Association
ACGIH: American Conference of Governmental Industrial Hygienists
EINECS: European Inventory of Existing Commercial Chemical Substances
ELINCS: European List of Notified Chemical Substances
CAS: Chemical Abstracts Service (division of the American Chemical Society)
NFPA: National Fire Protection Association (USA)
HMIS: Hazardous Materials Identification System (USA)
VOC: Volatile Organic Compounds (USA, EU)
LC50: Lethal concentration, 50 percent
LD50: Lethal dose, 50 percent
PBT: Persistent, Bioaccumulative and Toxic
vPvB: very Persistent and very Bioaccumulative
NIOSH: National Institute for Occupational Safety
OSHA: Occupational Safety & Health
TLV: Threshold Limit Value
PEL: Permissible Exposure Limit
REL: Recommended Exposure Limit
Flam. Liq. 3: Flammable liquids Category 3
Skin Irrit. 2: Skin corrosion/irritation Category 2
Eye Irrit. 2A: Serious eye damage/eye irritation Category 2A
Carc. 2: Carcinogenicity Category 2
Repr. 2: Reproductive toxicity Category 2
STOT RE 1: Specific target organ toxicity (repeated exposure) Category 1
* Data compared to the previous version altered.
US
by | Sep 27, 2025
Safety Data Sheet
according to the OSHA Hazard Communication Standard
AP017 SMC (formerly P 17 SMCR) Part A
Revision Date 03/25/2024 Print Date 03/25/2024
1 / 12
SECTION 1. IDENTIFICATION
Product name : AP017 SMC (formerly P 17
SMCR) Part A
Company name : Sika Corporation
201 Polito Avenue
Lyndhurst, NJ 07071
USA
www.sikausa.com
Telephone :
(201) 933-8800
Telefax : (201) 804-1076
E-mail addres
s : ehs
@sika-corp.com
Emergency telephone : CHEMTREC: 800-424-9300
INTERNATIONAL: +1-703-527-3887
Recommended use of the chemical and restrictions on
use
: For further information, refer to product data sheet.
SECTION 2. HAZARDS IDENTIFICATION
GHS classification in accordance with the OSHA Hazard Communication Standard (29 CFR
1910.1200)
Flammable liquids : Category 3
Skin irritation : Category 2
Eye irritation : Category 2A
GHS label elements
Hazard pictograms :
Signal Word : Warning
Hazard Statements : H226 Flammable liquid and vapor.
H315 Causes skin irritation.
H319 Causes serious eye irritation.
Precautionary Statements :
Preven
tion:
P210 Keep awa
y from heat/ sparks/ open flames/ hot surfaces.
Safety Data Sheet
according to the OSHA Hazard Communication Standard
AP017 SMC (formerly P-17 SMCR) Part A
Revision Date 03/25/2024 Print Date 03/25/2024
2 / 12
No smoking.
P233 Keep container tightly closed.
P240 Ground/bond container and receiving equipment.
P241 Use explosion-proof electrical/ ventilating/ lighting/ equip-
ment.
P242 Use only non-sparking tools.
P243 Take precautionary measures against static discharge.
P264 Wash skin thoroughly after handling.
P280 Wear protective gloves/ protective clothing/ eye protection/
face protection.
Response:
P303 + P361 + P353 IF ON SKIN (or hair): Take off immediately
all contaminated clothing. Rinse skin with water/ shower.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water
for several minutes. Remove contact lenses, if present and easy
to do. Continue rinsing.
P332 + P313 If skin irritation occurs: Get medical advice/ atten-
tion.
P337 + P313 If eye irritation persists: Get medical advice/ atten-
tion.
P362 + P364 Take off contaminated clothing and wash it before
reuse.
P370 + P378 In case of fire: Use dry sand, dry chemical or alco-
hol-resistant foam to extinguish.
Storage:
P403 + P235 Store in a well-ventilated place. Keep cool.
Disposal:
P501 Dispose of contents/ container to an approved waste dis-
posal plant.
Additional Labeling
There are no ingredients with unknown acute toxicity used in a mixture at a concentration >= 1%.
Other hazards
None known.
SECTION 3. COMPOSITION/INFORMATION ON INGREDIENTS
Mixtures
Components
Chemical name CAS-No. Classification Concentra-
tion (% w/w)
Talc 1480 7-96-6 >= 3 0 – < 50
vinyltoluene 25013-15-4 Flam. Liq. 3; H22 6
Acute Tox. 4; H332
Skin Irrit. 2; H315
Eye Irrit. 2A; H319
>= 10 – < 20
Safety Data Sheet
according to the OSHA Hazard Communication Standard
AP017 SMC (formerly P-17 SMCR) Part A
Revision Date 03/25/2024 Print Date 03/25/2024
3 / 12
Asp. Tox. 1; H304
propylene carbonate 108-32-7 Eye Irrit. 2A; H319 >= 1 – < 5
Actual concentration is withheld as a trade secret
SECTION 4. FIRST AID MEASURES
General advice : Move out of dangerous area.
Consult a physician.
Show this material safety data sheet to the doctor in attend-
ance.
If inhaled : Move to fresh air.
Consult a physician after significant exposure.
In case of skin contact : Take off contaminated clothing and shoes immediately.
Wash off with soap and plenty of water.
If symptoms persist, call a physician.
In case of eye contact : Immediately flush eye(s) with plenty of water.
Remove contact lenses.
Keep eye wide open while rinsing.
If eye irritation persists, consult a specialist.
If swallowed : Clean mouth with water and drink afterwards plenty of water.
Do not induce vomiting without medical advice.
Do not give milk or alcoholic beverages.
Never give anything by mouth to an unconscious person.
Obtain medical attention.
Most important symptoms
and effects, both acute and
delayed
: irritant effects
Excessive lachrymation
Erythema
Dermatitis
Causes skin irritation.
Causes serious eye irritation.
Notes to physician : Treat symptomatically.
SECTION 5. FIRE-FIGHTING MEASURES
Suitable extinguishing media : Alcohol-resistant foam
Carbon dioxide (CO2)
Dry chemical
Unsuitable extinguishing
media
: Water
High volume water jet
Specific hazards during fire
fighting
: Do not use a solid water stream as it may scatter and spread
fire.
Safety Data Sheet
according to the OSHA Hazard Communication Standard
AP017 SMC (formerly P-17 SMCR) Part A
Revision Date 03/25/2024 Print Date 03/25/2024
4 / 12
Further information : Use water spray to cool unopened containers.
Collect contaminated fire extinguishing water separately. This
must not be discharged into drains.
Fire residues and contaminated fire extinguishing water must
be disposed of in accordance with local regulations.
Special protective equipment
for fire-fighters
: In the event of fire, wear self-contained breathing apparatus.
SECTION 6. ACCIDENTAL RELEASE MEASURES
Personal precautions, protec- tive equipment and emer-
gency procedures
: Use personal protective equipment.
Remove all sources of ignition.
Deny access to unprotected persons.
Beware of vapors accumulating to form explosive concentra-
tions. Vapors can accumulate in low areas.
Environmental precautions : Prevent product from entering drains.
If the product contaminates rivers and lakes or drains inform
respective authorities.
Local authorities should be advised if significant spillages
cannot be contained.
Methods and materials for
containment and cleaning up
: Soak up with inert absorbent material (e.g. sand, silica gel,
acid binder, universal binder, sawdust).
SECTION 7. HANDLING AND STORAGE
Advice on protection against fire and explosion
: Keep away from heat/ sparks/ open flames/ hot surfaces. No
smoking.
Take precautionary measures against electrostatic discharg-
es.
Advice on safe handling : Do not breathe vapors or spray mist.
Avoid exceeding the given occupational exposure limits (see
section 8).
Do not get in eyes, on skin, or on clothing.
For personal protection see section 8.
Smoking, eating and drinking should be prohibited in the ap-
plication area.
Take precautionary measures against static discharge.
Open drum carefully as content may be under pressure.
Take necessary action to avoid static electricity discharge
(which might cause ignition of organic vapors).
Follow standard hygiene measures when handling chemical
products.
Conditions for safe storage : Store in original container.
Keep in a well-ventilated place.
Observe label precautions.
Safety Data Sheet
according to the OSHA Hazard Communication Standard
AP017 SMC (formerly P-17 SMCR) Part A
Revision Date 03/25/2024 Print Date 03/25/2024
5 / 12
Store in accordance with local regulations.
Materials to avoid : Explosives
Oxidizing agents
Poisonous gases
Poisonous liquids
SECTION 8. EXPOSURE CONTRO LS/PERSONAL PROTECTION
Ingredients with workplace control parameters
Components CAS-No. Value type
(Form of
exposure)
Control parame-
ters / Permissible
concentration
Basis
Talc 14807-96-6 TWA (Dust) 20 Million parti-
cles per cubic foot
OSHA Z-3
TWA (respir- able du
st
fraction)
2 mg/m3 OSHA P0
TWA (Res-
pirable par- ticulate mat-
ter
)
2 mg/m3 ACGIH
PEL (respir-
able)
0.05 mg/m3 OSHA CARC
vinyltoluene 25013-15-4 TWA 10 ppm ACGIH
TWA
100 ppm
480 m
g/m3
OSHA Z-1
TWA 100 ppm
480 mg/m3
OSHA P0
The above constituents are the only constituents of the product which have a PEL, TLV or other rec-
ommended exposure limit. At this time, the other constituents have no known exposure limits.
Engineering measures : Use of adequate ventilation should be sufficient to control
worker exposure to airborne contaminants. If the use of this product generates dust, fumes, gas, vapor or mist, use pro-
cess enclosures, local exhaust ventilation or other engineer-
ing controls to keep worker exposure below any recommend-
ed or statutory limits.
The engineering controls also need to keep gas, vapor or
dust concentrations below an
y lower explosive limits.
Personal protective equipment
Respiratory protection : Use a properly fitted NIOSH approved air-purifying or air-fed
respirator complying with an approved standard if a risk as-
sessment indicates this is necessary.
The filter class for the respirator must be suitable for the max-
imum expected contaminant concentration
Safety Data Sheet
according to the OSHA Hazard Communication Standard
AP017 SMC (formerly P-17 SMCR) Part A
Revision Date 03/25/2024 Print Date 03/25/2024
6 / 12
(gas/vapor/aerosol/particulates) that may arise when han-
dling the product. If this concentration is exceeded, self-
contained breathing apparatus must be used.
Hand protection : Chemical-resistant, impervious gloves complying with an
approved standard should be worn at all times when handling
chemical products if a risk assessment indicates this is nec-
essary.
Eye protection : Safety eyewear complying with an approved standard should
be used when a risk assessment indicates this is necessary.
Skin and body protection : Choose body protection in relation to its type, to the concen-
tration and amount of dangerous substances, and to the spe-
cific work-place.
Hygiene measures : Avoid contact with skin, eyes and clothing.
Wash hands before breaks and immediately after handling
the product.
Remove respiratory and skin/eye protection only after vapors
have been cleared from the area.
Remove contaminated clothing and protective equipment
before entering eating areas.
Wash thoroughly after handling.
SECTION 9. PHYSICAL AND CHEMICAL PROPERTIES
Appearance : paste
Color : black, white
Odor : pungent
Odor Threshold : No data available
pH : Not applicable
Melting point/range / Freezing
poin
t
: No data available
Boiling point/boiling range : 338 F / 170 C
Flash point : > 131 F
/ 55 C
(Method: closed cup)
Evaporation rate : No data available
Flammability (solid, gas) : No data available
Upper explosion limit / Upper
flammability limit
: No data available
Safety Data Sheet
according to the OSHA Hazard Communication Standard
AP017 SMC (formerly P-17 SMCR) Part A
Revision Date 03/25/2024 Print Date 03/25/2024
7 / 12
Lower explosion limit / Lower
flammability limit
: No data available
Vapor pressure : 2 hpa
Relative vapor density : No data available
Density : 1.58 g/cm3 (68 F / 20 C)
Solubility(ies)
Water solubility : insoluble
Solubility in other solvents : No data available
Partition coefficient: n-
octanol/water
: No data available
Autoignition temperature : No data available
Decomposition temperature : No data available
Viscosity
Viscosity, dynamic : No data available
Viscosity, kinematic : > 20.5 mm2/s (104 F / 40 C)
Explosive properties : No data available
Oxidizing properties : No data available
Volatile organic compounds
(VOC) content
:
288 g/l
Part A + Valspar Cream Hardener BPO Part B Combined.
SECTION 10. STABILITY AND REACTIVITY
Reactivity : No dangerous reaction known under conditions of normal use.
Chemical stability : The product is chemically stable.
Possibility of hazardous reac-
tions
: Stable under recommended storage conditions.
Vapors may form explosive mixture with air.
Conditions to avoid : Heat, flames and sparks.
Incompatible materials : No data available
Hazardous decomposition
products
: No decomposition if stored and applied as directed.
Safety Data Sheet
according to the OSHA Hazard Communication Standard
AP017 SMC (formerly P-17 SMCR) Part A
Revision Date 03/25/2024 Print Date 03/25/2024
8 / 12
SECTION 11. TOXICOLOGICAL INFORMATION
Not classified based on available information.
Skin corrosion/irritation
Causes skin irritation.
Serious eye damage/eye irritation
Causes serious eye irritation.
Respiratory or skin sensitization
Skin sensitization
Not classified based on available information.
Respiratory sensitization
Not classified based on available information.
Germ cell mutagenicity
Not classified based on available information.
Carcinogenicity
Not classified based on available information.
IARC Group 2B: Possibly carcinogenic to humans
Titanium dioxide (> 10
m) 1346 3-67-7
OSHA OSHA specifically regulated carcinogen
Talc (Mg3H2(SiO3)4) 14807-96-6
(crystalline silica)
NTP Not applicable
Reproductive toxicity
Not classified based on available information.
STOT-single exposure
Not classified based on available information.
STOT-repeated exposure
Not classified based on available information.
Aspiration toxicity
Not classified based on available information.
Further information
Product:
Remarks : Titanium dioxide (13463-67-7)
In lifetime inhalation studies of rats, airborne respirable-size
titanium dioxide particles have shown to cause an increase in
lung tumors at concentrations associated with substantial
particle lung burdens and consequential pulmonary overload
and inflammation. The potential for these adverse health ef-
Safety Data Sheet
according to the OSHA Hazard Communication Standard
AP017 SMC (formerly P-17 SMCR) Part A
Revision Date 03/25/2024 Print Date 03/25/2024
9 / 12
fects appears to be closely related to the particle size and the
amount of the exposed surface area that comes into contact
with the lung. However, tests with other laboratory animals
such as mice and hamsters, indicate that rats are significantly
more susceptible to the pulmonary overload and inflammation
that causes lung cancer. Epidemiological studies do not sug-
gest an increased risk of cancer in humans from occupational
exposure to titanium dioxide. Titanium dioxide has been char-
acterized by IARC as possibly carcinogenic to humans (Group
2B) through inhalation (not ingestion). It has not been charac-
terized as a potential carcino
gen by either NTP or OSHA.
SECTION 12. ECOLOGICAL INFORMATION
Ecotoxicity
No data available
Persistence and degradability
No data available
Bioaccumulative potential
No data available
Mobility in soil
No data available
Other adverse effects
Product:
Additional ecological infor-
mation
: Do not empty into drains; dispose of this material and its con-
tainer in a safe way.
Avoid dispersal of spilled material and runoff and contact with
soil, waterways, drains and sewers.
SECTION 13. DISPOSAL CONSIDERATIONS
Disposal methods
Waste from residues : Disposal of this product, solutions and any by-products should
at all times comply with the requirements of environmental
protection and waste disposal legislation and any regional
local authority requirements.
Contaminated packaging : Empty containers should be taken to an approved waste han-
dling site for recycling or disposal.
SECTION 14. TRANSPORT INFORMATION
International Regulations
Safety Data Sheet
according to the OSHA Hazard Communication Standard
AP017 SMC (formerly P-17 SMCR) Part A
Revision Date 03/25/2024 Print Date 03/25/2024
10 / 12
IATA-DGR
UN/ID No.
: UN 1866
Proper shippin
g name : Resin solution
Class : 3
Packing group : III
Labels : Flammable Liquids
Packing instruction (cargo
aircraft)
: 366
Packing instruction (passen-
ger aircraft)
: 355
IMDG-Code
UN number : UN 1866
Proper shipping name : RESIN SOLUTION
Class
: 3
Packin
g group : III
Label
s : 3
EmS Code : F-E, S-EMarine pollutant : no
Domestic regulation
49 CFR
UN/ID/NA number : UN 1866
Proper shipping name : Resin solution
Class
: 3
Packin
g group : III
Labels : FLAMMABLE
LIQUID
ERG Code : 127
Marine pollutant : no
DOT: As per 49CFR 173.150 (f) Combustible Liquid Exception, Material is Not Regulated.
IMDG: For Limited Quantity special provisions reference IMDG Code Chapter 3.4
Special precautions for user
The transport classification(s) provided herein are for informational purposes only, and solely based
upon the properties of the unpackaged material as it is described within this Safety Data Sheet.
Transportation classifications may vary by mode of transportation, package sizes, and variations in
regional or country regulations.
SECTION 15. REGULATORY INFORMATION
TSCA list : All chemical substances in this product are either listed as ac-
tive on the TSCA Inventory or are in compliance with a TSCA
Inventory exemption.
No substances are subject to a Significant New Use Rule.
The following substance(s) is/are subject to TSCA 12(b) export notification requirements:
vinyltoluene 25013-15-4
Safety Data Sheet
according to the OSHA Hazard Communication Standard
AP017 SMC (formerly P-17 SMCR) Part A
Revision Date 03/25/2024 Print Date 03/25/2024
11 / 12
CERCLA Reportable Quantity
Listed substances in the product are at low enough levels to not be expected to exceed the RQ
SARA 304 Extremely Hazardous Substances Reportable Quantity
Listed substances in the product are at low enough levels to not be expected to exceed the RQ
SARA 302 Extremely Hazardous Substances Threshold Planning Quantity
This material does not contain any components with a section 302 EHS TPQ.
SARA 311/312 Hazards : Flammable (gases, aerosols, liquids, or solids)
Skin corrosion or irritation
Serious eye damage or eye irritation
SARA 313 : This material does not contain any chemical components with
known CAS numbers that exceed the threshold (De Minimis)
reporting levels established by SARA Title III, Section 313.
Clean Air Act
This product does not contain any hazardous air pollutants (HAP), as defined by the U.S. Clean Air
Act Section 112 (40 CFR 61).
California Prop. 65
WARNING: This product can expose you to chemicals including Talc, which is known to the State of
California to cause cancer, and methanol, which is known to the State of California to cause birth
defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
SECTION 16. OTHER INFORMATION
Full text of other abbreviations
ACGIH : USA. ACGIH Threshold Limit Values (TLV)
OSHA CARC : OSHA Specifically Regulated Chemicals/Carcinogens
OSHA P0 : USA. Table Z-1-A Limits for Air Contaminants (1989 vacated
values)
OSHA Z-1 : USA. Occupational Exposure Limits (OSHA) – Table Z-1 Lim-
its for Air Contaminants
OSHA Z-3 : USA. Occupational Exposure Limits (OSHA) – Table Z-3 Min-
eral Dusts
ACGIH / TWA : 8-hour, time-weighted average
OSHA CARC / PEL : Permissible exposure limit (PEL)
OSHA P0 / TWA : 8-hour time weighted average
OSHA Z-1 / TWA : 8-hour time weighted average
OSHA Z-3 / TWA : 8-hour time weighted average
Notes to Reader
The information contained in this Safety Data Sheet applies only to the actual Sika Corporation
(“Sika”) product identified and described herein. This information is not intended to address, nor
does it address the use or application of the identified Sika product in combination with any other
material, product or process. All of the information set forth herein is based on technical data re-
Safety Data Sheet
according to the OSHA Hazard Communication Standard
AP017 SMC (formerly P-17 SMCR) Part A
Revision Date 03/25/2024 Print Date 03/25/2024
12 / 12
garding the identified product that Sika believes to be reliable as of the date hereof. Prior to each
use of any Sika product, the user must always read and follow the warnings and instructions on
the product’s current Product Data Sheet, product label and Safety Data Sheet for each Sika
product, which are available at web site and/or telephone number listed in Section 1 of this SDS.
SIKA MAKES NO WARRANTIES EXPRESS OR IMPLIED AND ASSUMES NO LIABILITY
ARISING FROM THIS INFORMATION OR ITS USE. SIKA SHALL NOT BE LIABLE UNDER
ANY LEGAL THEORY FOR SPECIAL OR CONS EQUENTIAL DAMAGES AND SHALL NOT BE
RESPONSIBLE FOR THE USE OF THIS PRO DUCT IN A MANNER TO INFRINGE ON ANY
PATENT OR ANY OTHER INTELLECTUAL PROPERTY RIGHTS HELD BY OTHERS.
All sales of Sika products are subject to its current terms and conditions of sale available at
www.sikausa.com or 201-933-8800.
Revision Date 03/25/2024
100000035888
US / Z8
by | Sep 27, 2025
Page 1/13
Safety Data Sheet
acc. to OSHA HCS
Printing date 10/16/2019 Reviewed on 10/16/2019
49.1.7
1 Identification
Product identifier
Trade name: P12 Pine
Article number:I012188
Application of the substance / the mixturePolyester filler
Details of the supplier of the safety data sheet
Sika Advanced Resins, US
EHS Department
Manufacturer/Supplier:
Supplier’s Name: Sika Advanced Resins, US
Headquarters:
30800 Stephenson Hwy
Madison Heights, MI 48071
USA
ehs-us@axson.com
Information department:Product safety department
Emergency telephone number:
During normal opening times: +1 (248) 588-2270
CHEMTREC 24-hour Emergency: +1 (800) 424-9300
* 2 Hazard(s) identification
Classification of the substance or mixture
GHS02 Flame
Flam. Liq. 3 H226 Flammable liquid and vapor.
GHS08 Health hazard
Carc. 2 H351 Suspected of causing cancer.
Repr. 2 H361 Suspected of damaging fertility or the unborn child.
STOT RE 1 H372 Causes damage to the hearing organs through prolonged or repeated exposure.
GHS07
Skin Irrit. 2 H315 Causes skin irritation.
Eye Irrit. 2B H320 Causes eye irritation.
Label elements
GHS label elementsThe product is classified and labeled according to the Globally Harmonized System (GHS).
(Contd. on page 2) US
Page 2/13
Safety Data Sheet
acc. to OSHA HCS
Printing date 10/16/2019 Reviewed on 10/16/2019
Trade name: P12 Pine
(Contd. of page 1)
49.1.7
Hazard pictograms
GHS02GHS07GHS08
Signal wordDanger
Hazard-determining components of labeling:
Styrene
Hazard statements
Flammable liquid and vapor.
Causes skin and eye irritation.
Suspected of causing cancer.
Suspected of damaging fertility or the unborn child.
Causes damage to the hearing organs through prolonged or repeated exposure.
Precautionary statements
Avoid breathing dust/fume/gas/mist/vapors/spray
Keep away from heat/sparks/open flames/hot surfaces. – No smoking.
Ground/bond container and receiving equipment.
Use explosion-proof electrical/ventilating/lighting/equipment.
Do not breathe dust/fume/gas/mist/vapors/spray.
Wear protective gloves/protective clothing/eye protection/face protection.
If on skin (or hair): Take off immediately all contaminated clothing. Rinse skin with water/shower.
If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do.
Continue rinsing.
Store in a well-ventilated place. Keep cool.
Store locked up.
Dispose of contents/container in accordance with local/regional/national/international regulations.
Classification system:
NFPA ratings (scale 0 – 4)
1
3
0
Health = 1
Fire = 3
Reactivity = 0
HMIS-ratings (scale 0 – 4)
HEALTH
FIRE
REACTIVITY
1
3
0
Health = 1
Fire = 3
Reactivity = 0
Other hazards
Results of PBT and vPvB assessment
PBT:Not applicable.
(Contd. on page 3)
US
Page 3/13
Safety Data Sheet
acc. to OSHA HCS
Printing date 10/16/2019 Reviewed on 10/16/2019
Trade name: P12 Pine
(Contd. of page 2)
49.1.7
vPvB:Not applicable.
* 3 Composition/information on ingredients
Chemical characterization: Mixtures
Description:Mixture of the substances listed below with nonhazardous additions.
Dangerous components:
CAS: 100-42-5
EINECS: 202-851-5
Styrene 20-50%
CAS: 121-69-7
EINECS: 204-493-5
N,N-dimethylaniline 0.25-<1%
CAS: 91-99-6 N,N-Bishydroxyethyl-m-toluidine 0.1-1%
* 4 First-aid measures
Description of first aid measures
General information:
Immediately remove any clothing soiled by the product.
Symptoms of poisoning may even occur after several hours; therefore medical observation for at least 48 hours
after the accident.
After inhalation:In case of unconsciousness place patient stably in side position for transportation.
After skin contact:Immediately wash with water and soap and rinse thoroughly.
After eye contact:
Rinse opened eye for several minutes under running water. If symptoms persist, consult a doctor.
After swallowing:If symptoms persist consult doctor.
Information for doctor:
Most important symptoms and effects, both acute and delayedNo further relevant information available.
Indication of any immediate medical attention and special treatment needed
No further relevant information available.
* 5 Fire-fighting measures
Extinguishing media
Suitable extinguishing agents:
CO2, extinguishing powder or water spray. Fight larger fires with water spray or alcohol resistant foam.
Special hazards arising from the substance or mixture
During heating or in case of fire poisonous gases are produced.
Advice for firefighters
Protective equipment:
Mouth respiratory protective device.
Wear self-contained respiratory protective device.
(Contd. on page 4)
US
Page 4/13
Safety Data Sheet
acc. to OSHA HCS
Printing date 10/16/2019 Reviewed on 10/16/2019
Trade name: P12 Pine
(Contd. of page 3)
49.1.7
Additional information
Dispose of fire debris and contaminated fire fighting water in accordance with official regulations.
* 6 Accidental release measures
Personal precautions, protective equipment and emergency procedures
Mount respiratory protective device.
Wear protective equipment. Keep unprotected persons away.
Environmental precautions:Do not allow to enter sewers/ surface or ground water.
Methods and material for containment and cleaning up:
Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust).
Dispose contaminated material as waste according to item 13.
Ensure adequate ventilation.
Reference to other sections
See Section 7 for information on safe handling.
See Section 8 for information on personal protection equipment.
See Section 13 for disposal information.
Protective Action Criteria for Chemicals
PAC-1:
100-42-5 Styrene 20 ppm
121-69-7 N,N-dimethylaniline 10 ppm
PAC-2:
100-42-5 Styrene 130 ppm
121-69-7 N,N-dimethylaniline 330 ppm
PAC-3:
100-42-5 Styrene 1100* ppm
121-69-7 N,N-dimethylaniline 2,000 ppm
* 7 Handling and storage
Handling:
Precautions for safe handling
Ensure good ventilation/exhaustion at the workplace.
Open and handle receptacle with care.
Prevent formation of aerosols.
Information about protection against explosions and fires:
Keep ignition sources away - Do not smoke.
Protect against electrostatic charges.
Keep respiratory protective device available.
(Contd. on page 5)
US
Page 5/13
Safety Data Sheet
acc. to OSHA HCS
Printing date 10/16/2019 Reviewed on 10/16/2019
Trade name: P12 Pine
(Contd. of page 4)
49.1.7
Conditions for safe storage, including any incompatibilities
Storage:
Requirements to be met by storerooms and receptacles:No special requirements.
Information about storage in one common storage facility:Not required.
Further information about storage conditions:Keep receptacle tightly sealed.
Specific end use(s)No further relevant information available.
* 8 Exposure controls/personal protection
Additional information about design of technical systems:No further data; see item 7.
Control parameters
Components with limit values that require monitoring at the workplace:
The following constituents are the only constituents of the product which have a PEL, TLV or other recommended
exposure limit.
At this time, the remaining constituent has no known exposure limits.
100-42-5 Styrene
ACGIH TLV Short-term value: 170 at 40 ppm mg/m
Long-term value: 85 at 20 ppm mg/m
OSHA PEL Long-term value: 100 ppm mg/m
Ceiling limit value: 200 ppm mg/m
PEL Long-term value: 100 ppm
Ceiling limit value: 200; 600* ppm
*5-min peak in any 3 hrs
REL Short-term value: 425 mg/m , 100 ppm
Long-term value: 215 mg/m , 50 ppm
TLV Short-term value: (170) mg/m , (40) NIC-20 ppm
Long-term value: (85) mg/m , (20) NIC-10 ppm
BEI, NIC-A3, NIC-OTO
121-69-7 N,N-dimethylaniline
PEL Long-term value: 25 mg/m , 5 ppm
Skin
REL Short-term value: 50 mg/m , 10 ppm
Long-term value: 25 mg/m , 5 ppm
Skin
TLV Short-term value: 50 mg/m , 10 ppm
Long-term value: 25 mg/m , 5 ppm
Skin; BEI-M
(Contd. on page 6)
US
Page 6/13
Safety Data Sheet
acc. to OSHA HCS
Printing date 10/16/2019 Reviewed on 10/16/2019
Trade name: P12 Pine
(Contd. of page 5)
49.1.7
Ingredients with biological limit values:
121-69-7 N,N-dimethylaniline
BEI 1.5 % of hemoglobin
Medium: blood
Time: during or end of shift
Parameter: Methemoglobin (background, nonspecific, semi-quantitative)
Additional information:The lists that were valid during the creation were used as basis.
Exposure controls
Personal protective equipment:
General protective and hygienic measures:
Keep away from foodstuffs, beverages and feed.
Immediately remove all soiled and contaminated clothing.
Wash hands before breaks and at the end of work.
Store protective clothing separately.
Avoid contact with the eyes and skin.
Breathing equipment:
In case of brief exposure or low pollution use respiratory filter device. In case of intensive or longer exposure use
respiratory protective device that is independent of circulating air.
Protection of hands:
Protective gloves
The glove material has to be impermeable and resistant to the product/ the substance/ the preparation.
Due to missing tests no recommendation to the glove material can be given for the product/ the preparation/ the
chemical mixture.
Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation
Material of gloves
The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and
varies from manufacturer to manufacturer. As the product is a preparation of several substances, the resistance of
the glove material can not be calculated in advance and has therefore to be checked prior to the application.
Penetration time of glove material
The exact break through time has to be found out by the manufacturer of the protective gloves and has to be
observed.
Eye protection:
Tightly sealed goggles
US
(Contd. on page 7)
Page 7/13
Safety Data Sheet
acc. to OSHA HCS
Printing date 10/16/2019 Reviewed on 10/16/2019
Trade name: P12 Pine
(Contd. of page 6)
49.1.7
* 9 Physical and chemical properties
Information on basic physical and chemical properties
General Information
Appearance:
Form: Thixotropic Paste
Color: Pine
Odor: Pungent
Odor threshold: Not determined.
pH-value: Not determined.
Change in condition
Melting point/Melting range:Undetermined.
Boiling point/Boiling range:145 C (293 F)
Flash point: 31 C (87.8 F)
Flammability (solid, gaseous):Not applicable.
Ignition temperature: 490 C (914 F)
Decomposition temperature: Not determined.
Auto igniting: Product is not selfigniting.
Danger of explosion: Product is not explosive. However, formation of explosive air/vapor
mixtures are possible.
Explosion limits:
Lower: 0.9 Vol %
Upper: 6.8 Vol %
Vapor pressure at 20 C (68 F):6 hPa (4.5 mm Hg)
Density at 20 C (68 F): 0.95 g/cm (7.93 lbs/gal)
Relative density Not determined.
Vapor density Not determined.
Evaporation rate Not determined.
Solubility in / Miscibility with
Water: Not miscible or difficult to mix.
Partition coefficient (n-octanol/water):Not determined.
Viscosity:
Dynamic: Not determined.
Kinematic: Not determined.
Solvent content:
Organic solvents: 0.4 %
VOC content: 20.55 %
195.2 g/l / 1.63 lb/gal
(Contd. on page 8)
US
Page 8/13
Safety Data Sheet
acc. to OSHA HCS
Printing date 10/16/2019 Reviewed on 10/16/2019
Trade name: P12 Pine
(Contd. of page 7)
49.1.7
Solids content: 39.9 %
Other information No further relevant information available.
* 10 Stability and reactivity
ReactivityNo further relevant information available.
Chemical stability
Thermal decomposition / conditions to be avoided:No decomposition if used according to specifications.
Possibility of hazardous reactionsNo dangerous reactions known.
Conditions to avoidNo further relevant information available.
Incompatible materials:No further relevant information available.
Hazardous decomposition products:Carbon monoxide and carbon dioxide
* 11 Toxicological information
Information on toxicological effects
Acute toxicity:
LD/LC50 values that are relevant for classification:
100-42-5 Styrene
Oral LD50 >2,000 mg/kg (rat)
Dermal LD50 >2,000 mg/kg (rat)
Inhalative LC50/4 h 11.8 mg/l (rat)
Primary irritant effect:
on the skin:Irritant to skin and mucous membranes.
on the eye:Irritating effect.
Sensitization:No sensitizing effects known.
Additional toxicological information:
The product shows the following dangers according to internally approved calculation methods for preparations:
Irritant
Carcinogenic categories
IARC (International Agency for Research on Cancer)
14807-96-6 Talc (Mg3H2(SiO3)4) 3
100-42-5 Styrene 2B
112926-00-8 Precipitated silica (Silica-Amorphous) 3
13463-67-7 titanium dioxide 2B
121-69-7 N,N-dimethylaniline 3
64-17-5 ethanol 1
7631-86-9 silicon dioxide, chemically prepared 3
(Contd. on page 9)
US
Page 9/13
Safety Data Sheet
acc. to OSHA HCS
Printing date 10/16/2019 Reviewed on 10/16/2019
Trade name: P12 Pine
(Contd. of page 8)
49.1.7
NTP (National Toxicology Program)
None of the ingredients is listed.
OSHA-Ca (Occupational Safety & Health Administration)
None of the ingredients is listed.
12 Ecological information
Toxicity
Aquatic toxicity:No further relevant information available.
Persistence and degradabilityNo further relevant information available.
Behavior in environmental systems:
Bioaccumulative potentialNo further relevant information available.
Mobility in soilNo further relevant information available.
Additional ecological information:
General notes:
Water hazard class 1 (Self-assessment): slightly hazardous for water
Do not allow undiluted product or large quantities of it to reach ground water, water course or sewage system.
Results of PBT and vPvB assessment
PBT:Not applicable.
vPvB:Not applicable.
Other adverse effectsNo further relevant information available.
13 Disposal considerations
Waste treatment methods
Recommendation:
Must not be disposed of together with household garbage. Do not allow product to reach sewage system.
Uncleaned packagings:
Recommendation:Disposal must be made according to official regulations.
* 14 Transport information
UN-Number
DOT, IMDG, IATA UN1866
UN proper shipping name
DOT Resin solution
IMDG, IATA RESIN SOLUTION
(Contd. on page 10)
US
Page 10/13
Safety Data Sheet
acc. to OSHA HCS
Printing date 10/16/2019 Reviewed on 10/16/2019
Trade name: P12 Pine
(Contd. of page 9)
49.1.7
Transport hazard class(es)
DOT
Class 3 Flammable liquids
Label 3
Packing group
DOT III
Environmental hazards:
Marine pollutant: No
Special precautions for user Not applicable.
EMS Number: F-E,S-E
Transport in bulk according to Annex II of
MARPOL73/78 and the IBC Code Not applicable.
UN “Model Regulation”: not regulated
* 15 Regulatory information
Safety, health and environmental regulations/legislation specific for the substance or mixture
Sara
Section 355 (extremely hazardous substances):
None of the ingredients is listed.
Section 313 (Specific toxic chemical listings):
100-42-5 Styrene
121-69-7 N,N-dimethylaniline
TSCA (Toxic Substances Control Act):
Polyester Resin ACTIVE
14807-96-6 Talc (Mg3H2(SiO3)4) ACTIVE
100-42-5 Styrene ACTIVE
65997-17-3 Fibrous Glass ACTIVE
112926-00-8 Precipitated silica (Silica-Amorphous) *
546-93-0 Magnesite ACTIVE
13463-67-7 titanium dioxide ACTIVE
1318-59-8 Chlorite ACTIVE
(Contd. on page 11)
US
Page 11/13
Safety Data Sheet
acc. to OSHA HCS
Printing date 10/16/2019 Reviewed on 10/16/2019
Trade name: P12 Pine
(Contd. of page 10)
49.1.7
16389-88-1 dolomite ACTIVE
121-69-7 N,N-dimethylaniline ACTIVE
64-17-5 ethanol ACTIVE
91-99-6 N,N-Bishydroxyethyl-m-toluidine ACTIVE
7631-86-9 silicon dioxide, chemically prepared ACTIVE
21645-51-2 aluminium hydroxide ACTIVE
Chemicals regulated by TSCA Section 12(b)
None of the ingredients is listed.
Chemical regulated by TSCA 5(a)(2)rule:
None of the ingredients is listed.
Hazardous Air Pollutants
100-42-5 Styrene
121-69-7 N,N-dimethylaniline
108-10-1 4-methylpentan-2-one
Proposition 65
Chemicals known to cause cancer:
100-42-5 Styrene
13463-67-7 titanium dioxide
108-10-1 4-methylpentan-2-one
Chemicals known to cause reproductive toxicity for females:
None of the ingredients is listed.
Chemicals known to cause reproductive toxicity for males:
None of the ingredients is listed.
Chemicals known to cause developmental toxicity:
64-17-5 ethanol
108-10-1 4-methylpentan-2-one
Carcinogenic categories
TLV (Threshold Limit Value established by ACGIH)
121-69-7 N,N-dimethylaniline A4
NIOSH-Ca (National Institute for Occupational Safety and Health)
13463-67-7 titanium dioxide
Listed in CWC Regulations
None of the ingredients is listed.
GHS label elementsThe product is classified and labeled according to the Globally Harmonized System (GHS).
(Contd. on page 12)
US
Page 12/13
Safety Data Sheet
acc. to OSHA HCS
Printing date 10/16/2019 Reviewed on 10/16/2019
Trade name: P12 Pine
(Contd. of page 11)
49.1.7
Hazard pictograms
GHS02GHS07GHS08
Signal wordDanger
Hazard-determining components of labeling:
Styrene
Hazard statements
Flammable liquid and vapor.
Causes skin and eye irritation.
Suspected of causing cancer.
Suspected of damaging fertility or the unborn child.
Causes damage to the hearing organs through prolonged or repeated exposure.
Precautionary statements
Keep away from heat/sparks/open flames/hot surfaces. – No smoking.
Ground/bond container and receiving equipment.
Use explosion-proof electrical/ventilating/lighting/equipment.
Do not breathe dust/fume/gas/mist/vapors/spray.
Wear protective gloves/protective clothing/eye protection/face protection.
If on skin (or hair): Take off immediately all contaminated clothing. Rinse skin with water/shower.
If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do.
Continue rinsing.
Store in a well-ventilated place. Keep cool.
Store locked up.
Dispose of contents/container in accordance with local/regional/national/international regulations.
Chemical safety assessment:A Chemical Safety Assessment has not been carried out.
16 Other information
This information is based on our present knowledge. However, this shall not constitute a guarantee for any
specific product features and shall not establish a legally valid contractual relationship.
Date of preparation / last revision10/16/2019 / 3
Abbreviations and acronyms:
IMDG: International Maritime Code for Dangerous Goods
DOT: US Department of Transportation
IATA: International Air Transport Association
ACGIH: American Conference of Governmental Industrial Hygienists
EINECS: European Inventory of Existing Commercial Chemical Substances
ELINCS: European List of Notified Chemical Substances
CAS: Chemical Abstracts Service (division of the American Chemical Society)
NFPA: National Fire Protection Association (USA)
HMIS: Hazardous Materials Identification System (USA)
VOC: Volatile Organic Compounds (USA, EU)
LC50: Lethal concentration, 50 percent
(Contd. on page 13)
US
Page 13/13
Safety Data Sheet
acc. to OSHA HCS
Printing date 10/16/2019 Reviewed on 10/16/2019
Trade name: P12 Pine
(Contd. of page 12)
49.1.7
LD50: Lethal dose, 50 percent
PBT: Persistent, Bioaccumulative and Toxic
vPvB: very Persistent and very Bioaccumulative
NIOSH: National Institute for Occupational Safety
OSHA: Occupational Safety & Health
TLV: Threshold Limit Value
PEL: Permissible Exposure Limit
REL: Recommended Exposure Limit
BEI: Biological Exposure Limit
Flam. Liq. 3: Flammable liquids Category 3
Skin Irrit. 2: Skin corrosion/irritation Category 2
Eye Irrit. 2B: Serious eye damage/eye irritation Category 2B
Carc. 2: Carcinogenicity Category 2
Repr. 2: Reproductive toxicity Category 2
STOT RE 1: Specific target organ toxicity (repeated exposure) Category 1
* Data compared to the previous version altered.
US
by | Sep 27, 2025
Safety Data Sheet
according to OSHA 1910.1200 Hazard Communication Standard
SikaBiresin AP007 (formerly APF 7) Part A
Revision Date 10/25/2023 Print Date 10/25/2023
1 / 13
SECTION 1. IDENTIFICATION
Product name : SikaBiresin AP007 (formerly APF 7) Part A
Company name : Sika Corporation
201 Polito Avenue
Lyndhurst, NJ 07071
USA
www.sikausa.com
Telephone :
(201) 933-8800
Telefax : (201) 804-1076
E-mail address : ehs@sika-corp.com
Emergency telephone : CHEMTREC: 800-424-9300
INTERNATIONAL: +1-703-527-3887
Recommended use of the chemical and restrictions on
use
: For further information, refer to product data sheet.
SECTION 2. HAZARDS IDENTIFICATION
GHS classification in accordance with the OSHA Hazard Communication Standard (29 CFR
1910.1200)
Flammable liquids : Category 3
Skin irritation : Category 2
Eye irritation : Category 2A
Carcinogenicity (Inhalation) : Category 1A
GHS label elements
Hazard pictograms :
Signal Word : Da nger
Hazard Statements : H226 Flammable liquid and vapor.
H315 Causes skin irritation.
H319 Causes serious eye irritation.
H350 May cause cancer by inhalation.
Safety Data Sheet
according to OSHA 1910.1200 Hazard Communication Standard
SikaBiresin AP007 (formerly APF 7) Part A
Revision Date 10/25/2023 Print Date 10/25/2023
2 / 13
Precautionary Statements :
Prevention:
P201 Obtain special instructions before use.
P202 Do not handle until all safety precautions have been read
and understood.
P210 Keep away from heat/ sparks/ open flames/ hot surfaces.
No smoking.
P233 Keep container tightly closed.
P240 Ground/bond container and receiving equipment.
P241 Use explosion-proof electrical/ ventilating/ lighting/ equip-
ment.
P242 Use only non-sparking tools.
P243 Take precautionary measures against static discharge.
P264 Wash skin thoroughly after handling.
P280 Wear protective gloves/ protective clothing/ eye protection/
face protection.
Response:
P303 + P361 + P353 IF ON SKIN (or hair): Take off immediately
all contaminated clothing. Rinse skin with water/ shower.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water
for several minutes. Remove contact lenses, if present and easy
to do. Continue rinsing.
P308 + P313 IF exposed or concerned: Get medical advice/
attention.
P332 + P313 If skin irritation occurs: Get medical advice/ atten-
tion.
P337 + P313 If eye irritation persists: Get medical advice/ atten-
tion.
P362 + P364 Take off contaminated clothing and wash it before
reuse.
P370 + P378 In case of fire: Use dry sand, dry chemical or alco-
hol-resistant foam to extinguish.
Storage:
P403 + P235 Store in a well-ventilated place. Keep cool.
P405 Store locked up.
Disposal:
P501 Dispose of contents/ container to an approved waste dis-
posal plant.
Additional Labeling
There are no ingredients with unknown acute toxicity used in a mixture at a concentration >= 1%.
Other hazards
None known.
Safety Data Sheet
according to OSHA 1910.1200 Hazard Communication Standard
SikaBiresin AP007 (formerly APF 7) Part A
Revision Date 10/25/2023 Print Date 10/25/2023
3 / 13
SECTI ON 3. COMPOSITION/INFORMATION ON INGREDIENTS
Mixtures
Components
Chemical name CAS-No. Classification Concentra-
tion (% w/w)
Talc 14807-96-6 >= 50 – < 70
vinyltoluene 25013-15-4 Flam. Liq. 3; H226
Acute Tox. 4; H332
Skin Irrit. 2; H315
Eye Irrit. 2A; H319
Asp. Tox. 1; H304
>= 10 – < 20
barium sulfate 7727-43-7 >= 1 – < 5
Quartz (SiO2) >5 m 14808-60-7 Carc. 1A; H350
STOT RE 1; H372
STOT SE 3; H335
>= 0.1 – < 1
Actual concentration is withheld as a trade secret
SECTION 4. FIRST AID MEASURES
General advice : Move out of dangerous area.
Consult a physician.
Show this material safety data sheet to the doctor in attend-
ance.
If inhaled : Move to fresh air.
Consult a physician after significant exposure.
In case of skin contact : Take off contaminated clothing and shoes immediately.
Wash off with soap and plenty of water.
If symptoms persist, call a physician.
In case of eye contact : Immediately flush eye(s) with plenty of water.
Remove contact lenses.
Keep eye wide open while rinsing.
If eye irritation persists, consult a specialist.
If swallowed : Clean mouth with water and drink afterwards plenty of water.
Do not induce vomiting without medical advice.
Do not give milk or alcoholic beverages.
Never give anything by mouth to an unconscious person.
Obtain medical attention.
Most important symptoms
and effects, both acute and
delayed
: irritant effects
Excessive lachrymation
Erythema
Dermatitis
Causes skin irritation.
Causes serious e
ye irritation.
Safety Data Sheet
according to OSHA 1910.1200 Hazard Communication Standard
SikaBiresin AP007 (formerly APF 7) Part A
Revision Date 10/25/2023 Print Date 10/25/2023
4 / 13
May caus e cancer by inhalation.
Notes to physician : Treat symptomatically.
SECTION 5. FIRE-FIGHTING MEASURES
Suitable extinguishing media : Alcohol-resistant foam
Carbon dioxide (CO2)
Dry chemical
Unsuitable extinguishing
media
: Water
Further information : Use water spray to cool unopened containers.
Collect contaminated fire extinguishing water separately. This
must not be discharged into drains.
Fire residues and contaminated fire extinguishing water must
be disposed of in accordance with local regulations.
Special protective equipment
for fire-fighters
: In the event of fire, wear self-contained breathing apparatus.
SECTION 6. ACCIDENTAL RELEASE MEASURES
Personal precautions, protec- tive equipment and emer- gency procedures
: Use personal protective equipment.
Remove all sources of ignition. Deny access to unprotected persons.
Beware of vapors accumulating to form explosive concentra-
tions. Vapors can accumulate in low areas.
Environmental precautions : Prevent product from entering drains.
If the product contaminates rivers and lakes or drains inform
respective authorities.
Local authorities should be advised if significant spillages
cannot be contained.
Methods and materials for
containment and cleaning up
: Soak up with inert absorbent material (e.g. sand, silica gel,
acid binder, universal binder, sawdust).
SECTION 7. HANDLING AND STORAGE
Advice on protection against fire and explosion
: Use explosion-proof equipment.
Keep away from heat/ sparks/ open flames/ hot surfaces. No smoking.
Take precautionary measures against electrostatic discharg-
es.
Advice on safe handling : Do not breathe vapors or spray mist.
Avoid exceeding the given occupational exposure limits (see
section 8
).
Safety Data Sheet
according to OSHA 1910.1200 Hazard Communication Standard
SikaBiresin AP007 (formerly APF 7) Part A
Revision Date 10/25/2023 Print Date 10/25/2023
5 / 13
Do not get in eye s, on skin, or on clothing.
For personal protection see section 8.
Smoking, eating and drinking should be prohibited in the ap-
plication area.
Take precautionary measures against static discharge.
Open drum carefully as content may be under pressure.
Take necessary action to avoid static electricity discharge
(which might cause ignition of organic vapors).
Follow standard hygiene measures when handling chemical
products.
Conditions for safe storage : Store in original container.
Keep in a well-ventilated place.
Observe label precautions.
Store in accordance with local regulations.
Materials to avoid : Explosives
Oxidizing agents
Poisonous gases
Poisonous liquids
SECTION 8. EXPOSURE CONTRO LS/PERSONAL PROTECTION
Ingredients with workplace control parameters
Components CAS-No. Value type
(Form of
exposure)
Control parame-
ters / Permissible
concentration
Basis
Talc 14807-96-6 TWA (Dust) 20 Million parti-
cles per cubic foot
OSHA Z-3
TWA (respir-
able dust
frac
tion
)
2 mg/m3 OSHA P0
TWA (Res -
pirable par- ticulate mat- ter
)
2 mg/m3 ACGIH
PEL (resp ir-
able)
0.05 mg/m3 OSHA CARC
vinyltoluene 25013-15-4 TW A 50 ppm ACGIH
STEL 100 ppm ACGIH
TWA 100 pp m
480 mg/m3
OSHA Z-1
TWA 100 pp m
480 mg/m3
OSHA P0
barium sulfate 7727-43-7 TWA (Inhal-
able particu- late matter
)
5 mg/m3 ACGIH
TWA (total dus
t)
15 mg/m3 OSHA Z-1
Safety Data Sheet
according to OSHA 1910.1200 Hazard Communication Standard
SikaBiresin AP007 (formerly APF 7) Part A
Revision Date 10/25/2023 Print Date 10/25/2023
6 / 13
TWA (respir-
able fraction)
5 mg/m3 OSHA Z-1
TWA (Total dus
t)
10 mg/m3 OSHA P0
TWA (respir-
able dust
fraction
)
5 mg/m3 OSHA P0
Quartz (SiO2) >5 m 14808-60-7 TWA (Res-
pirable par-
ticulate mat-
ter)
0.025 mg/m3 ACGIH
TWA (Res-
pira
ble dust
)
0.05 mg/m3 OSHA Z-1
TWA (respir- able
)
10 mg/m3 / %SiO2+2
OSHA Z-3
TWA (respir-
able)
250 mppcf / %SiO2+5
OSHA Z-3
TWA (respir- able dust
fraction
)
0.1 mg/m3 OSHA P0
TWA (Res-
pira
ble par-
ticulate mat- ter )
0.025 mg/m3 (Silica)
ACGIH
PEL (respir-
able)
0.05 mg/m3 OSHA CARC
TWA (respir- able dust
fraction
)
0.1 mg/m3 OSHA P0
TWA (Res-
pira
ble par-
ticulate mat-
ter
)
0.025 mg/m3 ACGIH
TWA (Res-
pira
ble par-
ticulate mat- ter )
0.025 mg/m3
(Silica)
ACGIH
The above constituent s are the only constituents of the product which have a PEL, TLV or other rec-
ommended exposure limit. At this time, the other constituents have no known exposure limits.
Engineering measures : Use of adequate ventilation should be sufficient to control
worker exposure to airborne contaminants. If the use of this
product generates dust, fumes, gas, vapor or mist, use pro-
cess enclosures, local exhaust ventilation or other engineer-
ing controls to keep worker exposure below any recommend-
ed or statutory limits.
The engineering controls also need to keep gas, vapor or
dust concentrations below an
y lower explosive limits.
Safety Data Sheet
according to OSHA 1910.1200 Hazard Communication Standard
SikaBiresin AP007 (formerly APF 7) Part A
Revision Date 10/25/2023 Print Date 10/25/2023
7 / 13
Personal protec tive equipment
Respiratory protection : Use a properly fitted NIOSH approved air-purifying or air-fed
respirator complying with an approved standard if a risk as-
sessment indicates this is necessary.
The filter class for the respirator must be suitable for the max-
imum expected contaminant concentration
(gas/vapor/aerosol/particulates) that may arise when han-
dling the product. If this concentration is exceeded, self-
contained breathing apparatus must be used.
Hand protection : Chemical-resistant, impervious gloves complying with an
approved standard should be worn at all times when handling
chemical products if a risk assessment indicates this is nec-
essary.
Eye protection : Safety eyewear complying with an approved standard should
be used when a risk assessment indicates this is necessary.
Skin and body protection : Choose body protection in relation to its type, to the concen-
tration and amount of dangerous substances, and to the spe-
cific work-place.
Hygiene measures : Avoid contact with skin, eyes and clothing.
Wash hands before breaks and immediately after handling
the product.
Remove respiratory and skin/eye protection only after vapors
have been cleared from the area.
Remove contaminated clothing and protective equipment
before entering eating areas.
Wash thoroughly after handling.
SECTION 9. PHYSICAL AND CHEMICAL PROPERTIES
Appearance : paste
Color : various
Odor : pungent
Odor Threshold : No data available
pH : Not applicable
Melting point/range / Freezing
poin
t
: No data available
Boiling point/boiling range : 338 F / 170 C
Flash point : 127 F / 53 C
(Method: closed cup)
Safety Data Sheet
according to OSHA 1910.1200 Hazard Communication Standard
SikaBiresin AP007 (formerly APF 7) Part A
Revision Date 10/25/2023 Print Date 10/25/2023
8 / 13
Evaporation rate : No data available
Flammability (solid, gas) : No data available
Upper explosion limit / Upper
flammability limit
: No data available
Lower explosion limit / Lower
flammability limit
: No data available
Vapor pressure : 2 hpa
Relative vapor density : No data available
Density : 1.59 – 2.13 g/cm3 (68 F / 20 C)
Solubility(ies)
Water solubility : soluble
Solubility in other solvents : No data available
Partition coefficient: n-
octanol/water
: No data available
Autoignition temperature : No data available
Decomposition temperature : No data available
Viscosity
Viscosity, dynamic : No data available
Viscosity, kinematic : > 20.55 mm2/s (104 F / 40 C)
Explosive properties : No data available
Oxidizing properties : No data available
Volatile organic compounds
(VOC) content
: 352 g/l
Part A + Valspar Cream Hardener BPO Part B
SECTION 10. STABILITY AND REACTIVITY
Reactivity : No dangerous reaction known under conditions of normal use.
Chemical stability : The product is chemically stable.
Possibility of hazardous reac-
tions
: Stable under recommended storage conditions.
Vapors may form explosive mixture with air.
Conditions to avoid : Heat, flames and sparks.
Incompatible materials : No data available
Safety Data Sheet
according to OSHA 1910.1200 Hazard Communication Standard
SikaBiresin AP007 (formerly APF 7) Part A
Revision Date 10/25/2023 Print Date 10/25/2023
9 / 13
Hazardous decomposition
products
: No decomposition if stored and applied as directed.
SECTION 11. TOXICOLOGICAL INFORMATION
Not classified due to lack of data.
Skin corrosion/irritation
Causes skin irritation.
Serious eye damage/eye irritation
Causes serious eye irritation.
Respiratory or skin sensitization
Skin sensitization
Not classified due to lack of data.
Respiratory sensitization
Not classified due to lack of data.
Germ cell mutagenicity
Not classified due to lack of data.
Carcinogenicity
May cause cancer by inhalation.
IARC Group 1: Carcinogenic to humans
Quartz (SiO2) 14808-60-7
(Silica dust, crystalline)
Group 2B: Possibly carcinogenic to humans
Titanium dioxide (> 10 m) 13463-67-7
OSHA OSHA specifically regulated carcinogen
Talc (Mg3H2(SiO3)4) 14807-96-6
(crystalline silica)
OSHA specifically regulated carcinogen
Quartz (SiO2) 14808-60-7
(crystalline silica)
NTP Known to be human carcinogen
Quartz (SiO2) 14808-60-7
(Silica, Crystalline (Respirable Size))
Reproductive toxicity
Not classified due to lack of data.
STOT-single exposure
Not classified due to lack of data.
Safety Data Sheet
according to OSHA 1910.1200 Hazard Communication Standard
SikaBiresin AP007 (formerly APF 7) Part A
Revision Date 10/25/2023 Print Date 10/25/2023
10 / 13
STOT-repea ted exposure
Not classified due to lack of data.
Aspiration toxicity
Not classified due to lack of data.
Further information
Product:
Remarks : Titanium dioxide (13463-67-7)
In lifetime inhalation studies of rats, airborne respirable-size
titanium dioxide particles have shown to cause an increase in
lung tumors at concentrations associated with substantial
particle lung burdens and consequential pulmonary overload
and inflammation. The potential for these adverse health ef-
fects appears to be closely related to the particle size and the
amount of the exposed surface area that comes into contact
with the lung. However, tests with other laboratory animals
such as mice and hamsters, indicate that rats are significantly
more susceptible to the pulmonary overload and inflammation
that causes lung cancer. Epidemiological studies do not sug-
gest an increased risk of cancer in humans from occupational
exposure to titanium dioxide. Titanium dioxide has been char-
acterized by IARC as possibly carcinogenic to humans (Group
2B) through inhalation (not ingestion). It has not been charac-
terized as a potential carcino
gen by either NTP or OSHA.
Quartz (14808-60-7): This classification is relevant when ex- posed to Quartz (silicon dioxide) in dust or powder form only,
including cured product that is subject to sanding, grinding,
cutting, or other surface preparation activities.
SECTION 12. ECOLOGICAL INFORMATION
Ecotoxicity
No data available
Persistence and degradability
No data available
Bioaccumulative potential
No data available
Mobility in soil
No data available
Other adverse effects
Product:
Additional ecological infor-
mation
: Do not empty into drains; dispose of this material and its con-
tainer in a safe way.
Avoid dispersal of spilled material and runoff and contact with
Safety Data Sheet
according to OSHA 1910.1200 Hazard Communication Standard
SikaBiresin AP007 (formerly APF 7) Part A
Revision Date 10/25/2023 Print Date 10/25/2023
11 / 13
soil, wate rways, drains and sewers.
SECTION 13. DISPOSAL CONSIDERATIONS
Disposal methods
Waste from residues : Disposal of this product, solutions and any by-products should
at all times comply with the requirements of environmental
protection and waste disposal legislation and any regional
local authority requirements.
Contaminated packaging : Empty containers should be taken to an approved waste han-
dling site for recycling or disposal.
SECTION 14. TRANSPORT INFORMATION
International Regulations
IATA-DGR
UN/ID No. : UN 1866
Proper shipping name : Resin solution
Class : 3
Packing group : III
Labels : Flammable Liquids
Packing instruction (cargo
aircraft)
: 366
Packing instruction (passen-
ger aircraft)
: 355
IMDG-Code
UN number : UN 1866
Proper shipping name : RESIN SOLUTION
Class : 3
Packing group : III
Labels : 3
EmS Code : F-E, S-E
Marine pollutant : no
Domestic regulation
49 CFR
UN/ID/NA number : UN 1866
Proper shipping name : Resin solution
Class : 3
Packing group : III
Labels : FLAMMABLE LIQUID
ERG Code : 127
Marine pollutant : no
DOT: As per 49CFR 173.150 (f) Combustible Liquid Exception, Material is Not Regulated.
DOT: For Limited Quantity exceptions reference 49 CFR 173.150 (b)
Safety Data Sheet
according to OSHA 1910.1200 Hazard Communication Standard
SikaBiresin AP007 (formerly APF 7) Part A
Revision Date 10/25/2023 Print Date 10/25/2023
12 / 13
IMDG: For Limited Quan tity special provisions reference IMDG Code Chapter 3.4
Special precautions for user
The transport classification(s) provided herein are for informational purposes only, and solely based
upon the properties of the unpackaged material as it is described within this Safety Data Sheet.
Transportation classifications may vary by mode of transportation, package sizes, and variations in
regional or country regulations.
SECTION 15. REGULATORY INFORMATION
TSCA list : All chemical substances in this product are either listed as ac-
tive on the TSCA Inventory or are in compliance with a TSCA
Inventory exemption.
No substances are subject to a Significant New Use Rule.
The following substance(s) is/are subject to TSCA 12(b) export notification requirements:
vinyltoluene 25013-15-4
CERCLA Reportable Quantity
Listed substances in the product are at low enough levels to not be expected to exceed the RQ
SARA 304 Extremely Hazardous Substances Reportable Quantity
Listed substances in the product are at low enough levels to not be expected to exceed the RQ
SARA 302 Extremely Hazardous Substances Threshold Planning Quantity
This material does not contain any components with a section 302 EHS TPQ.
SARA 311/312 Hazards : Flammable (gases, aerosols, liquids, or solids)
Carcinogenicity
Skin corrosion or irritation
Serious eye damage or eye irritation
SARA 313 : This material does not contain any chemical components with
known CAS numbers that exceed the threshold (De Minimis)
reporting levels established by SARA Title III, Section 313.
Clean Air Act
This product does not contain any hazardous air pollutants (HAP), as defined by the U.S. Clean Air
Act Section 112 (40 CFR 61).
California Prop. 65
WARNING: This product can expose you to chemicals including Talc, which is known to the State of
California to cause cancer, and methanol, which is known to the State of California to cause birth
defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
SECTION 16. OTHER INFORMATION
Full text of other abbreviations
Safety Data Sheet
according to OSHA 1910.1200 Hazard Communication Standard
SikaBiresin AP007 (formerly APF 7) Part A
Revision Date 10/25/2023 Print Date 10/25/2023
13 / 13
ACGIH : USA. ACGIH Threshold Limit Values (TLV)
OSHA CARC : OSHA Specifically Regulated Chemicals/Carcinogens
OSHA P0 : USA. Table Z-1-A Limits for Air Contaminants (1989 vacated
values)
OSHA Z-1 : USA. Occupational Exposure Limits (OSHA) – Table Z-1 Lim-
its for Air Contaminants
OSHA Z-3 : USA. Occupational Exposure Limits (OSHA) – Table Z-3 Min-
eral Dusts
ACGIH / TWA : 8-hour, time-weighted average
ACGIH / STEL : Short-term exposure limit
OSHA CARC / PEL : Permissible exposure limit (PEL)
OSHA P0 / TWA : 8-hour time weighted average
OSHA Z-1 / TWA : 8-hour time weighted average
OSHA Z-3 / TWA : 8-hour time weighted average
Notes to Reader
The information contained in this Safety Data Sheet applies only to the actual Sika Corporation
(“Sika”) product identified and described herein. This information is not intended to address, nor
does it address the use or application of the identified Sika product in combination with any other
material, product or process. All of the information set forth herein is based on technical data re-
garding the identified product that Sika believes to be reliable as of the date hereof. Prior to each
use of any Sika product, the user must always read and follow the warnings and instructions on
the product’s current Product Data Sheet, product label and Safety Data Sheet for each Sika
product, which are available at web site and/or telephone number listed in Section 1 of this SDS.
SIKA MAKES NO WARRANTIES EXPRESS OR IMPLIED AND ASSUMES NO LIABILITY
ARISING FROM THIS INFORMATION OR ITS USE. SIKA SHALL NOT BE LIABLE UNDER
ANY LEGAL THEORY FOR SPECIAL OR CONS EQUENTIAL DAMAGES AND SHALL NOT BE
RESPONSIBLE FOR THE USE OF THIS PRO DUCT IN A MANNER TO INFRINGE ON ANY
PATENT OR ANY OTHER INTELLECTUAL PROPERTY RIGHTS HELD BY OTHERS.
All sales of Sika products are subject to its current terms and conditions of sale available at
www.sikausa.com or 201-933-8800.
Revision Date 10/25/2023
100000035109
US / Z8
by | Sep 27, 2025
by | Sep 27, 2025
Safety Data Sheet
according to OSHA 1910.1200 Hazard Communication Standard
SikaBiresin CR161 (formerly EPOLAM 2070NA) Part A
Revision Date 10/19/2023
Print Date 10/19/2023
1 / 11
SECTION 1. IDENTIFICATION
Product name :
SikaBiresin CR161 (formerly EPOLAM 2070NA) Part A
Company name : Sika Corporation
201 Polito Avenue
Lyndhurst, NJ 07071
USA
www.sikausa.com
Telephone :
(201) 933-8800
Telefax : (201) 804-1076
E-mail address : ehs
@sika-corp.com
Emergency telephone : CHEMTREC: 800-424-9300
INTERNATIONAL: +1-703-527-3887
Recommended use of the
chemical and restrictions on
use
: For further information, refer to product data sheet.
SECTION 2. HAZARDS IDENTIFICATION
GHS classification in accordance with the OSHA Hazard Communication Standard (29 CFR
1910.1200)
Skin irritation
: Category 2
Serious eye damage
: Category 1
Skin sensitization
: Category 1
GHS label elements
Hazard pictograms
:
Signal Word
: Danger
Hazard Statements
: H315 Causes skin irritation.
H317 May cause an allergic skin reaction.
H318 Causes serious eye damage.
Precautionary Statements
:
Prevention:
P261
Avoid breathing mist or vapors.
Safety Data Sheet
according to OSHA 1910.1200 Hazard Communication Standard
SikaBiresin CR161 (formerly EPOLAM 2070NA) Part A
Revision Date 10/19/2023
Print Date 10/19/2023
2 / 11
P264 Wash skin thoroughly after handling.
P272 Contaminated work clothing must not be allowed out of
the workplace.
P280 Wear protective gloves/ eye protection/ face protection.
Response:
P302 + P352 IF ON SKIN: Wash with plenty of soap and water.
P305 + P351 + P338 + P310 IF IN EYES: Rinse cautiously with
water for several minutes. Remove contact lenses, if present
and easy to do. Continue rinsing. Immediately call a POISON
CENTER/ doctor.
P333 + P313 If skin irritation or rash occurs: Get medical advice/
attention.
P362 + P364 Take off contaminated clothing and wash it before
reuse.
Disposal:
P501 Dispose of contents/ container to an approved waste dis-
posal plant.
Additional Labeling
There are no ingredients with unknown acute toxicity used in a mixture at a concentration >= 1%.
Other hazards
None known.
SECTION 3. COMPOSITION/INFORMATION ON INGREDIENTS
Mixtures
Components
Chemical name CAS-No. Classification Concentra-
tion (% w/w)
Oxirane, 2,2′-[(1-
methylethylidene)bis(4,1-
phenyleneoxymethylene)]bis-
1675-54-3 Skin Irrit. 2; H315
Eye Irrit. 2A; H319
Skin Sens. 1; H317
>= 50 – < 70
4,4'-methylenebis[N,N-bis(2,3-
epoxypropyl)aniline]
28768-32-3 Skin Sens. 1; H317 >= 30 – < 50
1,4-bis(2,3-epoxypropoxy)butane 2425-79-8 Acute Tox. 4; H302
Acute Tox. 4; H332
Acute Tox. 4; H312
Skin Irrit. 2; H315
Eye Dam. 1; H318
Skin Sens. 1; H317
>= 10 – < 20
2,3-epoxypropyl neodecanoate 26761-45-5 Skin Sens. 1; H317
Muta. 2; H341
>= 0.1 – < 1
Actual concentration is withheld as a trade secret
SECTION 4. FIRST AID MEASURES
Safety Data Sheet
according to OSHA 1910.1200 Hazard Communication Standard
SikaBiresin CR161 (formerly EPOLAM 2070NA) Part A
Revision Date 10/19/2023
Print Date 10/19/2023
3 / 11
General advice : Move out of dangerous area.
Consult a physician.
Show this material safety data sheet to the doctor in attend-
ance.
If inhaled : Move to fresh air.
Consult a physician after significant exposure.
In case of skin contact : Take off contaminated clothing and shoes immediately.
Wash off with soap and plenty of water.
If symptoms persist, call a physician.
In case of eye contact : Small amounts splashed into eyes can cause irreversible tis-
sue damage and blindness.
In the case of contact with eyes, rinse immediately with plenty
of water and seek medical advice.
Continue rinsing eyes during transport to hospital.
Remove contact lenses.
Keep eye wide open while rinsing.
If swallowed : Clean mouth with water and drink afterwards plenty of water.
Do not induce vomiting without medical advice.
Do not give milk or alcoholic beverages.
Never give anything by mouth to an unconscious person.
Obtain medical attention.
Most important symptoms
and effects, both acute and
delayed
: Causes skin irritation.
May cause an allergic skin reaction.
Causes serious eye damage.
irritant effects
sensitizing effects
Allergic reactions
Excessive lachrymation
Erythema
Dermatitis
Notes to physician : Treat symptomatically.
SECTION 5. FIRE-FIGHTING MEASURES
Suitable extinguishing media : Use extinguishing measures that are appropriate to local cir-
cumstances and the surrounding environment.
Further information : Collect contaminated fire extinguishing water separately. This
must not be discharged into drains.
Fire residues and contaminated fire extinguishing water must
be disposed of in accordance with local regulations.
Special protective equipment
for fire-fighters
: In the event of fire, wear self-contained breathing apparatus.
Safety Data Sheet
according to OSHA 1910.1200 Hazard Communication Standard
SikaBiresin CR161 (formerly EPOLAM 2070NA) Part A
Revision Date 10/19/2023
Print Date 10/19/2023
4 / 11
SECTION 6. ACCIDENTAL RELEASE MEASURES
Personal precautions, protec-
tive equipment and emer-
gency procedures
: Use personal protective equipment.
Deny access to unprotected persons.
Environmental precautions
: Do not flush into surface water or sanitary sewer system.
Local authorities should be advised if significant spillages
cannot be contained.
Methods and materials for
containment and cleaning up
: Soak up with inert absorbent material (e.g. sand, silica gel,
acid binder, universal binder, sawdust).
Keep in suitable, closed containers for disposal.
SECTION 7. HANDLING AND STORAGE
Advice on protection against
fire and explosion
: Normal measures for preventive fire protection.
Advice on safe handling : Avoid exceeding the given occupational exposure limits (see
section 8).
Do not get in eyes, on skin, or on clothing.
For personal protection see section 8.
Persons with a history of skin sensitization problems or asth-
ma, allergies, chronic or recurrent respiratory disease should
not be employed in any process in which this mixture is being
used.
Smoking, eating and drinking should be prohibited in the ap-
plication area.
Follow standard hygiene measures when handling chemical
products.
Conditions for safe storage : Keep container tightly closed in a dry and well-ventilated
place.
Containers which are opened must be carefully resealed and
kept upright to prevent leakage.
Store in accordance with local regulations.
SECTION 8. EXPOSURE CONTRO LS/PERSONAL PROTECTION
Ingredients with workplace control parameters
Contains no substances with occupational exposure limit values.
Engineering measures : Use of adequate ventilation should be sufficient to control
worker exposure to airborne contaminants. If the use of this
product generates dust, fumes, gas, vapor or mist, use pro-
cess enclosures, local exhaust ventilation or other engineer-
ing controls to keep worker exposure below any recommend-
ed or statutor
y limits.
Safety Data Sheet
according to OSHA 1910.1200 Hazard Communication Standard
SikaBiresin CR161 (formerly EPOLAM 2070NA) Part A
Revision Date 10/19/2023
Print Date 10/19/2023
5 / 11
Personal protective equipment
Respiratory protection : Use a properly fitted NIOSH approved air-purifying or air-fed
respirator complying with an approved standard if a risk as-
sessment indicates this is necessary.
The filter class for the respirator must be suitable for the max-
imum expected contaminant concentration
(gas/vapor/aerosol/particulates) that may arise when han-
dling the product. If this concentration is exceeded, self-
contained breathing apparatus must be used.
Hand protection : Chemical-resistant, impervious gloves complying with an
approved standard should be worn at all times when handling
chemical products if a risk assessment indicates this is nec-
essary.
Eye protection : Safety eyewear complying with an approved standard should
be used when a risk assessment indicates this is necessary.
Skin and body protection : Choose body protection in relation to its type, to the concen-
tration and amount of dangerous substances, and to the spe-
cific work-place.
Hygiene measures : Avoid contact with skin, eyes and clothing.
Wash hands before breaks and immediately after handling
the product.
Remove contaminated clothing and protective equipment
before entering eating areas.
Wash thoroughly after handling.
SECTION 9. PHYSICAL AND CHEMICAL PROPERTIES
Appearance : liquid
Color : amber
Odor : characteristic
Odor Threshold : No data available
pH : Not applicable
Melting point/range / Freezing
point
: No data available
Boiling point/boiling range
: > 392 F / > 200 C
Flash point : 234 F / 112 C
(Method: closed cup)
Evaporation rate : No data available
Safety Data Sheet
according to OSHA 1910.1200 Hazard Communication Standard
SikaBiresin CR161 (formerly EPOLAM 2070NA) Part A
Revision Date 10/19/2023
Print Date 10/19/2023
6 / 11
Flammability (solid, gas)
: No data available
Upper explosion limit / Upper
flammability limit
: No data available
Lower explosion limit / Lower
flammability limit
: No data available
Vapor pressure : 0.1 hpa
Relative vapor density : No data available
Density : 1.15 g/cm3 (68 F / 20 C)
Solubility(ies)
Water solubility : insoluble
Solubility in other solvents : No data available
Partition coefficient: n-
octanol/water
: No data available
Autoignition temperature : No data available
Decomposition temperature : No data available
Viscosity
Viscosity, dynamic : No data available
Viscosity, kinematic : > 20.5 mm2/s (104 F / 40 C)
Explosive properties : No data available
Oxidizing properties : No data available
Volatile organic compounds
(VOC) content
: Not applicable
SECTION 10. STABILITY AND REACTIVITY
Reactivity : No dangerous reaction known under conditions of normal use.
Chemical stability : The product is chemically stable.
Possibility of hazardous reac-
tions
: Stable under recommended storage conditions.
Conditions to avoid : No data available
Incompatible materials : No data available
Hazardous decomposition
products
: No decomposition if stored and applied as directed.
Safety Data Sheet
according to OSHA 1910.1200 Hazard Communication Standard
SikaBiresin CR161 (formerly EPOLAM 2070NA) Part A
Revision Date 10/19/2023
Print Date 10/19/2023
7 / 11
SECTION 11. TOXICOLOGICAL INFORMATION
Acute toxicity
Not classified due to lack of data.
Components:
Oxirane, 2,2′-[(1-methylethylidene)bis(4,1-phenyleneoxymethylene)]bis-:
Acute oral toxicity : LD50 Oral (Rat): > 5,000 mg/kg
Acute dermal toxicity : LD50 Dermal (Rabbit): > 5,000 mg/kg
1,4-bis(2,3-epoxypropoxy)butane:
Acute oral toxicity : LD50 Oral (Rat): 1,163 mg/kg
2,3-epoxypropyl neodecanoate:
Acute oral toxicity : LD50 Oral (Rat): 9,600 mg/kg
Acute dermal toxicity : LD50 Dermal (Rat): 3,800 mg/kg
Skin corrosion/irritation
Causes skin irritation.
Serious eye damage/eye irritation
Causes serious eye damage.
Respiratory or skin sensitization
Skin sensitization
May cause an allergic skin reaction.
Respiratory sensitization
Not classified due to lack of data.
Germ cell mutagenicity
Not classified due to lack of data.
Carcinogenicity
Not classified due to lack of data.
IARC Not applicable
OSHA Not applicable
NTP Not applicable
Reproductive toxicity
Not classified due to lack of data.
Safety Data Sheet
according to OSHA 1910.1200 Hazard Communication Standard
SikaBiresin CR161 (formerly EPOLAM 2070NA) Part A
Revision Date 10/19/2023
Print Date 10/19/2023
8 / 11
STOT-single exposure
Not classified due to lack of data.
STOT-repeated exposure
Not classified due to lack of data.
Once sensitized, a severe allergic reaction may occur when subsequently exposed to very low levels.
Aspiration toxicity
Not classified due to lack of data.
SECTION 12. ECOLOGICAL INFORMATION
Ecotoxicity
Components:
Oxirane, 2,2′-[(1-methylethylidene)bis(4,1-phenyleneoxymethylene)]bis-:
Toxicity to fish : LC50 (Oncorhynchus mykiss (rainbow trout)): 2 mg/l
Exposure time: 96 h
Toxicity to daphnia and other
aquatic invertebrates
: EC50 (Daphnia magna (Water flea)): 1.8 mg/l
Exposure time: 48 h
2,3-epoxypropyl neodecanoate:
Toxicity to daphnia and other
aquatic invertebrates
: EC50 (Daphnia magna (Water flea)): 3.5 mg/l
Exposure time: 48 h
Persistence and degradability
No data available
Bioaccumulative potential
No data available
Mobility in soil
No data available
Other adverse effects
Product:
Additional ecological infor-
mation
: Do not empty into drains; dispose of this material and its con-
tainer in a safe way.
Avoid dispersal of spilled material and runoff and contact with
soil, waterways, drains and sewers.
Toxic to aquatic organisms, may cause long-term adverse
effects in the aquatic environment.
May be harmful to the environment if released in large quanti-
ties.
Water polluting material.
Safety Data Sheet
according to OSHA 1910.1200 Hazard Communication Standard
SikaBiresin CR161 (formerly EPOLAM 2070NA) Part A
Revision Date 10/19/2023
Print Date 10/19/2023
9 / 11
SECTION 13. DISPOSAL CONSIDERATIONS
Disposal methods
Waste from residues : Disposal of this product, solutions and any by-products should
at all times comply with the requirements of environmental
protection and waste disposal legislation and any regional
local authority requirements.
Contaminated packaging : Empty containers should be taken to an approved waste han-
dling site for recycling or disposal.
SECTION 14. TRANSPORT INFORMATION
International Regulations
IATA-DGR
UN/ID No. : UN 3082
Proper shipping name : Environmentall y hazardous substance, liquid, n.o.s.
(epoxy resin)
Class : 9
Packing group : III
Labels : Miscellaneous
Packing instruction (cargo
aircraft)
: 964
Packing instruction (passen-
ger aircraft)
: 964
IMDG-Code
UN number : UN 3082
Proper shipping name : ENVIRONMENTA LLY HAZARDOUS SUBSTANCE, LIQUID,
N.O.S.
(epoxy resin)
Class : 9
Packing group : III
Labels : 9
EmS Code : F-A, S-F
Marine pollutant : yes
Domestic regulation
49 CFR
Not regulated as a dangerous good
DOT: As per 49 CFR 171.4, Non-bulk materials (<119 Gal) are exempt from being classified as a
Marine Pollutant.
DOT: For Limited Quantity exceptions reference 49 CFR 173.155 (b)
Special precautions for user
The transport classification(s) provided herein are for informational purposes only, and solely based
upon the properties of the unpackaged material as it is described within this Safety Data Sheet.
Safety Data Sheet
according to OSHA 1910.1200 Hazard Communication Standard
SikaBiresin CR161 (formerly EPOLAM 2070NA) Part A
Revision Date 10/19/2023
Print Date 10/19/2023
10 / 11
Transportation classifications may vary by mode of transportation, package sizes, and variations in
regional or country regulations.
SECTION 15. REGULATORY INFORMATION
TSCA list : All chemical substances in this product are either listed as ac-
tive on the TSCA Inventory or are in compliance with a TSCA
Inventory exemption.
No substances are subject to a Significant New Use Rule.
No substances are subject to TSCA 12(b) export notification requirements.
CERCLA Reportable Quantity
Listed substances in the product are at low enough levels to not be expected to exceed the RQ
SARA 304 Extremely Hazardous Substances Reportable Quantity
Listed substances in the product are at low enough levels to not be expected to exceed the RQ
SARA 302 Extremely Hazardous Substances Threshold Planning Quantity
This material does not contain any components with a section 302 EHS TPQ.
SARA 311/312 Hazards
: Respiratory or skin sensitization
Skin corrosion or irritation
Serious eye damage or eye irritation
SARA 313
: This material does not contain any chemical components with
known CAS numbers that exceed the threshold (De Minimis)
reporting levels established by SARA Title III, Section 313.
Clean Air Act
This product does not contain any hazardous air pollutants (HAP), as defined by the U.S. Clean Air
Act Section 112 (40 CFR 61).
California Prop. 65
WARNING: This product can expose you to chemicals including Oxirane, (chloromethyl)- Epichloro-
hydrin, which is known to the State of California to cause cancer and birth defects or other reproduc-
tive harm. For more information go to www.P65Warnings.ca.gov.
SECTION 16. OTHER INFORMATION
Full text of other abbreviations
Notes to Reader
The information contained in this Safety Data Sheet applies only to the actual Sika Corporation ("Sika") product identified and described herein. This information is not intended to address, nor
does it address the use or application of the identified Sika product in combination with any other
Safety Data Sheet
according to OSHA 1910.1200 Hazard Communication Standard
SikaBiresin CR161 (formerly EPOLAM 2070NA) Part A
Revision Date 10/19/2023
Print Date 10/19/2023
11 / 11
material, product or process. All of the information set forth herein is based on technical data re-
garding the identified product that Sika believes to be reliable as of the date hereof. Prior to each
use of any Sika product, the user must always read and follow the warnings and instructions on
the product's current Product Data Sheet, product label and Safety Data Sheet for each Sika
product, which are available at web site and/or telephone number listed in Section 1 of this SDS.
SIKA MAKES NO WARRANTIES EXPRESS OR IMPLIED AND ASSUMES NO LIABILITY
ARISING FROM THIS INFORMATION OR ITS USE. SIKA SHALL NOT BE LIABLE UNDER
ANY LEGAL THEORY FOR SPECIAL OR CONS EQUENTIAL DAMAGES AND SHALL NOT BE
RESPONSIBLE FOR THE USE OF THIS PRO DUCT IN A MANNER TO INFRINGE ON ANY
PATENT OR ANY OTHER INTELLECTUAL PR OPERTY RIGHTS HELD BY OTHERS.
All sales of Sika products are subject to its current terms and conditions of sale available at
www.sikausa.com or 201-933-8800.
Revision Date 10/19/2023
100000035446
US / Z8
by | Sep 27, 2025
Safety Data Sheet
according to OSHA 1910.1200 Hazard Communication Standard
SikaBiresin CH161 6 (formerly EPOLAM 2070NA) Part
B
Revision Date 10/19/2023
Print Date 10/19/2023
1 / 11
SECTION 1. IDENTIFICATION
Product name :
SikaBiresin CH161 6 (formerly EPOLAM 2070NA) Part B
Company name : Sika Corporation
201 Polito Avenue
Lyndhurst, NJ 07071
USA
www.sikausa.com
Telephone :
(201) 933-8800
Telefax : (201) 804-1076
E-mail address : ehs @sika-corp.com
Emergency telephone : CHEMTREC: 800-424-9300
INTERNATIONAL: +1-703-527-3887
Recommended use of the
chemical and restrictions on
use
: For further information, refer to product data sheet.
SECTION 2. HAZARDS IDENTIFICATION
GHS classification in accordance with the OSHA Hazard Communication Standard (29 CFR
1910.1200)
Acute toxicity (Oral)
: Category 4
Skin corrosion
: Category 1B
Serious eye damage
: Category 1
Skin sensitization
: Category 1
GHS label elements
Hazard pictograms
:
Signal Word
: Danger
Hazard Statements
: H302 Harmful if swallowed.
H314 Causes severe skin burns and eye damage.
H317 Ma
y cause an allergic skin reaction.
Safety Data Sheet
according to OSHA 1910.1200 Hazard Communication Standard
SikaBiresin CH161 6 (formerly EPOLAM 2070NA) Part
B
Revision Date 10/19/2023
Print Date 10/19/2023
2 / 11
Precautionary Statements
:
Prevention:
P261 Avoid breathing mist or vapors.
P264 Wash skin thoroughly after handling.
P270 Do not eat, drink or smoke when using this product.
P272 Contaminated work clothing must not be allowed out of
the workplace.
P280 Wear protective gloves/ protective clothing/ eye protection/
face protection.
Response:
P301 + P312 + P330 IF SWALLOWED: Call a POISON
CENTER/ doctor if you feel unwell. Rinse mouth.
P301 + P330 + P331 IF SWALLOWED: Rinse mouth. Do NOT
induce vomiting.
P303 + P361 + P353 IF ON SKIN (or hair): Take off immediately
all contaminated clothing. Rinse skin with water/ shower.
P304 + P340 + P310 IF INHALED: Remove person to fresh air
and keep comfortable for breathing. Immediately call a POISON
CENTER/ doctor.
P305 + P351 + P338 + P310 IF IN EYES: Rinse cautiously with
water for several minutes. Remove contact lenses, if present
and easy to do. Continue rinsing. Immediately call a POISON
CENTER/ doctor.
P333 + P313 If skin irritation or rash occurs: Get medical advice/
attention.
P362 + P364 Take off contaminated clothing and wash it before
reuse.
Storage:
P405 Store locked up.
Disposal:
P501 Dispose of contents/ container to an approved waste dis-
posal plant.
Additional Labeling
There are no ingredients with unknown acute toxicity used in a mixture at a concentration >= 1%.
Other hazards
None known.
SECTION 3. COMPOSITION/INFORMATION ON INGREDIENTS
Mixtures
Components
Chemical name CAS-No. Classification Concentra-
tion (% w/w)
Safety Data Sheet
according to OSHA 1910.1200 Hazard Communication Standard
SikaBiresin CH161 6 (formerly EPOLAM 2070NA) Part
B
Revision Date 10/19/2023
Print Date 10/19/2023
3 / 11
Isophoronediamine 2855-13-2 Acute Tox. 4; H302
Skin Corr. 1B; H314
Eye Dam. 1; H318
Skin Sens. 1
A; H317
>= 90 – <=
100
Actual concentration is withheld as a trade secret
SECTION 4. FIRST AID MEASURES
General advice : Move out of dangerous area.
Consult a physician.
Show this material safety data sheet to the doctor in attend-
ance.
If inhaled : Move to fresh air.
Consult a physician after significant exposure.
In case of skin contact : Take off contaminated clothing and shoes immediately.
Wash off with soap and plenty of water.
Immediate medical treatment is necessary as untreated
wounds from corrosion of the skin heal slowly and with difficul-
ty.
In case of eye contact : Small amounts splashed into eyes can cause irreversible tis-
sue damage and blindness.
In the case of contact with eyes, rinse immediately with plenty
of water and seek medical advice.
Continue rinsing eyes during transport to hospital.
Remove contact lenses.
Keep eye wide open while rinsing.
If swallowed : Clean mouth with water and drink afterwards plenty of water.
Do not induce vomiting without medical advice.
Do not give milk or alcoholic beverages.
Never give anything by mouth to an unconscious person.
Take victim immediately to hospital.
Most important symptoms
and effects, both acute and
delayed
: Harmful if swallowed.
May cause an allergic skin reaction.
Causes serious eye damage.
Causes severe burns.
Health injuries may be delayed.
corrosive effects
sensitizing effects
Gastrointestinal discomfort
Allergic reactions
Dermatitis
Notes to physician : Treat symptomatically.
Safety Data Sheet
according to OSHA 1910.1200 Hazard Communication Standard
SikaBiresin CH161 6 (formerly EPOLAM 2070NA) Part
B
Revision Date 10/19/2023
Print Date 10/19/2023
4 / 11
SECTION 5. FIRE-FIGHTING MEASURES
Suitable extinguishing media : Use extinguishing measures that are appropriate to local cir-
cumstances and the surrounding environment.
Further information : Collect contaminated fire extinguishing water separately. This
must not be discharged into drains.
Fire residues and contaminated fire extinguishing water must
be disposed of in accordance with local regulations.
Special protective equipment
for fire-fighters
: In the event of fire, wear self-contained breathing apparatus.
SECTION 6. ACCIDENTAL RELEASE MEASURES
Personal precautions, protec-
tive equipment and emer-
gency procedures
: Use personal protective equipment.
Deny access to unprotected persons.
Environmental precautions
: Do not flush into surface water or sanitary sewer system.
If the product contaminates rivers and lakes or drains inform
respective authorities.
Local authorities should be advised if significant spillages
cannot be contained.
Methods and materials for
containment and cleaning up
: Soak up with inert absorbent material (e.g. sand, silica gel,
acid binder, universal binder, sawdust).
Keep in suitable, closed containers for disposal.
SECTION 7. HANDLING AND STORAGE
Advice on protection against
fire and explosion
: Normal measures for preventive fire protection.
Advice on safe handling : Avoid exceeding the given occupational exposure limits (see
section 8).
Do not get in eyes, on skin, or on clothing.
For personal protection see section 8.
Persons with a history of skin sensitization problems or asth-
ma, allergies, chronic or recurrent respiratory disease should
not be employed in any process in which this mixture is being
used.
Smoking, eating and drinking should be prohibited in the ap-
plication area.
Follow standard hygiene measures when handling chemical
products.
Conditions for safe stora
ge : Store in original container.
Safety Data Sheet
according to OSHA 1910.1200 Hazard Communication Standard
SikaBiresin CH161 6 (formerly EPOLAM 2070NA) Part
B
Revision Date 10/19/2023
Print Date 10/19/2023
5 / 11
Keep container tightly closed in a dry and well-ventilated
place.
Containers which are opened must be carefully resealed and
kept upright to prevent leakage.
Observe label precautions.
Store in accordance with local regulations.
Materials to avoid : Explosives
Oxidizing agents
Poisonous gases
Dangerous when wet
Flammable solids
Organic peroxides
Poisonous liquids
Spontaneously Combustible Substances
SECTION 8. EXPOSURE CONTRO LS/PERSONAL PROTECTION
Ingredients with workplace control parameters
Contains no substances with occupational exposure limit values.
Engineering measures : Use of adequate ventilation should be sufficient to control
worker exposure to airborne contaminants. If the use of this
product generates dust, fumes, gas, vapor or mist, use pro-
cess enclosures, local exhaust ventilation or other engineer-
ing controls to keep worker exposure below any recommend-
ed or statutor
y limits.
Personal protective equipment
Respiratory protection : Use a properly fitted NIOSH approved air-purifying or air-fed
respirator complying with an approved standard if a risk as-
sessment indicates this is necessary.
The filter class for the respirator must be suitable for the max-
imum expected contaminant concentration
(gas/vapor/aerosol/particulates) that may arise when han-
dling the product. If this concentration is exceeded, self-
contained breathing apparatus must be used.
Hand protection : Chemical-resistant, impervious gloves complying with an
approved standard should be worn at all times when handling
chemical products if a risk assessment indicates this is nec-
essary.
Eye protection : Safety eyewear complying with an approved standard should
be used when a risk assessment indicates this is necessary.
Skin and body protection : Choose body protection in relation to its type, to the concen-
tration and amount of dan
gerous substances, and to the spe-
Safety Data Sheet
according to OSHA 1910.1200 Hazard Communication Standard
SikaBiresin CH161 6 (formerly EPOLAM 2070NA) Part
B
Revision Date 10/19/2023
Print Date 10/19/2023
6 / 11
cific work-place.
Hygiene measures : Avoid contact with skin, eyes and clothing.
Wash hands before breaks and immediately after handling
the product.
Remove contaminated clothing and protective equipment
before entering eating areas.
Wash thoroughly after handling.
SECTION 9. PHYSICAL AND CHEMICAL PROPERTIES
Appearance : liquid
Color : colorless
Odor : amine-like
Odor Threshold : No data available
pH : Not applicable
Melting point/range / Freezing
poin
t
: No data available
Boiling point/boiling range
: 477 F / 247 C
Flash point : 234 F / 112 C
(Method: closed cup)
Evaporation rate : No data available
Flammability (solid, gas)
: No data available
Upper explosion limit / Upper
flammability limit
: No data available
Lower explosion limit / Lower
flammability limit
: No data available
Vapor pressure : 0.02 hpa
Relative vapor density : No data available
Density : 0.92 g/cm3 (68 F / 20 C)
Solubility(ies)
Water solubility : soluble
Solubility in other solvents : No data available
Safety Data Sheet
according to OSHA 1910.1200 Hazard Communication Standard
SikaBiresin CH161 6 (formerly EPOLAM 2070NA) Part
B
Revision Date 10/19/2023
Print Date 10/19/2023
7 / 11
Partition coefficient: n-
octanol/water
: No data available
Autoignition temperature : No data available
Decomposition temperature : No data available
Viscosity
Viscosity, dynamic : No data available
Viscosity, kinematic : > 20.5 mm2/s (104 F / 40 C)
Explosive properties : No data available
Oxidizing properties : No data available
Volatile organic compounds
(VOC) content
: Not applicable
SECTION 10. STABILITY AND REACTIVITY
Reactivity : No dangerous reaction known under conditions of normal use.
Chemical stability : The product is chemically stable.
Possibility of hazardous reac-
tions
: Stable under recommended storage conditions.
Conditions to avoid : No data available
Incompatible materials : No data available
Hazardous decomposition
products
: No decomposition if stored and applied as directed.
SECTION 11. TOXICOLOGICAL INFORMATION
Acute toxicity
Harmful if swallowed.
Components:
Isophoronediamine:
Acute oral toxicity : LD50 Oral (Rat): 1,030 mg/kg
Acute inhalation toxicity : LC50 (Rat): > 10 mg/l
Exposure time: 4 h
Test atmosphere: dust/mist
Acute dermal toxicity : LD50 (Rabbit): > 2,000 – 5,000 mg/kg
Safety Data Sheet
according to OSHA 1910.1200 Hazard Communication Standard
SikaBiresin CH161 6 (formerly EPOLAM 2070NA) Part
B
Revision Date 10/19/2023
Print Date 10/19/2023
8 / 11
Skin corrosion/irritation
Causes severe burns.
Serious eye damage/eye irritation
Causes serious eye damage.
Respiratory or skin sensitization
Skin sensitization
May cause an allergic skin reaction.
Respiratory sensitization
Not classified due to lack of data.
Germ cell mutagenicity
Not classified due to lack of data.
Carcinogenicity
Not classified due to lack of data.
IARC Not applicable
OSHA Not applicable
NTP Not applicable
Reproductive toxicity
Not classified due to lack of data.
STOT-single exposure
Not classified due to lack of data.
STOT-repeated exposure
Not classified due to lack of data.
Once sensitized, a severe allergic reaction may occur when subsequently exposed to very low levels.
Aspiration toxicity
Not classified due to lack of data.
SECTION 12. ECOLOGICAL INFORMATION
Ecotoxicity
Components:
Isophoronediamine:
Toxicity to algae/aquatic
plants
: ErC50 (Desmodesmus subspicatus (green algae)): > 10 – 100
mg/l
NOEC (Desmodesmus subspicatus (green algae)): 1.5 mg/l
Safety Data Sheet
according to OSHA 1910.1200 Hazard Communication Standard
SikaBiresin CH161 6 (formerly EPOLAM 2070NA) Part
B
Revision Date 10/19/2023
Print Date 10/19/2023
9 / 11
Persistence and degradability
No data available
Bioaccumulative potential
No data available
Mobility in soil
No data available
Other adverse effects
Product:
Additional ecological infor-
mation
: Do not empty into drains; dispose of this material and its con-
tainer in a safe way.
Avoid dispersal of spilled material and runoff and contact with
soil, waterways, drains and sewers.
SECTION 13. DISPOSAL CONSIDERATIONS
Disposal methods
Waste from residues : Disposal of this product, solutions and any by-products should
at all times comply with the requirements of environmental
protection and waste disposal legislation and any regional
local authority requirements.
Contaminated packaging : Empty containers should be taken to an approved waste han-
dling site for recycling or disposal.
SECTION 14. TRANSPORT INFORMATION
International Regulations
IATA-DGR
UN/ID No. : UN 2289
Proper shipping name : Isophoronediamine
Class : 8
Packing group : III
Labels : Corrosive
Packing instruction (cargo
aircraft)
: 856
Packing instruction (passen-
ger aircraft)
: 852
IMDG-Code
UN number : UN 2289
Proper shipping name : ISOPHORONEDIAMINE
Class : 8
Safety Data Sheet
according to OSHA 1910.1200 Hazard Communication Standard
SikaBiresin CH161 6 (formerly EPOLAM 2070NA) Part
B
Revision Date 10/19/2023
Print Date 10/19/2023
10 / 11
Packing group : III
Labels : 8
EmS Code : F-
A, S-B
Marine pollutant : no
Domestic regulation
49 CFR
UN/ID/NA number : UN 2289
Proper shipping name : Isophoronediamine
Class : 8
Packing group : III
Labels : CORROSIVE
ERG Code : 153
Marine pollutant : no
DOT: For Limited Quantity exceptions reference 49 CFR 173.154 (b)
IMDG: For Limited Quantity special provisions reference IMDG Code Chapter 3.4
Special precautions for user
The transport classification(s) provided herein are for informational purposes only, and solely based
upon the properties of the unpackaged material as it is described within this Safety Data Sheet.
Transportation classifications may vary by mode of transportation, package sizes, and variations in
regional or country regulations.
SECTION 15. REGULATORY INFORMATION
TSCA list : All chemical substances in this product are either listed as ac-
tive on the TSCA Inventory or are in compliance with a TSCA
Inventory exemption.
No substances are subject to a Significant New Use Rule.
No substances are subject to TSCA 12(b) export notification requirements.
CERCLA Reportable Quantity
This material does not contain any components with a CERCLA RQ.
SARA 304 Extremely Hazardous Substances Reportable Quantity
This material does not contain any components with a section 304 EHS RQ.
SARA 302 Extremely Hazardous Substances Threshold Planning Quantity
This material does not contain any components with a section 302 EHS TPQ.
SARA 311/312 Hazards
: Acute toxicity (any route of exposure)
Respiratory or skin sensitization
Skin corrosion or irritation
Serious eye damage or eye irritation
Safety Data Sheet
according to OSHA 1910.1200 Hazard Communication Standard
SikaBiresin CH161 6 (formerly EPOLAM 2070NA) Part
B
Revision Date 10/19/2023
Print Date 10/19/2023
11 / 11
SARA 313
: This material does not contain any chemical components with
known CAS numbers that exceed the threshold (De Minimis)
reporting levels established by SARA Title III, Section 313.
Clean Air Act
This product does not contain any hazardous air pollutants (HAP), as defined by the U.S. Clean Air
Act Section 112 (40 CFR 61).
California Prop. 65
This product does not contain any chemicals known to the State of California to cause cancer, birth,
or any other reproductive defects.
SECTION 16. OTHER INFORMATION
Full text of other abbreviations
Notes to Reader
The information contained in this Safety Data Sheet applies only to the actual Sika Corporation (“Sika”) product identified and described herein. This information is not intended to address, nor
does it address the use or application of the identified Sika product in combination with any other
material, product or process. All of the information set forth herein is based on technical data re-
garding the identified product that Sika believes to be reliable as of the date hereof. Prior to each
use of any Sika product, the user must always read and follow the warnings and instructions on
the product’s current Product Data Sheet, product label and Safety Data Sheet for each Sika
product, which are available at web site and/or telephone number listed in Section 1 of this SDS.
SIKA MAKES NO WARRANTIES EXPRESS OR IMPLIED AND ASSUMES NO LIABILITY
ARISING FROM THIS INFORMATION OR ITS USE. SIKA SHALL NOT BE LIABLE UNDER
ANY LEGAL THEORY FOR SPECIAL OR CONS EQUENTIAL DAMAGES AND SHALL NOT BE
RESPONSIBLE FOR THE USE OF THIS PRO DUCT IN A MANNER TO INFRINGE ON ANY
PATENT OR ANY OTHER INTELLECTUAL PR OPERTY RIGHTS HELD BY OTHERS.
All sales of Sika products are subject to its current terms and conditions of sale available at
www.sikausa.com or 201-933-8800.
Revision Date 10/19/2023
100000035745
US / Z8
by | Sep 27, 2025
