by | Sep 27, 2025
AXSON TECHNOLOGIES US
+1 248 588 2270
axsonmh@axson.com
axson-na.com
CHINA
+86 21 58 68 30 37
marketing.china@axson.com
GERMANY
+49 6 07 44 07 11-0
verkauf@axson.com
INDIA
+91 20 25 56 07 10-11
info.india@axson.com
ITALY
+39 02 96 70 23 36
axson@axson.it
JAPAN
+81 5 64 26 25 91
sales.japan@axson.com
FRANCE
Global Headquarters
+33 1 34 40 34 60
axson@axson.com
axson-technologies.com
MEXICO
+52 55 52 64 49 22
marketing@axson.com.mx
MIDDLE EAST
+971 7 2432227
axsonmideast@axson.com
SLOVAKIA
+42 1 76 42 25 26
axson.sk@axson.com
SPAIN
+34 9 32 25 16 20
spain@axson.com
U.K.
+44 16 38 66 00 62
sales.uk@axson.com
PRODUCT BULLETIN
www.axson-technologies.com 800.344.7776 axsonmh@axson.com
31200 Stephenson Hwy Madison Heights, MI 48071 Ph 248.588.2270 Fax 248.588.5909
DESCRIPTION:
Fast Patch Paste TCC-5220 A/B is a two-part system designed to quickly make repairs or modifications to the PP-1052 Pattern Plank
.
This material is available in convenient self-mixing cartridges for ease of use. A dispensing gun must be used to dispense this material.
Patch Paste TCC-5220 A/B will cure rapidly and can be machined or sanded in approximately 15 – 20 minutes.
TYPICAL HANDLING CHARACTERISTICS @ 77 F (25 C)
Mix Ratio (by weight or volume) ………………………………………………………………….. Resin TCC-5220A ……………………….100 parts
………………………………………………………………………………………………………………. Hardener TCC-5220B ………………….100 parts
Pot Life (50 gram mass) …………………………………………………………………………………………………………………………………3 minutes
Hardness ……………………………………………………………………………………………………………………………………………………..80 – 85 Shore D
Viscosity ………………………………………………………………………………………………….. Resin TCC-5220A ……………………….26,000 cps
………………………………………………………………………………………………………………. Hardener TCC-5220B ………………….20,000 cps
………………………………………………………………………………………………………………. Mixed Viscosity …………………………..Paste
Specific Gravity …………………………………………………………………………………………………………………………………………….1.03g/cc
Color ……………………………………………………………………………………………………….. Resin TCC-5220A ……………………….Brown
………………………………………………………………………………………………………………. Hardener TCC-5220B ………………….Red
………………………………………………………………………………………………………………. Mixed Color ………………………………..Red
Machinability …………………………………………………………………………………………………………………………………………………Good
Time to Machine or Sand (depending on temperature) ……………………………………………………………………………………….15 – 20 minutes
Shelf Life (in original unopened containers) ………………………………………………….. TCC-5220A/TCC-5220B ………………2 years
Standard Size Available: 50ml cartridge
SANITARY PRECAUTIONS:
Do not take internally. Avoid prolonged breathing of vapors. Work in a well-ventilated area. Avoid skin contact. Protective gloves
should be worn. If contact occurs: wash skin with soap and water. Avoid eye contact. If contact occurs: rinse well with water for 15
minutes, contact physician.
STORAGE AND HANDLING:
To avoid moisture contamination, with each new nozzle purge small amount of material. Store at room temperature.
TCC-5220 Tech/Revised 1/30/15
Supersedes 6/20/14
The information contained in this technical data sheet results from research and tests conducted in our laboratories under precise conditions. Seller
cannot anticipate all conditions under which seller s products, or the products of other manufacturers in combination with seller s products, may be used.
It is the responsibility of the user to determine the suitability of the Axson Technologies products, under their own conditions, before commencing with
the proposed application. In no event shall Axson Technologies, Inc. be liable for any direct, indirect, punitive, incidental, special, and/or consequential
damages, to property or life, whatsoever arising out of or connected with the use or misuse of our products.
TCC-5220 A/B
FAST PATCH PASTE
FOR PP-1052
PATTERN PLANK
by | Sep 27, 2025
TECHNICAL DATA SHEET
TCC-410
February 19, Version 01 /2021
1
TECHNICAL DATA SHEET
TCC-410
February 19, Version 01 /2021
1
TECHNICAL DATA SHEET
TCC-410
SURFACE/MASS CASTING SYSTEM
IMPACT RESISTANT
DESCRIPTION
Epoxy Resin TCC-410 is an aluminum filled system designed for high-impact resistance. This system can be surface
cast to metal or other low-cost cores or it may be mass casted. Depending on thickness of cast, a choice of hardeners
is provided to control exothermic heat and shrinkage. Applications for this system include casting surfaces on
prototype stamping dies or mass casting applications where high-impact resistance is desired.
APPLICATIONS
Casting surfaces on prototype stamping dies
Mass casting applications
TECHNICAL DATA SHEET
TCC-410
February 19, Version 01 /2021
2
PHYSICAL PROPERTIES
Thickness of Cast > Surface Cast – 1 Mass Cast 1 – 4 Mass Cast 4 – 10
Hardener Selection TCC-104 TCC-104-5 TCC-105
Mix Ratio (parts by weight):
Resin TCC-410 100 parts 100 parts 100 parts
Hardener 10 parts 10 parts 10 parts
Pot Life (500 gram mass) 60 minutes 100 minutes 2 – 3 hours
Peak Exotherm 200 F (93 C)
Peak Operating Temperature 180 F (82 C) 210 F (99 C) 240 F (116 C)
Cure Time 8 – 12 hours 18- 36 hours 48 – 72 hours
TYPICAL PHYSICAL PROPERTIES with TCC-104 H @ 77 F (25 C) Cured 7 days @ R.T.
Specific Gravity (g/cc) 1.65
Mixed Viscosity – (cps & mPa.s)_ 6,000
Cured Color – Visual Aluminum – Gray
Hardness – (Shore D) 84
Linear Shrinkage (in/in) 0.0015
Notched Izod Impact Strength – (ft lbs/in) 8.5
Tensile Strength – psi (MPa) 7,000 (48)
Shelf Life (in original unopened containers) TCC-401/TCC-104, TCC-104-5, or TCC-105
2
years
HANDLING PRECAUTIONS
Normal health and safety precautions should be observed when handling these products:
Ensure good ventilation.
Wear gloves, glasses and protective clothes.
For further information, please consult the Safety Data Sheets.
STORAGE CONDITIONS
This product has a shelf life of 24 months for the resin and hardener as indicated by the
expiration date on the container when stored in original unopened containers.
PACKAGING
Packaging information on request, please contact your local sales representative or find your
local contact on www.sikaadvancedresins.us
LEGAL NOTICE
The information, and, in particular, the recommendations relating to the application and
end-use of Sika products, are given in good faith based on Sika s current knowledge and
experience of the products when properly stored, handled and applied under normal
conditions in accordance with Sika s recommendations. In practice, the differences in
materials, substrates and actual site conditions are such that no warranty in respect of
merchantability or of fitness for a particular purpose, nor any liability arising out of any legal
relationship whatsoever, can be inferred either from this information, or from any written
recommendations, or from any other advice offered. The user of the
TECHNICAL DATA SHEET
TCC-410
February 19, Version 01 /2021
3
product must test the product s suitability for the intended application and purpose. Sika
reserves the right to change the properties of its products. The proprietary rights of third
parties must be observed. All orders are accepted subject to our current terms of sale and
delivery. Users must always refer to the most recent issue of the local Product Data Sheet
for the product concerned, copies of which will be supplied on request.
CONTACT
UNITED STATES
Sika Corporation
30800 Stephenson Highway
Madison Heights, Michigan 48071 USA
Tel.: (+1) 248 588-2270
Fax: (+1) 248 577-0810
E-mail: advanced.resins@us.sika.com
Website: www.sikaadvancedresins.us
by | Sep 27, 2025
TC-4485 A/B Page 1 of 2 Date: 12/18/2015
For more information call BJB Enterprises, Inc. (714) 734-8450 Fax (714) 734-8929
www.bjbenterprises.com
Quality Management
System Registered
to ISO 9001:2008
TC-4485 A/B
IRON-FILLED EPOXY MASS CASTING SYSTEM
TC-4485 A/B is a room temperature curing, mass castable epoxy resin system that produces a tough, dense, low shrink solid
material with fine detail reproduction. TC-4485 A/B is designed for single-pour castings up to 3″ thick, or for thicker castings up
to 8″ using a stage pour procedure.
Slower reacting system designed for thicker casts Improved viscosity for easier pouring
TYPICAL PRODUCT USES :
Molds Patterns
Cast Parts Form Dies
PHYSICAL PROPERTIES TEST METHOD TEST RESULTS
Hardness, Shore D ASTM D2240 85 2
Density (g/cc) ASTM D792 2.1
Cubic Inches per Pound N/A 13.1
Tensile Modulus (psi) ASTM D638 5.2 x 10
7
Flexural Strength (psi) ASTM D790 9,450
Flexural Modulus (psi) ASTM D790 3.2 x 10
5
Izod Impact (ft-lb/in) ASTM D256 2.0
Shrinkage (in/in) ASTM D2566 <0.001
Compressive Strength (psi) ASTM D695 13,320
Coefficient of Thermal Expansion (in/in/F ) ASTM D3386 3.0 x 10
-5
HANDLING PROPERTIES Part A Part B
Mix Ratio by weight 100 8
Mix Ratio by volume 100 15
Specific Gravity @ 77 F (25 C) 1.80 0.99
Color Black Amber
Viscosity (cps) @ 77 F (25 C) Brookfield 278,000 70
Mixed Viscosity (cps) @ 77 F (25 C) Brookfield 42,500
Work Time, 1 lb. mass @ 77 F (25 C) 3 0.5 hours
Demold Time @ 77 F (25 C) 16 24 hours
Cure Time @ 77 F (25 C) 3 5 days
Properties above are typical and not for specifications.
EPOXY RESIN SYSTEMS
Dedicated to QUALITY, SERVICE, SAFETY, and INNOVATION
TC-4485 A/B Page 2 of 2 Date: 12/18/2015
For more information call BJB Enterprises, Inc. (714) 734-8450 Fax (714) 734-8929
NON-WARRANTY "Except for a warranty that materials substantially comply with the data presented in Manufacturer's latest bulletin describing the product (the basis for this substantial
compliance is to be determined by the standard quality control tests generally performed by Manufacturer), all materials are sold "AS IS" and without any warranty express or implied as
to merchantability, fitness for a particular purpose, patent, trademark or copyright infringement, or as to any other matter. In no event shall Manufacturer's liability for damages exceed
Manufacturer's sale price of the particular quantity with respect to which damages are claimed."
Quality Management
System Registered
to ISO 9001:2008
STORAGE:
Store at ambient temperatures, 65-80 F (18-27 C). Unopened containers will have a shelf life of 12 months from date of shipment
when properly stored at recommended temperatures. Purge opened containers with dry nitrogen before re-sealing.
PACKAGING Part A Part B Cubic Inches per Kit
5-Gallon Kits 60 lbs. 5 lbs. 852
SAFETY PRECAUTIONS :
Use in a well-ventilated area. Avoid contact with skin using protective gloves and protective clothing. Repeated or prolonged contact
on the skin may cause an allergic reaction. Eye protection is extremely important. Always use approved safety glasses or goggles
when handling this product.
IF CONTACT OCCURS :
Skin: Immediately wash with soap and water. Remove contaminated clothing and launder before reuse. It is not recommended
to remove resin from skin with solvents. Solvents only increase contact and dry skin. Seek qualified medical attention if
allergic reactions occur.
Eyes: Immediately flush with water for at least 15 minutes. Call a physician.
Ingestion: If swallowed, call a physician immediately. Remove stomach contents by gastric suction or induce vomiting only as
directed by medical personnel. Never give anything by mouth to an unconscious person.
Refer to the Material Safety Data Sheet before using this product.
TC-4485 Part A SDS TC-4485 Part B SDS
by | Sep 27, 2025
TC-1614 A/B Page 1 of 3 Date: 09/29/2020
For more information call BJB Enterprises, Inc. (714) 734-8450 Fax (714) 734-8929
www.bjbenterprises.com
TC-1614 A/B
EPOXY PENETRATING
SEALING AND COATING RESIN SYSTEM
TC-1614 A/B is an unfilled, low viscosity epoxy resin system. It is designed to seal porous to semi-porous substrates developing
remarkable strength. TC-1614 A/B also has exceptional adhesive characteristics and is capable of high temperatures.
Easy to use and apply Withstands temperatures up to 350 F (177 C)
Penetrates and seals porous surfaces with excellent adhesion Can be pigmented for color enhancement
Works great for sealing 3D Printed parts Recommended by several 3D Printer Manufacturers
PHYSICAL PROPERTIES TEST METHOD TEST RESULTS
Hardness, Shore D ASTM D2240 85 2
Density (g/cc) ASTM D792 1.14
Cubic Inches per Pound N/A 25.1
Color/Appearance Visual Yellow Opaque
Tensile Strength (psi) ASTM D638 9,500
Tensile Modulus (psi) ASTM D638 320,000
Elongation (%) ASTM D638 5
Flexural Strength (psi) ASTM D790 12,600
Flexural Modulus (psi) ASTM D790 380,000
Shrinkage (in/in) linear 12 x x 0.008
Izod Impact, notched (ft-lb/in) ASTM D256 0.44
Reported physical properties based on elevated temperature cured test specimens.
HANDLING PROPERTIES Part A Part B
Mix Ratio by weight 100 20
Mix Ratio by volume 100 23
Specific Gravity @ 77 F (25 C) 1.13 0.98
Color Colorless Amber
Viscosity (cps) @ 77 F (25 C) Brookfield 550 250
Mixed Viscosity (cps) @ 77 F (25 C) Brookfield 600
Work Time, 100g mass @ 77 F (25 C) 2 hours
Tack Free
10 12 hours @ 77 F (25 C)
5 hours @ 120 F (48.9 C)
Properties above are typical and not for specifications.
*Application Procedures see page 3
EPOXY RESIN SYSTEMS
Dedicated to QUALITY, SERVICE, SAFETY, and INNOVATION
An ISO-9001 Certified company
TC-1614 A/B Page 3 of 3 Date: 09/29/2020
For more information call BJB Enterprises, Inc. (714) 734-8450 Fax (714) 734-8929
NON-WARRANTY “Except for a warranty that materials substantially comply with the data presented in Manufacturer’s latest bulletin describing the product (the basis for this substantial
compliance is to be determined by the standard quality control tests generally performed by Manufacturer), all materials are sold “AS IS” and without any warranty express or implied as
to merchantability, fitness for a particular purpose, patent, trademark or copyright infringement, or as to any other matter. In no event shall Manufacturer’s liability for damages exceed
Manufacturer’s sale price of the particular quantity with respect to which damages are claimed.”
POST CURING:
All physical property results are based upon post-curing this system. The following procedure provides the best results:
150 F (66 C) for 1.5 to 2 hours
250 F (121 C) for 2 hours
300 F (149 C) for 1 hour
350 F (177 C) for 1 hour
Allow to cool in the oven. This procedure provides further stabilization and eliminates possible thermal shocks for cavity tools that are
temporarily clamped together for curing purposes.
STORAGE:
Store at ambient temperatures, 65-80 F (18-27 C). Unopened containers will have a shelf life of 12 months from date of shipment
when properly stored at recommended temperatures. Purge opened containers with dry nitrogen before re-sealing.
PACKAGING Part A Part B
Cubic Inches
per Kit
Quart Kits 2 lbs. 7 oz. 61
Gallon Kits 9 lbs. 1.8 lbs. 271
5-Gallon Kits 40 lbs. 8 lbs. 1,205
SAFETY PRECAUTIONS :
Use in a well-ventilated area. Avoid contact with skin using protective gloves and protective clothing. Repeated or prolonged contact
on the skin may cause an allergic reaction. Eye protection is extremely important. Always use approved safety glasses or goggles
when handling this product.
IF CONTACT OCCURS :
Skin: Immediately wash with soap and water. Remove contaminated clothing and launder before reuse. It is not recommended
to remove resin from skin with solvents. Solvents only increase contact and dry skin. Seek qualified medical attention if
allergic reactions occur.
Eyes: Immediately flush with water for at least 15 minutes. Call a physician.
Ingestion: If swallowed, call a physician immediately. Remove stomach contents by gastric suction or induce vomiting only as
directed by medical personnel. Never give anything by mouth to an unconscious person.
Refer to the Material Safety Data Sheet before using this product.
WARNING: This product can expose you to chemicals including Ethylbenzene and 4,4 -Isopropylidenediphenol, which are known to
the State of California to cause cancer, birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
TC-1614 A/B Page 3 of 3 Date: 09/29/2020
For more information call BJB Enterprises, Inc. (714) 734-8450 Fax (714) 734-8929
NON-WARRANTY “Except for a warranty that materials substantially comply with the data presented in Manufacturer’s latest bulletin describing the product (the basis for this substantial
compliance is to be determined by the standard quality control tests generally performed by Manufacturer), all materials are sold “AS IS” and without any warranty express or implied as
to merchantability, fitness for a particular purpose, patent, trademark or copyright infringement, or as to any other matter. In no event shall Manufacturer’s liability for damages exceed
Manufacturer’s sale price of the particular quantity with respect to which damages are claimed.”
Product Application Procedure for 3D Printed Parts
Material: TC-1614 Epoxy
Purpose of Procedure: To impregnate rigid, porous 3D Printed Parts with epoxy. Infusing epoxy into the surface is a
beneficial procedure to increase strength, improve handling qualities and in some parts, improve aesthetics. Some
systems will absorb more material than others.
Procedure:
Pre-warm A&B material in separate containers to 90 -100 F maximum (32 -37 C max) in a temperature
controlled industrial oven. This will help to lower the viscosity and increase the absorption rate of epoxy into
the part (never use a household oven that may be in contact with food).
You can also pre-warm the 3D printed part to aid in epoxy infiltration. 100 -120 F (37 -49 C) is a good range
but refer to your 3D printed material recommendations for heat resistance in an effort to avoid distortion.
Place a small 3D Printed Part into a self-sealing (zipper lock) plastic bag and fill with an appropriate amount
of epoxy. A bag that is too large will require more volumetric amounts of epoxy. Squeeze out as much of the
extra air in the bag to assure part is fully submerged and coated with epoxy then seal bag.
Allow the part to soak in the epoxy for roughly 20-25 minutes. A recommended optional procedure would be
to place bag with soaking 3D Printed part into 100 -120 F (37 -49 C) oven in a leak-proof, metal container,
and allow to soak for 15-20 minutes. Check part at 5 minute intervals to monitor viscosity levels and for any
exothermic reaction. Larger batches of mixed epoxy will have a shorter reaction time.
Once part has soaked for allotted time, pull part out of bag and drain excess epoxy off of part.
For larger parts, mix enough A&B together so you have sufficient material to brush an even coat over the part.
Continue brushing drips and runs to keep part coated for 20-30 minutes. Then drain off excess epoxy and
wipe down surface with clean, dry paper towels. Avoid using any solvents since it will affect the curing
properties.
*Note that mixing a large mass of epoxy can produce an increase in chemical reaction shortening work time
and increasing exotherm (heat) as it sits. Do not leave a large, concentrated mass of epoxy in a container
unattended. After soaking the part, it may be best to split up a large batch (over 200-300g) by draining the
bag into 2-3 separate small containers and allow to harden.
Hang part with wire over a cup or bucket to allow continued drainage of excess epoxy. Wipe off any areas of
pooled epoxy with a gloved finger or brush. Monitor any sags or drips for the next hour or until epoxy has
gelled.
You can expedite curing of the epoxy in an oven at 100 -120 F (37 -49 C) and promote better physical
properties of the finished material. You can also allow the epoxy to cure at room temperature but an elevated
post cure will achieve the best results.
by | Sep 27, 2025
EPOff RESTw SySTEMS
” I) t: rl i c u t etl t o QU
A L I TY, S ti R r l c jt.
s.,l t; liI’t” a n
by | Sep 27, 2025
TC-1570 A/B Page 1 of 2 Date: 02/13/2020
For more information call BJB Enterprises, Inc. (714) 734-8450 Fax (714) 734-8929
www.bjbenterprises.com
TC-1570 A/B
WHITE EPOXY SURFACE COAT
TC-1570 A/B is a general-purpose white epoxy surface coat that can be used in conjunction with epoxy or polyurethane resin
systems. TC-1570 A/B is noted for its ease of application and its ability to hang on vertical surfaces without sag or runoff.
PHYSICAL PROPERTIES TEST METHOD RESULTS
Hardness, Shore D ASTM D2240 90 2
Density (g/cc) ASTM D792 1.92
Cubic Inches per Pound N/A 13.7
Color/Appearance Visual White Opaque
Flexural Strength (psi) ASTM D790 8,100
Flexural Modulus (psi) ASTM D790 9.5 x 10
5
Heat Deflection Temperature @ 66 psi ASTM D648 220 F (104.4 C)
Heat Deflection Temperature @ 264 psi ASTM D648 217 F (102.8 C)
HANDLING PROPERTIES Part A Part B
Mix Ratio by weight 100 8
Specific Gravity @ 77 F (25 C) 2.1 1.08
Mixed Viscosity (cps) @ 77 F (25 C) Brookfield Brushable
Work Time, 100g mass @ 77 F (25 C) 15 20 minutes
Cure Schedule 8 12 hours
Properties above are typical and not for specifications.
STORAGE:
Store at ambient temperatures, 65-80 F (18-27 C). Unopened containers will have a shelf life of 12 months from date of
shipment when properly stored at recommended temperatures. Purge opened containers with dry nitrogen before re-sealing.
PACKAGING Part A Part B
Square Inches
per Kit
(Coverage @ 1/16 thick)
Quart Kits 3 lbs. 4 oz. 712
Gallon Kits 10 lbs. 13 oz. 2,370
5-Gallon Kits 45 lbs. 3.6 lbs. 10,653
EPOXY RESIN SYSTEMS
Dedicated to QUALITY, SERVICE, SAFETY, and INNOVATION
An ISO-9001 Certified company
TC-1570 A/B Page 2 of 2 Date: 02/13/2020
For more information call BJB Enterprises, Inc. (714) 734-8450 Fax (714) 734-892
NON-WARRANTY “Except for a warranty that materials substantially comply with the data presented in Manufacturer’s latest bulletin describing the product (the basis for this substantial
compliance is to be determined by the standard quality control tests generally performed by Manufacturer), all materials are sold “AS IS” and without any warranty express or implied as
to merchantability, fitness for a particular purpose, patent, trademark or copyright infringement, or as to any other matter. In no event shall Manufacturer’s liability for damages exceed
Manufacturer’s sale price of the particular quantity with respect to which damages are claimed.”
SAFETY PRECAUTIONS :
Use in a well-ventilated area. Avoid contact with skin using protective gloves and protective clothing. Repeated or
prolonged contact on the skin may cause an allergic reaction. Eye protection is extremely important. Always use approved
safety glasses or goggles when handling this product.
IF CONTACT OCCURS :
Skin: Immediately wash with soap and water. Remove contaminated clothing and launder before reuse. It is not
recommended to remove resin from skin with solvents. Solvents only increase contact and dry skin. Seek
qualified medical attention if allergic reactions occur.
Eyes: Immediately flush with water for at least 15 minutes. Call a physician.
Ingestion: If swallowed, call a physician immediately. Remove stomach contents by gastric suction or induce vomiting
only as directed by medical personnel. Never give anything by mouth to an unconscious person.
Refer to the Material Safety Data Sheet before using this product.
WARNING: This product can expose you to chemicals including 4,4 -Isopropylidenediphenol, which are known to
the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to
www.P65Warnings.ca.gov.
TC-1570 Part A SDS TC-1570 Part B SDS
by | Sep 27, 2025
Full General Datasheet
PDS-Spabond340LV(HT)-12-0219 1
SPABOND 340LV HT
HIGH TG STRUCTURAL EPOXY ADHESIVE
Reduced component weights; lower density when compared to glass filled
adhesives
Higher thermal performance & fast cure progression
High strength and toughness industrial adhesive
Excellent gap filling properties
Designed for cartridge and mixing machine dispense
Three hardener speeds give a range of working times / clamp times
Resin & hardener are pigmented to give a visual indication of mix quality
DNV-GL Certified Formats Available
INTRODUCTION
Spabond 340 LV HT is a high performance adhesive designed for bonding large structures such as yacht hulls
and wind turbine blades. It is a cost-effective system with good thermal and mechanical properties.
The formulation gives high thermal performance and allows fast curing, making this product ideal for bonding large
composite structures where minimising cure time and increasing productivity is of value.
The components are pigmented to give a visual indication of mix quality, which is a useful feature when mixing by hand or
with a machine. The system has a simple 2:1 mix ratio by volume.
Spabond 340LV HT is available in cartridges, straight-sided pails and 205 litre drums for machine mixing and dispense.
SYSTEM 20 C POT-LIFE (500 G, MIXED IN AIR)* 20 C CLAMP TIME* PAGE
S
pabond
340LV
Product Information, Instructions for Use and Health & Safety 2
Fast (HT) 16 minutes 3 hours 50 minutes 3
Slow (HT) 45 minutes 17 hours 40 minutes 4
Extra Slow (HT) 2 hours 20 minutes 24 hours 5
*working time properties are highly subjective to ambient conditions and should be used an approximate guideline for all Spabond 340 systems
PDS-Spabond340LV(HT)-12-0219 2
PRODUCT INFORMATION
The product is available in a number of formats please contact
your local customer support or download the latest product
catalogue available on www.gurit.com.
PRODUCT DESCRIPTION STATUS CERTIFICATION
Spabond 340LV Resin and HT Hardeners Approved
DNV-GL
TAK00001H8
TRANSPORT & STORAGE
The resin and hardeners should be kept in securely closed containers during transport
and storage. Any accidental spillage should be soaked up with sand, sawdust, cotton
waste or any other absorbent material. The area should then be washed clean (see
appropriate Safety Data Sheet). Adequate long term storage conditions will result in a
shelf life of 2 years for both the resin and hardeners. Storage should be in a warm dry place out of direct sunlight and protected from frost.
The storage temperature should be kept constant between 10 C and 25 C, cyclic fluctuations in temperature can cause crystallization.
Containers should be firmly closed. Hardeners, in particular, will suffer serious degradation if left exposed to air.
For more information on crystallization please refer to the Adhesives section on the Gurit website. (www.gurit.com)
COMPONENT UNITS 10 25 C
Spabond 340LV Resin months 24
Spabond 340 HT Hardeners months 24
INSTRUCTIONS FOR USE
The product is optimised for use at 15 – 25 C. At lower temperatures the components thicken and may eventually become unworkable. To
ensure accurate mixing and good workability pre-warm the resin & hardener as well as the surfaces to be bonded before use.
SURFACE PREPARATION
Before using the product ensure that surfaces to be bonded are clean, dry and dust-free. Prepare all surfaces by abrading with medium grit
paper or other suitable abrasive, remove dust then wipe with acetone.
Metals – requires a chemical pre-treatment to create the best bond. Please contact Gurit for a Guide to Surface Preparation and Pre-treatments.
Polyester or vinylester – ensure laminates are fully cured before bonding, then prepare as above.
Epoxy laminates – it is recommended to use a suitable Peel Ply as the last stage in their manufacture, otherwise prepare as above. Trials may
be required to test Peel Ply suitability.
Ferrocement – etch with 5% solution of hydrochloric acid, wash with fresh water, then dry.
Timber – sand with abrasive paper across grain. Degrease oily timber with a fast evaporating solvent (e.g. acetone). For resinous or gummy
timber, etch with 2% caustic soda solution, wash off with fresh water and dry.
MIXING & HANDLING
Gurit recommends mixing machine dispense. If mixing by hand, mix thoroughly for at least one minute, paying particular attention to the sides
and bottom of the mixing vessel, to ensure no streaks remain. Once fully mixed the adhesive should have a uniform colour. Use from pot quickly
to maximise resin working life.
CARTRIDGE USE
If dispensing product from a two component cartridge, first prime the cartridge by dispensing slowly until both resin and hardener are at the
outlet of the cartridge. Secondly, clean the outlet and attach the mixing head. When starting a new cartridge, dispense and discard a small
amount of adhesive (typically the length of a mix head) prior to applying adhesive to the substrate, in order to ensure thorough mixing of the
system. If using a pneumatic gun, regulate supply air pressure to a maximum of 4 Bar. Relieve the pressure on the cartridge after use.
HEALTH AND SAFETY
The following points must be considered:
1. Skin contact must be avoided by wearing protective gloves. Gurit recommends the use of disposable nitrile gloves for most applications.
The use of barrier creams is not recommended, but to preserve skin condition a moisturising cream should be used after washing.
2. Overalls or other protective clothing should be worn when mixing, laminating or sanding. Contaminated work clothes should be thoroughly
cleaned before re-use.
3. Eye protection should be worn if there is a risk of resin, hardener, solvent or dust entering the eyes. If this occurs flush the eye with water
for 15 minutes, holding the eyelid open, and seek medical attention.
4. Ensure adequate ventilation in work areas. Respiratory protection should be worn if there is insufficient ventilation. Solvent vapours should
not be inhaled as they can cause dizziness, headaches, loss of consciousness and can have long term health effects.
5. If the skin becomes contaminated, then the area must be immediately cleansed. The use of resin-removing cleansers is recommended. To
finish, wash with soap and warm water. The use of solvents on the skin to remove resins etc must be avoided.
Washing should be part of routine practice:
before eating or drinking
before smoking
before using the lavatory
after finishing work
6. The inhalation of sanding dust should be avoided and if it settles on the skin then it should be washed off. After more extensive sanding
operations a shower/bath and hair wash is advised.
APPLICABLE RISK & SAFETY PHRASES
Gurit produces a separate full Safety Data Sheet for all hazardous products. Please ensure that you have the correct SDS to hand for the
materials you are using before commencing work.
PDS-Spabond340LV(HT)-12-0219 3
SPABOND 340LV & HT FAST HARDENER
This 1 page product summary is intended for use in conjunction with further advice provided under the Instructions for Use section. All data has
been generated from typical production material and does not constitute a product specification.
MIXING AND HANDLING
PROPERTY UNITS Spabond 340LV RESIN FAST HARDENER MIXED SYSTEM TEST METHOD
Appearance – colour Description Yellow Red Pink –
Appearance – form Description Thixotropic Paste –
Mix ratio by weight Parts by weight 100 49 –
Mix ratio by volume Parts by volume 100 50 – –
Density at 21 C g/cm
3
1.13 1.10 1.11 Archimedes
COMPONENT & MIXED SYSTEM VISCOSITY
PROPERTY UNITS 15 C 20 C 25 C 30 C TEST METHOD
Spabond 340LV Resin Viscosity P 490 290 257 130 –
Spabond 340LV HT Fast Hardener Viscosity P 713 472 322 259 –
Initial Mixed System Viscosity P 733 427 275 196 –
Pot-life (500 g, mixed in air)* hrs:min 00:20 00:16 00:12 00:10 –
Clamp Time*
(time to 2kN cleavage strength)
hrs:min 05:12 03:50 02:50 02:05 BS 5350 Part C1
Sag resistance* mm – 20 20 – –
ADHESIVE PERFORMANCE
MECHANICAL PROPERTIES SYMBOL UNITS 28 DAYS AT 21 C 16 HOURS AT 50 C** 5 HOURS AT 70 C** TEST STANDARD
Cleavage on steel Fcleavage kN 9.2 11.3 7.8 BS 5350 Part C1
Lap shear on steel steel MPa 29 31 30 BS 5350 Part C5
CURED MECHANICAL AND THERMAL PROPERTIES
MECHANICAL PROPERTIES SYMBOL UNITS 28 DAYS AT 21 C 16 HOURS AT 50 C** 5 HOURS AT 70 C** TEST STANDARD
Glass Transition Temperature Tg1 C 54 67 71 ISO 6721 (DMA)
Cured Density ply g/cm
3
1.17 1.17 1.17 Archimedes
Volumetric Shrinkage % 5.77 5.41 5.32 Archimedes
Tensile Strength T MPa 37 50 48 ISO 527-2
Tensile Modulus ET GPa 2.85 2.77 2.75 ISO 527-2
Tensile Strain T % 7.73 9.07 10.1 ISO 527-2
3-point flexural strength F N/mm
2
72 85 83 ISO 178
3-point flexural modulus EF GPa 2.75 2.53 2.46 ISO 178
Charpy (notched) kJ/m
2
1.49 2.26 1.91 ISO 179-1
*working time properties are highly subjective to ambient conditions and should be used an approximate guideline for all Spabond 340 systems
**initial cure of 24 hours at 21 C
PDS-Spabond340LV(HT)-12-0219 4
SPABOND 340LV & HT SLOW HARDENER
This 1 page product summary is intended for use in conjunction with further advice provided under the Instructions for Use section. All data
has been generated from typical production material and does not constitute a product specification.
MIXING AND HANDLING
PROPERTY UNITS Spabond 340LV RESIN SLOW HARDENER MIXED SYSTEM TEST METHOD
Appearance – colour Description Yellow Purple Grey –
Appearance – form Description Thixotropic Paste
–
Mix ratio by weight Parts by weight 100 49 –
Mix ratio by volume Parts by volume 100 50 – –
Density at 21 C g/cm
3
1.13 1.11 1.12 Archimedes
COMPONENT & MIXED SYSTEM VISCOSITY
PROPERTY UNITS 15 C 20 C 25 C 30 C TEST METHOD
Spabond 340LV Resin Viscosity P 490 290 257 130 –
Spabond 340LV HT Slow Hardener Viscosity P 559 391 282 232 –
Initial Mixed System Viscosity P 673 403 264 190 –
Pot-life (500 g, mixed in air)* hrs:min 01:00 00:45 00:34 00:26 –
Clamp Time*
(time to 2kN cleavage strength)
hrs:min 23:00 17:40 13:30 10:20 BS 5350 Part C1
Sag resistance* mm – 20 20 – –
ADHESIVE PERFORMANCE
MECHANICAL PROPERTIES SYMBOL UNITS 28 DAYS AT 21 C 16 HOURS AT 50 C** 5 HOURS AT 70 C** TEST STANDARD
Cleavage on steel Fcleavage kN 8.9 12.0 10.1 BS 5350 Part C1
Lap shear on steel steel MPa 32 37 36 BS 5350 Part C5
CURED MECHANICAL AND THERMAL PROPERTIES
MECHANICAL PROPERTIES SYMBOL UNITS 28 DAYS AT 21 C 16 HOURS AT 50 C** 5 HOURS AT 70 C** TEST STANDARD
Glass Transition Temperature Tg1 C 52 66 72 ISO 6721 (DMA)
Cured Density ply g/cm
3
1.18 1.17 1.17 Archimedes
Volumetric Shrinkage % 5.18 4.64 4.29 Archimedes
Tensile Strength T MPa 34 49 49 ISO 527-2
Tensile Modulus ET GPa 2.93 2.58 2.89 ISO 527-2
Tensile Strain T % 6.31 7.83 8.28 ISO 527-2
3-point flexural strength F N/mm
2
68 85 87 ISO 178
3-point flexural modulus EF GPa 3.04 2.62 2.67 ISO 178
Charpy (notched) kJ/m
2
1.42 2.53 2.56 ISO 179-1
*working time properties are highly subjective to ambient conditions and should be used an approximate guideline for all Spabond 340 systems
**initial cure of 24 hours at 21 C
PDS-Spabond340LV(HT)-12-0219 5
SPABOND 340LV & HT EXTRA-SLOW HARDENER
This 1 page product summary is intended for use in conjunction with further advice provided under the Instructions for Use section. All data
has been generated from typical production material and does not constitute a product specification.
MIXING AND HANDLING
PROPERTY UNITS Spabond 340LV RESIN X-SLOW HARDENER MIXED SYSTEM TEST METHOD
Appearance – colour Description Yellow Blue Green –
Appearance – form Description Thixotropic Paste –
Mix ratio by weight Parts by weight 100 47 –
Mix ratio by volume Parts by volume 100 50 – –
Density at 21 C g/cm
3
1.13 1.05 1.11 Archimedes
COMPONENT & MIXED SYSTEM VISCOSITY
PROPERTY UNITS 15 C 20 C 25 C 30 C TEST METHOD
Spabond 340LV Resin Viscosity P 490 290 257 130 –
Spabond 340LV HT Extra-Slow Hardener Viscosity P 578 330 215 150 –
Initial Mixed System Viscosity P 683 381 242 167 –
Pot-life (500 g, mixed in air)* hrs:min 03:10 02:20 01:40 01:15 –
Clamp Time*
(time to 2kN cleavage strength)
hrs:min 33:50 24:00 14:50 10:30 BS 5350 Part C1
Sag resistance* mm – 20 20 – –
ADHESIVE PERFORMANCE
MECHANICAL PROPERTIES SYMBOL UNITS 28 DAYS AT 21 C 16 HOURS AT 50 C** 5 HOURS AT 70 C** TEST STANDARD
Cleavage on steel Fcleavage kN 7.9 11.2 11.9 BS 5350 Part C1
Lap shear on steel steel MPa 29 34 35 BS 5350 Part C5
CURED MECHANICAL AND THERMAL PROPERTIES
MECHANICAL PROPERTIES SYMBOL UNITS 28 DAYS AT 21 C 16 HOURS AT 50 C** 5 HOURS AT 70 C** TEST STANDARD
Glass Transition Temperature Tg1 C 51 66 72 ISO 6721 (DMA)
Cured Density ply g/cm
3
1.15 1.14 1.15 Archimedes
Volumetric Shrinkage % 3.42 3.06 3.15 Archimedes
Tensile Strength T MPa 31 47 44 ISO 527-2
Tensile Modulus ET GPa 2.90 2.63 2.89 ISO 527-2
Tensile Strain T % 3.46 4.77 6.15 ISO 527-2
3-point flexural strength F N/mm
2
63 84 83 ISO 178
3-point flexural modulus EF GPa 2.89 2.68 2.70 ISO 178
Charpy (notched) kJ/m
2
1.24 2.12 1.93 ISO 179-1
*working time properties are highly subjective to ambient conditions and should be used an approximate guideline for all Spabond 340 systems
**initial cure of 24 hours at 21 C
PDS-Spabond340LV(HT)-12-0219 6
NOTICE
All advice, instruction or recommendation is given in good faith but the selling Gurit entity (the
Company) only warrants that advice in writing is given with reasonable skill and care. No further duty
or responsibility is accepted by the Company. All advice is given subject to the terms and conditions
of sale (the Conditions) which are available on request from the Company or may be viewed at
Gurit s Website: www.gurit.com/terms-and-conditions.aspx
The Company strongly recommends that Customers make test panels in the final process conditions
and conduct appropriate testing of any goods or materials supplied by the Company prior to final
use to ensure that they are suitable for the Customer s planned application. Such testing should
include testing under conditions as close as possible to those to which the final component may be
subjected. The Company specifically excludes any warranty of fitness for purpose of the goods other
than as set out in writing by the Company. Due to the varied nature of end-use applications, the
Company does, in particular, not warrant that the test panels in the final process conditions and/or
the final component pass any fire standards.
The Company reserves the right to change specifications and prices without notice and Customers
should satisfy themselves that information relied on by the Customer is that which is currently
published by the Company on its website. Any queries may be addressed to the Technical Services
Department.
Gurit is continuously reviewing and updating literature. Please ensure that you have the current
version by contacting your sales contact and quoting the revision number in the bottom left-hand
corner of this page.
TECHNICAL CONTACT INFORMATION
For all other enquiries such as technical queries:
Telephone + 44 1983 828000 (08:30 17:00 GMT)
Email technical.support@gurit.com
24-HOUR CHEMICAL EMERGENCY NUMBER
For advice on chemical emergencies, spillages, fires or exposures:
Europe +44 1273 289451
Americas +1 646 844 7309
APAC +65 3158 1412
All trademarks used or mentioned in this document are protected by law.
E customer.support@gurit.com
W www.gurit.com
by | Sep 27, 2025
product DATA SHEET
SikaBiresin CR77 FR
February 19, Version 01 /2021
1
product DATA SHEET
SikaBiresin CR77 FR
February 19, Version 01 /2021
1
PRODUCT DATA SHEET
SikaBiresin CR77 FR with CH77-2 Fast and CH77-4 Slow Hardeners
(FORMERLY EL-319)
EPOXY LAMINATING SYSTEM
FLAME RETARDANT, MEETS FAR 25.853 FLAME TESTING
DESCRIPTION
SikaBiresin
CR77 FR is a UV stabilized **Halogen-Free Flame Retardant Epoxy
Laminating System developed for use in fabricating parts or repairs on structures
which require flame retardant, self-extinguishing properties with room-
temperature curing capabilities (or post cure options).
SikaBiresin
CR77 FR resin is available with two hardener choices: SikaBiresin
CH77-2 Fast, a moderate work-life hardener for fast turnaround laminating of
production parts and repairs, or SikaBiresin
CH77-4 Slow, a long work-life
hardener for laminating and vacuum bagging of large parts and repairs.
**SikaBiresin
CR77 FR Resin does not contain PBDE or OBDE or DBDE
Flame retardant additive
Suitable for vacuum bagging or RTM
Applications areas include – Aerospace, transportation, architectural and
others
PROPERTIES
Low viscosity for good wet-out
Non-Halogen flame retardancy
Self-extinguishing
Two hardener choices (fast/slow)
RoHS and REACH compliant
Epoxy (non-styrene)
Excellent bond to all fabrics
TYPICAL PHYSICAL PROPERTIES
Units
SikaBiresin
CR77 FR (A)
Resin
SikaBiresin
CH77-2 (B)
Fast Hardener
SikaBiresin
CH77-4 (B)
Slow Hardener
Composition Epoxy Amine Amine
Mix ratio by weight 100 12 19
Aspect Clear Liquid Clear Liquid Clear Liquid
Color Visual Light Amber Light Amber Light Amber
Viscosity Brookfield Cps. 9,720 40 30
Viscosity Brookfield (mixed) Cps.
1,865 1,105
product DATA SHEET
SikaBiresin CR77 FR
February 19, Version 01 /2021
2
Density at 77 F (25 C) (mixed) lbs./gal (g/cc) 9.78 (1.17)
8.10 (.97) 7.94 (.95)
Pot life (200g) at 77 F (25 C) minutes 50 139
MECHANICAL PROPERTIES
MECHANICAL AND THERMAL PROPERTIES (NEAT FORM)
Property Test Method Units(s)
SikaBiresin
CH77-2 (B)
Fast Hardener*
SikaBiresin
CH77-2 (B)
Fast Hardener**
SikaBiresin
CH77-4 (B)
Slow Hardener**
SikaBiresin
CH77-4 (B)
Slow Hardener**
Hardness ASTM D2240 Shore D 87 88 87 87
Flexural strength ASTM D790 psi (MPa) 13,040 (90) 14,593 (101) 11,535 (80) 17,006 (117)
Flexural modulus ASTM D790 psi (MPa) 473,215 (3,265) 560,077 (3,864) 372,726 (2,572) 527,632 (3,641)
Tensile strength ASTM D638 psi (MPa) 7,510 (52) 9,799 (68) 7,067 (49) 10,424 (72)
Tensile modulus ASTM D638 psi (MPa) 341,734 (2,358) 349,476 (2,411) 250,994 (1,732) 309,786 (2,136)
Elongation ASTM D638 % 2.6 3.3 4.0 4.4
Tg (TMA) ASTM E1545 F ( C) 113 (45) 170 (77) 98 (38) 115 (45)
*Cure schedule: *7 day at 77 F (25 C) **24-36 hr at 77 F (25 C) + 4 hr 212 F (100 C)
Flame Retardant Properties**
Test Description Test Method Test Results
(F1) 60 second Vertical Burn Test FAR/JAR 25.853 Pass
(F2) 12 second- Vertical Burn Test Req. FAR/JAR 25.853 Pass
(F5) 30 second-45 Angle Burn Test FAR/JAR 25.853 Pass
** FAR/JAR 25.853 Appendix F, Part (a)(1)(i), (ii), (v) (4 ply 7500 Style E-Glass Laminate),
Cure schedule: 7 days/77 F (25 C). Testing done at third party laboratory.
PROCESSING
Normal health and safety precautions should be observed when handling these
products:
Ensure good ventilation.
Wear gloves, glasses and protective clothes.
For further information, please consult the Safety Data Sheets.
product DATA SHEET
SikaBiresin CR77 FR
February 19, Version 01 /2021
3
STORAGE CONDITIONS
Product shelf life of resin and hardener(s) is 24 months when stored in original
unopened containers between 65 77 F (15 25 C). Any opened can must be
tightly closed.
PACKAGING
Packaging information on request, please contact your local sales representative. or
find your local contact on www.sikaindustry.com
LEGAL NOTICE
The information, and, in particular, the recommendations relating to the application
and end-use of Sika products, are given in good faith based on Sika s current
knowledge and experience of the products when properly stored, handled and applied
under normal conditions in accordance with Sika s recommendations. In practice, the
differences in materials, substrates and actual site conditions are such that no
warranty in respect of merchantability or of fitness for a particular purpose, nor any
liability arising out of any legal relationship whatsoever, can be inferred either from
this information, or from any written recommendations, or from any other advice
offered. The user of the product must test the product s suitability for the intended
application and purpose. Sika reserves the right to change the properties of its
products. The proprietary rights of third parties must be observed. All orders are
accepted subject to our current terms of sale and delivery. Users must always refer to
the most recent issue of the local Product Data Sheet for the product concerned,
copies of which will be supplied on request.
CONTACT
UNITED STATES
Sika Corporation
30800 Stephenson Highway
Madison Heights, Michigan 48071 USA
Tel.: (+1) 248 588-2270
Fax: (+1) 248 577-0810
Website: www.sikaindustry.com
by | Sep 27, 2025
by | Sep 27, 2025
Our Products are intended for sale to industrial and commercial customers. We request that Customers inspect and test our products before use
and satisfy themselves as to contents and suitability. Nothing herein shall constitute a warranty, expressed or implied, including any warranty or
merchantability or fitness, nor is protection from any law of patent to be inferred. All patent rights are reserved. The exclusive remedy for all
proven claims is replacement of our materials and in no event shall we be liable for special , incidental or consequential damages
Last updated June 12, 2018 ISO 9001:2015 Registered Company
1
80LS- 32 SYSTEM
EPOXY LAMINATING RESIN
80LS-32 is a100% solids epoxy laminating system. The system yields an increased cross link
density making it especially suitable for lightweight, high performance composites using a
variety of reinforcements.
USES
To make lightweight composites Hand lay up application
Coating Repair applications.
PERFORMANCE BENEFITS
Superior fatigue and toughness
properties
Good adhesion to fabrics, core
materials
Good moisture exclusion Excellent wet out and air release
Good clarity
CURING 80LS-32 SYSTEM
80LS-32 system mixes maintain good working properties until gelation takes place.
Allow the composite to cure for 3 hours at 130 F for best results.
TYPICAL LIQUID SYSTEM PROPERTIES AT 25 C/77 F FOR AO 80LS-32 SYSTEM
Property 80LS-32
Mix Ratio (parts by weight)
100 Resin/ Hardener 22
Density part A, lbs/gal 9.5
Density part B, lbs/gal 8.2
Density (mixed), lbs/gal 9.17
Viscosity (mixed) 900-1200 cps
Specific Gravity, (mixed) 1.098
Color, mixed Amber
Pot Life @ 77 F 33-38 minutes
Cure Time, Hrs at 130 F 3 Hrs
Our Products are intended for sale to industrial and commercial customers. We request that Customers inspect and test our products before use
and satisfy themselves as to contents and suitability. Nothing herein shall constitute a warranty, expressed or implied, including any warranty or
merchantability or fitness, nor is protection from any law of patent to be inferred. All patent rights are reserved. The exclusive remedy for all
proven claims is replacement of our materials and in no event shall we be liable for special , incidental or consequential damages
Last updated June 12, 2018 ISO 9001:2015 Registered Company
2
CURED SYSTEM PROPERTIES FOR 80LS-32 SYSTEM
Property 80LS-32
Hardness, Shore D, ASTM D-2240: 1 Day Cure
79
Glass Transition Temp >170 F
PACKAGING WEIGHTS IN LBS
Material Gallon Pail Drum
80LS-32A Resin (lbs) 7.3 36.4 364
80LS-32B
Hardener (lbs)
1.6 8.0 80 (2Pails)
