Technical Data Sheets | Revchem Composites

80LS-22A-D_TDS.pdf

by | Sep 27, 2025

Epoxy General Purpose Laminating Resin
Safety Data Sheet 80LS-22A
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
Issue date: 08/30/2019 Revision date: 05/15/2023

05/25/2023 EN (English US) SDS ID: 80LS-22A Page 1

SECTION 1: Identification

1.1. Identification
Product form : Mixture
Trade name : Epoxy General Purpose Laminating Resin
CAS-No. : Mixture
Product code : 80LS-22A
Formula : mixture
Other means of identification : Epoxy Part A

1.2. Recommended use and restrictions on use
Use of the substance/mixture : Epoxy Laminating Resin

1.3. Supplier
Dura Technologies, Inc.
2720 South Willow Avenue #A
Bloomington, CA 92316

909-546-1162
ChemTrec US: 800.424.9300
ChemTrec Int: +1 70 3527 3887

1.4. Emergency telephone number
Emergency number : ChemTrec US: 800.424.9300 Int: +1 70 3527 3887

SECTION 2: Hazard(s) identification

2.1. Classification of the substance or mixture
GHS US classification
Skin corrosion/irritation Category 2 H315 Causes skin irritation
Serious eye damage/eye irritation Category 2 H319 Causes serious eye irritation
Skin sensitization, Category 1 H317 May cause an allergic skin reaction

Full text of H statements : see section 16

2.2. GHS Label elements, including precautionary statements
GHS US labeling
Hazard pictograms (GHS US) :

Signal word (GHS US) : Warning
Hazard statements (GHS US) : H315 – Causes skin irritation
H317 – May cause an allergic skin reaction
H319 – Causes serious eye irritation
Precautionary statements (GHS US) : P261 – Avoid breathing dust/fume/gas/mist/vapors/spray.
P264 – Wash hands, forearms and face thoroughly after handling.
P272 – Contaminated work clothing must not be allowed out of the workplace.
P280 – Wear protective gloves/protective clothing/eye protection/face protection.
P302+P352 – If on skin: Wash with plenty of water.
P305+P351+P338 – IF IN EYES: Rinse cautiously with water for several minutes. Remove
contact lenses, if present and easy to do. Continue rinsing.
P321 – Specific treatment (see supplemental first aid instruction on this label).
P332+P313 – If skin irritation occurs: Get medical advice/attention.
P333+P313 – If skin irritation or rash occurs: Get medical advice/attention.
P337+P313 – If eye irritation persists: Get medical advice/attention.
P362+P364 – Take off contaminated clothing and wash it before reuse.
P363 – Wash contaminated clothing before reuse.
P501 – Dispose of contents/container to hazardous or special waste collection point, in
accordance with local, regional, national and/or international regulation.

Epoxy General Purpose Laminating Resin
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations

05/25/2023 EN (English US) SDS ID: 80LS-22A 2/8

2.3. Other hazards which do not result in classification
No additional information available
2.4. Unknown acute toxicity (GHS US)
Not applicable
SECTION 3: Composition/Information on ingredients

3.1. Substances
Not applicable
3.2. Mixtures

Name Product identifier % GHS US classification
Propane , 2,2 – bis[p(2,3-epoxypropoxy)phenyl]-, polymers

(CAS-No.) 25085-99-8 <= 91 Skin Irrit. 2, H315 Eye Irrit. 2B, H320 Skin Sens. 1B, H317 1,3-bis(2,3-epoxypropoxy)-2,2-dimethylpropane (CAS-No.) 17557-23-2 <= 10 Skin Irrit. 2, H315 Skin Sens. 1, H317 Aquatic Acute 3, H402 trimethylolpropane triacrylate,stabilized (CAS-No.) 15625-89-5 <= 8 Skin Irrit. 2, H315 Eye Irrit. 2, H319 Skin Sens. 1, H317 Full text of hazard classes and H-statements : see section 16 SECTION 4: First-aid measures 4.1. Description of first aid measures First-aid measures general : Never give anything by mouth to an unconscious person. If you feel unwell, seek medical advice (show the label where possible). First-aid measures after inhalation : Remove person to fresh air and keep comfortable for breathing. Remove victim to fresh air and keep at rest in a position comfortable for breathing. Call a POISON CENTER or doctor/physician if you feel unwell. Allow affected person to breathe fresh air. Allow the victim to rest. First-aid measures after skin contact : Wash with plenty of soap and water. Wash contaminated clothing before reuse. If skin irritation occurs: Get medical advice/attention. Specific treatment (see supplemental first aid instruction on this label). If skin irritation or rash occurs: Wash skin with plenty of water. First-aid measures after eye contact : Rinse cautiously with water for several minutes. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical advice/attention. First-aid measures after ingestion : Rinse mouth. Do NOT induce vomiting. Obtain emergency medical attention. Call a poison center/doctor/physician if you feel unwell. 4.2. Most important symptoms and effects (acute and delayed) Potential Adverse human health effects and symptoms : Based on available data, the classification criteria are not met. Symptoms/effects : Causes damage to organs through prolonged or repeated exposure. Symptoms/effects after inhalation : May cause an allergic skin reaction. May cause respiratory irritation. Symptoms/effects after skin contact : Causes skin irritation. Symptoms/effects after eye contact : Causes eye irritation. Causes serious eye irritation. 4.3. Immediate medical attention and special treatment, if necessary Until victim can be cared for by specialized staff: SECTION 5: Fire-fighting measures 5.1. Suitable (and unsuitable) extinguishing media Suitable extinguishing media : Sand. Water spray. Dry powder. Foam. Carbon dioxide. Unsuitable extinguishing media : Do not use a heavy water stream. 5.2. Specific hazards arising from the chemical Fire hazard : Heating increases the fire hazard. Heating may cause a fire. Heating may cause a fire or explosion. Insufficient data available on direct fire hazard (flashpoint > 100 C). Self-heating in
large quantities; may catch fire. Temperature above flashpoint: higher fire/explosion hazard.

5.3. Special protective equipment and precautions for fire-fighters
Firefighting instructions : Use water spray or fog for cooling exposed containers. Exercise caution when fighting any
chemical fire. Prevent fire-fighting water from entering environment.

Epoxy General Purpose Laminating Resin
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations

05/25/2023 EN (English US) SDS ID: 80LS-22A 3/8

Protection during firefighting : Do not enter fire area without proper protective equipment, including respiratory protection. Do
not attempt to take action without suitable protective equipment. Self-contained breathing
apparatus. Complete protective clothing.
SECTION 6: Accidental release measures

6.1. Personal precautions, protective equipment and emergency procedures
6.1.1. For non-emergency personnel
Emergency procedures : Ventilate spillage area. Evacuate unnecessary personnel.
6.1.2. For emergency responders
Protective equipment : Do not attempt to take action without suitable protective equipment. Equip cleanup crew with
proper protection. For further information refer to section 8: “Exposure controls/personal
protection”.
Emergency procedures : Ventilate area.

6.2. Environmental precautions
Avoid release to the environment. Prevent entry to sewers and public waters. Notify authorities if liquid enters sewers or public waters.

6.3. Methods and material for containment and cleaning up
For containment : Dam up the liquid spill.
Methods for cleaning up : Take up liquid spill into absorbent material. Soak up spills with inert solids, such as clay or
diatomaceous earth as soon as possible. Collect spillage. Store away from other materials.
Other information : Dispose of materials or solid residues at an authorized site.

6.4. Reference to other sections
See Heading 8. Exposure controls and personal protection. For further information refer to section 13.
SECTION 7: Handling and storage

7.1. Precautions for safe handling
Precautions for safe handling : Wear personal protective equipment. Wash hands and other exposed areas with mild soap and
water before eating, drinking or smoking and when leaving work. Provide good ventilation in
process area to prevent formation of vapor. Avoid breathing dust/fume/gas/mist/vapors/spray.
Use only outdoors or in a well-ventilated area. Do not breathe dust/fume/gas/mist/vapors/spray.
Hygiene measures : Wash hands and other exposed areas with mild soap and water before eat, drink or smoke and
when leaving work. Wash hands, forearms and face thoroughly after handling. Contaminated
work clothing should not be allowed out of the workplace. Wash contaminated clothing before
reuse. Do not eat, drink or smoke when using this product. Always wash hands after handling
the product.

7.2. Conditions for safe storage, including any incompatibilities
Storage conditions : Keep only in the original container in a cool, well ventilated place away from : Keep container
tightly closed. Keep container closed when not in use. Store in a well-ventilated place. Keep
cool.
Incompatible products : Strong bases. Strong acids.
Incompatible materials : Sources of ignition. Direct sunlight.
Storage temperature : 2 – 40 C

SECTION 8: Exposure controls/personal protection

8.1. Control parameters

trimethylolpropane triacrylate,stabilized (15625-89-5)
Not applicable

1,3-bis(2,3-epoxypropoxy)-2,2-dimethylpropane (17557-23-2)
Not applicable

Propane , 2,2 – bis[p(2,3-epoxypropoxy)phenyl]-, polymers (25085-99-8)
Not applicable

8.2. Appropriate engineering controls
Appropriate engineering controls : Ensure good ventilation of the work station.
Environmental exposure controls : Avoid release to the environment.

Epoxy General Purpose Laminating Resin
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations

05/25/2023 EN (English US) SDS ID: 80LS-22A 4/8

8.3. Individual protection measures/Personal protective equipment
Personal protective equipment:
Avoid all unnecessary exposure.

Materials for protective clothing:
GIVE GOOD RESISTANCE: rubber

Hand protection:
Wear protective gloves.

Eye protection:
Chemical goggles or safety glasses. Safety glasses

Skin and body protection:
Wear suitable protective clothing

Respiratory protection:
Wear appropriate mask

Other information:
Do not eat, drink or smoke during use.

SECTION 9: Physical and chemical properties

9.1. Information on basic physical and chemical properties
Physical state : Liquid

Appearance : Liquid.
Color : clear

Odor : slight characteristic

Odor threshold : No data available

pH : No data available

Melting point : N/A

Freezing point : No data available

Boiling point : > 392 F

Flash point : > 212 F

Relative evaporation rate (butyl acetate=1) : No data available

Relative evaporation rate (ether=1) : < 1 slower than ether Flammability (solid, gas) : Non flammable. Vapor pressure : < 2 mm Hg Relative vapor density at 20 C : No data available Relative density : 1.14 Density : 1.14 kg/l Solubility : Insoluble in water. Log Pow : No data available Auto-ignition temperature : No data available Decomposition temperature : No data available Viscosity, kinematic : No data available Viscosity, dynamic : No data available Explosion limits : No data available Explosive properties : No data available Oxidizing properties : No data available 9.2. Other information No additional information available Epoxy General Purpose Laminating Resin Safety Data Sheet according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations 05/25/2023 EN (English US) SDS ID: 80LS-22A 5/8 SECTION 10: Stability and reactivity 10.1. Reactivity The product is non-reactive under normal conditions of use, storage and transport. 10.2. Chemical stability Combustible liquid. Not established. 10.3. Possibility of hazardous reactions Not established. 10.4. Conditions to avoid Open flame. Direct sunlight. Extremely high or low temperatures. 10.5. Incompatible materials Strong acids. Strong bases. 10.6. Hazardous decomposition products fume. Carbon monoxide. Carbon dioxide. SECTION 11: Toxicological information 11.1. Information on toxicological effects Acute toxicity (oral) : Not classified (Lack of data) Acute toxicity (dermal) : Not classified Acute toxicity (inhalation) : Not classified 1,3-bis(2,3-epoxypropoxy)-2,2-dimethylpropane (17557-23-2) LD50 oral rat 4500 mg/kg (Rat, Literature study, Oral) LD50 dermal rat > 2100 mg/kg body weight (Rat, Literature study, Dermal)
ATE US (oral) 4500 mg/kg body weight

Skin corrosion/irritation : Causes skin irritation.
Serious eye damage/irritation : Causes serious eye irritation.
Respiratory or skin sensitization : May cause an allergic skin reaction.
Germ cell mutagenicity : Not classified
Carcinogenicity : Not classified

Reproductive toxicity : Not classified
STOT-single exposure : Not classified

STOT-repeated exposure : Not classified

Aspiration hazard : Not classified
Viscosity, kinematic : No data available

Likely routes of exposure : Inhalation.
Potential Adverse human health effects and
symptoms
: Based on available data, the classification criteria are not met.
Symptoms/effects : Causes damage to organs through prolonged or repeated exposure.
Symptoms/effects after inhalation : May cause an allergic skin reaction. May cause respiratory irritation.
Symptoms/effects after skin contact : Causes skin irritation.
Symptoms/effects after eye contact : Causes eye irritation. Causes serious eye irritation.

SECTION 12: Ecological information

12.1. Toxicity
Ecology – general : Dangerous for the environment. Harmful to aquatic life.
Ecology – water : Toxic to aquatic life with long lasting effects.

1,3-bis(2,3-epoxypropoxy)-2,2-dimethylpropane (17557-23-2)
LC50 fish 1 > 100 mg/l (96 h, Pisces, QSAR)
EC50 Daphnia 1 39 – 57 mg/l (OECD 202: Daphnia sp. Acute Immobilisation Test, 48 h, Daphnia magna, Static
system, Fresh water, Experimental value)

Epoxy General Purpose Laminating Resin
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations

05/25/2023 EN (English US) SDS ID: 80LS-22A 6/8

12.2. Persistence and degradability
Epoxy General Purpose Laminating Resin (Mixture)
Persistence and degradability May cause long-term adverse effects in the environment.

trimethylolpropane triacrylate,stabilized (15625-89-5)
Persistence and degradability Biodegradability in water: no data available.
ThOD
1.835 g O /g substance

1,3-bis(2,3-epoxypropoxy)-2,2-dimethylpropane (17557-23-2)
Persistence and degradability Readily biodegradable in water.

12.3. Bioaccumulative potential
Epoxy General Purpose Laminating Resin (Mixture)
Bioaccumulative potential Not established.

trimethylolpropane triacrylate,stabilized (15625-89-5)
Bioaccumulative potential No bioaccumulation data available.

1,3-bis(2,3-epoxypropoxy)-2,2-dimethylpropane (17557-23-2)
Log Pow 0.47 (QSAR, KOWWIN, 20 C)
Bioaccumulative potential Low potential for bioaccumulation (Log Kow < 4). 12.4. Mobility in soil 1,3-bis(2,3-epoxypropoxy)-2,2-dimethylpropane (17557-23-2) Log Koc 1.22 (log Koc, QSAR) Ecology - soil Highly mobile in soil. 12.5. Other adverse effects Other information : Avoid release to the environment. SECTION 13: Disposal considerations 13.1. Disposal methods Regional legislation (waste) : Disposal must be done according to official regulations. Waste treatment methods : Dispose of contents/container in accordance with licensed collector s sorting instructions. Sewage disposal recommendations : Do not discharge into drains. Product/Packaging disposal recommendations : Dispose in a safe manner in accordance with local/national regulations. Dispose of contents/container to hazardous or special waste collection point, in accordance with local, regional, national and/or international regulation. Ecology - waste materials : Avoid release to the environment. SECTION 14: Transport information Department of Transportation (DOT) In accordance with DOT Not regulated Transportation of Dangerous Goods Not regulated Transport by sea Transport document description (IMDG) : UN 3082 ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N. O.S. (Epoxy Resin ), 9, III, MARINE POLLUTANT UN-No. (IMDG) : 3082 Proper Shipping Name (IMDG) : ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O. S. Class (IMDG) : 9 - Miscellaneous dangerous substances and articles Packing group (IMDG) : III - substances presenting low danger Epoxy General Purpose Laminating Resin Safety Data Sheet according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations 05/25/2023 EN (English US) SDS ID: 80LS-22A 7/8 Limited quantities (IMDG) : 5 L Air transport Transport document description (IATA) : UN 3082 Environmentally hazardous substance, liquid, n.o.s. (Epoxy Resin ), 9, III UN-No. (IATA) : 3082 Proper Shipping Name (IATA) : Environmentally hazardous substance, liquid, n.o.s. Class (IATA) : 9 - Miscellaneous Dangerous Substances and Articles Packing group (IATA) : III - Minor Danger SECTION 15: Regulatory information 15.1. US Federal regulations trimethylolpropane triacrylate,stabilized (15625-89-5) Listed on the United States TSCA (Toxic Substances Control Act) inventory 1,3-bis(2,3-epoxypropoxy)-2,2-dimethylpropane (17557-23-2) Listed on the United States TSCA (Toxic Substances Control Act) inventory EPA TSCA Regulatory Flag T - T - indicates a substance that is the subject of a final TSCA section 4 test rule. 15.2. International regulations CANADA trimethylolpropane triacrylate,stabilized (15625-89-5) Listed on the Canadian DSL (Domestic Substances List) 1,3-bis(2,3-epoxypropoxy)-2,2-dimethylpropane (17557-23-2) Listed on the Canadian DSL (Domestic Substances List) EU-Regulations No additional information available National regulations No additional information available 15.3. US State regulations SECTION 16: Other information according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations Revision date : 05/15/2023 Data sources : REGULATION (EC) No 1272/2008 OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 16 December 2008 on classification, labeling and packaging of substances and mixtures, amending and repealing Directives 67/548/EEC and 1999/45/EC, and amending Regulation (EC) No 1907/2006. Other information : None. Full text of H-phrases: H315 Causes skin irritation H317 May cause an allergic skin reaction H319 Causes serious eye irritation H320 Causes eye irritation H402 Harmful to aquatic life Epoxy General Purpose Laminating Resin Safety Data Sheet according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations 05/25/2023 EN (English US) SDS ID: 80LS-22A 8/8 NFPA health hazard : 2 - Materials that, under emergency conditions, can cause temporary incapacitation or residual injury. NFPA fire hazard : 1 - Materials that must be preheated before ignition can occur. NFPA reactivity : 0 - Material that in themselves are normally stable, even under fire conditions. Hazard Rating Health : 2 Moderate Hazard - Temporary or minor injury may occur Flammability : 1 Slight Hazard - Materials that must be preheated before ignition will occur. Includes liquids, solids and semi solids having a flash point above 200 F. (Class IIIB) Physical : 0 Minimal Hazard - Materials that are normally stable, even under fire conditions, and will NOT react with water, polymerize, decompose, condense, or self-react. Non-Explosives. Personal protection : H H - Splash goggles, Gloves, Synthetic apron, Vapor respirator SDS US (GHS HazCom 2012) To the best of our knowledge this SDS is accurate. The the extent allowed by law, this statement is made in lieu of an other warranties, expressed or implied including but not limited to any implied warranty of merchantability or fitness for a particular purpose and is in lieu of any other obligations or liability on the part of Dura Technoligies, Inc.

80LS-20B-HG_TDS.pdf

by | Sep 27, 2025

Epoxy Clear Standard Hardener
Safety Data Sheet 80LS-20B
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
Revision date: 05/15/2023

05/15/2023 EN (English US) SDS ID: 80LS-20B Page 1

SECTION 1: Identification

1.1. Identification
Product form : Mixture
Trade name : Epoxy Clear Standard Hardener
CAS-No. : Mixture
Product code : 80LS-20B
Formula : N/A
Other means of identification : Hardner

1.2. Recommended use and restrictions on use
Use of the substance/mixture : Clear Laminating Hardener

1.3. Supplier
Dura Technologies, Inc.
2720 South Willow Avenue #A
Bloomington, CA 92316

909-546-1162
ChemTrec US: 800.424.9300
ChemTrec Int: +1 70 3527 3887

1.4. Emergency telephone number
Emergency number : ChemTrec US: 800.424.9300 Int: +1 70 3527 3887

SECTION 2: Hazard(s) identification

2.1. Classification of the substance or mixture
GHS US classification
Acute toxicity (oral) Category 4 H302 Harmful if swallowed
Acute toxicity (inhalation:dust,mist) Category 4 H332 Harmful if inhaled
Skin corrosion/irritation Category 1 H314 Causes severe skin burns and eye damage
Serious eye damage/eye irritation Category 1 H318 Causes serious eye damage
Skin sensitization, Category 1 H317 May cause an allergic skin reaction
Hazardous to the aquatic environment – Acute Hazard Category 3 H402 Harmful to aquatic life
Hazardous to the aquatic environment – Chronic Hazard Category 2 H411 Toxic to aquatic life with long lasting effects

Full text of H statements : see section 16

2.2. GHS Label elements, including precautionary statements
GHS US labeling
Hazard pictograms (GHS US) :

Signal word (GHS US) : Danger
Hazard statements (GHS US) : H302+H332 – Harmful if swallowed or if inhaled
H314 – Causes severe skin burns and eye damage
H317 – May cause an allergic skin reaction
H318 – Causes serious eye damage
H402 – Harmful to aquatic life
H411 – Toxic to aquatic life with long lasting effects
Precautionary statements (GHS US) : P260 – Do not breathe dust/fume/gas/mist/vapors/spray.
P261 – Avoid breathing dust/fume/gas/mist/vapors/spray.
P264 – Wash hands, forearms and face thoroughly after handling.
P270 – Do not eat, drink or smoke when using this product.
P271 – Use only outdoors or in a well-ventilated area.
P272 – Contaminated work clothing must not be allowed out of the workplace.
P273 – Avoid release to the environment.
P280 – Wear protective gloves/protective clothing/eye protection/face protection.
P301+P312 – If swallowed: Call a poison center or doctor if you feel unwell.

Epoxy Clear Standard Hardener
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations

05/15/2023 EN (English US) SDS ID: 80LS-20B 2/11

P301+P330+P331 – If swallowed: rinse mouth. Do NOT induce vomiting.
P302+P352 – If on skin: Wash with plenty of water.
P303+P361+P353 – If on skin (or hair): Take off immediately all contaminated clothing. Rinse
skin with water/shower.
P304+P340 – If inhaled: Remove person to fresh air and keep comfortable for breathing.
P305+P351+P338 – IF IN EYES: Rinse cautiously with water for several minutes. Remove
contact lenses, if present and easy to do. Continue rinsing.
P310 – Immediately call a poison center or doctor.
P312 – Call a poison center or doctor if you feel unwell.
P321 – Specific treatment (see supplemental first aid instruction on this label).
P330 – Rinse mouth.
P333+P313 – If skin irritation or rash occurs: Get medical advice/attention.
P363 – Wash contaminated clothing before reuse.
P391 – Collect spillage.
P405 – Store locked up.
P501 – Dispose of contents/container to hazardous or special waste collection point, in
accordance with local, regional, national and/or international regulation.

2.3. Other hazards which do not result in classification
No additional information available
2.4. Unknown acute toxicity (GHS US)
Not applicable
SECTION 3: Composition/Information on ingredients

3.1. Substances
Not applicable
3.2. Mixtures

Name Product identifier % GHS US classification
benzyl alcohol

(CAS-No.) 100-51-6 <= 34 Acute Tox. 4 (Oral), H302 Acute Tox. 4 (Inhalation), H332 isophorone diamine (CAS-No.) 2855-13-2 <= 21 Acute Tox. 4 (Oral), H302 Skin Corr. 1, H314 Skin Sens. 1, H317 Aquatic Acute 3, H402 Aquatic Chronic 3, H412 m-phenylenebis(methylamine) (CAS-No.) 1477-55-0 <= 19 Acute Tox. 4 (Oral), H302 Acute Tox. 4 (Dermal), H312 Acute Tox. 3 (Inhalation), H331 Skin Corr. 1, H314 Skin Sens. 1, H317 Aquatic Acute 3, H402 Aquatic Chronic 3, H412 1,3-bis(aminomethyl)cyclohexane (CAS-No.) 2579-20-6 <= 18 Acute Tox. 4 (Oral), H302 Skin Corr. 1A, H314 Aquatic Acute 3, H402 Aquatic Chronic 3, H412 4-tert-butylphenol (CAS-No.) 98-54-4 <= 13 Skin Irrit. 2, H315 Eye Dam. 1, H318 Aquatic Acute 2, H401 Aquatic Chronic 1, H410 Full text of hazard classes and H-statements : see section 16 SECTION 4: First-aid measures 4.1. Description of first aid measures First-aid measures general : Never give anything by mouth to an unconscious person. IF exposed or concerned: Get medical advice/attention. First-aid measures after inhalation : Remove person to fresh air and keep comfortable for breathing. Remove victim to fresh air and keep at rest in a position comfortable for breathing. Call a POISON CENTER or doctor/physician if you feel unwell. Immediately call a poison center or doctor/physician. First-aid measures after skin contact : Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower. Immediately call a poison center or doctor/physician. First-aid measures after eye contact : Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Immediately call a poison center or doctor/physician. First-aid measures after ingestion : Rinse mouth. Do NOT induce vomiting. Call a POISON CENTER or doctor/physician if you feel unwell. Immediately call a poison center or doctor/physician. Call a poison center/doctor/physician if you feel unwell. Epoxy Clear Standard Hardener Safety Data Sheet according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations 05/15/2023 EN (English US) SDS ID: 80LS-20B 3/11 4.2. Most important symptoms and effects (acute and delayed) Potential Adverse human health effects and symptoms : Based on available data, the classification criteria are not met. Harmful if swallowed. Harmful if inhaled. Symptoms/effects : Causes severe skin burns and eye damage. Suspected of damaging fertility or the unborn child. Symptoms/effects after inhalation : Danger of serious damage to health by prolonged exposure through inhalation. Harmful if inhaled. Symptoms/effects after skin contact : Causes skin irritation. Caustic burns/corrosion of the skin. Symptoms/effects after eye contact : Causes eye irritation. May cause severe irritation. Causes serious eye damage. Symptoms/effects after ingestion : Swallowing a small quantity of this material will result in serious health hazard. 4.3. Immediate medical attention and special treatment, if necessary Until victim can be cared for by specialized staff: SECTION 5: Fire-fighting measures 5.1. Suitable (and unsuitable) extinguishing media Suitable extinguishing media : Sand. Water spray. Dry powder. Foam. Carbon dioxide. Unsuitable extinguishing media : Do not use a heavy water stream. 5.2. Specific hazards arising from the chemical Fire hazard : Heating increases the fire hazard. Heating may cause a fire. Heating may cause a fire or explosion. Insufficient data available on direct fire hazard (flashpoint > 100 C). Self-heating in
large quantities; may catch fire. Temperature above flashpoint: higher fire/explosion hazard.

5.3. Special protective equipment and precautions for fire-fighters
Firefighting instructions : Use water spray or fog for cooling exposed containers. Exercise caution when fighting any
chemical fire. Prevent fire-fighting water from entering environment.
Protection during firefighting : Do not enter fire area without proper protective equipment, including respiratory protection. Do
not attempt to take action without suitable protective equipment. Self-contained breathing
apparatus. Complete protective clothing.
SECTION 6: Accidental release measures

6.1. Personal precautions, protective equipment and emergency procedures
6.1.1. For non-emergency personnel
Emergency procedures : Ventilate spillage area. Evacuate unnecessary personnel.
6.1.2. For emergency responders
Protective equipment : Do not attempt to take action without suitable protective equipment. Equip cleanup crew with
proper protection. For further information refer to section 8: “Exposure controls/personal
protection”.
Emergency procedures : Ventilate area.

6.2. Environmental precautions
Avoid release to the environment. Prevent entry to sewers and public waters. Notify authorities if liquid enters sewers or public waters.

6.3. Methods and material for containment and cleaning up
Methods for cleaning up : Take up liquid spill into absorbent material. Soak up spills with inert solids, such as clay or
diatomaceous earth as soon as possible. Collect spillage. Store away from other materials.
Other information : Dispose of materials or solid residues at an authorized site.

6.4. Reference to other sections
See Heading 8. Exposure controls and personal protection. For further information refer to section 13.
SECTION 7: Handling and storage

7.1. Precautions for safe handling
Precautions for safe handling : Wear personal protective equipment. Wash hands and other exposed areas with mild soap and
water before eating, drinking or smoking and when leaving work. Provide good ventilation in
process area to prevent formation of vapor. Use only outdoors or in a well-ventilated area.
Avoid breathing dust/fume/gas/mist/vapors/spray. Do not breathe
dust/fume/gas/mist/vapors/spray. Obtain special instructions before use. Do not handle until all
safety precautions have been read and understood.
Hygiene measures : Wash hands, forearms and face thoroughly after handling. Wash contaminated clothing before
reuse. Do not eat, drink or smoke when using this product. Always wash hands after handling
the product.

Epoxy Clear Standard Hardener
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations

05/15/2023 EN (English US) SDS ID: 80LS-20B 4/11

7.2. Conditions for safe storage, including any incompatibilities
Technical measures : Comply with applicable regulations.
Storage conditions : Keep only in the original container in a cool, well ventilated place away from : Keep container
closed when not in use. Store in a well-ventilated place. Keep cool.
Incompatible products : Strong bases. Strong acids.
Incompatible materials : Sources of ignition. Direct sunlight.

SECTION 8: Exposure controls/personal protection

8.1. Control parameters

1,3-bis(aminomethyl)cyclohexane (2579-20-6)
Not applicable

4-tert-butylphenol (98-54-4)
Not applicable

isophorone diamine (2855-13-2)
Not applicable

benzyl alcohol (100-51-6)
Not applicable

m-phenylenebis(methylamine) (1477-55-0)
ACGIH ACGIH Ceiling (mg/m ) 0.1 mg/m (m-Xylene alfa,alfa’-diamine; USA;
Momentary value; TLV – Adopted Value)

8.2. Appropriate engineering controls
Appropriate engineering controls : Ensure good ventilation of the work station.
Environmental exposure controls : Avoid release to the environment.

8.3. Individual protection measures/Personal protective equipment
Personal protective equipment:
Avoid all unnecessary exposure.

Hand protection:
Wear protective gloves.

Eye protection:
Chemical goggles or face shield. Safety glasses

Skin and body protection:
Wear suitable protective clothing

Respiratory protection:
Wear appropriate mask

Other information:
Do not eat, drink or smoke during use.

SECTION 9: Physical and chemical properties

9.1. Information on basic physical and chemical properties
Physical state : Liquid

Appearance : Clear, colorless liquid.
Color : clear

Odor : characteristic

Odor threshold : No data available

pH : No data available

Melting point : Not applicable

Freezing point : No data available

Epoxy Clear Standard Hardener
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations

05/15/2023 EN (English US) SDS ID: 80LS-20B 5/11

Boiling point : >= 392 F

Flash point : >= 230 F

Relative evaporation rate (butyl acetate=1) : No data available

Relative evaporation rate (ether=1) : < 1 slower than ether Flammability (solid, gas) : Non flammable. Vapor pressure : <= 2 mm Hg Relative vapor density at 20 C : No data available Relative density : No data available Relative density of saturated gas/air mixture : 1.02 Density : 1.02 kg/l Solubility : No data available Log Pow : No data available Auto-ignition temperature : No data available Decomposition temperature : No data available Viscosity, kinematic : No data available Viscosity, dynamic : No data available Explosion limits : No data available Explosive properties : No data available Oxidizing properties : No data available 9.2. Other information No additional information available SECTION 10: Stability and reactivity 10.1. Reactivity Thermal decomposition generates : Corrosive vapors. 10.2. Chemical stability Stable under normal conditions. Not established. 10.3. Possibility of hazardous reactions Not established. 10.4. Conditions to avoid Direct sunlight. Extremely high or low temperatures. 10.5. Incompatible materials Strong acids. Strong bases. 10.6. Hazardous decomposition products fume. Carbon monoxide. Carbon dioxide. Thermal decomposition generates : Corrosive vapors. SECTION 11: Toxicological information 11.1. Information on toxicological effects Acute toxicity (oral) : Harmful if swallowed. Acute toxicity (dermal) : Not classified Acute toxicity (inhalation) : Harmful if inhaled. ATE US (oral) 1147.717 mg/kg body weight ATE US (dust, mist) 3.03 mg/l/4h 1,3-bis(aminomethyl)cyclohexane (2579-20-6) LD50 oral rat 880 mg/kg (Rat, Oral) ATE US (oral) 880 mg/kg body weight 4-tert-butylphenol (98-54-4) LD50 oral rat > 2000 mg/kg (Rat; OECD 401: Acute Oral Toxicity; Experimental value)
LC50 Inhalation – Rat > 5.6 mg/l/4h (Rat; Experimental value)

isophorone diamine (2855-13-2)
LD50 oral rat 1030 mg/kg (Equivalent or similar to OECD 401, Rat, Male, Experimental value, Oral, 14
day(s))

Epoxy Clear Standard Hardener
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations

05/15/2023 EN (English US) SDS ID: 80LS-20B 6/11

isophorone diamine (2855-13-2)
LD50 dermal rat > 2000 mg/kg body weight (OECD 402: Acute Dermal Toxicity, 24 h, Rat, Male / female,
Experimental value, Dermal, 14 day(s))
LC50 Inhalation – Rat > 5.01 mg/l (OECD 403: Acute Inhalation Toxicity, 4 h, Rat, Male / female, Experimental value,
Inhalation (aerosol), 14 day(s))
ATE US (oral) 1030 mg/kg body weight

benzyl alcohol (100-51-6)
LD50 oral rat 1620 mg/kg bw/day (Rat, Male, Experimental value, Oral)
LD50 dermal rabbit > 2000 mg/kg (Rabbit, Inconclusive, insufficient data, Dermal)
LC50 Inhalation – Rat > 4.178 mg/l air (OECD 403: Acute Inhalation Toxicity, 4 h, Rat, Male / female, Experimental
value, Inhalation (aerosol))
ATE US (oral) 1620 mg/kg body weight
ATE US (gases) 4500 ppmV/4h
ATE US (vapors) 11 mg/l/4h
ATE US (dust, mist) 1.5 mg/l/4h

m-phenylenebis(methylamine) (1477-55-0)
LD50 oral rat 930 mg/kg (Rat)
LD50 dermal rabbit 2000 mg/kg (Rabbit)
LC50 Inhalation – Rat 2.4 mg/l/4h (Rat)
ATE US (oral) 930 mg/kg body weight
ATE US (dermal) 2000 mg/kg body weight
ATE US (gases) 700 ppmV/4h
ATE US (vapors) 2.4 mg/l/4h
ATE US (dust, mist) 2.4 mg/l/4h

Skin corrosion/irritation : Causes severe skin burns and eye damage.
Serious eye damage/irritation : Causes serious eye damage.
Respiratory or skin sensitization : May cause an allergic skin reaction.
Germ cell mutagenicity : Not classified
Carcinogenicity : Not classified

Reproductive toxicity : Not classified
STOT-single exposure : Not classified

STOT-repeated exposure : Not classified

Aspiration hazard : Not classified
Viscosity, kinematic : No data available

Likely routes of exposure : Inhalation.
Potential Adverse human health effects and
symptoms
: Based on available data, the classification criteria are not met. Harmful if swallowed. Harmful if
inhaled.
Symptoms/effects : Causes severe skin burns and eye damage. Suspected of damaging fertility or the unborn
child.
Symptoms/effects after inhalation : Danger of serious damage to health by prolonged exposure through inhalation. Harmful if
inhaled.
Symptoms/effects after skin contact : Causes skin irritation. Caustic burns/corrosion of the skin.
Symptoms/effects after eye contact : Causes eye irritation. May cause severe irritation. Causes serious eye damage.
Symptoms/effects after ingestion : Swallowing a small quantity of this material will result in serious health hazard.

SECTION 12: Ecological information

12.1. Toxicity
Ecology – general : Dangerous for the environment. Harmful to aquatic life.
Ecology – water : Toxic to aquatic life with long lasting effects.

Epoxy Clear Standard Hardener
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations

05/15/2023 EN (English US) SDS ID: 80LS-20B 7/11

1,3-bis(aminomethyl)cyclohexane (2579-20-6)
LC50 fish 1 130 mg/l (OECD 203: Fish, Acute Toxicity Test, 96 h, Leuciscus idus, Semi-static system,
Fresh water, Experimental value, GLP)
EC50 Daphnia 1 65.4 mg/l (OECD 202: Daphnia sp. Acute Immobilisation Test, 48 h, Daphnia magna, Static
system, Fresh water, Experimental value, GLP)

4-tert-butylphenol (98-54-4)
EC50 Daphnia 1 3.9 mg/l (EC50; 48 h)
LC50 fish 2 5.14 mg/l (LC50; 96 h)
Threshold limit algae 2 11.2 mg/l (EC50; 72 h)

isophorone diamine (2855-13-2)
LC50 fish 1 110 mg/l (EU Method C.1, 96 h, Leuciscus idus, Semi-static system, Fresh water,
Experimental value, GLP)
EC50 Daphnia 1 23 mg/l (OECD 202: Daphnia sp. Acute Immobilisation Test, 48 h, Daphnia magna, Static
system, Fresh water, Experimental value, GLP)

benzyl alcohol (100-51-6)
LC50 fish 1 460 mg/l (EPA OPP 72-1, 96 h, Pimephales promelas, Static system, Fresh water,
Experimental value, Nominal concentration)
EC50 Daphnia 1 230 mg/l (OECD 202: Daphnia sp. Acute Immobilisation Test, 48 h, Daphnia magna, Fresh
water, Experimental value, GLP)
ErC50 (algae) 770 mg/l (OECD 201: Alga, Growth Inhibition Test, 72 h, Pseudokirchneriella subcapitata,
Static system, Fresh water, Experimental value, GLP)

m-phenylenebis(methylamine) (1477-55-0)
EC50 Daphnia 1 16 mg/l (EC50; 48 h)
LC50 fish 2 > 100 mg/l (LC50; 96 h)
Threshold limit algae 1 12 mg/l (EC50; 72 h)

12.2. Persistence and degradability
Epoxy Clear Standard Hardener (Mixture)
Persistence and degradability May cause long-term adverse effects in the environment.

1,3-bis(aminomethyl)cyclohexane (2579-20-6)
Persistence and degradability Not readily biodegradable in water. Biodegradability in soil: no data available. Not established.

4-tert-butylphenol (98-54-4)
Persistence and degradability Readily biodegradable in water. Low potential for mobility in soil. Photolysis in the air.
ThOD
2.77 g O /g substance

isophorone diamine (2855-13-2)
Persistence and degradability Not readily biodegradable in water.

benzyl alcohol (100-51-6)
Persistence and degradability Biodegradable in the soil. Readily biodegradable in water.
Biochemical oxygen demand (BOD)
1.6 g O /g substance
Chemical oxygen demand (COD)
2.4 g O /g substance
ThOD
2.5 g O /g substance

m-phenylenebis(methylamine) (1477-55-0)
Persistence and degradability Not readily biodegradable in water.

12.3. Bioaccumulative potential
Epoxy Clear Standard Hardener (Mixture)
Bioaccumulative potential Not established.

1,3-bis(aminomethyl)cyclohexane (2579-20-6)
Log Pow 0.69 – 0.78 (Experimental value, OECD 107: Partition Coefficient (n-octanol/water): Shake
Flask Method, 21.5 – 24.7 C)
Bioaccumulative potential Low potential for bioaccumulation (Log Kow < 4). Not established. 4-tert-butylphenol (98-54-4) BCF fish 1 120 (BCF; 3 h) BCF fish 2 20 - 88 (BCF) Epoxy Clear Standard Hardener Safety Data Sheet according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations 05/15/2023 EN (English US) SDS ID: 80LS-20B 8/11 4-tert-butylphenol (98-54-4) BCF other aquatic organisms 1 34 (BCF; 24 h; Chlorella sp.) BCF other aquatic organisms 2 240 (BCF; 5 h; Bacteria) Log Pow 3 (Experimental value; OECD 117: Partition Coefficient (n-octanol/water), HPLC method; 23 C) Bioaccumulative potential Low potential for bioaccumulation (BCF < 500). isophorone diamine (2855-13-2) BCF other aquatic organisms 1 3.16 (BCFWIN, QSAR) Log Pow 0.99 (Experimental value, OECD 107: Partition Coefficient (n-octanol/water): Shake Flask Method, 23 C) Bioaccumulative potential Low potential for bioaccumulation (Log Kow < 4). benzyl alcohol (100-51-6) Log Pow 1 - 1.1 (Experimental value, 20 C) Bioaccumulative potential Low potential for bioaccumulation (Log Kow < 4). m-phenylenebis(methylamine) (1477-55-0) BCF fish 1 < 2.7 (BCF) Log Pow 0.15 Bioaccumulative potential Low potential for bioaccumulation (Log Kow < 4). 12.4. Mobility in soil 1,3-bis(aminomethyl)cyclohexane (2579-20-6) Log Koc 1.473 (log Koc, Calculated value) 4-tert-butylphenol (98-54-4) Log Koc log Koc,3.1; QSAR isophorone diamine (2855-13-2) Surface tension 3.47 N/m (23 C) Log Koc 2.97 (log Koc, QSAR) Ecology - soil Low potential for adsorption in soil. benzyl alcohol (100-51-6) Surface tension 39 mN/m (20 C) Ecology - soil No (test)data on mobility of the substance available. 12.5. Other adverse effects Other information : Avoid release to the environment. SECTION 13: Disposal considerations 13.1. Disposal methods Regional legislation (waste) : Disposal must be done according to official regulations. Waste treatment methods : Dispose of contents/container in accordance with licensed collector s sorting instructions. Sewage disposal recommendations : Do not discharge into drains. Product/Packaging disposal recommendations : Dispose in a safe manner in accordance with local/national regulations. Dispose of contents/container to hazardous or special waste collection point, in accordance with local, regional, national and/or international regulation. Ecology - waste materials : Avoid release to the environment. SECTION 14: Transport information Department of Transportation (DOT) In accordance with DOT Transport document description : UN2735 Polyamines, liquid, corrosive, n.o.s. (isophorone diamine ; 1,3- bis(aminomethyl)cyclohexane), 8, I UN-No.(DOT) : UN2735 Proper Shipping Name (DOT) : Polyamines, liquid, corrosive, n.o.s. Epoxy Clear Standard Hardener Safety Data Sheet according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations 05/15/2023 EN (English US) SDS ID: 80LS-20B 9/11 Class (DOT) : 8 - Class 8 - Corrosive material 49 CFR 173.136 Packing group (DOT) : I - Great Danger Hazard labels (DOT) : 8 - Corrosive Dangerous for the environment : Yes Marine pollutant : Yes DOT Packaging Non Bulk (49 CFR 173.xxx) : 201 DOT Packaging Bulk (49 CFR 173.xxx) : 243 DOT Symbols : G - Identifies PSN requiring a technical name DOT Special Provisions (49 CFR 172.102) : A3 - For combination packaging, if glass inner packaging (including ampoules) are used, they must be packed with absorbent material in tightly closed metal receptacles before packing in outer packaging. A6 - For combination packaging, if plastic inner packaging are used, they must be packed in tightly closed metal receptacles before packing in outer packaging. B10 - MC 300, MC 301, MC 302, MC 303, MC 305, and MC 306 and DOT 406 cargo tanks, and DOT 57 portable tanks are not authorized. N34 - Aluminum construction materials are not authorized for any part of a packaging which is normally in contact with the hazardous material. T14 - 6 6 mm Prohibited 178.275(g)(3). TP2 - a. The maximum degree of filling must not exceed the degree of filling determined by the following: (image) Where: tr is the maximum mean bulk temperature during transport, tf is the temperature in degrees celsius of the liquid during filling, and a is the mean coefficient of cubical expansion of the liquid between the mean temperature of the liquid during filling (tf) and the maximum mean bulk temperature during transportation (tr) both in degrees celsius. b. For liquids transported under ambient conditions may be calculated using the formula: (image) Where: d15 and d50 are the densities (in units of mass per unit volume) of the liquid at 15 C (59 F) and 50 C (122 F), respectively. TP27 - A portable tank having a minimum test pressure of 4 bar (400 kPa) may be used provided the calculated test pressure is 4 bar or less based on the MAWP of the hazardous material, as defined in 178.275 of this subchapter, where the test pressure is 1.5 times the MAWP. DOT Packaging Exceptions (49 CFR 173.xxx) : None DOT Quantity Limitations Passenger aircraft/rail (49 CFR 173.27) : 0.5 L DOT Quantity Limitations Cargo aircraft only (49 CFR 175.75) : 2.5 L DOT Vessel Stowage Location : A - The material may be stowed on deck or under deck on a cargo vessel and on a passenger vessel. DOT Vessel Stowage Other : 52 - Stow separated from acids Emergency Response Guide (ERG) Number : 153 Other information : No supplementary information available. Transportation of Dangerous Goods Not applicable Transport by sea Transport document description (IMDG) : UN 2735 POLYAMINES, LIQUID, CORROSIVE, N.O .S. (isophorone diamine ; 1,3- bis(aminomethyl)cyclohexane), 8, I UN-No. (IMDG) : 2735 Proper Shipping Name (IMDG) : POLYAMINES, LIQUID, CORROSIVE, N.O.S . Class (IMDG) : 8 - Corrosive substances Packing group (IMDG) : I - substances presenting high danger Epoxy Clear Standard Hardener Safety Data Sheet according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations 05/15/2023 EN (English US) SDS ID: 80LS-20B 10/11 Marine pollutant : Yes Air transport Transport document description (IATA) : UN 2735 Polyamines, liquid, corrosive, n.o.s. (isophorone diamine ; 1,3- bis(aminomethyl)cyclohexane), 8, I UN-No. (IATA) : 2735 Proper Shipping Name (IATA) : Polyamines, liquid, corrosive, n.o.s. Class (IATA) : 8 - Corrosives Packing group (IATA) : I - Great Danger SECTION 15: Regulatory information 15.1. US Federal regulations Epoxy Clear Standard Hardener (Mixture) SARA Section 311/312 Hazard Classes Delayed (chronic) health hazard 1,3-bis(aminomethyl)cyclohexane (2579-20-6) Listed on the United States TSCA (Toxic Substances Control Act) inventory 4-tert-butylphenol (98-54-4) Listed on the United States TSCA (Toxic Substances Control Act) inventory isophorone diamine (2855-13-2) Listed on the United States TSCA (Toxic Substances Control Act) inventory benzyl alcohol (100-51-6) Listed on the United States TSCA (Toxic Substances Control Act) inventory m-phenylenebis(methylamine) (1477-55-0) Listed on the United States TSCA (Toxic Substances Control Act) inventory 15.2. International regulations CANADA 1,3-bis(aminomethyl)cyclohexane (2579-20-6) Listed on the Canadian DSL (Domestic Substances List) 4-tert-butylphenol (98-54-4) Listed on the Canadian DSL (Domestic Substances List) isophorone diamine (2855-13-2) Listed on the Canadian DSL (Domestic Substances List) benzyl alcohol (100-51-6) Listed on the Canadian DSL (Domestic Substances List) m-phenylenebis(methylamine) (1477-55-0) Listed on the Canadian DSL (Domestic Substances List) EU-Regulations No additional information available National regulations No additional information available 15.3. US State regulations Epoxy Clear Standard Hardener Safety Data Sheet according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations 05/15/2023 EN (English US) SDS ID: 80LS-20B 11/11 Component State or local regulations isophorone diamine(2855-13-2) U.S. - New Jersey - Right to Know Hazardous Substance List m-phenylenebis(methylamine)(1477-55-0) U.S. - New Jersey - Right to Know Hazardous Substance List SECTION 16: Other information according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations Revision date : 05/15/2023 Other information : None. Full text of H-phrases: H302 Harmful if swallowed H312 Harmful in contact with skin H314 Causes severe skin burns and eye damage H315 Causes skin irritation H317 May cause an allergic skin reaction H318 Causes serious eye damage H331 Toxic if inhaled H332 Harmful if inhaled H401 Toxic to aquatic life H402 Harmful to aquatic life H410 Very toxic to aquatic life with long lasting effects H411 Toxic to aquatic life with long lasting effects H412 Harmful to aquatic life with long lasting effects SDS US (GHS HazCom 2012) To the best of our knowledge this SDS is accurate. The the extent allowed by law, this statement is made in lieu of an other warranties, expressed or implied including but not limited to any implied warranty of merchantability or fitness for a particular purpose and is in lieu of any other obligations or liability on the part of Dura Technoligies, Inc.

80LS-20B-G_TDS.pdf