Technical Data Sheets | Revchem Composites

80606126_TDS.pdf

by | Sep 27, 2025

TECHNICAL DATA SHEET
SikaBiresin AP014
February 19, Version 02 /2019

1
TECHNICAL DATA SHEET
SikaBiresin AP014
February 19, Version 02 /2019

1
TECHNICAL DATA SHEET
SikaBiresin AP014
(FORMERLY P-14)
POLYESTER FILLER S YSTEM
MACHINABLE / RIGID

DESCRIPTION
The most versatile of all set-fast filler pastes, AP014 ULTRA FILLER is a two component filler system which
yields a smooth, creamy, thixotropic and workable paste with superior handling, set-fast characteristics
and dimensional stability. Once applied it forms a rigid, strong surface which can be machined, sanded,
filed or scraped to a feather edge. A P014 adheres and bonds to fiberglass, SMC, RIM, BMC, Graphite,
Kevlar

and other types of composites as well as aluminum, steel, grey iron, copper, plaster, models,
patterns and other substrates. AP014 offers the industry manufacturer a wide variety of applications for
bonding, filling, sealing and finishing with optimum physical properties. AP014 ULTRA FILLER can be
applied without pin-holing and exhibits no shrink or sink after curing. It accepts virtually all types of
finishes e.g., lacquer, enamel, polyurethane, epoxy, etc., without any special surface preparation. It is a
“no bleed out” system after finishing or if covered with a decorative film. Its high quality, coupled with
the set-fast feature offers industry substantial savings in time and labor plus top quality in the finished
product. AP014 can be used in areas of final fabrication, production, tooling, model & pattern making,
repair operations and in many other applications. Typical applications include: filling composites surface
porosity, honeycomb panel edge filler, bonding loose pieces and details, vacuum mold repair and
modifications, urethane mold repairs and modifications, FRP composite repairs, pattern repairs and
fillets, core box repairs and modifications, void and porosity filling, router fixture repairs, crack, dent and
crevice repair, temporary holding fixtures, filling cloth impressions in pre-preg, non-conductive barrier
potting, RIM/SMC/BMC surface filler, bonding inserts/hangers, urethane part repair, potting stripped
threads, renewing worn surfaces and many others.

PROPERTIES
Very quick setting
Comes in white and gray colors
Dimensionally stable

Excellent finishing and machinability
Easy to use
Good adhesion

TECHNICAL DATA SHEET
SikaBiresin AP014
February 19, Version 02 /2019

2
PHYSICAL PROPERTIES
Composition POLYESTER
SikaBiresin AP 014
BPO HARDENER
BPO
MIXED
Mix ratio by weight
Mix ratio by volume at 25 C
100 2
Aspect Paste Cream Paste Paste
Color NOTE – Mixed color can be
varied with Cream BPO color
(As a mixing aid/indicator and
final color choice)
White
Gray

White
Red
Black

Viscosity at 25 C (cPs) BROOKFIELD LVT Paste
Specific gravity at 25 C lbs./gal
(g/cc)
ASTM D792 13.4
(1.61)
10.0
(1.20)
13.30
(1.60)
Pot Life at 25 C (102 g) (minutes) ASTM D2471 4.0 6.0

MECHANICAL PROPERTIES at 23 C
(1)

Hardness (Shore D) ASTM D-2240 86
Water absorption 24 hr/R.T. soak (%) ASTM D-570 0.16
Adhesive pull strength (psi)
Aluminum
Polyester filler
Mahogany
Epoxy glass laminate
ASTM D-4541

2,940
1,717
1,459
753
(1)

Average values obtained on standard specimens / Cured 7 days at 25 C

CHEMICAL RESISTANCE GUIDE
AP014 Ultra Filler combines saturated and unsaturated Polyester resins of medium to high reactivity. As an aid to the user,
chemical resistance evaluations were conducted using a modification of ASTM 0543-60T.

TESTING PROCEDURE
Samples nominally sized at 1/2″ x 1″ x 4″ were immersed halfway in 4 ounces of reagent and stored for 12 months at ambient
temperature. Reagents were swirled monthly, and specimens were rated every 4 weeks.

RATING RESULTS
Excellent, No Visible Attack Good, Very Slight Attack Not Recommended
Benzene
Gasoline
Methanol
Mineral Spirits
Water (Distilled)
Acetic Acid (5%)
Citric Acid
Hydrochloric Acid (10%)
Nitric Acid (10%)
Sodium Hydroxide (5%)
Sulfuric Acid (10%)
Acetone

TECHNICAL DATA SHEET
SikaBiresin AP014
February 19, Version 02 /2019

3

PROCESSING

PROCESSING CONDITIONS
Thoroughly blend 100 parts resin with 2 parts hardener by weight for 1 to 1 minutes in clean
dry container or on a clean dry surface.
Carefully scrape the surfaces while blending to ensure complete mixing and uniformity.

SURFACE PREPARATION and APPLICATION
The area to be filled or repaired should be thoroughly cleaned, roughened, cleaned again
and dried to allow for the best possible adhesion.
The mixed A P014 should be buttered into the area, avoiding trapping air during application.
After curing to a tack-free state, the material can be sanded and finished as needed.

MIXING INSTRUCTIONS
Stir contents of can thoroughly using a spatula or putty knife. Place the required amount of filler
and cream hardener on a disposable clean surface. Mix 100 parts paste to 2 parts BPO cream
hardener by weight; i.e. approximatly size of golf ball (paste) to a two inch strip of BPO catalyst. Set
up time of mix at room temperature will be 5-10 minutes. After 15-20 minutes the filler may be
filed or sanded to final finish.

HANDLING PRECAUTIONS

Normal health and safety precautions should be observed when handling these products :
Ensure good ventilation.
Wear gloves, glasses and protective clothes.
For further information, please consult the Safety Data Sheets.

STORAGE CONDITIONS

Product shelf life of polyester resin is 12 months when stored in original unopened containers
between 65 77 F (15 25 C). Any opened can must be tightly closed. Product shelf life of BPO
hardener is 18 months when stored in original unopened containers between 65 77 F (15 25 C).
Any opened can must be tightly closed.
Polyester resin contains filler which has the potential to separate in time, please re-homogenize
prior to use.

PACKAGING
Packaging information on request, please contact your local sales representative or find your local
contact on www.sikaadvancedresins.us

TECHNICAL DATA SHEET
SikaBiresin AP014
February 19, Version 02 /2019

4

LEGAL NOTICE

The information, and, in particular, the recommendations relating to the application and end-use of
Sika products, are given in good faith based on Sika s current knowledge and experience of the products
when properly stored, handled and applied under normal conditions in accordance with Sika s
recommendations. In practice, the differences in materials, substrates and actual site conditions are
such that no warranty in respect of merchantability or of fitness for a particular purpose, nor any liability
arising out of any legal relationship whatsoever, can be inferred either from this information, or from
any written recommendations, or from any other advice offered. The user of the product must test the
product s suitability for the intended application and purpose. Sika reserves the right to change the
properties of its products. The proprietary rights of third parties must be observed. All orders are
accepted subject to our current terms of sale and delivery. Users must always refer to the most recent
issue of the local Product Data Sheet for the product concerned, copies of which will be supplied on
request.

CONTACT ADVANCED RESINS
GERMANY
Stuttgarter Stra e 139
72574 Bad Urach GERMANY
Tel.: (+49) 7 125 940 492
Fax. : (+49) 7 125 940 401
E-mail : tooling@de.sika.com
Website : www.sikaadvancedresins.de
FRANCE
ZI des B thunes – 15, Rue de l Equerre
95310 Saint-Ouen-l Aum ne
CS 40444
95005 CERGY PONTOISE Cedex FRANCE
Tel.: (+33) 1 344 034 60
Fax: (+33) 1 342 197 87
E-mail: advanced.resins@fr.sika.com
Website : www.sikaadvancedresins.fr
SPAIN
Pol gon Industrial Congost – Guardaagulles, 8
08520 LES FRANQUESES DEL VALLES SPAIN
Tel.: (+34) 932 25 16 20
E-mail: spain@axson.com
Website: www.sikaadvancedresins.es
ITALY
Via Morandi 15
21047 Saronno (Va) ITALY
Tel.: (+39) 02 9670 2336
Fax: (+39) 02 9670 2369
E-mail: axson@axson.it
Website: www.sikaadvancedresins.it
UNITED KINGDOM
Unit 15 Studlands Park Ind. Estate
Newmarket Suffolk, CB8 7AU UNITED KINGDOM
Tel.: (+44) 1638 660 062
Fax: (+44) 1638 665 078
E-mail: sales.uk@axson.com
Website: www.sikaadvancedresins.uk
SLOVAKIA
Tovarenska 49
95301 ZLATE MORAVCE SLOVAKIA
Tel: (+421) 376 422 526
Fax: (+421) 376 422 527
E-mail: axson.sk@axson.com
Web site: www.sikaadvancedresins.sk
UNITED STATES
30800 Stephenson Highway
Madison Heights, Michigan 48071 USA
Tel.: (+1) 248 588-2270
Fax: (+1) 248 577-0810
E-mail: axsonmh@axson.com
Web site: www.sikaadvancedresins.us
MEXICO
Ignacio Ram rez #20
Despacho 202 Col. Tabacalera
C.P. 06030 CDMX MEXICO
Tel.: (+52) 55 5264 4922
Fax: (+52) 55 5264 4916
E-mail: marketing@axson.com.mx
Website: www.sikaadvancedresins.mx
CHINA
N 53 Tai Gu Road
Wai Gao Qiao
Free Trade Zone, Pudong
200131 Shanghai CHINA
T l.: (+86) 21 5868 3037
Fax: (+86) 21 5868 2601
E-mail: marketing.china@axson.com
Website: www.sikaadvancedresins .cn
JAPAN
2-5-12 Onishi Okazaki Aichi
444-0871 JAPAN
Tel.: (+81) 564 26 2591
Fax: (+81) 564 26 2593
E-mail: sales.japan@axson.com
Website: www.sikaadvancedresins.jp
INDIA
Office n 8, Building Symphony C – 3rd Floor
Range Hills Road
Bhosale Nagar
PUNE 411 020 INDIA
Tel: (+ 91) 20 25 56 07 10
Fax: (+ 91) 20 25 56 07 12
E-mail: info.india@axson.com
Website: www.sikaadvancedresins.in

80605769_TDS.pdf

by | Sep 27, 2025

SikaBiresin

AP007

1 /
2

PRODUCT DATA SHEET
SikaBiresin AP007
Version 01.01 (02 – 2024), en_US

PRODUCT DATA SHEET
SikaBiresin AP007 (Formerly APF 7)

Styrene- Free Polyester Filler with High Temperature Resistance

TYPICAL PHYSICAL PROPERTIES (FOR FURTHER VALUES SEE SAFETY DATA SHEET)

DESCRIPTION
SikaBiresin

AP007 is a styrene-free,
very fast setting, polyester-based,
industrial filler paste. It is specifically
formulated for filling, fairiring, and
repair applications and can be used in
high service temperatures applications
up to 400 F (204 C). When exposed to
elevated temperatures, SikaBiresin
AP007 has a tendency to darken,
however it does not gas, bubble, or
cause any finish distortion. SikaBiresin
AP007 bonds readily to itself or other
substrates, such as FRP/SMC, high
temperature epoxy molds, aluminum,
steel, cast iron, and urethane foam
parts. In its mixed, uncured state,
SikaBiresin AP007 has a smooth,
creamy consistency that enables the
user to make quick repairs with minimal
air entrapment.

PRODUCT BENEFITS
– Excellent adhesion
– Very fast setting
– Easy to use
– Minimal shrinkage
– High chemical and water resistance
– Excellent finishing / machinability
– High service temperature
– Low moisture absorption
– Above and below waterline applications
– High gloss finish

AREAS OF APPLICATION
SikaBiresin

AP007 is specifically
formulated for use in the aircraft,
aerospace, marine and other industries
that perform manufacturing and repair
work on items requiring room
temperature or above normal
temperature ranges. It may be used in
underwater applications.

Tests with actual materials and conditions
have to be performed to ensure satisfactory
performance.

Properties
SikaBiresin AP007 (A)
Resin
Cream
Hardener (B)
Composition Polyester Benzoyl peroxide
Mix ratio by weight 100 2
Aspect Thixotropic paste Liquid paste
Color White, gray, black White, black, red
Color (mixed) Various
Density at 77 F (25 C) (mixed) 13.6 lbs/gal (1.63 g/cc)
Pot life (102g) at 77 F (25 C) 4.0 7.0 Minutes
Volumetric Weight 0.061 lbs/in
3
(1.69 g/cc)

SikaBiresin

AP007

2

/
2

Sika Corporation
30800 Stephenson Highway
Madison Heights, MI 48071
U.S.A.
Telephone: +1 248- 577-0020
Email: tsmh@us.sika.com
www.sikausa.com

TYPICAL MECHANICAL AND THERMAL PROPERTIES

Cure schedule: 7 days at R.T. – 77F (25 C)
PROCESSING
Surface Preparation and Application
To ensure optimal adhesion, the area to be
filled or repaired should be thoroughly
cleaned, sanded/roughened, re-cleaned, and
allowed to dry prior to application.

Mixing Instructions
Stir contents of resin can thoroughly using a
spatula or putty knife. Place the required
amount of filler and cream hardener on a
disposable clean surface. Mix 100 parts paste
to 2 parts cream hardener by weight. Set up
time of mix at room temperature will be 10-
20 minutes

Application
The mixed SikaBiresin

AP007 should be
applied and worked into the area, taking
caution to avoid air entrapment. After curing
to a tack- free state, the material can be
sanded and finished as needed .
Normal health and safety precautions should be
observed when handling these products:
Ensure adequate ventilation
Wear gloves, glasses, and protective clothes
For further information, please consult the Safety
Data Sheets

STORAGE CONDITIONS
Product shelf life of SikaBiresin AP007 (A) is
12 months when stored in original unopened
containers between 65 77 F (15 25 C).
Shelf life of Cream Hardener (B) is
18 months when stored in original unopened
containers between 65 77 F (15 25 C).
Keep containers tightly closed. Polyester
resin contains filler which has the potential to
separate in time, please re-homogenize prior
to use.

PACKAGING INFORMATION
Packaging information is available upon
request. Please contact your local Sika sales
representative.

FURTHER INFORMATION
Advice on specific applications will be given on
request. To contact Sika Corporation s Industry
Technical Services Department, send an email to
tsmh@us.sika.com. Copies of Safety Data
Sheets and Product Data Sheets are available
upon request.

BASIS OF PRODUCT DATA
All technical data stated in this document are
based on laboratory tests. Actual measured data
may vary due to circumstances beyond our
control.

ENVIRONMENTAL, HEALTH AND SAFETY
For further information and advice regarding
transportation, handling, storage and disposal of
chemical products, user should refer to the
actual Safety Data Sheets containing physical,
environmental, toxicological and other safety
related data. User must read the current
actual Safety Data Sheets before using any
products. In case of an emergency, call
CHEMTREC at 1-800-424-9300, International
03-527-3887.

LEGAL DISCLAIMER
Prior to each use of any product of Sika Corporation,
its subsidiaries or affiliates ( SIKA ), the user must
always read and follow the warnings and
instructions on the product s most current product
label, Product Data Sheet and Safety Data Sheet
which are available at usa.sika.com or by contacting
SIKA s Technical Service Department via email at
tsmh@us.sika.com. Nothing contained in any SIKA
literature or materials relieves the user of the
obligation to read and follow the warnings and
instructions for each SIKA product as set forth in the
current product label, Product Data Sheet and
Safety Data Sheet prior to use of the SIKA product.
SIKA warrants this product for one year from date
of installation to be free from manufacturing
defects and to meet the technical properties on the
current Product Data Sheet if used as directed
within the product s shelf life. User determines
suitability of product for intended use and assumes
all risks. User s and/or buyer s sole remedy shall be
limited to the purchase price or replacement of this
product exclusive of any labor costs. NO OTHER
WARRANTIES EXPRESS OR IMPLIED SHALL APPLY
INCLUDING ANY WARRANTY OF
MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE. SIKA SHALL NOT BE LIABLE
UNDER ANY LEGAL THEORY FOR SPECIAL OR
CONSEQUENTIAL DAMAGES. SIKA SHALL NOT BE
RESPONSIBLE FOR THE USE OF THIS PRODUCT IN A
MANNER TO INFRINGE ON ANY PATENT OR ANY
OTHER INTELLECTUAL PROPERTY RIGHTS HELD BY
OTHERS. Sale of SIKA products are subject to the
Terms and Conditions of Sale which are available at
https://usa.sika.com/en/group/SikaCorp/termsand
conditions.html or by calling +1 800-933-7452.

Properties, Test Method
SikaBiresin AP007 (A)
Resin
Cream Hardener
Hardness, shore D ASTM D2240 85
Flexural strength, ASTM D790

6,280 psi (43 MPa)
Tensile strength, ASTM D638

3,150 psi (22 Mpa)
Compressive Strength, ASTM D695

9,870 psi (68 Mpa)
Peak service temperature 400 F (204 C)

44SRX-20_TDS.pdf

by | Sep 27, 2025

4515 St. Clair Ave. Cleveland, OH 44103
216-391-1010
www.dayglo.com
Technical Data Sheet

Disclaimer: Our technical advice, information, statements, whether given verbally, in writing, or in the form of test results, is offered
for your guidance without warranty. No warranty for fitness for a particular purpose is made. This also applies where protective
rights of third parties are involved. It does not release the user from obligation to test the suitability of the products and formulas for
the intended process and applications. Our guarantee is limited to the consistent quality of our product.
SCREAMIN
General Description
DayGlo SRX latex paint is a premium, low odor,
fluorescent, water-based paint. Maximum lightfastness
and film integrity are dependent upon the use of
DayGlo SRX Filteray W (clear overcoat) which is
described below.
* Studies indicate that if an all-purpose single color is
desired for impact, Blaze Orange is generally best for
contrast with most natural backgrounds. DayGlo s
fluorescent colors do not tend to appear white, gray, or black (achromatic) at extreme distances
and at dusk, dawn or low light conditions as do most non-fluorescent colors. This is a huge
benefit for signage and any product that needs to be seen in a work environment for safety or
efficiency.
** Filteray W is a clear overcoat designed for use over the SRX fluorescent latex paint. The
Filteray W absorbs some of the harmful rays of the sun that cause premature fading of
fluorescent colors during continued exposure to direct sunlight. A topcoat of Filteray W can
double the lightfastness of DayGlo s fluorescent colors. Ordinary varnishes and overcoats do
not have the protective action of the SRX Filteray W overcoat and can do more harm than good
when used over DayGlo s fluorescent colors.
The final surface produced by the Filteray W overcoat is harder and has a higher gloss than the
DayGlo SRX latex paint alone. This means that it will be more resistant to wear and more easily
cleaned. The quantity of Filteray W overcoat required is usually 2/3 that of the paint.
Features
Formaldehyde Free Formulation
Low Odor
Environmentally Friendly
100% Acrylic Latex

Physical properties
Grind 5.0 Min Hegman Gage
Viscosity 1,500 – 2,500 cps @ 77*F
pH 8.00-9.00

Available Colors
Product Code Color
SRX-11 Aurora Pink
SRX-13 Rocket Red
SRX-15 Blaze Orange*
SRX-17 Saturn Yellow
SRX-18 Signal Green
SRX-19 Horizon Blue
SRX-20 Ultra Violet
SRX-08A Filteray W**

4515 St. Clair Ave. Cleveland, OH 44103
216-391-1010
www.dayglo.com
Technical Data Sheet

Disclaimer: Our technical advice, information, statements, whether given verbally, in writing, or in the form of test results, is offered
for your guidance without warranty. No warranty for fitness for a particular purpose is made. This also applies where protective
rights of third parties are involved. It does not release the user from obligation to test the suitability of the products and formulas for
the intended process and applications. Our guarantee is limited to the consistent quality of our product.
Applications
The DayGlo SRX latex paint can be used anywhere that requires a high visibility brushing paint.
Some of the general areas of use include:
Theatrical and Special Effects: For use in haunted houses and stage painting. They can also be
used to create 3- D images.
Graphic Arts: For outdoor advertising signs, murals, painted bulletins, store signs, truck signs,
and trade exhibits.
Safety: For aviation, industrial and marine uses on aircraft, ground support equipment,
navigational aids, safety markings, equipment, machinery, fire protection equipment, first aid
kits, traffic controls, boats, buoys, docks, and life- saving equipment.
Hobby-Sports: For use on models and toys, markings on easily lost sporting equipment
(boomerangs, arrows, fishing gear) and identification markings on personal equipment.
Lightfastness
The useful outdoor life of the color is determined by the thickness and uniformity of the DayGlo
SRX coating. For greatly increased resistance to sunlight, an overcoat of SRX Filteray W is
required.
The following table gives a guide to expected lightfastness. The lower number is representative
of exposure in southern latitudes; the larger number in northern latitudes.

1 heavy coat of DayGlo SRX paint (1.5 mils
dry)
3-6 Months

1 heavy coat of DayGlo SRX paint (1.5 mils
dry) +
1 uniform overcoat of Filteray W (1.5 mils dry)
6-12 Months

2 heavy coats of DayGlo SRX paint (3 mils dry)
+
1 uniform overcoat of Filteray W (1.5 mils dry)
12-24 Months

One coat of DayGlo SRX latex paint is usually sufficient for interior markings, as the color is
virtually unaffected by light sources other than direct sunlight. For storefronts, panel truck signs,
etc., which must last a year or more, apply a coat of Filteray W overcoat over two coats of
DayGlo SRX latex paint.

4515 St. Clair Ave. Cleveland, OH 44103
216-391-1010
www.dayglo.com
Technical Data Sheet

Disclaimer: Our technical advice, information, statements, whether given verbally, in writing, or in the form of test results, is offered
for your guidance without warranty. No warranty for fitness for a particular purpose is made. This also applies where protective
rights of third parties are involved. It does not release the user from obligation to test the suitability of the products and formulas for
the intended process and applications. Our guarantee is limited to the consistent quality of our product.
General Application Instructions
Undercoat:
DayGlo SRX latex paints are semi-transparent and, therefore, brightest when applied over a
clean, white surface. White semi-gloss latex coatings, flat white latex undercoaters, water
based primer-sealers and water-based bulletin blockout whites are ideally suited for this
purpose.
Over old finishes, clean and sand before applying a white undercoat or primer that offers good
adhesion to both the old finish and new DayGlo paint. However, best performance can be
achieved by removing old finishes and starting with a freshly primed surface.
SRX Latex Paint Color Coat:
1. Stir well and if thinning is necessary, use water. (AVOID OVER THINNING).
2. Apply one heavy coat of DayGlo SRX latex paint with a soft brush. Use short strokes.
Cover completely and smooth out as you go to produce a uniform deep layer
(approximately 1.5 mils thick dry). Keep in mind that thin spots or streaks will fade
prematurely. Allow to set-up or “top dry” at least 10 minutes (@ 70oF).
3. Apply the second coat same as the first. Allow 3 hours to dry before applying DayGlo
SRX Filteray W overcoat.
4. For sign applications, the DayGlo SRX coat can simply be roughed in, slightly
overlapping the copy line. Your copy line will not be hidden because DayGlo SCR paint
is semi-transparent. Do not try to work the paint exactly to a line. An opaque
background should be used to cut in accurately to the copy line for sharp detail after the
DayGlo SRX paint has top dried 24 hours.

Filteray Type D Overcoat:
1. Apply one heavy coat of DayGlo SRX Filteray W overcoat (1.5 mils dry). Thin, only if
necessary, using water. This product works best when applied by brush.
2. Allow surface to dry 2 hours before putting into service.
3. Clean brushes should always be used. After use, they can be cleaned up with warm
water.
4. Application of Filteray W will cause the color to deepen. It will have a glossy finish.
5. The use of Filteray W will diminish the UV response of the finished paint.

Tips For Use/Storage:
DayGlo SRX latex paint and Filteray W overcoat may be applied by spray gun. Stir well
and thin to spraying consistency using water, then strain.
The nominal shelf life of the SRX latex paint and Filteray W overcoat is one year in
unopened cans. These products should be stirred before use.

Avoid freezing and close can tightly when not in use. Use with adequate ventilation.

44SRX-19_TDS.pdf