08E47602P1_TDS.pdf

by | Sep 27, 2025

TECHNICAL DATA SHEE T
VAC-PAK

E4760
RELEASE FILM

Aerovac
955-10 National Parkway
Schaumburg, IL 60 173
USA

TDS VPK E4760_0 2.21_Issue1

VAC-PAK

E4760
Release film
Ideally suited to aerospace applications
Features and Benefits
Clear or blue tinted modified polymer release film
providing excellent release capabilities from epoxy,
phenolic, polyester and other resin systems without
contamination.
Specifically developed for use in mild contours and
flat panel applications.
With 300% elongation and 204 C (400 F) capabilities,
this is an economical alternative.
Available perforated or non- perforated.

PROPERTIES
Maximum use temperature 204 C 400 F
Color Clear and blue
Film PMP
Standard perforation patters Contact us for full details
Tensile strength (at break) 36MPa 4400psi
Elongation (at break) 300%
Yield 46.6m /kg 228 ft /lb/mil
AVAILABILITY
Thicknesses 38 and 51 m 0.0015 and 0.002in
Standard widths Up to 1.83m Up to 72in
Standard length Up to 549m Up to 600yd
STORAGE
Store in original packaging
HEALTH & SAFETY
Please refer to the product MSDS for safe handling, personal protective equipment recommendations and disposal
considerations.

DISCLAIMER: The data and information provided in this document have been obtained from carefully controlled samples and are considered to be
representative of the product described. Aerovac does not express or imply any guarantee or warranty of any kind including, but not limited to, the accuracy, the
completeness or the relevance of the data and information set out herein. Because the properties of this product can be significantly affected by the fabrication
and testing techniques employed, and since Aerovac does not control the conditions under which its products are tested and used, Aerovac cannot guarantee
the properties provided will be obtained with other processes and equipment. No guarantee or warranty is provided if the product is adapted for a s pecific use or
purpose. Aerovac declines any liability with respect to the use made by any third party of the data and information contained herein. Aerovac has the right to
change any data or information when deemed appropriate. All trademarks are the property of their respective owners. 2021 , Aerovac. All rights reserved.

08E3760-54_TDS.pdf

by | Sep 27, 2025

TECHNICAL DATA SHEE T
VAC-PAK

E3760
RELEASE FILM

Aerovac
955-10 National Parkway
Schaumburg, IL 60 173
USA

TDS VPK E3760_0 2.21_Issue1

VAC-PAK

E3760
Release film
Ideally suited to mild contour and flat panel applications
Features and Benefits
Excellent for mild contour and flat parts as it will lie
flat and smooth, with little wrinkling issues, as
experienced with other, more pliable, release films.
Available perforated or non- perforated.

PROPERTIES
Maximum use temperature 204 C 400 F
Color Clear and white
Film PVF
Standard perforation patters Contact us for full details
Tensile strength at break 69MPa 10,000psi
Elongation (at break) 200%
Yield 28.6m /kg 140ft /lb/mil
AVAILABILITY
Thicknesses 25 and 50 m 0.001 and 0.002in
Standard widths Up to 3m Up to 118in
Standard length Up to 914m Up to 3000ft
STORAGE
Store in original packaging
HEALTH & SAFETY
Please refer to the product MSDS for safe handling, personal protective equipment recommendations and disposal
considerations.

DISCLAIMER: The data and information provided in this document have been obtained from carefully controlled samples and are considered to be
representative of the product described. Aerovac does not express or imply any guarantee or warranty of any kind including, but not limited to, the accuracy, the
completeness or the relevance of the data and information set out herein. Because the properties of this product can be significantly affected by the fabrication
and testing techniques employed, and since Aerovac does not control the conditions under which its products are tested and used, Aerovac cannot guarantee
the properties provided will be obtained with other processes and equipment. No guarantee or warranty is provided if the product is adapted for a s pecific use or
purpose. Aerovac declines any liability with respect to the use made by any third party of the data and information contained herein. Aerovac has the right to
change any data or information when deemed appropriate. All trademarks are the property of their respective owners. 2021 , Aerovac. All rights reserved.

08E2760P6_TDS.pdf

by | Sep 27, 2025

TECHNICAL DATA SHEE T
VAC-PAK

E2760
RELEASE FILM

Aerovac
955-10 National Parkway
Schaumburg, IL 60 173
USA

TDS VPK E2760_0 2.21_Issue1

VAC-PAK

E2760
Release film
Ideally suited to highly contours parts applications
Features and Benefits
Economical, high elongation and low temperature
release film with excellent conformability.
Designed for use on highly contoured parts for cure
temperatures up to 121 C, it offers good release in
the curing temperature range of most polyesters,
vinylesters, phenolic and some epoxies, as well as
others applications where release films are required.
Colored red for easy identification and removal from
parts.
Available in perforated and non- perforated.
Please call for available perforations.
PROPERTIES
Maximum use temperature 121 C 250 F
Color Red
Tensile modulus <2000 Elongation at break (ASTM D882) >800%
AVAILABILITY
Thickness 50, 75 m 0.002, 0.003in
Widths 1.52m X 304.8m 60in X 1000ft
Formats available Sheet
STORAGE
Do not store rolls vertically on their ends
HEALTH & SAFETY
Please refer to the product MSDS for safe handling, personal protective equipment recommendations and disposal
considerations.

DISCLAIMER: The data and information provided in this document have been obtained from carefully controlled samples and are considered to be
representative of the product described. Aerovac does not express or imply any guarantee or warranty of any kind including, but not limited to, the accuracy, the
completeness or the relevance of the data and information set out herein. Because the properties of this product can be significantly affected by the fabrication
and testing techniques employed, and since Aerovac does not control the conditions under which its products are tested and used, Aerovac cannot guarantee
the properties provided will be obtained with other processes and equipment. No guarantee or warranty is provided if the product is adapted for a s pecific use or
purpose. Aerovac declines any liability with respect to the use made by any third party of the data and information contained herein. Aerovac has the right to
change any data or information when deemed appropriate. All trademarks are the property of their respective owners. 2021 , Aerovac. All rights reserved.

08E2760-60_TDS.pdf

by | Sep 27, 2025

TECHNICAL DATA SHEE T
VAC-PAK

E2760
RELEASE FILM

Aerovac
955-10 National Parkway
Schaumburg, IL 60 173
USA

TDS VPK E2760_0 2.21_Issue1

VAC-PAK

E2760
Release film
Ideally suited to highly contours parts applications
Features and Benefits
Economical, high elongation and low temperature
release film with excellent conformability.
Designed for use on highly contoured parts for cure
temperatures up to 121 C, it offers good release in
the curing temperature range of most polyesters,
vinylesters, phenolic and some epoxies, as well as
others applications where release films are required.
Colored red for easy identification and removal from
parts.
Available in perforated and non- perforated.
Please call for available perforations.
PROPERTIES
Maximum use temperature 121 C 250 F
Color Red
Tensile modulus <2000 Elongation at break (ASTM D882) >800%
AVAILABILITY
Thickness 50, 75 m 0.002, 0.003in
Widths 1.52m X 304.8m 60in X 1000ft
Formats available Sheet
STORAGE
Do not store rolls vertically on their ends
HEALTH & SAFETY
Please refer to the product MSDS for safe handling, personal protective equipment recommendations and disposal
considerations.

DISCLAIMER: The data and information provided in this document have been obtained from carefully controlled samples and are considered to be
representative of the product described. Aerovac does not express or imply any guarantee or warranty of any kind including, but not limited to, the accuracy, the
completeness or the relevance of the data and information set out herein. Because the properties of this product can be significantly affected by the fabrication
and testing techniques employed, and since Aerovac does not control the conditions under which its products are tested and used, Aerovac cannot guarantee
the properties provided will be obtained with other processes and equipment. No guarantee or warranty is provided if the product is adapted for a s pecific use or
purpose. Aerovac declines any liability with respect to the use made by any third party of the data and information contained herein. Aerovac has the right to
change any data or information when deemed appropriate. All trademarks are the property of their respective owners. 2021 , Aerovac. All rights reserved.

08D300360_TDS.pdf

by | Sep 27, 2025

TECHNICAL DATA SHEE T
D300
PEEL PLY

Aerovac
955-10 National Parkway
Schaumburg, IL 60 173
USA

TDS D300_0 2.21_Issue1

D300
Peel ply
Ideally suited to aerospace applications

Features and Benefits
Porous, medium weight nylon 6.6 peel ply.
Heat set and scoured, for use directly against
laminates or bond lines.
Available coated or non-coated depending on user
requirement.
Recommended for composite manufacture and
metal bonding applications.

Coloured pink or white with red pinstripe for ease of
detection and removal from the cured laminate.
Solvay does not recommend the use of woven nylon
fabrics with phenolic resin or prepreg systems as acid
in the catalyst can break down nylon materials.
Therefore, we recommend that customers conduct
their own internal capability tests.
PROPERTIES

Maximum use temperature 204 C 400 F
Color Pink
Fabric type Nylon
Fabric weight 94g/m 2.81oz/yd
AVAILABILITY

Standard width 1.52m 1.66yd
Standard length 100m 109yd
Slit widths available
STORAGE
No special storage conditions required.
HEALTH & SAFETY
Please refer to the product MSDS for safe handling, personal protective equipment recommendations and disposal
considerations.

DISCLAIMER: The data and information provided in this document have been obtained from carefully controlled samples and are considered to be
representative of the product described. Aerovac does not express or imply any guarantee or warranty of any kind including, but not limited to, the accuracy, the
completeness or the relevance of the data and information set out herein. Because the properties of this product can be significantly affected by the fabrication
and testing techniques employed, and since Aerovac does not control the conditions under which its products are tested and used, Aerovac cannot guarantee
the properties provided will be obtained with other processes and equipment. No guarantee or warranty is provided if the product is adapted for a s pecific use or
purpose. Aerovac declines any liability with respect to the use made by any third party of the data and information contained herein. Aerovac has the right to
change any data or information when deemed appropriate. All trademarks are the property of their respective owners. 2021 , Aerovac. All rights reserved.