by | Sep 27, 2025
TECHNICAL DATA SHEE T
VAC-PAK
A6200/A6200M & A6000
RELEASE FILM
Aerovac
955-10 National Parkway
Schaumburg, IL 60 173
USA
TDS VPK A6200/A6200M & A6000_0 2.21_Issue1
VAC-PAK
A6200/A6200M & A6000
Release film
Ideally suited to aerospace applications
Features and Benefits
High temperature, tough fluropolymer release
films with excellent release characteristics
combined with high elongation.
Suitable for use with all commonly used resin
systems.
Available perforated or non- perforated
Most commonly used in aerospace applications
and has numerous OEM approvals.
Clear blue or red for ease of identification on the
cured laminate.
Vac-Pak
A6200M has a one-sided textured finish
to meet matte surface finish requirements
PROPERTIES
Melting point 262 C 503 F
Color Clear blue and red
Film ETFE
Standard perforation patterns Contact us for full details
Tensile strength (at break) 40/70MPa 6000/10000psi
Elongation (at break) 350%
Yield 10.2m /kg 110 ft /lb/mil
The user shall determine the suitability of the products for their intended use prior to purchase and shall assume all
risk and liability in connection therewith.
AVAILABILITY Thicknesses 12, 15, 20 and 25 m 0.0005, 0.0006, 0.001 and 0.002in
Standard length Available on request
STORAGE
Store in original packaging
HEALTH & SAFETY
Please refer to the product MSDS for safe handling, personal protective equipment recommendations and disposal
considerations.
DISCLAIMER: The data and information provided in this document have been obtained from carefully controlled samples and are considered to be
representative of the product described. Aerovac does not express or imply any guarantee or warranty of any kind including, but not limited to, the accuracy, the
completeness or the relevance of the data and information set out herein. Because the properties of this product can be significantly affected by the fabrication
and testing techniques employed, and since Aerovac does not control the conditions under which its products are tested and used, Aerovac cannot guarantee
the properties provided will be obtained with other processes and equipment. No guarantee or warranty is provided if the product is adapted for a s pecific use or
purpose. Aerovac declines any liability with respect to the use made by any third party of the data and information contained herein. Aerovac has the right to
change any data or information when deemed appropriate. All trademarks are the property of their respective owners. 2021 , Aerovac. All rights reserved.
by | Sep 27, 2025
TECHNICAL DATA SHEE T
VAC-PAK
A6200/A6200M & A6000
RELEASE FILM
Aerovac
955-10 National Parkway
Schaumburg, IL 60 173
USA
TDS VPK A6200/A6200M & A6000_0 2.21_Issue1
VAC-PAK
A6200/A6200M & A6000
Release film
Ideally suited to aerospace applications
Features and Benefits
High temperature, tough fluropolymer release
films with excellent release characteristics
combined with high elongation.
Suitable for use with all commonly used resin
systems.
Available perforated or non- perforated
Most commonly used in aerospace applications
and has numerous OEM approvals.
Clear blue or red for ease of identification on the
cured laminate.
Vac-Pak
A6200M has a one-sided textured finish
to meet matte surface finish requirements
PROPERTIES
Melting point 262 C 503 F
Color Clear blue and red
Film ETFE
Standard perforation patterns Contact us for full details
Tensile strength (at break) 40/70MPa 6000/10000psi
Elongation (at break) 350%
Yield 10.2m /kg 110 ft /lb/mil
The user shall determine the suitability of the products for their intended use prior to purchase and shall assume all
risk and liability in connection therewith.
AVAILABILITY Thicknesses 12, 15, 20 and 25 m 0.0005, 0.0006, 0.001 and 0.002in
Standard length Available on request
STORAGE
Store in original packaging
HEALTH & SAFETY
Please refer to the product MSDS for safe handling, personal protective equipment recommendations and disposal
considerations.
DISCLAIMER: The data and information provided in this document have been obtained from carefully controlled samples and are considered to be
representative of the product described. Aerovac does not express or imply any guarantee or warranty of any kind including, but not limited to, the accuracy, the
completeness or the relevance of the data and information set out herein. Because the properties of this product can be significantly affected by the fabrication
and testing techniques employed, and since Aerovac does not control the conditions under which its products are tested and used, Aerovac cannot guarantee
the properties provided will be obtained with other processes and equipment. No guarantee or warranty is provided if the product is adapted for a s pecific use or
purpose. Aerovac declines any liability with respect to the use made by any third party of the data and information contained herein. Aerovac has the right to
change any data or information when deemed appropriate. All trademarks are the property of their respective owners. 2021 , Aerovac. All rights reserved.
by | Sep 27, 2025
TECHNICAL DATA SHEE T
VAC-PAK
A6200/A6200M & A6000
RELEASE FILM
Aerovac
955-10 National Parkway
Schaumburg, IL 60 173
USA
TDS VPK A6200/A6200M & A6000_0 2.21_Issue1
VAC-PAK
A6200/A6200M & A6000
Release film
Ideally suited to aerospace applications
Features and Benefits
High temperature, tough fluropolymer release
films with excellent release characteristics
combined with high elongation.
Suitable for use with all commonly used resin
systems.
Available perforated or non- perforated
Most commonly used in aerospace applications
and has numerous OEM approvals.
Clear blue or red for ease of identification on the
cured laminate.
Vac-Pak
A6200M has a one-sided textured finish
to meet matte surface finish requirements
PROPERTIES
Melting point 262 C 503 F
Color Clear blue and red
Film ETFE
Standard perforation patterns Contact us for full details
Tensile strength (at break) 40/70MPa 6000/10000psi
Elongation (at break) 350%
Yield 10.2m /kg 110 ft /lb/mil
The user shall determine the suitability of the products for their intended use prior to purchase and shall assume all
risk and liability in connection therewith.
AVAILABILITY Thicknesses 12, 15, 20 and 25 m 0.0005, 0.0006, 0.001 and 0.002in
Standard length Available on request
STORAGE
Store in original packaging
HEALTH & SAFETY
Please refer to the product MSDS for safe handling, personal protective equipment recommendations and disposal
considerations.
DISCLAIMER: The data and information provided in this document have been obtained from carefully controlled samples and are considered to be
representative of the product described. Aerovac does not express or imply any guarantee or warranty of any kind including, but not limited to, the accuracy, the
completeness or the relevance of the data and information set out herein. Because the properties of this product can be significantly affected by the fabrication
and testing techniques employed, and since Aerovac does not control the conditions under which its products are tested and used, Aerovac cannot guarantee
the properties provided will be obtained with other processes and equipment. No guarantee or warranty is provided if the product is adapted for a s pecific use or
purpose. Aerovac declines any liability with respect to the use made by any third party of the data and information contained herein. Aerovac has the right to
change any data or information when deemed appropriate. All trademarks are the property of their respective owners. 2021 , Aerovac. All rights reserved.
by | Sep 27, 2025
TECHNICAL DATA SHEE T
VAC-PAK
A6200/A6200M & A6000
RELEASE FILM
Aerovac
955-10 National Parkway
Schaumburg, IL 60 173
USA
TDS VPK A6200/A6200M & A6000_0 2.21_Issue1
VAC-PAK
A6200/A6200M & A6000
Release film
Ideally suited to aerospace applications
Features and Benefits
High temperature, tough fluropolymer release
films with excellent release characteristics
combined with high elongation.
Suitable for use with all commonly used resin
systems.
Available perforated or non- perforated
Most commonly used in aerospace applications
and has numerous OEM approvals.
Clear blue or red for ease of identification on the
cured laminate.
Vac-Pak
A6200M has a one-sided textured finish
to meet matte surface finish requirements
PROPERTIES
Melting point 262 C 503 F
Color Clear blue and red
Film ETFE
Standard perforation patterns Contact us for full details
Tensile strength (at break) 40/70MPa 6000/10000psi
Elongation (at break) 350%
Yield 10.2m /kg 110 ft /lb/mil
The user shall determine the suitability of the products for their intended use prior to purchase and shall assume all
risk and liability in connection therewith.
AVAILABILITY Thicknesses 12, 15, 20 and 25 m 0.0005, 0.0006, 0.001 and 0.002in
Standard length Available on request
STORAGE
Store in original packaging
HEALTH & SAFETY
Please refer to the product MSDS for safe handling, personal protective equipment recommendations and disposal
considerations.
DISCLAIMER: The data and information provided in this document have been obtained from carefully controlled samples and are considered to be
representative of the product described. Aerovac does not express or imply any guarantee or warranty of any kind including, but not limited to, the accuracy, the
completeness or the relevance of the data and information set out herein. Because the properties of this product can be significantly affected by the fabrication
and testing techniques employed, and since Aerovac does not control the conditions under which its products are tested and used, Aerovac cannot guarantee
the properties provided will be obtained with other processes and equipment. No guarantee or warranty is provided if the product is adapted for a s pecific use or
purpose. Aerovac declines any liability with respect to the use made by any third party of the data and information contained herein. Aerovac has the right to
change any data or information when deemed appropriate. All trademarks are the property of their respective owners. 2021 , Aerovac. All rights reserved.
by | Sep 27, 2025
TECHNICAL DATA SHEE T
VAC-PAK
A6200/A6200M & A6000
RELEASE FILM
Aerovac
955-10 National Parkway
Schaumburg, IL 60 173
USA
TDS VPK A6200/A6200M & A6000_0 2.21_Issue1
VAC-PAK
A6200/A6200M & A6000
Release film
Ideally suited to aerospace applications
Features and Benefits
High temperature, tough fluropolymer release
films with excellent release characteristics
combined with high elongation.
Suitable for use with all commonly used resin
systems.
Available perforated or non- perforated
Most commonly used in aerospace applications
and has numerous OEM approvals.
Clear blue or red for ease of identification on the
cured laminate.
Vac-Pak
A6200M has a one-sided textured finish
to meet matte surface finish requirements
PROPERTIES
Melting point 262 C 503 F
Color Clear blue and red
Film ETFE
Standard perforation patterns Contact us for full details
Tensile strength (at break) 40/70MPa 6000/10000psi
Elongation (at break) 350%
Yield 10.2m /kg 110 ft /lb/mil
The user shall determine the suitability of the products for their intended use prior to purchase and shall assume all
risk and liability in connection therewith.
AVAILABILITY Thicknesses 12, 15, 20 and 25 m 0.0005, 0.0006, 0.001 and 0.002in
Standard length Available on request
STORAGE
Store in original packaging
HEALTH & SAFETY
Please refer to the product MSDS for safe handling, personal protective equipment recommendations and disposal
considerations.
DISCLAIMER: The data and information provided in this document have been obtained from carefully controlled samples and are considered to be
representative of the product described. Aerovac does not express or imply any guarantee or warranty of any kind including, but not limited to, the accuracy, the
completeness or the relevance of the data and information set out herein. Because the properties of this product can be significantly affected by the fabrication
and testing techniques employed, and since Aerovac does not control the conditions under which its products are tested and used, Aerovac cannot guarantee
the properties provided will be obtained with other processes and equipment. No guarantee or warranty is provided if the product is adapted for a s pecific use or
purpose. Aerovac declines any liability with respect to the use made by any third party of the data and information contained herein. Aerovac has the right to
change any data or information when deemed appropriate. All trademarks are the property of their respective owners. 2021 , Aerovac. All rights reserved.
by | Sep 27, 2025
TECHNICAL DATA SHEE T
VAC-PAK
A6200/A6200M & A6000
RELEASE FILM
Aerovac
955-10 National Parkway
Schaumburg, IL 60 173
USA
TDS VPK A6200/A6200M & A6000_0 2.21_Issue1
VAC-PAK
A6200/A6200M & A6000
Release film
Ideally suited to aerospace applications
Features and Benefits
High temperature, tough fluropolymer release
films with excellent release characteristics
combined with high elongation.
Suitable for use with all commonly used resin
systems.
Available perforated or non- perforated
Most commonly used in aerospace applications
and has numerous OEM approvals.
Clear blue or red for ease of identification on the
cured laminate.
Vac-Pak
A6200M has a one-sided textured finish
to meet matte surface finish requirements
PROPERTIES
Melting point 262 C 503 F
Color Clear blue and red
Film ETFE
Standard perforation patterns Contact us for full details
Tensile strength (at break) 40/70MPa 6000/10000psi
Elongation (at break) 350%
Yield 10.2m /kg 110 ft /lb/mil
The user shall determine the suitability of the products for their intended use prior to purchase and shall assume all
risk and liability in connection therewith.
AVAILABILITY Thicknesses 12, 15, 20 and 25 m 0.0005, 0.0006, 0.001 and 0.002in
Standard length Available on request
STORAGE
Store in original packaging
HEALTH & SAFETY
Please refer to the product MSDS for safe handling, personal protective equipment recommendations and disposal
considerations.
DISCLAIMER: The data and information provided in this document have been obtained from carefully controlled samples and are considered to be
representative of the product described. Aerovac does not express or imply any guarantee or warranty of any kind including, but not limited to, the accuracy, the
completeness or the relevance of the data and information set out herein. Because the properties of this product can be significantly affected by the fabrication
and testing techniques employed, and since Aerovac does not control the conditions under which its products are tested and used, Aerovac cannot guarantee
the properties provided will be obtained with other processes and equipment. No guarantee or warranty is provided if the product is adapted for a s pecific use or
purpose. Aerovac declines any liability with respect to the use made by any third party of the data and information contained herein. Aerovac has the right to
change any data or information when deemed appropriate. All trademarks are the property of their respective owners. 2021 , Aerovac. All rights reserved.
by | Sep 27, 2025
TECHNICAL DATA SHEE T
VAC-PAK
A6200/A6200M & A6000
RELEASE FILM
Aerovac
955-10 National Parkway
Schaumburg, IL 60 173
USA
TDS VPK A6200/A6200M & A6000_0 2.21_Issue1
VAC-PAK
A6200/A6200M & A6000
Release film
Ideally suited to aerospace applications
Features and Benefits
High temperature, tough fluropolymer release
films with excellent release characteristics
combined with high elongation.
Suitable for use with all commonly used resin
systems.
Available perforated or non- perforated
Most commonly used in aerospace applications
and has numerous OEM approvals.
Clear blue or red for ease of identification on the
cured laminate.
Vac-Pak
A6200M has a one-sided textured finish
to meet matte surface finish requirements
PROPERTIES
Melting point 262 C 503 F
Color Clear blue and red
Film ETFE
Standard perforation patterns Contact us for full details
Tensile strength (at break) 40/70MPa 6000/10000psi
Elongation (at break) 350%
Yield 10.2m /kg 110 ft /lb/mil
The user shall determine the suitability of the products for their intended use prior to purchase and shall assume all
risk and liability in connection therewith.
AVAILABILITY Thicknesses 12, 15, 20 and 25 m 0.0005, 0.0006, 0.001 and 0.002in
Standard length Available on request
STORAGE
Store in original packaging
HEALTH & SAFETY
Please refer to the product MSDS for safe handling, personal protective equipment recommendations and disposal
considerations.
DISCLAIMER: The data and information provided in this document have been obtained from carefully controlled samples and are considered to be
representative of the product described. Aerovac does not express or imply any guarantee or warranty of any kind including, but not limited to, the accuracy, the
completeness or the relevance of the data and information set out herein. Because the properties of this product can be significantly affected by the fabrication
and testing techniques employed, and since Aerovac does not control the conditions under which its products are tested and used, Aerovac cannot guarantee
the properties provided will be obtained with other processes and equipment. No guarantee or warranty is provided if the product is adapted for a s pecific use or
purpose. Aerovac declines any liability with respect to the use made by any third party of the data and information contained herein. Aerovac has the right to
change any data or information when deemed appropriate. All trademarks are the property of their respective owners. 2021 , Aerovac. All rights reserved.
by | Sep 27, 2025
TECHNICAL DATA SHEE T
VAC-PAK
A6200/A6200M & A6000
RELEASE FILM
Aerovac
955-10 National Parkway
Schaumburg, IL 60 173
USA
TDS VPK A6200/A6200M & A6000_0 2.21_Issue1
VAC-PAK
A6200/A6200M & A6000
Release film
Ideally suited to aerospace applications
Features and Benefits
High temperature, tough fluropolymer release
films with excellent release characteristics
combined with high elongation.
Suitable for use with all commonly used resin
systems.
Available perforated or non- perforated
Most commonly used in aerospace applications
and has numerous OEM approvals.
Clear blue or red for ease of identification on the
cured laminate.
Vac-Pak
A6200M has a one-sided textured finish
to meet matte surface finish requirements
PROPERTIES
Melting point 262 C 503 F
Color Clear blue and red
Film ETFE
Standard perforation patterns Contact us for full details
Tensile strength (at break) 40/70MPa 6000/10000psi
Elongation (at break) 350%
Yield 10.2m /kg 110 ft /lb/mil
The user shall determine the suitability of the products for their intended use prior to purchase and shall assume all
risk and liability in connection therewith.
AVAILABILITY Thicknesses 12, 15, 20 and 25 m 0.0005, 0.0006, 0.001 and 0.002in
Standard length Available on request
STORAGE
Store in original packaging
HEALTH & SAFETY
Please refer to the product MSDS for safe handling, personal protective equipment recommendations and disposal
considerations.
DISCLAIMER: The data and information provided in this document have been obtained from carefully controlled samples and are considered to be
representative of the product described. Aerovac does not express or imply any guarantee or warranty of any kind including, but not limited to, the accuracy, the
completeness or the relevance of the data and information set out herein. Because the properties of this product can be significantly affected by the fabrication
and testing techniques employed, and since Aerovac does not control the conditions under which its products are tested and used, Aerovac cannot guarantee
the properties provided will be obtained with other processes and equipment. No guarantee or warranty is provided if the product is adapted for a s pecific use or
purpose. Aerovac declines any liability with respect to the use made by any third party of the data and information contained herein. Aerovac has the right to
change any data or information when deemed appropriate. All trademarks are the property of their respective owners. 2021 , Aerovac. All rights reserved.
by | Sep 27, 2025
TECHNICAL DATA SHEE T
VAC-PAK
A6200/A6200M & A6000
RELEASE FILM
Aerovac
955-10 National Parkway
Schaumburg, IL 60 173
USA
TDS VPK A6200/A6200M & A6000_0 2.21_Issue1
VAC-PAK
A6200/A6200M & A6000
Release film
Ideally suited to aerospace applications
Features and Benefits
High temperature, tough fluropolymer release
films with excellent release characteristics
combined with high elongation.
Suitable for use with all commonly used resin
systems.
Available perforated or non- perforated
Most commonly used in aerospace applications
and has numerous OEM approvals.
Clear blue or red for ease of identification on the
cured laminate.
Vac-Pak
A6200M has a one-sided textured finish
to meet matte surface finish requirements
PROPERTIES
Melting point 262 C 503 F
Color Clear blue and red
Film ETFE
Standard perforation patterns Contact us for full details
Tensile strength (at break) 40/70MPa 6000/10000psi
Elongation (at break) 350%
Yield 10.2m /kg 110 ft /lb/mil
The user shall determine the suitability of the products for their intended use prior to purchase and shall assume all
risk and liability in connection therewith.
AVAILABILITY Thicknesses 12, 15, 20 and 25 m 0.0005, 0.0006, 0.001 and 0.002in
Standard length Available on request
STORAGE
Store in original packaging
HEALTH & SAFETY
Please refer to the product MSDS for safe handling, personal protective equipment recommendations and disposal
considerations.
DISCLAIMER: The data and information provided in this document have been obtained from carefully controlled samples and are considered to be
representative of the product described. Aerovac does not express or imply any guarantee or warranty of any kind including, but not limited to, the accuracy, the
completeness or the relevance of the data and information set out herein. Because the properties of this product can be significantly affected by the fabrication
and testing techniques employed, and since Aerovac does not control the conditions under which its products are tested and used, Aerovac cannot guarantee
the properties provided will be obtained with other processes and equipment. No guarantee or warranty is provided if the product is adapted for a s pecific use or
purpose. Aerovac declines any liability with respect to the use made by any third party of the data and information contained herein. Aerovac has the right to
change any data or information when deemed appropriate. All trademarks are the property of their respective owners. 2021 , Aerovac. All rights reserved.
by | Sep 27, 2025
TECHNICAL DATA SHEE T
VAC-PAK
A6200/A6200M & A6000
RELEASE FILM
Aerovac
955-10 National Parkway
Schaumburg, IL 60 173
USA
TDS VPK A6200/A6200M & A6000_0 2.21_Issue1
VAC-PAK
A6200/A6200M & A6000
Release film
Ideally suited to aerospace applications
Features and Benefits
High temperature, tough fluropolymer release
films with excellent release characteristics
combined with high elongation.
Suitable for use with all commonly used resin
systems.
Available perforated or non- perforated
Most commonly used in aerospace applications
and has numerous OEM approvals.
Clear blue or red for ease of identification on the
cured laminate.
Vac-Pak
A6200M has a one-sided textured finish
to meet matte surface finish requirements
PROPERTIES
Melting point 262 C 503 F
Color Clear blue and red
Film ETFE
Standard perforation patterns Contact us for full details
Tensile strength (at break) 40/70MPa 6000/10000psi
Elongation (at break) 350%
Yield 10.2m /kg 110 ft /lb/mil
The user shall determine the suitability of the products for their intended use prior to purchase and shall assume all
risk and liability in connection therewith.
AVAILABILITY Thicknesses 12, 15, 20 and 25 m 0.0005, 0.0006, 0.001 and 0.002in
Standard length Available on request
STORAGE
Store in original packaging
HEALTH & SAFETY
Please refer to the product MSDS for safe handling, personal protective equipment recommendations and disposal
considerations.
DISCLAIMER: The data and information provided in this document have been obtained from carefully controlled samples and are considered to be
representative of the product described. Aerovac does not express or imply any guarantee or warranty of any kind including, but not limited to, the accuracy, the
completeness or the relevance of the data and information set out herein. Because the properties of this product can be significantly affected by the fabrication
and testing techniques employed, and since Aerovac does not control the conditions under which its products are tested and used, Aerovac cannot guarantee
the properties provided will be obtained with other processes and equipment. No guarantee or warranty is provided if the product is adapted for a s pecific use or
purpose. Aerovac declines any liability with respect to the use made by any third party of the data and information contained herein. Aerovac has the right to
change any data or information when deemed appropriate. All trademarks are the property of their respective owners. 2021 , Aerovac. All rights reserved.
