by | Sep 27, 2025
TECHNICAL DATA SHEE T
A5000
RELEASE FILM
Aerovac
955-10 National Parkway
Schaumburg, IL 60 173
USA
TDS A5000_02 .21_Issue1
A5000
Release film
Ideally suited to aerospace applications
Features and Benefits
High temperature fluoropolymer, which has been an
aerospace industry standard product for many years.
Exhibits excellent elongation and release properties,
and is suitable for use with all prepreg systems
including polyester, epoxy, phenolic and BMI.
Effective at overcoming bridging on the most difficult
of contoured shapes.
Most commonly used in aerospace applications with
numerous OEM approvals.
Imparts a gloss finish to molding surfaces.
Available with an etched surface on one side to aid
bonding to rubber products for use as a localized
pressure pad/intensifier.
Available perforated and non- perforated.
PROPERTIES
Maximum use temperature 260 C 500 F
Color Red, white, violet and clear
Film FEP
Standard perforation patterns Contact us for full details
Tensile strength (at break) 24MPa 3500psi
Elongation (at break) 300%
Yield 8.36 m /kg 90 ft /lb/mil
AVAILABILITY
Thicknesses 25 and 50 m 0.001 and 0.002in
Standard widths Up to 2m Up to 80in
Standard lengths Available on request
STORAGE
Store in original packaging
HEALTH & SAFETY
Please refer to the product MSDS for safe handling, personal protective equipment recommendations and disposal
considerations.
DISCLAIMER: The data and information provided in this document have been obtained from carefully controlled samples and are considered to be
representative of the product described. Aerovac does not express or imply any guarantee or warranty of any kind including, but not limited to, the accuracy, the
completeness or the relevance of the data and information set out herein. Because the properties of this product can be significantly affected by the fabrication
and testing techniques employed, and since Aerovac does not control the conditions under which its products are tested and used, Aerovac cannot guarantee
the properties provided will be obtained with other processes and equipment. No guarantee or warranty is provided if the product is adapted for a s pecific use or
purpose. Aerovac declines any liability with respect to the use made by any third party of the data and information contained herein. Aerovac has the right to
change any data or information when deemed appropriate. All trademarks are the property of their respective owners. 2021 , Aerovac. All rights reserved.
by | Sep 27, 2025
TECHNICAL DATA SHEE T
A5000
RELEASE FILM
Aerovac
955-10 National Parkway
Schaumburg, IL 60 173
USA
TDS A5000_02 .21_Issue1
A5000
Release film
Ideally suited to aerospace applications
Features and Benefits
High temperature fluoropolymer, which has been an
aerospace industry standard product for many years.
Exhibits excellent elongation and release properties,
and is suitable for use with all prepreg systems
including polyester, epoxy, phenolic and BMI.
Effective at overcoming bridging on the most difficult
of contoured shapes.
Most commonly used in aerospace applications with
numerous OEM approvals.
Imparts a gloss finish to molding surfaces.
Available with an etched surface on one side to aid
bonding to rubber products for use as a localized
pressure pad/intensifier.
Available perforated and non- perforated.
PROPERTIES
Maximum use temperature 260 C 500 F
Color Red, white, violet and clear
Film FEP
Standard perforation patterns Contact us for full details
Tensile strength (at break) 24MPa 3500psi
Elongation (at break) 300%
Yield 8.36 m /kg 90 ft /lb/mil
AVAILABILITY
Thicknesses 25 and 50 m 0.001 and 0.002in
Standard widths Up to 2m Up to 80in
Standard lengths Available on request
STORAGE
Store in original packaging
HEALTH & SAFETY
Please refer to the product MSDS for safe handling, personal protective equipment recommendations and disposal
considerations.
DISCLAIMER: The data and information provided in this document have been obtained from carefully controlled samples and are considered to be
representative of the product described. Aerovac does not express or imply any guarantee or warranty of any kind including, but not limited to, the accuracy, the
completeness or the relevance of the data and information set out herein. Because the properties of this product can be significantly affected by the fabrication
and testing techniques employed, and since Aerovac does not control the conditions under which its products are tested and used, Aerovac cannot guarantee
the properties provided will be obtained with other processes and equipment. No guarantee or warranty is provided if the product is adapted for a s pecific use or
purpose. Aerovac declines any liability with respect to the use made by any third party of the data and information contained herein. Aerovac has the right to
change any data or information when deemed appropriate. All trademarks are the property of their respective owners. 2021 , Aerovac. All rights reserved.
by | Sep 27, 2025
TECHNICAL DATA SHEE T
A5000
RELEASE FILM
Aerovac
955-10 National Parkway
Schaumburg, IL 60 173
USA
TDS A5000_02 .21_Issue1
A5000
Release film
Ideally suited to aerospace applications
Features and Benefits
High temperature fluoropolymer, which has been an
aerospace industry standard product for many years.
Exhibits excellent elongation and release properties,
and is suitable for use with all prepreg systems
including polyester, epoxy, phenolic and BMI.
Effective at overcoming bridging on the most difficult
of contoured shapes.
Most commonly used in aerospace applications with
numerous OEM approvals.
Imparts a gloss finish to molding surfaces.
Available with an etched surface on one side to aid
bonding to rubber products for use as a localized
pressure pad/intensifier.
Available perforated and non- perforated.
PROPERTIES
Maximum use temperature 260 C 500 F
Color Red, white, violet and clear
Film FEP
Standard perforation patterns Contact us for full details
Tensile strength (at break) 24MPa 3500psi
Elongation (at break) 300%
Yield 8.36 m /kg 90 ft /lb/mil
AVAILABILITY
Thicknesses 25 and 50 m 0.001 and 0.002in
Standard widths Up to 2m Up to 80in
Standard lengths Available on request
STORAGE
Store in original packaging
HEALTH & SAFETY
Please refer to the product MSDS for safe handling, personal protective equipment recommendations and disposal
considerations.
DISCLAIMER: The data and information provided in this document have been obtained from carefully controlled samples and are considered to be
representative of the product described. Aerovac does not express or imply any guarantee or warranty of any kind including, but not limited to, the accuracy, the
completeness or the relevance of the data and information set out herein. Because the properties of this product can be significantly affected by the fabrication
and testing techniques employed, and since Aerovac does not control the conditions under which its products are tested and used, Aerovac cannot guarantee
the properties provided will be obtained with other processes and equipment. No guarantee or warranty is provided if the product is adapted for a s pecific use or
purpose. Aerovac declines any liability with respect to the use made by any third party of the data and information contained herein. Aerovac has the right to
change any data or information when deemed appropriate. All trademarks are the property of their respective owners. 2021 , Aerovac. All rights reserved.
by | Sep 27, 2025
TECHNICAL DATA SHEE T
A5000
RELEASE FILM
Aerovac
955-10 National Parkway
Schaumburg, IL 60 173
USA
TDS A5000_02 .21_Issue1
A5000
Release film
Ideally suited to aerospace applications
Features and Benefits
High temperature fluoropolymer, which has been an
aerospace industry standard product for many years.
Exhibits excellent elongation and release properties,
and is suitable for use with all prepreg systems
including polyester, epoxy, phenolic and BMI.
Effective at overcoming bridging on the most difficult
of contoured shapes.
Most commonly used in aerospace applications with
numerous OEM approvals.
Imparts a gloss finish to molding surfaces.
Available with an etched surface on one side to aid
bonding to rubber products for use as a localized
pressure pad/intensifier.
Available perforated and non- perforated.
PROPERTIES
Maximum use temperature 260 C 500 F
Color Red, white, violet and clear
Film FEP
Standard perforation patterns Contact us for full details
Tensile strength (at break) 24MPa 3500psi
Elongation (at break) 300%
Yield 8.36 m /kg 90 ft /lb/mil
AVAILABILITY
Thicknesses 25 and 50 m 0.001 and 0.002in
Standard widths Up to 2m Up to 80in
Standard lengths Available on request
STORAGE
Store in original packaging
HEALTH & SAFETY
Please refer to the product MSDS for safe handling, personal protective equipment recommendations and disposal
considerations.
DISCLAIMER: The data and information provided in this document have been obtained from carefully controlled samples and are considered to be
representative of the product described. Aerovac does not express or imply any guarantee or warranty of any kind including, but not limited to, the accuracy, the
completeness or the relevance of the data and information set out herein. Because the properties of this product can be significantly affected by the fabrication
and testing techniques employed, and since Aerovac does not control the conditions under which its products are tested and used, Aerovac cannot guarantee
the properties provided will be obtained with other processes and equipment. No guarantee or warranty is provided if the product is adapted for a s pecific use or
purpose. Aerovac declines any liability with respect to the use made by any third party of the data and information contained herein. Aerovac has the right to
change any data or information when deemed appropriate. All trademarks are the property of their respective owners. 2021 , Aerovac. All rights reserved.
by | Sep 27, 2025
TECHNICAL DATA SHEE T
A5000
RELEASE FILM
Aerovac
955-10 National Parkway
Schaumburg, IL 60 173
USA
TDS A5000_02 .21_Issue1
A5000
Release film
Ideally suited to aerospace applications
Features and Benefits
High temperature fluoropolymer, which has been an
aerospace industry standard product for many years.
Exhibits excellent elongation and release properties,
and is suitable for use with all prepreg systems
including polyester, epoxy, phenolic and BMI.
Effective at overcoming bridging on the most difficult
of contoured shapes.
Most commonly used in aerospace applications with
numerous OEM approvals.
Imparts a gloss finish to molding surfaces.
Available with an etched surface on one side to aid
bonding to rubber products for use as a localized
pressure pad/intensifier.
Available perforated and non- perforated.
PROPERTIES
Maximum use temperature 260 C 500 F
Color Red, white, violet and clear
Film FEP
Standard perforation patterns Contact us for full details
Tensile strength (at break) 24MPa 3500psi
Elongation (at break) 300%
Yield 8.36 m /kg 90 ft /lb/mil
AVAILABILITY
Thicknesses 25 and 50 m 0.001 and 0.002in
Standard widths Up to 2m Up to 80in
Standard lengths Available on request
STORAGE
Store in original packaging
HEALTH & SAFETY
Please refer to the product MSDS for safe handling, personal protective equipment recommendations and disposal
considerations.
DISCLAIMER: The data and information provided in this document have been obtained from carefully controlled samples and are considered to be
representative of the product described. Aerovac does not express or imply any guarantee or warranty of any kind including, but not limited to, the accuracy, the
completeness or the relevance of the data and information set out herein. Because the properties of this product can be significantly affected by the fabrication
and testing techniques employed, and since Aerovac does not control the conditions under which its products are tested and used, Aerovac cannot guarantee
the properties provided will be obtained with other processes and equipment. No guarantee or warranty is provided if the product is adapted for a s pecific use or
purpose. Aerovac declines any liability with respect to the use made by any third party of the data and information contained herein. Aerovac has the right to
change any data or information when deemed appropriate. All trademarks are the property of their respective owners. 2021 , Aerovac. All rights reserved.
by | Sep 27, 2025
TECHNICAL DATA SHEE T
A5000
RELEASE FILM
Aerovac
955-10 National Parkway
Schaumburg, IL 60 173
USA
TDS A5000_02 .21_Issue1
A5000
Release film
Ideally suited to aerospace applications
Features and Benefits
High temperature fluoropolymer, which has been an
aerospace industry standard product for many years.
Exhibits excellent elongation and release properties,
and is suitable for use with all prepreg systems
including polyester, epoxy, phenolic and BMI.
Effective at overcoming bridging on the most difficult
of contoured shapes.
Most commonly used in aerospace applications with
numerous OEM approvals.
Imparts a gloss finish to molding surfaces.
Available with an etched surface on one side to aid
bonding to rubber products for use as a localized
pressure pad/intensifier.
Available perforated and non- perforated.
PROPERTIES
Maximum use temperature 260 C 500 F
Color Red, white, violet and clear
Film FEP
Standard perforation patterns Contact us for full details
Tensile strength (at break) 24MPa 3500psi
Elongation (at break) 300%
Yield 8.36 m /kg 90 ft /lb/mil
AVAILABILITY
Thicknesses 25 and 50 m 0.001 and 0.002in
Standard widths Up to 2m Up to 80in
Standard lengths Available on request
STORAGE
Store in original packaging
HEALTH & SAFETY
Please refer to the product MSDS for safe handling, personal protective equipment recommendations and disposal
considerations.
DISCLAIMER: The data and information provided in this document have been obtained from carefully controlled samples and are considered to be
representative of the product described. Aerovac does not express or imply any guarantee or warranty of any kind including, but not limited to, the accuracy, the
completeness or the relevance of the data and information set out herein. Because the properties of this product can be significantly affected by the fabrication
and testing techniques employed, and since Aerovac does not control the conditions under which its products are tested and used, Aerovac cannot guarantee
the properties provided will be obtained with other processes and equipment. No guarantee or warranty is provided if the product is adapted for a s pecific use or
purpose. Aerovac declines any liability with respect to the use made by any third party of the data and information contained herein. Aerovac has the right to
change any data or information when deemed appropriate. All trademarks are the property of their respective owners. 2021 , Aerovac. All rights reserved.
by | Sep 27, 2025
TECHNICAL DATA SHEE T
A5000
RELEASE FILM
Aerovac
955-10 National Parkway
Schaumburg, IL 60 173
USA
TDS A5000_02 .21_Issue1
A5000
Release film
Ideally suited to aerospace applications
Features and Benefits
High temperature fluoropolymer, which has been an
aerospace industry standard product for many years.
Exhibits excellent elongation and release properties,
and is suitable for use with all prepreg systems
including polyester, epoxy, phenolic and BMI.
Effective at overcoming bridging on the most difficult
of contoured shapes.
Most commonly used in aerospace applications with
numerous OEM approvals.
Imparts a gloss finish to molding surfaces.
Available with an etched surface on one side to aid
bonding to rubber products for use as a localized
pressure pad/intensifier.
Available perforated and non- perforated.
PROPERTIES
Maximum use temperature 260 C 500 F
Color Red, white, violet and clear
Film FEP
Standard perforation patterns Contact us for full details
Tensile strength (at break) 24MPa 3500psi
Elongation (at break) 300%
Yield 8.36 m /kg 90 ft /lb/mil
AVAILABILITY
Thicknesses 25 and 50 m 0.001 and 0.002in
Standard widths Up to 2m Up to 80in
Standard lengths Available on request
STORAGE
Store in original packaging
HEALTH & SAFETY
Please refer to the product MSDS for safe handling, personal protective equipment recommendations and disposal
considerations.
DISCLAIMER: The data and information provided in this document have been obtained from carefully controlled samples and are considered to be
representative of the product described. Aerovac does not express or imply any guarantee or warranty of any kind including, but not limited to, the accuracy, the
completeness or the relevance of the data and information set out herein. Because the properties of this product can be significantly affected by the fabrication
and testing techniques employed, and since Aerovac does not control the conditions under which its products are tested and used, Aerovac cannot guarantee
the properties provided will be obtained with other processes and equipment. No guarantee or warranty is provided if the product is adapted for a s pecific use or
purpose. Aerovac declines any liability with respect to the use made by any third party of the data and information contained herein. Aerovac has the right to
change any data or information when deemed appropriate. All trademarks are the property of their respective owners. 2021 , Aerovac. All rights reserved.
by | Sep 27, 2025
TECHNICAL DATA SHEE T
A5000
RELEASE FILM
Aerovac
955-10 National Parkway
Schaumburg, IL 60 173
USA
TDS A5000_02 .21_Issue1
A5000
Release film
Ideally suited to aerospace applications
Features and Benefits
High temperature fluoropolymer, which has been an
aerospace industry standard product for many years.
Exhibits excellent elongation and release properties,
and is suitable for use with all prepreg systems
including polyester, epoxy, phenolic and BMI.
Effective at overcoming bridging on the most difficult
of contoured shapes.
Most commonly used in aerospace applications with
numerous OEM approvals.
Imparts a gloss finish to molding surfaces.
Available with an etched surface on one side to aid
bonding to rubber products for use as a localized
pressure pad/intensifier.
Available perforated and non- perforated.
PROPERTIES
Maximum use temperature 260 C 500 F
Color Red, white, violet and clear
Film FEP
Standard perforation patterns Contact us for full details
Tensile strength (at break) 24MPa 3500psi
Elongation (at break) 300%
Yield 8.36 m /kg 90 ft /lb/mil
AVAILABILITY
Thicknesses 25 and 50 m 0.001 and 0.002in
Standard widths Up to 2m Up to 80in
Standard lengths Available on request
STORAGE
Store in original packaging
HEALTH & SAFETY
Please refer to the product MSDS for safe handling, personal protective equipment recommendations and disposal
considerations.
DISCLAIMER: The data and information provided in this document have been obtained from carefully controlled samples and are considered to be
representative of the product described. Aerovac does not express or imply any guarantee or warranty of any kind including, but not limited to, the accuracy, the
completeness or the relevance of the data and information set out herein. Because the properties of this product can be significantly affected by the fabrication
and testing techniques employed, and since Aerovac does not control the conditions under which its products are tested and used, Aerovac cannot guarantee
the properties provided will be obtained with other processes and equipment. No guarantee or warranty is provided if the product is adapted for a s pecific use or
purpose. Aerovac declines any liability with respect to the use made by any third party of the data and information contained herein. Aerovac has the right to
change any data or information when deemed appropriate. All trademarks are the property of their respective owners. 2021 , Aerovac. All rights reserved.
by | Sep 27, 2025
TECHNICAL DATA SHEE T
A5000
RELEASE FILM
Aerovac
955-10 National Parkway
Schaumburg, IL 60 173
USA
TDS A5000_02 .21_Issue1
A5000
Release film
Ideally suited to aerospace applications
Features and Benefits
High temperature fluoropolymer, which has been an
aerospace industry standard product for many years.
Exhibits excellent elongation and release properties,
and is suitable for use with all prepreg systems
including polyester, epoxy, phenolic and BMI.
Effective at overcoming bridging on the most difficult
of contoured shapes.
Most commonly used in aerospace applications with
numerous OEM approvals.
Imparts a gloss finish to molding surfaces.
Available with an etched surface on one side to aid
bonding to rubber products for use as a localized
pressure pad/intensifier.
Available perforated and non- perforated.
PROPERTIES
Maximum use temperature 260 C 500 F
Color Red, white, violet and clear
Film FEP
Standard perforation patterns Contact us for full details
Tensile strength (at break) 24MPa 3500psi
Elongation (at break) 300%
Yield 8.36 m /kg 90 ft /lb/mil
AVAILABILITY
Thicknesses 25 and 50 m 0.001 and 0.002in
Standard widths Up to 2m Up to 80in
Standard lengths Available on request
STORAGE
Store in original packaging
HEALTH & SAFETY
Please refer to the product MSDS for safe handling, personal protective equipment recommendations and disposal
considerations.
DISCLAIMER: The data and information provided in this document have been obtained from carefully controlled samples and are considered to be
representative of the product described. Aerovac does not express or imply any guarantee or warranty of any kind including, but not limited to, the accuracy, the
completeness or the relevance of the data and information set out herein. Because the properties of this product can be significantly affected by the fabrication
and testing techniques employed, and since Aerovac does not control the conditions under which its products are tested and used, Aerovac cannot guarantee
the properties provided will be obtained with other processes and equipment. No guarantee or warranty is provided if the product is adapted for a s pecific use or
purpose. Aerovac declines any liability with respect to the use made by any third party of the data and information contained herein. Aerovac has the right to
change any data or information when deemed appropriate. All trademarks are the property of their respective owners. 2021 , Aerovac. All rights reserved.
by | Sep 27, 2025
TECHNICAL DATA SHEE T
A5000
RELEASE FILM
Aerovac
955-10 National Parkway
Schaumburg, IL 60 173
USA
TDS A5000_02 .21_Issue1
A5000
Release film
Ideally suited to aerospace applications
Features and Benefits
High temperature fluoropolymer, which has been an
aerospace industry standard product for many years.
Exhibits excellent elongation and release properties,
and is suitable for use with all prepreg systems
including polyester, epoxy, phenolic and BMI.
Effective at overcoming bridging on the most difficult
of contoured shapes.
Most commonly used in aerospace applications with
numerous OEM approvals.
Imparts a gloss finish to molding surfaces.
Available with an etched surface on one side to aid
bonding to rubber products for use as a localized
pressure pad/intensifier.
Available perforated and non- perforated.
PROPERTIES
Maximum use temperature 260 C 500 F
Color Red, white, violet and clear
Film FEP
Standard perforation patterns Contact us for full details
Tensile strength (at break) 24MPa 3500psi
Elongation (at break) 300%
Yield 8.36 m /kg 90 ft /lb/mil
AVAILABILITY
Thicknesses 25 and 50 m 0.001 and 0.002in
Standard widths Up to 2m Up to 80in
Standard lengths Available on request
STORAGE
Store in original packaging
HEALTH & SAFETY
Please refer to the product MSDS for safe handling, personal protective equipment recommendations and disposal
considerations.
DISCLAIMER: The data and information provided in this document have been obtained from carefully controlled samples and are considered to be
representative of the product described. Aerovac does not express or imply any guarantee or warranty of any kind including, but not limited to, the accuracy, the
completeness or the relevance of the data and information set out herein. Because the properties of this product can be significantly affected by the fabrication
and testing techniques employed, and since Aerovac does not control the conditions under which its products are tested and used, Aerovac cannot guarantee
the properties provided will be obtained with other processes and equipment. No guarantee or warranty is provided if the product is adapted for a s pecific use or
purpose. Aerovac declines any liability with respect to the use made by any third party of the data and information contained herein. Aerovac has the right to
change any data or information when deemed appropriate. All trademarks are the property of their respective owners. 2021 , Aerovac. All rights reserved.
