08A100S-60_TDS.pdf
08A100S-2_TDS.pdf
08A100S-4_TDS.pdf
08A100-60_TDS.pdf
TECHNICAL DATA SHEE T
A100PSI
PEEL PLY
Aerovac
955-10 National Parkway
Schaumburg, IL 60 173
USA
TDS A100PSI_02.21_Issue1
A100PSI
Peel ply
Ideally suited to resin infusion applications
Features and Benefits
Porous nylon peel ply.
Heat set and scoured.
For use directly against infused laminates.
Imparts a coarse weave pattern upon removal from
the laminate.
Strips cleanly and quickly from most commercial
resin systems.
Recommended for infused composite manufacture.
Solvay does not recommend the use of woven nylon
fabrics with phenolic resin as acid in the catalyst can
break down nylon materials. Therefore, we
recommend that customers conduct their own internal
compatibility tests.
PROPERTIES
Maximum use temperature 204 C 400 F
Color White with red or blue tracer
Fabric type Nylon
Fabric weight 85g/m 2.51oz/yd
AVAILABILITY
Standard width 1.8m 71in
Standard length 100m 109yd
Slit widths available
STORAGE
No special storage conditions required.
HEALTH & SAFETY
Please refer to the product MSDS for safe handling, personal protective equipment recommendations and disposal
considerations.
DISCLAIMER: The data and information provided in this document have been obtained from carefully controlled samples and are considered to be
representative of the product described. Aerovac does not express or imply any guarantee or warranty of any kind including, but not limited to, the accuracy, the
completeness or the relevance of the data and information set out herein. Because the properties of this product can be significantly affected by the fabrication
and testing techniques employed, and since Aerovac does not control the conditions under which its products are tested and used, Aerovac cannot guarantee
the properties provided will be obtained with other processes and equipment. No guarantee or warranty is provided if the product is adapted for a s pecific use or
purpose. Aerovac declines any liability with respect to the use made by any third party of the data and information contained herein. Aerovac has the right to
change any data or information when deemed appropriate. All trademarks are the property of their respective owners. 2021 , Aerovac. All rights reserved.
0895001513M_TDS.pdf
Description:
Suggested Applications:
Technical Data:
Features / Benefits:
NCF 9500 Release Film
Related Airtech Products:
Related Airtech Products:
Distributed By:
A two sided coated release film engineered for those applications with
less demanding performance requirements.
An economical release film with good release / temperature
characteristics for a wide variety of applications.
Maximum Use Temperature: 390 F / 198 C
Thickness: .001 / .025 mm
Elongation: MD 140%
Color: Translucent
Offers easy release from most surfaces.
Dahlpad One, Tri-Pad and Si-Pad press pads
AIRTECH International, Inc., PCB Division Huntington Beach, CA, USA Luxembourg England China
714.899.8100 714.899.8179 fax www.airtechpcb.com
As the conditions or methods of use, including storage, are beyond our control, Airtech International,
Inc. does not assume any responsibility for the performance of this material for any particular use. The
mateial is sold as is . Airtech International, Inc. disclaims, and buyer waives, any and all implied
warranties, including without limitation the warranties of merchantability and of fitness for a particular
use.
PCB DIVISION
088171PS3_TDS.pdf
Cytec 1 of 1 Vac-Pak HS8171PS
Process Materials Adhesive tape
DELIVERING TECHNOLOGY BEYOND OUR CUSTOMERS IMAGINATION
Aerospace Materials | Industrial Materials | Process Materials
21 March 2013
Vac-Pak HS8171PS
Adhesive tape
Ideally suited to masking applications
Features
High temperature nylon tape with a pressure
sensitive, rubber-base adhesive on one side.
Designed to strip cleanly from the part during masking
operations in high temperature/pressure applications.
High elongation properties provide a high degree of
conformability.
Rubber based adhesive allows for use on parts where
subsequent painting or bonding is necessary.
High stretch and thinness offer excellent
conformability and clean, sharp edges.
Properties
Maximum cure temperature 204 C 400 F
Colour Green
Adhesive Rubber
Carrier Nylon
Total thickness 88 m 0.0035in
Adhesive thickness 38 m 0.0015in
Tape thickness 50 m 0.002in
Elongation at break 500%
Availability
Standard width 19.05, 25.4, 50.8 and 76.2mm , 1, 2 and 3in
Standard length 65.8m 72yd
Storage
No special storage conditions.
Health & safety
Handling of these products must conform to individual company guidelines and health and safety regulations.
All statements, technical information and recommendations contained in this data sheet are given in good faith and are based on tests believed to be reliable, but their accuracy and completeness are not guaranteed. They
do not constitute an offer to any person and shall not be deemed to form the basis of any subsequent contract. All products are sold subject to the Cytec s Standard Terms and conditions of Sale. Accordingly, the user shall
determine the suitability of the products for their intended use prior to purchase and shall assume all risk and liability in connection therewith. It is the responsibility of those wishing to sell items made from or embodying
the products to inform the user of the properties of the products and the purposes for which they may be suitable, together with all precautionary measures required in handling those products. The information contained
herein is under constant review and liable to be modified from time to time.
Copyright 2012 Cytec Process Materials (Keighley) Ltd, Cytec Process Materials (CA) Inc, Cytec Process Materials (Toulouse) Sarl, Cytec Process Materials (Milan) Srl. All rights reserved worldwide. All trademarks or
registered trademarks are the property of their respective owners.
088171PS2_TDS.pdf
Cytec 1 of 1 Vac-Pak HS8171PS
Process Materials Adhesive tape
DELIVERING TECHNOLOGY BEYOND OUR CUSTOMERS IMAGINATION
Aerospace Materials | Industrial Materials | Process Materials
21 March 2013
Vac-Pak HS8171PS
Adhesive tape
Ideally suited to masking applications
Features
High temperature nylon tape with a pressure
sensitive, rubber-base adhesive on one side.
Designed to strip cleanly from the part during masking
operations in high temperature/pressure applications.
High elongation properties provide a high degree of
conformability.
Rubber based adhesive allows for use on parts where
subsequent painting or bonding is necessary.
High stretch and thinness offer excellent
conformability and clean, sharp edges.
Properties
Maximum cure temperature 204 C 400 F
Colour Green
Adhesive Rubber
Carrier Nylon
Total thickness 88 m 0.0035in
Adhesive thickness 38 m 0.0015in
Tape thickness 50 m 0.002in
Elongation at break 500%
Availability
Standard width 19.05, 25.4, 50.8 and 76.2mm , 1, 2 and 3in
Standard length 65.8m 72yd
Storage
No special storage conditions.
Health & safety
Handling of these products must conform to individual company guidelines and health and safety regulations.
All statements, technical information and recommendations contained in this data sheet are given in good faith and are based on tests believed to be reliable, but their accuracy and completeness are not guaranteed. They
do not constitute an offer to any person and shall not be deemed to form the basis of any subsequent contract. All products are sold subject to the Cytec s Standard Terms and conditions of Sale. Accordingly, the user shall
determine the suitability of the products for their intended use prior to purchase and shall assume all risk and liability in connection therewith. It is the responsibility of those wishing to sell items made from or embodying
the products to inform the user of the properties of the products and the purposes for which they may be suitable, together with all precautionary measures required in handling those products. The information contained
herein is under constant review and liable to be modified from time to time.
Copyright 2012 Cytec Process Materials (Keighley) Ltd, Cytec Process Materials (CA) Inc, Cytec Process Materials (Toulouse) Sarl, Cytec Process Materials (Milan) Srl. All rights reserved worldwide. All trademarks or
registered trademarks are the property of their respective owners.
088171PS1_TDS.pdf
Cytec 1 of 1 Vac-Pak HS8171PS
Process Materials Adhesive tape
DELIVERING TECHNOLOGY BEYOND OUR CUSTOMERS IMAGINATION
Aerospace Materials | Industrial Materials | Process Materials
21 March 2013
Vac-Pak HS8171PS
Adhesive tape
Ideally suited to masking applications
Features
High temperature nylon tape with a pressure
sensitive, rubber-base adhesive on one side.
Designed to strip cleanly from the part during masking
operations in high temperature/pressure applications.
High elongation properties provide a high degree of
conformability.
Rubber based adhesive allows for use on parts where
subsequent painting or bonding is necessary.
High stretch and thinness offer excellent
conformability and clean, sharp edges.
Properties
Maximum cure temperature 204 C 400 F
Colour Green
Adhesive Rubber
Carrier Nylon
Total thickness 88 m 0.0035in
Adhesive thickness 38 m 0.0015in
Tape thickness 50 m 0.002in
Elongation at break 500%
Availability
Standard width 19.05, 25.4, 50.8 and 76.2mm , 1, 2 and 3in
Standard length 65.8m 72yd
Storage
No special storage conditions.
Health & safety
Handling of these products must conform to individual company guidelines and health and safety regulations.
All statements, technical information and recommendations contained in this data sheet are given in good faith and are based on tests believed to be reliable, but their accuracy and completeness are not guaranteed. They
do not constitute an offer to any person and shall not be deemed to form the basis of any subsequent contract. All products are sold subject to the Cytec s Standard Terms and conditions of Sale. Accordingly, the user shall
determine the suitability of the products for their intended use prior to purchase and shall assume all risk and liability in connection therewith. It is the responsibility of those wishing to sell items made from or embodying
the products to inform the user of the properties of the products and the purposes for which they may be suitable, together with all precautionary measures required in handling those products. The information contained
herein is under constant review and liable to be modified from time to time.
Copyright 2012 Cytec Process Materials (Keighley) Ltd, Cytec Process Materials (CA) Inc, Cytec Process Materials (Toulouse) Sarl, Cytec Process Materials (Milan) Srl. All rights reserved worldwide. All trademarks or
registered trademarks are the property of their respective owners.
088171554_TDS.pdf
TECHNICAL DATA SHEE T
VAC-PAK
HS8171
VACUUM BAGGING FILM
Aerovac
955-10 National Parkway
Schaumburg, IL 60 173
USA
TDS VBHS8171_02.21_Issue1
VAC-PAK
HS8171
Vacuum bagging film
Ideally suited to aerospace applications
Features and Benefits
A clear green, heat stabilized blown nylon 6 film.
Excellent tensile strength and heat ageing
properties, having been successfully used at
pressures of 100PSI (6.9bar) and temperatures of up
to 204 C (400 F).
Approved on various aerospace specifications.
PROPERTIES
Maximum use temperature 204 C 400 F
Color Clear green
Tensile strength at break (ASTM D882) 96MPa 14000PSI
Elongation at break (ASTM D882) 415%
Yield
50 m: 17.30m /kg
75 m: 11.60m /kg
9.39yd /lb
6.3yd /lb
AVAILABILITY
Thickness 50 and 75 m 0.002 and 0.003in
Roll weight Up to 45kg Up to 100lbs
Widths Up to 4.06m (open) Up to 460in (open)
Formats available Tube, sheet, V sheet
STORAGE
Vac-Pak HS8171 is a hydrophilic material. Moisture and water act as plasticizers. The level of moisture content at time of
use is therefore an important factor for successful performance. All nylon films absorb water. The higher the moisture
content the more flexible they become. Conversely at lower moisture levels flexibility is limited.
Do not store rolls vertically on their ends.
HEALTH & SAFETY
Please refer to the product MSDS for safe handling, personal protective equipment recommendations and disposal
considerations.
DISCLAIMER: The data and information provided in this document have been obtained from carefully controlled samples and are considered to be
representative of the product described. Aerovac does not express or imply any guarantee or warranty of any kind including, but not limited to, the accuracy, the
completeness or the relevance of the data and information set out herein. Because the properties of this product can be significantly affected by the fabrication
and testing techniques employed, and since Aerovac does not control the conditions under which its products are tested and used, Aerovac cannot guarantee
the properties provided will be obtained with other processes and equipment. No guarantee or warranty is provided if the product is adapted for a s pecific use or
purpose. Aerovac declines any liability with respect to the use made by any third party of the data and information contained herein. Aerovac has the right to
change any data or information when deemed appropriate. All trademarks are the property of their respective owners. 2021 , Aerovac. All rights reserved.