by | Sep 27, 2025
Safety information sheet
Voluntary product information following the Safety Data Sheet format
Bagging Films
Material number 1025
Revision date: 10/5/2023
Version: 7.6
Replaces version: 7.5
Language: en-US
Date of first version:10/21/2014
Page: 1 of 8
1. Product and company identification
Product identifier
Trade name: Bagging Films
NBF125C, Big Blue L-100, Securlon V-45, Securlon L-500Y, Securlon L-1000,
Securlon L-2000, Securlon L2000 Embossed, Stretchlon 200, Stretchlon 700,
Stretchlon 800, Stretchlon 850, Stretchlon HT-350, Ipplon KM1300, Ipplon
DP1000, Ipplon DPT1000, Ipplon WN1500, Wrightlon 600V, Wrightlon 5400,
Wrightlon 7400, Wrightlon 8400, Dahlar Release Bag 125, Dahlar Release Bag
375R, Dahlar Release Bag 460, Dahlar Release Bag 500, Econolon, Airdraw 2,
Airdraw 2-DC, Thermalimide, Thermaflex
Relevant identified uses of the substance or mixture and uses advised against
General use: Article: Vacuum bagging film
Details of the supplier of the safety data sheet
Company name:
Airtech International, Inc.
5700 Skylab Road
Huntington Beach, CA 92647
E-mail: airtech@airtechintl.com
Website: www.airtechonline.com
Telephone: +1 714.899.8100
Department responsible for
information:
Telephone: +1 714.899.8100
E-mail: airtech@airtechintl.com
Airtech Europe Sarl
Zone industrielle Haneboesch
L 4562 Differdange
Luxembourg
Website: www.airtech.lu
Telephone: +352 582.282
Department responsible for information:
Telephone: +352 582.282
E-mail: sales@airtech.lu
Airtech Advanced Materials UK Ltd.
The Causeway
Broadway Business Park
Chadderton, Oldham
OL9 9XD United Kingdom
Website: www.airtech-amg.co.uk
Telephone: +44 161.947.1610
Department responsible for
information:
Telephone: +44 161.947.1610
E-mail: sales@airtech-amg.co.uk
Airtech Asia Ltd.
No. 161 of Anyuan Rd
Chagugang County
Wuqing District
301721, Tianjin, P.R. China
Website: www.airtech.asia
Telephone: +86 22 8862 9800
Telefax:: +86 22 8862 9900
Department responsible for information:
Telephone: +86 22 8862 9800
E-mail: airtech.asia@airtechasia.com.cn
Emergency phone number
CHEMTREC EMERGENCY PHONE:
Within USA/Canada: 1-(800)424-9300
International: +1 703-741-5970
Article not subject to hazard labelling or classification.
not applicable
printed by Airtech Advanced Materials Group with Qualisys SUMDAT
Safety information sheet
Voluntary product information following the Safety Data Sheet format
Bagging Films
Material number 1025
Revision date: 10/5/2023
Version: 7.6
Replaces version: 7.5
Language: en-US
Date of first version:10/21/2014
Page: 2 of 8
Other hazards
Toxic fumes may be emitted at elevated temperatures. Do not breathe vapor. Processing,
e.g. by cutting, sawing or grinding, can produce particles and dust. Avoid inhalation of
dusts, as even inert dusts may functionally affect respiratory organs.
Endocrine disrupting properties, Results of PBT and vPvB assessment:
No data available
2. Composition / Information on ingredients
Chemical characterization:Thermoplastic films
3. First aid measures
In case of inhalation:In case of inhalation of decomposition products, affected person should be moved into
fresh air and kept still. If the casualty has difficulty breathing, call a doctor immediately.
Following skin contact:After contact with molten product, cool skin area rapidly with cold water. Do not peel
solidified product off the skin. Seek medical attention.
After eye contact: In the event of irritation from processing vapors: Immediately flush eyes with plenty of
flowing water for 10 to 15 minutes holding eyelids apart. In case of troubles or persistent
symptoms, consult an opthalmologist.
After swallowing: Not a probable route of exposure.
In the case of the formation of dust: Rinse mouth. Seek medical treatment in case of
troubles.
4.2 Most important symptoms/effects, acute and delayed
In case of inhalation:
Inhalation of dust may cause irritation of the respiratory system. Overheating released
mist or vapors can irritate the respiratory tracts.
Other symptoms: Cough, respiratory complaints, dizziness, nausea, vomiting.
After contact with skin: The melted product can cause severe burns.
After eye contact:
Process vapors can irritate the eyes. Dust contact with the eyes can lead to mechanical
irritation.
4.3 Indication of any immediate medical attention and special treatment needed
Treat symptomatically.
Suitable extinguishing media:
Water spray jet, dry chemical powder, foam, carbon dioxide
Extinguishing media which must not be used for safety reasons:
Full water jet.
Specific hazards arising from the chemical
This material is combustible, but will not ignite readily. Toxic fumes may be emitted at
elevated temperatures.
In case of fire may be liberated: Caprolactam, nitrogen oxides (NOx), amines, carbon
monoxide and carbon dioxide, hydrogen cyanide, isocyanates, isocyanic acid.
Protective equipment and precautions for firefighters:
Wear a self-contained breathing apparatus and chemical protective clothing.
printed by Airtech Advanced Materials Group with Qualisys SUMDAT
Safety information sheet
Voluntary product information following the Safety Data Sheet format
Bagging Films
Material number 1025
Revision date: 10/5/2023
Version: 7.6
Replaces version: 7.5
Language: en-US
Date of first version:10/21/2014
Page: 3 of 8
Additional information:Seal off endangered area. Cool endangered containers with water spray and, if possible,
remove from danger zone. Use water spray jet to knock down vapors. Do not breathe
fumes. Do not allow fire water to penetrate into surface or ground water.
SECTION 6: Accidental release measures
6.1 Personal precautions, protective equipment and emergency procedures
Handle in accordance with good industrial hygiene and safety practice.
At processing: Avoid the formation of aerosol/vapors. Avoid generation of dust. Avoid
inhalation and contact with skin and eyes. Wear appropriate protective equipment. Keep
unprotected people away. Ensure adequate ventilation, especially in confined areas.
6.2 Environmental precautions
Do not allow to penetrate into soil, waterbodies or drains.
6.3 Methods and material for containment and cleaning up
Take up mechanically, placing in appropriate containers for disposal. Dispose of waste
according to applicable legislation.
6.4 Reference to other sections
Refer additionally to section 8 and 13.
SECTION 7: Handling and storage
7.1 Precautions for safe handling
Advices on safe handling:Handle in accordance with good industrial hygiene and safety practice.
At processing: Provide adequate ventilation, and local exhaust as needed. Avoid the
formation of aerosol/vapors. Avoid generation of dust. Avoid inhalation and contact with
skin and eyes. Wear appropriate protective equipment. Keep unprotected people away.
When using do not eat, drink or smoke.
Precautions against fire and explosion:
Take standard precautions to prevent fire.
Storage
Requirements for storerooms and containers:
Keep in a cool place. Keep container dry. Protect from direct sunlight. Keep away from
incompatible materials. Store at room temperature.
Hints on joint storage:Incompatible materials: Strong bases, strong acids, strong oxidizing agents.
Keep away from food and drinks.
printed by Airtech Advanced Materials Group with Qualisys SUMDAT
Safety information sheet
Voluntary product information following the Safety Data Sheet format
Bagging Films
Material number 1025
Revision date: 10/5/2023
Version: 7.6
Replaces version: 7.5
Language: en-US
Date of first version:10/21/2014
Page: 4 of 8
6. Exposure controls / personal protection
Exposure guidelines
Occupational exposure limit values:
Type Limit value
USA: ACGIH: TWA 10 mg/m (Dust limit value, inhalable fraction)
USA: ACGIH: TWA 3 mg/m (Dust limit value, respirable fraction)
USA: OSHA: TWA 15 mg/m (Dust limit value, total dust)
USA: OSHA: TWA 5 mg/m (Dust limit value, respirable fraction)
Engineering controls
Provide good ventilation and/or an exhaust system in the work area.
In case of development of vapors or dust (at processing): Use local exhaust.
See also information in chapter 7, section storage.
Respiratory protection:Respiratory protection is not necessary if room is well ventilated.
At processing:
When vapors form, use respiratory protection. The filter class must be suitable for the
maximum contaminant concentration (gas/vapor/aerosol/particulates) that may arise
when handling the product. If the concentration is exceeded, self-contained breathing
apparatus must be used.
Recommendation:
Protective gloves according to OSHA Standard – 29 CFR: 1910.138.
Glove material: nitrile rubber (0.11 mm)
Breakthrough time: 480 min.
Observe glove manufacturer’s instructions concerning penetrability and breakthrough time.
Personal protection equipment (PPE)
Eye/face protection:At processing (recommended): Safety glasses in accordance with OSHA 29 CFR:
1910.133 or ANSI Z87.1-2010.
Skin protection: At processing (recommended): Wear suitable protective clothing.
General hygiene considerations:
Handle in accordance with good industrial hygiene and safety practice. Wash hands
before breaks and after work. When using do not eat, drink or smoke.
At processing:
Avoid contact with skin, eyes, and clothing. Do not breathe vapors. Do not breathe dust.
Environmental exposure controls
Refer to 6.: Section “Environmental precautions”.
7. Physical and chemical properties
Information on basic physical and chemical properties
Appearance: Form: solid
Color: varying
Odor: odorless
Odor threshold: No data available
pH: No data available
printed by Airtech Advanced Materials Group with Qualisys SUMDAT
Safety information sheet
Voluntary product information following the Safety Data Sheet format
Bagging Films
Material number 1025
Revision date: 10/5/2023
Version: 7.6
Replaces version: 7.5
Language: en-US
Date of first version:10/21/2014
Page: 5 of 8
Melting point/freezing point: No data available
Initial boiling point and boiling range:No data available
Flash point/flash point range: No data available
Flammability: This material is combustible, but will not ignite readily.
Upper/lower flammability or explosive limits:No data available
Vapor pressure: No data available
Vapor density: No data available
Density: No data available
Water solubility: at 68 F: insoluble
Partition coefficient: n-octanol/water:No data available
Auto-ignition temperature: No data available
Thermal decomposition: No data available
Auto-ignition temperature: No data available
Additional information: No data available
SECTION 10: Stability and reactivity
10.1 Reactivity
Refer to section: Possibility of hazardous reactions.
Chemical stability: Stable under recommended storage conditions.
Possibility of hazardous reactions:
No dangerous reactions with proper and specified storage and handling
Conditions to avoid:Keep away from heat. Protect from direct sunlight. Avoid generation of dust. Avoid the
formation of aerosol/vapors.
Incompatible materials:Strong bases, strong acids, strong oxidizing agents.
Hazardous decomposition products:
Caprolactam, nitrogen oxides (NOx), amines, carbon monoxide and carbon dioxide,
hydrogen cyanide, isocyanates, isocyanic acid.
Thermal decomposition:No data available
printed by Airtech Advanced Materials Group with Qualisys SUMDAT
Safety information sheet
Voluntary product information following the Safety Data Sheet format
Bagging Films
Material number 1025
Revision date: 10/5/2023
Version: 7.6
Replaces version: 7.5
Language: en-US
Date of first version:10/21/2014
Page: 6 of 8
9. Toxicological information
Toxicological tests
Toxicological effects:The statements are derived from the properties of the single components. No toxicological
data is available for the product as such.
Acute toxicity (oral): Lack of data.
Acute toxicity (dermal): Lack of data.
Acute toxicity (inhalative): Lack of data.
Skin corrosion/irritation: Lack of data.
Serious eye damage/irritation: Lack of data.
Sensitisation to the respiratory tract: Lack of data.
Skin sensitisation: Lack of data.
Germ cell mutagenicity/Genotoxicity: Lack of data.
Carcinogenicity: Lack of data.
Reproductive toxicity: Lack of data.
Effects on or via lactation: Lack of data.
Specific target organ toxicity (single exposure): Lack of data.
Specific target organ toxicity (repeated exposure): Lack of data.
Aspiration hazard: Lack of data.
Other information: Toxic fumes may be emitted at elevated temperatures. Processing, e.g. by cutting,
sawing or grinding, can produce particles and dust. Dust may irritate airways and cause
bronchitis symptoms.
Information about Caprolactam: Harmful if swallowed. Harmful if inhaled. Causes skin
irritation. Causes serious eye irritation. May cause respiratory irritation.
Symptoms
In case of inhalation:
Inhalation of dust may cause irritation of the respiratory system. Overheating released
mist or vapors can irritate the respiratory tracts.
Other symptoms: Cough, respiratory complaints, dizziness, nausea, vomiting.
After contact with skin: The melted product can cause severe burns.
After eye contact:
Process vapors can irritate the eyes. Dust contact with the eyes can lead to mechanical
irritation.
10. Ecological information
Ecotoxicity
Further details: No data available
Persistence and degradability
Further details: Product is not biodegradable.
Bioaccumulative potential
Partition coefficient: n-octanol/water:
No data available
printed by Airtech Advanced Materials Group with Qualisys SUMDAT
Safety information sheet
Voluntary product information following the Safety Data Sheet format
Bagging Films
Material number 1025
Revision date: 10/5/2023
Version: 7.6
Replaces version: 7.5
Language: en-US
Date of first version:10/21/2014
Page: 7 of 8
Mobility in soil
No data available
Results of PBT and vPvB assessment
No data available
Additional ecological information
General information:Avoid release to the environment.
11. Disposal considerations
Product
Recommendation: Dispose of waste according to applicable legislation. Recycling or special waste
incineration.
Package
Recommendation: Dispose of waste according to applicable legislation. Non-contaminated packages may be
recycled.
12. Transport information
UN number
ADR/RID, IMDG, IATA-DGR:
not applicable
UN proper shipping name
ADR/RID, IMDG, IATA-DGR:
Not restricted
Transport hazard class(es)
ADR/RID, IMDG, IATA-DGR:
not applicable
Packing group
ADR/RID, IMDG, IATA-DGR:
not applicable
Environmental hazards
Marine pollutant: no
14.6 Special precautions for user
USA: Department of Transportation (DOT)
Proper shipping name: Not restricted
Sea transport (IMDG)
Proper shipping name:: Not restricted
Marine pollutant: no
printed by Airtech Advanced Materials Group with Qualisys SUMDAT
Safety information sheet
Voluntary product information following the Safety Data Sheet format
Bagging Films
Material number 1025
Revision date: 10/5/2023
Version: 7.6
Replaces version: 7.5
Language: en-US
Date of first version:10/21/2014
Page: 8 of 8
Air transport (IATA)
Proper shipping name:: Not restricted
Further information
No dangerous good in sense of these transport regulations.
Transport in bulk according to Annex II of MARPOL 73/78 and the IBC Code
No data available
National regulations – U.S. Federal Regulations
This product is an article as defined by TSCA regulations, and is exempt from TSCA
inventory listing requirements.
National regulations – U.S. State Regulations
No data available
National regulations – Great Britain
Hazchem-Code: –
Further regulations, limitations and legal requirements
For this mixture a chemical safety assessment is not required.
13. Other information
Abbreviations and acronyms:
ADN: European Agreement concerning the International Carriage of Dangerous Goods by Inland Waterways
ADR: European Agreement concerning the International Carriage of Dangerous Goods by Road
CAS: Chemical Abstracts Service
CFR: Code of Federal Regulations
CLP: Classification, Labelling and Packaging
DMEL: Derived minimal effect level
DNEL: Derived no-effect level
EC: European Community
EN: European Standard
EQ: Excepted quantities
IATA: International Air Transport Association
IATA-DGR: International Air Transport Association Dangerous Goods Regulations
IBC Code: International Code for the Construction and Equipment of Ships carrying Dangerous Chemicals in Bulk
IMDG Code: International Maritime Dangerous Goods Code
MARPOL: Maritime Pollution: The International Convention for the Prevention of Pollution from Ships
OSHA: Occupational Safety and Health Administration
PBT: Persistent, bioaccumulative and toxic
PNEC: Predicted no-effect concentration
RID: Regulations Concerning the International Carriage of Dangerous Goods by Rail
TRGS: Technical Rules for Hazardous Substances
TSCA: Toxic Substance Control Act
vPvB: Very persistent and very bioaccumulative
Reason of change: Changes in section 1: Changes of product list
Department issuing data sheet
Contact person: see section 1: Department responsible for information
This data sheet cannot cover all possible situations which the user may experience during processing. Each aspect of your operation should be
examined to determine if, and which additional precautions may be necessary. All health and safety information contained in this data sheet should be
provided to your employees and customers. It is your responsibility to develop appropriate workplace instructions and training programs for employees.
As the conditions and methods of use are beyond our control, we do not assume any responsibility and expressly disclaim any liability for any use of
this product. The information supplied on this safety data sheet complies with our current level of knowledge as well as with national and EU
regulations. All statements or suggestions are made without warranty, expressed or implied, regarding accuracy of information, the hazards connected
with the use of the product or the results to be obtained from the use thereof.
printed by Airtech Advanced Materials Group with Qualisys SUMDAT
by | Sep 27, 2025
Safety information sheet
Voluntary product information following the Safety Data Sheet format
Bagging Films
Material number 1025
Revision date: 10/5/2023
Version: 7.6
Replaces version: 7.5
Language: en-US
Date of first version:10/21/2014
Page: 1 of 8
1. Product and company identification
Product identifier
Trade name: Bagging Films
NBF125C, Big Blue L-100, Securlon V-45, Securlon L-500Y, Securlon L-1000,
Securlon L-2000, Securlon L2000 Embossed, Stretchlon 200, Stretchlon 700,
Stretchlon 800, Stretchlon 850, Stretchlon HT-350, Ipplon KM1300, Ipplon
DP1000, Ipplon DPT1000, Ipplon WN1500, Wrightlon 600V, Wrightlon 5400,
Wrightlon 7400, Wrightlon 8400, Dahlar Release Bag 125, Dahlar Release Bag
375R, Dahlar Release Bag 460, Dahlar Release Bag 500, Econolon, Airdraw 2,
Airdraw 2-DC, Thermalimide, Thermaflex
Relevant identified uses of the substance or mixture and uses advised against
General use: Article: Vacuum bagging film
Details of the supplier of the safety data sheet
Company name:
Airtech International, Inc.
5700 Skylab Road
Huntington Beach, CA 92647
E-mail: airtech@airtechintl.com
Website: www.airtechonline.com
Telephone: +1 714.899.8100
Department responsible for
information:
Telephone: +1 714.899.8100
E-mail: airtech@airtechintl.com
Airtech Europe Sarl
Zone industrielle Haneboesch
L 4562 Differdange
Luxembourg
Website: www.airtech.lu
Telephone: +352 582.282
Department responsible for information:
Telephone: +352 582.282
E-mail: sales@airtech.lu
Airtech Advanced Materials UK Ltd.
The Causeway
Broadway Business Park
Chadderton, Oldham
OL9 9XD United Kingdom
Website: www.airtech-amg.co.uk
Telephone: +44 161.947.1610
Department responsible for
information:
Telephone: +44 161.947.1610
E-mail: sales@airtech-amg.co.uk
Airtech Asia Ltd.
No. 161 of Anyuan Rd
Chagugang County
Wuqing District
301721, Tianjin, P.R. China
Website: www.airtech.asia
Telephone: +86 22 8862 9800
Telefax:: +86 22 8862 9900
Department responsible for information:
Telephone: +86 22 8862 9800
E-mail: airtech.asia@airtechasia.com.cn
Emergency phone number
CHEMTREC EMERGENCY PHONE:
Within USA/Canada: 1-(800)424-9300
International: +1 703-741-5970
Article not subject to hazard labelling or classification.
not applicable
printed by Airtech Advanced Materials Group with Qualisys SUMDAT
Safety information sheet
Voluntary product information following the Safety Data Sheet format
Bagging Films
Material number 1025
Revision date: 10/5/2023
Version: 7.6
Replaces version: 7.5
Language: en-US
Date of first version:10/21/2014
Page: 2 of 8
Other hazards
Toxic fumes may be emitted at elevated temperatures. Do not breathe vapor. Processing,
e.g. by cutting, sawing or grinding, can produce particles and dust. Avoid inhalation of
dusts, as even inert dusts may functionally affect respiratory organs.
Endocrine disrupting properties, Results of PBT and vPvB assessment:
No data available
2. Composition / Information on ingredients
Chemical characterization:Thermoplastic films
3. First aid measures
In case of inhalation:In case of inhalation of decomposition products, affected person should be moved into
fresh air and kept still. If the casualty has difficulty breathing, call a doctor immediately.
Following skin contact:After contact with molten product, cool skin area rapidly with cold water. Do not peel
solidified product off the skin. Seek medical attention.
After eye contact: In the event of irritation from processing vapors: Immediately flush eyes with plenty of
flowing water for 10 to 15 minutes holding eyelids apart. In case of troubles or persistent
symptoms, consult an opthalmologist.
After swallowing: Not a probable route of exposure.
In the case of the formation of dust: Rinse mouth. Seek medical treatment in case of
troubles.
4.2 Most important symptoms/effects, acute and delayed
In case of inhalation:
Inhalation of dust may cause irritation of the respiratory system. Overheating released
mist or vapors can irritate the respiratory tracts.
Other symptoms: Cough, respiratory complaints, dizziness, nausea, vomiting.
After contact with skin: The melted product can cause severe burns.
After eye contact:
Process vapors can irritate the eyes. Dust contact with the eyes can lead to mechanical
irritation.
4.3 Indication of any immediate medical attention and special treatment needed
Treat symptomatically.
Suitable extinguishing media:
Water spray jet, dry chemical powder, foam, carbon dioxide
Extinguishing media which must not be used for safety reasons:
Full water jet.
Specific hazards arising from the chemical
This material is combustible, but will not ignite readily. Toxic fumes may be emitted at
elevated temperatures.
In case of fire may be liberated: Caprolactam, nitrogen oxides (NOx), amines, carbon
monoxide and carbon dioxide, hydrogen cyanide, isocyanates, isocyanic acid.
Protective equipment and precautions for firefighters:
Wear a self-contained breathing apparatus and chemical protective clothing.
printed by Airtech Advanced Materials Group with Qualisys SUMDAT
Safety information sheet
Voluntary product information following the Safety Data Sheet format
Bagging Films
Material number 1025
Revision date: 10/5/2023
Version: 7.6
Replaces version: 7.5
Language: en-US
Date of first version:10/21/2014
Page: 3 of 8
Additional information:Seal off endangered area. Cool endangered containers with water spray and, if possible,
remove from danger zone. Use water spray jet to knock down vapors. Do not breathe
fumes. Do not allow fire water to penetrate into surface or ground water.
SECTION 6: Accidental release measures
6.1 Personal precautions, protective equipment and emergency procedures
Handle in accordance with good industrial hygiene and safety practice.
At processing: Avoid the formation of aerosol/vapors. Avoid generation of dust. Avoid
inhalation and contact with skin and eyes. Wear appropriate protective equipment. Keep
unprotected people away. Ensure adequate ventilation, especially in confined areas.
6.2 Environmental precautions
Do not allow to penetrate into soil, waterbodies or drains.
6.3 Methods and material for containment and cleaning up
Take up mechanically, placing in appropriate containers for disposal. Dispose of waste
according to applicable legislation.
6.4 Reference to other sections
Refer additionally to section 8 and 13.
SECTION 7: Handling and storage
7.1 Precautions for safe handling
Advices on safe handling:Handle in accordance with good industrial hygiene and safety practice.
At processing: Provide adequate ventilation, and local exhaust as needed. Avoid the
formation of aerosol/vapors. Avoid generation of dust. Avoid inhalation and contact with
skin and eyes. Wear appropriate protective equipment. Keep unprotected people away.
When using do not eat, drink or smoke.
Precautions against fire and explosion:
Take standard precautions to prevent fire.
Storage
Requirements for storerooms and containers:
Keep in a cool place. Keep container dry. Protect from direct sunlight. Keep away from
incompatible materials. Store at room temperature.
Hints on joint storage:Incompatible materials: Strong bases, strong acids, strong oxidizing agents.
Keep away from food and drinks.
printed by Airtech Advanced Materials Group with Qualisys SUMDAT
Safety information sheet
Voluntary product information following the Safety Data Sheet format
Bagging Films
Material number 1025
Revision date: 10/5/2023
Version: 7.6
Replaces version: 7.5
Language: en-US
Date of first version:10/21/2014
Page: 4 of 8
6. Exposure controls / personal protection
Exposure guidelines
Occupational exposure limit values:
Type Limit value
USA: ACGIH: TWA 10 mg/m (Dust limit value, inhalable fraction)
USA: ACGIH: TWA 3 mg/m (Dust limit value, respirable fraction)
USA: OSHA: TWA 15 mg/m (Dust limit value, total dust)
USA: OSHA: TWA 5 mg/m (Dust limit value, respirable fraction)
Engineering controls
Provide good ventilation and/or an exhaust system in the work area.
In case of development of vapors or dust (at processing): Use local exhaust.
See also information in chapter 7, section storage.
Respiratory protection:Respiratory protection is not necessary if room is well ventilated.
At processing:
When vapors form, use respiratory protection. The filter class must be suitable for the
maximum contaminant concentration (gas/vapor/aerosol/particulates) that may arise
when handling the product. If the concentration is exceeded, self-contained breathing
apparatus must be used.
Recommendation:
Protective gloves according to OSHA Standard – 29 CFR: 1910.138.
Glove material: nitrile rubber (0.11 mm)
Breakthrough time: 480 min.
Observe glove manufacturer’s instructions concerning penetrability and breakthrough time.
Personal protection equipment (PPE)
Eye/face protection:At processing (recommended): Safety glasses in accordance with OSHA 29 CFR:
1910.133 or ANSI Z87.1-2010.
Skin protection: At processing (recommended): Wear suitable protective clothing.
General hygiene considerations:
Handle in accordance with good industrial hygiene and safety practice. Wash hands
before breaks and after work. When using do not eat, drink or smoke.
At processing:
Avoid contact with skin, eyes, and clothing. Do not breathe vapors. Do not breathe dust.
Environmental exposure controls
Refer to 6.: Section “Environmental precautions”.
7. Physical and chemical properties
Information on basic physical and chemical properties
Appearance: Form: solid
Color: varying
Odor: odorless
Odor threshold: No data available
pH: No data available
printed by Airtech Advanced Materials Group with Qualisys SUMDAT
Safety information sheet
Voluntary product information following the Safety Data Sheet format
Bagging Films
Material number 1025
Revision date: 10/5/2023
Version: 7.6
Replaces version: 7.5
Language: en-US
Date of first version:10/21/2014
Page: 5 of 8
Melting point/freezing point: No data available
Initial boiling point and boiling range:No data available
Flash point/flash point range: No data available
Flammability: This material is combustible, but will not ignite readily.
Upper/lower flammability or explosive limits:No data available
Vapor pressure: No data available
Vapor density: No data available
Density: No data available
Water solubility: at 68 F: insoluble
Partition coefficient: n-octanol/water:No data available
Auto-ignition temperature: No data available
Thermal decomposition: No data available
Auto-ignition temperature: No data available
Additional information: No data available
SECTION 10: Stability and reactivity
10.1 Reactivity
Refer to section: Possibility of hazardous reactions.
Chemical stability: Stable under recommended storage conditions.
Possibility of hazardous reactions:
No dangerous reactions with proper and specified storage and handling
Conditions to avoid:Keep away from heat. Protect from direct sunlight. Avoid generation of dust. Avoid the
formation of aerosol/vapors.
Incompatible materials:Strong bases, strong acids, strong oxidizing agents.
Hazardous decomposition products:
Caprolactam, nitrogen oxides (NOx), amines, carbon monoxide and carbon dioxide,
hydrogen cyanide, isocyanates, isocyanic acid.
Thermal decomposition:No data available
printed by Airtech Advanced Materials Group with Qualisys SUMDAT
Safety information sheet
Voluntary product information following the Safety Data Sheet format
Bagging Films
Material number 1025
Revision date: 10/5/2023
Version: 7.6
Replaces version: 7.5
Language: en-US
Date of first version:10/21/2014
Page: 6 of 8
9. Toxicological information
Toxicological tests
Toxicological effects:The statements are derived from the properties of the single components. No toxicological
data is available for the product as such.
Acute toxicity (oral): Lack of data.
Acute toxicity (dermal): Lack of data.
Acute toxicity (inhalative): Lack of data.
Skin corrosion/irritation: Lack of data.
Serious eye damage/irritation: Lack of data.
Sensitisation to the respiratory tract: Lack of data.
Skin sensitisation: Lack of data.
Germ cell mutagenicity/Genotoxicity: Lack of data.
Carcinogenicity: Lack of data.
Reproductive toxicity: Lack of data.
Effects on or via lactation: Lack of data.
Specific target organ toxicity (single exposure): Lack of data.
Specific target organ toxicity (repeated exposure): Lack of data.
Aspiration hazard: Lack of data.
Other information: Toxic fumes may be emitted at elevated temperatures. Processing, e.g. by cutting,
sawing or grinding, can produce particles and dust. Dust may irritate airways and cause
bronchitis symptoms.
Information about Caprolactam: Harmful if swallowed. Harmful if inhaled. Causes skin
irritation. Causes serious eye irritation. May cause respiratory irritation.
Symptoms
In case of inhalation:
Inhalation of dust may cause irritation of the respiratory system. Overheating released
mist or vapors can irritate the respiratory tracts.
Other symptoms: Cough, respiratory complaints, dizziness, nausea, vomiting.
After contact with skin: The melted product can cause severe burns.
After eye contact:
Process vapors can irritate the eyes. Dust contact with the eyes can lead to mechanical
irritation.
10. Ecological information
Ecotoxicity
Further details: No data available
Persistence and degradability
Further details: Product is not biodegradable.
Bioaccumulative potential
Partition coefficient: n-octanol/water:
No data available
printed by Airtech Advanced Materials Group with Qualisys SUMDAT
Safety information sheet
Voluntary product information following the Safety Data Sheet format
Bagging Films
Material number 1025
Revision date: 10/5/2023
Version: 7.6
Replaces version: 7.5
Language: en-US
Date of first version:10/21/2014
Page: 7 of 8
Mobility in soil
No data available
Results of PBT and vPvB assessment
No data available
Additional ecological information
General information:Avoid release to the environment.
11. Disposal considerations
Product
Recommendation: Dispose of waste according to applicable legislation. Recycling or special waste
incineration.
Package
Recommendation: Dispose of waste according to applicable legislation. Non-contaminated packages may be
recycled.
12. Transport information
UN number
ADR/RID, IMDG, IATA-DGR:
not applicable
UN proper shipping name
ADR/RID, IMDG, IATA-DGR:
Not restricted
Transport hazard class(es)
ADR/RID, IMDG, IATA-DGR:
not applicable
Packing group
ADR/RID, IMDG, IATA-DGR:
not applicable
Environmental hazards
Marine pollutant: no
14.6 Special precautions for user
USA: Department of Transportation (DOT)
Proper shipping name: Not restricted
Sea transport (IMDG)
Proper shipping name:: Not restricted
Marine pollutant: no
printed by Airtech Advanced Materials Group with Qualisys SUMDAT
Safety information sheet
Voluntary product information following the Safety Data Sheet format
Bagging Films
Material number 1025
Revision date: 10/5/2023
Version: 7.6
Replaces version: 7.5
Language: en-US
Date of first version:10/21/2014
Page: 8 of 8
Air transport (IATA)
Proper shipping name:: Not restricted
Further information
No dangerous good in sense of these transport regulations.
Transport in bulk according to Annex II of MARPOL 73/78 and the IBC Code
No data available
National regulations – U.S. Federal Regulations
This product is an article as defined by TSCA regulations, and is exempt from TSCA
inventory listing requirements.
National regulations – U.S. State Regulations
No data available
National regulations – Great Britain
Hazchem-Code: –
Further regulations, limitations and legal requirements
For this mixture a chemical safety assessment is not required.
13. Other information
Abbreviations and acronyms:
ADN: European Agreement concerning the International Carriage of Dangerous Goods by Inland Waterways
ADR: European Agreement concerning the International Carriage of Dangerous Goods by Road
CAS: Chemical Abstracts Service
CFR: Code of Federal Regulations
CLP: Classification, Labelling and Packaging
DMEL: Derived minimal effect level
DNEL: Derived no-effect level
EC: European Community
EN: European Standard
EQ: Excepted quantities
IATA: International Air Transport Association
IATA-DGR: International Air Transport Association Dangerous Goods Regulations
IBC Code: International Code for the Construction and Equipment of Ships carrying Dangerous Chemicals in Bulk
IMDG Code: International Maritime Dangerous Goods Code
MARPOL: Maritime Pollution: The International Convention for the Prevention of Pollution from Ships
OSHA: Occupational Safety and Health Administration
PBT: Persistent, bioaccumulative and toxic
PNEC: Predicted no-effect concentration
RID: Regulations Concerning the International Carriage of Dangerous Goods by Rail
TRGS: Technical Rules for Hazardous Substances
TSCA: Toxic Substance Control Act
vPvB: Very persistent and very bioaccumulative
Reason of change: Changes in section 1: Changes of product list
Department issuing data sheet
Contact person: see section 1: Department responsible for information
This data sheet cannot cover all possible situations which the user may experience during processing. Each aspect of your operation should be
examined to determine if, and which additional precautions may be necessary. All health and safety information contained in this data sheet should be
provided to your employees and customers. It is your responsibility to develop appropriate workplace instructions and training programs for employees.
As the conditions and methods of use are beyond our control, we do not assume any responsibility and expressly disclaim any liability for any use of
this product. The information supplied on this safety data sheet complies with our current level of knowledge as well as with national and EU
regulations. All statements or suggestions are made without warranty, expressed or implied, regarding accuracy of information, the hazards connected
with the use of the product or the results to be obtained from the use thereof.
printed by Airtech Advanced Materials Group with Qualisys SUMDAT
by | Sep 27, 2025
by | Sep 27, 2025
by | Sep 27, 2025
by | Sep 27, 2025
SAFETY DATA SHEET
NYLON FILM/FABRIC/FELT
Revision Date 06/22/2022
PRCO90080145
Version : 1.00 / US ( Z8 )
1 / 12
SECTION 1: Identification of the substance/mixture and of the company/undertaking
1.1 Product identifier
– Trade nameNYLON FILM/FABRIC/FELT
1.2 Relevant identified uses of the substance or mixture and uses advised against
Uses of the Substance / Mixture
– Article
1.3 Details of the supplier
Company
Aerovac LLC
955-10 National Parkway, Schaumburg, Il 60173, USA
+1-800-621-8003 (USA/Canada), +1-847-437-0200 (International)
Aerovac Mondov S.r.L.
Via Vigevano 1, 12084 Mondovi, ITALY
+39 (0) 174 566200
Aerovac Toulouse SAS
1 rue de la Sausse, 31240 Saint Jean, FRANCE
+33 (0) 5 61 378989
Aerovac Keighley Ltd 500
Bradford Road, Sandbeds, Keighley, BD20 5NG, UK
+44 (0) 1274 550500
Composites One Canada ULC
1100 Rue Parent Rd, Suite 200, Saint-Bruno, QC J3V 6L8, CANADA
+1-450-678-3330
1.4 Emergency telephone
EMERGENCY 24-Hour Phone Number:
CHEMTREC +1-800-424-9300 USA and Canada / +1-703-527-3887 International
SECTION 2: Hazards identification
Although OSHA has not adopted the environmental portion of the GHS regulations, this document may include information on
environmental effects.
2.1 Classification of the substance or mixture
HCS 2012 (29 CFR 1910.1200)
– Not a hazardous product according to the OSHA Globally Harmonized System (GHS).
2.2 Label elements
HCS 2012 (29 CFR 1910.1200)
– Not a hazardous product according to the OSHA Globally Harmonized System (GHS).
SAFETY DATA SHEET
NYLON FILM/FABRIC/FELT
Revision Date 06/22/2022
PRCO90080145
Version : 1.00 / US ( Z8 )
2 / 12
2.3 Other hazards which do not result in classification
– By excessive exposure to dust, eye and respiratory tract irritation is possible.
SECTION 3: Composition/information on ingredients
3.1 Substance
– Not applicable, this product is an article.
3.2 Mixture
– Not applicable, this product is an article.
Hazardous Ingredients and Impurities
– No ingredients are hazardous.
SECTION 4: First aid measures
4.1 Description of first-aid measures
In case of inhalation
– Negligible or unlikely exposure pathways
– Move to fresh air in case of accidental inhalation of dust or fumes from overheating or combustion.
In case of skin contact
– If skin irritation occurs, seek medical advice/attention.
In case of eye contact
– negligible
– In case of eye contact
– Rinse with running water whilst keeping the eyes wide open.
In case of ingestion
– negligible
– In case of ingestion of large amount:
– Do NOT induce vomiting.
– Consult a physician.
4.2 Most important symptoms and effects, both acute and delayed
Effects
– No hazards to be specially mentioned.
– Inhalation of dust may cause shortness of breath, tightness of the chest, a sore throat and cough.
– Contact with dust can cause mechanical irritation or drying of the skin.
– Dust contact with the eyes can lead to mechanical irritation.
4.3 Indication of any immediate medical attention and special treatment needed
Notes to physician
– When symptoms persist or in all cases of doubt seek medical advice.
SAFETY DATA SHEET
NYLON FILM/FABRIC/FELT
Revision Date 06/22/2022
PRCO90080145
Version : 1.00 / US ( Z8 )
3 / 12
SECTION 5: Firefighting measures
Flash point> 752 F (> 400 C)Autoignition temperature> 842 F (> 450 C)Flammability / Explosive limitNo data available
5.1 Extinguishing media
Suitable extinguishing media
– Water spray
– Foam
– Carbon dioxide (CO2)
– Multipurpose powders
Unsuitable extinguishing media
– High volume water jet
5.2 Special hazards arising from the substance or mixture
– Under fire conditions:
– Will burn
– On combustion, toxic gases are released.
5.3 Advice for firefighters
Special protective equipment for fire-fighters
– In the event of fire, wear self-contained breathing apparatus.
Specific fire fighting methods – Do not use a solid water stream as it may scatter and spread fire.Further information
– Standard procedure for chemical fires.
– Collect contaminated fire extinguishing water separately. This must not be discharged into drains.
– Fire residues and contaminated fire extinguishing water must be disposed of in accordance with local regulations.
SECTION 6: Accidental release measures
6.1 Personal precautions, protective equipment and emergency procedures
– For further information refer to section 8 “Exposure controls / personal protection.”
6.2 Environmental precautions
– Do not allow uncontrolled discharge of product into the environment.
6.3 Methods and materials for containment and cleaning up
– Avoid dust formation.
– Dispose of in accordance with local regulations.
6.4 Reference to other sections
– 7. HANDLING AND STORAGE
SAFETY DATA SHEET
NYLON FILM/FABRIC/FELT
Revision Date 06/22/2022
PRCO90080145
Version : 1.00 / US ( Z8 )
4 / 12
– 8. EXPOSURE CONTROLS/PERSONAL PROTECTION
– 13. DISPOSAL CONSIDERATIONS
SECTION 7: Handling and storage
7.1 Precautions for safe handling
– Heating or curing of unused rolls or sheets of product prior to disposal is not recommended.
– Heating a large mass of product can lead to a rapid decomposition reaction, generating heat, smoke and possibly
fire.
– Provide good ventilation of working area (local exhaust ventilation if necessary).
Hygiene measures
– Handle in accordance with good industrial hygiene and safety practice.
– Wash hands before breaks and at the end of workday.
– When using do not eat, drink or smoke.
– Eye wash bottles or eye wash stations in compliance with applicable standards.
7.2 Conditions for safe storage, including any incompatibilities
Requirements for storage rooms and vessels
– To guarantee the quality and properties of the product keep according to Storage temperature and conditions.
– Store in dry, well-ventilated premises at ambient temperature.
7.3 Specific end use(s)
– Contact your supplier for additional information
SECTION 8: Exposure controls/personal protection
Introductory Remarks: These recommendations provide general guidance for handling this product. Because specific work
environments and material handling practices vary, safety procedures should be developed for each intended application. Assistance
with selection, use and maintenance of worker protection equipment is generally available from equipment manufacturers.
8.1 Control parameters
– Contains no substances with occupational exposure limit values.
8.2 Exposure controls
Control measures
Engineering measures
– Provide appropriate exhaust ventilation at places where dust is formed.
– Apply technical measures to comply with the occupational exposure limits.
Individual protection measures
Respiratory protection
– Keep in a well-ventilated place.
– Use the indicated respiratory protection if the occupational exposure limit is exceeded and/or in case of product
release (dust).
Hand protection
– Take note of the information given by the producer concerning permeability and break through times, and of special
workplace conditions (mechanical strain, duration of contact).
– Impervious gloves
SAFETY DATA SHEET
NYLON FILM/FABRIC/FELT
Revision Date 06/22/2022
PRCO90080145
Version : 1.00 / US ( Z8 )
5 / 12
Eye protection
– Dust proof goggles, if dusty.
– Eye wash bottles or eye wash stations in compliance with applicable standards.
Skin and body protection
– Dust impervious protective suit
Hygiene measures
– Handle in accordance with good industrial hygiene and safety practice.
– Wash hands before breaks and at the end of workday.
– When using do not eat, drink or smoke.
– Eye wash bottles or eye wash stations in compliance with applicable standards.
SECTION 9: Physical and chemical properties
Physical and Chemical properties here represent typical properties of this product. Contact the business area using the Product
information phone number in Section 1 for its exact specifications.
9.1 Information on basic physical and chemical properties
Physical statesolidFormfilm, fabricColorvarious coloursOdorodorlessOdor ThresholdNo data availableMelting point/freezing pointMelting point/range: 419 – 509 F (215 – 265 C) Initial boiling point and boiling rangeBoiling point/boiling range:
Not applicable
Flammability (solid, gas)No data availableFlammability (liquids)No data availableFlammability / Explosive limitNo data availableFlash point> 752 F (> 400 C) Autoignition temperatureNo data availableDecomposition temperature> 662 F (> 350 C)pHNot applicableViscosityNo data availableSolubilityWater solubility:
negligible
Partition coefficient: n-octanol/waterNo data availableVapor pressureNot applicable
SAFETY DATA SHEET
NYLON FILM/FABRIC/FELT
Revision Date 06/22/2022
PRCO90080145
Version : 1.00 / US ( Z8 )
6 / 12
DensityNo data availableRelative densityNo data availableRelative vapor densityNo data availableParticle characteristicsNo data availableEvaporation rate (Butylacetate = 1)Not applicable
9.2 Other information
Self-ignition> 842 F (> 450 C) Corrosion of MetalsNot corrosive to metals.Molecular weightNot applicableSolid in solution
Not applicable
SECTION 10: Stability and reactivity
10.1 Reactivity
– no data available
10.2 Chemical stability
– Stable under normal conditions.
10.3 Possibility of hazardous reactions
polymerization
– Hazardous polymerization does not occur.
10.4 Conditions to avoid
– no data available
10.5 Incompatible materials
– Strong acids
– Bases
10.6 Hazardous decomposition products
–
–
–
–
–
–
–
–
–
SECTION 11: Toxicological information
11.1 Information on toxicological effects
SAFETY DATA SHEET
NYLON FILM/FABRIC/FELT
Revision Date 06/22/2022
PRCO90080145
Version : 1.00 / US ( Z8 )
7 / 12
Acute toxicityAcute oral toxicityThe product in the form placed on the market does not present a hazard for acute
oral toxicity under normal handling conditions. The hazardous components (if
present) are not intended to be released.
Acute inhalation toxicityThe product in the form placed on the market does not present a hazard for acute
inhalation toxicity under normal handling conditions. The hazardous components
(if present) are not intended to be released.
Acute dermal toxicityNot classified as hazardous for acute dermal toxicity according to GHS.
Expert judgment
Based on available data, the classification criteria are not met.
Acute toxicity (other routes of
administration)
Not applicableSkin corrosion/irritationNot classified as irritating to skin
Expert judgment
Based on available data, the classification criteria are not met.
Serious eye damage/eye irritationThe product in the form placed on the market does not present a hazard for eye
irritation under normal handling conditions. The hazardous components (if
present) are not intended to be released.
Respiratory or skin sensitizationThe product in the form placed on the market does not present a hazard for
respiratory sensitization under normal handling conditions. The hazardous
components (if present) are not intended to be released.
Does not cause skin sensitization.
Expert judgment
Based on available data, the classification criteria are not met.
Mutagenicity
Genotoxicity in vitroProduct is not considered to be genotoxic
Expert judgment
Based on available data, the classification criteria are not met.
Genotoxicity in vivoProduct is not considered to be genotoxic
Expert judgment
Based on available data, the classification criteria are not met.
CarcinogenicityThe product is not considered to be carcinogenic.
Expert judgment
Based on available data, the classification criteria are not met.
This product does not contain any ingredient designated as probable or suspected human carcinogens by:
NTP
NTP
IARC
IARC
OSHA
OSHA
Toxicity for reproduction and development
Toxicity to reproduction / fertility The product is not considered to affect fertility., Expert judgment, Based on
available data, the classification criteria are not met.
Developmental Toxicity/Teratogenicity The product is not considered to be toxic for development., Expert judgment,
Based on available data, the classification criteria are not met.
STOT
STOT-single exposureThe product in the form placed on the market does not present a hazard under
normal handling conditions. The hazardous components (if any is present) are not
intended to be released.
Expert judgment, Based on available data, the classification criteria are not met.
STOT-repeated exposureThe product in the form placed on the market does not present a hazard under
normal handling conditions. The hazardous components (if any is present) are not
intended to be released.
Expert judgment, Based on available data, the classification criteria are not met.
SAFETY DATA SHEET
NYLON FILM/FABRIC/FELT
Revision Date 06/22/2022
PRCO90080145
Version : 1.00 / US ( Z8 )
8 / 12
No data is available on the product itself.
Experience with human exposure
Experience with human exposure : Inhalation
No data is available on the product itself.
Experience with human exposure : Skin contact
No data is available on the product itself.
Experience with human exposure : Eye contact
No data is available on the product itself.
Experience with human exposure : Ingestion
No data is available on the product itself.Aspiration toxicityThe product in the form placed on the market does not present a hazard for
aspiration toxicity under normal handling conditions. The hazardous components
(if present) are not intended to be released.
SECTION 12: Ecological information
12.1 Toxicity
Aquatic Compartment
Acute toxicity to fishThe product itself has not been tested.Acute toxicity to daphnia and other
aquatic invertebrates
The product itself has not been tested.Toxicity to aquatic plantsThe product itself has not been tested.Toxicity to microorganismsThe product itself has not been tested.Chronic toxicity to fishThe product itself has not been tested.Chronic toxicity to daphnia and
other aquatic invertebrates
The product itself has not been tested.
Sediment compartment
Toxicity to benthic organismsThe product itself has not been tested.
Terrestrial Compartment
Toxicity to soil dwelling organismsThe product itself has not been tested.Toxicity to terrestrial plantsThe product itself has not been tested.Toxicity to above ground organismsThe product itself has not been tested.
12.2 Persistence and degradability
Abiotic degradation
Stability in waterThe product itself has not been tested.PhotodegradationThe product itself has not been tested.
Physical- and photo-chemical elimination
Physico-chemical removabilityNo data available
Biodegradation
SAFETY DATA SHEET
NYLON FILM/FABRIC/FELT
Revision Date 06/22/2022
PRCO90080145
Version : 1.00 / US ( Z8 )
9 / 12
BiodegradabilityThe product itself has not been tested.Ratio BOD / CODThe product itself has not been tested.Ratio BOD / ThODThe product itself has not been tested.Biochemical Oxygen Demand (BOD)No data availableDissolved organic carbon (DOC)No data availableChemical Oxygen Demand (COD)No data availableAdsorbed organic bound halogens
(AOX)
No data availableDegradability assessmentThe product itself has not been tested.
12.3 Bioaccumulative potential
Partition coefficient: n-
octanol/water
The product itself has not been tested.Bioconcentration factor (BCF)The product itself has not been tested.
12.4 Mobility in soil
Adsorption potential (Koc)The product itself has not been tested.Known distribution to
environmental compartments
The product itself has not been tested.
12.5 Results of PBT and vPvB assessment
No data available
12.6 Other adverse effects
Ecotoxicity assessment
Short-term (acute) aquatic hazardThe product in the form placed on the market does not present a hazard for
aquatic toxicity under normal handling conditions. The hazardous components (if
present) are not intended to be released.
Long-term (chronic) aquatic hazardThe product in the form placed on the market does not present a hazard for
aquatic toxicity under normal handling conditions. The hazardous components (if
present) are not intended to be released.
SECTION 13: Disposal considerations
13.1 Waste treatment methods
Product Disposal
– The Company encourages the recycle, recovery and reuse of materials, where permitted. If disposal is necessary, The
Company recommends that organic materials, especially when classified as hazardous waste, be disposed of by thermal
treatment or incineration at approved facilities. All local and national regulations should be followed.
SECTION 14: Transport information
49 CFR
not regulated
SAFETY DATA SHEET
NYLON FILM/FABRIC/FELT
Revision Date 06/22/2022
PRCO90080145
Version : 1.00 / US ( Z8 )
10 / 12
TDG
not regulated
NOM
not regulated
IMDG
not regulated
IATA
not regulatedNote: The above regulatory prescriptions are those valid on the date of publication of this sheet. Given the possible evolution of
transportation regulations for hazardous materials, it would be advisable to check their validity with your sales office.
SECTION 15: Regulatory information
15.1 Notification status
Inventory InformationStatusUnited States TSCA Inventory-
or excluded from inventory registry
requirements.
Canadian Domestic Substances List (DSL)-
or excluded from inventory registry
requirements.
Australian Inventory of Industrial Chemicals (AIIC)-
or excluded from inventory registry
requirements.
Japan. CSCL – Inventory of Existing and New Chemical Substances-
or excluded from inventory registry
requirements.
Korea. Korean Existing Chemicals Inventory (KECI)-
or excluded from inventory registry
requirements.
China. Inventory of Existing Chemical Substances in China (IECSC)-
or excluded from inventory registry
requirements.
Philippines Inventory of Chemicals and Chemical Substances (PICCS)-
or excluded from inventory registry
requirements.
Taiwan Chemical Substance Inventory (TCSI)-
or excluded from inventory registry
requirements.
New Zealand. Inventory of Chemical Substances-
or excluded from inventory registry
requirements.
SAFETY DATA SHEET
NYLON FILM/FABRIC/FELT
Revision Date 06/22/2022
PRCO90080145
Version : 1.00 / US ( Z8 )
11 / 12
EU. European Registration, Evaluation, Authorization and Restriction of Chemical
(REACH)
–
information
15.2 Federal Regulations
US. EPA EPCRA SARA Title III
SARAHAZARD DESIGNATION SECTIONS 311/312(40 CFR 370)
No SARA Hazards
Section 313 Toxic Chemicals (40 CFR 372.65)
This material does not contain any chemical components with known CAS numbers that exceed the threshold (De Minimis)
reporting levels established by SARA Title III, Section 313.
Section 302 Emergency Planning Extremely Hazardous Substance Threshold Planning Quantity (40 CFR 355)
This material does not contain any components with a section 302 EHS TPQ.
Section 302 Emergency Planning Extremely Hazardous Substance Reportable Quantity (40 CFR 355)
This material does not contain any components with a SARA 302 RQ.
Section 304 Emergency Release Notification Reportable Quantity (40 CFR 355)
This material does not contain any components with a section 304 EHS RQ.
US. EPA CERCLA Hazardous Substances and Reportable Quantities (40 CFR 302.4)
This material does not contain any components with a CERCLA RQ.
15.3 State Regulations
US. California Safe Drinking Water & Toxic Enforcement Act (Proposition 65)
This product is not sold or intended to be sold as a “consumer product” as defined under California’s Proposition 65 statute and
regulations. If you require information, please contact your local sales representative.
SECTION 16: Other information
NFPA (National Fire Protection Association) – Classification
Health1 slightFlammability1 slightInstability or Reactivity0 minimal
Further information
– Distribute new edition to clients
Date Prepared:
Key or legend to abbreviations and acronyms used in the information sheet
-ACGIH: American Conference of Governmental Industrial Hygienists-OSHA: Occupational Safety and Health Administration-NTP: National Toxicology Program-IARC: International Agency for Research on Cancer-NIOSH: National Institute for Occupational Safety and Health
– ADR: European Agreement on International Carriage of Dangerous Goods by Road.
– ADN: European Agreement on the International Carriage of Dangerous Goods by Inland
Waterways.
SAFETY DATA SHEET
NYLON FILM/FABRIC/FELT
Revision Date 06/22/2022
PRCO90080145
Version : 1.00 / US ( Z8 )
12 / 12
– RID: European Agreement concerning the International Carriage of Dangerous Goods by Rail.
– IATA: International Air Transport Association.
– ICAO-TI: Technical Specification for Safe Transport of Dangerous Goods by Air.
– IMDG: International Maritime Dangerous Goods.
– TWA: Time weighted average
– ATE: Estimated value of acute toxicity
– EC: European Community number
– CAS: Chemical Abstracts Service.
– LD50: Substance that causes 50% (half) death in the test animals group (Median Fatal Dose).
– LC50: Substance concentration causing 50% (half) death in the test animals group.
– EC50: Effective Concentration of the substance causing the maximum of 50%.
– PBT: Persistent, Bioaccumulative and Toxic substance.
– vPvB: Very Persistent and Very Bioaccumulative.
– SEA: Classification, labeling, packaging regulation
– DNEL: Derived No Effect Level
– PNEC: Predicted No Effect Concentration
– STOT: Specific Target Organ Toxicity
Not all acronyms listed above are referenced in this document.
The information provided in this Safety Data Sheet is correct to the best of our knowledge, information, and belief at the date of its
publication. Such information is only given as a guidance to help the user handle, use, process, store, transport, dispose, and release
the product in satisfactory safety conditions and is not to be considered as a warranty or quality specification. It should be used in
conjunction with technical sheets but do not replace them. Thus, the information only relates to the designated specific product and may
not be applicable if such product is used in combination with other materials or in any other manufacturing process, unless otherwise
specifically indicated. It does not release the user from ensuring he is in conformity with all regulations linked to its activity.
by | Sep 27, 2025
MATERIAL SAFETY DATA SHEET
Page 1 of 6
Impression Set V
1. PRODUCT AND COMPANY NAME
PRODUCT NAME: Impression Set V
DESCRIPTION: Pre-fit Verification Film
MANUFACTURER: Cytec Process Materials
12801 Ann Street
Santa Fe Springs, CA 90670
FOR MORE INFORMATION CALL: 562-906-3300
IN CASE OF EMERGENCY CALL: 562-906-3300
2. COMPOSITION/INFORMATION ON INGREDIENTS
PVC film and sheet are classified as articles and do not present and recognized health hazards.
This product as do most plastic products contains chemicals which can be hazardous. These
chemicals, however, are mixed and bound in plastic are not released except under extreme
circumstances such as fire. Plasticized PVC film is a mixture of resin, plasticizers, stabilizers,
processing aids, modifiers, pigments, inerts and residual solvent.
Ingredient Name
CAS # % of Ingredient
Cadmium N/A <0.2%
Antimony N/A <3.5%
Chromates N/A <2.0%
Organic Plasticizers N/A <65%
MATERIAL SAFETY DATA SHEET
Page 2 of 6
3. HAZARD IDENTIFICATION
POTENTIAL HEALTH HAZARDS
Route of Entry: Inhalation, Eye Contact
Target Organs: N/A
Inhalation: Vapors and fumes from processing (especially at elevated
temperatures) may cause irritation of the nose, throat and upper
respiratory tract.
Skin Contact: Not hazardous
Eye Contact: Vapors and fumes from processing (especially at elevated
temperatures) may cause irritation of the eyes.
Ingestion: N/A
4. FIRST AID MEASURES
Inhalation: Remove to fresh air. If breathing is difficult, administer oxygen. If
respiration stops give mouth-to mouth resuscitation. Seek medical
attention
Skin Contact: Flush skin thoroughly with soap and cool water for at least five minutes
Eye Contact: Immediately flush eyes with potable water for at least 15 minutes while
forcibly holding eyelids apart. Seek medical attention
Ingestion: Not deemed to be a normal route of exposure
Note to Physician: Material has no significant toxic hazard. Hazardous fumes and gases
that result from incomplete combustion and decomposition are carbon
monoxide. Low-level cyanides and NOx and other unidentified products
of hydrocarbon degradation
MATERIAL SAFETY DATA SHEET
Page 3 of 6
5. FIRE FIGHTING MEASURES
FLAMMABLE PROPERTIES
Flash Point (Method Used): N/A
LEL: N/A
UEL: N/A
Extinguishing Method: Dry chemical foam, water fog, or spray
Special Fire Fighting Procedures: Wear full protective equipment and NIOSH approved
pressure demand self contained breathing apparatus.
Unusual Fire and Explosion Hazards: Because PVC compounds contain chlorine in the polymer
molecule, these materials are difficult to ignite. Like all
organic materials, this product is combustible and will burn
by application of intense heat. Protect from open flame and
maintain proper clearance when using heating devices etc.
Static sparking can occur during processing. Flammable
materials should be removed from the immediate vicinity or
controlled. The use of static suppressants and grounding
devices is recommended. When burned, the hazardous
decomposition products that will result because of
incomplete combustion include carbon monoxide, other
unidentified products of hydrocarbon degradation, NOx;
low level cyanides and hydrogen chloride
6. ACCIDENTAL RELEASE MEASURES
Always wear recommended personal protective equipment. Collect and place in a solid waste
container.
7. HANDLING AND STORAGE
Handling Precautions: Use normal personal hygiene and good house keeping.
Storage Requirements: Store in a cool dry place. Store away from easily ignited chemicals and
materials or open flames
MATERIAL SAFETY DATA SHEET
Page 4 of 6
8. EXPOSURE CONTROL/PERSONAL PROTECTION ON
Engineering Controls: Process which generated vapors, dust or fumes should be
performed with adequate ventilation. If necessary, use NIOSH
approved chemical cartridge respirator.
Engineering Controls: Process which generated vapors, dust or fumes should be
performed with adequate ventilation. If necessary, use NIOSH
approved chemical cartridge respirator.
Protective Equipment: Use heavy cotton or insulated gloves to handle hot plastics. Safety
glasses with side shields are recommended for all industrial
workplaces.
Protective Equipment: Use heavy cotton or insulated gloves to handle hot plastics. Safety
glasses with side shields are recommended for all industrial
workplaces.
Exposure Guideline/Other: Exposure Guideline/Other:
ComponentComponent
OSHA PEL (mg/m
3
) ACGIH TLV (mg/m
3
)
Cadmium 0.2 0.05
Antimony 0.5 0.5
Chromates 0.1 0.05
Organic Plasticizers 3 3
9. PHYSICAL AND CHEMICAL PROPERTIES
Appearance: Solid plastic sheet or film
Physical Status: Solid
Odor: Slight
pH: N/A
Vapor Pressure: N/A
Vapor Density: N/A
Boiling Point: N/A
Freezing/Melting Point: 93C (200F)
Solubility: Insoluble
Spec. Grav./Density: 1.20-1.60
Percent Volatile: <2.0%
MATERIAL SAFETY DATA SHEET
Page 5 of 6
10. STABILITY AND REACTIVITY
Stability: Stable
Conditions to avoid: None known
Materials to avoid (Incompatibility): N/A
Hazardous Decomposition Products: hydrogen chloride, carbon monoxide, low level cyanide
s and NOx, and other unidentified products of
hydrocarbon degradation
Hazardous Polymerization: Will not occur
11. TOXICOLOGICAL INFORMATION
Immediate (Acute) Effects: Not determined
Delayed (Sub-chronic and chronic) Effects:
Cadmium organo-metallic complexes are encapsulated in the polymer matrix. Under traditional
post processing conditions, the chronic effects of cadmium exposure include lung, kidney,
neurological and carcinogenic disorders. Antimony compounds are generally less toxic than
antimony. Principal organs attacked include certain enzyme systems (protein and carbohydrate
metabolism), heart, lungs, and the mucous membrane of the respiratory tract. Chronic poisoning
presents symptoms of dry throat, nausea, headache, sleeplessness, loss of appetite and
dizziness. Liver and kidney degenerative changes are late manifestations. Chromate salts are
recognized carcinogens of the lungs, nasal cavity and paranasal sinus. The vapors of the
organic plasticizers used to flexiblize the PVC resin are not considered to present a significant
health risk when the film is post processed in a traditional manner. Processing in a manner
which results in the accumulation of the organic plasticizer vapors is to be avoided by the
practice of ventilation procedures that keep the workplace exposure below that specified in your
local code. Effects of overexposure to these organic plasticizer vapors include moderate
irritation to the skin, eyes and mucous membranes. Because product performance requirements
vary, the opportunity exists for plasticizer mixtures of phthalates, adipates, azelates, tri-
melliates, chlorinated hydrocarbons, soyas, polymerics and phosphates.
The phosphates used do not exhibit cholinesterase depression or other neurotoxicity.
Other Data: None
12. ECOLOGICAL INFORMATION
Material is considered inert and not expected to be biodegradable or toxic.
MATERIAL SAFETY DATA SHEET
Page 6 of 6
13. DISPOSAL CONSIDERATIONS
Dispose of in compliance with Federal, state and local government regulations. Usually is
considered an inert packaging material that can be recycled or landfilled.
14. TRANSPORT INFORMATION
US DOT Hazard Class: Not regulated
US DOT ID Number: Not applicable
For additional information on shipping regulations affecting this material, contact the information
number found in Section 1.
15. REGULATORY INFORMATION
None
16. OTHER INFORMATION
Current Issue Date: 10/05/2010
Previous Issue Date: 04/07/2008
by | Sep 27, 2025
GENERAL SEALANTS, INC. 300 S. Turnbull Canyon Rd. / City of Industry, CA 91745 / P.O. Box 3855 / City of Industry, CA 91744
(626) 961-0211 – (800) 762-1144 – Fax: (626) 968-5140
sales@generalsealants.com www.generalsealants.com Page 1 of 5
GENERAL SEALANTS, INC.
GS# 43MR Sealant
Safety Data Sheet
Section 1 – Product and Company Identification
Section 2 – Hazard(s) Identification
Section 3 – Composition/Information on Ingredients
*The specific chemical identity and/or exact percentage (concentration) of this composition has been withheld as a trade secret.
Section 4 – First Aid Measures
Section 5 – Fire Fighting Measures
Product Identifier GS# 43MR Sealant
Manufacturer General Sealants, Inc.
Address 300 S. Turnbull Canyon Road City of Industry, CA 91745
Information Phone 1-800-762-1144 or 1-626-961-0211
Website www.generalsealants.com
Recommended Use Sealant Tape
Emergency Phone 1-800-762-1144 or 1-626-961-0211
Hazard Classification
Not classified as hazardous according to OSHA Hazard Communication Standard, 29 CFR
1910.1200.
Signal Word Not Applicable.
Pictograms Not Applicable.
Hazards Not Otherwise Classified None.
Ingredient C.A.S. No. % by Wt
Talc 14807-96-6 0-25 Trade Secret*
Inhalation
Under normal conditions of use, inhalation of product is unlikely. No need for first aid is
anticipated.
Skin Contact Wash with soap and water. If signs or symptoms develop, get medical attention.
Eye Contact Flush with water for at least 15 minutes. If irritation persists, get medical attention.
Ingestion Do not induce vomiting. Flush mouth with water and get medical attention.
Suitable Extinguishing Media
Use methods appropriate for the surrounding fire. Water spray (fog), foam, dry chemical,
or carbon dioxide are all appropriate.
Fire and Explosion Hazards None inherent in this product.
Special Protective Actions for
Firefighters
No special protective actions for firefighters are anticipated.
GENERAL SEALANTS, INC. 300 S. Turnbull Canyon Rd. / City of Industry, CA 91745 / P.O. Box 3855 / City of Industry, CA 91744
(626) 961-0211 – (800) 762-1144 – Fax: (626) 968-5140
sales@generalsealants.com www.generalsealants.com Page 2 of 5
GENERAL SEALANTS, INC.
GS# 43MR Sealant
Safety Data Sheet
Section 6 – Accidental Release Measures
Section 7 – Handling and Storage
Section 8 – Exposure Controls/Personal Protection
8.1 Control Parameters
Occupational Exposure Limits
8.2 Exposure Controls
Personal Precautions, Protective
Equipment, and Emergency
Procedures
This product is a solid tape material. This product will not flow and special containment
is not needed. Use appropriate personal protective equipment when handling product.
Only employees properly trained should be part of any spill response.
Environmental Precautions Avoid release to the environment.
Precautions for Safe Handling
For industrial use only. Do not eat, drink, or smoke when using this product. Wash
hands thoroughly after handling.
Conditions for Safe Storage Including
Any Incompatibilities
Store in closed containers at or under 72 F (22 C) under dry warehouse conditions.
Avoid excessive heat.
Ingredient C.A.S. No. Agency Limit Type Additional Comments
Talc 14807-96-6 OSHA
TWA concentration (as
total dust): 0.3 mg/m3;
TWA concentration
(respirable): 0.1 mg/m3
(2.4 millions of particles/
cu. Ft.); TWA: 20 millions
of particles/cu. Ft.
Talc 14807-96-6 ACGIH
TWA (respirable fraction):
2 mg/m3
A4: Not class. as human carcin.
Engineering Controls
Use general dilution ventilation and/or local exhaust ventilation to ensure airborne
exposures stay below local limits. If ventilation is not adequate, use respiratory
protection equipment.
Eye/Face Protection None required.
Skin Protection
Use gloves and/or protective clothing approved to relevant local standards to prevent skin
contact.
Respiratory Protection
Under normal use conditions, airborne exposures are not expected to be significant enough
to require respiratory protection.
GENERAL SEALANTS, INC. 300 S. Turnbull Canyon Rd. / City of Industry, CA 91745 / P.O. Box 3855 / City of Industry, CA 91744
(626) 961-0211 – (800) 762-1144 – Fax: (626) 968-5140
sales@generalsealants.com www.generalsealants.com Page 3 of 5
GENERAL SEALANTS, INC.
GS# 43MR Sealant
Safety Data Sheet
Section 9 – Physical and Chemical Properties
Section 10 – Stability and Reactivity
Specific Physical Form Extruded tape on release liner in roll form.
Color Off-White.
Odor Odorless.
Odor Threshold No Data Available.
Melting Point No Data Available.
Freezing Point Not Applicable.
Boiling Point Not Applicable.
Flash Point No Data Available.
Flammability No Data Available.
Flammability Limits Not Applicable.
Auto Ignition Temperature No Data Available.
Vapor Pressure Not Applicable.
Vapor Density (air=1) Not Applicable.
Evaporation Rate (n-butyl acetate=1) Not Applicable.
Relative Density 1.16 gm/ml
Specific Gravity (water=1) 1.16
Solubility in Water Insoluble.
Partition Coefficient (n-octanol/water) No Data Available.
Decomposition Temperature No Data Available.
Viscosity No Data Available.
Reactivity Product is non-reactive under normal use conditions.
Chemical Stability Stable.
Possibility of Hazardous Reactions Hazardous polymerization will not occur.
Conditions To Avoid None Known.
Incompatible Materials Strong oxidizing agents.
Hazardous Decomposition Products
Thermal decomposition may form carbon dioxide, carbon monoxide, and various
hydrocarbon fumes.
GENERAL SEALANTS, INC. 300 S. Turnbull Canyon Rd. / City of Industry, CA 91745 / P.O. Box 3855 / City of Industry, CA 91744
(626) 961-0211 – (800) 762-1144 – Fax: (626) 968-5140
sales@generalsealants.com www.generalsealants.com Page 4 of 5
GENERAL SEALANTS, INC.
GS# 43MR Sealant
Safety Data Sheet
Section 11 – Toxicological Information
Section 12 – Ecological Information
Section 13 – Disposal Consideration
Section 14 – Transportation Information
Section 15 – Regulatory Information
Section 16 – Other Information
Revision Summary
Date of Issue: 9/23/2019
Supersedes Date: TBD
General Sealants, Inc. SDS s are available at www.generalsealants.com
Acute Toxicity No Data Available.
Chronic/Other Effects No Data Available.
Ecotoxicological Information No ecotoxicity data was found for this product.
Environmental Data No environmental information was found for this product.
Bioaccumulation Potential No Data Available.
Disposal Methods
Dispose in accordance with federal, state and local government regulations to minimize
exposure; see also Section 8 (Exposure Controls/Personal Protection) of this SDS.
DOT (Department of Transportation) Not regulated for land transport.
IATA (International Air Transport Association) Not regulated for air transport.
IMDG (International Maritime Dangerous Goods) Not regulated for sea transport.
OSHA Hazard Communication Standard
When used for its intended purpose, this material is not classified as
hazardous in accordance with OSHA 29 CFR 1910.1200.
REACH
This product is fully compliant with the requirements of European Union
Regulation (EC) 1907/2006 concerning the Registration, Evaluation,
Authorization and Restriction of Chemicals (REACH).
TSCA (Toxic Substances Control Act)
The components of this product are in compliance with the chemical notification
requirements of TSCA. This product is an article as defined by TSCA
regulations, and is exempt from TSCA inventory listing requirements.
NFPA (National Fire Protection Association)
Rating
(Health: 0) (Flammability: 0) (Physical Hazards: 0)
0=Minimal 1=Slight 2=Moderate 3=High 4=Extreme *=Chronic
HMIS (Hazardous Materials Information System)
Rating
(Health: 0) (Flammability: 0) (Physical Hazards: 0)
0=Minimal 1=Slight 2=Moderate 3=High 4=Extreme *=Chronic
GENERAL SEALANTS, INC. 300 S. Turnbull Canyon Rd. / City of Industry, CA 91745 / P.O. Box 3855 / City of Industry, CA 91744
(626) 961-0211 – (800) 762-1144 – Fax: (626) 968-5140
sales@generalsealants.com www.generalsealants.com Page 5 of 5
GENERAL SEALANTS, INC.
GS# 43MR Sealant
Safety Data Sheet
USER S RESPONSIBILITY
THIS PRODUCT INFORMATION CANNOT COVER ALL POSSIBLE SITUATIONS, WHICH THE USER MAY EXPERIENCE DURING PROCESSING. EACH
ASPECT OF YOUR OPERATION SHOULD BE EXAMINED TO DETERMINE IF, OR WHERE, ADDITIONAL PRECAUTIONS MAY BE NECESSARY. ALL
HEALTH AND SAFETY INFOR MATION CONTAINED IN THIS BULLETIN SHOULD BE PROVIDED TO YOUR EMPLOYEES OR CUSTOMERS. IT IS YOUR
RESPONSIBILITY TO USE THIS INFORMATION TO DEVELOP APPROPRIATE WORK PRACTICE GUIDELINES AND EMPLOYEE INSTRUCTIONAL
PROGRAMS FOR YOUR OPERATION.
DISCLAIMER OF LIABILITY
AS THE CONDITIONS OR METHODS OF USE ARE BEYOND OUR CONTROL, GENERAL SEALANTS DOES NOT ASSUME ANY RESPONSIBILITY AND
EXPRESSLY DISCLAIM ANY LIABILITY FOR ANY USE OF THIS MATERIAL. INFORMATI ON CONTAINED HEREIN IS BELIEVED TO BE TRUE AND
ACCURATE, BUT ALL STATEMENTS OR SUGGESTIONS ARE MADE WITHOUT WARRANTY, EXPRESSED OR IMPLIED, REGARDING THE ACCURACY
OF THE INFORMATION, THE HAZARDS CONNECTED WITH THE USE OF THE MATERIAL OR THE RESULTS TO BE O BTAINED FROM THE USE
THEREOF. COMPLIANCE WITH ALL APPLICABLE FEDERAL, STATE, AND LOCAL LAWS AND REGULATIONS REMAINS THE RESPONSIBILITY OF
THE USER.
CONFIDENTIALITY NOTICE
THIS DOCUMENT CONTAINS CONFIDENTIAL INFORMATION BELONGING TO THE SENDER, WHICH IS LEGALLY PRIVILEGED. THE INFORMATION
IS INTENDED ONLY FOR THE USE OF THE INDIVIDUAL OR ENTITY NAMED ABOVE. IF YOU ARE NOT THE INTENDED RECIPIENT, BE AWARE THAT
ANY DISCLOSURE, COPYING, DISTRIBUTION OR USE OF THIS INFORMATION IS PROHIBITED. IF YOU HAVE RECEIVED THIS IN ERROR, PLEASE
CONTACT US IMMEDIATELY AND DELETE (DESTROY) THE DOCUMENT.
WARRANTY
PRODUCTS ARE SOLD WITHOUT WARRANTY, EXPRESSED OR IMPLIED, EXCEPT IF SHOWN TO BE DEFECTIVE IN MATERIALS WITHIN 30 DAYS
OF SHIPMENT BY GENERAL SEALANTS, IT WILL BE REPLACED OR AT GENERAL SEALANTS OPTION THE PURCHASE PRICE WILL BE
REFUNDED TO THE PURCHASER. GENERAL SEALANTS ASSUME NO RESPONSIBILITY FOR CONSEQUENTIAL DAMAGE ARISING FRO M THE USE
OF OUR PRODUCTS. USER MUST CONFIRM THE ADAPTABILITY OF OUR PRODUCTS BY THEIR OWN TEST. NO REPRESENTATIVE OF GENERAL
SEALANTS OR ANY OTHER COMPANY HAS AUTHORIZATION TO GRANT ANY ADDITIONAL WARRANTY.
by | Sep 27, 2025
Safety information sheet
Voluntary product information following the Safety Data Sheet format
Resin Infusion Products
Material number 1074
Revision date: 8/29/2024
Version: 14.5
Replaces version: 14.4
Language: en-US
Date of first version:10/5/2015
Page: 1 of 8
1. Product and company identification
Product identifier
Trade name: Resin Infusion Products
Knitflow 110, Knitflow 150, PVC Tube, FlowPeel 160-37P16-ESG, Dahltexx SP-2,
Dahltexx SP-3, FlowRunner KF160, Vac-Brake, Vac-Brake Pro, Flowstrip PP4, Flowstrip
PP4 Max, Dahlvac RC Vacuum Hose, Flowlease 160-PP200, PP200, Dahlvac MB80,
Breatherflow 20, Dahlpac MC79, Tube mesh, SpiralMesh, Flowstrip, Flowstrip 39,
Flowstrip 39MAX, Greenflow 75, Greenflow 185, Knitflow 160, Knitflow 105 HT, Resinflow
100, Resinflow 60, Resinflow 20, Resinflow 90HT, Flowlease 160-37P16, Flowlease
75-37P16, Flowlease Blue, Flowlease Black, OF313, OF500, OF750, OF1000, OF625V,
Resintrak, Vactrak, VAC-RIC LT, VAC-RIC HT, RIC, RIC HT, RIA, polyethylene and nylon
tubing, , polyethylene and nylon spiral tubing, nylon fittings (NTF, NEF, NCF), Sil-tube,
HTRIL-S59, Infusion valve, Hose clamps A & B, Flowrunner PP2, Tac-Strip HT, PP150,
Dahlpac HT
Relevant identified uses of the substance or mixture and uses advised against
General use: Article: Resin distribution media and auxiliaries
For industrial purposes only
Details of the supplier of the safety data sheet
Company name:
Airtech International, Inc.
5700 Skylab Road
Huntington Beach, CA 92647
E-mail: airtech@airtechintl.com
Website: www.airtechonline.com
Telephone: +1 714.899.8100
Department responsible for
information:
Telephone: +1 714.899.8100
E-mail: airtech@airtechintl.com
Airtech Europe Sarl
Zone industrielle Haneboesch
L 4562 Differdange
Luxembourg
Website: www.airtech.lu
Telephone: +352 582.282
Department responsible for information:
Telephone: +352 582.282
E-mail: sales@airtech.lu
Airtech Advanced Materials UK Ltd.
The Causeway
Broadway Business Park
Chadderton, Oldham
OL9 9XD United Kingdom
Website: www.airtech-amg.co.uk
Telephone: +44 161.947.1610
Department responsible for
information:
Telephone: +44 161.947.1610
E-mail: sales@airtech-amg.co.uk
Airtech Asia Ltd.
No. 161 of Anyuan Rd
Chagugang County
Wuqing District
301721, Tianjin, P.R. China
Website: www.airtech.asia
Telephone: +86 22 8862 9800
Telefax:: +86 22 8862 9900
Department responsible for information:
Telephone: +86 22 8862 9800
E-mail: airtech.asia@airtechasia.com.cn
Emergency phone number
CHEMTREC EMERGENCY PHONE:
Within USA/Canada: 1-(800)424-9300
International: +1 703-741-5970
printed by Airtech Advanced Materials Group with Qualisys SUMDAT
Safety information sheet
Voluntary product information following the Safety Data Sheet format
Resin Infusion Products
Material number 1074
Revision date: 8/29/2024
Version: 14.5
Replaces version: 14.4
Language: en-US
Date of first version:10/5/2015
Page: 2 of 8
2. Hazards identification
Emergency overview
Appearance: Form: solid
Color: varying
Odor: odorless
Classification: Article not subject to hazard labelling or classification.
Regulatory status
This material is not considered hazardous by the U.S. OSHA Hazard Communication
Standard (29 CFR 1910.1200).
Hazards not otherwise classified
Toxic fumes may be emitted at elevated temperatures. Do not breathe vapor. Processing,
e.g. by cutting, sawing or grinding, can produce particles and dust. Avoid inhalation of
dusts, as even inert dusts may functionally affect respiratory organs.
see section 11: Toxicological information
3. Composition / Information on ingredients
Chemical characterization:Article: Thermoplastic, Silicone, Fiberglass, Metal
4. First aid measures
In case of inhalation:In case of inhalation of decomposition products, affected person should be moved into
fresh air and kept still. If the casualty has difficulty breathing, call a doctor immediately.
Following skin contact:After contact with molten product, cool skin area rapidly with cold water. Do not peel
solidified product off the skin. Seek medical attention.
After eye contact: In the event of irritation from processing vapors: Immediately flush eyes with plenty of
flowing water for 10 to 15 minutes holding eyelids apart. In case of troubles or persistent
symptoms, consult an opthalmologist.
After swallowing: Not a probable route of exposure.
In the case of the formation of dust: Rinse mouth. Seek medical treatment in case of
troubles.
Most important symptoms/effects, acute and delayed
In case of inhalation:
Inhalation of dust may cause irritation of the respiratory system. Overheating released
mist or vapors can irritate the respiratory tracts.
Other symptoms: Cough, respiratory complaints, dizziness, nausea, vomiting.
After contact with skin: The melted product can cause severe burns.
After eye contact:
Process vapors can irritate the eyes. Dust contact with the eyes can lead to mechanical
irritation.
Information to physician
Treat symptomatically.
printed by Airtech Advanced Materials Group with Qualisys SUMDAT
Safety information sheet
Voluntary product information following the Safety Data Sheet format
Resin Infusion Products
Material number 1074
Revision date: 8/29/2024
Version: 14.5
Replaces version: 14.4
Language: en-US
Date of first version:10/5/2015
Page: 3 of 8
5. Fire fighting measures
Flash point/flash point range:
No data available
Auto-ignition temperature:No data available
Suitable extinguishing media:
Water spray jet, dry chemical powder, foam, carbon dioxide
Extinguishing media which must not be used for safety reasons:
Full water jet.
Specific hazards arising from the chemical
This material is combustible, but will not ignite readily. Toxic fumes may be emitted at
elevated temperatures.
In case of fire may be liberated: Caprolactam, nitrogen oxides (NOx), amines, carbon
monoxide and carbon dioxide.
Protective equipment and precautions for firefighters:
Wear self-contained positive pressure breathing apparatus and full firefighting protective
clothing.
Additional information:Seal off endangered area. Cool endangered containers with water spray and, if possible,
remove from danger zone. Use water spray jet to knock down vapors. Do not breathe
fumes. Do not allow fire water to penetrate into surface or ground water.
6. Accidental release measures
Personal precautions:Handle in accordance with good industrial hygiene and safety practice.
At processing: Avoid the formation of aerosol/vapors. Avoid generation of dust. Avoid
inhalation and contact with skin and eyes. Wear appropriate protective equipment. Keep
unprotected people away. Ensure adequate ventilation, especially in confined areas.
Environmental precautions:
Do not allow to penetrate into soil, waterbodies or drains.
Methods for clean-up:Take up mechanically, placing in appropriate containers for disposal. Dispose of waste
according to applicable legislation.
7. Handling and storage
Handling
Advices on safe handling:Handle in accordance with good industrial hygiene and safety practice.
At processing: Provide adequate ventilation, and local exhaust as needed. Avoid the
formation of aerosol/vapors. Avoid generation of dust. Avoid inhalation and contact with
skin and eyes. Wear appropriate protective equipment. Keep unprotected people away.
When using do not eat, drink or smoke.
Precautions against fire and explosion:
Take standard precautions to prevent fire.
Storage
Requirements for storerooms and containers:
Keep in a cool place. Keep container dry. Protect from direct sunlight. Keep away from
incompatible materials. Store at room temperature.
Hints on joint storage:Incompatible materials: Strong bases, strong acids, strong oxidizing agents.
Keep away from food and drinks.
printed by Airtech Advanced Materials Group with Qualisys SUMDAT
Safety information sheet
Voluntary product information following the Safety Data Sheet format
Resin Infusion Products
Material number 1074
Revision date: 8/29/2024
Version: 14.5
Replaces version: 14.4
Language: en-US
Date of first version:10/5/2015
Page: 4 of 8
8. Exposure controls / personal protection
Exposure guidelines
Occupational exposure limit values:
Type Limit value
USA: ACGIH: TWA 10 mg/m (Dust limit value, inhalable fraction)
USA: ACGIH: TWA 3 mg/m (Dust limit value, respirable fraction)
USA: OSHA: TWA 15 mg/m (Dust limit value, total dust)
USA: OSHA: TWA 5 mg/m (Dust limit value, respirable fraction)
Engineering controls
Provide good ventilation and/or an exhaust system in the work area.
In case of development of vapors or dust (at processing): Use local exhaust.
See also information in chapter 7, section storage.
Personal protection equipment (PPE)
Eye/face protection:At processing (recommended): Safety glasses in accordance with OSHA 29 CFR:
1910.133 or ANSI Z87.1-2010.
Skin protection: At processing (recommended): Wear suitable protective clothing.
Recommendation:
Protective gloves according to OSHA Standard – 29 CFR: 1910.138.
Glove material: nitrile rubber (0.11 mm)
Breakthrough time: 480 min.
Observe glove manufacturer’s instructions concerning penetrability and breakthrough time.
Respiratory protection:Respiratory protection is not necessary if room is well ventilated.
At processing:
When vapors form, use respiratory protection. The filter class must be suitable for the
maximum contaminant concentration (gas/vapor/aerosol/particulates) that may arise
when handling the product. If the concentration is exceeded, self-contained breathing
apparatus must be used.
General hygiene considerations:
Handle in accordance with good industrial hygiene and safety practice. Wash hands
before breaks and after work. When using do not eat, drink or smoke.
At processing:
Avoid contact with skin, eyes, and clothing. Do not breathe vapors. Do not breathe dust.
Environmental exposure controls
Refer to 6.: Section “Environmental precautions”.
9. Physical and chemical properties
Information on basic physical and chemical properties
Appearance: Form: solid
Color: varying
Odor: odorless
Odor threshold: No data available
pH: No data available
printed by Airtech Advanced Materials Group with Qualisys SUMDAT
Safety information sheet
Voluntary product information following the Safety Data Sheet format
Resin Infusion Products
Material number 1074
Revision date: 8/29/2024
Version: 14.5
Replaces version: 14.4
Language: en-US
Date of first version:10/5/2015
Page: 5 of 8
Melting point/freezing point: 212 – 500 F
Initial boiling point and boiling range:No data available
Flash point/flash point range: No data available
Evaporation rate: No data available
Flammability: This material is combustible, but will not ignite readily.
Explosion limits: No data available
Vapor pressure: No data available
Vapor density: No data available
Density: No data available
Water solubility: at 68 F: insoluble
Partition coefficient: n-octanol/water:No data available
Auto-ignition temperature: No data available
Thermal decomposition: No data available
Additional information: No data available
10. Stability and reactivity
Reactivity: Refer to section: Possibility of hazardous reactions.
Chemical stability: Stable under recommended storage conditions.
Possibility of hazardous reactions:
No dangerous reactions with proper and specified storage and handling
Conditions to avoid:Keep away from heat. Protect from direct sunlight. Avoid generation of dust. Avoid the
formation of aerosol/vapors.
Incompatible materials:Strong acids, strong oxidizing agents.
Hazardous decomposition products:
Caprolactam, nitrogen oxides (NOx), amines, carbon monoxide and carbon dioxide
Thermal decomposition:No data available
printed by Airtech Advanced Materials Group with Qualisys SUMDAT
Safety information sheet
Voluntary product information following the Safety Data Sheet format
Resin Infusion Products
Material number 1074
Revision date: 8/29/2024
Version: 14.5
Replaces version: 14.4
Language: en-US
Date of first version:10/5/2015
Page: 6 of 8
11. Toxicological information
Toxicological tests
Toxicological effects:Acute toxicity (oral): Lack of data.
Acute toxicity (dermal): Lack of data.
Acute toxicity (inhalative): Lack of data.
Skin corrosion/irritation: Lack of data.
Serious eye damage/irritation: Lack of data.
Sensitisation to the respiratory tract: Lack of data.
Skin sensitisation: Lack of data.
Germ cell mutagenicity/Genotoxicity: Lack of data.
Carcinogenicity: Lack of data.
Reproductive toxicity: Lack of data.
Effects on or via lactation: Lack of data.
Specific target organ toxicity (single exposure): Lack of data.
Specific target organ toxicity (repeated exposure): Lack of data.
Aspiration hazard: Lack of data.
Other information: Toxic fumes may be emitted at elevated temperatures. Processing, e.g. by cutting,
sawing or grinding, can produce particles and dust. Dust may irritate airways and cause
bronchitis symptoms.
Information about Caprolactam: Harmful if swallowed. Harmful if inhaled. Causes skin
irritation. Causes serious eye irritation. May cause respiratory irritation.
Symptoms
In case of inhalation:
Inhalation of dust may cause irritation of the respiratory system. Overheating released
mist or vapors can irritate the respiratory tracts.
Other symptoms: Cough, respiratory complaints, dizziness, nausea, vomiting.
After contact with skin: The melted product can cause severe burns.
After eye contact:
Process vapors can irritate the eyes. Dust contact with the eyes can lead to mechanical
irritation.
12. Ecological information
Ecotoxicity
Further details: No data available
Mobility in soil
No data available
Persistence and degradability
Further details: Product is not biodegradable.
Additional ecological information
General information:Avoid release to the environment.
printed by Airtech Advanced Materials Group with Qualisys SUMDAT
Safety information sheet
Voluntary product information following the Safety Data Sheet format
Resin Infusion Products
Material number 1074
Revision date: 8/29/2024
Version: 14.5
Replaces version: 14.4
Language: en-US
Date of first version:10/5/2015
Page: 7 of 8
13. Disposal considerations
Product
Recommendation: Dispose of waste according to applicable legislation.
Package
Waste key number:
15 01 01 =paper and cardboard packaging or 150102 = Plastic packaging
Recommendation: Dispose of waste according to applicable legislation. Non-contaminated packages may be
recycled.
14. Transport information
UN number
ADR/RID, IMDG, IATA-DGR:
not applicable
UN proper shipping name
ADR/RID, IMDG, IATA-DGR:
Not restricted
Transport hazard class(es)
ADR/RID, IMDG, IATA-DGR:
not applicable
Packing group
ADR/RID, IMDG, IATA-DGR:
not applicable
Environmental hazards
Marine pollutant: no
Transport in bulk according to Annex II of MARPOL 73/78 and the IBC Code
No data available
USA: Department of Transportation (DOT)
Proper shipping name: Not restricted
Sea transport (IMDG)
Proper shipping name:: Not restricted
Marine pollutant: no
Air transport (IATA)
Proper shipping name:: Not restricted
Further information
No dangerous good in sense of these transport regulations.
printed by Airtech Advanced Materials Group with Qualisys SUMDAT
Safety information sheet
Voluntary product information following the Safety Data Sheet format
Resin Infusion Products
Material number 1074
Revision date: 8/29/2024
Version: 14.5
Replaces version: 14.4
Language: en-US
Date of first version:10/5/2015
Page: 8 of 8
15. Regulatory information
National regulations – U.S. Federal Regulations
This product is an article as defined by TSCA regulations, and is exempt from TSCA
inventory listing requirements.
National regulations – U.S. State Regulations
No data available
National regulations – Great Britain
Hazchem-Code: –
16. Other information
Hazard rating systems:
1
10
NFPA Hazard Rating:
Health: 1 (Slight)
Fire: 1 (Slight)
Reactivity: 0 (Minimal)
HEALTH 1
FLAMMABILITY 1
PHYSICAL HAZARD 0
X
HMIS Version III Rating:
Health: 1 (Slight)
Flammability: 1 (Slight)
Physical Hazard: 0 (Minimal)
Personal Protection: X = Consult your supervisor
Abbreviations and acronyms:
ADN: European Agreement concerning the International Carriage of Dangerous Goods by Inland Waterways
ADR: European Agreement concerning the International Carriage of Dangerous Goods by Road
CAS: Chemical Abstracts Service
CFR: Code of Federal Regulations
CLP: Classification, Labelling and Packaging
DMEL: Derived minimal effect level
DNEL: Derived no-effect level
EC: European Community
EN: European Standard
EQ: Excepted quantities
IATA: International Air Transport Association
IATA-DGR: International Air Transport Association Dangerous Goods Regulations
IBC Code: International Code for the Construction and Equipment of Ships carrying Dangerous Chemicals in Bulk
IMDG Code: International Maritime Dangerous Goods Code
MARPOL: Maritime Pollution: The International Convention for the Prevention of Pollution from Ships
OSHA: Occupational Safety and Health Administration
PBT: Persistent, bioaccumulative and toxic
PNEC: Predicted no-effect concentration
RID: Regulations Concerning the International Carriage of Dangerous Goods by Rail
TRGS: Technical Rules for Hazardous Substances
TSCA: Toxic Substance Control Act
vPvB: Very persistent and very bioaccumulative
Reason of change: Changes in section 1: Changes of product list
Department issuing data sheet
Contact person: see section 1: Department responsible for information
This data sheet cannot cover all possible situations which the user may experience during processing. Each aspect of your operation should be
examined to determine if, and which additional precautions may be necessary. All health and safety information contained in this data sheet should be
provided to your employees and customers. It is your responsibility to develop appropriate workplace instructions and training programs for employees.
As the conditions and methods of use are beyond our control, we do not assume any responsibility and expressly disclaim any liability for any use of
this product. The information supplied on this safety data sheet complies with our current level of knowledge as well as with national and EU
regulations. All statements or suggestions are made without warranty, expressed or implied, regarding accuracy of information, the hazards connected
with the use of the product or the results to be obtained from the use thereof.
printed by Airtech Advanced Materials Group with Qualisys SUMDAT
by | Sep 27, 2025
page 1 of 1
date of creation: 17 January 2020
Product Safety Information
Safe use, handling and storage
Flow Media FM-VI10
Due to the physical and chemical characteristics of the Flow Media VI10, the product can be
considered as an Article along with ECHA and EPA guidelines.
PRODUCT CHARACTERISTICS
Extruded plastic net
Polypropylene Homopolymer
Physical State at 20 C: Solid
Odour: Odourless
Melting range ( C): 160 to 165
Flash Point ( C): > 300
Flammability ( C): > 300
Relative Density at 20 C: 0.905
Solubility in Water: Insoluble
Viscosity: Not applicable
FIRE FIGHTING MEASURES
ExtinguishableMedia:CarbonDioxideorpowder,foam.Donotusewaterjetssincetheycouldhelp
to spread the flames.
Hazardous decomposition Products:
*Complete Combustion: carbon dioxide (CO2) and water vapour
*Partial combustion: form also carbon monoxide (CO), soot and cracked products like aldehydes,
ketones, acetone, acetaldehyde, formaldehyde, acrolein, hydrocarbons and volatile fatty acids
STORAGE AND USE
Store at ambient temperatures (we recommend between 5 C to 30 C).
Do not store the products near highly flammable materials and store them away from heating sources.
Avoid static electricity build-up with connection to earth. Store in a dry, well-ventilated area.
Prolonged storage should preferably be out of the sun or other sources of radiation.
Recommended use temperature: -20 C to 80 C
Avoid contact with strong oxidizing materials and fluorine. Avoid proximity or contact with flames and
sparks. It is recommended not to heat at a temperature higher than 110 C.
DISPOSAL CONSIDERATIONS
Theproductiscompletelyrecyclableandnon-toxic.Itshouldbeusedaccordingtogoodworking
practiceswithoutdisposingofitintheenvironment.Theproductispersistentintheenvironment.Itis
not biodegradable.
Prepared By: PM Product Regulatory Affairs Specialist; E-mail: ilaria.tortone@solvay.com
All above pieces of information are considered to be correct and given in good faith. The information contained is based on our
knowledge of the products at the date of publishing. Users are advised of possible additional hazards when the products are used in
applications for which they were not intended. This sheet shall only be used and reproduced for prevention and security purposes.
