by | Sep 27, 2025
SDS: 0059127
Date Prepared: 02/05/2017
SAFETY DATA SHEET
1. IDENTIFICATION
Product Name: ETFE Film/Fabric/Felt
Product Description: Ethylene/Tetrafluoroethylene Copolymer
Synonyms: Make sure OPN names are listed in section 1 of the MSDS
Chemical Family: Ethylene/Tetrafluoroethylene Copolymer
Molecular Weight: Not available
Intended/Recommended Use: Film
Other Product Names: A6000, A6200, A6200 BLUE, A6200 CLEAR, A6200 RED, A6200M.
This SDS covers multiple products. For industrial exposure and emergency
response purposes, all listed products above have similar physical, chemical and
hazard properties.
CYTEC INDUSTRIES INC., 504 CARNEGIE CENTER, PRINCETO N, NEW JERSEY 08540, USA
For Product and all Non-Emergency Information call 1-800/652-6013. Outside the USA and Canada call 1-973/357-
3193.
EMERGENCY PHONE (24 hours/day) – For emergency only involving spill, leak, fire, exposure or accident call:
Asia Pacific:
Australia – +61 2 8014 4558 (Carechem24)
China (PRC) – +86 0532 83889090 (NRCC) +86 512 8090 3042 (Carechem24)
New Guinea – +61 2 8014 4558 (Carechem24)
New Zealand – +64 9 929 1483 (Carechem24)
India, Japan, Korea, Malaysia, Thailand – +65 3158 1074 (Carechem24 Singapore)
India (Hindi Speaking Only) – +65 3158 1198 or 000800 100 7479 (Carechem24 Singapore)
Canada: 800 424 9300 (Within US,Canada) +1 (703) 527-3887 (International) (CHEMTREC)
Europe/Africa/Middle East (Carechem24 UK):
Europe, Middle East, Africa, Israel – +44 1235 239 670
(Arabic speaking countries) – +44 1235 239 671
Latin America:
Brazil – +55 11 3197 5891 (Carechem24)
Chile – +56 2 2582 9336 (Carechem24)
All Others – +44 1235 239 670 (Carechem24 UK)
USA: 800 424 9300 (Within US,Canada) +1 (703) 527-3887 (International) (CHEMTREC)
2. HAZARDS IDENTIFICATION
GHS Classification
Not Classified
LABEL ELEMENTS
Not Applicable
Hazard Statements
Not Applicable
Precautionary Statements
Not Applicable
Hazards Not Otherwise Classified (HNOC), Other Hazards
Not applicable
3. COMPOSITION/INFORMATION ON INGREDIENTS
Substance, Mixture or Article?Article
HAZARDOUS INGREDIENTS
No Hazardous Ingredients
Additional GHS classification or other information may be included in this section but has not been adopted by OSHA.
See Section 16 for full text of H phrases.
4. FIRST AID MEASURES
DESCRIPTION OF FIRST AID MEASURES
Eye Contact:
Not an expected route of exposure.
Skin Contact:
Wash immediately with plenty of water and soap.
Ingestion:
Not an expected route of exposure.
Inhalation:
Material is not expected to be harmful if inhaled. Remove to fresh air.
MOST IMPORTANT SYMPTOMS AND EFFECTS, BOTH ACUTE AND DELAYED
None known
INDICATION OF ANY IMMEDIATE MEDICAL ATTENTION AND SPECIAL TREATMENT NEEDS
Not applicable
5. FIRE-FIGHTING MEASURES
Suitable Extinguishing Media:
Use water spray or fog, carbon dioxide or dry chemical.
Extinguishing Media to Avoid:
full water jet.
Protective Equipment:
Firefighters, and others exposed, wear self-contained breathing apparatus.
Special Hazards:
None known
Page 2 of 7ETFE Film/Fabric/Felt SDS: 0059127 Date Prepared: 02/05/2017
6. ACCIDENTAL RELEASE MEASURES
Personal precautions:
Refer to Section 8 (Exposure Controls/Personal Protection) for appropriate personal protective equipment.
Methods For Cleaning Up:
Sweep up into containers for disposal. Flush spill area with water.
References to other sections:
See Sections 8 and 13 for additional information.
7. HANDLING AND STORAGE
HANDLING
Precautions: None
Special Handling Statements: None
STORAGE
Store in accordance with local, state, and federal regulations.
Storage Temperature: Room temperature
Reason: Quality.
8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Engineering Measures:
Engineering controls are not usually necessary if good hygiene practices are followed.
Respiratory Protection:
None recommended
Eye Protection:
Wear eye/face protection.
Skin Protection:
Avoid skin contact. Wear impermeable gloves.
Hand Protection:
Wear impermeable gloves. Replace gloves immediately when torn or any change in appearance (dimension, colour,
flexibility etc) is noticed.
Additional Advice:
Before eating, drinking, or smoking, wash face and hands thoroughly with soap and water.
Exposure Limit(s)
The below constituents are the only constituents of the product which have a PEL, TLV or other recommended exposure
limit. At this time, the other constituents have no known exposure limits.
No values have been established.
9. PHYSICAL AND CHEMICAL PROPERTIES
Color: various
Appearance: film
ETFE Film/Fabric/Felt SDS: 0059127 Date Prepared: 02/05/2017 Page 3 of 7
9. PHYSICAL AND CHEMICAL PROPERTIES
Odor: odorless
Boiling Point: Not available
Melting Point: 230 – 280 C 446 – 536 F
Vapor Pressure: Not available
Specific Gravity/Density: Not available
Vapor Density: Not available
Percent Volatile (% by wt.): Not available
pH: Not available
Saturation In Air (% By Vol.):Not available
Evaporation Rate: Not available
Solubility In Water: Insoluble
Volatile Organic Content: Not available
Flash Point: ~470 C 878 F
Flammability (solid, gas): Not available
Flammable Limits (% By Vol): Not available
Autoignition (Self) Temperature:Not available
Decomposition Temperature: >270 C 518 F
Partition coefficient (n-
octanol/water):
Not available
Odor Threshold: Not available
Viscosity (Kinematic): Not available
DUST HAZARD INFORMATION
Particle Size (microns): Not applicable
Kst (bar-m/sec): Not applicable
Maximum Explosion Pressure (Pmax): Not applicable
Dust Class: Not applicable
Minimum Ignition Energy (MIE) (mJ): Not applicable
Minimum Ignition Temperature (MIT) ( C): Not applicable
Minimum Explosive Concentration (MEC) (g/m
3
): Not applicable
Limiting Oxygen Concentration (LOC) (%): Not applicable
10. STABILITY AND REACTIVITY
Reactivity: No information available
Stability: Stable
Conditions To Avoid: Avoid exposure to heat.
Polymerization: Will not occur
Materials To Avoid: fluorine
oxidizers
Alkali metals
Hazardous Decomposition
Products:
carbonyl fluoride
perfluorolefins
Hydrogen fluoride
Carbon monoxide and carbon dioxide
11. TOXICOLOGICAL INFORMATION
PRODUCT TOXICITY INFORMATION
Likely Routes of Exposure: Skin.
Page 4 of 7ETFE Film/Fabric/Felt SDS: 0059127 Date Prepared: 02/05/2017
ACUTE TOXICITY DATA
LOCAL EFFECTS ON SKIN AND EYE
ALLERGIC SENSITIZATION
GENOTOXICITY
Assays for Gene Mutations
OTHER INFORMATION
The product toxicity information above has been estimated.
HAZARDOUS INGREDIENT TOXICITY DATA
This product contains no OSHA regulated (hazardous) components.
California Proposition 65 Warning (applicable in California only) – This product contains (a) chemical(s) known to the State
of California to cause cancer.
12. ECOLOGICAL INFORMATION
TOXICITY, PERSISTENCE AND DEGRADABI LITY, BIOACCUMULATIVE POTENTIAL, MOBILITY IN SOIL, OTHER
ADVERSE EFFECTS
This material is not classified as dangerous for the environment.
Environmental exposure from substances of this preparation are limited due to the physical form of the product.
RESULTS OF PBT AND vPvB ASSESSMENT
Not determined
HAZARDOUS INGREDIENT TOXICITY DATA
rat
No data
Acute LC50
4 hr .Not an expected route of
exposure
ETFE Film/Fabric/Felt
rat
Acute Irritation
Acute LD50
skin Not irritating
SDS: 0059127
.Not an expected route of
exposure
Acute Irritation eye Not irritating
dermal
Date Prepared: 02/05/2017
Sensitization
rabbit
skin Not sensitizing
Acute LD50
Sensitization respiratory
.>2000 mg/kg
No data
Page 5 of 7
inhalation
oral
Ames Salmonella Assay
No Hazardous Ingredients
13. DISPOSAL CONSIDERATIONS
The information on RCRA waste classification and disposal methodology provided below applies only to the product, as
supplied. If the material has been altered or contaminated, or it has exceeded its recommended shelf life, the guidance
may be inapplicable. Hazardous waste classification under federal regulations (40 CFR Part 261 et seq) is dependent
upon whether a material is a RCRA “listed hazardous waste” or has any of the four RCRA “hazardous waste
characteristics.” Refer to 40 CFR Part 261.33 to determine if a given material to be disposed of is a RCRA “listed
hazardous waste”; information contained in Section 15 of this MSDS is not intended to indicate if the product is a “listed
hazardous waste.” RCRA Hazardous Waste Characteristics: There are four characteristics defined in 40 CFR Section
261.21-61.24: Ignitability, Corrosivity, Reactivity, and Toxicity. To determine Ignitability, see Section 9 of this MSDS
(flash point). For Corrosivity, see Sections 9 and 14 (pH and DOT corrosivity). For Reactivity, see Section 10
(incompatible materials). For Toxicity, see Section 3 (composition). Federal regulations are subject to change. State and
local requirements, which may differ from or be more stringent than the federal regulations, may also apply to the
classification of the material if it is to be disposed. The Company encourages the recycle, recovery and reuse of
materials, where permitted, as an alternate to disposal as a waste. The Company recommends that organic materials
classified as RCRA hazardous wastes be disposed of by thermal treatment or incineration at EPA approved facilities.
The Company has provided the foregoing for information only; the person generating the waste is responsible for
determining the waste classification and disposal method.
14. TRANSPORT INFORMATION
This section provides basic shipping classification information. Refer to appropriate transportation regulations for specific
requirements.
US DOT
Dangerous Goods? Not applicable/Not regulated
TRANSPORT CANADA
Dangerous Goods? Not applicable/Not regulated
ICAO / IATA
Dangerous Goods? Not applicable/Not regulated
IMO
Dangerous Goods? Not applicable/Not regulated
_____________________________________________________________________________
15. REGULATORY INFORMATION
Inventory Information
United States (USA): All components of this product are included on the TSCA Chemical Inventory or are not
required to be listed on the TSCA Chemical Inventory.
Canada: All components of this product are included on the Domestic Substances List (DSL) or are not required to
be listed on the DSL.
Australia: All components of this product are included in the Australian Inventory of Chemical Substances (AICS)
or are not required to be listed on AICS.
Date Prepared: 02/05/2017 Page 6 of 7ETFE Film/Fabric/Felt SDS: 0059127
China: All components of this product are included on the Chinese inventory or are not required to be listed on the
Chinese inventory.
Japan: All components of this product are included on the Japanese (ENCS) inventory or are not required to be
listed on the Japanese inventory.
Korea: All components of this product are included on the Korean (ECL) inventory or are not required to be listed
on the Korean inventory.
Philippines: All components of this product are included on the Philippine (PICCS) inventory or are not required to
be listed on the Philippine inventory.
Taiwan: All components of this product are included on the Taiwan Chemical Substance Inventory (TCSI) or are
not required to be listed on the Taiwan inventory.
OTHER ENVIRONMENTAL INFORMATION
The following components of this product may be subject to reporting requirements pursuant to Section 313 of CERCLA
(40 CFR 372), Section 12(b) of TSCA, or may be subject to release reporting requirements (40 CFR 307, 40 CFR 311,
etc.) See Section 13 for information on waste classification and waste disposal of this product.
This product does not contain any components regulated under these sections of the EPA
PRODUCT HAZARD CLASSIFICATION UNDER SECTION 311 OF SARA
Not applicable
_____________________________________________________________________________
16. OTHER INFORMATION
NFPA Hazard Rating (National Fire Protection Association)
Health: 1 – Materials that, under emergency conditions, can cause significant irritation.
Fire: 1 – Materials that must be preheated before ignition can occur.
Instability: 0 – Materials that in themselves are normally stable, even under fire exposure conditions.
Reasons For Issue: Revised Section 1
Date Prepared: 02/05/2017
Date of last significant revision:02/01/2017
Prepared By: Legal & Compliance Services; E-mail: custinfo@solvay.com
This information is given without any warranty or representation. We do not assume any legal responsibility for same, nor do we give permission,
inducement, or recommendation to practice any patented invention without a license. It is offered solely for your consideration, investigation, and
verification. Before using any product, read its label.
Date Prepared: 02/05/2017 Page 7 of 7ETFE Film/Fabric/Felt SDS: 0059127
by | Sep 27, 2025
SDS: 0058590
Date Prepared: 03/02/2017
SAFETY DATA SHEET
1. IDENTIFICATION
Product Name:
Polyester Film/Fabric/Felt
Product Description: Polyester film Polyester fabric
Synonyms: None
Chemical Family: Polyethylene Terephthalate
Molecular Weight: Polymer
Intended/Recommended Use: other
Other Product Names: 4819 Breather, A3000-4, A3000-7, AB10 (Airbleed 10), AB100 (Airbleed 100),
RC3000-10, RC3000-10A, RC3000-10AFR, RC3000-10FR, RC3000-20, RC3000-
20A, RC3000-20AFR, RC3000-20FR, AB80, 70001, A3000E, AB10060, AB20,
P720X, G500, RC3000, 60001, 60001 PEEL PLY, A85PS, MYLARFILM31.50, 40000
Nylon 56180/060/0000, 60001 SRB, 60002 PEEL PLY, 60002 SRB SLIT, 60002
SRB, 60004 PEEL PLY, 60004 NATURAL PEEL PLY, 60004 SRB, 60005 PEEL
PLY, 60005 SRB, E7760, E7760W, F400, VP 204 PEEL PLY, D1500EV6.
This SDS covers multiple products. For industrial exposure and emergency
response purposes, all listed products above have similar physical, chemical and
hazard properties.
CYTEC INDUSTRIES INC., 504 CARNEGIE CENTER, PRINCETON, NEW JERSEY 08540, USA
For Product and all Non-Emergency Information call 1-800/652-6013. Outside the USA and Canada call 1-973/357-
3193.
EMERGENCY PHONE (24 hours/day) – For emergency only involving spill, leak, fire, exposure or accident call:
Asia Pacific:
Australia – +61 2 8014 4558 (Carechem24)
China (PRC) – +86 0532 83889090 (NRCC) +86 512 8090 3042 (Carechem24)
New Guinea – +61 2 8014 4558 (Carechem24)
New Zealand – +64 9 929 1483 (Carechem24)
India, Japan, Korea, Malaysia, Thailand – +65 3158 1074 (Carechem24 Singapore)
India (Hindi Speaking Only) – +65 3158 1198 or 000800 100 7479 (Carechem24 Singapore)
Canada: 800 424 9300 (Within US,Canada) +1 (703) 527-3887 (International) (CHEMTREC)
Europe/Africa/Middle East (Carechem24 UK):
Europe, Middle East, Africa, Israel – +44 1235 239 670
(Arabic speaking countries) – +44 1235 239 671
Latin America:
Brazil – +55 11 3197 5891 (Carechem24)
Chile – +56 2 2582 9336 (Carechem24)
All Others – +44 1235 239 670 (Carechem24 UK)
USA: 800 424 9300 (Within US,Canada) +1 (703) 527-3887 (International) (CHEMTREC)
2. HAZARDS IDENTIFICATION
GHS Classification
Not Classified
LABEL ELEMENTS
Not Applicable
Hazard Statements
Not Applicable
Precautionary Statements
Not Applicable
Hazards Not Otherwise Classified (HNOC), Other Hazards
By excessive exposure to dust, eye and respiratory tract irritation is possible.
3. COMPOSITION/INFORMATION ON INGREDIENTS
Substance, Mixture or Article?Article
HAZARDOUS INGREDIENTS
Component / CAS No. % GHS Classification Carcinogen
Titanium Dioxide
13463-67-7
0 – 1.0 Not Classified IARC 2B
The specific chemical identity and/or exact percentage of composition for one or more ingredients has been withheld as a
trade secret.
Additional GHS classification or other information may be included in this section but has not been adopted by OSHA.
See Section 16 for full text of H phrases.
4. FIRST AID MEASURES
DESCRIPTION OF FIRST AID MEASURES
Eye Contact:
Not an expected route of exposure.
Skin Contact:
Material is not expected to be harmful by skin contact. In case of skin contact, wash affected areas of skin with soap
and water.
Ingestion:
Not an expected route of exposure.
Inhalation:
Remove to fresh air. If breathing is difficult, give oxygen. Obtain medical advice if there are persistent symptoms.
MOST IMPORTANT SYMPTOMS AND EFFECTS, BOTH ACUTE AND DELAYED
None known
INDICATION OF ANY IMMEDIATE MEDICAL ATTENTION AND S PECIAL TREATMENT NEEDS
Not applicable
SDS: 0058590 Date Prepared: 03/02/2017 Page 2 of 8Polyester Film/Fabric/Felt
5. FIRE-FIGHTING MEASURES
Suitable Extinguishing Media:
Use water spray or fog, carbon dioxide or dry chemical.
Extinguishing Media to Avoid:
full water jet
Protective Equipment:
Firefighters, and others exposed, wear self-contained breathing apparatus.
Special Hazards:
None known
6. ACCIDENTAL RELEASE MEASURES
Personal precautions:
Refer to Section 8 (Exposure Controls/Personal Protection) for appropriate personal protective equipment.
Methods For Cleaning Up:
Sweep up into containers for disposal. Flush spill area with water.
References to other sections:
See Sections 8 and 13 for additional information.
7. HANDLING AND STORAGE
HANDLING
Precautions: None
Special Handling Statements: Heating or curing of unused rolls or sheets of product prior to disposal is not
recommended. Heating a large mass of product can lead to a rapid decomposition reaction, generating heat,
smoke and possibly fire. Provide good ventilation of working area (local exhaust ventilation if necessary).
STORAGE
Store in accordance with local, state, and federal regulations.
Storage Temperature: Room temperature
Reason: Quality.
8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Engineering Measures:
Engineering controls are not usually necessary if good hygiene practices are followed.
Respiratory Protection:
None recommended
Eye Protection:
Wear eye/face protection.
Skin Protection:
Avoid skin contact. Wear impermeable gloves.
Hand Protection:
Wear impermeable gloves. Consider the porosity and elasticity data of the glove manufacturer and the specific conditions
in the work place.
Polyester Film/Fabric/Felt SDS: 0058590 Date Prepare d: 03/02/2017 Page 3 of 8
Additional Advice:
Before eating, drinking, or smoking, wash face and hands thoroughly with soap and water.
Exposure Limit(s)
The below constituents are the only constituents of the product which have a PEL, TLV or other recommended exposure
limit. At this time, the other constituents have no known exposure limits.
9. PHYSICAL AND CHEMICAL PROPERTIES
Color: various
Appearance: film
Odor: odorless
Boiling Point: Not applicable
Melting Point: ~225 C 437 F
Vapor Pressure: Not applicable
Specific Gravity/Density: Not available
Vapor Density: Not applicable
Percent Volatile (% by wt.): Not applicable
pH: Not applicable
Saturation In Air (% By Vol.):Not applicable
Evaporation Rate: Not applicable
Solubility In Water: Insoluble
Volatile Organic Content: Not applicable
Flash Point: Not applicable
Flammability (solid, gas): Not available
Flammable Limits (% By Vol): Not applicable
Autoignition (Self) Temperature:Not applicable
Decomposition Temperature: >250 C 482 F
Partition coefficient (n-
octanol/water):
Not applicable
Odor Threshold: Not available
Viscosity (Kinematic): Not applicable
DUST HAZARD INFORMATION
Particle Size (microns): Not available
Kst (bar-m/sec): Not available
Maximum Explosion Pressure (Pmax): Not available
Dust Class: Not available
Minimum Ignition Energy (MIE) (mJ): Not available
Minimum Ignition Temperature (MIT) ( C): Not available
Minimum Explosive Concentration (MEC) (g/m
3
): Not available
Limiting Oxygen Concentration (LOC) (%): Not available
10. STABILITY AND REACTIVITY
Reactivity: No information available
Stability: Stable
Conditions To Avoid: None known
ACGIH (TLV): 10 mg/m
3
(TWA)
Date Prepared: 03/02/2017
Other Value: Not established
13463-67-7 Titanium Dioxide
Page 4 of 8Polyester Film/Fabric/Felt
OSHA (PEL): 15 mg/m
3
total dust (TWA)
SDS: 0058590
Polymerization: Will not occur
Conditions To Avoid: None known
Materials To Avoid: Strong oxidizing agents.
Strong acids and bases
Hazardous Decomposition
Products:
aldehydes
Carbon dioxide
hydrogen chloride
nitrogen oxides
water
Amine
ketones
soot
Carbon monoxide
11. TOXICOLOGICAL INFORMATION
PRODUCT TOXICITY INFORMATION
Likely Routes of Exposure: Skin.
ACUTE TOXICITY DATA
LOCAL EFFECTS ON SKIN AND EYE
ALLERGIC SENSITIZATION
GENOTOXICITY
Assays for Gene Mutations
OTHER INFORMATION
The product toxicity information above has been estimated.
HAZARDOUS INGREDIENT TOXICITY DATA
.Not an expected route of
exposure
Acute Irritation eye
Date Prepared: 03/02/2017
Not an expected route of
exposure
dermal
Sensitization
rabbit
skin Not sensitizing
Acute LD50
Sensitization
Page 5 of 8
respiratory
.No data
Not an expected route of
exposure
Polyester Film/Fabric/Felt
inhalation
oral
Ames Salmonella Assay
rat
No data
Acute LC50
4 hr
.Not an expected route of
exposure
SDS: 0058590
rat
Acute Irritation
Acute exposure to titanium dioxide dust is not likely to cause adverse effects. Chronic exposure to titanium dioxide may
cause some lung fibrosis. Inhalation of titanium dioxide dust at 50 times the nuisance dust level caused lung fibrosis and
a slight increase in lung tumor incidence in laboratory rats. When titanium dioxide was fed to rats and mice over lifetime in
a carcinogen bioassay, it was not carcinogenic.
Acute LD50
skin Not irritating
California Proposition 65 Warning (applicable in California only) – This product contains (a) chemical(s) known to the State
of California to cause cancer.
12. ECOLOGICAL INFORMATION
TOXICITY, PERSISTENCE AND DEGRADABILITY, BIOACCUMUL ATIVE POTENTIAL, MOBILITY IN SOIL, OTHER
ADVERSE EFFECTS
This material is not classified as dangerous for the environment.
Environmental exposure from substances of this preparation are limited due to the physical form of the product.
RESULTS OF PBT AND vPvB ASSESSMENT
Not determined
HAZARDOUS INGREDIENT TOXICITY DATA
Component / CAS No. Toxicity to Algae Toxicity to Fish Toxicity to Water Flea
Titanium Dioxide
13463-67-7
Not available Not available Not available
13. DISPOSAL CONSIDERATIONS
The information on RCRA waste classification and disposal methodology provided below applies only to the product, as
supplied. If the material has been altered or contaminated, or it has exceeded its recommended shelf life, the guidance
may be inapplicable. Hazardous waste classification under federal regulations (40 CFR Part 261 et seq) is dependent
upon whether a material is a RCRA “listed hazardous waste” or has any of the four RCRA “hazardous waste
characteristics.” Refer to 40 CFR Part 261.33 to determine if a given material to be disposed of is a RCRA “listed
hazardous waste”; information contained in Section 15 of this MSDS is not intended to indicate if the product is a “listed
hazardous waste.” RCRA Hazardous Waste Characteristics: There are four characteristics defined in 40 CFR Section
261.21-61.24: Ignitability, Corrosivity, Reactivity, and Toxicity. To determine Ignitability, see Section 9 of this MSDS
(flash point). For Corrosivity, see Sections 9 and 14 (pH and DOT corrosivity). For Reactivity, see Section 10
(incompatible materials). For Toxicity, see Section 3 (composition). Federal regulations are subject to change. State and
local requirements, which may differ from or be more stringent than the federal regulations, may also apply to the
classification of the material if it is to be disposed. The Company encourages the recycle, recovery and reuse of
materials, where permitted, as an alternate to disposal as a waste. The Company recommends that organic materials
classified as RCRA hazardous wastes be disposed of by thermal treatment or incineration at EPA approved facilities.
The Company has provided the foregoing for information only; the person generating the waste is responsible for
determining the waste classification and disposal method.
Date Prepared: 03/02/2017 Page 6 of 8Polyester Film/Fabric/Felt SDS: 0058590
14. TRANSPORT INFORMATION
This section provides basic shipping classification information. Refer to appropriate transportation regulations for specific
requirements.
US DOT
Dangerous Goods? Not applicable/Not regulated
TRANSPORT CANADA
Dangerous Goods? Not applicable/Not regulated
ICAO / IATA
Dangerous Goods? Not applicable/Not regulated
IMO
Dangerous Goods? Not applicable/Not regulated
___________________________________________________ __________________________
15. REGULATORY INFORMATION
Inventory Information
United States (USA): All components of this product are included on the TSCA Chemical Inventory or are not
required to be listed on the TSCA Chemical Inventory.
Canada: All components of this product are included on the Domestic Substances List (DSL) or are not required to
be listed on the DSL.
European Economic Area (including EU): This product is an article that does not intentionally release substances
under normal conditions of use and is therefore exempt from the registration requirements under the REACH
Regulation (EC) No. 1907/2006.
Australia: All components of this product are included in the Australian Inventory of Chemical Substances (AICS)
or are not required to be listed on AICS.
China: All components of this product are included on the Chinese inventory or are not required to be listed on the
Chinese inventory.
Japan: All components of this product are included on the Japanese (ENCS) inventory or are not required to be
listed on the Japanese inventory.
Korea: All components of this product are included on the Korean (ECL) inventory or are not required to be listed
on the Korean inventory.
Philippines: All components of this product are included on the Philippine (PICCS) inventory or are not required to
be listed on the Philippine inventory.
Taiwan: All components of this product are included on the Taiwan Chemical Substance Inventory (TCSI) or are
not required to be listed on the Taiwan inventory.
OTHER ENVIRONMENTAL INFORMATION
The following components of this product may be subject to reporting requirements pursuant to Section 313 of CERCLA
(40 CFR 372), Section 12(b) of TSCA, or may be subject to release reporting requirements (40 CFR 307, 40 CFR 311,
etc.) See Section 13 for information on waste classification and waste disposal of this product.
This product does not contain any components regulated under these sections of the EPA
Page 7 of 8Polyester Film/Fabric/Felt SDS: 0058590 Date Prepare d: 03/02/2017
PRODUCT HAZARD CLASSIFICATION UNDER SECTION 311 OF SARA
Not applicable
___________________________________________________ __________________________
16. OTHER INFORMATION
NFPA Hazard Rating (National Fire Protection Association)
Health: 1 – Materials that, under emergency conditions, can cause significant irritation.
Fire: 1 – Materials that must be preheated before ignition can occur.
Instability: 0 – Materials that in themselves are normally stable, even under fire exposure conditions.
Reasons For Issue: Revised Section 1
Date Prepared: 03/02/2017
Date of last significant revision:03/02/2017
Prepared By: Legal & Compliance Services; E-mail: custinfo@solvay.com
This information is given without any warranty or representation. We do not assume any legal responsibility for same, nor do we give permission,
inducement, or recommendation to practice any patented invention without a license. It is offered solely for your consideration, investigation, and
verification. Before using any product, read its label.
Page 8 of 8Polyester Film/Fabric/Felt SDS: 0058590 Date Prepare d: 03/02/2017
by | Sep 27, 2025
SDS: 0059106
Date Prepared: 02/09/2018
SAFETY DATA SHEET
1.IDENTIFICATION
Product Name: Nylon Film/Fabric/Felt
Product Description: Nylon film
Synonyms: None
Chemical Family: Nylon film
Molecular Formula: Not applicable
Molecular Weight: Not applicable
Intended/Recommended Use: Tooling
Other Product Names: HS8171, HS8171 6/66, 58179, 51789SRB, SV2000, VINYL SPIRAL WRAP,
A100PS, 51789.I.O, 51789.NAT, B100, B100BLEU, HS6262, VAC PAK HS6262,
D300, AB40, AB40N, A100FLOGREEN, MQ251, 41661, 52006, 52008 , B-100,
B4444, VAC PAK HS800.
This SDS covers multiple products. For industrial exposure and emergency
response purposes, all listed products above have similar physical, chemical and
hazard properties.
2. HAZARDS IDENTIFICATION
GHS Classification
Not Classified
LABEL ELEMENTS
Not Applicable
Manufacturer/Supplier product and non-emergency information:
Aerovac LLC
955-10 National Parkway, Schaumburg, Il 60173, USA
800-621-8003 (USA/Canada), +1-847-437-0200 (International)
E-mail: hse@compositesone.com
Aerovac Mondov S.r.L.
Via Vigevano 1, 12084 Mondovi, ITALY
+39 (0) 174 566200
Aerovac Toulouse SAS
1 rue de la Sausse, 31240 Saint Jean, FRANCE
+33 (0) 5 61 378989
Aerovac Keighley Ltd
500 Bradford Road, Sandbeds, Keighley, BD20 5NG, UK
+44 (0) 1274 550500
Composites One Canada ULC
1100 Rue Parent Rd, Suite 200, Saint-Bruno, QC J3V 6L8, CANADA+1-450-678-3330
EMERGENCY 24-Hour Phone Number:
CHEMTREC 800-424-9300 USA and Canada / +1-703-527-3887 International
Hazard Statements
Not Applicable
Precautionary Statements
Not Applicable
Hazards Not Otherwise Classified (HNOC), Other Hazards
By excessive exposure to dust, eye and respiratory tract irritation is possible.
3. COMPOSITION/INFORMATION ON INGREDIENTS
Substance, Mixture or Article Article
HAZARDOUS INGREDIENTS
Component / CAS No. % GHS Classification Carcinogen
Caprolactam
105-60-2
1 – 5 Acute Tox. 4 (H302)
Acute Tox. 4 (H332)
STOT SE 3 (H335)
Skin Irrit. 2 (H315)
Eye Irrit. 2A (H319)
–
The specific chemical identity and/or exact percentage of composition for one or more ingredients has been withheld as a
trade secret.
Additional GHS classification or other information may be included in this section but has not been adopted by OSHA.
See Section 16 for full text of H phrases.
4. FIRST AID MEASURES
DESCRIPTION OF FIRST AID MEASURES
Eye Contact:
Not an expected route of exposure.
Skin Contact:
Wash immediately with plenty of water and soap.
Ingestion:
Not an expected route of exposure.
Inhalation:
Remove to fresh air. If breathing is difficult, give oxygen. Obtain medical advice if there are persistent symptoms.
MOST IMPORTANT SYMPTOMS AND EFFECTS, BOTH ACUTE AND DELAYED
None known
INDICATION OF ANY IMMEDIATE MEDICAL ATTENTION AND SPECIAL TREATMENT NEEDS
Not applicable
Page 2 of 8Nylon Film/Fabric/Felt SDS: 0059106 Date Prepared: 02/09/2018
5. FIRE-FIGHTING MEASURES
Suitable Extinguishing Media:
Use water spray or fog, carbon dioxide or dry chemical.
Extinguishing Media to Avoid:
full water jet.
Protective Equipment:
Firefighters, and others exposed, wear self-contained breathing apparatus.
Special Hazards:
None known
6. ACCIDENTAL RELEASE MEASURES
Personal precautions:
Refer to Section 8 (Exposure Controls/Personal Protection) for appropriate personal protective equipment.
Methods For Cleaning Up:
Sweep up into containers for disposal. Flush spill area with water.
References to other sections:
See Sections 8 and 13 for additional information.
7. HANDLING AND STORAGE
HANDLING
Precautions: None
Special Handling Statements: Heating or curing of unused rolls or sheets of product prior to disposal is not
recommended. Heating a large mass of product can lead to a rapid decomposition reaction, generating heat,
smoke and possibly fire. Provide good ventilation of working area (local exhaust ventilation if necessary).
STORAGE
Store in accordance with local, state, and federal regulations.
Storage Temperature: Room temperature
Reason: Quality.
8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Engineering Measures:
Engineering controls are not usually necessary if good hygiene practices are followed.
Respiratory Protection:
Where exposures are below the established exposure limit, no respiratory protection is required. Where exposures
exceed the established exposure limit, use respiratory protection recommended for the material and level of exposure.
Eye Protection:
Wear eye/face protection.
Skin Protection:
Avoid skin contact. Wear impermeable gloves.
Page 3 of 8Nylon Film/Fabric/Felt SDS: 0059106 Date Prepared: 02/09/2018
Hand Protection:
Wear impermeable gloves. Replace gloves immediately when torn or any change in appearance (dimension, colour,
flexibility etc) is noticed.
Additional Advice:
Before eating, drinking, or smoking, wash face and hands thoroughly with soap and water.
Exposure Limit(s)
The below constituents are the only constituents of the product which have a PEL, TLV or other recommended exposure
limit. At this time, the other constituents have no known exposure limits.
9. PHYSICAL AND CHEMICAL PROPERTIES
Color: color varies
Appearance: film, fabric or felt
Odor: none
Boiling Point: Not applicable
Melting Point: 215 – 265 C 420 – 509 F
Vapor Pressure: Not applicable
Specific Gravity/Density: Not available
Vapor Density: Not available
Percent Volatile (% by wt.): Not available
pH: Not applicable
Saturation In Air (% By Vol.):Not applicable
Evaporation Rate: Not applicable
Solubility In Water: negligible
Volatile Organic Content: Not available
Flash Point: >400 C 752 F
Flammability (solid, gas): Not available
Flammable Limits (% By Vol): Not available
Autoignition (Self) Temperature:>450 C 842 F
Decomposition Temperature: >350 C 662 F
Partition coefficient (n-
octanol/water):
Not available
Odor Threshold: Not available
Viscosity (Kinematic): Not available
DUST HAZARD INFORMATION
Particle Size (microns): Not available
Kst (bar-m/sec): Not available
Maximum Explosion Pressure (Pmax): Not available
Dust Class: Not available
Minimum Ignition Energy (MIE) (mJ): Not available
Minimum Ignition Temperature (MIT) ( C): Not available
Minimum Explosive Concentration (MEC) (g/m
3
): Not available
Limiting Oxygen Concentration (LOC) (%): Not available
10. STABILITY AND REACTIVITY
105-60-2 Caprolactam
SDS: 0059106
OSHA (PEL): Not established
Date Prepared: 02/09/2018
ACGIH (TLV): 5 mg/m
3
inhalable fraction and vapor (TWA)
Page 4 of 8
Other Value: Not established
Nylon Film/Fabric/Felt
10. STABILITY AND REACTIVITY
Reactivity: No information available
Stability: Stable
Polymerization: Will not occur
Conditions To Avoid: Avoid contact with sunlight or ultraviolet light. Avoid exposure to temperatures
exceeding recommended processing conditions.
Materials To Avoid: Strong acids or bases
Strong oxidizing agents.
Hazardous Decomposition
Products:
aldehydes
hydrogen cyanide (HCN)
nitrogen oxides
Amine
ketones
ammonia
Caprolactam
Carbon monoxide and carbon dioxide
Nitrites
11. TOXICOLOGICAL INFORMATION
PRODUCT TOXICITY INFORMATION
Likely Routes of Exposure: Skin.
ACUTE TOXICITY DATA
LOCAL EFFECTS ON SKIN AND EYE
ALLERGIC SENSITIZATION
GENOTOXICITY
Assays for Gene Mutations
OTHER INFORMATION
The product toxicity information above has been estimated.
HAZARDOUS INGREDIENT TOXICITY DATA
skin No data
.Not an expected route of
exposure
Acute Irritation eye
Date Prepared: 02/09/2018
Not an expected route of
exposure
dermal
Sensitization
rabbit
skin Not sensitizing
Acute LD50
Sensitization
Page 5 of 8
respiratory
.>2000 mg/kg
Not an expected route of
exposure
Nylon Film/Fabric/Felt
inhalation
oral
Ames Salmonella Assay
rat
No data
Acute LC50 4 hr .Not an expected route of
exposure
SDS: 0059106
rat
Acute Irritation
Acute LD50
12. ECOLOGICAL INFORMATION
TOXICITY, PERSISTENCE AND DEGRADABI LITY, BIOACCUMULATIVE POTENTIAL, MOBILITY IN SOIL, OTHER
ADVERSE EFFECTS
This material is not classified as dangerous for the environment.
Environmental exposure from substances of this preparation are limited due to the physical form of the product.
RESULTS OF PBT AND vPvB ASSESSMENT
Not determined
HAZARDOUS INGREDIENT TOXICITY DATA
Component / CAS No. Toxicity to Algae Toxicity to Fish Toxicity to Water Flea
Caprolactam
105-60-2
EC50 4320 – 4800 mg/L –
Pseudokirchneriella subcapitata
(72h)
EC50 = 130 mg/L –
Desmodesmus subspicatus (72h)
EC50 = 160 mg/L –
Desmodesmus subspicatus (96h)
LC50 = 1400 mg/L – Pimephales
promelas (96h) static
LC50 = 930 mg/L – Lepomis
macrochirus (96h) static
EC50 828 – 2920 mg/L –
Daphnia magna (48h)
EC50 > 500 mg/L – Daphnia
magna Straus (48h)
13. DISPOSAL CONSIDERATIONS
Page 6 of 8Nylon Film/Fabric/Felt SDS: 0059106 Date Prepared: 02/09/2018
Acute overexposure to caprolactam vapor may cause respiratory irritation. Dermal contact with caprolactam dust may
cause skin irritation. The oral (rat) and dermal (rabbit) LD50 values are 1.4-2.1 g/kg and 1.4 g/kg, respectively. The
acute inhalation (rat) 4-hr LC50 for a 50% (w/v) in water aerosol exposure was 8.16 mg/L (based on percent active LC50
is ~ 4mg/L). Exposure to caprolactam and ethyl alcohol has resulted in reddening of the skin.
13. DISPOSAL CONSIDERATIONS
The information on RCRA waste classification and disposal methodology provided below applies only to the product, as
supplied. If the material has been altered or contaminated, or it has exceeded its recommended shelf life, the guidance
may be inapplicable. Hazardous waste classification under federal regulations (40 CFR Part 261 et seq) is dependent
upon whether a material is a RCRA “listed hazardous waste” or has any of the four RCRA “hazardous waste
characteristics.” Refer to 40 CFR Part 261.33 to determine if a given material to be disposed of is a RCRA “listed
hazardous waste”; information contained in Section 15 of this MSDS is not intended to indicate if the product is a “listed
hazardous waste.” RCRA Hazardous Waste Characteristics: There are four characteristics defined in 40 CFR Section
261.21-61.24: Ignitability, Corrosivity, Reactivity, and Toxicity. To determine Ignitability, see Section 9 of this MSDS
(flash point). For Corrosivity, see Sections 9 and 14 (pH and DOT corrosivity). For Reactivity, see Section 10
(incompatible materials). For Toxicity, see Section 3 (composition). Federal regulations are subject to change. State and
local requirements, which may differ from or be more stringent than the federal regulations, may also apply to the
classification of the material if it is to be disposed. The Company encourages the recycle, recovery and reuse of
materials, where permitted, as an alternate to disposal as a waste. The Company recommends that organic materials
classified as RCRA hazardous wastes be disposed of by thermal treatment or incineration at EPA approved facilities.
The Company has provided the foregoing for information only; the person generating the waste is responsible for
determining the waste classification and disposal method.
14. TRANSPORT INFORMATION
This section provides basic shipping classification information. Refer to appropriate transportation regulations for specific
requirements.
US DOT
Dangerous Goods Not applicable/Not regulated
TRANSPORT CANADA
Dangerous Goods Not applicable/Not regulated
ICAO / IATA
Dangerous Goods Not applicable/Not regulated
IMO
Dangerous Goods Not applicable/Not regulated
_____________________________________________________________________________
15. REGULATORY INFORMATION
Inventory Information
United States (USA): All components of this product are included on the TSCA Chemical Inventory or are not
required to be listed on the TSCA Chemical Inventory.
Canada: All components of this product are included on the Domestic Substances List (DSL) or are not required to
be listed on the DSL.
European Economic Area (including EU): This product is an article that does not intentionally release substances
under normal conditions of use and is therefore exempt from the registration requirements under the REACH
Regulation (EC) No. 1907/2006.
Australia: All components of this product are included in the Australian Inventory of Chemical Substances (AICS)
or are not required to be listed on AICS.
China: All components of this product are included on the Chinese inventory or are not required to be listed on the
Chinese inventory.
Date Prepared: 02/09/2018 Page 7 of 8Nylon Film/Fabric/Felt SDS: 0059106
Japan: All components of this product are included on the Japanese (ENCS) inventory or are not required to be
listed on the Japanese inventory.
Korea: All components of this product are included on the Korean (ECL) inventory or are not required to be listed
on the Korean inventory.
Philippines: All components of this product are included on the Ph ilippine (PICCS) inventory or are not required to
be listed on the Philippine inventory.
Taiwan: All components of this product are included on the Taiwan Chemical Substance Inventory (TCSI) or are
not required to be listed on the Taiwan inventory.
OTHER ENVIRONMENTAL INFORMATION
The following components of this product may be subject to reporting requirements pursuant to Section 313 of CERCLA
(40 CFR 372), Section 12(b) of TSCA, or may be subject to release reporting requirements (40 CFR 307, 40 CFR 311,
etc.) See Section 13 for information on waste classification and waste disposal of this product.
This product does not contain any components regulated under these sections of the EPA
PRODUCT HAZARD CLASSIFICATION UNDER SECTION 311 OF SARA
Not applicable
_____________________________________________________________________________
16. OTHER INFORMATION
NFPA Hazard Rating (National Fire Protection Association)
Health: 1 – Materials that, under emergency conditions, can cause significant irritation.
Fire: 1 – Materials that must be preheated before ignition can occur.
Instability: 0 – Materials that in themselves are normally stable, even under fire exposure conditions.
Reasons For Issue: Revised Section 1
Date Prepared: 02/09/2018
Date of last significant revision:02/09/2018
Component Hazard Phrases
verification. Before using any product, read its label.
Date Prepared: 02/09/2018
Caprolactam
Page 8 of 8
H302 – Harmful if swallowed.
H315 – Causes skin irritation.
H319 – Causes serious eye irritation.
H332 – Harmful if inhaled.
H335 – May cause respiratory irritation.
Nylon Film/Fabric/Felt SDS: 0059106
Prepared By: Legal & Compliance Services; E-mail: hse@compositesone.com
Users Responsibility/Disclaimer of Liability
Information contained herein is believed to be true and accurate but all statements or suggestions are made without warranty, expressed or implied,
regarding accuracy of the information, the hazards connected with the use of the material or the results to be obtained from the use thereof.
Compliance with all applicable federal, state and local laws and local regulations remains the responsibility of the user. This safety data sheet
cannot cover all possible situations which the user may experience during processing. Each aspect of your operation should be examined to
determine if, or where, additional precautions may be necessary. All health and safety information contained in this safety data sheet should be
provided to your employees or customers. It is your responsibility to develop appropriate work practice guidelines and employee instructional
programs for your operation.
by | Sep 27, 2025
Safety information sheet
Voluntary product information following the Safety Data Sheet format
Bagging Films
Material number 1025
Revision date: 5/14/2020
Version: 7
Language: en-US
Date of first version:10/21/2014
Page: 1 of 8
1. Product and company identification
Product identifier
Trade name: Bagging Films
NBF125C, Big Blue L-100, Securlon V-45, Securlon L-500Y, Securlon L-1000,
Securlon L-2000, Securlon L2000 Embossed, Stretchlon 200, Stretchlon 700,
Stretchlon 800, Stretchlon 850, Stretchlon HT-350, Ipplon KM1300, Ipplon
DP1000, Ipplon DPT1000, Ipplon WN1500, Wrightlon 600V, Wrightlon 5400,
Wrightlon 6400, Wrightlon 7400, Wrightlon 8400, Dahlar Release Bag 125,
Dahlar Release Bag 375R, Dahlar Release Bag 460, Dahlar Release Bag 500,
Econolon, Airdraw 2, Thermalimide
Relevant identified uses of the substance or mixture and uses advised against
General use: Article: Vacuum bagging film
Details of the supplier of the safety data sheet
Company name:
Airtech International, Inc.
5700 Skylab Road
Huntington Beach, CA 92647
E-mail: airtech@airtechintl.com
Website: www.airtechonline.com
Telephone: +1 714.899.8100
Department responsible for
information:
Telephone: +1 714.899.8100
E-mail: airtech@airtechintl.com
Airtech Europe Sarl
Zone industrielle Haneboesch
L!4562 Differdange
Luxembourg
Website: www.airtech.lu
Telephone: +352 582.282
Department responsible for information:
Telephone: +352 582.282
E-mail: sales@airtech.lu
Tygavac Advanced Materials Ltd.
The Causeway
Broadway Business Park
Chadderton, Oldham
OL9 9XD United Kingdom
Website: www.tygavac.co.uk
Telephone: +44 161.947.1610
Department responsible for
information:
Telephone: +44 161.947.1610
E-mail: sales@tygavac.co.uk
Airtech Asia Ltd.
No. 161 of Anyuan Rd
Chagugang County
Wuqing District
301721, Tianjin, P.R. China
Website: www.airtech.asia
Telephone: +86 22 8862 9800
Telefax:: +86 22 8862 9900
Department responsible for information:
Telephone: +86 22 8862 9800
E-mail: airtech.asia@airtechasia.com.cn
Emergency phone number
CHEMTREC EMERGENCY PHONE:
Within USA/Canada: 1-(800)424-9300
International: +1 703-741-5970
2. Hazards identification
Emergency overview
Appearance: Form: solid
Color: varying
Odor: odorless
Classification: Article not subject to hazard labelling or classification.
printed by Airtech Advanced Materials Group with Qualisys SUMDAT
Safety information sheet
Voluntary product information following the Safety Data Sheet format
Bagging Films
Material number 1025
Revision date: 5/14/2020
Version: 7
Language: en-US
Date of first version:10/21/2014
Page: 2 of 8
Regulatory status
This material is not considered hazardous by the U.S. OSHA Hazard Communication
Standard (29 CFR 1910.1200).
Hazards not otherwise classified
Toxic fumes may be emitted at elevated temperatures. Do not breathe vapor. Processing,
e.g. by cutting, sawing or grinding, can produce particles and dust. Avoid inhalation of
dusts, as even inert dusts may functionally affect respiratory organs.
see section 11: Toxicological information
3. Composition / Information on ingredients
Chemical characterization:
Thermoplastic films
4. First aid measures
In case of inhalation:In case of inhalation of decomposition products, affected person should be moved into
fresh air and kept still. If the casualty has difficulty breathing, call a doctor immediately.
Following skin contact:After contact with molten product, cool skin area rapidly with cold water. Do not peel
solidified product off the skin. Seek medical attention.
After eye contact: In the event of irritation from processing vapors: Immediately flush eyes with plenty of
flowing water for 10 to 15 minutes holding eyelids apart. In case of troubles or persistent
symptoms, consult an opthalmologist.
After swallowing: Not a probable route of exposure.
In the case of the formation of dust: Rinse mouth. Seek medical treatment in case of
troubles.
Most important symptoms/effects, acute and delayed
In case of inhalation:
Inhalation of dust may cause irritation of the respiratory system. Overheating released
mist or vapors can irritate the respiratory tracts.
Other symptoms: Cough, respiratory complaints, dizziness, nausea, vomiting.
After contact with skin: The melted product can cause severe burns.
After eye contact:
Process vapors can irritate the eyes. Dust contact with the eyes can lead to mechanical
irritation.
Information to physician
Treat symptomatically.
5. Fire fighting measures
Flash point/flash point range:
No data available
Auto-ignition temperature:
No data available
Suitable extinguishing media:
Water spray jet, dry chemical powder, foam, carbon dioxide
Extinguishing media which must not be used for safety reasons:
Full water jet.
printed by Airtech Advanced Materials Group with Qualisys SUMDAT
Safety information sheet
Voluntary product information following the Safety Data Sheet format
Bagging Films
Material number 1025
Revision date: 5/14/2020
Version: 7
Language: en-US
Date of first version:10/21/2014
Page: 3 of 8
Specific hazards arising from the chemical
This material is combustible, but will not ignite readily. Toxic fumes may be emitted at
elevated temperatures.
In case of fire may be liberated: Caprolactam, nitrogen oxides (NOx), amines, carbon
monoxide and carbon dioxide, hydrogen cyanide, isocyanates, isocyanic acid.
Protective equipment and precautions for firefighters:
Wear a self-contained breathing apparatus and chemical protective clothing.
Additional information:Seal off endangered area. Cool endangered containers with water spray and, if possible,
remove from danger zone. Use a water fog to control vapors. Do not breathe fumes. Do
not allow fire water to penetrate into surface or ground water.
6. Accidental release measures
Personal precautions:Handle in accordance with good industrial hygiene and safety practice.
At processing: Avoid the formation of aerosol/vapors. Avoid generation of dust. Avoid
inhalation and contact with skin and eyes. Wear appropriate protective equipment. Keep
unprotected people away. Ensure adequate ventilation, especially in confined areas.
Environmental precautions:
Do not allow to penetrate into soil, waterbodies or drains.
Methods for clean-up:Take up mechanically, placing in appropriate containers for disposal. Dispose of waste
according to applicable legislation.
7. Handling and storage
Handling
Advices on safe handling:Handle in accordance with good industrial hygiene and safety practice.
At processing: Provide adequate ventilation, and local exhaust as needed. Avoid the
formation of aerosol/vapors. Avoid generation of dust. Avoid inhalation and contact with
skin and eyes. Wear appropriate protective equipment. Keep unprotected people away.
When using do not eat, drink or smoke.
Precautions against fire and explosion:
Take standard precautions to prevent fire.
Storage
Requirements for storerooms and containers:
Keep in a cool place. Keep container dry. Protect from direct sunlight. Keep away from
incompatible materials. Store at room temperature.
Hints on joint storage:Incompatible materials: Strong bases, strong acids, strong oxidizing agents.
Keep away from food and drinks.
8. Exposure controls / personal protection
Exposure guidelines
Occupational exposure limit values:
Type Limit value
USA: ACGIH: TWA 10 mg/m” (Dust limit value, inhalable fraction)
USA: ACGIH: TWA 3 mg/m” (Dust limit value, respirable fraction)
USA: OSHA: TWA 15 mg/m” (Dust limit value, inhalable fraction)
USA: OSHA: TWA 5 mg/m” (Dust limit value, respirable fraction)
printed by Airtech Advanced Materials Group with Qualisys SUMDAT
Safety information sheet
Voluntary product information following the Safety Data Sheet format
Bagging Films
Material number 1025
Revision date: 5/14/2020
Version: 7
Language: en-US
Date of first version:10/21/2014
Page: 4 of 8
Engineering controls
Provide good ventilation and/or an exhaust system in the work area.
In case of development of vapors or dust (at processing): Use local exhaust.
See also information in chapter 7, section storage.
Personal protection equipment (PPE)
Eye/face protection:At processing (recommended): Safety glasses in accordance with OSHA 29 CFR:
1910.133 or ANSI Z87.1-2010.
Skin protection: At processing (recommended): Wear suitable protective clothing.
Recommendation:
Protective gloves according to OSHA Standard – 29 CFR: 1910.138.
Glove material: nitrile rubber (0.11 mm)
Breakthrough time: 480 min.
Observe glove manufacturer’s instructions concerning penetrability and breakthrough time.
Respiratory protection:Respiratory protection is not necessary if room is well ventilated.
At processing:
When vapors form, use respiratory protection. The filter class must be suitable for the
maximum contaminant concentration (gas/vapor/aerosol/particulates) that may arise
when handling the product. If the concentration is exceeded, self-contained breathing
apparatus must be used.
General hygiene considerations:
Handle in accordance with good industrial hygiene and safety practice. Wash hands
before breaks and after work. When using do not eat, drink or smoke.
At processing:
Avoid contact with skin, eyes, and clothing. Do not breathe vapors. Do not breathe dust.
9. Physical and chemical properties
Information on basic physical and chemical properties
Appearance: Form: solid
Color: varying
Odor: odorless
Odor threshold: No data available
pH value: No data available
Melting point/freezing point: No data available
Initial boiling point and boiling range:No data available
Flash point/flash point range: No data available
Evaporation rate: No data available
Flammability: This material is combustible, but will not ignite readily.
Explosion limits: No data available
Vapor pressure: No data available
Vapor density: No data available
Density: No data available
Water solubility: at 68 #F: insoluble
Partition coefficient: n-octanol/water:No data available
Auto-ignition temperature: No data available
Thermal decomposition: No data available
Additional information: No data available
printed by Airtech Advanced Materials Group with Qualisys SUMDAT
Safety information sheet
Voluntary product information following the Safety Data Sheet format
Bagging Films
Material number 1025
Revision date: 5/14/2020
Version: 7
Language: en-US
Date of first version:10/21/2014
Page: 5 of 8
10. Stability and reactivity
Reactivity: Refer to section: Possibility of hazardous reactions.
Chemical stability:Stable under recommended storage conditions.
Possibility of hazardous reactions:
No dangerous reactions with proper and specified storage and handling
Conditions to avoid:Keep away from heat. Protect from direct sunlight. Avoid generation of dust. Avoid the
formation of aerosol/vapors.
Incompatible materials:Strong bases, strong acids, strong oxidizing agents.
Hazardous decomposition products:
Caprolactam, nitrogen oxides (NOx), amines, carbon monoxide and carbon dioxide,
hydrogen cyanide, isocyanates, isocyanic acid.
Thermal decomposition:No data available
11. Toxicological information
Toxicological tests
Toxicological effects:The statements are derived from the properties of the single components. No toxicological
data is available for the product as such.
Acute toxicity (oral): Lack of data.
Acute toxicity (dermal): Lack of data.
Acute toxicity (inhalative): Lack of data.
Skin corrosion/irritation: Lack of data.
Serious eye damage/irritation: Lack of data.
Sensitisation to the respiratory tract: Lack of data.
Skin sensitisation: Lack of data.
Germ cell mutagenicity/Genotoxicity: Lack of data.
Carcinogenicity: Lack of data.
Reproductive toxicity: Lack of data.
Effects on or via lactation: Lack of data.
Specific target organ toxicity (single exposure): Lack of data.
Specific target organ toxicity (repeated exposure): Lack of data.
Aspiration hazard: Lack of data.
Other information: Toxic fumes may be emitted at elevated temperatures. Processing, e.g. by cutting,
sawing or grinding, can produce particles and dust. Dust may irritate airways and cause
bronchitis symptoms.
Information about Caprolactam: Harmful if swallowed. Harmful if inhaled. Causes skin
irritation. Causes serious eye irritation. May cause respiratory irritation.
printed by Airtech Advanced Materials Group with Qualisys SUMDAT
Safety information sheet
Voluntary product information following the Safety Data Sheet format
Bagging Films
Material number 1025
Revision date: 5/14/2020
Version: 7
Language: en-US
Date of first version:10/21/2014
Page: 6 of 8
Symptoms
In case of inhalation:
Inhalation of dust may cause irritation of the respiratory system. Overheating released
mist or vapors can irritate the respiratory tracts.
Other symptoms: Cough, respiratory complaints, dizziness, nausea, vomiting.
After contact with skin: The melted product can cause severe burns.
After eye contact:
Process vapors can irritate the eyes. Dust contact with the eyes can lead to mechanical
irritation.
12. Ecological information
Ecotoxicity
Effects in sewage plants:The insoluble part can be precipitated mechanically in suitable sewage treatment plants.
Further details: No data available
Mobility in soil
No data available
Persistence and degradability
Further details: Product is not biodegradable.
Additional ecological information
General information:Do not allow to penetrate into soil, waterbodies or drains.
13. Disposal considerations
Product
Recommendation: Dispose of waste according to applicable legislation. Recycling or special waste
incineration.
Contaminated packaging
Recommendation: Dispose of waste according to applicable legislation. Non-contaminated packages may be
recycled.
14. Transport information
USA: Department of Transportation (DOT)
Proper shipping name: Not restricted
Sea transport (IMDG)
Proper shipping name: Not restricted
Marine pollutant: no
Air transport (IATA)
Proper shipping name: Not restricted
Further information
No dangerous good in sense of these transport regulations.
printed by Airtech Advanced Materials Group with Qualisys SUMDAT
Safety information sheet
Voluntary product information following the Safety Data Sheet format
Bagging Films
Material number 1025
Revision date: 5/14/2020
Version: 7
Language: en-US
Date of first version:10/21/2014
Page: 7 of 8
15. Regulatory information
National regulations – U.S. Federal Regulations
This product is an article as defined by TSCA regulations, and is exempt from TSCA
inventory listing requirements.
National regulations – Great Britain
Hazchem-Code: –
16. Other information
Hazard rating systems:
1
10
NFPA Hazard Rating:
Health: 1 (Slight)
Fire: 1 (Slight)
Reactivity: 0 (Minimal)
HEALTH 1
FLAMMABILITY 1
PHYSICAL HAZARD 0
X
HMIS Version III Rating:
Health: 1 (Slight)
Flammability: 1 (Slight)
Physical Hazard: 0 (Minimal)
Personal Protection: X = Consult your supervisor
Abbreviations and acronyms:
ADN: European Agreement concerning the International Carriage of Dangerous Goods
by Inland Waterways
ADR: European Agreement concerning the International Carriage of Dangerous Goods
by Road
CAS: Chemical Abstracts Service
CFR: Code of Federal Regulations
CLP: Classification, Labelling and Packaging
DMEL: Derived minimal effect level
DNEL: Derived no-effect level
EC: European Community
EN: European Standard
IATA: International Air Transport Association
IBC Code: International Code for the Construction and Equipment of Ships carrying
Dangerous Chemicals in Bulk
IMDG Code: International Maritime Dangerous Goods Code
MARPOL: Maritime Pollution: The International Convention for the Prevention of Pollution
from Ships
OSHA: Occupational Safety and Health Administration
PBT: Persistent, bioaccumulative and toxic
PNEC: Predicted no-effect concentration
RID: Regulations Concerning the International Carriage of Dangerous Goods by Rail
TSCA: Toxic Substance Control Act
vPvB: Very persistent and very bioaccumulative
Reason of change: Changes in section 1: product identifier
Department issuing data sheet
Contact person: see section 1: Department responsible for information
printed by Airtech Advanced Materials Group with Qualisys SUMDAT
Safety information sheet
Voluntary product information following the Safety Data Sheet format
Bagging Films
Material number 1025
Revision date: 5/14/2020
Version: 7
Language: en-US
Date of first version:10/21/2014
Page: 8 of 8
This data sheet cannot cover all possible situations which the user may experience during processing. Each
aspect of your operation should be examined to determine if, and which additional precautions may be
necessary. All health and safety information contained in this data sheet should be provided to your
employees and customers. It is your responsibility to develop appropriate workplace instructions and training
programs for employees.
As the conditions and methods of use are beyond our control, we do not assume any responsibility and
expressly disclaim any liability for any use of this product. The information supplied on this safety data sheet
complies with our current level of knowledge as well as with national and EU regulations. All statements or
suggestions are made without warranty, expressed or implied, regarding accuracy of information, the
hazards connected with the use of the product or the results to be obtained from the use thereof.
printed by Airtech Advanced Materials Group with Qualisys SUMDAT
by | Sep 27, 2025
by | Sep 27, 2025
Safety information sheet
Voluntary product information following the Safety Data Sheet format
Bagging Films
Material number 1025
Revision date: 5/14/2020
Version: 7
Language: en-US
Date of first version:10/21/2014
Page: 1 of 8
1. Product and company identification
Product identifier
Trade name: Bagging Films
NBF125C, Big Blue L-100, Securlon V-45, Securlon L-500Y, Securlon L-1000,
Securlon L-2000, Securlon L2000 Embossed, Stretchlon 200, Stretchlon 700,
Stretchlon 800, Stretchlon 850, Stretchlon HT-350, Ipplon KM1300, Ipplon
DP1000, Ipplon DPT1000, Ipplon WN1500, Wrightlon 600V, Wrightlon 5400,
Wrightlon 6400, Wrightlon 7400, Wrightlon 8400, Dahlar Release Bag 125,
Dahlar Release Bag 375R, Dahlar Release Bag 460, Dahlar Release Bag 500,
Econolon, Airdraw 2, Thermalimide
Relevant identified uses of the substance or mixture and uses advised against
General use: Article: Vacuum bagging film
Details of the supplier of the safety data sheet
Company name:
Airtech International, Inc.
5700 Skylab Road
Huntington Beach, CA 92647
E-mail: airtech@airtechintl.com
Website: www.airtechonline.com
Telephone: +1 714.899.8100
Department responsible for
information:
Telephone: +1 714.899.8100
E-mail: airtech@airtechintl.com
Airtech Europe Sarl
Zone industrielle Haneboesch
L!4562 Differdange
Luxembourg
Website: www.airtech.lu
Telephone: +352 582.282
Department responsible for information:
Telephone: +352 582.282
E-mail: sales@airtech.lu
Tygavac Advanced Materials Ltd.
The Causeway
Broadway Business Park
Chadderton, Oldham
OL9 9XD United Kingdom
Website: www.tygavac.co.uk
Telephone: +44 161.947.1610
Department responsible for
information:
Telephone: +44 161.947.1610
E-mail: sales@tygavac.co.uk
Airtech Asia Ltd.
No. 161 of Anyuan Rd
Chagugang County
Wuqing District
301721, Tianjin, P.R. China
Website: www.airtech.asia
Telephone: +86 22 8862 9800
Telefax:: +86 22 8862 9900
Department responsible for information:
Telephone: +86 22 8862 9800
E-mail: airtech.asia@airtechasia.com.cn
Emergency phone number
CHEMTREC EMERGENCY PHONE:
Within USA/Canada: 1-(800)424-9300
International: +1 703-741-5970
2. Hazards identification
Emergency overview
Appearance: Form: solid
Color: varying
Odor: odorless
Classification: Article not subject to hazard labelling or classification.
printed by Airtech Advanced Materials Group with Qualisys SUMDAT
Safety information sheet
Voluntary product information following the Safety Data Sheet format
Bagging Films
Material number 1025
Revision date: 5/14/2020
Version: 7
Language: en-US
Date of first version:10/21/2014
Page: 2 of 8
Regulatory status
This material is not considered hazardous by the U.S. OSHA Hazard Communication
Standard (29 CFR 1910.1200).
Hazards not otherwise classified
Toxic fumes may be emitted at elevated temperatures. Do not breathe vapor. Processing,
e.g. by cutting, sawing or grinding, can produce particles and dust. Avoid inhalation of
dusts, as even inert dusts may functionally affect respiratory organs.
see section 11: Toxicological information
3. Composition / Information on ingredients
Chemical characterization:
Thermoplastic films
4. First aid measures
In case of inhalation:In case of inhalation of decomposition products, affected person should be moved into
fresh air and kept still. If the casualty has difficulty breathing, call a doctor immediately.
Following skin contact:After contact with molten product, cool skin area rapidly with cold water. Do not peel
solidified product off the skin. Seek medical attention.
After eye contact: In the event of irritation from processing vapors: Immediately flush eyes with plenty of
flowing water for 10 to 15 minutes holding eyelids apart. In case of troubles or persistent
symptoms, consult an opthalmologist.
After swallowing: Not a probable route of exposure.
In the case of the formation of dust: Rinse mouth. Seek medical treatment in case of
troubles.
Most important symptoms/effects, acute and delayed
In case of inhalation:
Inhalation of dust may cause irritation of the respiratory system. Overheating released
mist or vapors can irritate the respiratory tracts.
Other symptoms: Cough, respiratory complaints, dizziness, nausea, vomiting.
After contact with skin: The melted product can cause severe burns.
After eye contact:
Process vapors can irritate the eyes. Dust contact with the eyes can lead to mechanical
irritation.
Information to physician
Treat symptomatically.
5. Fire fighting measures
Flash point/flash point range:
No data available
Auto-ignition temperature:
No data available
Suitable extinguishing media:
Water spray jet, dry chemical powder, foam, carbon dioxide
Extinguishing media which must not be used for safety reasons:
Full water jet.
printed by Airtech Advanced Materials Group with Qualisys SUMDAT
Safety information sheet
Voluntary product information following the Safety Data Sheet format
Bagging Films
Material number 1025
Revision date: 5/14/2020
Version: 7
Language: en-US
Date of first version:10/21/2014
Page: 3 of 8
Specific hazards arising from the chemical
This material is combustible, but will not ignite readily. Toxic fumes may be emitted at
elevated temperatures.
In case of fire may be liberated: Caprolactam, nitrogen oxides (NOx), amines, carbon
monoxide and carbon dioxide, hydrogen cyanide, isocyanates, isocyanic acid.
Protective equipment and precautions for firefighters:
Wear a self-contained breathing apparatus and chemical protective clothing.
Additional information:Seal off endangered area. Cool endangered containers with water spray and, if possible,
remove from danger zone. Use a water fog to control vapors. Do not breathe fumes. Do
not allow fire water to penetrate into surface or ground water.
6. Accidental release measures
Personal precautions:Handle in accordance with good industrial hygiene and safety practice.
At processing: Avoid the formation of aerosol/vapors. Avoid generation of dust. Avoid
inhalation and contact with skin and eyes. Wear appropriate protective equipment. Keep
unprotected people away. Ensure adequate ventilation, especially in confined areas.
Environmental precautions:
Do not allow to penetrate into soil, waterbodies or drains.
Methods for clean-up:Take up mechanically, placing in appropriate containers for disposal. Dispose of waste
according to applicable legislation.
7. Handling and storage
Handling
Advices on safe handling:Handle in accordance with good industrial hygiene and safety practice.
At processing: Provide adequate ventilation, and local exhaust as needed. Avoid the
formation of aerosol/vapors. Avoid generation of dust. Avoid inhalation and contact with
skin and eyes. Wear appropriate protective equipment. Keep unprotected people away.
When using do not eat, drink or smoke.
Precautions against fire and explosion:
Take standard precautions to prevent fire.
Storage
Requirements for storerooms and containers:
Keep in a cool place. Keep container dry. Protect from direct sunlight. Keep away from
incompatible materials. Store at room temperature.
Hints on joint storage:Incompatible materials: Strong bases, strong acids, strong oxidizing agents.
Keep away from food and drinks.
8. Exposure controls / personal protection
Exposure guidelines
Occupational exposure limit values:
Type Limit value
USA: ACGIH: TWA 10 mg/m” (Dust limit value, inhalable fraction)
USA: ACGIH: TWA 3 mg/m” (Dust limit value, respirable fraction)
USA: OSHA: TWA 15 mg/m” (Dust limit value, inhalable fraction)
USA: OSHA: TWA 5 mg/m” (Dust limit value, respirable fraction)
printed by Airtech Advanced Materials Group with Qualisys SUMDAT
Safety information sheet
Voluntary product information following the Safety Data Sheet format
Bagging Films
Material number 1025
Revision date: 5/14/2020
Version: 7
Language: en-US
Date of first version:10/21/2014
Page: 4 of 8
Engineering controls
Provide good ventilation and/or an exhaust system in the work area.
In case of development of vapors or dust (at processing): Use local exhaust.
See also information in chapter 7, section storage.
Personal protection equipment (PPE)
Eye/face protection:At processing (recommended): Safety glasses in accordance with OSHA 29 CFR:
1910.133 or ANSI Z87.1-2010.
Skin protection: At processing (recommended): Wear suitable protective clothing.
Recommendation:
Protective gloves according to OSHA Standard – 29 CFR: 1910.138.
Glove material: nitrile rubber (0.11 mm)
Breakthrough time: 480 min.
Observe glove manufacturer’s instructions concerning penetrability and breakthrough time.
Respiratory protection:Respiratory protection is not necessary if room is well ventilated.
At processing:
When vapors form, use respiratory protection. The filter class must be suitable for the
maximum contaminant concentration (gas/vapor/aerosol/particulates) that may arise
when handling the product. If the concentration is exceeded, self-contained breathing
apparatus must be used.
General hygiene considerations:
Handle in accordance with good industrial hygiene and safety practice. Wash hands
before breaks and after work. When using do not eat, drink or smoke.
At processing:
Avoid contact with skin, eyes, and clothing. Do not breathe vapors. Do not breathe dust.
9. Physical and chemical properties
Information on basic physical and chemical properties
Appearance: Form: solid
Color: varying
Odor: odorless
Odor threshold: No data available
pH value: No data available
Melting point/freezing point: No data available
Initial boiling point and boiling range:No data available
Flash point/flash point range: No data available
Evaporation rate: No data available
Flammability: This material is combustible, but will not ignite readily.
Explosion limits: No data available
Vapor pressure: No data available
Vapor density: No data available
Density: No data available
Water solubility: at 68 #F: insoluble
Partition coefficient: n-octanol/water:No data available
Auto-ignition temperature: No data available
Thermal decomposition: No data available
Additional information: No data available
printed by Airtech Advanced Materials Group with Qualisys SUMDAT
Safety information sheet
Voluntary product information following the Safety Data Sheet format
Bagging Films
Material number 1025
Revision date: 5/14/2020
Version: 7
Language: en-US
Date of first version:10/21/2014
Page: 5 of 8
10. Stability and reactivity
Reactivity: Refer to section: Possibility of hazardous reactions.
Chemical stability:Stable under recommended storage conditions.
Possibility of hazardous reactions:
No dangerous reactions with proper and specified storage and handling
Conditions to avoid:Keep away from heat. Protect from direct sunlight. Avoid generation of dust. Avoid the
formation of aerosol/vapors.
Incompatible materials:Strong bases, strong acids, strong oxidizing agents.
Hazardous decomposition products:
Caprolactam, nitrogen oxides (NOx), amines, carbon monoxide and carbon dioxide,
hydrogen cyanide, isocyanates, isocyanic acid.
Thermal decomposition:No data available
11. Toxicological information
Toxicological tests
Toxicological effects:The statements are derived from the properties of the single components. No toxicological
data is available for the product as such.
Acute toxicity (oral): Lack of data.
Acute toxicity (dermal): Lack of data.
Acute toxicity (inhalative): Lack of data.
Skin corrosion/irritation: Lack of data.
Serious eye damage/irritation: Lack of data.
Sensitisation to the respiratory tract: Lack of data.
Skin sensitisation: Lack of data.
Germ cell mutagenicity/Genotoxicity: Lack of data.
Carcinogenicity: Lack of data.
Reproductive toxicity: Lack of data.
Effects on or via lactation: Lack of data.
Specific target organ toxicity (single exposure): Lack of data.
Specific target organ toxicity (repeated exposure): Lack of data.
Aspiration hazard: Lack of data.
Other information: Toxic fumes may be emitted at elevated temperatures. Processing, e.g. by cutting,
sawing or grinding, can produce particles and dust. Dust may irritate airways and cause
bronchitis symptoms.
Information about Caprolactam: Harmful if swallowed. Harmful if inhaled. Causes skin
irritation. Causes serious eye irritation. May cause respiratory irritation.
printed by Airtech Advanced Materials Group with Qualisys SUMDAT
Safety information sheet
Voluntary product information following the Safety Data Sheet format
Bagging Films
Material number 1025
Revision date: 5/14/2020
Version: 7
Language: en-US
Date of first version:10/21/2014
Page: 6 of 8
Symptoms
In case of inhalation:
Inhalation of dust may cause irritation of the respiratory system. Overheating released
mist or vapors can irritate the respiratory tracts.
Other symptoms: Cough, respiratory complaints, dizziness, nausea, vomiting.
After contact with skin: The melted product can cause severe burns.
After eye contact:
Process vapors can irritate the eyes. Dust contact with the eyes can lead to mechanical
irritation.
12. Ecological information
Ecotoxicity
Effects in sewage plants:The insoluble part can be precipitated mechanically in suitable sewage treatment plants.
Further details: No data available
Mobility in soil
No data available
Persistence and degradability
Further details: Product is not biodegradable.
Additional ecological information
General information:Do not allow to penetrate into soil, waterbodies or drains.
13. Disposal considerations
Product
Recommendation: Dispose of waste according to applicable legislation. Recycling or special waste
incineration.
Contaminated packaging
Recommendation: Dispose of waste according to applicable legislation. Non-contaminated packages may be
recycled.
14. Transport information
USA: Department of Transportation (DOT)
Proper shipping name: Not restricted
Sea transport (IMDG)
Proper shipping name: Not restricted
Marine pollutant: no
Air transport (IATA)
Proper shipping name: Not restricted
Further information
No dangerous good in sense of these transport regulations.
printed by Airtech Advanced Materials Group with Qualisys SUMDAT
Safety information sheet
Voluntary product information following the Safety Data Sheet format
Bagging Films
Material number 1025
Revision date: 5/14/2020
Version: 7
Language: en-US
Date of first version:10/21/2014
Page: 7 of 8
15. Regulatory information
National regulations – U.S. Federal Regulations
This product is an article as defined by TSCA regulations, and is exempt from TSCA
inventory listing requirements.
National regulations – Great Britain
Hazchem-Code: –
16. Other information
Hazard rating systems:
1
10
NFPA Hazard Rating:
Health: 1 (Slight)
Fire: 1 (Slight)
Reactivity: 0 (Minimal)
HEALTH 1
FLAMMABILITY 1
PHYSICAL HAZARD 0
X
HMIS Version III Rating:
Health: 1 (Slight)
Flammability: 1 (Slight)
Physical Hazard: 0 (Minimal)
Personal Protection: X = Consult your supervisor
Abbreviations and acronyms:
ADN: European Agreement concerning the International Carriage of Dangerous Goods
by Inland Waterways
ADR: European Agreement concerning the International Carriage of Dangerous Goods
by Road
CAS: Chemical Abstracts Service
CFR: Code of Federal Regulations
CLP: Classification, Labelling and Packaging
DMEL: Derived minimal effect level
DNEL: Derived no-effect level
EC: European Community
EN: European Standard
IATA: International Air Transport Association
IBC Code: International Code for the Construction and Equipment of Ships carrying
Dangerous Chemicals in Bulk
IMDG Code: International Maritime Dangerous Goods Code
MARPOL: Maritime Pollution: The International Convention for the Prevention of Pollution
from Ships
OSHA: Occupational Safety and Health Administration
PBT: Persistent, bioaccumulative and toxic
PNEC: Predicted no-effect concentration
RID: Regulations Concerning the International Carriage of Dangerous Goods by Rail
TSCA: Toxic Substance Control Act
vPvB: Very persistent and very bioaccumulative
Reason of change: Changes in section 1: product identifier
Department issuing data sheet
Contact person: see section 1: Department responsible for information
printed by Airtech Advanced Materials Group with Qualisys SUMDAT
Safety information sheet
Voluntary product information following the Safety Data Sheet format
Bagging Films
Material number 1025
Revision date: 5/14/2020
Version: 7
Language: en-US
Date of first version:10/21/2014
Page: 8 of 8
This data sheet cannot cover all possible situations which the user may experience during processing. Each
aspect of your operation should be examined to determine if, and which additional precautions may be
necessary. All health and safety information contained in this data sheet should be provided to your
employees and customers. It is your responsibility to develop appropriate workplace instructions and training
programs for employees.
As the conditions and methods of use are beyond our control, we do not assume any responsibility and
expressly disclaim any liability for any use of this product. The information supplied on this safety data sheet
complies with our current level of knowledge as well as with national and EU regulations. All statements or
suggestions are made without warranty, expressed or implied, regarding accuracy of information, the
hazards connected with the use of the product or the results to be obtained from the use thereof.
printed by Airtech Advanced Materials Group with Qualisys SUMDAT
by | Sep 27, 2025
Safety information sheet
Voluntary product information following the Safety Data Sheet format
Bagging Films
Material number 1025
Revision date: 5/14/2020
Version: 7
Language: en-US
Date of first version:10/21/2014
Page: 1 of 8
1. Product and company identification
Product identifier
Trade name: Bagging Films
NBF125C, Big Blue L-100, Securlon V-45, Securlon L-500Y, Securlon L-1000,
Securlon L-2000, Securlon L2000 Embossed, Stretchlon 200, Stretchlon 700,
Stretchlon 800, Stretchlon 850, Stretchlon HT-350, Ipplon KM1300, Ipplon
DP1000, Ipplon DPT1000, Ipplon WN1500, Wrightlon 600V, Wrightlon 5400,
Wrightlon 6400, Wrightlon 7400, Wrightlon 8400, Dahlar Release Bag 125,
Dahlar Release Bag 375R, Dahlar Release Bag 460, Dahlar Release Bag 500,
Econolon, Airdraw 2, Thermalimide
Relevant identified uses of the substance or mixture and uses advised against
General use: Article: Vacuum bagging film
Details of the supplier of the safety data sheet
Company name:
Airtech International, Inc.
5700 Skylab Road
Huntington Beach, CA 92647
E-mail: airtech@airtechintl.com
Website: www.airtechonline.com
Telephone: +1 714.899.8100
Department responsible for
information:
Telephone: +1 714.899.8100
E-mail: airtech@airtechintl.com
Airtech Europe Sarl
Zone industrielle Haneboesch
L!4562 Differdange
Luxembourg
Website: www.airtech.lu
Telephone: +352 582.282
Department responsible for information:
Telephone: +352 582.282
E-mail: sales@airtech.lu
Tygavac Advanced Materials Ltd.
The Causeway
Broadway Business Park
Chadderton, Oldham
OL9 9XD United Kingdom
Website: www.tygavac.co.uk
Telephone: +44 161.947.1610
Department responsible for
information:
Telephone: +44 161.947.1610
E-mail: sales@tygavac.co.uk
Airtech Asia Ltd.
No. 161 of Anyuan Rd
Chagugang County
Wuqing District
301721, Tianjin, P.R. China
Website: www.airtech.asia
Telephone: +86 22 8862 9800
Telefax:: +86 22 8862 9900
Department responsible for information:
Telephone: +86 22 8862 9800
E-mail: airtech.asia@airtechasia.com.cn
Emergency phone number
CHEMTREC EMERGENCY PHONE:
Within USA/Canada: 1-(800)424-9300
International: +1 703-741-5970
2. Hazards identification
Emergency overview
Appearance: Form: solid
Color: varying
Odor: odorless
Classification: Article not subject to hazard labelling or classification.
printed by Airtech Advanced Materials Group with Qualisys SUMDAT
Safety information sheet
Voluntary product information following the Safety Data Sheet format
Bagging Films
Material number 1025
Revision date: 5/14/2020
Version: 7
Language: en-US
Date of first version:10/21/2014
Page: 2 of 8
Regulatory status
This material is not considered hazardous by the U.S. OSHA Hazard Communication
Standard (29 CFR 1910.1200).
Hazards not otherwise classified
Toxic fumes may be emitted at elevated temperatures. Do not breathe vapor. Processing,
e.g. by cutting, sawing or grinding, can produce particles and dust. Avoid inhalation of
dusts, as even inert dusts may functionally affect respiratory organs.
see section 11: Toxicological information
3. Composition / Information on ingredients
Chemical characterization:
Thermoplastic films
4. First aid measures
In case of inhalation:In case of inhalation of decomposition products, affected person should be moved into
fresh air and kept still. If the casualty has difficulty breathing, call a doctor immediately.
Following skin contact:After contact with molten product, cool skin area rapidly with cold water. Do not peel
solidified product off the skin. Seek medical attention.
After eye contact: In the event of irritation from processing vapors: Immediately flush eyes with plenty of
flowing water for 10 to 15 minutes holding eyelids apart. In case of troubles or persistent
symptoms, consult an opthalmologist.
After swallowing: Not a probable route of exposure.
In the case of the formation of dust: Rinse mouth. Seek medical treatment in case of
troubles.
Most important symptoms/effects, acute and delayed
In case of inhalation:
Inhalation of dust may cause irritation of the respiratory system. Overheating released
mist or vapors can irritate the respiratory tracts.
Other symptoms: Cough, respiratory complaints, dizziness, nausea, vomiting.
After contact with skin: The melted product can cause severe burns.
After eye contact:
Process vapors can irritate the eyes. Dust contact with the eyes can lead to mechanical
irritation.
Information to physician
Treat symptomatically.
5. Fire fighting measures
Flash point/flash point range:
No data available
Auto-ignition temperature:
No data available
Suitable extinguishing media:
Water spray jet, dry chemical powder, foam, carbon dioxide
Extinguishing media which must not be used for safety reasons:
Full water jet.
printed by Airtech Advanced Materials Group with Qualisys SUMDAT
Safety information sheet
Voluntary product information following the Safety Data Sheet format
Bagging Films
Material number 1025
Revision date: 5/14/2020
Version: 7
Language: en-US
Date of first version:10/21/2014
Page: 3 of 8
Specific hazards arising from the chemical
This material is combustible, but will not ignite readily. Toxic fumes may be emitted at
elevated temperatures.
In case of fire may be liberated: Caprolactam, nitrogen oxides (NOx), amines, carbon
monoxide and carbon dioxide, hydrogen cyanide, isocyanates, isocyanic acid.
Protective equipment and precautions for firefighters:
Wear a self-contained breathing apparatus and chemical protective clothing.
Additional information:Seal off endangered area. Cool endangered containers with water spray and, if possible,
remove from danger zone. Use a water fog to control vapors. Do not breathe fumes. Do
not allow fire water to penetrate into surface or ground water.
6. Accidental release measures
Personal precautions:Handle in accordance with good industrial hygiene and safety practice.
At processing: Avoid the formation of aerosol/vapors. Avoid generation of dust. Avoid
inhalation and contact with skin and eyes. Wear appropriate protective equipment. Keep
unprotected people away. Ensure adequate ventilation, especially in confined areas.
Environmental precautions:
Do not allow to penetrate into soil, waterbodies or drains.
Methods for clean-up:Take up mechanically, placing in appropriate containers for disposal. Dispose of waste
according to applicable legislation.
7. Handling and storage
Handling
Advices on safe handling:Handle in accordance with good industrial hygiene and safety practice.
At processing: Provide adequate ventilation, and local exhaust as needed. Avoid the
formation of aerosol/vapors. Avoid generation of dust. Avoid inhalation and contact with
skin and eyes. Wear appropriate protective equipment. Keep unprotected people away.
When using do not eat, drink or smoke.
Precautions against fire and explosion:
Take standard precautions to prevent fire.
Storage
Requirements for storerooms and containers:
Keep in a cool place. Keep container dry. Protect from direct sunlight. Keep away from
incompatible materials. Store at room temperature.
Hints on joint storage:Incompatible materials: Strong bases, strong acids, strong oxidizing agents.
Keep away from food and drinks.
8. Exposure controls / personal protection
Exposure guidelines
Occupational exposure limit values:
Type Limit value
USA: ACGIH: TWA 10 mg/m” (Dust limit value, inhalable fraction)
USA: ACGIH: TWA 3 mg/m” (Dust limit value, respirable fraction)
USA: OSHA: TWA 15 mg/m” (Dust limit value, inhalable fraction)
USA: OSHA: TWA 5 mg/m” (Dust limit value, respirable fraction)
printed by Airtech Advanced Materials Group with Qualisys SUMDAT
Safety information sheet
Voluntary product information following the Safety Data Sheet format
Bagging Films
Material number 1025
Revision date: 5/14/2020
Version: 7
Language: en-US
Date of first version:10/21/2014
Page: 4 of 8
Engineering controls
Provide good ventilation and/or an exhaust system in the work area.
In case of development of vapors or dust (at processing): Use local exhaust.
See also information in chapter 7, section storage.
Personal protection equipment (PPE)
Eye/face protection:At processing (recommended): Safety glasses in accordance with OSHA 29 CFR:
1910.133 or ANSI Z87.1-2010.
Skin protection: At processing (recommended): Wear suitable protective clothing.
Recommendation:
Protective gloves according to OSHA Standard – 29 CFR: 1910.138.
Glove material: nitrile rubber (0.11 mm)
Breakthrough time: 480 min.
Observe glove manufacturer’s instructions concerning penetrability and breakthrough time.
Respiratory protection:Respiratory protection is not necessary if room is well ventilated.
At processing:
When vapors form, use respiratory protection. The filter class must be suitable for the
maximum contaminant concentration (gas/vapor/aerosol/particulates) that may arise
when handling the product. If the concentration is exceeded, self-contained breathing
apparatus must be used.
General hygiene considerations:
Handle in accordance with good industrial hygiene and safety practice. Wash hands
before breaks and after work. When using do not eat, drink or smoke.
At processing:
Avoid contact with skin, eyes, and clothing. Do not breathe vapors. Do not breathe dust.
9. Physical and chemical properties
Information on basic physical and chemical properties
Appearance: Form: solid
Color: varying
Odor: odorless
Odor threshold: No data available
pH value: No data available
Melting point/freezing point: No data available
Initial boiling point and boiling range:No data available
Flash point/flash point range: No data available
Evaporation rate: No data available
Flammability: This material is combustible, but will not ignite readily.
Explosion limits: No data available
Vapor pressure: No data available
Vapor density: No data available
Density: No data available
Water solubility: at 68 #F: insoluble
Partition coefficient: n-octanol/water:No data available
Auto-ignition temperature: No data available
Thermal decomposition: No data available
Additional information: No data available
printed by Airtech Advanced Materials Group with Qualisys SUMDAT
Safety information sheet
Voluntary product information following the Safety Data Sheet format
Bagging Films
Material number 1025
Revision date: 5/14/2020
Version: 7
Language: en-US
Date of first version:10/21/2014
Page: 5 of 8
10. Stability and reactivity
Reactivity: Refer to section: Possibility of hazardous reactions.
Chemical stability:Stable under recommended storage conditions.
Possibility of hazardous reactions:
No dangerous reactions with proper and specified storage and handling
Conditions to avoid:Keep away from heat. Protect from direct sunlight. Avoid generation of dust. Avoid the
formation of aerosol/vapors.
Incompatible materials:Strong bases, strong acids, strong oxidizing agents.
Hazardous decomposition products:
Caprolactam, nitrogen oxides (NOx), amines, carbon monoxide and carbon dioxide,
hydrogen cyanide, isocyanates, isocyanic acid.
Thermal decomposition:No data available
11. Toxicological information
Toxicological tests
Toxicological effects:The statements are derived from the properties of the single components. No toxicological
data is available for the product as such.
Acute toxicity (oral): Lack of data.
Acute toxicity (dermal): Lack of data.
Acute toxicity (inhalative): Lack of data.
Skin corrosion/irritation: Lack of data.
Serious eye damage/irritation: Lack of data.
Sensitisation to the respiratory tract: Lack of data.
Skin sensitisation: Lack of data.
Germ cell mutagenicity/Genotoxicity: Lack of data.
Carcinogenicity: Lack of data.
Reproductive toxicity: Lack of data.
Effects on or via lactation: Lack of data.
Specific target organ toxicity (single exposure): Lack of data.
Specific target organ toxicity (repeated exposure): Lack of data.
Aspiration hazard: Lack of data.
Other information: Toxic fumes may be emitted at elevated temperatures. Processing, e.g. by cutting,
sawing or grinding, can produce particles and dust. Dust may irritate airways and cause
bronchitis symptoms.
Information about Caprolactam: Harmful if swallowed. Harmful if inhaled. Causes skin
irritation. Causes serious eye irritation. May cause respiratory irritation.
printed by Airtech Advanced Materials Group with Qualisys SUMDAT
Safety information sheet
Voluntary product information following the Safety Data Sheet format
Bagging Films
Material number 1025
Revision date: 5/14/2020
Version: 7
Language: en-US
Date of first version:10/21/2014
Page: 6 of 8
Symptoms
In case of inhalation:
Inhalation of dust may cause irritation of the respiratory system. Overheating released
mist or vapors can irritate the respiratory tracts.
Other symptoms: Cough, respiratory complaints, dizziness, nausea, vomiting.
After contact with skin: The melted product can cause severe burns.
After eye contact:
Process vapors can irritate the eyes. Dust contact with the eyes can lead to mechanical
irritation.
12. Ecological information
Ecotoxicity
Effects in sewage plants:The insoluble part can be precipitated mechanically in suitable sewage treatment plants.
Further details: No data available
Mobility in soil
No data available
Persistence and degradability
Further details: Product is not biodegradable.
Additional ecological information
General information:Do not allow to penetrate into soil, waterbodies or drains.
13. Disposal considerations
Product
Recommendation: Dispose of waste according to applicable legislation. Recycling or special waste
incineration.
Contaminated packaging
Recommendation: Dispose of waste according to applicable legislation. Non-contaminated packages may be
recycled.
14. Transport information
USA: Department of Transportation (DOT)
Proper shipping name: Not restricted
Sea transport (IMDG)
Proper shipping name: Not restricted
Marine pollutant: no
Air transport (IATA)
Proper shipping name: Not restricted
Further information
No dangerous good in sense of these transport regulations.
printed by Airtech Advanced Materials Group with Qualisys SUMDAT
Safety information sheet
Voluntary product information following the Safety Data Sheet format
Bagging Films
Material number 1025
Revision date: 5/14/2020
Version: 7
Language: en-US
Date of first version:10/21/2014
Page: 7 of 8
15. Regulatory information
National regulations – U.S. Federal Regulations
This product is an article as defined by TSCA regulations, and is exempt from TSCA
inventory listing requirements.
National regulations – Great Britain
Hazchem-Code: –
16. Other information
Hazard rating systems:
1
10
NFPA Hazard Rating:
Health: 1 (Slight)
Fire: 1 (Slight)
Reactivity: 0 (Minimal)
HEALTH 1
FLAMMABILITY 1
PHYSICAL HAZARD 0
X
HMIS Version III Rating:
Health: 1 (Slight)
Flammability: 1 (Slight)
Physical Hazard: 0 (Minimal)
Personal Protection: X = Consult your supervisor
Abbreviations and acronyms:
ADN: European Agreement concerning the International Carriage of Dangerous Goods
by Inland Waterways
ADR: European Agreement concerning the International Carriage of Dangerous Goods
by Road
CAS: Chemical Abstracts Service
CFR: Code of Federal Regulations
CLP: Classification, Labelling and Packaging
DMEL: Derived minimal effect level
DNEL: Derived no-effect level
EC: European Community
EN: European Standard
IATA: International Air Transport Association
IBC Code: International Code for the Construction and Equipment of Ships carrying
Dangerous Chemicals in Bulk
IMDG Code: International Maritime Dangerous Goods Code
MARPOL: Maritime Pollution: The International Convention for the Prevention of Pollution
from Ships
OSHA: Occupational Safety and Health Administration
PBT: Persistent, bioaccumulative and toxic
PNEC: Predicted no-effect concentration
RID: Regulations Concerning the International Carriage of Dangerous Goods by Rail
TSCA: Toxic Substance Control Act
vPvB: Very persistent and very bioaccumulative
Reason of change: Changes in section 1: product identifier
Department issuing data sheet
Contact person: see section 1: Department responsible for information
printed by Airtech Advanced Materials Group with Qualisys SUMDAT
Safety information sheet
Voluntary product information following the Safety Data Sheet format
Bagging Films
Material number 1025
Revision date: 5/14/2020
Version: 7
Language: en-US
Date of first version:10/21/2014
Page: 8 of 8
This data sheet cannot cover all possible situations which the user may experience during processing. Each
aspect of your operation should be examined to determine if, and which additional precautions may be
necessary. All health and safety information contained in this data sheet should be provided to your
employees and customers. It is your responsibility to develop appropriate workplace instructions and training
programs for employees.
As the conditions and methods of use are beyond our control, we do not assume any responsibility and
expressly disclaim any liability for any use of this product. The information supplied on this safety data sheet
complies with our current level of knowledge as well as with national and EU regulations. All statements or
suggestions are made without warranty, expressed or implied, regarding accuracy of information, the
hazards connected with the use of the product or the results to be obtained from the use thereof.
printed by Airtech Advanced Materials Group with Qualisys SUMDAT
by | Sep 27, 2025
MATERIAL SAFETY DATA SHEET
ACCORDANCE TO REGULATION (EC) 1907/2006
ACCORDANCE TO REGULATION (EC) 1907/2006 Page 1 of 8
VIP Infusion Flow Green 75
1. IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND OF THE COMPANY /
UNDERTAKING
PRODUCT NAME: VIP Infusion Flow Green 75
USE OF SUBSTANCE/PREPARATION: High density polyethylene
RECOMMENDED USE:
MANUFACTURER: Umeco Process Materials
12801 Ann Street
Santa Fe Springs, CA 90670
FOR MORE INFORMATION CALL: 562-906-3300
IN CASE OF EMERGENCY CALL: 562-906-3300
2. HAZARDS IDENTIFICATION
INDICATION OF DANGER: This product an inert polyethylene. According to Directives
67/548/EEC and 1999/45/EC, it is not classified as hazardous to humans and the environment.
This product is not considered hazardous by the criteria described in the OSHA Hazard
Communication Standard (29 CFR 1910.1200).
Route of Entry: Skin and eye contact
Target Organs: None
Inhalation: Not a route of exposure under normal handling and usage. Vapors may
cause irritation at molten temperatures.
Skin Contact: Not considered hazardous under normal handling and usage.
Eye Contact: Not considered hazardous. May cause mechanical irritation if film
comes into contact with the eye.
Ingestion: Not a route of exposure. Not considered hazardous.
Carcinogenic Status: Not considered carcinogenic by NTP, IARC, and OSHA
MATERIAL SAFETY DATA SHEET
ACCORDANCE TO REGULATION (EC) 1907/2006
ACCORDANCE TO REGULATION (EC) 1907/2006 Page 2 of 8
3. HAZARD IDENTIFICATIONCOMPOSITION / INFORMATION ON INGREDIENTS
HAZARDOUS COMPONENTS: None – Product is an inert polyethylene and poses no danger in its
current form.
Ingredient Name
CAS # % of Ingredient
Polyethylene 9002-88-4 >95%
Modifiers/Additives N/A <5%
The above product(s) are considered articles according to OSHA Hazard Communication
Standard 29 CFR 1910.1200 and, as such, are exempt from the material safety data sheet
provisions of 29 CFR 1910.1200 (G) (6). These products are considered non-hazardous when used
according to accepted practices for the intended use.
Components are not classified as dangerous according to Directive 1999/45/EC. Quantities of listed
compounds contained in this product are not reportable under the article exemption since they do
not release or otherwise result in exposure of a hazardous chemical under normal conditions of
use. Product is a solid film that requires no preparation and causes no health or environmental
hazards within the meaning of Directive 67/548/EEC.
4. FIRST AID MEASURES
Inhalation: Not an expected route of entry during normal handling and use.
Remove person to fresh air and seek medical attention if adverse
symptoms appear.
Skin Contact: Not an expected route of entry during normal handling and use.
Eye Contact: Not an expected route of entry during normal handling and use.
Ingestion: Obtain immediate medical attention.
Advice to Physicians: Treat symptomatically.
MATERIAL SAFETY DATA SHEET
ACCORDANCE TO REGULATION (EC) 1907/2006
ACCORDANCE TO REGULATION (EC) 1907/2006 Page 3 of 8
5. FIRE FIGHTING MEASURES
FLAMMABLE PROPERTIES
Flash Point (Method Used): >640 F (340 C)
Ignition Temperature: >680 F (360 C)
LEL: N/A
UEL: N/A
Extinguishing Method: Carbon dioxide, dry chemical, foam, water or other agents
as appropriate for materials in surrounding fire.
Special Fire Fighting Procedures: Wear NIOSH/MSHA approved positive pressure self-
contained breathing apparatus and full protective clothing.
Unusual Fire and Explosion Hazards: Products of combustion may include oxides of carbon and
nitrogen.
6. ACCIDENTAL RELEASE MEASURES
No specific measure necessary. Prevent material from entering drains or water courses.
7. HANDLING AND STORAGE
Handling Precautions: Use normal personal hygiene and good housekeeping.
Storage Requirements: Store in a cool (<140 F), dry area, away from sources of ignition.
MATERIAL SAFETY DATA SHEET
ACCORDANCE TO REGULATION (EC) 1907/2006
ACCORDANCE TO REGULATION (EC) 1907/2006 Page 4 of 8
8. EXPOSURE CONTROL / PERSONAL PROTECTION
Engineering Controls: No specific measures necessary.
Environmental Exposure Control: No specific measures necessary.
Respiratory Protection: No specific measures necessary.
Hand Protection: No specific measures necessary.
Eye Protection: No specific measures necessary.
Use safety glasses if necessary.
Skin Protection:
No specific measures necessary.
OCCUPATIONAL EXPOSURE STANDARDS:
INGREDIENT
NAME
Guideline Form of Exposure Concentration
N/A
MATERIAL SAFETY DATA SHEET
ACCORDANCE TO REGULATION (EC) 1907/2006
ACCORDANCE TO REGULATION (EC) 1907/2006 Page 5 of 8
9. PHYSICAL AND CHEMICAL PROPERTIES
Appearance: Solid clear plastic net
Physical Status: Solid
Odor: Slight waxy odor
pH: N/A
Vapor Pressure: N/A
Vapor Density: N/A
Boiling Point: N/A
Freezing/Melting Point: 212-275 F (100-135 C)
Solubility: N/A
Spec. Grav./Density: 0.88-0.96 g/cm
3
10. STABILITY AND REACTIVITY
Stability: Normally Stable
Conditions to avoid: Avoid exposure to open flame or temperatures
exceeding recommended processing temperatures.
The maximum temperature to which the film can be
exposed will vary with exposure (dwell) time. Umeco
should be contacted if questions arise concerning
specific processing conditions.
Materials to avoid (Incompatibility): Strong oxidizers, acids, alkalis, halogens, halogenated
hydrocarbons
Hazardous Decomposition Products: Thermal decomposition products may include
acetaldehyde, ketones, acrolein, acetone, acetic acid,
formic acid, formaldehyde.
Hazardous Polymerization: Will not occur
11. TOXICOLOGICAL INFORMATION
Acute Toxicity: Not determined
Chronic Toxicity / Carcinogenicity Effects: Not expected to cause adverse health effects.
Genotoxicity: Not expected to cause mutagenic effects.
Reproductive / Developmental Toxicity: Not expected to cause adverse reproductive effects.
Other Data: N/A
MATERIAL SAFETY DATA SHEET
ACCORDANCE TO REGULATION (EC) 1907/2006
12. ECOLOGICAL INFORMATION
Product is not classified as hazardous according to Directive 1999/45/EC. No relevant studies
identified.
Exotoxicity: No relevant studies identified.
Mobility: No relevant studies identified.
Persistance and degradability: No relevant studies identified
Bioaccumulative Potential: No relevant studies identified.
Other Adverse Effects: N/A
13. DISPOSAL CONSIDERATIONS
Dispose of in compliance with Federal, state and local government regulations. Usually is
considered an inert packaging material that can be recycled, incinerated, or landfilled.
14. TRANSPORT INFORMATION
No special precautions to be aware of under 1907/2006/EC.
US DOT Hazard Class: Not regulated
US DOT ID Number: Not applicable
UN Proper Shipping Name: None
UN Class: None
UN Packaging Group: None
Marine Pollutant: Not applicable
Classification for AIR Transportation (IATA): Consult current IATA regulations prior to
shipping by air.
ACCORDANCE TO REGULATION (EC) 1907/2006 Page 6 of 8
MATERIAL SAFETY DATA SHEET
ACCORDANCE TO REGULATION (EC) 1907/2006
ACCORDANCE TO REGULATION (EC) 1907/2006 Page 7 of 8
15. REGULATORY INFORMATION
Quantities of listed components contained in this product are not reportable under article exemption
according to Directives 67/548/EEC and 1999/45/EC.
Toxic Substance Control Act (TSCA)
TSCA Inventory Status: N/A
Other TSCA Issues: None
SARA Title III/CERCLA
"Reportable Quantities" (RQs) and/or "Threshold Planning Quantities" (TPQs) exist for the
following ingredients.
Ingredient Name
SARA/CERCLA RO (lb) SARA EHS TPO (lb)
No ingredients listed in this section. Section 311 Hazard Class: None. The following ingredients are SARA 313 "Toxic Chemicals". CAS numbers and weight percents
are found in Section 2.
Ingredient Name
Comment
No ingredients listed in this section.
MATERIAL SAFETY DATA SHEET
ACCORDANCE TO REGULATION (EC) 1907/2006
ACCORDANCE TO REGULATION (EC) 1907/2006 Page 8 of 8
State Right-To-Know
In addition to the ingredients found in Section 2, the following are listed for state right-to-know
purposes.
Ingredient Name Weight % Comment
N/A
California Prop. 65 : On This product does not contain any chemicals known to State of California
to cause cancer, birth, or any other reproductive defects.
Additional Regulatory Information:
This product is not intended to be used in any application which places the product in direct
contact with the human body, or in other FDA governed applications, unless specifically
designated otherwise in written material supplied by Umeco to the purchaser.
WHMIS Classification (Canada):
Not a controlled substance. (Considered to be a manufactured article.)
Foreign Inventory Status:
All base monomers and other components are listed on the EINECS Inventory.
16. OTHER INFORMATION
Prepared By:
Engineering and Quality Assurance
Bibliography:
- Directive EEC 67/548 and following adaptations
- Directive 1999/45/EC, as amended
- Directive 76/769/EEC and following amendments
- Directive 2001/58/EC
- EINECS/ELINCS
- 1907/2006/EC
Current Issue Date: 11/30/2012
Previous Issue Date: N/A
by | Sep 27, 2025
by | Sep 27, 2025
TECHNICAL DATA SHEE T
VAC-PAK
HS 8171 6/66
PREPREG
Aerovac
955-10 National Parkway
Schaumburg, IL 60 173
USA
TDS VBHS81716/66_02.21_Issue1
VAC-PAK
HS 8171 6/66
Vacuum bagging film
Ideally suited to high temperature and pressure applications
Features and Benefits
Heat stabilised, co- extruded co-polymer film
produced from modified nylon resin.
High temperature film which can be used for cures
up to 204 C (400 F) and remains pliable after
extended cure cycles.
The co-extrusion process combines multiple layers of
resin flow into film prior to exiting the extrusion die.
This process represents the most advanced state of
the art technology in blown film production.
Ideal for advanced composite fabrication and other
high temperature/pressure applications when softness
and workability are essential.
Can be heat seamed to meet any customer shape
requirements.
PROPERTIES
Maximum use temperature 204 C 400 F
Color Clear, blue and green
Tensile strength at break (ASTM D882) 103MPa 15000PSI
Elongation at break (ASTM D882) 400%
Yield
50 m: 17.30m /kg
75 m: 11.60m /kg
9.39yd /lb
6.3yd /lb
AVAILABILITY
Thickness 50 and 75 m 0.002 and 0.003in
Roll weight Up to 45kg Up to 100lbs
Widths Up to 4m (open) Up to 160in (open)
Formats available V sheet, sheet, lay flat tube
STORAGE
Do not store rolls vertically on their ends.
HEALTH & SAFETY
Please refer to the product MSDS for safe handling, personal protective equipment recommendations and disposal
considerations.
DISCLAIMER: The data and information provided in this document have been obtained from carefully controlled samples and are considered to be
representative of the product described. Aerovac does not express or imply any guarantee or warranty of any kind including, but not limited to, the accuracy, the
completeness or the relevance of the data and information set out herein. Because the properties of this product can be significantly affected by the fabrication
and testing techniques employed, and since Aerovac does not control the conditions under which its products are tested and used, Aerovac cannot guarantee
the properties provided will be obtained with other processes and equipment. No guarantee or warranty is provided if the product is adapted for a s pecific use or
purpose. Aerovac declines any liability with respect to the use made by any third party of the data and information contained herein. Aerovac has the right to
change any data or information when deemed appropriate. All trademarks are the property of their respective owners. 2021 , Aerovac. All rights reserved.
