08RS200_TDS.pdf

by | Sep 27, 2025

TECHNICAL DATA SHEE T
RS 200
SEALANT TAPE

Aerovac
955-10 National Parkway
Schaumburg, IL 60 173
USA

TDS RS200_02.21_Issue1

RS 200
Sealant tape
Ideally suited to aerospace applications

Features and Benefits
Developed for use in composite and metal bond
fabrication.
Provides maximum bag sealing security on
aluminium, steel, fibreglass, nickel and graphite tool
surfaces.
Excellent for bag sealing epoxies, polyesters,
phenolics and other adhesives and prepregs at
temperatures ranging from 82 to 204 C (180 F to
400 F).
Strips easily and cleanly from the tool surfaces after
cure.
PRODUCT VARIANTS
Also available RS220, which works in extended cures
PROPERTIES

Maximum cure temperature 204 C 400 F
Color Grey
AVAILABILITY

Roll size 7.6m x 12.7mm x 3.2mm 25ft x 0.5in x 0.125in
Standard box contents 40 rolls per box
STORAGE
Must be stored in its original containers, below 27 C (81 F) and allowed to return to room temperature before use.
Material has a 12 month shelf life from date of manufacture.
Must be stored flat.
Boxes should be stacked no more than 5 high.
HEALTH & SAFETY
Please refer to the product MSDS for safe handling, personal protective equipment recommendations and disposal
considerations.

DISCLAIMER: The data and information provided in this document have been obtained from carefully controlled samples and are considered to be
representative of the product described. Aerovac does not express or imply any guarantee or warranty of any kind including, but not limited to, the accuracy, the
completeness or the relevance of the data and information set out herein. Because the properties of this product can be significantly affected by the fabrication
and testing techniques employed, and since Aerovac does not control the conditions under which its products are tested and used, Aerovac cannot guarantee
the properties provided will be obtained with other processes and equipment. No guarantee or warranty is provided if the product is adapted for a s pecific use or
purpose. Aerovac declines any liability with respect to the use made by any third party of the data and information contained herein. Aerovac has the right to
change any data or information when deemed appropriate. All trademarks are the property of their respective owners. 2021 , Aerovac. All rights reserved.

08RIV58_TDS.pdf

by | Sep 27, 2025

DESCRIPTION
Various infusion tube fittings are available to connect tubes and valves to control resin flow.
TECHNICAL DATA
Nylon fittings
Material type Nylon
Maximum use temperature 356 F (180 C)
Color Translucent
Infusion valve
Material type Polypropylene
Maximum use temperature 248 F (120 C)
Color Black
SIZES
Connector Type Part Name Works with:
Nylon barb “T” fitting NTF3/8 3/8″ I.D. tubing
NTF1/2 1/2″ I.D. tubing
NTF5/8 5/8″ I.D. tubing
Nylon barb “Elbow” fittings NEF3/8 3/8″ I.D. tubing
NEF1/2 1/2″ I.D. tubing
NEF5/8 5/8″ I.D. tubing
Nylon barb “Coupling” fittings NCF3/8 3/8″ I.D. tubing
NCF1/2 1/2″ I.D. tubing
NCF5/8 5/8″ I.D. tubing
Infusion Valve Infusion Valve 1/2 3/8″ I.D. tubing
Infusion Valve 5/8 1/2″ I.D. tubing
NOTES
The maximum use temperature is dependent upon the duration at maximum temperature and is process
specific, Airtech recommends testing prior to use.
Infusion tube fittings
5700 Skylab Road
Huntington Beach
CA 92647 USA
Phone: +1 714-899-8100
Fax: + 1 714-899-8179
E-mail: airtech@airtech.com
Website: www.airtech.com
Data Sheet
INFUSION TUBING CONNECTORS & VALVES
Last updated : 2023-10-17
Catalog position : Resin infusion products
As the conditions or methods of use, including storage, are beyond our control, Airtech International, Inc. does not assume responsibility for the performance of this material for any particular use. The material is sold “as is”. Airtech International, Inc.
disclaims, and buyer waives, any and all implied warranties, including without limitation the implied warranties of merchantability and of fitness for particular use. The information contained herein represents typical properties and should not be used for
specification purposes. Any translation is provided for your convenience only. The official language is English and the official law is California, USA.

08RC3000NB_TDS.pdf

by | Sep 27, 2025

TECHNICAL DATA SHEE T
RC-3000- NB
BREATHER FABRIC

Aerovac
955-10 National Parkway
Schaumburg, IL 60 173
USA

TDS RC-3000- NB_02.21_Issue1

RC-3000-NB
Breather fabric
Ideally suited to high temperature applications

Features and Benefits
Nylon 66, non- woven felt which operates at
temperatures up to 232 C (450 F) without trapping
off air flow.
Available in 225, 339 and 369g/m (6, 10 and
13oz/yd ) for withstanding pressure to over 200psi
(13.8bar).
Non-toxic, non-corrosive, non-dusting and non-
allergenic.
Resists compression and heat set as experienced by
other lower temperature resistant fibers.
PROPERTIES

Maximum use temperature 232 C 450 F
Color White
Fiber Nylon
Weight
RC-3000-6NB 225g/m 6oz/yd
RC-3000-10NB 339g/m 10oz/yd
RC-3000-13NB 369g/m 13oz/yd
NB: RC- 3000-NB has no release characteristics and should be separated from the laminate by a suitable porous release
fabric or film when used in conjunction with uncured materials.
AVAILABILITY
Standard width Up to 1.52m Up to 60in
Standard length
RC-3000-6NB 45.7m 50yd
RC-3000-10NB/13NB 91.4m 100yd
Cut shapes/slit widths Available up to 120in wide to order
STORAGE
No special storage conditions required.
HEALTH & SAFETY
Please refer to the product MSDS for safe handling, personal protective equipment recommendations and disposal
considerations.

DISCLAIMER: The data and information provided in this document have been obtained from carefully controlled samples and are considered to be
representative of the product described. Aerovac does not express or imply any guarantee or warranty of any kind including, but not limited to, the accuracy, the
completeness or the relevance of the data and information set out herein. Because the properties of this product can be significantly affected by the fabrication
and testing techniques employed, and since Aerovac does not control the conditions under which its products are tested and used, Aerovac cannot guarantee
the properties provided will be obtained with other processes and equipment. No guarantee or warranty is provided if the product is adapted for a s pecific use or
purpose. Aerovac declines any liability with respect to the use made by any third party of the data and information contained herein. Aerovac has the right to
change any data or information when deemed appropriate. All trademarks are the property of their respective owners. 2021 , Aerovac. All rights reserved.