by | Sep 27, 2025
8/31/2022
Inspired by Innovation :: Driven by Excellence
BGF INDUSTRIES, INC. 230 Slayton Ave Suite A-1 Danville, Virginia 24540 USA
434-857-4400 toll free: 800-476-4845
www. bgf.com info@bgf.com
Data Sheet Product Information
Style 7533
Finish 504
Weave Pattern Plain
Fiber Type Glass
Yarn Description
Warp ECG 75 1/2
Fill ECG 75 1/2
Count: (Ends x Picks)/inch 18.0 x 18.0
Weight 5.8 oz/yd
2
(Nominal)
Breaking Strength
Warp 80 lb/inch
Fill 80 lb/inch
Thickness 0.0093 inch (Nominal)
Values shown are based on typical finished fabric data and
should be only used as a guide, not a specification.
by | Sep 27, 2025
HexForce
7533
Fiber Glass Fabric
Product Data
STYLE 7533 US System SI Units
Type of Yarns Warp Yarn: ECG 75 1/2 EC9 68×2
Fill Yarn: ECG 75 1/2 EC9 68×2
Fabric Weight, Dry 5.63 oz/yd
2
191 g/m
2
Weave Style Plain
CONSTRUCTION
Nominal Construction Warp Count: 18/in 7.10/cm
Fill Count: 18/in 7.10/cm
Fabric Thickness 7.30 mil 0.20 mm
Breaking Strength Warp 250 lbf/in
Filling 250 lbf/in
IMPORTANT
All information is believed to be accurate but is given without acceptance of liability. All values have been
generated from limited data. The values listed for weight, thickness and breaking strengths are typical greige
values, unless otherwise noted. Users should make their own assessment of the suitability of any product for
the purpose required. All sales are made subject to our standard terms of sales which include limitations on
liability and other important terms. The fabric style listed may not be available from inventory and minimum
order quantities may apply.
FOR FURTHER INFORMATION, PLEASE CONTACT US
1913 North King Street
Seguin, Texas 78155
Phone: 830-379-1580
Fax: 830-379-9544
Customer Service Toll Free: 1-866-601-5430
For European sales office numbers and a full address list, please go to:
http://www.hexcel.com/contact/salesoffices
Hexcel and Hexcel logo are registered trademarks of Hexcel Corporation, Stamford, Connecticut.
HexForce is a trademark of Hexcel Corporation, Stamford, Connecticut.
by | Sep 27, 2025
HexForce
7533
Fiber Glass Fabric
Product Data
STYLE 7533 US System SI Units
Type of Yarns Warp Yarn: ECG 75 1/2 EC9 68×2
Fill Yarn: ECG 75 1/2 EC9 68×2
Fabric Weight, Dry 5.63 oz/yd
2
191 g/m
2
Weave Style Plain
CONSTRUCTION
Nominal Construction Warp Count: 18/in 7.10/cm
Fill Count: 18/in 7.10/cm
Fabric Thickness 7.30 mil 0.20 mm
Breaking Strength Warp 250 lbf/in
Filling 250 lbf/in
IMPORTANT
All information is believed to be accurate but is given without acceptance of liability. All values have been
generated from limited data. The values listed for weight, thickness and breaking strengths are typical greige
values, unless otherwise noted. Users should make their own assessment of the suitability of any product for
the purpose required. All sales are made subject to our standard terms of sales which include limitations on
liability and other important terms. The fabric style listed may not be available from inventory and minimum
order quantities may apply.
FOR FURTHER INFORMATION, PLEASE CONTACT US
1913 North King Street
Seguin, Texas 78155
Phone: 830-379-1580
Fax: 830-379-9544
Customer Service Toll Free: 1-866-601-5430
For European sales office numbers and a full address list, please go to:
http://www.hexcel.com/contact/salesoffices
Hexcel and Hexcel logo are registered trademarks of Hexcel Corporation, Stamford, Connecticut.
HexForce is a trademark of Hexcel Corporation, Stamford, Connecticut.
by | Sep 27, 2025
HexForce
7533
Fiber Glass Fabric
Product Data
STYLE 7533 US System SI Units
Type of Yarns Warp Yarn: ECG 75 1/2 EC9 68×2
Fill Yarn: ECG 75 1/2 EC9 68×2
Fabric Weight, Dry 5.63 oz/yd
2
191 g/m
2
Weave Style Plain
CONSTRUCTION
Nominal Construction Warp Count: 18/in 7.10/cm
Fill Count: 18/in 7.10/cm
Fabric Thickness 7.30 mil 0.20 mm
Breaking Strength Warp 250 lbf/in
Filling 250 lbf/in
IMPORTANT
All information is believed to be accurate but is given without acceptance of liability. All values have been
generated from limited data. The values listed for weight, thickness and breaking strengths are typical greige
values, unless otherwise noted. Users should make their own assessment of the suitability of any product for
the purpose required. All sales are made subject to our standard terms of sales which include limitations on
liability and other important terms. The fabric style listed may not be available from inventory and minimum
order quantities may apply.
FOR FURTHER INFORMATION, PLEASE CONTACT US
1913 North King Street
Seguin, Texas 78155
Phone: 830-379-1580
Fax: 830-379-9544
Customer Service Toll Free: 1-866-601-5430
For European sales office numbers and a full address list, please go to:
http://www.hexcel.com/contact/salesoffices
Hexcel and Hexcel logo are registered trademarks of Hexcel Corporation, Stamford, Connecticut.
HexForce is a trademark of Hexcel Corporation, Stamford, Connecticut.
by | Sep 27, 2025
8/31/2022
Inspired by Innovation :: Driven by Excellence
BGF INDUSTRIES, INC. 230 Slayton Ave Suite A-1 Danville, Virginia 24540 USA
434-857-4400 toll free: 800-476-4845
www. bgf.com info@bgf.com
Data Sheet Product Information
Style 7533
Finish 504
Weave Pattern Plain
Fiber Type Glass
Yarn Description
Warp ECG 75 1/2
Fill ECG 75 1/2
Count: (Ends x Picks)/inch 18.0 x 18.0
Weight 5.8 oz/yd
2
(Nominal)
Breaking Strength
Warp 80 lb/inch
Fill 80 lb/inch
Thickness 0.0093 inch (Nominal)
Values shown are based on typical finished fabric data and
should be only used as a guide, not a specification.
by | Sep 27, 2025
8/31/2022
Inspired by Innovation :: Driven by Excellence
BGF INDUSTRIES, INC. 230 Slayton Ave Suite A-1 Danville, Virginia 24540 USA
434-857-4400 toll free: 800-476-4845
www. bgf.com info@bgf.com
Data Sheet Product Information
Style 7533
Finish 504
Weave Pattern Plain
Fiber Type Glass
Yarn Description
Warp ECG 75 1/2
Fill ECG 75 1/2
Count: (Ends x Picks)/inch 18.0 x 18.0
Weight 5.8 oz/yd
2
(Nominal)
Breaking Strength
Warp 80 lb/inch
Fill 80 lb/inch
Thickness 0.0093 inch (Nominal)
Values shown are based on typical finished fabric data and
should be only used as a guide, not a specification.
by | Sep 27, 2025
6/23/2023
Inspired by Innovation :: Driven by Excellence
BGF INDUSTRIES, INC. 230 Slayton Ave Suite A-1 Danville, Virginia 24540 USA
434-857-4400 toll free: 800-476-4845
www. bgf.com info@bgf.com
Data Sheet Product Information
Style 7533
Finish A940
Weave Pattern Plain
Fiber Type Glass
Yarn Description
Warp ECG 75 1/2
Fill ECG 75 1/2
Count: (Ends x Picks)/inch 18.0 x 18.0
Weight 5.8 oz/yd
2
(Nominal)
Breaking Strength
Warp 70 lb/inch
Fill 50 lb/inch
Thickness 0.0090 inches (Nominal)
Values shown are based on typical Finished fabric data and
should be only used as a guide, not a specification.
by | Sep 27, 2025
STYLE 7533 Material: E-Glass US System SI Units
Type of Yarns Warp Yarn: ECG 75 1/2 EC9 68 x2
Fill Yarn: ECG 75 1/2 EC9 68 x2
Fabric Weight, Dry 5.85 oz/yd
2
198 g/m
2
Weave Style Plain
CONSTRUCTION
Nominal Construction Warp Count: 18/in 7.1/cm
Fill Count: 18/in 7.1/cm
Fabric Thickness 8.0 mils 0.20 mm
Yarn Breaking Strength Warp 250 lbf/in 219 daN/5cm
Filling 230lbf/in 201 daN/5cm
Specifications AMS 3824C MIL-Y-1140
Availability Common
IMPORTANT
All information is believed to be accurate but is given without acceptance of liability. All values have been
generated from limited data. The values listed for weight, thickness, and breaking strengths are typical greige
values, unless otherwise noted. Users should make their own assessment of the suitability of any product for the
purpose required. All sales are made subject to our standard terms of sales which include limitations on liability
and other important terms. The fabric style listed may not be available from inventory, and minimum order
quantities may apply.
FOR FURTHER INFORMATION, PLEASE CONTACT US
JPS Composite Materials
PO Box 2627
Anderson, SC 29622
USA
Phone: 800-431-1110
Fax: 864-260-6581
ISO 9001 Registered
7533
E-glass Fabric
Product Data
by | Sep 27, 2025
HexForce
7533
Fiber Glass Fabric
Product Data
STYLE 7533 US System SI Units
Type of Yarns Warp Yarn: ECG 75 1/2 EC9 68×2
Fill Yarn: ECG 75 1/2 EC9 68×2
Fabric Weight, Dry 5.63 oz/yd
2
191 g/m
2
Weave Style Plain
CONSTRUCTION
Nominal Construction Warp Count: 18/in 7.10/cm
Fill Count: 18/in 7.10/cm
Fabric Thickness 7.30 mil 0.20 mm
Breaking Strength Warp 250 lbf/in
Filling 250 lbf/in
IMPORTANT
All information is believed to be accurate but is given without acceptance of liability. All values have been
generated from limited data. The values listed for weight, thickness and breaking strengths are typical greige
values, unless otherwise noted. Users should make their own assessment of the suitability of any product for
the purpose required. All sales are made subject to our standard terms of sales which include limitations on
liability and other important terms. The fabric style listed may not be available from inventory and minimum
order quantities may apply.
FOR FURTHER INFORMATION, PLEASE CONTACT US
1913 North King Street
Seguin, Texas 78155
Phone: 830-379-1580
Fax: 830-379-9544
Customer Service Toll Free: 1-866-601-5430
For European sales office numbers and a full address list, please go to:
http://www.hexcel.com/contact/salesoffices
Hexcel and Hexcel logo are registered trademarks of Hexcel Corporation, Stamford, Connecticut.
HexForce is a trademark of Hexcel Corporation, Stamford, Connecticut.
by | Sep 27, 2025
HexForce
7533
Fiber Glass Fabric
Product Data
STYLE 7533 US System SI Units
Type of Yarns Warp Yarn: ECG 75 1/2 EC9 68×2
Fill Yarn: ECG 75 1/2 EC9 68×2
Fabric Weight, Dry 5.63 oz/yd
2
191 g/m
2
Weave Style Plain
CONSTRUCTION
Nominal Construction Warp Count: 18/in 7.10/cm
Fill Count: 18/in 7.10/cm
Fabric Thickness 7.30 mil 0.20 mm
Breaking Strength Warp 250 lbf/in
Filling 250 lbf/in
IMPORTANT
All information is believed to be accurate but is given without acceptance of liability. All values have been
generated from limited data. The values listed for weight, thickness and breaking strengths are typical greige
values, unless otherwise noted. Users should make their own assessment of the suitability of any product for
the purpose required. All sales are made subject to our standard terms of sales which include limitations on
liability and other important terms. The fabric style listed may not be available from inventory and minimum
order quantities may apply.
FOR FURTHER INFORMATION, PLEASE CONTACT US
1913 North King Street
Seguin, Texas 78155
Phone: 830-379-1580
Fax: 830-379-9544
Customer Service Toll Free: 1-866-601-5430
For European sales office numbers and a full address list, please go to:
http://www.hexcel.com/contact/salesoffices
Hexcel and Hexcel logo are registered trademarks of Hexcel Corporation, Stamford, Connecticut.
HexForce is a trademark of Hexcel Corporation, Stamford, Connecticut.
