by | Sep 27, 2025
6/22/2022
Inspired by Innovation :: Driven by Excellence
BGF INDUSTRIES, INC. 230 Slayton Ave Suite A-1 Danville, Virginia 24540 USA
434-857-4400 toll free: 800-476-4845
www. bgf.com info@bgf.com
Data Sheet Product Information
Style 5285
Finish 618 (Scoured)
Weave Pattern 4-Harness Satin
Fiber Type Aramid
Yarn Description
Warp 1140 Denier Kevlar
Fill 1140 Denier Kevlar
Count: (Ends x Picks)/inch 17.0 x 17.0
Weight 5.00 oz/yd
2
(Nominal)
Breaking Strength
Warp 550 lb/inch
Fill 500 lb/inch
Thickness 0.0095 inch (Nominal)
Values shown are based on typical finished fabric data and
should be only used as a guide, not a specification.
by | Sep 27, 2025
6/21/2023
Inspired by Innovation :: Driven by Excellence
BGF INDUSTRIES, INC. 230 Slayton Ave Suite A-1 Danville, Virginia 24540 USA
434-857-4400 toll free: 800-476-4845
www. bgf.com info@bgf.com
Style 5120
Finish Greige
Weave Pattern Plain
Fiber Type Aramid
Yarn Description
Warp Kevlar
49, 195 Denier
Fill Kevlar
49, 195 Denier
Count
Warp/inch (32-36) 34.0
Fill/inch (32-36) 34.0
Weight (1.6-1.98) 1.7 oz/yd
2
Breaking Strength
Warp 200 lb./inch
Fill 200 lb./inch
Thickness (0.0028-0.0055) 0.0040 inches
Values shown are based on typical Greige fabric data and
should be only used as a guide, not a specification
by | Sep 27, 2025
3/23/2018 1121 – BGF Industries, Inc. – BGF Industries, Inc.
http://www.bgf.com/datasheet/1121/ 1/1
3802 Robert Porcher Way
Greensboro, NC 27410
336-545-0011
800-476-4845
Fax: 336-545-0233
Email: info@bgf.com
Website: www.bgf.com
Data Sheet – Product Information
Style 5120
Finish Untreated
Fiber Type Aramid
Weave Pattern Plain
Density 0
Warp Yarn 195 Denier Kevlar
Fill Yarn 195 Denier Kevlar
Breaking Strength
Warp (lbs/inch) 200
Fill (lbs/inch) 200
Count: Ends x Picks (per inch) 34 X 34
Weight 1.8 (OSY)
Thickness (inch) 0.0039
Values shown are based on typical greige fabric data and
should be used only as a guide, not a specification.
Print Data Sheet
by | Sep 27, 2025
KC-BX 1200-5
Fiber Type:Carbon/Aramid
Architecture:+45 /-45 Double Bias
Total Weight:11.92 oz/sq.yd / 404 g/sq.m
Roll Specifications Fiber Architecture Data
Roll Width: Roll Weight: Roll Length: Carbon -45 :3.12 oz/sq.yd / 106 g/sq.m
50 in. / 1270 mm 116 lbs / 53 kg 109 yd / 100 m Aramid -45 :2.84 oz/sq.yd / 96 g/sq.m
Aramid 45 :2.84 oz/sq.yd / 96 g/sq.m
Carbon 45 :3.12 oz/sq.yd / 106 g/sq.m
* Packaging: Box
**Total weight refers to reinforcement material only (does not include stitching weight).
REV: 7/30/2014
Vectorply Corporation
3500 Lakewood Drive Phenix City, AL 36867
tel. 334-291-7704 fax. 334-291-7743
Disclaimer:
The customer is solely responsible for determining the performance and fitness for a particular use of any product produced by customer utilizing
a reinforcement fabric or material produced or manufactured by Vectorply Corp. Specifications of reinforcements may change without notice.
by | Sep 27, 2025
HexForce
48193
Carbon Fabrics
Product Data
STYLE 48193 US System
Type of Yarns Warp Yarn: 12K Carbon, 33MSI
Fill Yarn: 12K Carbon, 33MSI
Fabric Weight, Dry 5.70 oz/yd
2
193 g/m
2
Weave Style Plain
CONSTRUCTION
Nominal Construction Warp Count: 3/in
Fill Count: 3/in
Fabric Thickness 9.4 mil 0.24 mm
IMPORTANT
All information is believed to be accurate but is given without acceptance of liability. All values have been
generated from limited data. The values listed for weight, thickness and breaking strengths are typical greige
values, unless otherwise noted. Users should make their own assessment of the suitability of any product for
the purpose required. All sales are made subject to our standard terms of sales which include limitations on
liability and other important terms. The fabric style listed may not be available from inventory and minimum
order quantities may apply.
FOR FURTHER INFORMATION, PLEASE CONTACT US
1913 North King Street
Seguin, Texas 78155
Phone: 830-379-1580
Fax: 830-379-9544
Customer Service Toll Free: 1-866-601-5430
For European sales office numbers and a full address list, please go to:
http://www.hexcel.com/contact/salesoffices
Hexcel and Hexcel logo are registered trademarks of Hexcel Corporation, Stamford, Connecticut.
HexForce is a trademark of Hexcel Corporation, Stamford, Connecticut.
by | Sep 27, 2025
by | Sep 27, 2025
HexForce
4700
Fiber Glass Fabric
Product Data
STYLE 4700 US System SI Units
Type of Yarns Warp Yarn: ECG 37 1/0 EC9 134
Fill Yarn: ECG 75 1/2 EC9 68 x2
Fabric Weight, Dry 4.40 oz/yd
2
149 g/m
2
Weave Style Plain
CONSTRUCTION
Nominal Construction Warp Count: 14/in 5.51/cm
Fill Count: 13/in 5.12/cm
Fabric Thickness 4.7 mil 0.12 mm
Breaking Strength Warp 240 lbf/in
Filling 240 lbf/in
IMPORTANT
All information is believed to be accurate but is given without acceptance of liability. All values have been
generated from limited data. The values listed for weight, thickness and breaking strengths are typical greige
values, unless otherwise noted. Users should make their own assessment of the suitability of any product for
the purpose required. All sales are made subject to our standard terms of sales which include limitations on
liability and other important terms. The fabric style listed may not be available from inventory and minimum
order quantities may apply.
FOR FURTHER INFORMATION, PLEASE CONTACT US
1913 North King Street
Seguin, Texas 78155
Phone: 830-379-1580
Fax: 830-379-9544
Customer Service Toll Free: 1-866-601-5430
For European sales office numbers and a full address list, please go to:
http://www.hexcel.com/contact/salesoffices
Hexcel and Hexcel logo are registered trademarks of Hexcel Corporation, Stamford, Connecticut.
HexForce is a trademark of Hexcel Corporation, Stamford, Connecticut.
by | Sep 27, 2025
HexForce
4533
Fiber Glass Fabric
Product Data
STYLE 4533 US System SI Units
Type of Yarns Warp Yarn: SCG 75 1/2 SC9 68 x2
Fill Yarn: SCG 75 1/2 SC9 68 x2
Fabric Weight, Dry 5.60 oz/yd
2
190 g/m
2
Weave Style Plain
CONSTRUCTION
Nominal Construction Warp Count: 18/in 7.08/cm
Fill Count: 18/in 7.08/cm
Fabric Thickness 7.40 mil 0.19 mm
Breaking Strength Warp 300 lbf/in
Filling 300 lbf/in
IMPORTANT
All information is believed to be accurate but is given without acceptance of liability. All values have been
generated from limited data. The values listed for weight, thickness and breaking strengths are typical greige
values, unless otherwise noted. Users should make their own assessment of the suitability of any product for
the purpose required. All sales are made subject to our standard terms of sales which include limitations on
liability and other important terms. The fabric style listed may not be available from inventory and minimum
order quantities may apply.
FOR FURTHER INFORMATION, PLEASE CONTACT US
1913 North King Street
Seguin, Texas 78155
Phone: 830-379-1580
Fax: 830-379-9544
Customer Service Toll Free: 1-866-601-5430
For European sales office numbers and a full address list, please go to:
http://www.hexcel.com/contact/salesoffices
Hexcel and Hexcel logo are registered trademarks of Hexcel Corporation, Stamford, Connecticut.
HexForce is a trademark of Hexcel Corporation, Stamford, Connecticut.
by | Sep 27, 2025
HexForce
4533
Fiber Glass Fabric
Product Data
STYLE 4533 US System SI Units
Type of Yarns Warp Yarn: SCG 75 1/2 SC9 68 x2
Fill Yarn: SCG 75 1/2 SC9 68 x2
Fabric Weight, Dry 5.60 oz/yd
2
190 g/m
2
Weave Style Plain
CONSTRUCTION
Nominal Construction Warp Count: 18/in 7.08/cm
Fill Count: 18/in 7.08/cm
Fabric Thickness 7.40 mil 0.19 mm
Breaking Strength Warp 300 lbf/in
Filling 300 lbf/in
IMPORTANT
All information is believed to be accurate but is given without acceptance of liability. All values have been
generated from limited data. The values listed for weight, thickness and breaking strengths are typical greige
values, unless otherwise noted. Users should make their own assessment of the suitability of any product for
the purpose required. All sales are made subject to our standard terms of sales which include limitations on
liability and other important terms. The fabric style listed may not be available from inventory and minimum
order quantities may apply.
FOR FURTHER INFORMATION, PLEASE CONTACT US
1913 North King Street
Seguin, Texas 78155
Phone: 830-379-1580
Fax: 830-379-9544
Customer Service Toll Free: 1-866-601-5430
For European sales office numbers and a full address list, please go to:
http://www.hexcel.com/contact/salesoffices
Hexcel and Hexcel logo are registered trademarks of Hexcel Corporation, Stamford, Connecticut.
HexForce is a trademark of Hexcel Corporation, Stamford, Connecticut.
by | Sep 27, 2025
HexForce
4522
Fiber Glass Fabric
Product Data
STYLE 4522 US System SI Units
Type of Yarns Warp Yarn: SCG 150 1/2 SC9 34 x2
Fill Yarn: SCG 150 1/2 SC9 34 x2
Fabric Weight, Dry 3.64 oz/yd
2
123 g/m
2
Weave Style Plain
CONSTRUCTION
Nominal Construction Warp Count: 24/in 9.40/cm
Fill Count: 22/in 8.66/cm
Fabric Thickness 5.1 mil 0.13 mm
Breaking Strength Warp 125 lbf/in
Filling 125 lbf/in
IMPORTANT
All information is believed to be accurate but is given without acceptance of liability. All values have been
generated from limited data. The values listed for weight, thickness and breaking strengths are typical greige
values, unless otherwise noted. Users should make their own assessment of the suitability of any product for
the purpose required. All sales are made subject to our standard terms of sales which include limitations on
liability and other important terms. The fabric style listed may not be available from inventory and minimum
order quantities may apply.
FOR FURTHER INFORMATION, PLEASE CONTACT US
1913 North King Street
Seguin, Texas 78155
Phone: 830-379-1580
Fax: 830-379-9544
Customer Service Toll Free: 1-866-601-5430
For European sales office numbers and a full address list, please go to:
http://www.hexcel.com/contact/salesoffices
Hexcel and Hexcel logo are registered trademarks of Hexcel Corporation, Stamford, Connecticut.
HexForce is a trademark of Hexcel Corporation, Stamford, Connecticut.
