by | Sep 27, 2025
Off-the-roll, continuous 45 fabric offering:
Optimal Off-Axis Properties Improved In-Plane Shear & Torsional Performance
Drapability for Compound Curvatures
Reduced Waste & Labor Cutting of 0/90 Fabric on the Bias is Eliminated
BIMAX-L-48
Fabric: 2 x 2 Twill
Raw Material: Bias – AS4C-GP 3K (Hexcel) 97% of weight
Axial Fiberglass Stabilizing Yarns (every 4
th
position) 3% of weight
Link to carbon fiber datasheet:
https://www.hexcel.com/user_area/content_media/raw/AS4C_Aerospace_HexTow_DataSheet.pdf
Fabric Width: 48
Braid Angle: +/-45
Braid Yield: 2.1 yd/lb (4.2 m/kg)
Areal Weight: 194 GSM
Layer Thickness (@55%FV): .01 (.20 mm)
Standard Fabric Tolerances
Yield Tolerance: +/-5%
Angle Tolerance: +/-3
Standard Packaging on 6 Cores
Additional Quality Specifications available upon request
For more information, please visit www.braider.com, or contact a sales representative at
sales@braider.com or 513-688-3200
All technical information and data contained herein is believed accurate and reliable. However, the accuracy and completeness
of this information is not guaranteed and is subject to change without notice. A&P Technology shall not be liable for injury, loss
or damage whether direct or consequential arising out of use of the data provided herein.
by | Sep 27, 2025
TECHNICAL DATASHEET
SAP No. 30008912 Article Description X-C-410g/m -1270mm
Textile Structure 7008691 SAERTEX
ARTICLE CONSTRUCTION (in accordance with EN 13473-1)
Layer Construction Areal weight Tolerance Material
4 45 200 g/m +/- 5.0 % Teijin Carbon HTS40 F13 12K
3 90 1 g/m +/- 5.0 % E-glass 68 TEX
2 0 3 g/m +/- 5.0 % E-glass 68 TEX
1 -45 200 g/m +/- 5.0 % Teijin Carbon HTS40 F13 12K
Stitching 6 g/m +/- 1 g/m PES [Polyester] 76 dtex
FURTHER CHARACTERISTICS
Gauge 5.0 Stitching pattern warp Width (nominal) 1270 mm
Stitch length 2.02 mm Total tolerance 5.2 % Total areal weight 410 g/m
Labelling (Standard) Every roll is equipped with a label in the core. A further label is located outside on
the foil or on the box.
Packaging (Standard) Every roll is wound on a cardboard core and wrapped in foil. Further packaging
options can be determined individually.
Storage With original packaging: No moisture recommendation and direct sunlight.
To avoid problems with humidity and electrostatic charge, fabrics to be
conditioned 24 hours prior to processing, independent of storage conditions.
– Confidential Information –
SAERTEX USA, LLC. has been certified in accordance with ISO 9001:2015.
REINFORCING YOUR IDEAS
by | Sep 27, 2025
TECHNICAL DATASHEET
SAP No. 30005508 Article Description X-C-604g/m -1270mm
Textile Structure 7005769 SAERTEX
ARTICLE CONSTRUCTION (in accordance with EN 13473-1)
Layer Construction Areal weight Tolerance Material
4 45 298 g/m +/- 5.0 % HEXCEL HexTow IM2C GS 12K
3 90 1 g/m +/- 5.0 % E-glass 68 TEX
2 0 1 g/m +/- 5.0 % E-glass 68 TEX
1 -45 298 g/m +/- 5.0 % HEXCEL HexTow IM2C GS 12K
Stitching 6 g/m +/- 1 g/m PES [Polyester] 76 dtex
FURTHER CHARACTERISTICS
Gauge 5.0 Stitching pattern warp Width (nominal) 1270 mm
Stitch length 2.60 mm Total tolerance 5.1 % Total areal weight 604 g/m
Labelling (Standard) Every roll is equipped with a label in the core. A further label is located outside on
the foil or on the box.
Packaging (Standard) Every roll is wound on a cardboard core and wrapped in foil. Further packaging
options can be determined individually.
Storage With original packaging: No moisture recommendation and direct sunlight.
To avoid problems with humidity and electrostatic charge, fabrics to be
conditioned 24 hours prior to processing, independent of storage conditions.
– Confidential Information –
SAERTEX USA, LLC. has been certified in accordance with ISO 9001:2015.
REINFORCING YOUR IDEAS
by | Sep 27, 2025
TECHNICAL DATASHEET
SAP No. 30005181 Article Description X-C-410g/m -1270mm
Textile Structure 7005521 SAERTEX
ARTICLE CONSTRUCTION (in accordance with EN 13473-1)
Layer Construction Areal weight Tolerance Material
4 45 200 g/m +/- 5.0 % Teijin Carbon Europe HTS45 E23 12K
3 90 1 g/m +/- 5.0 % E-glass 68 TEX
2 0 3 g/m +/- 5.0 % E-glass 68 TEX
1 -45 200 g/m +/- 5.0 % Teijin Carbon Europe HTS45 E23 12K
Stitching 6 g/m +/- 1 g/m PES [Polyester] 76 dtex
FURTHER CHARACTERISTICS
Gauge 5.0 Stitching pattern warp Width (nominal) 1270 mm
Stitch length 2.02 mm Total tolerance 5.2 % Total areal weight 410 g/m
Labelling (Standard) Every roll is equipped with a label in the core. A further label is located outside on
the foil or on the box.
Packaging (Standard) Every roll is wound on a cardboard core and wrapped in foil. Further packaging
options can be determined individually.
Storage With original packaging: No moisture recommendation and direct sunlight.
To avoid problems with humidity and electrostatic charge, fabrics to be
conditioned 24 hours prior to processing, independent of storage conditions.
– Confidential Information –
SAERTEX USA, LLC. has been certified in accordance with ISO 9001:2015.
REINFORCING YOUR IDEAS
by | Sep 27, 2025
All information contained in this publication is based upon tests carried out by Colan Products, independent testing authorities or other suppliers.
This information is believed to be correct and reliable at time of printing.
Colan requires that users establish the suitability of all products for their applications and assume all risks.
P R O D U C T D E T A I LS
Flax provides high levels of performance, coupled with the ease of processing
normally associated with glass-reinforced materials. The materials use low-twist
technology to provide a combination of sustainability, performance and
processability not previously seen in composites. Compared to Glass Fibre
composites, Flax offers reduced weight, improved environmental impact,
vibration damping, similar specific stiffness and safer handling.
ITEM CODE: AXF203076
WEAVE: 2×2 Twill
CONSTRUCTION: 32 x 27 ends per inch
WEIGHT: 100 g/m (3 oz/yd )
WIDTH: 760mm (30 )
THICKNESS: 0.4 mm (0.016 )
ROLL LENGTH: 50 metres (54.7 yd)
FINISH: Loomstate (Untreated)
by | Sep 27, 2025
All information contained in this publication is based upon tests carried out by Colan Products, independent testing authorities or other suppliers.
This information is believed to be correct and reliable at time of printing.
Colan requires that users establish the suitability of all products for their applications and assume all risks.
P R O D U C T D E T A I LS
Flax provides high levels of performance, coupled with the ease of processing
normally associated with glass-reinforced materials. The materials use low-twist
technology to provide a combination of sustainability, performance and
processability not previously seen in composites. Compared to Glass Fibre
composites, Flax offers reduced weight, improved environmental impact,
vibration damping, similar specific stiffness and safer handling.
ITEM CODE: AXF202076
WEAVE: Twill
CONSTRUCTION: 2×2
WEIGHT: 100 g/m (3 oz/yd )
WIDTH: 760mm (30 )
THICKNESS: 0.2 mm (0.008 )
ROLL LENGTH: 50 metres (54.7 yd)
FINISH: Loomstate (Untreated)
All information contained in this publication is based upon tests carried out by Colan Products, independent testing authorities or other suppliers.
This information is believed to be correct and reliable at time of printing.
Colan requires that users establish the suitability of all products for their applications and assume all risks.
M E C H A N I C A L P R O P E R T I E S
Typical mechanical properties of moulded laminates
FIBRE VOLUME FRACTION: 24 %
DENSITY: 1.27 g/cm
TENSILE MODULUS: 11 GPa (ISO 527-4)
TENSILE STRENGTH: 98 MPa (ISO 527-4)
ELONGATION: 1.3 %
FLEXURAL MODULUS: 8.7 GPa (ISO 14125)
FLEXURAL STRENGTH: 127 MPa (ISO 14125)
Data from vacuum infused laminates using unsaturated polyester resin,
tested at ambient temperature.
by | Sep 27, 2025
HexForce
AGP370-5H
Carbon Fabric
Product Data
STYLE AGP370-5H US System
Type of Yarns Warp Yarn: Hexcel
AS4 GP 6K
Fill Yarn: Hexcel
AS4 GP 6K
Fabric Weight, Dry 11.10 oz/yd
2
376 g/m
2
Weave Style 5 Harness Satin
CONSTRUCTION
Nominal Construction Warp Count: 11/in
Fill Count: 11/in
Fabric Thickness 16.0 mil 0.41 mm
IMPORTANT
All information is believed to be accurate but is given without acceptance of liability. All values have been
generated from limited data. The values listed for weight, thickness and breaking strengths are typical greige
values, unless otherwise noted. Users should make their own assessment of the suitability of any product for
the purpose required. All sales are made subject to our standard terms of sales which include limitations on
liability and other important terms. The fabric style listed may not be available from inventory and minimum
order quantities may apply.
FOR FURTHER INFORMATION, PLEASE CONTACT US
1913 North King Street
Seguin, Texas 78155
Phone: 830-379-1580
Fax: 830-379-9544
Customer Service Toll Free: 1-866-601-5430
For European sales office numbers and a full address list, please go to:
http://www.hexcel.com/contact/salesoffices
Hexcel and Hexcel logo are registered trademarks of Hexcel Corporation, Stamford, Connecticut.
HexForce is a trademark of Hexcel Corporation, Stamford, Connecticut.
by | Sep 27, 2025
All information contained in this publication is based upon tests carried out by Colan Products, independent testing authorities or other suppliers.
This information is believed to be correct and reliable at time of printing.
Colan requires that users establish the suitability of all products for their applications and assume all risks.
P R O D U C T D E T A I LS
ITEM CODE: AF211AIS076
WEAVE: Plain
CONSTRUCTION: 26 x 22 ends per inch
YARN COUNT:
Warp 1: 68 x 1 E-Glass (TD37)
Warp 2: 625 den Innegra (S)
Weft : 34 x 2 Tex E-Glass (TD37)
WEIGHT: 135 g/m
WIDTH: 685 mm
THICKNESS: 0.13 mm
ROLL LENGTH: 100 metres
FINISH: Hi-clear
by | Sep 27, 2025
HexForce
TM
ACGP370-8H
Carbon Fabric
Style ACGP370-8H US System
Type of Yarns Warp Yarn: Hexcel AS4C GP 3K
Fill Yarn: Hexcel AS4C GP 3K
Fabric Weight, Dry 10.91 oz/yd
2
370 g/m
2
Weave Style 8 Harness Satin
Construction
Nominal Construction Warp Count: 24.0/in 9.45/cm
Fill Count: 23.0/in 9.06/cm
Important
All information is believed to be accurate but is given without acceptance of liability. All values have been generated
from limited data. The values listed for weight, thickness and breaking strengths are typical greige values, unless
otherwise noted. Users should make their own assessment of the suitability of any product for the purpose required.
All sales are made subject to our standard terms of sales which include limitations on liability and other important
terms. The fabric style listed may not be available from inventory and minimum order quantities may apply.
For More Information
Hexcel is a leading worldwide supplier of composite materials to aerospace and other demanding industries.
Our comprehensive product range includes:
Carbon Fiber
Reinforced Fabrics
Carbon, Glass, Aramid and Hybrid Prepregs
RTM Materials
HexTOOL
composite tooling material
Structural Film Adhesives
Honeycomb Cores
Engineered Core
1913 North King Street
Seguin, Texas 78155
Phone: 830-379-1580
Fax: 830-379-9544
Customer Service Toll Free: 1- 866-601-5430
For European sales office numbers and a full address list, please go to:
http://www.hexcel.com/contact/salesoffices
Copyright 2014 Hexcel and Hexcel logo are registered trademarks of Hexcel Corporation, Stamford, Connecticut.
HexForce is a trademark of Hexcel Corporation, Stamford, Connecticut.
June 2014
by | Sep 27, 2025
HexForce
TM
ACGP135-P
Carbon Fabric
Style ACGP135-P US System
Type of Yarns Warp Yarn: Hexcel AS4C GP 3K (3000)
Fill Yarn: Hexcel AS4C GP 3K (3000)
Fabric Weight, Dry 3.99 oz/yd
2
135 g/m
2
Weave Style Plain
Construction
Nominal Construction Warp Count: 8.6/in 3.39/cm
Fill Count: 8.6/in 3.39/cm
Important
All information is believed to be accurate but is given without acceptance of liability. All values have been generated
from limited data. The values listed for weight, thickness and breaking strengths are typical greige values, unless
otherwise noted. Users should make their own assessment of the suitability of any product for the purpose required.
All sales are made subject to our standard terms of sales which include limitations on liability and other important
terms. The fabric style listed may not be available from inventory and minimum order quantities may apply.
For More Information
Hexcel is a leading worldwide supplier of composite materials to aerospace and other demanding industries.
Our comprehensive product range includes:
Carbon Fiber
Reinforced Fabrics
Carbon, Glass, Aramid and Hybrid Prepregs
RTM Materials
HexTOOL
composite tooling material
Structural Film Adhesives
Honeycomb Cores
Engineered Core
1913 North King Street
Seguin, Texas 78155
Phone: 830-379-1580
Fax: 830-379-9544
Customer Service Toll Free: 1- 866-601-5430
For European sales office numbers and a full address list, please go to:
http://www.hexcel.com/contact/salesoffices
Copyright 2014 Hexcel and Hexcel logo are registered trademarks of Hexcel Corporation, Stamford, Connecticut.
HexForce is a trademark of Hexcel Corporation, Stamford, Connecticut.
June 2014
