by | Sep 27, 2025
HexForce
TM
ACGP135-P
Carbon Fabric
Style ACGP135-P US System
Type of Yarns Warp Yarn: Hexcel AS4C GP 3K (3000)
Fill Yarn: Hexcel AS4C GP 3K (3000)
Fabric Weight, Dry 3.99 oz/yd
2
135 g/m
2
Weave Style Plain
Construction
Nominal Construction Warp Count: 8.6/in 3.39/cm
Fill Count: 8.6/in 3.39/cm
Important
All information is believed to be accurate but is given without acceptance of liability. All values have been generated
from limited data. The values listed for weight, thickness and breaking strengths are typical greige values, unless
otherwise noted. Users should make their own assessment of the suitability of any product for the purpose required.
All sales are made subject to our standard terms of sales which include limitations on liability and other important
terms. The fabric style listed may not be available from inventory and minimum order quantities may apply.
For More Information
Hexcel is a leading worldwide supplier of composite materials to aerospace and other demanding industries.
Our comprehensive product range includes:
Carbon Fiber
Reinforced Fabrics
Carbon, Glass, Aramid and Hybrid Prepregs
RTM Materials
HexTOOL
composite tooling material
Structural Film Adhesives
Honeycomb Cores
Engineered Core
1913 North King Street
Seguin, Texas 78155
Phone: 830-379-1580
Fax: 830-379-9544
Customer Service Toll Free: 1- 866-601-5430
For European sales office numbers and a full address list, please go to:
http://www.hexcel.com/contact/salesoffices
Copyright 2014 Hexcel and Hexcel logo are registered trademarks of Hexcel Corporation, Stamford, Connecticut.
HexForce is a trademark of Hexcel Corporation, Stamford, Connecticut.
June 2014
by | Sep 27, 2025
All information contained in this publication is based upon tests carried out by Colan Products, independent testing authorities or other suppliers.
This information is believed to be correct and reliable at time of printing.
Colan requires that users establish the suitability of all products for their applications and assume all risks.
P R O D U C T D E T A I LS
ITEM CODE: AC210050
WEAVE: Plain
CONSTRUCTION: 12.5 x 12.5 ends per inch
YARN COUNT: Warp: 200 Tex Carbon (3K)
Weft : 200 Tex Carbon (3K)
WEIGHT: 200 g/m
WIDTH: 50 mm
THICKNESS: 0.3 mm
ROLL LENGTH: 50 metres
FINISH: Loomstate
by | Sep 27, 2025
All information contained in this publication is based upon tests carried out by Colan Products, independent testing authorities or other suppliers.
This information is believed to be correct and reliable at time of printing.
Colan requires that users establish the suitability of all products for their applications and assume all risks.
P R O D U C T D E T A I LS
ITEM CODE: ABF211
WEAVE: Plain
CONSTRUCTION: 26 x 22 ends per inch
YARN COUNT: Warp: Basalt
Weft: Basalt
WEIGHT: 127 g/m
WIDTH: 685 & 760 mm
THICKNESS: 0.15 mm
ROLL LENGTH: 100 metres
FINISH: Loomstate
TEMPERATURE RATING: -260 C ~ 650 C
by | Sep 27, 2025
6/24/2022
Inspired by Innovation :: Driven by Excellence
BGF INDUSTRIES, INC. 230 Slayton Ave Suite A-1 Danville, Virginia 24540 USA
434-857-4400 toll free: 800-476-4845
www. bgf.com info@bgf.com
Data Sheet Product Information
Style 4003
Fiber Type E-Glass
Density 6 lb/ ft
3
Weight 4.0 oz./ft
2
Thickness 0.50 inch
Values shown are based on typical Nonwoven data and
should be only used as a guide, not a specification.
by | Sep 27, 2025
3/13/2023
Inspired by Innovation :: Driven by Excellence
BGF INDUSTRIES, INC. 230 Slayton Ave Suite A-1 Danville, Virginia 24540 USA
434-857-4400 toll free: 800-476-4845
www. bgf.com info@bgf.com
Data Sheet Product Information
Style 4007 (NG025A)
Fiber Type 100% E-Glass
Density 6.0 lb./ ft
3
Weight 2.0 oz/ft
2
Thickness 0.25 inch
Values shown are based on typical non-Woven data and
should be only used as a guide, not a specification.
by | Sep 27, 2025
6/23/2022
Inspired by Innovation :: Driven by Excellence
BGF INDUSTRIES, INC. 230 Slayton Ave Suite A-1 Danville, Virginia 24540 USA
434-857-4400 toll free: 800-476-4845
www. bgf.com info@bgf.com
Data Sheet Product Information
Style 94933
Weave Pattern 2 x 2 Twill
Fiber Type Carbon
Yarn Description
Warp 3K (Std Modulus)
Fill 3K (Std Modulus)
Count: (Ends x Picks)/inch 13.0 x 13.0 (+/- 1)
Weight 210 GSM (+/- 5) (with sizing)
Values shown are based on typical GREIGE fabric data and
Is suitable for use as a specification.
by | Sep 27, 2025
HexPly
M77HF
Quick Cure Epoxy System for Industrial Applications
Product Data Sheet
Description
HexPly
M77HF prepreg is a fiber-reinforced modified epoxy resin system specifically designed for bladder
molding or sheet wrap tube applications. Unique chemistry provides fully cured parts in only 3 minutes at 300 F
(149 C).
Features
Quick cure, 3 minutes at 300 F (149 C)
Available in wide variety of carbon or glass tapes and fabrics
High temperature stability for hot de-mold
Low viscosity, 10 poise at 230 F (110 C)
Applications
Neat Resin Properties
Neat Resin Property HexPly
M77HF
Specific Gravity 1.34
Glass Transition Temperature-DMTA, F ( C) 266 (130)
Tensile Strength, ksi (MPa) 11.8 (81)
Tensile Modulus, Msi (GPa) 0.50 (3.45)
Tensile Strain, % 3.7
K
1C
Fracture Toughness, ksi-in
1/2
(MPa-m
1/2
) 1.28 (1.41)
Cure Time at 300 F, minutes 3
Cure Time at 275 F, minutes 5
Cure Time at 225 F, minutes 30
Gel Time vs. Temperature
1
Golf Shafts
Bicycle Components
Hockey Sticks
Arrow Shafts
Fishing Rods
Prosthetics
Copyright 2017 Hexcel Corporation All Rights Reserved.
Tool Temp Gel Time Cure Time in V (poise)
250 6.5 10
260 4 6 8
275 3 5 5
250 260 275 300
Product Data Sheet
2
Viscosity at Different Heat Up Rates
Availability
HexPly
M77HF is available in natural color, black and green and a wide variety of carbon or glass tapes and
fabrics. The currently made products are:
Form
Hexcel
Designation
Fiber
Fiber Areal
Wt. g/m
2
Weave
Count
Warp x Fill
Widths
Available In
(cm)
Resin
Content
%
Glass
Fabric
6543GL/M77HF-
12G
SCG 75 1/2 x
ECE 225 1/0
288 4H Satin 48 x 30 38 (96.5) 32
6557GL/M77HF-
12G
SCG 150 1/2 x
ECE 225 1/0
180 4H Satin 57 x 30 38 (96.5) 33
7781GL/M77HF-7B ECDE 75 1/0 301 8H Satin 57 x 54 50 (127) 45
Carbon
Fabric
W3X 282/M77HFS 3K 33MSI 197 Plain 12 x 12 50 (127) 40
Carbon
Tape
AS4AGP6K/M77HF 6K 80 Tape n/a 24 (61) 38
AS4AGP12K/
M77HF
12K 120, 150 Tape n/a 24 (61) 38
IM2C-GS/M77HF IM2C-GS 110 Tape n/a 24 (61) 40
Copyright 2017 Hexcel Corporation All Rights Reserved.
HexPly
M77HF
Quick Cure Epoxy System for Industrial Applications
Product Data Sheet
3
Mechanical Properties
Prepreg
CHS/M77HF;
35%;150AW
MS40/M77HF;
31%;120AW
IM4/M77HF;
31%;120AW
CHS24K/M77HF;
36%;150AW
Fiber AS4C MS40 IM4 T600
FAW (gsm) 150 120 120 150
Tensile Strength,
ksi (GPa)
336 (2.32) 372 (2.56) 323 (2.23)
329 (2.27)
Tensile Modulus,
Msi (GPa)
18.1 (125) 26.7 (184) 21.1 (145)
17.1 (118)
Compression Strength,
ksi (GPa)
218 (1.50) 233 (1.61) 222 (1.53)
240 (1.65)
Compression Modulus,
Msi (GPa)
16.9 (117) 24.3 (168) 20.0 (138)
17.8 (123)
Short Beam Shear,
ksi (MPa)
12.2 (84.1) 12.2 (84.1) 12.4 (85.5)
12.9 (88.9)
Flexural Strength,
ksi (Gpa)
191 (1.32) 193 (1.33) 203 (1.40)
214 (1.48)
Flexural Modulus,
Msi (GPa)
16.9 (117) 24 (165) 19.2 (132)
16.5 (114)
1. Normalized to 55% fiber volume 2.75 F, dry.
Cure Cycle
HexPly
M77HF is designed to be cured using bladder molding, cello wrap, compression molding, or autoclave
conditions. The standard autoclave cure is 10 minutes at 250 F (121 C) with 85 psig minimum pressure.
*At higher elevations 22 inches Hg may be impossible to reach, in which case 20 inches Hg is permissible.
Alternative Cure Cycles:
1) 3 minutes at 300 F (149 C)
2) 6 minutes at 260 F (127 C)
3) 10 minutes at 250 F (121 C)
300
250
0 20 40 60 80 100 130
200
150
100
50
0
Time (minutes)
Hold 10 min
250 F
120 F
Heat-up
2-5 F/min
Cool-down
5 F/min
22 F in Hg vacuum to start;
Vent when pressure reaches 20 psig
85-100 psig
Copyright 2017 Hexcel Corporation All Rights Reserved.
HexPly
M77HF
Quick Cure Epoxy System for Industrial Applications
2017 Hexcel Corporation All rights reserved. Hexcel Corporation and its subsidiaries ( Hexcel ) believe that the technical data and other information
provided herein was materially accurate as of the date this document was issued. Hexcel reserves the right to update, revise or modify such technical data and
information at any time. Any performance values provided are considered representative but do not and should not constitute a substitute for your own testing of
the suitability of our products for your particular purpose. Hexcel makes no warranty or representation, express or implied, including but not limited to
the implied warranties of merchantability and fitness for a particular purpose, and disclaims any liability arising out of or related to, the use of or
reliance upon any of the technical data or information contained in this document.
For more information
Hexcel is a leading worldwide supplier of composite materials to aerospace and industrial markets.
Our comprehensive range includes:
For US quotes, orders and product information call toll-free 1-800-688-7734. For other worldwide sales office
telephone numbers and a full address list, please go to:
http://www.hexcel.com/contact/salesoffice
Product Data Sheet
4
Storage
Shelf Life: 12 months at 0 F (-18 C)
Out Life: 30 days at 73 F (23 C)
Tack Life: 10 days at 73 F (23 C)
Storage Conditions
HexPly
M77HF prepregs should be stored as received in a cool dry place or in a refrigerator. After removal from
refrigerator storage, prepreg should be allowed to reach room temperature before opening the polythene bag,
thus preventing condensation. (A full creel in its packaging can take up to 48 hours).
Precautions for Use
The usual precautions when handling uncured synthetic resins and fine fibrous materials should be observed,
and a Safety Data Sheet is available for this product. The use of clean disposable inert gloves provides protection
for the operator and avoids contamination of material and components.
Shipping
Prepreg is generally shipped in a sealed polyethylene bag in refrigerated transportation or in containers with dry ice.
Disposal of Scrap
Disposal of this material should be in a secure landfill in accordance with state and federal regulations.
FTI 409 AG17
HexPly
M77HF
Quick Cure Epoxy System for Industrial Applications
HexTow
carbon fibers
HexForce
reinforcements
HexPly
prepregs
HexMC
molding compounds
HexFlow
RTM resins
Redux
adhesives
HexTool
tooling materials
HexWeb
honeycombs
Acousti-Cap
sound
attenuating honeycomb
Engineered core
Engineered products
by | Sep 27, 2025
1/5/2023
Inspired by Innovation :: Driven by Excellence
BGF INDUSTRIES, INC. 230 Slayton Ave Suite A-1 Danville, Virginia 24540 USA
434-857-4400 toll free: 800-476-4845
www. bgf.com info@bgf.com
Data Sheet Product Information
Style 94140
Finish Untreated
Weave Pattern 2×2 Twill
Fiber Type Carbon
Warp Yarn 12K 33 MSI
Fill Yarn 12K 33 MSI
Count: (Ends x Picks)/inch 10.0 X 10.0
Weight 650 (GSM)
Values shown are based on typical Greige fabric data and
should be only used as a guide, not a specification.
by | Sep 27, 2025
HexForce
7781
Fiber Glass Fabric
Product Data
STYLE 7781 US System SI Units
Type of Yarns Warp Yarn: ECDE 75 1/0 EC6 66
Fill Yarn: ECDE 75 1/0 EC6 66
Fabric Weight, Dry 8.81 oz/yd
2
299 g/m
2
Weave Style 8 Harness Satin
CONSTRUCTION
Nominal Construction Warp Count: 57/in 22.44/cm
Fill Count: 54/in 21.25/cm
Fabric Thickness 8.6 mil 0.22 mm
Breaking Strength Warp 570 lbf/in
Filling 450 lbf/in
IMPORTANT
All information is believed to be accurate but is given without acceptance of liability. All values have been
generated from limited data. The values listed for weight, thickness and breaking strengths are typical greige
values, unless otherwise noted. Users should make their own assessment of the suitability of any product for
the purpose required. All sales are made subject to our standard terms of sales which include limitations on
liability and other important terms. The fabric style listed may not be available from inventory and minimum
order quantities may apply.
FOR FURTHER INFORMATION, PLEASE CONTACT US
1913 North King Street
Seguin, Texas 78155
Phone: 830-379-1580
Fax: 830-379-9544
Customer Service Toll Free: 1-866-601-5430
For European sales office numbers and a full address list, please go to:
http://www.hexcel.com/contact/salesoffices
Hexcel and Hexcel logo are registered trademarks of Hexcel Corporation, Stamford, Connecticut.
HexForce is a trademark of Hexcel Corporation, Stamford, Connecticut.
by | Sep 27, 2025
HexForce
7781
Fiber Glass Fabric
Product Data
STYLE 7781 US System SI Units
Type of Yarns Warp Yarn: ECDE 75 1/0 EC6 66
Fill Yarn: ECDE 75 1/0 EC6 66
Fabric Weight, Dry 8.81 oz/yd
2
299 g/m
2
Weave Style 8 Harness Satin
CONSTRUCTION
Nominal Construction Warp Count: 57/in 22.44/cm
Fill Count: 54/in 21.25/cm
Fabric Thickness 8.6 mil 0.22 mm
Breaking Strength Warp 570 lbf/in
Filling 450 lbf/in
IMPORTANT
All information is believed to be accurate but is given without acceptance of liability. All values have been
generated from limited data. The values listed for weight, thickness and breaking strengths are typical greige
values, unless otherwise noted. Users should make their own assessment of the suitability of any product for
the purpose required. All sales are made subject to our standard terms of sales which include limitations on
liability and other important terms. The fabric style listed may not be available from inventory and minimum
order quantities may apply.
FOR FURTHER INFORMATION, PLEASE CONTACT US
1913 North King Street
Seguin, Texas 78155
Phone: 830-379-1580
Fax: 830-379-9544
Customer Service Toll Free: 1-866-601-5430
For European sales office numbers and a full address list, please go to:
http://www.hexcel.com/contact/salesoffices
Hexcel and Hexcel logo are registered trademarks of Hexcel Corporation, Stamford, Connecticut.
HexForce is a trademark of Hexcel Corporation, Stamford, Connecticut.
