by | Sep 27, 2025
Technical Data Sheet
BENOX
A-70
Dibenzoyl Peroxide/Water wet granules
CAS# 94-36-0
Solid
Description
BENOX
A-70 is a free flowing, water-wet granular forms of dibenzoyl
peroxide. In this form, this product are less flammable and shock sensitive
than granular formulas containing little or no water. This Benox dibenzoyl
peroxide products can be used as polymerization initiators for vinyl monomers
and unsaturated polyester resins when the presence of water is not
detrimental.
Technical Data
Dibenzoyl Peroxide Content: 67-70
Water Content: 30-33
Assay: 99
Active Oxygen: 4.4-4.6
Form: Fine, free-flowing
Color: White
Iron, dry basis, max: 10 ppm
Total Chloride(as NaCI) 1500 ppm
Dry basis, max
Organic Chloride(as BzCI) 1100 ppm
Dry basis, max
Hydrogen Chorlide, dry basis: 0.04
Benzoic Acid, dry basis: 0.30
Soluble In: Organic Solvents
(water compatibility varies with solvent concentration)
Insoluble In: Water
SADT: >176 F (80 C)
Storage Temp: <80 F(27 C)
Max Transport Temp: <80 F(27 C)
Technical Data Sheet
CHEMICAL STRUCTURE
Molecular Weight 242.2 CAS No. 94-36-0
THERMAL DECOMPOSITION DATA (Half life in benzene):
Temperature ( C) 60 70 80 90 100 110
Hours 43 13 4 1 0.4 0.1
Half-life data is generated by using 0.2 moles/liter of the specific peroxide
dissolved in a solvent, generally benzene. The half-life of this highly diluted
peroxide is the time required for decomposition of one-half of the peroxide.
The rate of decomposition is directly related to the rate of generation of free
radicals, and this half-life data can provide guidance in the selection of the
optimum peroxide for a given application. This half-life data is specific to the
solvent used and applies to thermal decomposition rather than activated
decomposition.
Application
BENOX
A-70 product can be used as free radical polymerization initiators and
cross-linking agents in a wide variety of applications. The water wet dibenzoyl
peroxide dissolves more rapidly than the dry form of the product. The water
separates and settles to the bottom where it can be withdrawn if desired.
BENOX
A-70 is an effective initiator in the polymerization and co-polymerization
of numerous vinyl monomers which include styrene, methyl methacrylate,
acrylic esters, acrylonitrile, vinyl acetate, vinyl chloride, and ethylene. Typical
use levels are 0.1% to 2.0% in bulk, solution, emulsion and suspension
polymerizations that operate at temperatures from 180 F/82 C to 300 F/149 C.
Dibenzoyl peroxide is also used in chemical reactions that produce styrenated
and methacrylated alkyd resins and other epoxy resin esters. Other uses
include drying agents for printing inks, bleaching agents, pharmaceutical
preparations, organic chemical synthesis, and vulcanization of natural and
synthetic rubbers.
One of the more frequent uses of dibenzoyl peroxide is for the free radical
initiated polymerization and cross-linking of vinyl monomer unsaturated
polyester resin systems. Generally, the granular dibenzoyl peroxide is dispersed
in the vinyl monomer before addition to the monomer/resin system. Dibenzoyl
peroxide may be used as an elevated temperature cure initiator or ambient
temperature cure initiator after addition of an amine accelerator (e.g.
Technical Data Sheet
dimethylaniline) to the resin system. Use levels of peroxide initiator are from
0.75% to 2.0% (dry weight basis) on the weight of resin.
CAUTION: NEVER MIX PROMOTERS AND PEROXIDES DIRECTLY
TOGETHER. RAPID DECOMPOSITION RESULTING IN FIRE AND/OR
EXPLOSION WILL OCCUR!
BENOX
A-70 product is an excellent ambient temperature initiators when used
in two-pot spray systems for unsaturated polyester resins. The accelerator is
mixed with the resin in one side while the peroxide initiator is added to the
second side. The two sides are then combined through a mixed chamber in the
spray gun immediately prior to spraying.
SPECIAL NOTE
Users of BENOX
A-70 should be aware that after packaging, the water in the
product would migrate to the bottom of the package. As a result, the assay of
dibenzoyl peroxide will vary from the top to the bottom of the package.
Therefore, if less than a package of BENOX
A-70 is to be used, the material
should be well mixed before removing the required amount of the product.
PACKAGING, SHIPPING & AVAILABILITY
The standard package sizes of BENOX
A-70 Granular Product is
cases of 1x25 lb. polyethylene bag inside a fiberboard container. For
custom package sizes, please contact your local distributor or United
Initiators Inc.
Classification Please refer to the specific BENOX
A-70 Safety Data
Sheet (SDS) under section 14 & 15, shipping & regulatory information.
NOTE: SDS s for all United Initiators, Inc. products may be requested
by contacting the company.
BENOX
A-70 is available through a global network. Call United
Initiators, Inc. for the name of the distributor in your area.
This information and our application-technical advice whether verbal, in writing or by way of trials reflect our present state of knowledge based on internal tests with local raw
materials. Their purpose is to inform interested parties about our products and their possible application. They should not be construed as guaranteeing specific product properties or
their suitability for a particular application. Furthermore, the information does not contain complete instructions for use. Nor does it constitute a guarantee as to quality and durability.
Changes due to technical progress and corporate advancement reserved. Any existing third-party copyrights are to be taken into account.
Application and use of our products based on our application-specific advice is beyond our control and sole responsibility of the user. The user is not released from the obligation of
verifying the suitability and applicability as to the intended purpose.
T: +49 89 74422 237
F: +49 89 74422 6237
cs-initiators.eu@united-in.com
T: +1 800 231 2702
F. +1 440 323 0898
cs-initiators.nafta@united-in.com
T: +86 20 6131 1370
F: +86 139 2503 8952
cs-initiators.cn@united-in.com
T: +61 2 9316 0046
F: +61 2 9316 0034
cs-initiators.au@united-in.com
www.united-initiators.com
Revision number: 2.0. Date: 05.02.2020. Device M: TDS.
by | Sep 27, 2025
TS.SP.02.08US/27.09.2022/03
Yenibosna Merkez Mah. Ladin Sok. No:36/70 Townofis
34197 Bah elievler / STANBUL / TURKEY
t. +90 212 580 5559 f. +90 212 580 5521
www.akpakimya.com e. info@akpakimya.com
AKPEROX A5R
Description : Methyl Ethyl Ketone Peroxide Phthalate Free Solution in special mineral solvent
Specifications;
Density (@20 C) : 1,00 0,005 gr/cm
3
Appearance : Colorless, Liquid
Diluent : 2,2,4-trimethyl-1,3-pentanediol diisobutyrate
Active Oxygen Content : 8,5 – 8,95 %
Peroxide Content : 33 – 37 %
SADT : 60 C
CAS Nr. : 1338-23-4
EINECS/ELINCS Nr : 700-954-4
REACH Reg. No : 01-2119514691-43-0007
UN No. : 3105
Application : AKPEROX A5R is a Phthalate Free type MEKP. It is used for the curing of
unsaturated polyester (UP) resins at room and high temperatures in existence of
Cobalt accelerator. Applicable to be used in general purpose applications.
Recommended to be used during production of composite materials which
directly get in contact with human body such as buttons, water tanks etc in point
of Phthalate Free specialty.
Usage & Amount : It is recommended to use 1% – 2% in general, depending on application. Needs to
be used with Cobalt accelerators at room temperature. (E.g. AKCOBALT 1%)
Packaging : 30 Kgs Jerry Can, 5 Kgs Jerry Can, 4×5 Kg in a Carton Box.
Handling & Storage : Must be kept between +5 C and +30 C. Keep pails tightly closed. Store and
handle in a dry, well-ventilated place. Keep away from sources of heat, ignition
and direct sunlight in original packaging. Provide grounding and venting in order to
prevent static electricity build-up. Avoid any contact with Amine and Cobalt
Accelerators, acids, alkalis and heavy metal compounds such as driers and metal
soaps. Storage Class; IIA
Shelf Life : At least 12 Months
For unopened packages at recommended storage conditions.
by | Sep 27, 2025
Technical Data Sheet
NOROX
MEKP-9H
Methyl ethyl ketone peroxide
CAS#37187-22-7
Liquid mixture
Description
Norox MEKP-9H features a reduced level of hydrogen peroxide.
Norox MEKP-9H is particularly useful in critical gel coat applications. Another
area of application is in heated, continuous mixing systems for polymer
concrete and cultured marble.
Technical Data
Active oxygen 9.0% max
Form: Liquid
Specific Gravity @ 25 C: 1.11
Flash point (C.O.C.): 200 F/93 C, min
Flash point (SETA C.C.) 170 F min.
SADT: 140 F (60 C)
Soluble in: Oxygenated organic solvents
Slightly soluble in: Water
Application
Norox MEKP-9H is an excellent liquid general-purpose cure initiator for the
room temperature cure of polyester resins. In this application it imparts medium
to high exotherm characteristics to the cure. Norox MEKP-9H gives excellent
performance as a curing agent for gel coats. Resin suppliers should be
consulted for specific recommendations for individual resins. Norox MEKP-9H
is highly refined and substantially free of water, hydrogen peroxide and methyl
ethyl ketone. Compared to Norox MEKP-9, with most polyester resins Norox
MEKP-9H gives a slightly longer gel time with a similar total cure time.
Technical Data Sheet
PACKAGING, SHIPPING & AVAILABILITY
The standard package sizes of Norox MEKP-9H are cases of 4×8 lb.
/ 4×3.6 kg polyethylene bottles; and 44 lb. /20 kg hedpacks. For
custom package sizes, please contact your local distributor or United
Initiators, Inc.
Classification Please refer to the specific Norox MEKP-9H Safety
Data Sheet under section 14, Shipping Description.
Norox MEKP-9H is available through a nation-wide distributor
network. Call United Initiators Inc. for the name of the distributor in
your area.
This information and our application-technical advice whether verbal, in writing or by way of trials reflect our present state of knowledge based on internal tests with local raw
materials. Their purpose is to inform interested parties about our products and their possible application. They should not be construed as guaranteeing specific product properties or
their suitability for a particular application. Furthermore, the information does not contain complete instructions for use. Nor does it constitute a guarantee as to quality and durability.
Changes due to technical progress and corporate advancement reserved. Any existing third-party copyrights are to be taken into account.
Application and use of our products based on our application-specific advice is beyond our control and sole responsibility of the user. The user is not released from the obligation of
verifying the suitability and applicability as to the intended purpose.
T: +49 89 74422 237
F: +49 89 74422 6237
cs-initiators.eu@united-in.com
T: +1 800 231 2702
F. +1 440 323 0898
cs-initiators.nafta@united-in.com
T: +86 20 6131 1370
F: +86 139 2503 8952
cs-initiators.cn@united-in.com
T: +61 2 9316 0046
F: +61 2 9316 0034
cs-initiators.au@united-in.com
www.united-initiators.com
Revision number: 1.0. Date: 03.03.14. Device M: TDS.
by | Sep 27, 2025
by | Sep 27, 2025
Technical Data Sheet
NOROX
MEKP-925H
Methyl ethyl ketone peroxide
CAS#1338-23-4
Liquid mixture
Description
Norox MEKP-925H is specifically formulated to reduce gas generation in
critical corrosion applications for vinyl ester resins in gel coats, barrier
coatings, and corrosion resistant structures. The low hydrogen peroxide level
in Norox MEKP-925H often requires that the resin promotion system be
modified for some resins to obtain reasonable gel times.
Technical Data
Active Oxygen: 9.0% max.
Form: Liquid
Color: Water White
Specific Gravity @ 25 C: 1.10
Flash point (C.O.C.): 200 F, min.
Flash point (SETA C.C.): 170 F, min.
Soluble in: Oxygenated organic solvents
Slightly soluble in: Water
SADT <140 F (60 C)
Storage temp: <80 F(27 C)
Max Transport Temp: <80 F(27 C)
Application
Norox MEKP-925H is a methyl ethyl ketone peroxide composition
formulated to be an excellent cure initiator for both unsaturated
polyester resins and vinyl ester resins. With most unsaturated
polyesters it gives longer gel and gel to cure times but with a higher
peak exotherm than Norox MEKP-9, particularly in thick sections.
With most vinyl esters Norox MEKP-925H gives the most complete
cure of any currently available MEK peroxide.
Technical Data Sheet
PACKAGING, SHIPPING & AVAILABILITY
The standard package sizes of Norox MEKP-925H are cases of 4x8
lb. polyethylene bottles; and 40 lb. or 20 kg Hedpacks. For custom
package sizes, please contact your local distributor or United
Initiators, Inc.
Classification Please refer to the specific Norox MEKP-925H
Safety Data Sheet under section 14, Shipping Description.
Norox MEKP-925H is available through a nation-wide distributor
network. Call United Initiators, Inc. for the name of the distributor in
your area.
This information and our application-technical advice whether verbal, in writing or by way of trials reflect our present state of knowledge based on internal tests with local raw
materials. Their purpose is to inform interested parties about our products and their possible application. They should not be construed as guaranteeing specific product properties or
their suitability for a particular application. Furthermore, the information does not contain complete instructions for use. Nor does it constitute a guarantee as to quality and durability.
Changes due to technical progress and corporate advancement reserved. Any existing third-party copyrights are to be taken into account.
Application and use of our products based on our application-specific advice is beyond our control and sole responsibility of the user. The user is not released from the obligation of
verifying the suitability and applicability as to the intended purpose.
T: +49 89 74422 237
F: +49 89 74422 6237
cs-initiators.eu@united-in.com
T: +1 800 231 2702
F. +1 440 323 0898
cs-initiators.nafta@united-in.com
T: +86 20 6131 1370
F: +86 139 2503 8952
cs-initiators.cn@united-in.com
T: +61 2 9316 0046
F: +61 2 9316 0034
cs-initiators.au@united-in.com
www.united-initiators.com
Revision number: 1.0. Date: 03.03.14. Device M: TDS.
by | Sep 27, 2025
Technical Data Sheet
NOROX
MCP
Methyl ethyl ketone peroxide; Cumenehydroperoxide
CAS#1338-23-4; 80-15-9
Liquid mixture
Description
NOROX
MCP is a solution of Methyl ethyl ketone peroxides and Cumyl
hydroperoxide in phlegmatiser.
NOROX
MCP is a liquid polymerisation initiator for the room temperature cure
of unsaturated polyester and vinyl ester resins with the following
advantages/properties:
Very low peak exotherm temperature
Longer working time (gel time) then standard MEKP
Excellent final cure both in thin and thick laminates
Low impurity levels (water, MEK, salts)
Less shrinkage and stress problems
Technical Data
Appearance Pale yellow liquid
Active oxygen 8.7 9.0 %
Density at 20 C 1.08 1.11 g/cm
3
Viscosity at 20 C 8 – 14 mPa.s
Flash point (Seta closed cup) > 65 C
Critical temperature (SADT) 60 C
Soluble in Oxygenated organic solvents
Slightly soluble in Water
Recommended storage temperature Max 30 C.
Maintenance of activity at 30 C
as from date of delivery
6 months
Application
NOROX
MCP has a flat and low exotherm curve which ends up in a good 24h
cure. This curing behaviour reduces stress, cracking and shrinkage problems
in laminates & castings. Less shrinkage also means less fibre print through of
gelcoated surfaces. The gel time and cure time is slower compared to
standard MEKP products but final cured resin hardness is often better than for
resins initiated with standard MEKP. NOROX
MCP can be used when you
want to build up thick laminates in one step, or if the laminate has big
variations in thickness, or when you have high resin loadings. Typical
applications are vacuum bag moulding of big units, filament winding of pipes &
tanks with thicker laminates or polyester concrete systems with high resin-to-
filler ratio.
Technical Data Sheet
Measurements
A reactivity test with an unsaturated polyester resin gave the
following results:
Resin: Orthophthalic polyester Temperature: 21 C
Initiator %:1.0 Accelerator % 1% (1% cobalt)
Initiator Gel
time
min
Time to
peak
min
Peak
exotherm temp
C
NOROX
MCP 37 79 28
NOROX
MCP-75 22 69 31
NOROX
KP-9 11 48 47
Reactivity of NOROX
initiators:
A reactivity test with an epoxy vinyl ester gave the following results:
Resin: Pre-accelerated epoxy vinyl ester Temperatu re: 25 C
Initiator %: 1.5
Initiator Gel time
min
Time to
Peak
min
Peak
Exotherm
temp C
Barcol
Hardness
(935) 24h
Gassing
ml
NOROX
KP-9
24 62 113
60
7.0
NOROX
KP-925H
18 39 128 53 0.9
NOROX
MCP
43 >233 28 60 0.5
0
5
10
15
20
25
30
35
40
45
50
0 4 8 12 16 20 24 28 32 36 40 44 48 52 56 60 64 68 72 76 80 84 88 92 96Temperature ( C)
Time (minutes)
MCP MCP-75 KP-9
Technical Data Sheet
Standard Packaging
The standard package sizes of NOROX
MCP are 5 kg and 25 kg
polyethylene bottles.
Disclaimer
This information and all further technical advice are reflecting our present knowledge and experience based on internal tests with local raw materials with the purpose to inform about
our products and applications. The information should not be construed as guaranteeing specific properties of products described or their suitability for a particular application, nor as
providing complete instructions for use. The information implies no guarantee for product and shelf life properties, nor any liability or other legal responsibility on our part, including
with regard to existing third party intellectual property rights, especially patent rights. We reserve the right to make any changes according to technological progress or further
developments.
Application and usage of our products based on our technical advice is out of our control and sole responsibility of the user. The user is not released from the obligation to conduct
careful inspection and testing of incoming goods in order to verify the suitability for the intended application.
United Initiators
EU
United Initiators
Nafta
United Initiators
China
United Initiators
Australia
T: +49 89 74422 237
F: +49 89 74422 6237
cs-initiators.eu@united-in.com
T: +1 800 231 2702
F. +1 440 323 0898
cs-initiators.nafta@united-in.com
T: +86 20 6131 1370
F: +86 139 2503 8952
cs-initiators.cn@united-in.com
T: +61 2 9316 0046
F: +61 2 9316 0034
cs-initiators.au@united-in.com
www.united-initiators.com
Revision number: 1.0. Date: 03.03.14. Device M: TDS.
by | Sep 27, 2025
Technical Data Sheet
NOROX
MCP-75
Methyl ethyl ketone peroxide; Cumylhydroperoxide
CAS#1338-23-4; 80-15-9
Liquid mixture
Description
NOROX
MCP-75 is a solution of Methyl ethyl ketone peroxides and
Cumyl hydroperoxide in phlegmatizer. NOROX
MCP-75 is a liquid
polymerization initiator for the room temperature cure of unsaturated
polyester and vinyl ester resins with the following
advantages/properties:
Very low peak exotherm temperature
Slower gel time than standard MEKP
Excellent final cure both in thin and thick laminates
Low impurity levels (water, MEK, salts)
Less shrinkage and stress problems
Technical Data
Appearance Pale yellow liquid
Active oxygen 8.7 9.0%
Density at 20 C 1.09 1.13 g/cm
3
Flash point (Seta closed cup) > 65 C (149 F)
Critical temperature (SADT) 60 C (140 F)
Soluble in Oxygenated organic solvents
Slightly soluble in Water
Recommended storage temperature Max 30 C.
Maintenance of activity at 30 C
as from date of delivery
6 months
Application
NOROX
MCP-75 has a flat and low exotherm curve which ends up in a good
24 hour cure. This curing behavior reduces stress, cracking and shrinkage
problems in laminates & castings. Less shrinkage also means less fibre print
through of gelcoated surfaces. The gel time and cure time is slower compared
to standard MEKP products. NOROX
MCP-75 can be used when you want to
build up thick laminates in one step, or if the laminate has big variations in
thickness, or when you have high resin loadings.Typical applications are
vacuum bag moulding of big units, filament winding of pipes and tanks with
thicker laminates or polyester concrete systems with high resin-to-filler ratio.
Technical Data Sheet
Measurements
A reactivity test with an unsaturated polyester resin gave the following
results:
Resin: Orthophthalic polyester Temperature: 21 C
Initiator %:1.0 Accelerator % 1% (1% cobalt)
Initiator Gel
time
min
Time to
peak
Min
Peak
exotherm temp
C
NOROX
MCP-75 22 69 31
NOROX
KP-9 11 48 47
NOROX
MEKP-925 15 59 43
Reactivity of NOROX
Initiators:
Standard Packaging
The standard package sizes of NOROX
MCP-75 are 5 kg (8 lb) and 25
kg (40 lb) polyethylene bottles.
Disclaimer
This information and all further technical advice are reflecting our present knowledge and experience based on internal tests with local raw materials with the purpose to inform about
our products and applications. The information should not be construed as guaranteeing specific properties of products described or their suitability for a particular application, nor as
providing complete instructions for use. The information implies no guarantee for product and shelf life properties, nor any liability or other legal responsibility on our part, including
with regard to existing third party intellectual property rights, especially patent rights. We reserve the right to make any changes according to technological progress or further
developments.
Application and usage of our products based on our technical advice is out of our control and sole responsibility of the user. The user is not released from the obligation to conduct
careful inspection and testing of incoming goods in order to verify the suitability for the intended application.
United Initiators
EU
United Initiators
Nafta
United Initiators
China
United Initiators
Australia
T: +49 89 74422 237
F: +49 89 74422 6237
cs-initiators.eu@united-in.com
T: +1 800 231 2702
F. +1 440 323 0898
cs-initiators.nafta@united-in.com
T: +86 20 6131 1370
F: +86 139 2503 8952
cs-initiators.cn@united-in.com
T: +61 2 9316 0046
F: +61 2 9316 0034
cs-initiators.au@united-in.com
www.united-initiators.com
Revision number: 1.0. Date: 03.03.14. Device M: TDS.
0
5
10
15
20
25
30
35
40
45
50
0 4 8 121620242832364044485256606468727680848892Temperature ( C)
Time (minutes)
MCP-75 MEKP-925 KP-9
by | Sep 27, 2025
Technical Data Sheet
NOROX
MCP-75
Methyl ethyl ketone peroxide; Cumylhydroperoxide
CAS#1338-23-4; 80-15-9
Liquid mixture
Description
NOROX
MCP-75 is a solution of Methyl ethyl ketone peroxides and
Cumyl hydroperoxide in phlegmatizer. NOROX
MCP-75 is a liquid
polymerization initiator for the room temperature cure of unsaturated
polyester and vinyl ester resins with the following
advantages/properties:
Very low peak exotherm temperature
Slower gel time than standard MEKP
Excellent final cure both in thin and thick laminates
Low impurity levels (water, MEK, salts)
Less shrinkage and stress problems
Technical Data
Appearance Pale yellow liquid
Active oxygen 8.7 9.0%
Density at 20 C 1.09 1.13 g/cm
3
Flash point (Seta closed cup) > 65 C (149 F)
Critical temperature (SADT) 60 C (140 F)
Soluble in Oxygenated organic solvents
Slightly soluble in Water
Recommended storage temperature Max 30 C.
Maintenance of activity at 30 C
as from date of delivery
6 months
Application
NOROX
MCP-75 has a flat and low exotherm curve which ends up in a good
24 hour cure. This curing behavior reduces stress, cracking and shrinkage
problems in laminates & castings. Less shrinkage also means less fibre print
through of gelcoated surfaces. The gel time and cure time is slower compared
to standard MEKP products. NOROX
MCP-75 can be used when you want to
build up thick laminates in one step, or if the laminate has big variations in
thickness, or when you have high resin loadings.Typical applications are
vacuum bag moulding of big units, filament winding of pipes and tanks with
thicker laminates or polyester concrete systems with high resin-to-filler ratio.
Technical Data Sheet
Measurements
A reactivity test with an unsaturated polyester resin gave the following
results:
Resin: Orthophthalic polyester Temperature: 21 C
Initiator %:1.0 Accelerator % 1% (1% cobalt)
Initiator Gel
time
min
Time to
peak
Min
Peak
exotherm temp
C
NOROX
MCP-75 22 69 31
NOROX
KP-9 11 48 47
NOROX
MEKP-925 15 59 43
Reactivity of NOROX
Initiators:
Standard Packaging
The standard package sizes of NOROX
MCP-75 are 5 kg (8 lb) and 25
kg (40 lb) polyethylene bottles.
Disclaimer
This information and all further technical advice are reflecting our present knowledge and experience based on internal tests with local raw materials with the purpose to inform about
our products and applications. The information should not be construed as guaranteeing specific properties of products described or their suitability for a particular application, nor as
providing complete instructions for use. The information implies no guarantee for product and shelf life properties, nor any liability or other legal responsibility on our part, including
with regard to existing third party intellectual property rights, especially patent rights. We reserve the right to make any changes according to technological progress or further
developments.
Application and usage of our products based on our technical advice is out of our control and sole responsibility of the user. The user is not released from the obligation to conduct
careful inspection and testing of incoming goods in order to verify the suitability for the intended application.
United Initiators
EU
United Initiators
Nafta
United Initiators
China
United Initiators
Australia
T: +49 89 74422 237
F: +49 89 74422 6237
cs-initiators.eu@united-in.com
T: +1 800 231 2702
F. +1 440 323 0898
cs-initiators.nafta@united-in.com
T: +86 20 6131 1370
F: +86 139 2503 8952
cs-initiators.cn@united-in.com
T: +61 2 9316 0046
F: +61 2 9316 0034
cs-initiators.au@united-in.com
www.united-initiators.com
Revision number: 1.0. Date: 03.03.14. Device M: TDS.
0
5
10
15
20
25
30
35
40
45
50
0 4 8 121620242832364044485256606468727680848892Temperature ( C)
Time (minutes)
MCP-75 MEKP-925 KP-9
by | Sep 27, 2025
by | Sep 27, 2025
