by | Sep 27, 2025
TC-1630 A/B Page 1 of 2 Date: 05/20/2023
For more information call BJB Enterprises, Inc. (714) 734-8450 Fax (714) 734-8929
www.bjbenterprises.com
RIGID FILLED POLYURETHANES
By BJB Enterprises. Inc.
An ISO-9001 Certified company
TC-1630 A/B
ULTRACAST II
TC-1630 is very hard, tough, fast setting filled 2-part polyurethane casting resin system which is ideal for: Foam Latex Molds,
Vacuum Forming Tools, Silicone Prosthetic Molds, Industrial Molds, Rigid Parts, Composite Tools, and much more! TC-1630 is
unique because it exhibits very low shrinkage when cast in mass, yet still cures quickly for producing molds and parts in a
production setting. Its unique formulation also allows it to be cast into alginate life-cast molds without reaction to the presence of
moisture.
Economical Excellent Detail Reproduction
Low Shrinkage / Low Exotherm Low Moisture Sensitivity
Fast Cure Time Works Well with BJB Platinum and Tin Silicones*
PHYSICAL PROPERTIES TEST METHOD TEST RESULTS
Hardness, Shore D ASTM D2240 80 2
Density (g/cc) ASTM D792 1.80
Cubic Inches per Pound N/A 16.5
Color/Appearance Visual Gray/Opaque
Flexural Strength (psi) ASTM D790 6,221
Compressive Strength (psi) ASTM D695 8,400
Shrinkage (in/in) linear ASTM D2566 @ 1 depth 0.002
Heat Deflection Temperature @ 66psi ASTM D648-04 211 F (99.4 C)
Heat Deflection Temperature @ 264psi ASTM D648-04 190 F (87.8 C)
HANDLING PROPERTIES Part A Part B
Mix Ratio (by weight) 100 100
Mix Ratio (by volume) 93 100
Specific Gravity 1.73 1.60
Color Black White
Viscosity (cps) @ 77 F (25 C) Brookfield 900 1,300
Mixed Viscosity (cps) @ 77 F (25 C) Brookfield 1,100
Work Time, 100g mass @ 77 F (25 C) 5 6 minutes
Gel Time 7 8 minutes
Demold Time @ 77 F (25 C) 1 hour
Properties above are typical and not for specifications.
TC-1630 A/B Page 2 of 2 Date: 05/20/2023
For more information call BJB Enterprises, Inc. (714) 734-8450 Fax (714) 734-8929
NON-WARRANTY “Except for a warranty that materials substantially comply with the data presented in Manufacturer’s latest bulletin describing the product (the basis for this substantial
compliance is to be determined by the standard quality control tests generally performed by Manufacturer), all materials are sold “AS IS” and without any warranty express or implied as to
merchantability, fitness for a particular purpose, patent, trademark or copyright infringement, or as to any other matter. In no event shall Manufacturer’s liability for damages exceed Manufacturer’s
sale price of the particular quantity with respect to which damages are claimed.”
*NOTE:
BJB has tested our Platinum and Tin Silicones with great results but due to the temperamental nature of some Platinum Silicone
materials, a small test is recommended when trying unknown systems. Be sure molds are sufficiently cured and wash new molds
with warm soap and water for best results. Contact BJB s technical staff if processing advice or cured samples are needed.
MIXING AND CASTING NOTES:
TC-1630 A/B is a filled system and will settle in storage. Thoroughly pre-mix A and B separately (preferably with a Jiffy Mixer)
before measuring out equal parts of A and B by weight. Thoroughly mix with a flat, wide mixing spatula or drill mix with a Jiffy
Mixer, being sure material on the sides and bottom are well mixed. After each use, remaining material in the cans should be
purged with dry nitrogen and tightly sealed before storage to help preserve shelf life.
TC-1630 A/B can typically be demolded and handled an hour or two after casting. It may also be cast very thick (8-10 or more)
without creating excessive exotherm, though thicker sections (e.g. over 4 inches) can generate increased shrinkage. To avoid this
problem, casting around a displacement core or stage pouring is recommended.
ACCESSORIES:
BJB offers silicone RTV mold making materials along with a wide range of accessory items. These include de-airing agents,
pigments, mold releases, and Jiffy
Mixers. Visit BJB s website at www.bjbenterprises.com or consult a BJB representative for
more information.
STORAGE:
Store at ambient temperatures, 65-80 F (18-27 C). Unopened containers will have a shelf life of 3 months from date of shipment
when properly stored at recommended temperatures. Purge opened containers with dry nitrogen before re-sealing.
PACKAGING Part A Part B Cubic Inches per Kit
Gallon Kits 10 lbs. 10 lbs. 330
SAFETY PRECAUTIONS:
Use in a well-ventilated area. Avoid contact with skin using protective gloves and protective clothing. Repeated or
prolonged contact on the skin may cause an allergic reaction.
Eye protection is extremely important. Always use approved safety glasses or goggles when handling this product.
IF CONTACT OCCURS:
Skin: Immediately wash with soap and water. Remove contaminated clothing and launder before reuse. It is not
recommended to remove resin from skin with solvents. Solvents only increase contact and dry skin. Seek
qualified medical attention if allergic reactions occur.
Eyes: Immediately flush with water for at least 15 minutes. Call a physician.
Ingestion: If swallowed, call a physician immediately. Remove stomach contents by gastric suction or induce vomiting only as
directed by medical personnel. Never give anything by mouth to an unconscious person.
Refer to the Material Safety Data Sheet before using this product.
WARNING: This product can expose you to chemicals including Naphthalene, which are known to the State of California
to cause cancer. For more information, go to www.P65Warnings.ca.gov.
Handling Guide
by | Sep 27, 2025
Product Information
Units Test Method Results
Shore D ASTM D-2240 70
psi ASTM D-412 6,800
psi ASTM D-412 375,000
% ASTM D-412 5
pli ASTM D-624 180
– Visual Natural/Pigmented
Units Component A Component B
(A/B) 50 50
(A/B) 52 48
g/mL 1.16 – 1.18 1.06 – 1.08
cPs 400 – 600 900 – 1300
Visual Pale Yellow Opaque/White
Seconds
Seconds
Hours
Storage and Shelf Life
Packaging
Component A: 490 lbNet Weight
Component B: 435 lbNet Weight
Physical Properties (Final Product)
SPL-H 4072
TECHNICAL DATA SHEET
Polyurethane Polyurea Spray Elastomer System
SPL-H 4072 is a 100% solids high-performance, multi-purpose polyurethane coating designed for processing
through plural component, high-pressure dispensing equipment. Once fully cured, this material is tough and
hard with excellent tensile strength with moderate impact resistance. SPL-H 4072 was designed to be
sprayed over EPS and Urethane Board stock. SPL-H 4072 is also an excellent product to replace Polyester
Resins and Fiberglass.
Mix Ratio by Weight
Specific Gravity @ 75 F
Viscocity @ 75 F
Shore Hardness
Tensile Strength
Flexural Modulus
Elongation
Tear Strength
55 gallon steel drum (open top)
For more information contact Eteco, Inc. (714) 480-1370 | info@etecoinc.com
www.etecoinc.com
Non-Warranty: This information is furnished without warranty, expressed or implied, except that is accurate to the best knowledge of Eteco, Inc. The data on
these sheets relates only to the specific material designated herein. Eteco, Inc. assumes no legal responsibility for use or reliance upon this data. The user
should conduct sufficient investigation to establish the suitability of any product for its intended use.
Color
*Final properties will be reached in a course of several days. Properties are typical and not for specifications*
Components should be kept well sealed in a dry place from 70 to 90 F. Shelf life of unopened containers is
six (6) months from manufacturing date. Mix Component B well prior to each use. Purge opened containers
with dry nitrogen before resealing. Refer to product SDS for more information.
55 gallon steel drum (closed top)
Tack Free Time 100 – 120
90% Cure Time* 24
Color
Gel Time @ 75 F 80 – 90
Handling Characteristics
Mix Ratio by Volume
by | Sep 27, 2025
Product Information
Units Test Method Results
Shore D ASTM D-2240 70
psi ASTM D-412 6,800
psi ASTM D-412 375,000
% ASTM D-412 5
pli ASTM D-624 180
– Visual Natural/Pigmented
Units Component A Component B
(A/B) 50 50
(A/B) 52 48
g/mL 1.16 – 1.18 1.06 – 1.08
cPs 400 – 600 900 – 1300
Visual Pale Yellow Opaque/White
Seconds
Seconds
Hours
Storage and Shelf Life
Packaging
Component A: 490 lbNet Weight
Component B: 435 lbNet Weight
Physical Properties (Final Product)
SPL-H 4072
TECHNICAL DATA SHEET
Polyurethane Polyurea Spray Elastomer System
SPL-H 4072 is a 100% solids high-performance, multi-purpose polyurethane coating designed for processing
through plural component, high-pressure dispensing equipment. Once fully cured, this material is tough and
hard with excellent tensile strength with moderate impact resistance. SPL-H 4072 was designed to be
sprayed over EPS and Urethane Board stock. SPL-H 4072 is also an excellent product to replace Polyester
Resins and Fiberglass.
Mix Ratio by Weight
Specific Gravity @ 75 F
Viscocity @ 75 F
Shore Hardness
Tensile Strength
Flexural Modulus
Elongation
Tear Strength
55 gallon steel drum (open top)
For more information contact Eteco, Inc. (714) 480-1370 | info@etecoinc.com
www.etecoinc.com
Non-Warranty: This information is furnished without warranty, expressed or implied, except that is accurate to the best knowledge of Eteco, Inc. The data on
these sheets relates only to the specific material designated herein. Eteco, Inc. assumes no legal responsibility for use or reliance upon this data. The user
should conduct sufficient investigation to establish the suitability of any product for its intended use.
Color
*Final properties will be reached in a course of several days. Properties are typical and not for specifications*
Components should be kept well sealed in a dry place from 70 to 90 F. Shelf life of unopened containers is
six (6) months from manufacturing date. Mix Component B well prior to each use. Purge opened containers
with dry nitrogen before resealing. Refer to product SDS for more information.
55 gallon steel drum (closed top)
Tack Free Time 100 – 120
90% Cure Time* 24
Color
Gel Time @ 75 F 80 – 90
Handling Characteristics
Mix Ratio by Volume
by | Sep 27, 2025
Product Information
Units Test Method Results
Shore D ASTM D-2240 65 +/- 3
psi ASTM D-412 5,200
psi ASTM D-412 –
% ASTM D-412 70
pli ASTM D-624 180
– Visual Natural/Pigmented
Units Component A Component B
(A/B) 50 50
(A/B) 52 48
g/mL 1.17 – 1.19 1.07 – 1.09
cPs 500 – 700 900 – 1300
Visual Pale Yellow Opaque/White
Seconds
Seconds
Hours
Storage and Shelf Life
Packaging
Component A: 490 lbNet Weight
Component B: 435 lbNet Weight
Physical Properties (Final Product)
SPL-H 4060
TECHNICAL DATA SHEET
Polyurethane Polyurea Spray Elastomer System
SPL-H 4060 is a high-performance, multi-purpose, polyurethane coating designed for processing
through plural component, high-pressure dispensing equipment. Once fully cured, this material is
tough, flexible, and has high impact and tear resistance. SPL-H 4060 exhibits good weather
resistance and gloss retention. Contact an Eteco, Inc. representative for specific material compatibility,
immersion service suitability and substrate preparation.
Mix Ratio by Weight
Specific Gravity @ 75 F
Viscocity @ 75 F
Shore Hardness
Tensile Strength
Tensile Modulus
Elongation
Tear Strength
55 gallon steel drum (open top)
For more information contact Eteco, Inc. (714) 480-1370 | info@etecoinc.com
www.etecoinc.com
Non-Warranty: This information is furnished without warranty, expressed or implied, except that is accurate to the best knowledge of Eteco, Inc.
The data on thes e s heets rel ates onl y to the s pec i fi c materi al des i gnated herei n. Etec o, Inc . as s umes no l egal res pons i bi l i ty for us e or rel i anc e
upon this data. The user should conduct sufficient investigation to establish the suitability of any product for its intended use.
Color
*Final properties will be reached in a course of several days. Properties are typical and not for specifications*
Components should be kept well sealed in a dry place from 70 to 90 F. Shelf life of unopened
containers is six (6) months from manufacturing date. Mix Component B well prior to each use. Purge
opened containers with dry nitrogen before resealing. Refer to product SDS for more information.
55 gallon steel drum (closed top)
Tack Free Time 25
90% Cure Time* 24
Color
Gel Time @ 130 F to 150 F 10 – 15
Handling Characteristics
Mix Ratio by Volume
by | Sep 27, 2025
SP-205 A/B Page 1 of 2 Date: 10/10/2020
For more information call BJB Enterprises, Inc. (714) 734-8450 Fax (714) 734-8929
www.bjbenterprises.com
SP-205 A/B
80 SHORE D SPRAY APPLIED POLYURETHANE
SP-205 A/B is a two component rigid polyurethane material designed to provide high strength, high impact, and good heat resistance
for the fabrication of structural parts, composite type structures, and for coatings that serve many purposes.
SP-205 A/B can be sprayed with conventional plural component high pressure spray equipment or with BJB s CPE-25 and CPE-40
pneumatic hand held spray guns.
Used for rapid production of parts, composite structures, and molds
Provides excellent surface finishes built on polyurethane rigid foam and styrofoam
Superior adhesion to a wide variety of substrates, most notably rigid foams and wood
Excellent impact resistance coupled with high flexural strength
Provides very fine detail reproduction
Convenient 1:1 by volume mix ratio
Movie Special Effects Props Prototype Models Theming
Art Industry Automotive Industry Architectural Industry
PHYSICAL PROPERTIES TEST METHOD
ELEVATED TEMPERATURE
CURE*
Hardness, Shore D ASTM D2240-04e1 80 5
Density (g/cc) ASTM D792-00 1.175
Cubic Inches per Pound N/A 24.78
Color/Appearance Visual Gray / Opaque
Tensile Strength (psi) ASTM D638-03 5,900
Tensile Modulus (psi) ASTM D638-03 234,000
Elongation (%) ASTM D638-03 22
Flexural Strength (psi) ASTM D790-03 8,400
Flexural Modulus (psi) ASTM D790-03 220,000
Shrinkage (in/in) linear 12 x1/2 x1/2 0.0082
Izod Impact (ft-lb/in) notched ASTM D256-05 0.77
Heat Deflection Temperature (66 psi) ASTM D648-04 190 F (87.8 C)
Heat Deflection Temperature (264 psi) ASTM D648-04 148 F (64.4 C)
*Note: Reported physical properties are based on test specimens cured 1-3 hours at room temperature then 16 hours at 180 F (82 C).
HANDLING PROPERTIES Part A Part B
Mix Ratio by weight 100 90
Mix Ratio by volume 100 100
Specific Gravity @ 77 F (25 C) 1.18 1.052
Color Yellow Gray
Viscosity (cps) @ 77 F (25 C) Brookfield 325 1,000
Mixed Viscosity (cps) @ 77 F (25 C) Brookfield 650
Gel Time 30 35 seconds
Demold Time @ 77 F (25 C) 30 45 minutes
Properties above are typical and not for specifications.
CURE SCHEDULE:
SPRAYABLE POLYURETHANES
Dedicated to QUALITY, SERVICE, SAFETY, and INNOVATION
An ISO-9001 Certified company
SP-205 A/B Page 2 of 2 Date: 10/10/2020
For more information call BJB Enterprises, Inc. (714) 734-8450 Fax (714) 734-8929
NON-WARRANTY “Except for a warranty that materials substantially comply with the data presented in Manufacturer’s latest bulletin describing the product (the basis for this substantial
compliance is to be determined by the standard quality control tests generally performed by Manufacturer), all materials are sold “AS IS” and without any warranty express or implied as
to merchantability, fitness for a particular purpose, patent, trademark or copyright infringement, or as to any other matter. In no event shall Manufacturer’s liability for damages exceed
Manufacturer’s sale price of the particular quantity with respect to which damages are claimed.”
Most of the physical properties can be achieved in 5-7 days at 77 F (25 C). You may use your own post-cure schedule but the
physical properties may vary from BJB s cure schedule of 1-3 hours at 77 F (25 C) followed by 16 hours at 180 F (82 C). Do not
exceed curing temperatures of 200 F (93 C). Support of the part may be required to prevent part deformation during the heat curing
process.
STORAGE:
Store at ambient temperatures, 65-80 F (18-27 C). Unopened containers will have a shelf life of 6 months from date of shipment when
properly stored at recommended temperatures. Purge opened containers with dry nitrogen before re-sealing.
PACKAGING Part A Part B
Cubic Inches
per Kit
Gallon Kits 8 lbs. 7.2 lbs. 377
5-Gallon Kits 40 lbs. 36 lbs. 1,883
SAFETY PRECAUTIONS:
Avoid contact with skin using protective gloves and protective clothing. Repeated or prolonged contact on the skin may cause an
allergic reaction. Eye protection is extremely important. Always use approved safety glasses or goggles when handling this
product. Use in well-ventilated areas. Avoid breathing vapors. If exposures cannot be kept at a minimum, a respirator may be
necessary in addition to ventilation. The use of a positive pressure air supplied respirator is mandatory when airborne isocyanate
concentrations are not known or exceeds OSHA S TWA of 0.005 ppm. Air purifying, organic cartridge type respirators are not
generally recommended to use when handling this material without implementation of an end of life service program. Observe
OSHA regulations for respirator use (29 CFR 1910.134). Employers are responsible for selecting the correct respirator for each
situation.
IF CONTACT OCCURS:
Skin: Immediately wash with soap and water. Remove contaminated clothing and launder before reuse. It is not recommended to
remove resin from skin with solvents. Solvents only increase contact and dry skin. Seek qualified medical attention if
allergic reactions occur.
Eyes: Immediately flush with water for at least 15 minutes. Call a physician.
Ingestion: If swallowed, call a physician immediately. Remove stomach contents by gastric suction or induce vomiting only as
directed by emergency personnel. Never give anything by mouth to an unconscious person.
Refer to the Material Safety Data Sheet before using this product.
WARNING: This product can expose you to chemicals including 1,2-Benzenedicarboxylic acid, di-C9-11-branched alkyl
esters, C10-rich and Titanium Dioxide (TiO2) which are known to the State of California to cause cancer and birth defects or other
reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Handling Guide
by | Sep 27, 2025
by | Sep 27, 2025
by | Sep 27, 2025
SP-205 A/B Page 1 of 2 Date: 10/10/2020
For more information call BJB Enterprises, Inc. (714) 734-8450 Fax (714) 734-8929
www.bjbenterprises.com
SP-205 A/B
80 SHORE D SPRAY APPLIED POLYURETHANE
SP-205 A/B is a two component rigid polyurethane material designed to provide high strength, high impact, and good heat resistance
for the fabrication of structural parts, composite type structures, and for coatings that serve many purposes.
SP-205 A/B can be sprayed with conventional plural component high pressure spray equipment or with BJB s CPE-25 and CPE-40
pneumatic hand held spray guns.
Used for rapid production of parts, composite structures, and molds
Provides excellent surface finishes built on polyurethane rigid foam and styrofoam
Superior adhesion to a wide variety of substrates, most notably rigid foams and wood
Excellent impact resistance coupled with high flexural strength
Provides very fine detail reproduction
Convenient 1:1 by volume mix ratio
Movie Special Effects Props Prototype Models Theming
Art Industry Automotive Industry Architectural Industry
PHYSICAL PROPERTIES TEST METHOD
ELEVATED TEMPERATURE
CURE*
Hardness, Shore D ASTM D2240-04e1 80 5
Density (g/cc) ASTM D792-00 1.175
Cubic Inches per Pound N/A 24.78
Color/Appearance Visual Gray / Opaque
Tensile Strength (psi) ASTM D638-03 5,900
Tensile Modulus (psi) ASTM D638-03 234,000
Elongation (%) ASTM D638-03 22
Flexural Strength (psi) ASTM D790-03 8,400
Flexural Modulus (psi) ASTM D790-03 220,000
Shrinkage (in/in) linear 12 x1/2 x1/2 0.0082
Izod Impact (ft-lb/in) notched ASTM D256-05 0.77
Heat Deflection Temperature (66 psi) ASTM D648-04 190 F (87.8 C)
Heat Deflection Temperature (264 psi) ASTM D648-04 148 F (64.4 C)
*Note: Reported physical properties are based on test specimens cured 1-3 hours at room temperature then 16 hours at 180 F (82 C).
HANDLING PROPERTIES Part A Part B
Mix Ratio by weight 100 90
Mix Ratio by volume 100 100
Specific Gravity @ 77 F (25 C) 1.18 1.052
Color Yellow Gray
Viscosity (cps) @ 77 F (25 C) Brookfield 325 1,000
Mixed Viscosity (cps) @ 77 F (25 C) Brookfield 650
Gel Time 30 35 seconds
Demold Time @ 77 F (25 C) 30 45 minutes
Properties above are typical and not for specifications.
CURE SCHEDULE:
SPRAYABLE POLYURETHANES
Dedicated to QUALITY, SERVICE, SAFETY, and INNOVATION
An ISO-9001 Certified company
SP-205 A/B Page 2 of 2 Date: 10/10/2020
For more information call BJB Enterprises, Inc. (714) 734-8450 Fax (714) 734-8929
NON-WARRANTY “Except for a warranty that materials substantially comply with the data presented in Manufacturer’s latest bulletin describing the product (the basis for this substantial
compliance is to be determined by the standard quality control tests generally performed by Manufacturer), all materials are sold “AS IS” and without any warranty express or implied as
to merchantability, fitness for a particular purpose, patent, trademark or copyright infringement, or as to any other matter. In no event shall Manufacturer’s liability for damages exceed
Manufacturer’s sale price of the particular quantity with respect to which damages are claimed.”
Most of the physical properties can be achieved in 5-7 days at 77 F (25 C). You may use your own post-cure schedule but the
physical properties may vary from BJB s cure schedule of 1-3 hours at 77 F (25 C) followed by 16 hours at 180 F (82 C). Do not
exceed curing temperatures of 200 F (93 C). Support of the part may be required to prevent part deformation during the heat curing
process.
STORAGE:
Store at ambient temperatures, 65-80 F (18-27 C). Unopened containers will have a shelf life of 6 months from date of shipment when
properly stored at recommended temperatures. Purge opened containers with dry nitrogen before re-sealing.
PACKAGING Part A Part B
Cubic Inches
per Kit
Gallon Kits 8 lbs. 7.2 lbs. 377
5-Gallon Kits 40 lbs. 36 lbs. 1,883
SAFETY PRECAUTIONS:
Avoid contact with skin using protective gloves and protective clothing. Repeated or prolonged contact on the skin may cause an
allergic reaction. Eye protection is extremely important. Always use approved safety glasses or goggles when handling this
product. Use in well-ventilated areas. Avoid breathing vapors. If exposures cannot be kept at a minimum, a respirator may be
necessary in addition to ventilation. The use of a positive pressure air supplied respirator is mandatory when airborne isocyanate
concentrations are not known or exceeds OSHA S TWA of 0.005 ppm. Air purifying, organic cartridge type respirators are not
generally recommended to use when handling this material without implementation of an end of life service program. Observe
OSHA regulations for respirator use (29 CFR 1910.134). Employers are responsible for selecting the correct respirator for each
situation.
IF CONTACT OCCURS:
Skin: Immediately wash with soap and water. Remove contaminated clothing and launder before reuse. It is not recommended to
remove resin from skin with solvents. Solvents only increase contact and dry skin. Seek qualified medical attention if
allergic reactions occur.
Eyes: Immediately flush with water for at least 15 minutes. Call a physician.
Ingestion: If swallowed, call a physician immediately. Remove stomach contents by gastric suction or induce vomiting only as
directed by emergency personnel. Never give anything by mouth to an unconscious person.
Refer to the Material Safety Data Sheet before using this product.
WARNING: This product can expose you to chemicals including 1,2-Benzenedicarboxylic acid, di-C9-11-branched alkyl
esters, C10-rich and Titanium Dioxide (TiO2) which are known to the State of California to cause cancer and birth defects or other
reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Handling Guide
by | Sep 27, 2025
SC-89 THINNER Page 1 of 1 Date: 09/01/2021
For more information call BJB Enterprises, Inc. (714) 734-8450 Fax (714) 734-8929
www.bjbenterprise.com
NON-WARRANTY “Except for a warranty that materials substantially comply with the data presented in Manufacturer’s latest bulletin describing the product (the basis for this substantial
compliance is to be determined by the standard quality control tests generally performed by Manufacturer), all materials are sold “AS IS” and without any warranty express or implied as to
merchantability, fitness for a particular purpose, patent, trademark or copyright infringement, or as to any other matter. In no event shall Manufacturer’s liability for damages exceed
Manufacturer’s sale price of the particular quantity with respect to which damages are claimed.”
PIGMENT, RELEASE & MISCELLANEOUS PRODUCT
Dedicated to QUALITY, SERVICE, SAFETY, and INNOVATION
SC-89 THINNER
FOR REDUCING SC-89 PAINT
SC-89 Thinner has been reformulated to incorporate the use of safer solvents.* This thinner is recommended for use with BJB’s SC-89
series paints. It may also be used as a part cleaner prior to painting.
USAGE:
When thinning the SC-89 paint for spraying, use 2 1/2 – 3 parts thinner to one part paint. This dilution ratio will eliminate the “cob-
webbing” often observed during spraying. When brushing SC-89 paint, generally a one to one dilution is adequate.
STORAGE:
Store at ambient temperatures, 65-80 F (18-27 C). Unopened containers will have a shelf life of 12 months from date of shipment when
properly stored at recommended temperatures. Purge opened containers with dry nitrogen before re-sealing.
PACKAGING
5-Gallon pails 34 lbs.
SAFETY PRECAUTIONS :
Use in a well-ventilated area. Avoid contact with skin using protective gloves and protective clothing. Repeated or prolonged contact on
the skin may cause an allergic reaction. Eye protection is extremely important. Always use approved safety glasses or goggles when
handling this product.
IF CONTACT OCCURS:
Skin: Immediately wash with soap and water. Remove contaminated clothing and launder before reuse. Seek qualified medical
attention if allergic reactions occur.
Eyes: Immediately flush with water for at least 15 minutes. Call a physician.
Ingestion: If swallowed, call a physician immediately. Remove stomach contents by gastric suction or induce vomiting only as directed
by medical personnel. Never give anything by mouth to an unconscious person.
Refer to the Material Safety Data Sheet before using this product.
* SC-89 Thinner now conforms to the EPA’s new Clean Air Act, Section 112 and the voluntary 33-50 program. It contains no hazardous
air pollutants (HAP’s) per 40 CFR part 61; and contains no ozone depleting chemicals (ODC’s) per 40 CFR part 82.
WARNING: This product can expose you to chemicals including methyl isobutyl ketone, which is known to the State of California
to cause cancer. For more information, go to www.P65Warnings.ca.gov.
Handling Guide
An ISO-9001 Certified company
by | Sep 27, 2025
SC-22 Page 1 of 2 Date: 09/08/2020
For more information call BJB Enterprises, Inc. (714) 734-8450 Fax (714) 734-8929
www.bjbenterprises.com
SC-22
POLYURETHANE SOFTENING AGENT
SC-22 is a softening agent that allows the end user to adjust the hardness and elongation properties to their desired
characteristic.
APPLICATION:
SC-22 can be added to any of BJB s Polyurethane Elastomers. We would not recommend the addition of more than 100% of
SC-22 to the total mix of the A & B polyurethane system. Higher levels can significantly reduce the cured physical properties
and cure time of the polyurethane. Increased levels of surface tack may also occur with increasing amounts of SC-22.
PHYSICAL PROPERTIES
F-115 A/B
without SC-22
F-115 A/B
with 25% SC-22
F-115 A/B
with 50% SC-22
F-115 A/B
with 100% SC-22
Hardness, Shore A 15 A 5 A — —
Hardness, Shore 00 65 00 50 00 40 00 15 00
F-125 A/B
without SC-22
F-125 A/B
with 25% SC-22
F-125 A/B
with 50% SC-22
F-125 A/B
with 100% SC-22
Hardness, Shore A 25 A 15 A 5 A —
Hardness, Shore 00 — 65 00 50 00 30 00
Properties above are typical and not for specifications.
HANDLING PROPERTIES
Color Clear
Specific Gravity @ 68 F (20 C) 0.97
Viscosity (cSt) 68 F (20 C) 130
STORAGE:
Store at ambient temperatures, 65-80 F (18-27 C). Unopened containers will have a shelf life of 6 months from date of shipment
when properly stored at recommended temperatures. Purge opened containers with dry nitrogen before re-sealing.
PACKAGING
Quarts 2 lbs.
Gallons 8 lbs.
5-Gallons 40 lbs.
Drums 440 lbs.
PIGMENT, RELEASE, & MISCELLANEOUS PRODUCT
Dedicated to QUALITY, SERVICE, SAFETY, and INNOVATION
An ISO-9001 Certified company
SC-22 Page 2 of 2 Date: 09/08/2020
For more information call BJB Enterprises, Inc. (714) 734-8450 Fax (714) 734-8929
NON-WARRANTY “Except for a warranty that materials substantially comply with the data presented in Manufacturer’s latest bulletin describing the product (the basis for this substantial
compliance is to be determined by the standard quality control tests generally performed by Manufacturer), all materials are sold “AS IS” and without any warranty express or implied as
to merchantability, fitness for a particular purpose, patent, trademark or copyright infringement, or as to any other matter. In no event shall Manufacturer’s liability for damages exceed
Manufacturer’s sale price of the particular quantity with respect to which damages are claimed.”
SAFETY PRECAUTIONS:
Use in a well-ventilated area. Avoid contact with skin using protective gloves and protective clothing. Repeated or prolonged
contact on the skin may cause an allergic reaction. Eye protection is extremely important. Always use approved safety glasses
or goggles when handling this product.
IF CONTACT OCCURS:
Skin: Immediately wash with soap and water. Remove contaminated clothing and launder before reuse. It is not
recommended to remove resin from skin with solvents. Solvents only increase contact and dry skin. Seek qualified
medical attention if allergic reactions occur.
Eyes: Immediately flush with water for at least 15 minutes. Call a physician.
Ingestion: If swallowed, call a physician immediately. Remove stomach contents by gastric suction or induce vomiting only
as directed by medical personnel. Never give anything by mouth to an unconscious person.
Refer to the Material Safety Data Sheet before using this product.
WARNING: This product can expose you to chemicals including 1,2-Benzenedicarboxylic acid, di-C9-11-branched
alkyl esters, C10-rich, which is known to the State of California to cause birth defects or other reproductive harm. For more
information, go to www.P65Warnings.ca.gov.
