by | Sep 27, 2025
SC-22 Page 1 of 2 Date: 09/08/2020
For more information call BJB Enterprises, Inc. (714) 734-8450 Fax (714) 734-8929
www.bjbenterprises.com
SC-22
POLYURETHANE SOFTENING AGENT
SC-22 is a softening agent that allows the end user to adjust the hardness and elongation properties to their desired
characteristic.
APPLICATION:
SC-22 can be added to any of BJB s Polyurethane Elastomers. We would not recommend the addition of more than 100% of
SC-22 to the total mix of the A & B polyurethane system. Higher levels can significantly reduce the cured physical properties
and cure time of the polyurethane. Increased levels of surface tack may also occur with increasing amounts of SC-22.
PHYSICAL PROPERTIES
F-115 A/B
without SC-22
F-115 A/B
with 25% SC-22
F-115 A/B
with 50% SC-22
F-115 A/B
with 100% SC-22
Hardness, Shore A 15 A 5 A — —
Hardness, Shore 00 65 00 50 00 40 00 15 00
F-125 A/B
without SC-22
F-125 A/B
with 25% SC-22
F-125 A/B
with 50% SC-22
F-125 A/B
with 100% SC-22
Hardness, Shore A 25 A 15 A 5 A —
Hardness, Shore 00 — 65 00 50 00 30 00
Properties above are typical and not for specifications.
HANDLING PROPERTIES
Color Clear
Specific Gravity @ 68 F (20 C) 0.97
Viscosity (cSt) 68 F (20 C) 130
STORAGE:
Store at ambient temperatures, 65-80 F (18-27 C). Unopened containers will have a shelf life of 6 months from date of shipment
when properly stored at recommended temperatures. Purge opened containers with dry nitrogen before re-sealing.
PACKAGING
Quarts 2 lbs.
Gallons 8 lbs.
5-Gallons 40 lbs.
Drums 440 lbs.
PIGMENT, RELEASE, & MISCELLANEOUS PRODUCT
Dedicated to QUALITY, SERVICE, SAFETY, and INNOVATION
An ISO-9001 Certified company
SC-22 Page 2 of 2 Date: 09/08/2020
For more information call BJB Enterprises, Inc. (714) 734-8450 Fax (714) 734-8929
NON-WARRANTY “Except for a warranty that materials substantially comply with the data presented in Manufacturer’s latest bulletin describing the product (the basis for this substantial
compliance is to be determined by the standard quality control tests generally performed by Manufacturer), all materials are sold “AS IS” and without any warranty express or implied as
to merchantability, fitness for a particular purpose, patent, trademark or copyright infringement, or as to any other matter. In no event shall Manufacturer’s liability for damages exceed
Manufacturer’s sale price of the particular quantity with respect to which damages are claimed.”
SAFETY PRECAUTIONS:
Use in a well-ventilated area. Avoid contact with skin using protective gloves and protective clothing. Repeated or prolonged
contact on the skin may cause an allergic reaction. Eye protection is extremely important. Always use approved safety glasses
or goggles when handling this product.
IF CONTACT OCCURS:
Skin: Immediately wash with soap and water. Remove contaminated clothing and launder before reuse. It is not
recommended to remove resin from skin with solvents. Solvents only increase contact and dry skin. Seek qualified
medical attention if allergic reactions occur.
Eyes: Immediately flush with water for at least 15 minutes. Call a physician.
Ingestion: If swallowed, call a physician immediately. Remove stomach contents by gastric suction or induce vomiting only
as directed by medical personnel. Never give anything by mouth to an unconscious person.
Refer to the Material Safety Data Sheet before using this product.
WARNING: This product can expose you to chemicals including 1,2-Benzenedicarboxylic acid, di-C9-11-branched
alkyl esters, C10-rich, which is known to the State of California to cause birth defects or other reproductive harm. For more
information, go to www.P65Warnings.ca.gov.
by | Sep 27, 2025
SC-22 Page 1 of 2 Date: 09/08/2020
For more information call BJB Enterprises, Inc. (714) 734-8450 Fax (714) 734-8929
www.bjbenterprises.com
SC-22
POLYURETHANE SOFTENING AGENT
SC-22 is a softening agent that allows the end user to adjust the hardness and elongation properties to their desired
characteristic.
APPLICATION:
SC-22 can be added to any of BJB s Polyurethane Elastomers. We would not recommend the addition of more than 100% of
SC-22 to the total mix of the A & B polyurethane system. Higher levels can significantly reduce the cured physical properties
and cure time of the polyurethane. Increased levels of surface tack may also occur with increasing amounts of SC-22.
PHYSICAL PROPERTIES
F-115 A/B
without SC-22
F-115 A/B
with 25% SC-22
F-115 A/B
with 50% SC-22
F-115 A/B
with 100% SC-22
Hardness, Shore A 15 A 5 A — —
Hardness, Shore 00 65 00 50 00 40 00 15 00
F-125 A/B
without SC-22
F-125 A/B
with 25% SC-22
F-125 A/B
with 50% SC-22
F-125 A/B
with 100% SC-22
Hardness, Shore A 25 A 15 A 5 A —
Hardness, Shore 00 — 65 00 50 00 30 00
Properties above are typical and not for specifications.
HANDLING PROPERTIES
Color Clear
Specific Gravity @ 68 F (20 C) 0.97
Viscosity (cSt) 68 F (20 C) 130
STORAGE:
Store at ambient temperatures, 65-80 F (18-27 C). Unopened containers will have a shelf life of 6 months from date of shipment
when properly stored at recommended temperatures. Purge opened containers with dry nitrogen before re-sealing.
PACKAGING
Quarts 2 lbs.
Gallons 8 lbs.
5-Gallons 40 lbs.
Drums 440 lbs.
PIGMENT, RELEASE, & MISCELLANEOUS PRODUCT
Dedicated to QUALITY, SERVICE, SAFETY, and INNOVATION
An ISO-9001 Certified company
SC-22 Page 2 of 2 Date: 09/08/2020
For more information call BJB Enterprises, Inc. (714) 734-8450 Fax (714) 734-8929
NON-WARRANTY “Except for a warranty that materials substantially comply with the data presented in Manufacturer’s latest bulletin describing the product (the basis for this substantial
compliance is to be determined by the standard quality control tests generally performed by Manufacturer), all materials are sold “AS IS” and without any warranty express or implied as
to merchantability, fitness for a particular purpose, patent, trademark or copyright infringement, or as to any other matter. In no event shall Manufacturer’s liability for damages exceed
Manufacturer’s sale price of the particular quantity with respect to which damages are claimed.”
SAFETY PRECAUTIONS:
Use in a well-ventilated area. Avoid contact with skin using protective gloves and protective clothing. Repeated or prolonged
contact on the skin may cause an allergic reaction. Eye protection is extremely important. Always use approved safety glasses
or goggles when handling this product.
IF CONTACT OCCURS:
Skin: Immediately wash with soap and water. Remove contaminated clothing and launder before reuse. It is not
recommended to remove resin from skin with solvents. Solvents only increase contact and dry skin. Seek qualified
medical attention if allergic reactions occur.
Eyes: Immediately flush with water for at least 15 minutes. Call a physician.
Ingestion: If swallowed, call a physician immediately. Remove stomach contents by gastric suction or induce vomiting only
as directed by medical personnel. Never give anything by mouth to an unconscious person.
Refer to the Material Safety Data Sheet before using this product.
WARNING: This product can expose you to chemicals including 1,2-Benzenedicarboxylic acid, di-C9-11-branched
alkyl esters, C10-rich, which is known to the State of California to cause birth defects or other reproductive harm. For more
information, go to www.P65Warnings.ca.gov.
by | Sep 27, 2025
Product Information
Units Test Method Results
pcf ASTM D-1622-03 4.5 – 5.5
psi ASTM D-1620 85
psi ASTM D-1623 110
BTU-in/hr-ft
2
– FASTM C-177 0.18 – 0.20
% ASTM D-1940 > 93%
Units Component A Component B
(A/B) 50 50
(A/B) 52 48
g/mL 1.22 – 1.24 1.04 – 1.07
cPs 180 – 220 600 – 800
– Amber Beige
Seconds
Seconds
Seconds
Hours
Storage and Shelf Life
Packaging
Component A: 500 lbNet Weight
2500 lbNet Weight
Component B: 450 lbNet Weight
2250 lbNet Weight
Non-Warranty: This information is furnished without warranty, expressed or implied, except that is accurate to the best knowledge of Eteco, Inc. The
data on these sheets relates only to the specific material designated herein. Eteco, Inc. assumes no legal responsibility for use or reliance upon
this data. The user should conduct sufficient investigation to establish the suitability of any product for its intended use.
55 gallon steel drum (closed top)
275 gallon plastic totes
55 gallon steel drum (open top)
Rise Time
Tack Free Time
RS 1405
TECHNICAL DATA SHEET
Spray Rigid Foam Polyurethane System
Final Cure Time
3 – 4
10 – 12
18 – 22
24
Mix Ratio by Volume
Mix Ratio by Weight
Viscocity @ 75 F
Color
Cream Time @ 75 F
For more information contact Eteco, Inc. (714) 480-1370 | info@etecoinc.com
www.etecoinc.com
Components should be kept well sealed in a dry place from 70 to 90 F. Shelf life of unopened
containers is six (6) months from manufacturing date. Mix Component B well prior to each use. Purge
opened containers with dry nitrogen before resealing. Refer to product SDS for more information.
RS 1405 is a two-component CFC, HCFC and HFC free polyurethane foam designed for spray in place
applications. This formulation is recommended where thermal insulation, structural integrity and
environmentally friendly efficient products are required. RS 1405 spray in place foam system shall be
applied in half inch passes or less, maximum 1 inch passes, using standard plural component
polyurethane foam high pressure, impingement mix temperature controlled equipment.
*Properties are typical and not for specifications*
K-Factor
Handling Characteristics
Tensile Strength
Closed Cell Content
Physical Properties (Final Product)
Free Rise Density
Compressive Strength
275 gallon plastic totes
Specific Gravity @ 75 F
by | Sep 27, 2025
Product Information
Units Test Method Results
pcf ASTM D-1622-03 4.5 – 5.5
psi ASTM D-1620 85
psi ASTM D-1623 110
BTU-in/hr-ft
2
– FASTM C-177 0.18 – 0.20
% ASTM D-1940 > 93%
Units Component A Component B
(A/B) 50 50
(A/B) 52 48
g/mL 1.22 – 1.24 1.04 – 1.07
cPs 180 – 220 600 – 800
– Amber Beige
Seconds
Seconds
Seconds
Hours
Storage and Shelf Life
Packaging
Component A: 500 lbNet Weight
2500 lbNet Weight
Component B: 450 lbNet Weight
2250 lbNet Weight
Non-Warranty: This information is furnished without warranty, expressed or implied, except that is accurate to the best knowledge of Eteco, Inc. The
data on these sheets relates only to the specific material designated herein. Eteco, Inc. assumes no legal responsibility for use or reliance upon
this data. The user should conduct sufficient investigation to establish the suitability of any product for its intended use.
55 gallon steel drum (closed top)
275 gallon plastic totes
55 gallon steel drum (open top)
Rise Time
Tack Free Time
RS 1405
TECHNICAL DATA SHEET
Spray Rigid Foam Polyurethane System
Final Cure Time
3 – 4
10 – 12
18 – 22
24
Mix Ratio by Volume
Mix Ratio by Weight
Viscocity @ 75 F
Color
Cream Time @ 75 F
For more information contact Eteco, Inc. (714) 480-1370 | info@etecoinc.com
www.etecoinc.com
Components should be kept well sealed in a dry place from 70 to 90 F. Shelf life of unopened
containers is six (6) months from manufacturing date. Mix Component B well prior to each use. Purge
opened containers with dry nitrogen before resealing. Refer to product SDS for more information.
RS 1405 is a two-component CFC, HCFC and HFC free polyurethane foam designed for spray in place
applications. This formulation is recommended where thermal insulation, structural integrity and
environmentally friendly efficient products are required. RS 1405 spray in place foam system shall be
applied in half inch passes or less, maximum 1 inch passes, using standard plural component
polyurethane foam high pressure, impingement mix temperature controlled equipment.
*Properties are typical and not for specifications*
K-Factor
Handling Characteristics
Tensile Strength
Closed Cell Content
Physical Properties (Final Product)
Free Rise Density
Compressive Strength
275 gallon plastic totes
Specific Gravity @ 75 F
by | Sep 27, 2025
Date: 1/26/22
RS 1402
Product Information
Physical Properties (Components)
Component A Component B
Viscocity at 75 F (cps) 180 – 220 1250-1350
Specific Gravity (gr/ml) 1.22 – 1.24 1.07-1.09
Physical Properties (Final Product)
Free Rise Density (pcf) 1.9 – 2.2
K-Factor (ASTM C-177) 0.15 – 0.18
Closed cell content (ASTM D-1940) Over 93%
Compressive Strength (psi) (ASTM D-1620) 20-25
Tensile Strength (psi) (ASTM D-1623) 42-45
Handling Characteristics
Mix Ratio by Weight (A/B) 50 / 50
Cream Time at 75 F(seconds) 4 – 7
Rise Time (seconds) 12 – 18
Tack Free Time (seconds) 12 – 18
90% Cure Time (hours) 4
Storage and Shelf Life
Packaging
Component A: 55 gallon steel drum (closed top) 500 lb Net Weight
275 gallon plastic totes 2500 lb Net Weight
Component B: 55 gallon steel drum (open top) 450 lb Net Weight
275 gallon plastic totes 2250 lb Net Weight
Components should be kept well sealed in a dry place from 70 to 90 F. Shelf life of unopened
containers is six (6) months from manufacturing date. Mix Component B well prior to each use. Purge
opened containers with dry nitrogen before resealing. Refer to product SDS for more information.
Non-Warranty: This information is furnished without warranty, expressed or implied, except that is accurate to the best
knowledge of Eteco, Inc. The data on these sheets relates only to the specific material designated herein. Eteco, Inc.
assumes no legal responsibility for use or reliance upon this data. The user should conduct sufficient investigation to establish
the suitability of any product for its intended use.
RS 1402 is a two-component CFC, HCFC and HFC free polyurethane foam designed for Spray in
place applications. This formulation is recommended where thermal insulation and environmentally
friendly efficient products are required. RS 1402 Spray in place foam system shall be applied in half
inch passes or less, maximum 1 inch passes, using standard plural component polyurethane foam
high pressure, impingement mix temperature controlled equipment.
by | Sep 27, 2025
Date: 1/26/22
RS 1402
Product Information
Physical Properties (Components)
Component A Component B
Viscocity at 75 F (cps) 180 – 220 1250-1350
Specific Gravity (gr/ml) 1.22 – 1.24 1.07-1.09
Physical Properties (Final Product)
Free Rise Density (pcf) 1.9 – 2.2
K-Factor (ASTM C-177) 0.15 – 0.18
Closed cell content (ASTM D-1940) Over 93%
Compressive Strength (psi) (ASTM D-1620) 20-25
Tensile Strength (psi) (ASTM D-1623) 42-45
Handling Characteristics
Mix Ratio by Weight (A/B) 50 / 50
Cream Time at 75 F(seconds) 4 – 7
Rise Time (seconds) 12 – 18
Tack Free Time (seconds) 12 – 18
90% Cure Time (hours) 4
Storage and Shelf Life
Packaging
Component A: 55 gallon steel drum (closed top) 500 lb Net Weight
275 gallon plastic totes 2500 lb Net Weight
Component B: 55 gallon steel drum (open top) 450 lb Net Weight
275 gallon plastic totes 2250 lb Net Weight
Components should be kept well sealed in a dry place from 70 to 90 F. Shelf life of unopened
containers is six (6) months from manufacturing date. Mix Component B well prior to each use. Purge
opened containers with dry nitrogen before resealing. Refer to product SDS for more information.
Non-Warranty: This information is furnished without warranty, expressed or implied, except that is accurate to the best
knowledge of Eteco, Inc. The data on these sheets relates only to the specific material designated herein. Eteco, Inc.
assumes no legal responsibility for use or reliance upon this data. The user should conduct sufficient investigation to establish
the suitability of any product for its intended use.
RS 1402 is a two-component CFC, HCFC and HFC free polyurethane foam designed for Spray in
place applications. This formulation is recommended where thermal insulation and environmentally
friendly efficient products are required. RS 1402 Spray in place foam system shall be applied in half
inch passes or less, maximum 1 inch passes, using standard plural component polyurethane foam
high pressure, impingement mix temperature controlled equipment.
by | Sep 27, 2025
Date: 8/24/18
RS 1202
Product Information
Physical Properties (Components)
Component A Component B
Viscocity at 75 F (cps) 180 – 220 600 – 800
Specific Gravity (gr/ml) 1.22 – 1.24 1.04 – 1.07
Physical Properties (Final Product)
Free Rise Density (pcf) 2.30 – 2.50
K-Factor (ASTM C-177) 0.18 – 0.20
Closed cell content (ASTM D-1940) Over 93%
Compressive Strength (psi) (ASTM D-1620) 37
Tensile Strength (psi) (ASTM D-1623) 59
Handling Characteristics
Mix Ratio by Weight (A/B) 50 / 50
Cream Time at 75 F(seconds) 3 – 4
Rise Time (seconds) 10 – 12
Tack Free Time (seconds) 10 – 12
90% Cure Time (hours) 4
Storage and Shelf Life
Packaging
Component A: 55 gallon steel drum (closed top) 500 lb Net Weight
275 gallon plastic totes 2500 lb Net Weight
Component B: 55 gallon steel drum (open top) 450 lb Net Weight
275 gallon plastic totes 2250 lb Net Weight
Components should be kept well sealed in a dry place from 70 to 90 F. Shelf life of unopened
containers is six (6) months from manufacturing date. Mix Component B well prior to each use. Purge
opened containers with dry nitrogen before resealing. Refer to product SDS for more information.
Non-Warranty: This information is furnished without warranty, expressed or implied, except that is accurate to the best
knowledge of Eteco, Inc. The data on these sheets relates only to the specific material designated herein. Eteco, Inc.
assumes no legal responsibility for use or reliance upon this data. The user should conduct sufficient investigation to establish
the suitability of any product for its intended use.
RS 1202 is a two-component CFC, HCFC and HFC free polyurethane foam designed for Spray in
place applications. This formulation is recommended where thermal insulation and environmentally
friendly efficient products are required. RS 1202 Spray in place foam system shall be applied in half
inch passes or less, maximum 1 inch passes, using standard plural component polyurethane foam
high pressure, impingement mix temperature controlled equipment.
by | Sep 27, 2025
Date: 8/24/18
RS 1202
Product Information
Physical Properties (Components)
Component A Component B
Viscocity at 75 F (cps) 180 – 220 600 – 800
Specific Gravity (gr/ml) 1.22 – 1.24 1.04 – 1.07
Physical Properties (Final Product)
Free Rise Density (pcf) 2.30 – 2.50
K-Factor (ASTM C-177) 0.18 – 0.20
Closed cell content (ASTM D-1940) Over 93%
Compressive Strength (psi) (ASTM D-1620) 37
Tensile Strength (psi) (ASTM D-1623) 59
Handling Characteristics
Mix Ratio by Weight (A/B) 50 / 50
Cream Time at 75 F(seconds) 3 – 4
Rise Time (seconds) 10 – 12
Tack Free Time (seconds) 10 – 12
90% Cure Time (hours) 4
Storage and Shelf Life
Packaging
Component A: 55 gallon steel drum (closed top) 500 lb Net Weight
275 gallon plastic totes 2500 lb Net Weight
Component B: 55 gallon steel drum (open top) 450 lb Net Weight
275 gallon plastic totes 2250 lb Net Weight
Components should be kept well sealed in a dry place from 70 to 90 F. Shelf life of unopened
containers is six (6) months from manufacturing date. Mix Component B well prior to each use. Purge
opened containers with dry nitrogen before resealing. Refer to product SDS for more information.
Non-Warranty: This information is furnished without warranty, expressed or implied, except that is accurate to the best
knowledge of Eteco, Inc. The data on these sheets relates only to the specific material designated herein. Eteco, Inc.
assumes no legal responsibility for use or reliance upon this data. The user should conduct sufficient investigation to establish
the suitability of any product for its intended use.
RS 1202 is a two-component CFC, HCFC and HFC free polyurethane foam designed for Spray in
place applications. This formulation is recommended where thermal insulation and environmentally
friendly efficient products are required. RS 1202 Spray in place foam system shall be applied in half
inch passes or less, maximum 1 inch passes, using standard plural component polyurethane foam
high pressure, impingement mix temperature controlled equipment.
by | Sep 27, 2025
by | Sep 27, 2025
