26CON15041B_TDS.pdf
Qingke Composite Co.,Ltd
Technical Data Sheet
Product Name continuous strant mat
Product No.: 26CON15041B
Main Specification
Product Specification Tolerance (+/-%) Result
Moisture content % 0.2-0.5 0.20
Loss on ignition % 7.46 1.0 7.56
binder % 7.46 1.0 7.58
Tensile Breaking force N/75mm Intensity Weft 150 175
Intensity Warp 60 76
Apperance N/A OK
Weight, total (g/m2) : 450g+/-45g
Standard roll width (cm) : 41 12 14 15
Standard roll weight(kg): 8.80kgs 10.20kgs 11kgs
Packaging:
Each roll is wound on paper tube (3 -4 Dia.) with plastic film and packed in
individual cardboard box.With pallet packing or without pallet packing upon
customer s request.
Storage:
Unless otherwise specified, it should be stored in a dry, cool and rainproof area;
it is recommended that the room temperature and humidity should be always
maintained at 35-65% respectively.
Issuing Date: 22 Nov.2018
26CDM3208A_TDS.pdf
Total Weight: 39.67oz/yd
2
1345.21g/m
2
60 Inches 1524.00 MM 100denierPolyesterYarn
248Pounds per roll112.71 KG per roll 7CPI 3.63mm stitch length
60 Yards per roll 180.00 FT per roll 0.36oz/yd
2
0.91%of Total AW
3 ” Core
Shrink wrapped 9 Rolls per Pallet
0 39.96% of Total AW
537.53 g/m
2
15.85oz/yd
2
(-)45 0.00% of Total AW
0.00g/m
2
0.00oz/yd
2
90 38.72% of Total AW
520.81 g/m
2
15.36oz/yd
2
(+)45 0.00% of Total AW
0.00g/m
2
0.00oz/yd
2
MAT/VEIL: 20.42% of Total AW
0.90 oz/ft
2
274.65g/m
2
8.10oz/yd
2
Fabric Specification Sheet
E-glass fiber
E-glass fiber
0
Roll Details Stitching Details
32oz/yd2 balanced 0/90 glass w/ chop
VT32008-60-2
0
E-glass fiber
26CDM3208-60A_TDS.pdf
TECHNICAL DATASHEET
SAP No. 30013898 Article Description B-S-E-1374g/m -1524mm
Textile Structure 7005611 SAERTEX
ARTICLE CONSTRUCTION (in accordance with EN 13473-1)
Layer Construction Areal weight Tolerance Material
3 0 614 g/m +/- 5.0 % E-glass 2,400 TEX
2 90 473 g/m +/- 5.0 % E-glass 2,400 TEX
1 CSM 275 g/m +/- 10.0 % Boron free glass
Stitching 12 g/m +/- 3 g/m PES [Polyester] 110 dtex
Fiber input can be determined individually
FURTHER CHARACTERISTICS
Gauge 7.0 Stitching pattern tricot-warp Width (nominal) 1524 mm
Stitch length 4.00 mm Total tolerance 6.2 % Total areal weight 1374 g/m
Labelling (Standard) Every roll is equipped with a label in the core. A further label is located outside on
the foil or on the box.
Packaging (Standard) Every roll is wound on a cardboard core and wrapped in foil. Further packaging
options can be determined individually.
Storage With original packaging: No moisture recommendation and direct sunlight.
To avoid problems with humidity and electrostatic charge, fabrics to be
conditioned 24 hours prior to processing, independent of storage conditions.
– Confidential Information –
SAERTEX USA, LLC. has been certified in accordance with ISO 9001:2015.
REINFORCING YOUR IDEAS
26CDM3208-50A_TDS.pdf
TECHNICAL DATASHEET
SAP No. 30005318 Article Description B-S-E-1374g/m -1270mm
Textile Structure 7005611 SAERTEX
ARTICLE CONSTRUCTION (in accordance with EN 13473-1)
Layer Construction Areal weight Tolerance Material
3 0 614 g/m +/- 5.0 % E-glass 2,400 TEX
2 90 473 g/m +/- 5.0 % E-glass 2,400 TEX
1 CSM 275 g/m +/- 10.0 % Boron free glass
Stitching 12 g/m +/- 3 g/m PES [Polyester] 110 dtex
Fiber input can be determined individually
FURTHER CHARACTERISTICS
Gauge 7.0 Stitching pattern tricot-warp Width (nominal) 1270 mm
Stitch length 4.00 mm Total tolerance 6.2 % Total areal weight 1374 g/m
Labelling (Standard) Every roll is equipped with a label in the core. A further label is located outside on
the foil or on the box.
Packaging (Standard) Every roll is wound on a cardboard core and wrapped in foil. Further packaging
options can be determined individually.
Storage With original packaging: No moisture recommendation and direct sunlight.
To avoid problems with humidity and electrostatic charge, fabrics to be
conditioned 24 hours prior to processing, independent of storage conditions.
– Confidential Information –
SAERTEX USA, LLC. has been certified in accordance with ISO 9001:2015.
REINFORCING YOUR IDEAS
26CDM2415B_TDS.pdf
TECHNICAL DATASHEET
SAP No. 30008021 Article Description B-S-E-1316g/m -1270mm
Textile Structure 7007815 SAERTEX
ARTICLE CONSTRUCTION (in accordance with EN 13473-1)
Layer Construction Areal weight Tolerance Material
3 0 402 g/m +/- 5.0 % E-glass 1,200 TEX
2 90 402 g/m +/- 5.0 % E-glass 1,200 TEX
1 CSM 500 g/m +/- 10.0 % Boron free glass
Stitching 12 g/m +/- 3 g/m PES [Polyester] 110 dtex
Fiber input can be determined individually
FURTHER CHARACTERISTICS
Gauge 7.0 Stitching pattern tricot-warp Width (nominal) 1270 mm
Stitch length 4.00 mm Total tolerance 7.1 % Total areal weight 1316 g/m
Labelling (Standard) Every roll is equipped with a label in the core. A further label is located outside on
the foil or on the box.
Packaging (Standard) Every roll is wound on a cardboard core and wrapped in foil. Further packaging
options can be determined individually.
Storage With original packaging: No moisture recommendation and direct sunlight.
To avoid problems with humidity and electrostatic charge, fabrics to be
conditioned 24 hours prior to processing, independent of storage conditions.
– Confidential Information –
SAERTEX USA, LLC. has been certified in accordance with ISO 9001:2015.
REINFORCING YOUR IDEAS
26CDM2408_TDS.pdf
PRODUCT INFORMATION
Product Code
REINFORCING FIBER SPECIFICATION STITCHING FIBER SPECIFICATION
*FIBER TYPE : E-GLASS *STITCHING : POLYESTER 75/D YARN
*AREAL WEIGHT : *STITCH WEIGHT :
*WEIGHT OF CSM: 225g/m2
*SIZE COMPATIBILITY : POLYESTER/EPOXY/VINYLESTER
*WIDTH (inches) :
PLY CONSTRUCTIONS
*WIDTH (inches) 1270mm *WIDTH (inches)
*WEIGHT 450 GSM *WEIGHT
-45 DEGREE
*FIBER SPECIFICATION DIRECT ROVING *FIBER SPECIFICATION
*FIBER TEX 1800 TEX *FIBER TEX
CDM2408
1156g/m2
1270mm
*FIBER TEX
* PLY 90 DEGREE * PLY
*WEIGHT
*FIBER SPECIFICATION
24g/m
0 DEGREE * PLY +45 DEGREE
DIRECT ROVING *FIBER SPECIFICATION
* PLY
*WEIGHT
*WIDTH (inches) 1270mm *WIDTH (inches)
1800/2200 TEX *FIBER TEX
457 GSM
26CDM2408C_TDS.pdf
TECHNICAL DATA SHEET
EBLT800(0/90)C240
Description
Multi-axial fabric is stitched with E-glass direct roving on tricot weft insertion machine. Its main characteristic
is that the warp and weft are laid in one or multiple layers at set angles, and stitched with the stitching
yarn. Meanwhile, chopped stands or non-woven fabrics can be inserted thereinto.
Compatible with unsaturated polyester, vinyl and epoxy resin, applied to production of wind blades, yachts,
boats, sports facilities etc.
Characteristics Product code
Roving in fabric maintains high strength without bending EBLT800(0/90)C240UP-1270E7
Lower resin consumption and lower weight of final product EBLT E-glass biaxial fabric
Smooth surface on the composites, with minimized fabric trails 800 Unit weight
High fiber content in final product to increase its mechanical properties 240 Chopped strand mat
UP Unsaturated polyester
Technical Data
Structure specification for EBLT800(0/90)C240UP
Layer process
Layer Weight(g) Roving
0 420 1500tex
90 370 1200tex
240 240 2400tex
stitch 13 Polyester thread
Packaging
Taishan multi-axial fabric is of unfixed roll weight, packed in PE bags by roll, put into cartons or
wrapped with kraft paper, and put flat on the pallets or in bulk package and pallets should not be
stacked more than 2 layers.
Storage
This product should be stored in a dry, cool and rainproof place, with temperature from 5 to 35
and humidity between 35% and 65%. It is recommended to be put under room temperature for over
24 hours prior to use. Keeping in intact package when not used to avoid damp
26CDM1808_TDS.pdf
Introduction
CDM Fabric is made of two layers of input roving which is laid down at precise warp and weft angles with backing
mat. The input roving varies according to different specification. It’s a high performance fabric compatible with many
resin systems
It’s widely used in hand lay-up, pultrusion, RTM process
for various industries such as: vessels, boats, containers, aircraft, 0 / 90
automotive parts, wind blades,sport equipment, tanks & pipes, panels, etc
Features
High mechanical strength, high impact reponse, fast wet-out
Better surface finish, excellent laminate properties
Product & Specification
Test Standard Tolerance
(oz./sq.yd)(g/sq.m) %
413yield (1200tex) ISO 3374 9.73 330 5
550yield (900tex) ISO 3374 7.96 270 5
207yield (2400tex) ISO 3374 8.11 275 10
Polyester 83 Denier ISO 3374 0.29 10 5
ISO 3374 26.10 885 7
Physical propertyTest Standard control data
Basic weight ISO 3374 5%
ISO 3344 0.2%
ISO 1887 0.4% -4.0%
Tech. Parameter & Package
It’s wrapped with plastic film and packed in carton. Both large roll and standard roll available:
Roll Type:Standard Roll
Roll Width:50″ / 1270mm
Roll Weight:110.2 lb / 50kg
Roll Length:48.7 yd /44.5m
16 ctn/plt, 1763lb/plt, (800kg)
12 ctn/plt, 1322lb/plt, (600kg)
Storage:
Stored under dry, cool condiction. Temperature and humidity to be 15 – 35 and 35% – 65%.
The fiberglass materials should remain in good package before being used.
CDM1808
S203
178.6 lb / 81kg
78.7 yd / 72m
Package:
9 ctn/plt, 1607lb/plt, (729kg)
6 ctn/plt, 1071lb/plt, (486kg)
chopped mat
polyester stitch
Total Weight
Moisture content
Ignition Loss
50″ /1270mm
Large Roll
Architecture Yield Input Area Weight
Warp 0
Weft 90
26CDM1808B_TDS.pdf
Introduction
Multi-Axail Fabric is made of several layers of input roving which is laid down at precise angles and knitted together.
The input roving varies according to different specification. It’s a high performance fabric compatible with various.
resin systems
It’s widely used in hand lay-up, pultrusion, RTM process
for various industries such as: vessels, boats, containers, aircraft, 0 / 90
automotive parts, wind blades,sport equipment, tanks & pipes, panels, etc
Features
High mechanical strength, high impact reponse, fast wet-out
Better surface finish, excellent laminate properties
Product & Specification
Test Standard Tolerance
(oz./sq.yd)(g/sq.m) %
413yield (1200tex) ISO 3374 9.90 336 5
413yield (1200tex) ISO 3374 7.75 264 5
207yield (2400tex) ISO 3374 8.11 275 10
ISO 3374 0.29 10 5
ISO 3374 27.00 885 7
Physical propertyTest Standard control data
Basic weight ISO 3374 5%
ISO 3344 0.2%
ISO 1887 0.4% -4.0%
Tech. Parameter & Package
It’s wrapped with plastic film and packed in carton. Both large roll and standard roll available:
Roll Type Large Roll Large Roll Standard Roll
Roll Width:60″ / 1524mm
Roll Weight:213.9 lb / 97kg
Roll Length:76.1 yd / 69.6m
9 ctn/plt, 1925lb/plt, 873kg/plt
6 ctn/plt, 1283lb/plt, 582kg/plt
Storage:
Stored under dry, cool condiction. Temperature and humidity to be 15 – 35 and 35% – 65%.
The fiberglass materials should remain in good package before being used.
50″ /1270mm
178.6 lb / 81kg 110.2 lb / 50kg
76.2 yd / 69.7m 47 yd / 43m
Package:
9 ctn/plt, 1607lb/plt, 729kg/plt16 ctn/plt, 1764lb/plt, 800kg/plt
6 ctn/plt, 1071lb/plt, 486kg/plt12 ctn/plt, 1323lb/plt, 600kg/plt
chopped mat
polyester stitch
Total Weight
Moisture content
Ignition Loss
50″ /1270mm
CDM1808
Architecture Yield Input Area Weight
Warp 0
Weft 90