by | Sep 27, 2025
!
Product Data
HexWeb CR III
Corrosion Resistant Specification Grade Aluminum Honeycomb
!
Description
5052 and 5056 expanded aerospace grade aluminum honeycomb materials are available in a wide selection of
cell sizes and foil gauges. The HexWeb CR III coating has been developed to offer superior protection for aluminum
honeycomb exposed to corrosive environments. The HexWeb CR III system offers a clear protective film that
interacts with the aluminum surface forming a stable, tightly adherent bond. The coating is primarily an organo-
metallic polymer type that differs from the normal conversion-type corrosion protective coatings.
Features
! Aerospace structural grade honeycomb ! Excellent corrosion resistance ! Highest strength and rigidity to weight ratio as a sandwich core ! Maintain corrosion protection at elevated temperatures ! Available in 5052 and 5056 alloys
Applications
Aluminum HexWeb CR III Specification Grade honeycomb materials are predominantly used in sandwich structures
to meet design requirements for highly engineered structural components. As a structural core material, it finds
applications in all types of aerospace vehicles and supporting equipment where sandwich structure offers rigid panels
of minimum weight, aerodynamic smooth surfaces, and high fatigue resistance. The same structural properties are
also used for commercial applications such as tools, snow and water skis, bulkheads, and floors. Other nonstructural
uses are directional air/fluid flow control, RF shielding, and energy absorption.
Type Designation
HexWeb CR III aluminum honeycomb is designated as follows:
Material Cell size Alloy Density
Example: CR-III 3/16 5052 3.1N
Where
CR III designates corrosion resistant honeycomb
3/16 is the cell size in inches
5052 is the alloy of the aluminum
N indicates the cell walls are not perforated.
P indicates cell walls are perforated, and is available on special order
3.1 is the nominal density in pounds per cubic foot
5052 and 5056 are supplied in the H-39 temper
!
HexWeb CR III Product Data
!
Dimensional Nomenclature
T = Thickness, or cell depth
L = Ribbon direction, or longitudinal direction
W = Transverse direction, or direction perpendicular
to the ribbon
Availability
Lead time varies with the honeycomb type. Please contact a Hexcel Sales Office or Hexcel Customer Service for
price and delivery information.
Specifications
HexWeb CR III expanded aluminum honeycomb materials meet the requirements of Military Specification
MIL-C7438 where applicable.
Standard Dimensions
HexWeb CR III 5052 and 5056 aluminum honeycomb is available in the following standard size:
On special orders Hexcel has the capability of manufacturing HexWeb CR III honeycomb panels in the L dimensions
up to 60 inches maximum, W dimensions up to 150 inches maximum, and T dimensions up to 34 inches maximum,
subject to limitations on some products. Larger sizes may be produced by splicing. Contact the nearest Hexcel Sales
Office for additional information.
Dimensional Tolerances
Tolerances on cut thickness for standard size and smaller sheets are as follows:
Sheet Thickness Standard Tolerances
0.250 in. to 3.999 in. 0.005 in.
4.000 in. and over 0.062 in.
Contact your nearest Hexcel Sales Office with regard to specific dimensional tolerances.
Expanded Sheets
L W Nominal Sq.Ft.
48 in. + 3 in. – 0 in. 96 in. + 4 in. – 0 in. 32.00
!
!
HexWeb CR III Product Data
!
Density Tolerance
The nominal densities of the 5052 and 5056 expanded aluminum honeycomb products are shown in Table 1 and II.
The standard density tolerance from the normal density is 10%.
Custom Processing
Aluminum honeycomb can be provided machined or formed ready for bonding. Hexcel has complete facilities for the
manufacture of honeycomb core parts and core assembles. Capabilities include all types of adhesive edge splicing,
machining of simple or compound taper elements with plane or compound curved surfaces, machining of relief areas,
chamfering, drilling, plan form contouring, curvature forming, and similar operations.
Special Products
In addition to the HexWeb CR III hexagonal core honeycomb, Hexcel makes 5052 and 5056 aluminum honeycomb
in several other specialized cell configurations and products; e.g., Flex-Core (Data Sheet 2700), exceptional
formable core material; Corrugated and Reinforced Corrugated Core (Data Sheet 2400), and higher density cores
with superior compressive and crush strengths.
Contact your nearest Hexcel Sales Office for information on these specialized products and on specific processing
requirements.
Mechanical Properties
Mechanical properties of HexWeb CR III 5052 and 5056 alloy honeycomb are shown in Table I and II, respectively.
A major advantage of the HexWeb CR III organo-metallic polymer coating over typical coatings is that HexWeb
CR III is much more resistant to salt spray exposure combined with a prior elevated temperature exposure. Shear
strength retention after 350 F heat aging for up to 500 hours and 30-day salt spray exposure is approximately 88% of
room temperature properties with no salt spray exposure; weight loss is considerably less than the maximum
permissible per MIL-C-7438 for corrosion resistant aluminum honeycomb.
!
HexWeb CR III Product Data
!
Table I: HexWeb CR III 5052 Hexagonal Aluminum Honeycomb
Typical values (typ) are presented below, as well as minimum average (min) for a product type.
Cell
Size
Nominal
Density
pcf
Compressive Strength Crush
Strength
psi
Plate Shear
Bare Stabilized L Direction W Direction
Strength
psi
Strength
psi
Modules
ksi
Strength
psi
Modulus
ksi
Strength
psi
Modulus
ksi
typ min typ min typ typ typ min typ typ min typ
1/8 3.1 285 200 300 215 75 130 210 155 45.0 130 90 22.0
1/8 4.5 550 375 570 405 150 260 340 285 70.0 220 168 31.0
1/8 6.1 980 650 1020 680 240 450 560 455 98.0 340 272 41.0
1/8 8.1 1500 1000 1560 1100 350 750 800 670 135.0 470 400 54.0
1/8 10.0 2100p 1575p 2250p 1685p 980p 735p 175.0p 550p 415p 65.0p
1/8 12.0 2700 2100 2900 2200 900 1940I 1250I 1430I 1000I
5/32 2.6 220 150 240 160 55 90 165 120 37.0 100 70 19.0
5/32 3.8 395 285 410 300 110 185 270 215 56.0 165 125 26.4
5/32 5.3 690 490 720 535 195 340 420 370 84.0 270 215 36.0
5/32 6.9 1080 770 1130 800 285 575 590 540 114.0 375 328 46.4
5/32 8.4 1530 1070 1160 1180 370 800 760 690 140.0 475 420 56.0
3/16 2.0 160 90 175 100 34 60 120 80 27.0 70 46 14.3
3/16 3.1 290 200 335 215 75 130 210 155 45.0 125 90 22.0
3/16 4.4 520 360 550 385 145 250 330 280 68.0 215 160 30.0
3/16 5.7 820 560 860 600 220 390 460 410 90.0 300 244 38.5
3/16 6.9 1120 770 1175 800 285 575 590 540 114.0 375 328 46.4
3/16 8.1 1600 1000 1720 1100 350 750 725 670 135.0 480 400 54.0
1/4 1.6 90 60 100 70 20 40 85 60 21.0 50 32 11.0
1/4 2.3 190 120 210 130 45 75 140 100 32.0 85 57 16.2
1/4 3.4 340 240 370 250 90 150 230 180 50.0 140 105 24.0
1/4 4.3 500 350 540 370 140 230 320 265 66.0 200 155 29.8
1/4 5.2 690 500 760 510 190 335 410 360 82.0 265 200 35.4
1/4 6.0 990 630 1100 660 235 430 530 445 96.0 340 265 40.5
3/8 1.0 50 20 55 20 10 25 45 32 12.0 30 20 7.0
3/8 1.6 90 60 95 70 20 40 85 60 21.0 50 32 11.0
3/8 2.3 190 120 200 130 45 75 135 100 32.0 80 57 16.2
3/8 3.0 285 190 310 200 70 120 200 145 43.0 125 85 21.2
3/8 3.7 370 270 410 285 105 180 250 200 55.0 160 115 26.0
3/8 4.2 520 335 560 355 135 220 310 255 65.0 200 150 29.0
Test data obtained at 0.625 inch thickness.
p = preliminary
x = predicted values
I = beam shear for 12.0 pcf products.
maximum block size 48 in. x 60 in., maximum thickness = 1.00 in.
Other cell sizes, densities, and dimensions are available on special request. Please contact your nearest Hexcel
Sales Office for additional information. One block minimum buy may apply.
!
HexWeb CR III Product Data
!
Table II: HexWeb CR III 5056 Hexagonal Aluminum Honeycomb
Typical values (typ) are presented below, as well as minimum average (min) for a product type.
Cell
Size
Nominal
Density
pcf
Compressive Strength
Crush
Strength
psi
Plate Shear
Bare Stabilized L Direction W Direction
Strength
psi
Strength
psi
Modules
ksi
Strength
psi
Modulus
ksi
Strength
psi
Modulus
ksi
typ typ min typ min typ typ typ min typ typ min typ
1/8 3.1 320 250 350 260 97 170 250 200 45.0 155 110 20.0
1/8 4.5 6300 475 690 500 185 320 440 350 70.0 255 205 28.0
1/8 6.1 1120 780 1200 825 295 535 690 525 102.0 400 305 38.0
1/8 8.1 1750 1200 1900 1300 435 810 945 740 143.0 560 440 51.0
5/32 2.6 250 180 265 185 70 120 200 152 37.0 115 80 17.0
5/32 3.8 450 360 500 375 140 235 335 272 57.0 195 155 24.0
5/32 5.3 820 615 865 650 240 420 550 435 85.0 325 250 33.0
5/32 6.9 1220 920 1340 1000 350 650 760 610 118.0 430 360 43.0
3/16 2.0 190 110 200 120 45 75 140 105 27.0 85 50 13.0
3/16 3.1 380 250 410 260 97 170 265 200 45.0 150 110 20.0
3/16 4.4 620 460 670 490 180 310 425 340 68.0 245 198 27.0
3/16 5.7 920 685 1000 735 270 480 565 480 94.0 330 280 36.0
1/4 1.6 100 75 110 80 30 50 90 78 20.0 60 38 10.5
1/4 2.3 240 145 265 155 58 100 180 130 32.0 100 62 15.0
1/4 3.4 400 300 480 315 115 200 290 230 50.0 175 130 22.0
1/4 4.3 580 440 620 465 172 300 400 325 67.0 230 190 27.0
1/4 5.2 790 600 820 645 230 410 490 425 84.0 300 245 32.0
3/8 1.0 55 25 60 35 15 35 55 45 15.0 35 25 6.8
3/8 1.6 100 75 110 80 30 50 90 78 20.0 60 38 10.5
3/8 2.3 215 155 225 155 58 100 170 130 32.0 95 62 15.0
3/8 3.0 320 240 340 260 92 160 245 190 43.0 145 100 19.0
Test data obtained at 0.625 inch thickness.
Other cell sizes, densities, and dimensions are available on special request. Please contact your nearest Hexcel
Sales Office for additional information. One block minimum buy may apply.
!
HexWeb CR III Product Data
!
!
Important
Hexcel Corporation believes, in good faith, that the technical data and other information provided herein is materially
accurate as of the date this document is prepared. Hexcel reserves the right to modify such information at any time.
The performance values in this data sheet are considered representative but do not and should not constitute
specification minima. The only obligations of Hexcel, including warranties, if any, will be set forth in a contract signed
by Hexcel or in Hexcel’s then current standard Terms and Conditions of Sale as set forth on the back of Hexcel’s
Order Acknowledgement.
!
For more information
Hexcel is a leading worldwide supplier of composite materials to aerospace and other demanding industries.
Our comprehensive product range includes:
! Carbon Fiber ! Reinforced Fabrics ! Carbon, Glass, Aramid and Hybrid Prepregs ! RTM Materials
! Engineered Core ! HexTOOL composite tooling material ! Structural Film Adhesives ! Honeycomb Cores
!
For US quotes, orders and product information call toll-free 1-800-688-7734. For other worldwide sales office
telephone numbers and a full address list, please click here: http://www.hexcel.com/contact/salesoffices.
Copyright 2015 Hexcel Corporation All Rights Reserved. HexWeb, Flex-Core, Tube-Core, Hexcel and the Hexcel logos are registered
trademarks of Hexcel Corporation, Stamford Connecticut March 2015
by | Sep 27, 2025
TECHNICAL DATASHEET
SAP No. 30005130 Article Description SAERcore 450/PP18/450 – 1250mm
Textile Structure 7005544 SAERcore
ARTICLE CONSTRUCTION (in accordance with EN 13473-1)
Layer Construction Areal weight Tolerance Material
3 CSM 450 g/m +/- 10.0 % E-glass
2 Core 180 g/m +/- 10.0 % Polypropylen
1 CSM 450 g/m +/- 10.0 % E-glass
Stitching 7 g/m +/- 2 g/m Polyamide 6.6 122 dtex
Fiber input can be determined individually
FURTHER CHARACTERISTICS
Gauge 3.5 Stitching pattern tricot Width (nominal) 1250 mm
Stitch length 4.00 mm Total tolerance 10.1 % Total areal weight 1087 g/m
Labelling (Standard) Every roll is equipped with a label in the core. A further label is located outside on
the foil or on the box.
Packaging (Standard) Every roll is wound on a cardboard core and wrapped in foil. Further packaging
options can be determined individually.
Storage With original packaging: No moisture recommendation and direct sunlight.
To avoid problems with humidity and electrostatic charge, fabrics to be
conditioned 24 hours prior to processing, independent of storage conditions.
Important advice The Z side of the stitching line should be place preferably on the cosmetic
face to obtain the best surface finish.
– Confidential Information –
SAERTEX USA, LLC. has been certified in accordance with ISO 9001:2015.
REINFORCING YOUR IDEAS
by | Sep 27, 2025
TECHNICAL DATASHEET
SAP No. 30005153 Article Description SAERcore 450/PP25/450 – 1250mm
Textile Structure 7005549 SAERcore
ARTICLE CONSTRUCTION (in accordance with EN 13473-1)
Layer Construction Areal weight Tolerance Material
3 CSM 450 g/m +/- 10.0 % E-glass
2 Core 250 g/m +/- 10.0 % Polypropylen
1 CSM 450 g/m +/- 10.0 % E-glass
Stitching 7 g/m +/- 2 g/m Polyamide 6.6 122 dtex
Fiber input can be determined individually
FURTHER CHARACTERISTICS
Gauge 3.5 Stitching pattern tricot Width (nominal) 1250 mm
Stitch length 4.00 mm Total tolerance 10.1 % Total areal weight 1157 g/m
Labelling (Standard) Every roll is equipped with a label in the core. A further label is located outside on
the foil or on the box.
Packaging (Standard) Every roll is wound on a cardboard core and wrapped in foil. Further packaging
options can be determined individually.
Storage With original packaging: No moisture recommendation and direct sunlight.
To avoid problems with humidity and electrostatic charge, fabrics to be
conditioned 24 hours prior to processing, independent of storage conditions.
Important advice The Z side of the stitching line should be place preferably on the cosmetic
face to obtain the best surface finish.
– Confidential Information –
SAERTEX USA, LLC. has been certified in accordance with ISO 9001:2015.
REINFORCING YOUR IDEAS
by | Sep 27, 2025
TECHNICAL DATASHEET
SAP No. 30007817 Article Description SAERcore 300/PP13/300 – 1250mm
Textile Structure 7007850 SAERcore
ARTICLE CONSTRUCTION (in accordance with EN 13473-1)
Layer Construction Areal weight Tolerance Material
3 CSM 300 g/m +/- 10.0 % E-glass
2 Core 135 g/m +/- 10.0 % Polypropylen
1 CSM 300 g/m +/- 10.0 % E-glass
Stitching 7 g/m +/- 2 g/m Polyamide 6.6 122 dtex
Fiber input can be determined individually
FURTHER CHARACTERISTICS
Gauge 3.5 Stitching pattern tricot Width (nominal) 1250 mm
Stitch length 4.00 mm Total tolerance 10.2 % Total areal weight 742 g/m
Labelling (Standard) Every roll is equipped with a label in the core. A further label is located outside on
the foil or on the box.
Packaging (Standard) Every roll is wound on a cardboard core and wrapped in foil. Further packaging
options can be determined individually.
Storage With original packaging: No moisture recommendation and direct sunlight.
To avoid problems with humidity and electrostatic charge, fabrics to be
conditioned 24 hours prior to processing, independent of storage conditions.
Important advice The Z side of the stitching line should be place preferably on the cosmetic
face to obtain the best surface finish.
– Confidential Information –
SAERTEX USA, LLC. has been certified in accordance with ISO 9001:2015.
REINFORCING YOUR IDEAS
by | Sep 27, 2025
TECHNICAL DATASHEET
SAP No. 30007553 Article Description SAERflow 150/BX304 – 1270mm
Textile Structure 7007999 SAERTEX
ARTICLE CONSTRUCTION (in accordance with EN 13473-1)
Layer Construction Areal weight Tolerance Material
5 CSM 150 g/m +/- 10,0 % E-glass
4 0 10 g/m +/- 5,0 % E-glass 34 TEX
3 45 134 g/m +/- 5,0 % – Hybrid Glass 380,00 TEX
2 0 10 g/m +/- 5,0 % E-glass 34 TEX
1 45 134 g/m +/- 5,0 % – Hybrid Glass 380,00 TEX
Stitching 7 g/m +/- 2 g/m Polyamide 6.6 122 dtex
Fiber input can be determined individually
FURTHER CHARACTERISTICS
Gauge 3,5 Stitching pattern tricot Width (nominal) 1270 mm
Stitch length 4,00 mm Total tolerance 7,1 % Total areal weight 445 g/m
Labelling (Standard) Every roll is equipped with a label in the core. A further label is located outside on
the foil or on the box.
Packaging (Standard) Every roll is wound on a cardboard core and wrapped in foil. Further packaging
options can be determined individually.
Storage Keep in original packaging. Store in a dry environment. Avoid direct sunlight.
(recommendation) Fabrics to be kept under processing conditions at least 24 hours
prior to use to avoid problems with humidity and electrostatic charge.
– Confidential Information –
SAERTEX USA, LLC. has been certified in accordance with ISO 9001:2015.
REINFORCING YOUR IDEAS
by | Sep 27, 2025
Combiflow
Ahlstrom Corporation
Ahlstrom Combiflow is a special reinforcement for closed mold processes.
It consists of three layers; two layers of chopped glassfiber on the surfaces and a porous elastic layer in
the middle providing an excellent resin flow. The elastic layer is marked with SP code.
PRODUCT
CODE
PRODUCT IDENTIFICATION
OZ/FT2
COMBIFLOW
THICKNESS MIL
DIN53855
LAMINATE
THICKNESS MIL
A31300 M1.0/SP180/M1.0 134 65-130
A31450 M1.5/SP180/M1.5 185 80-150
A31600 M2.0/SP180/M2.0 235 90-170
A32300 M1.0/SP250/M1.0 170 75-150
A32450 M1.5/SP250/M1.5 215 90-165
A32600 M2.0/SP250/M2.0 270 100-190
+ optionally surface tissue A80
Ahlstrom Combiflow s binder free construction gives excellent drape ability, very good resin flow and
good compatibility with resins.
The products easy lay up in the mold and very high wetting capacity increase productivity and make your
production more economical.
Good surface finish as well as high glass content with high mechanical properties can be reached with
Ahlstrom Combiflow. Above all preforming can be omitted in most applications.
MECHANICAL DATA UNIT M1.5/SP180/M1.5 STD
Tensile Strength Mpa 122 ISO 3238
Tensile Modulus Mpa 7900 ISO 3268
Erogation at Break % 2.3 ISO 3268
Flexural Strength MPa 151 ISO 178
Flexural Modulus MPa 6300 ISO 178
Fiber Content %-w 35.4 ISO 1172
Matrix Polyester Resin – –
FRP Services reserves the right to change the information given herein without prior notice. We believe this information to be reliable, but
do not guarantee its applicability to the user s process or assume liability for occurrence arising out of its use. The user, by accepting
products described herein agrees to be responsible for thoroughly testing any application before committing to production.
FRP SERVICES & COMPANY
1-15-9 Awaza, Nishi-ku, Osaka 550-0011, Japan
TEL:+81-6-6535-1933 FAX:+81-6-6535-1675
www.frpservices.com
COMPARISON TEST UNIT
COMBIFLOW
M1.5/SP180/M1.5
CFM 1.5oz/ft2
Tensile Strength MPa 151 76
Elongation at Break % 2.5 2.0
E-Modulus MPa 9113 5366
Energy/Work Nmm 5303 2709
Flexural Strength Mpa 191 134
Flexion % 3.4 3.1
E-Modulus MPa 7309 5118
Energy/Work Nmm 4185 3248
Impact Strength KJ/m2 47.9 39.8
Shear Strength MPa 31.1 26.5
Barcol Hardness – 50-55 35-45
Glass Content %-w 41.0 30.3
Number of Layers – 3 6
Thickness mil – 180-200 215-235
*TEST METHOD Polyester Resin: Viscosity 200cP Curling System: 1%Col%=1%MEKP Laminate
Size: 16″X32″ Application: Between Films Vacuum 0.6 bar Resin Injection Time: 8and 15mins
Packaging
WIDTH
INCH
ROLL
LENGTH(yd)
PALLET
WEIGHT(lb)
QUANTITY PER FCL 20′
(lb)
A31300 M1.0/SP180/M1.0 50 49 386 7,720
A31450 M1.5/SP180/M1.5 50 44 457 9,140
A31600 M2.0/SP180/M2.0 50 38 530 10,600
A32300 M1.0/SP250/M1.0 50 38 326 6,520
A32450 M1.5/SP250/M1.5 50 38 442 8,840
A 32600 M2.0/SP250/M2.0 50 27 398 7,960
* Every roll is individually wrapped, 4 rolls on pallet, 20 pallets per 20’FCL
This product is specially made for exclusive sale into the NAFTA-countries and South America.
SOLE AGENTS FOR NORTH & SOUTH AMERICA, JAPAN, ASIA PACIFIC
FRP SERVICES & COMPANY
by | Sep 27, 2025
TECHNICAL DATASHEET
SAP No. 30005131 Article Description SAERcore 300/PP18/300 – 1250mm
Textile Structure 7005542 SAERcore
ARTICLE CONSTRUCTION (in accordance with EN 13473-1)
Layer Construction Areal weight Tolerance Material
3 CSM 300 g/m +/- 10.0 % E-glass
2 Core 180 g/m +/- 10.0 % Polypropylen
1 CSM 300 g/m +/- 10.0 % E-glass
Stitching 7 g/m +/- 2 g/m Polyamide 6.6 122 dtex
Fiber input can be determined individually
FURTHER CHARACTERISTICS
Gauge 3.5 Stitching pattern tricot Width (nominal) 1250 mm
Stitch length 4.00 mm Total tolerance 10.2 % Total areal weight 787 g/m
Labelling (Standard) Every roll is equipped with a label in the core. A further label is located outside on
the foil or on the box.
Packaging (Standard) Every roll is wound on a cardboard core and wrapped in foil. Further packaging
options can be determined individually.
Storage With original packaging: No moisture recommendation and direct sunlight.
To avoid problems with humidity and electrostatic charge, fabrics to be
conditioned 24 hours prior to processing, independent of storage conditions.
Important advice The Z side of the stitching line should be place preferably on the cosmetic
face to obtain the best surface finish.
– Confidential Information –
SAERTEX USA, LLC. has been certified in accordance with ISO 9001:2015.
REINFORCING YOUR IDEAS
by | Sep 27, 2025
TECHNICAL DATASHEET
SAP No. 30005131 Article Description SAERcore 300/PP18/300 – 1250mm
Textile Structure 7005542 SAERcore
ARTICLE CONSTRUCTION (in accordance with EN 13473-1)
Layer Construction Areal weight Tolerance Material
3 CSM 300 g/m +/- 10,0 % E-glass
2 Core 180 g/m +/- 10,0 % Polypropylen
1 CSM 300 g/m +/- 10,0 % E-glass
Stitching 7 g/m +/- 2 g/m Polyamide 6.6 122 dtex
Fiber input can be determined individually
FURTHER CHARACTERISTICS
Gauge 3,5 Stitching pattern tricot Width (nominal) 1250 mm
Stitch length 4,00 mm Total tolerance 10,2 % Total areal weight 787 g/m
Labelling (Standard) Every roll is equipped with a label in the core. A further label is located outside on
the foil or on the box.
Packaging (Standard) Every roll is wound on a cardboard core and wrapped in foil. Further packaging
options can be determined individually.
Storage Keep in original packaging. Store in a dry environment. Avoid direct sunlight.
(recommendation) Fabrics to be kept under processing conditions at least 24 hours
prior to use to avoid problems with humidity and electrostatic charge.
Important advice The Z side of the stitching line should be place preferably on the cosmetic
face to obtain the best surface finish.
– Confidential Information –
SAERTEX USA, LLC. has been certified in accordance with ISO 9001:2015.
REINFORCING YOUR IDEAS
by | Sep 27, 2025
TECHNICAL DATASHEET
SAP No. 30005131 Article Description SAERcore 300/PP18/300 – 1250mm
Textile Structure 7005542 SAERcore
ARTICLE CONSTRUCTION (in accordance with EN 13473-1)
Layer Construction Areal weight Tolerance Material
3 CSM 300 g/m +/- 10.0 % E-glass
2 Core 180 g/m +/- 10.0 % Polypropylen
1 CSM 300 g/m +/- 10.0 % E-glass
Stitching 7 g/m +/- 2 g/m Polyamide 6.6 122 dtex
Fiber input can be determined individually
FURTHER CHARACTERISTICS
Gauge 3.5 Stitching pattern tricot Width (nominal) 1250 mm
Stitch length 4.00 mm Total tolerance 10.2 % Total areal weight 787 g/m
Labelling (Standard) Every roll is equipped with a label in the core. A further label is located outside on
the foil or on the box.
Packaging (Standard) Every roll is wound on a cardboard core and wrapped in foil. Further packaging
options can be determined individually.
Storage With original packaging: No moisture recommendation and direct sunlight.
To avoid problems with humidity and electrostatic charge, fabrics to be
conditioned 24 hours prior to processing, independent of storage conditions.
Important advice The Z side of the stitching line should be place preferably on the cosmetic
face to obtain the best surface finish.
– Confidential Information –
SAERTEX USA, LLC. has been certified in accordance with ISO 9001:2015.
REINFORCING YOUR IDEAS
