by | Sep 27, 2025
TECHNICAL DATASHEET
SAP No. 30012310 Article Description SAERcore 300/PP135/300 – 1250mm
Textile Structure 7007807 SAERcore
ARTICLE CONSTRUCTION (in accordance with EN 13473-1)
Layer Construction Areal weight Tolerance Material
3 CSM 300 g/m +/- 10.0 % E-glass
2 Fleece 135 g/m +/- 10.0 % Polypropylen
1 CSM 300 g/m +/- 10.0 % E-glass
Stitching 7 g/m +/- 2 g/m Polyamide 6.6 122 dtex
Fiber input can be determined individually
FURTHER CHARACTERISTICS
Gauge 3.5 Stitching pattern tricot Width (nominal) 1250 mm
Stitch length 4.00 mm Total tolerance 10.2 % Total areal weight 742 g/m
Labelling (Standard) Every roll is equipped with a label in the core. A further label is located outside on
the foil or on the box.
Packaging (Standard) Every roll is wound on a cardboard core and wrapped in foil. Further packaging
options can be determined individually.
Storage With original packaging: No moisture recommendation and direct sunlight.
To avoid problems with humidity and electrostatic charge, fabrics to be
conditioned 24 hours prior to processing, independent of storage conditions.
Important advice The Z side of the stitching line should be place preferably on the cosmetic
face to obtain the best surface finish.
– Confidential Information –
SAERTEX USA, LLC. has been certified in accordance with ISO 9001:2015.
REINFORCING YOUR IDEAS
by | Sep 27, 2025
ISO 9001:2015 Registered
Page 1 of 2
Standard sheet sizes up to 5 X 12
Nominal Density lb/ft
3
32 38 40
Tensile Strength, psi ASTM D 1037 1960 6660 8150
Modulus, psi 97100 311000 400000
Flexure Strength, psi ASTM C 393 3840 5380 7570
Modulus, psi 263000 512000 605000
Compression Strength, psi
@2.5% Strain
ASTM D 1621
866 658 742
Modulus, psi 26600 29500 34500
Thermo-Lite Board Series Versatile Tough Supreme
0.25 Thickness
Nominal Density lb/ft
3
15 20 24 28 28 20
Tensile Strength, psi ASTM D 1037 1230 1730 1860 5420 6570 3085
Modulus, psi 79625 86300 94200 256000 327000 196330
Flexure Strength, psi ASTM C 393 1482 2720 3070 4780 6760 3584
Modulus, psi 127123 208000 223000 456000 550000 380065
Compression Strength, psi
@2.5% Strain
ASTM D 1621
240 473 647 484 523 296
Modulus, psi 9756 19700 26200 20100 21300 12161
0.50 Thickness
Nominal Density lb/ft
3
13 20 24 26 26 18
Tensile Strength, psi ASTM D 1037 1107 1890 2010 4450 5330 2038
Modulus, psi 67211 99300 107000 223000 281000 112968
Flexure Strength, psi ASTM C 393 1691 2640 2990 4300 6110 2757
Modulus, psi 159063 198000 212000 407000 502000 280106
Compression Strength, psi
@2.5% Strain
ASTM D 1621
217 473 647 484 538 304
Modulus, psi 9250 19700 26200 20100 21800 14146
Thermo-Lite Board Series Versatile Tough Supreme Tough-Lite
0.75 Thickness
Standard sheet sizes up to 5 X 10
Standard sheet sizes up to: 5 X 12 5 X 10
Standard sheet sizes up to: 5 X 12 5 X 10
*Please see other side for more important product information.
Product Technical Data
Thermo-Lite Board
4 X 8
Thermo-Lite Board Series Versatile Tough Supreme Tough-Lite
4 X 8
Thermo-Lite Board is self
extinguishing (when heat source is
removed, the flame goes out.) The
material conforms to UL-94HB as
well as Federal Motor Vehicle Safety
Standard 302 for flammability. Eu-
ropean Standard FMVS: EC Type
Approval No. 95/28/EC
Thermal Resistance (R-Value) is
typically 1.2 for .50 , 2.2 for 1 ,
and 4 for 2 thicknesses.
Water Absorption ASTM D2842
Less than 1%.
Electric Safety Testing: Thermo-Lite
Board Versatile Series 3/4 have
passed ASTM D 149-09, Method A
testing up to 24,000 volts AC.
Distributed by SpaceAge Synthetics, Ltd. 2020
SpaceAge Synthetics, Ltd.
1402 39th Street NW
Fargo, ND 58102 USA
Tel: 701.277.5631
Fax: 701.277.5689
www.spaceagesynthetics.com
1 Thickness
Nominal Density lb/ft
3
20 24 30 26 26
Tensile Strength, psi ASTM D 1037 2040 2170 2350 3550 4170
Modulus, psi 112000 120000 132000 196000 241000
Flexure Strength, psi ASTM C 393 2570 2920 3440 3850 5500
Modulus, psi 187000 202000 224000 358000 455000
Compression Strength, psi
@2.5% Strain
ASTM D 1621
473 647 909 527 589
Modulus, psi 19700 26200 36100 21700 23700
1.50 Thickness
Thermo-Lite Board Series Versatile Tough Supreme
Nominal Density lb/ft
3
20 24 30 24 24
Tensile Strength, psi ASTM D 1037 2340 2470 2660 1670 1760
Modulus, psi 138000 146000 158000 135000 155000
Flexure Strength, psi ASTM C 393 2420 2770 3300 2930 4250
Modulus, psi 166000 180000 202000 260000 360000
Compression Strength, psi
@2.5% Strain
ASTM D 1621
473 647 909 484 553
Modulus, psi 19700 26200 36100 20100 22400
Nominal Density lb/ft
3
20 24 30
Tensile Strength, psi ASTM D 1037 2650 2780 2960
Modulus, psi 164000 172000 184000
Flexure Strength, psi ASTM C 393 2270 2620 3150
Modulus, psi 144000 159000 181000
Compression Strength, psi
@2.5% Strain
ASTM D 1621
473 647 909
Modulus, psi 19700 26200 36100
2 Thickness
Thermo-Lite Board Series Versatile
Standard sheet sizes up to 5 X 12 Standard sheet sizes up to 4 X 10
Standard sheet sizes up to 4 X 8 Standard sheet sizes up to 4 X 10
Standard sheet sizes up to 4 X 8
This updated and expanded technical data supersedes all previous documents used to represent the
mechanical properties of Thermo-Lite Board . In no way should this data be viewed or portrayed as
providing exact properties, nor should it be used as actual properties for design purposes. This data is
provided in good faith, and gives approximate values for the nominal density. The information contained
herein is believed to be correct and corresponds to the latest state of scientific and technical knowledge.
Additional testing provided upon request. Assessment of suitability is the responsibility of end user.
Page 2 of 2
Strength – the maximum load (lb) that can
be carried per unit area (in
2 ) of cross
section. One psi is equivalent to one pound
of force being applied to a strip of material
that has a one inch by one inch cross
section.
Modulus – the stress (lb/in
2 ) that would
have to be applied to theoretically stretch a
material to twice its original length. Modu-
lus can be viewed as the stiffness of the
material because, as modulus increas-
es, so does the stiffness.
Thermo-Lite Board Series Versatile Tough Supreme
Sanded Surfaces Thickness Side A Side B
0 +/- 0.060 E-skin or Natural E-Skin or Natural
1 +/- 0.040 E-skin or Natural Sanded
2 +/- 0.020 Sanded Sanded
*FASCOAT Boards are targeted to have an additional + 0.020″ tolerance to the pre-coated
panel tolerance. All boards: Density +/- 2lb/ft and Dimensional +/- (.0625) .
SpaceAge Synthetics Tolerances
The testing data outlined in this document is represented by a predictive model and is an estimation based on a curve fitting to available data.
Please speak with one of our knowledgeable Sales Representatives for further details.
by | Sep 27, 2025
ISO 9001:2008 Registered
Page 1 of 2
Standard sheet sizes up to 5 X 12
Nominal Density lb/ft
3
32 38 40
Tensile Strength, psi ASTM D 1037 1960 6660 8150
Modulus, psi 97100 311000 400000
Flexure Strength, psi ASTM C 393 3840 5380 7570
Modulus, psi 263000 512000 605000
Compression Strength, psi
@2.5% Strain
ASTM D 1621
866 658 742
Modulus, psi 26600 29500 34500
Thermo-Lite Board Series Versatile Tough Supreme
0.25 Thickness
Nominal Density lb/ft
3
15 20 24 28 28 20
Tensile Strength, psi ASTM D 1037 1230 1730 1860 5420 6570 3085
Modulus, psi 79625 86300 94200 256000 327000 196330
Flexure Strength, psi ASTM C 393 1482 2720 3070 4780 6760 3584
Modulus, psi 127123 208000 223000 456000 550000 380065
Compression Strength, psi
@2.5% Strain
ASTM D 1621
240 473 647 484 523 296
Modulus, psi 9756 19700 26200 20100 21300 12161
0.50 Thickness
Nominal Density lb/ft
3
13 20 24 26 26 18
Tensile Strength, psi ASTM D 1037 1107 1890 2010 4450 5330 2038
Modulus, psi 67211 99300 107000 223000 281000 112968
Flexure Strength, psi ASTM C 393 1691 2640 2990 4300 6110 2757
Modulus, psi 159063 198000 212000 407000 502000 280106
Compression Strength, psi
@2.5% Strain
ASTM D 1621
217 473 647 484 538 304
Modulus, psi 9250 19700 26200 20100 21800 14146
Thermo-Lite Board Series Versatile Tough Supreme Tough-Lite
0.75 Thickness
Standard sheet sizes up to 5 X 10
Standard sheet sizes up to: 5 X 12 5 X 10
Standard sheet sizes up to: 5 X 12 5 X 10
*Please see other side for more important product information.
Product Technical Data
Thermo-Lite Board
4 X 8
Thermo-Lite Board Series Versatile Tough Supreme Tough-Lite
4 X 8
Thermo-Lite Board is self
extinguishing (when heat source is
removed, the flame goes out.) The
material conforms to UL-94HB as
well as Federal Motor Vehicle Safety
Standard 302 for flammability. Eu-
ropean Standard FMVS: EC Type
Approval No. 95/28/EC
Thermal Resistance (R-Value) is
typically 1.2 for .50 , 2.2 for 1 ,
and 4 for 2 thicknesses.
Water Absorption ASTM D2842
Less than 1%.
Electric Safety Testing: Thermo-Lite
Board Versatile Series 3/4 have
passed ASTM D 149-09, Method A
testing up to 24,000 volts AC.
Distributed by SpaceAge Synthetics, Ltd. 2018
SpaceAge Synthetics, Ltd.
1402 39th Street NW
Fargo, ND 58102 USA
Tel: 701.277.5631
Fax: 701.277.5689
www.spaceagesynthetics.com
1 Thickness
Nominal Density lb/ft
3
20 24 30 26 26
Tensile Strength, psi ASTM D 1037 2040 2170 2350 3550 4170
Modulus, psi 112000 120000 132000 196000 241000
Flexure Strength, psi ASTM C 393 2570 2920 3440 3850 5500
Modulus, psi 187000 202000 224000 358000 455000
Compression Strength, psi
@2.5% Strain
ASTM D 1621
473 647 909 527 589
Modulus, psi 19700 26200 36100 21700 23700
1.50 Thickness
Thermo-Lite Board Series Versatile Tough Supreme
Nominal Density lb/ft
3
20 24 30 24 24
Tensile Strength, psi ASTM D 1037 2340 2470 2660 1670 1760
Modulus, psi 138000 146000 158000 135000 155000
Flexure Strength, psi ASTM C 393 2420 2770 3300 2930 4250
Modulus, psi 166000 180000 202000 260000 360000
Compression Strength, psi
@2.5% Strain
ASTM D 1621
473 647 909 484 553
Modulus, psi 19700 26200 36100 20100 22400
Nominal Density lb/ft
3
20 24 30
Tensile Strength, psi ASTM D 1037 2650 2780 2960
Modulus, psi 164000 172000 184000
Flexure Strength, psi ASTM C 393 2270 2620 3150
Modulus, psi 144000 159000 181000
Compression Strength, psi
@2.5% Strain
ASTM D 1621
473 647 909
Modulus, psi 19700 26200 36100
2 Thickness
Thermo-Lite Board Series Versatile
Standard sheet sizes up to 5 X 12 Standard sheet sizes up to 4 X 10
Standard sheet sizes up to 4 X 8 Standard sheet sizes up to 4 X 10
Standard sheet sizes up to 4 X 8
This updated and expanded technical data supersedes all previous documents used to represent the
mechanical properties of Thermo-Lite Board . In no way should this data be viewed or portrayed as
providing exact properties, nor should it be used as actual properties for design purposes. This data is
provided in good faith, and gives approximate values for the nominal density. The information contained
herein is believed to be correct and corresponds to the latest state of scientific and technical knowledge.
Additional testing provided upon request. Assessment of suitability is the responsibility of end user.
Page 2 of 2
Strength – the maximum load (lb) that can
be carried per unit area (in
2 ) of cross
section. One psi is equivalent to one pound
of force being applied to a strip of material
that has a one inch by one inch cross
section.
Modulus – the stress (lb/in
2 ) that would
have to be applied to theoretically stretch a
material to twice its original length. Modu-
lus can be viewed as the stiffness of the
material because, as modulus increas-
es, so does the stiffness.
Thermo-Lite Board Series Versatile Tough Supreme
Sanded Surfaces Thickness Side A Side B
0 +/- 0.060 E-skin or Natural E-Skin or Natural
1 +/- 0.040 E-skin or Natural Sanded
2 +/- 0.020 Sanded Sanded
*FASCOAT Boards are targeted to have an additional + 0.020″ tolerance to the pre-coated
panel tolerance. All boards: Density +/- 2lb/ft and Dimensional +/- (.0625) .
SpaceAge Synthetics Tolerances
The testing data outlined in this document is represented by a predictive model and is an estimation based on a curve fitting to available data.
Please speak with one of our knowledgeable Sales Representatives for further details.
by | Sep 27, 2025
I Core Composites, LLC
802 23
rd Street SW, PO Box 1675, Cullman, AL 35056 1675 USA
Ph (256) 739 6627 / Fax (256) 739 4334 / www.ICoreComposites.com
EG Balsa PRODUCTS are engineered end-grain balsa panels, which exhibit superior mechanical
properties and offer exceptional value compared to other core materials. Produced in the United
States, each high quality panel is manufactured to precision thickness with a natural or ARMOR
coated surface. Panels are available in a range of densities for all molding applications to include
open molding, vacuum bagging, resin infusion, RTM and numerous others.
Available 3/16 (4.75mm) to 4 + (101.6mm)
Special / Precision thicknesses available
Panels size: 24 x 48 , square within 1/16
Variety of standard & special densities
Rigid or contourable panels
Knife cut technology on contourable
products
Available with grooves and/or perforations
Contourable products utilize PlyScrim 100
TM
o Securely bonded to the balsa
o Open web pattern allows for
increased laminate bonding surface
Products are vacuum packed in plastic bags
and heat sealed for maximum protection.
ARMOR is a proprietary coating applied to the
surface of all EG Balsa products. ARMOR is
environmentally friendly and does not
degrade.
Benefits of ARMOR Coating:
Product identifier green color helps identify the
balsa as ARMOR coated.
Inhibits the growth of bacteria, mold & fungi.
Reduces resin uptake
Compatible with virtually all resin systems
Achieves excellent laminate bond strength
Unit Lite Grade Ultra
Nominal
Density
ASTM C271 lb/ft
3
7 10 15
Shear
Strength
ASTM C273 psi 260 433 680
Shear
Modulus
ASTM C365 psi 13,800 24,800 43,500
Compressive
Strength
ASTM C365 psi 1,100 1,940 3,340
Tensile
Strength
ASTM C297 psi 914 2,000 3,020
The reported data, derived from laboratory testing, shall not be taken as minimum guaranteed values. They refer to the nominal density. They are believed to be correct. No warranty
is made on the basis of these data. Customers should verify the data needed for the specific application, performing the necessary tests
on the product. No warranty is released for
any particular application. I Core Composites, LLC may update this document without notice.
by | Sep 27, 2025
ISO 9001:2008 Registered
Page 1 of 2
Standard sheet sizes up to 5 X 12
Nominal Density lb/ft
3
32 38 40
Tensile Strength, psi ASTM D 1037 1960 6660 8150
Modulus, psi 97100 311000 400000
Flexure Strength, psi ASTM C 393 3840 5380 7570
Modulus, psi 263000 512000 605000
Compression Strength, psi
@2.5% Strain
ASTM D 1621
866 658 742
Modulus, psi 26600 29500 34500
Thermo-Lite Board Series Versatile Tough Supreme
0.25 Thickness
Nominal Density lb/ft
3
15 20 24 28 28 20
Tensile Strength, psi ASTM D 1037 1230 1730 1860 5420 6570 3085
Modulus, psi 79625 86300 94200 256000 327000 196330
Flexure Strength, psi ASTM C 393 1482 2720 3070 4780 6760 3584
Modulus, psi 127123 208000 223000 456000 550000 380065
Compression Strength, psi
@2.5% Strain
ASTM D 1621
240 473 647 484 523 296
Modulus, psi 9756 19700 26200 20100 21300 12161
0.50 Thickness
Nominal Density lb/ft
3
13 20 24 26 26 18
Tensile Strength, psi ASTM D 1037 1107 1890 2010 4450 5330 2038
Modulus, psi 67211 99300 107000 223000 281000 112968
Flexure Strength, psi ASTM C 393 1691 2640 2990 4300 6110 2757
Modulus, psi 159063 198000 212000 407000 502000 280106
Compression Strength, psi
@2.5% Strain
ASTM D 1621
217 473 647 484 538 304
Modulus, psi 9250 19700 26200 20100 21800 14146
Thermo-Lite Board Series Versatile Tough Supreme Tough-Lite
0.75 Thickness
Standard sheet sizes up to 5 X 10
Standard sheet sizes up to: 5 X 12 5 X 10
Standard sheet sizes up to: 5 X 12 5 X 10
*Please see other side for more important product information.
Product Technical Data
Thermo-Lite Board
4 X 8
Thermo-Lite Board Series Versatile Tough Supreme Tough-Lite
4 X 8
Thermo-Lite Board is self
extinguishing (when heat source is
removed, the flame goes out.) The
material conforms to UL-94HB as
well as Federal Motor Vehicle Safety
Standard 302 for flammability. Eu-
ropean Standard FMVS: EC Type
Approval No. 95/28/EC
Thermal Resistance (R-Value) is
typically 1.2 for .50 , 2.2 for 1 ,
and 4 for 2 thicknesses.
Water Absorption ASTM D2842
Less than 1%.
Electric Safety Testing: Thermo-Lite
Board Versatile Series 3/4 have
passed ASTM D 149-09, Method A
testing up to 24,000 volts AC.
Distributed by SpaceAge Synthetics, Ltd. 2018
SpaceAge Synthetics, Ltd.
1402 39th Street NW
Fargo, ND 58102 USA
Tel: 701.277.5631
Fax: 701.277.5689
www.spaceagesynthetics.com
1 Thickness
Nominal Density lb/ft
3
20 24 30 26 26
Tensile Strength, psi ASTM D 1037 2040 2170 2350 3550 4170
Modulus, psi 112000 120000 132000 196000 241000
Flexure Strength, psi ASTM C 393 2570 2920 3440 3850 5500
Modulus, psi 187000 202000 224000 358000 455000
Compression Strength, psi
@2.5% Strain
ASTM D 1621
473 647 909 527 589
Modulus, psi 19700 26200 36100 21700 23700
1.50 Thickness
Thermo-Lite Board Series Versatile Tough Supreme
Nominal Density lb/ft
3
20 24 30 24 24
Tensile Strength, psi ASTM D 1037 2340 2470 2660 1670 1760
Modulus, psi 138000 146000 158000 135000 155000
Flexure Strength, psi ASTM C 393 2420 2770 3300 2930 4250
Modulus, psi 166000 180000 202000 260000 360000
Compression Strength, psi
@2.5% Strain
ASTM D 1621
473 647 909 484 553
Modulus, psi 19700 26200 36100 20100 22400
Nominal Density lb/ft
3
20 24 30
Tensile Strength, psi ASTM D 1037 2650 2780 2960
Modulus, psi 164000 172000 184000
Flexure Strength, psi ASTM C 393 2270 2620 3150
Modulus, psi 144000 159000 181000
Compression Strength, psi
@2.5% Strain
ASTM D 1621
473 647 909
Modulus, psi 19700 26200 36100
2 Thickness
Thermo-Lite Board Series Versatile
Standard sheet sizes up to 5 X 12 Standard sheet sizes up to 4 X 10
Standard sheet sizes up to 4 X 8 Standard sheet sizes up to 4 X 10
Standard sheet sizes up to 4 X 8
This updated and expanded technical data supersedes all previous documents used to represent the
mechanical properties of Thermo-Lite Board . In no way should this data be viewed or portrayed as
providing exact properties, nor should it be used as actual properties for design purposes. This data is
provided in good faith, and gives approximate values for the nominal density. The information contained
herein is believed to be correct and corresponds to the latest state of scientific and technical knowledge.
Additional testing provided upon request. Assessment of suitability is the responsibility of end user.
Page 2 of 2
Strength – the maximum load (lb) that can
be carried per unit area (in
2 ) of cross
section. One psi is equivalent to one pound
of force being applied to a strip of material
that has a one inch by one inch cross
section.
Modulus – the stress (lb/in
2 ) that would
have to be applied to theoretically stretch a
material to twice its original length. Modu-
lus can be viewed as the stiffness of the
material because, as modulus increas-
es, so does the stiffness.
Thermo-Lite Board Series Versatile Tough Supreme
Sanded Surfaces Thickness Side A Side B
0 +/- 0.060 E-skin or Natural E-Skin or Natural
1 +/- 0.040 E-skin or Natural Sanded
2 +/- 0.020 Sanded Sanded
*FASCOAT Boards are targeted to have an additional + 0.020″ tolerance to the pre-coated
panel tolerance. All boards: Density +/- 2lb/ft and Dimensional +/- (.0625) .
SpaceAge Synthetics Tolerances
The testing data outlined in this document is represented by a predictive model and is an estimation based on a curve fitting to available data.
Please speak with one of our knowledgeable Sales Representatives for further details.
by | Sep 27, 2025
ISO 9001:2008 Registered
Page 1 of 2
Standard sheet sizes up to 5 X 12
Nominal Density lb/ft
3
32 38 40
Tensile Strength, psi ASTM D 1037 1960 6660 8150
Modulus, psi 97100 311000 400000
Flexure Strength, psi ASTM C 393 3840 5380 7570
Modulus, psi 263000 512000 605000
Compression Strength, psi
@2.5% Strain
ASTM D 1621
866 658 742
Modulus, psi 26600 29500 34500
Thermo-Lite Board Series Versatile Tough Supreme
0.25 Thickness
Nominal Density lb/ft
3
15 20 24 28 28 20
Tensile Strength, psi ASTM D 1037 1230 1730 1860 5420 6570 3085
Modulus, psi 79625 86300 94200 256000 327000 196330
Flexure Strength, psi ASTM C 393 1482 2720 3070 4780 6760 3584
Modulus, psi 127123 208000 223000 456000 550000 380065
Compression Strength, psi
@2.5% Strain
ASTM D 1621
240 473 647 484 523 296
Modulus, psi 9756 19700 26200 20100 21300 12161
0.50 Thickness
Nominal Density lb/ft
3
13 20 24 26 26 18
Tensile Strength, psi ASTM D 1037 1107 1890 2010 4450 5330 2038
Modulus, psi 67211 99300 107000 223000 281000 112968
Flexure Strength, psi ASTM C 393 1691 2640 2990 4300 6110 2757
Modulus, psi 159063 198000 212000 407000 502000 280106
Compression Strength, psi
@2.5% Strain
ASTM D 1621
217 473 647 484 538 304
Modulus, psi 9250 19700 26200 20100 21800 14146
Thermo-Lite Board Series Versatile Tough Supreme Tough-Lite
0.75 Thickness
Standard sheet sizes up to 5 X 10
Standard sheet sizes up to: 5 X 12 5 X 10
Standard sheet sizes up to: 5 X 12 5 X 10
*Please see other side for more important product information.
Product Technical Data
Thermo-Lite Board
4 X 8
Thermo-Lite Board Series Versatile Tough Supreme Tough-Lite
4 X 8
Thermo-Lite Board is self
extinguishing (when heat source is
removed, the flame goes out.) The
material conforms to UL-94HB as
well as Federal Motor Vehicle Safety
Standard 302 for flammability. Eu-
ropean Standard FMVS: EC Type
Approval No. 95/28/EC
Thermal Resistance (R-Value) is
typically 1.2 for .50 , 2.2 for 1 ,
and 4 for 2 thicknesses.
Water Absorption ASTM D2842
Less than 1%.
Electric Safety Testing: Thermo-Lite
Board Versatile Series 3/4 have
passed ASTM D 149-09, Method A
testing up to 24,000 volts AC.
Distributed by SpaceAge Synthetics, Ltd. 2018
SpaceAge Synthetics, Ltd.
1402 39th Street NW
Fargo, ND 58102 USA
Tel: 701.277.5631
Fax: 701.277.5689
www.spaceagesynthetics.com
1 Thickness
Nominal Density lb/ft
3
20 24 30 26 26
Tensile Strength, psi ASTM D 1037 2040 2170 2350 3550 4170
Modulus, psi 112000 120000 132000 196000 241000
Flexure Strength, psi ASTM C 393 2570 2920 3440 3850 5500
Modulus, psi 187000 202000 224000 358000 455000
Compression Strength, psi
@2.5% Strain
ASTM D 1621
473 647 909 527 589
Modulus, psi 19700 26200 36100 21700 23700
1.50 Thickness
Thermo-Lite Board Series Versatile Tough Supreme
Nominal Density lb/ft
3
20 24 30 24 24
Tensile Strength, psi ASTM D 1037 2340 2470 2660 1670 1760
Modulus, psi 138000 146000 158000 135000 155000
Flexure Strength, psi ASTM C 393 2420 2770 3300 2930 4250
Modulus, psi 166000 180000 202000 260000 360000
Compression Strength, psi
@2.5% Strain
ASTM D 1621
473 647 909 484 553
Modulus, psi 19700 26200 36100 20100 22400
Nominal Density lb/ft
3
20 24 30
Tensile Strength, psi ASTM D 1037 2650 2780 2960
Modulus, psi 164000 172000 184000
Flexure Strength, psi ASTM C 393 2270 2620 3150
Modulus, psi 144000 159000 181000
Compression Strength, psi
@2.5% Strain
ASTM D 1621
473 647 909
Modulus, psi 19700 26200 36100
2 Thickness
Thermo-Lite Board Series Versatile
Standard sheet sizes up to 5 X 12 Standard sheet sizes up to 4 X 10
Standard sheet sizes up to 4 X 8 Standard sheet sizes up to 4 X 10
Standard sheet sizes up to 4 X 8
This updated and expanded technical data supersedes all previous documents used to represent the
mechanical properties of Thermo-Lite Board . In no way should this data be viewed or portrayed as
providing exact properties, nor should it be used as actual properties for design purposes. This data is
provided in good faith, and gives approximate values for the nominal density. The information contained
herein is believed to be correct and corresponds to the latest state of scientific and technical knowledge.
Additional testing provided upon request. Assessment of suitability is the responsibility of end user.
Page 2 of 2
Strength – the maximum load (lb) that can
be carried per unit area (in
2 ) of cross
section. One psi is equivalent to one pound
of force being applied to a strip of material
that has a one inch by one inch cross
section.
Modulus – the stress (lb/in
2 ) that would
have to be applied to theoretically stretch a
material to twice its original length. Modu-
lus can be viewed as the stiffness of the
material because, as modulus increas-
es, so does the stiffness.
Thermo-Lite Board Series Versatile Tough Supreme
Sanded Surfaces Thickness Side A Side B
0 +/- 0.060 E-skin or Natural E-Skin or Natural
1 +/- 0.040 E-skin or Natural Sanded
2 +/- 0.020 Sanded Sanded
*FASCOAT Boards are targeted to have an additional + 0.020″ tolerance to the pre-coated
panel tolerance. All boards: Density +/- 2lb/ft and Dimensional +/- (.0625) .
SpaceAge Synthetics Tolerances
The testing data outlined in this document is represented by a predictive model and is an estimation based on a curve fitting to available data.
Please speak with one of our knowledgeable Sales Representatives for further details.
by | Sep 27, 2025
ISO 9001:2008 Registered
Page 1 of 2
Standard sheet sizes up to 5 X 12
Nominal Density lb/ft
3
32 38 40
Tensile Strength, psi ASTM D 1037 1960 6660 8150
Modulus, psi 97100 311000 400000
Flexure Strength, psi ASTM C 393 3840 5380 7570
Modulus, psi 263000 512000 605000
Compression Strength, psi
@2.5% Strain
ASTM D 1621
866 658 742
Modulus, psi 26600 29500 34500
Thermo-Lite Board Series Versatile Tough Supreme
0.25 Thickness
Nominal Density lb/ft
3
15 20 24 28 28 20
Tensile Strength, psi ASTM D 1037 1230 1730 1860 5420 6570 3085
Modulus, psi 79625 86300 94200 256000 327000 196330
Flexure Strength, psi ASTM C 393 1482 2720 3070 4780 6760 3584
Modulus, psi 127123 208000 223000 456000 550000 380065
Compression Strength, psi
@2.5% Strain
ASTM D 1621
240 473 647 484 523 296
Modulus, psi 9756 19700 26200 20100 21300 12161
0.50 Thickness
Nominal Density lb/ft
3
13 20 24 26 26 18
Tensile Strength, psi ASTM D 1037 1107 1890 2010 4450 5330 2038
Modulus, psi 67211 99300 107000 223000 281000 112968
Flexure Strength, psi ASTM C 393 1691 2640 2990 4300 6110 2757
Modulus, psi 159063 198000 212000 407000 502000 280106
Compression Strength, psi
@2.5% Strain
ASTM D 1621
217 473 647 484 538 304
Modulus, psi 9250 19700 26200 20100 21800 14146
Thermo-Lite Board Series Versatile Tough Supreme Tough-Lite
0.75 Thickness
Standard sheet sizes up to 5 X 10
Standard sheet sizes up to: 5 X 12 5 X 10
Standard sheet sizes up to: 5 X 12 5 X 10
*Please see other side for more important product information.
Product Technical Data
Thermo-Lite Board
4 X 8
Thermo-Lite Board Series Versatile Tough Supreme Tough-Lite
4 X 8
Thermo-Lite Board is self
extinguishing (when heat source is
removed, the flame goes out.) The
material conforms to UL-94HB as
well as Federal Motor Vehicle Safety
Standard 302 for flammability. Eu-
ropean Standard FMVS: EC Type
Approval No. 95/28/EC
Thermal Resistance (R-Value) is
typically 1.2 for .50 , 2.2 for 1 ,
and 4 for 2 thicknesses.
Water Absorption ASTM D2842
Less than 1%.
Electric Safety Testing: Thermo-Lite
Board Versatile Series 3/4 have
passed ASTM D 149-09, Method A
testing up to 24,000 volts AC.
Distributed by SpaceAge Synthetics, Ltd. 2018
SpaceAge Synthetics, Ltd.
1402 39th Street NW
Fargo, ND 58102 USA
Tel: 701.277.5631
Fax: 701.277.5689
www.spaceagesynthetics.com
1 Thickness
Nominal Density lb/ft
3
20 24 30 26 26
Tensile Strength, psi ASTM D 1037 2040 2170 2350 3550 4170
Modulus, psi 112000 120000 132000 196000 241000
Flexure Strength, psi ASTM C 393 2570 2920 3440 3850 5500
Modulus, psi 187000 202000 224000 358000 455000
Compression Strength, psi
@2.5% Strain
ASTM D 1621
473 647 909 527 589
Modulus, psi 19700 26200 36100 21700 23700
1.50 Thickness
Thermo-Lite Board Series Versatile Tough Supreme
Nominal Density lb/ft
3
20 24 30 24 24
Tensile Strength, psi ASTM D 1037 2340 2470 2660 1670 1760
Modulus, psi 138000 146000 158000 135000 155000
Flexure Strength, psi ASTM C 393 2420 2770 3300 2930 4250
Modulus, psi 166000 180000 202000 260000 360000
Compression Strength, psi
@2.5% Strain
ASTM D 1621
473 647 909 484 553
Modulus, psi 19700 26200 36100 20100 22400
Nominal Density lb/ft
3
20 24 30
Tensile Strength, psi ASTM D 1037 2650 2780 2960
Modulus, psi 164000 172000 184000
Flexure Strength, psi ASTM C 393 2270 2620 3150
Modulus, psi 144000 159000 181000
Compression Strength, psi
@2.5% Strain
ASTM D 1621
473 647 909
Modulus, psi 19700 26200 36100
2 Thickness
Thermo-Lite Board Series Versatile
Standard sheet sizes up to 5 X 12 Standard sheet sizes up to 4 X 10
Standard sheet sizes up to 4 X 8 Standard sheet sizes up to 4 X 10
Standard sheet sizes up to 4 X 8
This updated and expanded technical data supersedes all previous documents used to represent the
mechanical properties of Thermo-Lite Board . In no way should this data be viewed or portrayed as
providing exact properties, nor should it be used as actual properties for design purposes. This data is
provided in good faith, and gives approximate values for the nominal density. The information contained
herein is believed to be correct and corresponds to the latest state of scientific and technical knowledge.
Additional testing provided upon request. Assessment of suitability is the responsibility of end user.
Page 2 of 2
Strength – the maximum load (lb) that can
be carried per unit area (in
2 ) of cross
section. One psi is equivalent to one pound
of force being applied to a strip of material
that has a one inch by one inch cross
section.
Modulus – the stress (lb/in
2 ) that would
have to be applied to theoretically stretch a
material to twice its original length. Modu-
lus can be viewed as the stiffness of the
material because, as modulus increas-
es, so does the stiffness.
Thermo-Lite Board Series Versatile Tough Supreme
Sanded Surfaces Thickness Side A Side B
0 +/- 0.060 E-skin or Natural E-Skin or Natural
1 +/- 0.040 E-skin or Natural Sanded
2 +/- 0.020 Sanded Sanded
*FASCOAT Boards are targeted to have an additional + 0.020″ tolerance to the pre-coated
panel tolerance. All boards: Density +/- 2lb/ft and Dimensional +/- (.0625) .
SpaceAge Synthetics Tolerances
The testing data outlined in this document is represented by a predictive model and is an estimation based on a curve fitting to available data.
Please speak with one of our knowledgeable Sales Representatives for further details.
by | Sep 27, 2025
ISO 9001:2008 Registered
Page 1 of 2
Standard sheet sizes up to 5 X 12
Nominal Density lb/ft
3
32 38 40
Tensile Strength, psi ASTM D 1037 1960 6660 8150
Modulus, psi 97100 311000 400000
Flexure Strength, psi ASTM C 393 3840 5380 7570
Modulus, psi 263000 512000 605000
Compression Strength, psi
@2.5% Strain
ASTM D 1621
866 658 742
Modulus, psi 26600 29500 34500
Thermo-Lite Board Series Versatile Tough Supreme
0.25 Thickness
Nominal Density lb/ft
3
15 20 24 28 28 20
Tensile Strength, psi ASTM D 1037 1230 1730 1860 5420 6570 3085
Modulus, psi 79625 86300 94200 256000 327000 196330
Flexure Strength, psi ASTM C 393 1482 2720 3070 4780 6760 3584
Modulus, psi 127123 208000 223000 456000 550000 380065
Compression Strength, psi
@2.5% Strain
ASTM D 1621
240 473 647 484 523 296
Modulus, psi 9756 19700 26200 20100 21300 12161
0.50 Thickness
Nominal Density lb/ft
3
13 20 24 26 26 18
Tensile Strength, psi ASTM D 1037 1107 1890 2010 4450 5330 2038
Modulus, psi 67211 99300 107000 223000 281000 112968
Flexure Strength, psi ASTM C 393 1691 2640 2990 4300 6110 2757
Modulus, psi 159063 198000 212000 407000 502000 280106
Compression Strength, psi
@2.5% Strain
ASTM D 1621
217 473 647 484 538 304
Modulus, psi 9250 19700 26200 20100 21800 14146
Thermo-Lite Board Series Versatile Tough Supreme Tough-Lite
0.75 Thickness
Standard sheet sizes up to 5 X 10
Standard sheet sizes up to: 5 X 12 5 X 10
Standard sheet sizes up to: 5 X 12 5 X 10
*Please see other side for more important product information.
Product Technical Data
Thermo-Lite Board
4 X 8
Thermo-Lite Board Series Versatile Tough Supreme Tough-Lite
4 X 8
Thermo-Lite Board is self
extinguishing (when heat source is
removed, the flame goes out.) The
material conforms to UL-94HB as
well as Federal Motor Vehicle Safety
Standard 302 for flammability. Eu-
ropean Standard FMVS: EC Type
Approval No. 95/28/EC
Thermal Resistance (R-Value) is
typically 1.2 for .50 , 2.2 for 1 ,
and 4 for 2 thicknesses.
Water Absorption ASTM D2842
Less than 1%.
Electric Safety Testing: Thermo-Lite
Board Versatile Series 3/4 have
passed ASTM D 149-09, Method A
testing up to 24,000 volts AC.
Distributed by SpaceAge Synthetics, Ltd. 2018
SpaceAge Synthetics, Ltd.
1402 39th Street NW
Fargo, ND 58102 USA
Tel: 701.277.5631
Fax: 701.277.5689
www.spaceagesynthetics.com
1 Thickness
Nominal Density lb/ft
3
20 24 30 26 26
Tensile Strength, psi ASTM D 1037 2040 2170 2350 3550 4170
Modulus, psi 112000 120000 132000 196000 241000
Flexure Strength, psi ASTM C 393 2570 2920 3440 3850 5500
Modulus, psi 187000 202000 224000 358000 455000
Compression Strength, psi
@2.5% Strain
ASTM D 1621
473 647 909 527 589
Modulus, psi 19700 26200 36100 21700 23700
1.50 Thickness
Thermo-Lite Board Series Versatile Tough Supreme
Nominal Density lb/ft
3
20 24 30 24 24
Tensile Strength, psi ASTM D 1037 2340 2470 2660 1670 1760
Modulus, psi 138000 146000 158000 135000 155000
Flexure Strength, psi ASTM C 393 2420 2770 3300 2930 4250
Modulus, psi 166000 180000 202000 260000 360000
Compression Strength, psi
@2.5% Strain
ASTM D 1621
473 647 909 484 553
Modulus, psi 19700 26200 36100 20100 22400
Nominal Density lb/ft
3
20 24 30
Tensile Strength, psi ASTM D 1037 2650 2780 2960
Modulus, psi 164000 172000 184000
Flexure Strength, psi ASTM C 393 2270 2620 3150
Modulus, psi 144000 159000 181000
Compression Strength, psi
@2.5% Strain
ASTM D 1621
473 647 909
Modulus, psi 19700 26200 36100
2 Thickness
Thermo-Lite Board Series Versatile
Standard sheet sizes up to 5 X 12 Standard sheet sizes up to 4 X 10
Standard sheet sizes up to 4 X 8 Standard sheet sizes up to 4 X 10
Standard sheet sizes up to 4 X 8
This updated and expanded technical data supersedes all previous documents used to represent the
mechanical properties of Thermo-Lite Board . In no way should this data be viewed or portrayed as
providing exact properties, nor should it be used as actual properties for design purposes. This data is
provided in good faith, and gives approximate values for the nominal density. The information contained
herein is believed to be correct and corresponds to the latest state of scientific and technical knowledge.
Additional testing provided upon request. Assessment of suitability is the responsibility of end user.
Page 2 of 2
Strength – the maximum load (lb) that can
be carried per unit area (in
2 ) of cross
section. One psi is equivalent to one pound
of force being applied to a strip of material
that has a one inch by one inch cross
section.
Modulus – the stress (lb/in
2 ) that would
have to be applied to theoretically stretch a
material to twice its original length. Modu-
lus can be viewed as the stiffness of the
material because, as modulus increas-
es, so does the stiffness.
Thermo-Lite Board Series Versatile Tough Supreme
Sanded Surfaces Thickness Side A Side B
0 +/- 0.060 E-skin or Natural E-Skin or Natural
1 +/- 0.040 E-skin or Natural Sanded
2 +/- 0.020 Sanded Sanded
*FASCOAT Boards are targeted to have an additional + 0.020″ tolerance to the pre-coated
panel tolerance. All boards: Density +/- 2lb/ft and Dimensional +/- (.0625) .
SpaceAge Synthetics Tolerances
The testing data outlined in this document is represented by a predictive model and is an estimation based on a curve fitting to available data.
Please speak with one of our knowledgeable Sales Representatives for further details.
by | Sep 27, 2025
PRIMEX PLASTICS CORPORATION
A subsidiary of ICC Industries Inc.
1235 NORTH F STREET RICHMOND, INDIANA 47374
765-966-7774 800-222-5116 FACSIMILE 765-935-1083
PRIME PETG 5500
UTILITY
TECHNICAL DATA SHEET
Properties
ASTM
Units
Typical
Value
Specific Gravity D-1505 g/cc 1.27
Tensile Strength @ Yield D-638 psi 7,300 – 7,700
Elongation @ Break D-638 % 50 – 110
Flexural Modulus D-790 psi 300,000 – 310,000
Rockwell Hardness D-785 R-Scale 106 – 115
Impact Strength, notched Izod
@ 73 F
D-256 ft-lb/in 1.7 1.9
Impact Strength, notched Izod
@ -22 F
D-256 ft-lb/in .5 – .7
CAUTION: Values listed are typical values for PETG as defined by Modern Plastics
World Encyclopedia 2000 . Utility materials used may or may not fall into the ranges
identified. Utility materials are likely to be inconsistent, both from batch to batch and
within individual batches. Utility materials cannot be certified to FDA, UL, RoHS, or
other similar specifications. Care should be used whenever selecting to use a utility
grade material. It is the responsibility of the end user to determine the acceptability of
material use for a particular application.
Note: These typical results are based on test procedures which are believed to be reliable. Due to variable conditions or methods of
processing, NO GUARANTEES OR WARRANTIES ARE EXPRESSED OR IMPLIED INCLUDING THE IMPLIED WARRANTY
OF MERCHANTABILITY AND FITNESS FOR A SPECIFIC PURPOSE, nor any recommendations made to infringe on any
patents.
MAV 01/03/06
by | Sep 27, 2025
PRIMEX PLASTICS CORPORATION
A subsidiary of ICC Industries Inc.
1235 NORTH F STREET RICHMOND, INDIANA 47374
765-966-7774 800-222-5116 FACSIMILE 765-935-1083
PRIME PETG 14471
COPOLYESTER
TECHNICAL DATA SHEET
Properties
ASTM
Units
Typical
Value
Specific Gravity D-1505 g/cc 1.27
Tensile Strength @ Yield D-638 psi 7,700
Elongation @ Break D-638 % 50
Flexural Modulus D-790 psi 310,000
Rockwell Hardness D-785 R-Scale 115
Impact Strength, notched Izod
@ 73 F
D-256 ft-lb/in 1.7
Impact Strength, notched Izod
@ -22 F
D-256 ft-lb/in .7
Heat Deflection Temperature
@ 264psi
D-648 F 157
Vicat Softening Point D-1525 F 181
Complies with UL 94-HB at thickness >.010
Complies with UL 94V-2 at thickness >.118
Complies with FDA Regulation 21 CFR 177.1315
Note: These typical results are based on test procedures which are believed to be reliable. Due to variable conditions or methods of
processing, NO GUARANTEES OR WARRANTIES ARE EXPRESSED OR IMPLIED INCLUDING THE IMPLIED WARRANTY
OF MERCHANTABILITY AND FITNESS FOR A SPECIFIC PURPOSE, nor any recommendations made to infringe on any
patents.
MAV 01/03/06
