by | Sep 27, 2025
Material Safety Guidance Sheet
Lantor Coremat
XM
Nonwoven Core Material Rev. Apr-20
The information contained in this document has been compiled in good faith by Lantor BV, but nevertheless no representation or
warranty is given as to the accuracy or completeness of the (technical) information provided herein. Lantor BV cannot be held liable of any
damages arising from any (printing) errors or omissions in this information. Lantor BV reserves the right to make changes with respect to
the information provided at any time without further notice Page 1 of 5
Lantor Lantor Coremat
XM is classified as non-hazardous according to
EC and OHSA regulations.
A safety datasheet is not required for non-hazardous articles.
The following document provides a Material Safety Guidance Sheet (MSGS) for nonwovens on a voluntary basis
according to EDANA recommendations (Guidelines/instructions relating to MSGS for nonwovens 10/GV8/422).
The MSGS is a means of transferring essential hazard information (including information on transport, handling,
storage and emergency actions) from the supplier of a nonwoven product to the recipient of the product.
As nonwovens are generally not hazardous, MSGS for nonwovens is not legally requested but must be
considered as information. It is inspired from the ECHA_2011_G_08-EN as recommendation for MSGS,
EC1907/2006.
Material Safety Guidance Sheet
Lantor Coremat
XM
Nonwoven Core Material Rev. Apr-20
The information contained in this document has been compiled in good faith by Lantor BV, but nevertheless no representation or
warranty is given as to the accuracy or completeness of the (technical) information provided herein. Lantor BV cannot be held liable of any
damages arising from any (printing) errors or omissions in this information. Lantor BV reserves the right to make changes with respect to
the information provided at any time without further notice Page 2 of 5
1. Identification of the product and the company
Identification of the product(s) Product Name: Coremat XM
Product Code: M55002; M55003; M55004; M55010
Intended use Liner and core material in FRP application
Company identification
Company name Lantor BV
Address P.O. Box 45, 3900 AA Veenendaal, The Netherlands
Contact +31 (0)318 537111; info@lantor.com
2. Hazards identification
Not hazardous under normal conditions according to EC and OHSA regulations.
Keep away from fire.
Accidental thermal decomposition or melting state can present hazards, see section 10
3. Composition / Information on ingredients
Identification of the type of nonwoven product.
Nonwoven Carded web, chemically bonded
Nature of the fibre(s) Polyester (PES)
Web surface treatment Cured acrylic binder
Binder Acrylic
Additives Acrylic copolymer encapsulating a blowing agent
Other major components None
Chemicals listed as dangerous
substances. None
The product does not contain any other chemicals (in relevant concentration) that are in the list of
dangerous substances.
Material Safety Guidance Sheet
Lantor Coremat
XM
Nonwoven Core Material Rev. Apr-20
The information contained in this document has been compiled in good faith by Lantor BV, but nevertheless no representation or
warranty is given as to the accuracy or completeness of the (technical) information provided herein. Lantor BV cannot be held liable of any
damages arising from any (printing) errors or omissions in this information. Lantor BV reserves the right to make changes with respect to
the information provided at any time without further notice Page 3 of 5
4. First aid measures
Under normal condition.
Inhalation No specific measure to be taken.
Skin contact No specific measure to be taken.
Eyes contact Flush with sufficient amount of water for at least 15
minutes. If irritation or other ill effects persist, get
medical help
Ingestion Unlikely. In case of ingestion, get medical help
5. Firefighting measures
Suitable extinguishing media Water(spray), water/foam, carbon dioxide or dry powder.
Extinguishing-media not to be used Water in case short-circuiting is the cause of the fire.
Special exposure hazard For flammable and toxic fumes as well as skin contact
with molten materials see section 10.
Special protective clothing for fire-fighter No special requirements.
6. Accidental release measures
Not Applicable
7. Handling and storage
Handling No Special requirements.
Protection against fire and explosion No special requirements.
Storage Keep Lantor Lantor Coremat
XM in the original
package. Store in a dry, cool and well ventilated area.
The temperature should be above 0 C but must not
exceed 30 C.
Recommended maximum storage duration is 2 years.
8. Exposure controls and personal protection
General measure of protection General room ventilation is recommended.
General protection No special requirements.
Material Safety Guidance Sheet
Lantor Coremat
XM
Nonwoven Core Material Rev. Apr-20
The information contained in this document has been compiled in good faith by Lantor BV, but nevertheless no representation or
warranty is given as to the accuracy or completeness of the (technical) information provided herein. Lantor BV cannot be held liable of any
damages arising from any (printing) errors or omissions in this information. Lantor BV reserves the right to make changes with respect to
the information provided at any time without further notice Page 4 of 5
9. Physical and chemical properties
Appearance Off-White with hexagonal pattern
Odour Neutral
pH Not Applicable
Boiling point/boiling range Not Applicable
Melting point/melting range 250 265 C (PES fibres)
Decomposition temperature 450 C
Flash point Not Applicable
Flammability Not easily flammable (see section 10)
Auto flammability (temperature) > 450 C
Explosive properties Not Applicable
Oxidizing properties Not Applicable
Vapor pressure Not Applicable
Relative density 0,050 – 0,080 (water, room temperature)
Water solubility Insoluble
Fat solubility Insoluble
Styrene solubility Fibre binder will dissolve in styrene
Partition coefficient octanol/water Not Applicable
Material Safety Guidance Sheet
Lantor Coremat
XM
Nonwoven Core Material Rev. Apr-20
The information contained in this document has been compiled in good faith by Lantor BV, but nevertheless no representation or
warranty is given as to the accuracy or completeness of the (technical) information provided herein. Lantor BV cannot be held liable of any
damages arising from any (printing) errors or omissions in this information. Lantor BV reserves the right to make changes with respect to
the information provided at any time without further notice Page 5 of 5
10. Stability and reactivity
The materials are chemically stable.
Under thermal decomposition flammable and toxic fumes can be generated. The generation of cleavage
and oxidation products is subject to fire conditions. Non burned residues and contaminated water after
firefighting should be disposed of in compliance with official regulations. Molten material should not be
allowed to be in contact with the skin to which it can cause burns.
11. Toxicological information
No toxic reaction known under normal conditions.
Note: Under decomposition conditions; toxic fumes and contaminated water, see section 10.
12. Ecological information
For transportation, storage, normal use, no toxicological effect known.
13. Disposal considerations
As non-hazardous solid waste, nonwovens can be disposed of, depending on local legislation, through
recycling, incineration or landfill.
14. Transport information
Not classified as hazardous for transport.
Keep the product dry during transportation.
In case of fire see sections 5 and 10
No further specific requirements.
15. Regulatory information
None.
16. Other information
None
by | Sep 27, 2025
Material Safety Guidance Sheet
Lantor Coremat
XM
Nonwoven Core Material Rev. Apr-20
The information contained in this document has been compiled in good faith by Lantor BV, but nevertheless no representation or
warranty is given as to the accuracy or completeness of the (technical) information provided herein. Lantor BV cannot be held liable of any
damages arising from any (printing) errors or omissions in this information. Lantor BV reserves the right to make changes with respect to
the information provided at any time without further notice Page 1 of 5
Lantor Lantor Coremat
XM is classified as non-hazardous according to
EC and OHSA regulations.
A safety datasheet is not required for non-hazardous articles.
The following document provides a Material Safety Guidance Sheet (MSGS) for nonwovens on a voluntary basis
according to EDANA recommendations (Guidelines/instructions relating to MSGS for nonwovens 10/GV8/422).
The MSGS is a means of transferring essential hazard information (including information on transport, handling,
storage and emergency actions) from the supplier of a nonwoven product to the recipient of the product.
As nonwovens are generally not hazardous, MSGS for nonwovens is not legally requested but must be
considered as information. It is inspired from the ECHA_2011_G_08-EN as recommendation for MSGS,
EC1907/2006.
Material Safety Guidance Sheet
Lantor Coremat
XM
Nonwoven Core Material Rev. Apr-20
The information contained in this document has been compiled in good faith by Lantor BV, but nevertheless no representation or
warranty is given as to the accuracy or completeness of the (technical) information provided herein. Lantor BV cannot be held liable of any
damages arising from any (printing) errors or omissions in this information. Lantor BV reserves the right to make changes with respect to
the information provided at any time without further notice Page 2 of 5
1. Identification of the product and the company
Identification of the product(s) Product Name: Coremat XM
Product Code: M55002; M55003; M55004; M55010
Intended use Liner and core material in FRP application
Company identification
Company name Lantor BV
Address P.O. Box 45, 3900 AA Veenendaal, The Netherlands
Contact +31 (0)318 537111; info@lantor.com
2. Hazards identification
Not hazardous under normal conditions according to EC and OHSA regulations.
Keep away from fire.
Accidental thermal decomposition or melting state can present hazards, see section 10
3. Composition / Information on ingredients
Identification of the type of nonwoven product.
Nonwoven Carded web, chemically bonded
Nature of the fibre(s) Polyester (PES)
Web surface treatment Cured acrylic binder
Binder Acrylic
Additives Acrylic copolymer encapsulating a blowing agent
Other major components None
Chemicals listed as dangerous
substances. None
The product does not contain any other chemicals (in relevant concentration) that are in the list of
dangerous substances.
Material Safety Guidance Sheet
Lantor Coremat
XM
Nonwoven Core Material Rev. Apr-20
The information contained in this document has been compiled in good faith by Lantor BV, but nevertheless no representation or
warranty is given as to the accuracy or completeness of the (technical) information provided herein. Lantor BV cannot be held liable of any
damages arising from any (printing) errors or omissions in this information. Lantor BV reserves the right to make changes with respect to
the information provided at any time without further notice Page 3 of 5
4. First aid measures
Under normal condition.
Inhalation No specific measure to be taken.
Skin contact No specific measure to be taken.
Eyes contact Flush with sufficient amount of water for at least 15
minutes. If irritation or other ill effects persist, get
medical help
Ingestion Unlikely. In case of ingestion, get medical help
5. Firefighting measures
Suitable extinguishing media Water(spray), water/foam, carbon dioxide or dry powder.
Extinguishing-media not to be used Water in case short-circuiting is the cause of the fire.
Special exposure hazard For flammable and toxic fumes as well as skin contact
with molten materials see section 10.
Special protective clothing for fire-fighter No special requirements.
6. Accidental release measures
Not Applicable
7. Handling and storage
Handling No Special requirements.
Protection against fire and explosion No special requirements.
Storage Keep Lantor Lantor Coremat
XM in the original
package. Store in a dry, cool and well ventilated area.
The temperature should be above 0 C but must not
exceed 30 C.
Recommended maximum storage duration is 2 years.
8. Exposure controls and personal protection
General measure of protection General room ventilation is recommended.
General protection No special requirements.
Material Safety Guidance Sheet
Lantor Coremat
XM
Nonwoven Core Material Rev. Apr-20
The information contained in this document has been compiled in good faith by Lantor BV, but nevertheless no representation or
warranty is given as to the accuracy or completeness of the (technical) information provided herein. Lantor BV cannot be held liable of any
damages arising from any (printing) errors or omissions in this information. Lantor BV reserves the right to make changes with respect to
the information provided at any time without further notice Page 4 of 5
9. Physical and chemical properties
Appearance Off-White with hexagonal pattern
Odour Neutral
pH Not Applicable
Boiling point/boiling range Not Applicable
Melting point/melting range 250 265 C (PES fibres)
Decomposition temperature 450 C
Flash point Not Applicable
Flammability Not easily flammable (see section 10)
Auto flammability (temperature) > 450 C
Explosive properties Not Applicable
Oxidizing properties Not Applicable
Vapor pressure Not Applicable
Relative density 0,050 – 0,080 (water, room temperature)
Water solubility Insoluble
Fat solubility Insoluble
Styrene solubility Fibre binder will dissolve in styrene
Partition coefficient octanol/water Not Applicable
Material Safety Guidance Sheet
Lantor Coremat
XM
Nonwoven Core Material Rev. Apr-20
The information contained in this document has been compiled in good faith by Lantor BV, but nevertheless no representation or
warranty is given as to the accuracy or completeness of the (technical) information provided herein. Lantor BV cannot be held liable of any
damages arising from any (printing) errors or omissions in this information. Lantor BV reserves the right to make changes with respect to
the information provided at any time without further notice Page 5 of 5
10. Stability and reactivity
The materials are chemically stable.
Under thermal decomposition flammable and toxic fumes can be generated. The generation of cleavage
and oxidation products is subject to fire conditions. Non burned residues and contaminated water after
firefighting should be disposed of in compliance with official regulations. Molten material should not be
allowed to be in contact with the skin to which it can cause burns.
11. Toxicological information
No toxic reaction known under normal conditions.
Note: Under decomposition conditions; toxic fumes and contaminated water, see section 10.
12. Ecological information
For transportation, storage, normal use, no toxicological effect known.
13. Disposal considerations
As non-hazardous solid waste, nonwovens can be disposed of, depending on local legislation, through
recycling, incineration or landfill.
14. Transport information
Not classified as hazardous for transport.
Keep the product dry during transportation.
In case of fire see sections 5 and 10
No further specific requirements.
15. Regulatory information
None.
16. Other information
None
by | Sep 27, 2025
Material Safety Guidance Sheet
Lantor Coremat
XM
Nonwoven Core Material Rev. Apr-20
The information contained in this document has been compiled in good faith by Lantor BV, but nevertheless no representation or
warranty is given as to the accuracy or completeness of the (technical) information provided herein. Lantor BV cannot be held liable of any
damages arising from any (printing) errors or omissions in this information. Lantor BV reserves the right to make changes with respect to
the information provided at any time without further notice Page 1 of 5
Lantor Lantor Coremat
XM is classified as non-hazardous according to
EC and OHSA regulations.
A safety datasheet is not required for non-hazardous articles.
The following document provides a Material Safety Guidance Sheet (MSGS) for nonwovens on a voluntary basis
according to EDANA recommendations (Guidelines/instructions relating to MSGS for nonwovens 10/GV8/422).
The MSGS is a means of transferring essential hazard information (including information on transport, handling,
storage and emergency actions) from the supplier of a nonwoven product to the recipient of the product.
As nonwovens are generally not hazardous, MSGS for nonwovens is not legally requested but must be
considered as information. It is inspired from the ECHA_2011_G_08-EN as recommendation for MSGS,
EC1907/2006.
Material Safety Guidance Sheet
Lantor Coremat
XM
Nonwoven Core Material Rev. Apr-20
The information contained in this document has been compiled in good faith by Lantor BV, but nevertheless no representation or
warranty is given as to the accuracy or completeness of the (technical) information provided herein. Lantor BV cannot be held liable of any
damages arising from any (printing) errors or omissions in this information. Lantor BV reserves the right to make changes with respect to
the information provided at any time without further notice Page 2 of 5
1. Identification of the product and the company
Identification of the product(s) Product Name: Coremat XM
Product Code: M55002; M55003; M55004; M55010
Intended use Liner and core material in FRP application
Company identification
Company name Lantor BV
Address P.O. Box 45, 3900 AA Veenendaal, The Netherlands
Contact +31 (0)318 537111; info@lantor.com
2. Hazards identification
Not hazardous under normal conditions according to EC and OHSA regulations.
Keep away from fire.
Accidental thermal decomposition or melting state can present hazards, see section 10
3. Composition / Information on ingredients
Identification of the type of nonwoven product.
Nonwoven Carded web, chemically bonded
Nature of the fibre(s) Polyester (PES)
Web surface treatment Cured acrylic binder
Binder Acrylic
Additives Acrylic copolymer encapsulating a blowing agent
Other major components None
Chemicals listed as dangerous
substances. None
The product does not contain any other chemicals (in relevant concentration) that are in the list of
dangerous substances.
Material Safety Guidance Sheet
Lantor Coremat
XM
Nonwoven Core Material Rev. Apr-20
The information contained in this document has been compiled in good faith by Lantor BV, but nevertheless no representation or
warranty is given as to the accuracy or completeness of the (technical) information provided herein. Lantor BV cannot be held liable of any
damages arising from any (printing) errors or omissions in this information. Lantor BV reserves the right to make changes with respect to
the information provided at any time without further notice Page 3 of 5
4. First aid measures
Under normal condition.
Inhalation No specific measure to be taken.
Skin contact No specific measure to be taken.
Eyes contact Flush with sufficient amount of water for at least 15
minutes. If irritation or other ill effects persist, get
medical help
Ingestion Unlikely. In case of ingestion, get medical help
5. Firefighting measures
Suitable extinguishing media Water(spray), water/foam, carbon dioxide or dry powder.
Extinguishing-media not to be used Water in case short-circuiting is the cause of the fire.
Special exposure hazard For flammable and toxic fumes as well as skin contact
with molten materials see section 10.
Special protective clothing for fire-fighter No special requirements.
6. Accidental release measures
Not Applicable
7. Handling and storage
Handling No Special requirements.
Protection against fire and explosion No special requirements.
Storage Keep Lantor Lantor Coremat
XM in the original
package. Store in a dry, cool and well ventilated area.
The temperature should be above 0 C but must not
exceed 30 C.
Recommended maximum storage duration is 2 years.
8. Exposure controls and personal protection
General measure of protection General room ventilation is recommended.
General protection No special requirements.
Material Safety Guidance Sheet
Lantor Coremat
XM
Nonwoven Core Material Rev. Apr-20
The information contained in this document has been compiled in good faith by Lantor BV, but nevertheless no representation or
warranty is given as to the accuracy or completeness of the (technical) information provided herein. Lantor BV cannot be held liable of any
damages arising from any (printing) errors or omissions in this information. Lantor BV reserves the right to make changes with respect to
the information provided at any time without further notice Page 4 of 5
9. Physical and chemical properties
Appearance Off-White with hexagonal pattern
Odour Neutral
pH Not Applicable
Boiling point/boiling range Not Applicable
Melting point/melting range 250 265 C (PES fibres)
Decomposition temperature 450 C
Flash point Not Applicable
Flammability Not easily flammable (see section 10)
Auto flammability (temperature) > 450 C
Explosive properties Not Applicable
Oxidizing properties Not Applicable
Vapor pressure Not Applicable
Relative density 0,050 – 0,080 (water, room temperature)
Water solubility Insoluble
Fat solubility Insoluble
Styrene solubility Fibre binder will dissolve in styrene
Partition coefficient octanol/water Not Applicable
Material Safety Guidance Sheet
Lantor Coremat
XM
Nonwoven Core Material Rev. Apr-20
The information contained in this document has been compiled in good faith by Lantor BV, but nevertheless no representation or
warranty is given as to the accuracy or completeness of the (technical) information provided herein. Lantor BV cannot be held liable of any
damages arising from any (printing) errors or omissions in this information. Lantor BV reserves the right to make changes with respect to
the information provided at any time without further notice Page 5 of 5
10. Stability and reactivity
The materials are chemically stable.
Under thermal decomposition flammable and toxic fumes can be generated. The generation of cleavage
and oxidation products is subject to fire conditions. Non burned residues and contaminated water after
firefighting should be disposed of in compliance with official regulations. Molten material should not be
allowed to be in contact with the skin to which it can cause burns.
11. Toxicological information
No toxic reaction known under normal conditions.
Note: Under decomposition conditions; toxic fumes and contaminated water, see section 10.
12. Ecological information
For transportation, storage, normal use, no toxicological effect known.
13. Disposal considerations
As non-hazardous solid waste, nonwovens can be disposed of, depending on local legislation, through
recycling, incineration or landfill.
14. Transport information
Not classified as hazardous for transport.
Keep the product dry during transportation.
In case of fire see sections 5 and 10
No further specific requirements.
15. Regulatory information
None.
16. Other information
None
by | Sep 27, 2025
INDEX
27M1
27M100P100
27M100P750
27M100VP10
27M10D1000
27M130P100
27M130P625
27M130P750
27M130VP10
SAFETY DATA SHEET
Page 1 of 6 CORECELL
TM
FOAM
1 Product and Company Identification
Product identification: CORECELL
TM
Foam A,K,M,P,S,T series
Application of the material: Structural rigid foam panel
Supplier/Manufacturer: Gurit (USA) Inc.
115 Broadcommon Road
Bristol, Rhode Island 02809
USA Tel: 401-396-5008
For additional information : Health, Safety and Environment department:
Email:
regulatory@gurit.com
Emergency phone number: 1-800-424-9300
Date of issue: 28/05/15
2 Hazards Identification
THIS PRODUCT WHEN SOLD IS NOT CLASSIFIED AS A HAZAR DOUS CHEMICAL PER OSHA HCS-2012.
However, when subject to machining operations under normal condition of use, the release of dust may pose a
combustible dust risk if work is not performed under good industrial and safety practices.
WARNING!
May form combustible dust in the air.
– Prevent dust accumulations to minimize explosion hazard.
– Keep away from all ignition sources including heat, sparks and flame.
3 Composition/Information on Ingredients
Corecell
TM
is a structural expanded polymer product having some of the characteristics of SAN copolymer
CAS 9003-54-7. The chemicals listed below will be released when processing the product. Trace levels of
residual acrylonitrile monomers is also expected to be released in small amounts during processing operations.
Chemical name CAS number % concentration
Acetone 67-64-1 1 5 %
Hexane isomers 92112-69-1 1 5 %
SAFETY DATA SHEET
Page 2 of 6 CORECELL
TM
FOAM
6 Accidental Release Measures
Personal precautions, protective equipment and emergency procedures: No special measures required.
Clean up methods and materials: Vacuum or sweep up material.
5 Fire-Fighting Measures
Suitable extinguishing media: Water, foam, carbon dioxide or dry chemical fire extinguishers.
Specific hazards: Formation of toxic gases will occur during thermal decomposition or in case
of fire. Hazardous combustion products include Carbon monoxide, Carbon
dioxide, Nitrogen oxides, Hydrogen cyanide and Hydrogen bromide.
Protective equipment: Wear fully protective suit with self contained breathing apparatus (SCBA)
with a face-piece operated in positive pressure mode. Reduce direct exposure
to smoke and fumes.
4 First-Aid Measures
Eye contact: If dust particles become lodged in eyes, rinse immediately with plenty of water. If symptoms
persist, consult a physician.
Skin contact: No need for specific measures.
Ingestion: In case of persistent symptoms, consult a physician.
Inhalation: If affected by dust or vapors, remove individual to fresh air. If condition persists, obtain
medical attention.
Most important symptoms/effects: Upper respiratory system irritation.
Immediate medical attention and special treatment: No special requirements.
7 Handling and Storage
Handling: Machining operations which can produce dust should be properly fitted to a dust collection system.
Prevent formation of dust that could create explosive atmospheres.
Provide adequate general ventilation and local exhaust ventilation during machining and processing
operations to control airborne contaminant exposure.
Processing the product through heated equipment or tools could enhance the release of organic vapors.
Accumulation of static electricity charges may appear during machining operations or handling of the
material. Ensure all machining equipment are bonded and grounded to reduce static energy build-up.
Static electricity might give an unpleasant sensation but is not a possible source of ignition.
Storage: Protect from heat and open flames. This product is a combustible material and should be stored
according to the national or local Fire Code.
Trace levels of organic vapors may be released for a while after machining operations. Ensure good
mechanical ventilation for storage of large quantities of the processed product.
Date of issue: 28/05/15
SAFETY DATA SHEET
Page 3 of 6 CORECELL
TM
FOAM
8 Exposure Controls / Personal Protection
Exposure limits :
Ingredient name CAS# OSHA (PEL) ACGIH (TLV)
Acetone 67-64-1 1000 ppm (TWA)
500 ppm
(TWA)
;
750 ppm (STEL)
Hexane isomers 92112-69-1 –
500 ppm
(TWA)
;
1000 ppm (STEL)
Particulates Not Otherwise Regulated – 15 mg/m
3
(TWA) –
Note: Dust fraction size from machining operations will not constitute a respirable dust issue.
Engineering controls: Provide general and local exhaust ventilation to control airborne contaminant.
Personal protection equipments:
– Wear safety glasses/goggles.
– Wear general purpose gloves and protective work clothing.
– Wear approved NIOSH respirator with organic vapour cartridge if vapors are not adequately
controlled. Breathing protection recommended if excessive dust is generated.
General measures: Handle product with good industrial and safety practices.
Date of issue: 28/05/15
9 Physical and Chemical Properties
Physical state: Solid
Color: Yellow
Odor: Nearly odorless
Flash point: Not applicable
Melting point: Softening point 70
o
C – 120
o
C (158
o
F – 248
o
F)
Thermal degradation: >180
o
C (356
o
F)
Boiling point: Not applicable
Ignition temperature: Not available
Relative density: 0.05-0.5 g/cm
3
Vapor pressure: Not applicable
Solubility in water: Insoluble
Note: Items not included in this section are not available or not relevant to this product.
SAFETY DATA SHEET
Page 4 of 6 CORECELL
TM
FOAM
11 Toxicological Information
Toxicological data:
Substance LC50 (Inhalation Rat) LD50 (Oral Rat)
Acetone 21 000 ppm (8h) 5800 mg/kg
Route of exposure (when processing product): inhalation, eye contact.
Dust and vapors released when machining the product may cause irritation to upper
respiratory tract.
Dust and vapors released when machining the product may cause eye irritation.
Product is not expected to present harmful effects if swallowed.
Sensitization: No sensitizing effects known.
Chronic toxicity: No data available.
The product has not been tested as a whole for its possible chronic effects.
Additional information: It is recommended that pregnant or breastfeeding women should not be working in
areas where this product is processed.
Date of issue: 28/05/15
10 Stability and Reactivity
Chemical stability: This product is stable.
Conditions to avoid: Do not overheat to avoid thermal decomposition. Keep away from open flames.
Chemical reactivity: No relevant information available.
Possibility of hazardous reactions: No hazardous reactions known.
Incompatibility with other substances: Strong oxidizers, strong acids and bases will damage the product.
Hazardous decomposition products: Decomposition products include but are not limited to: Residual
monomers, Carbon monoxide, Carbon dioxide, Nitrogen oxides,
Hydrogen cyanide and Hydrogen bromide.
SAFETY DATA SHEET
Page 5 of 6 CORECELL
TM
FOAM
Regulatory status: This product is subject to hazardous classification only if machining or processing
the product is considered normal conditions of use. See safety label at the end of this
Safety Data Sheet as required by OSHA HCS.
TSCA (USA): All substances are listed.
California Prop. 65: This product contains trace quantities of a substance known to the State of California
to cause cancer: Acrylonitrile.
15 Regulatory Information
14 Transport Information
Regulatory status
(DOT; IMDG/IATA): Not regulated for transport.
13 Disposal Considerations
Waste disposal: Product is stable and may be disposed of in approved landfills. Toxic gases will be
generated if product is burned. Disposal of waste material should be done according to
applicable Federal and State regulations.
16 Other Information
References: 29CFR 1910.1200 OSHA Hazard Communication Standard (2012);
Notice to the reader:
To the best of our knowledge, the information contained herein is accurate at the date of its publication.
However, this shall not constitute a guarantee for any specific product features and shall not establish a
legally valid contractual relationship.
12 Ecological Information
Ecotoxicity data: No data available.
Persistence, biodegradability and mobility: No data available.
Date of issue: 28/05/15
SAFETY LABEL
Page 6 of 6 CORECELL
TM
FOAM
Corecell
TM
Foam
When this product is subject to processing methods under normal condition
of use, the release of dust may pose a combustible dust risk if work is not
performed under good industrial and safety practices.
WARNING!
May form combustible dust in the air.
Prevent dust accumulations to minimize explosion hazard.
Keep away from all ignition sources including heat, sparks and flame.
Gurit (USA) Inc.
115 Broadcommon Road
Bristol, Rhode Island 02809 USA
Tel: 401-396-5008
by | Sep 27, 2025
INDEX
27M1
27M100P100
27M100P750
27M100VP10
27M10D1000
27M130P100
27M130P625
27M130P750
27M130VP10
SAFETY DATA SHEET
Page 1 of 6 CORECELL
TM
FOAM
1 Product and Company Identification
Product identification: CORECELL
TM
Foam A,K,M,P,S,T series
Application of the material: Structural rigid foam panel
Supplier/Manufacturer: Gurit (USA) Inc.
115 Broadcommon Road
Bristol, Rhode Island 02809
USA Tel: 401-396-5008
For additional information : Health, Safety and Environment department:
Email:
regulatory@gurit.com
Emergency phone number: 1-800-424-9300
Date of issue: 28/05/15
2 Hazards Identification
THIS PRODUCT WHEN SOLD IS NOT CLASSIFIED AS A HAZAR DOUS CHEMICAL PER OSHA HCS-2012.
However, when subject to machining operations under normal condition of use, the release of dust may pose a
combustible dust risk if work is not performed under good industrial and safety practices.
WARNING!
May form combustible dust in the air.
– Prevent dust accumulations to minimize explosion hazard.
– Keep away from all ignition sources including heat, sparks and flame.
3 Composition/Information on Ingredients
Corecell
TM
is a structural expanded polymer product having some of the characteristics of SAN copolymer
CAS 9003-54-7. The chemicals listed below will be released when processing the product. Trace levels of
residual acrylonitrile monomers is also expected to be released in small amounts during processing operations.
Chemical name CAS number % concentration
Acetone 67-64-1 1 5 %
Hexane isomers 92112-69-1 1 5 %
SAFETY DATA SHEET
Page 2 of 6 CORECELL
TM
FOAM
6 Accidental Release Measures
Personal precautions, protective equipment and emergency procedures: No special measures required.
Clean up methods and materials: Vacuum or sweep up material.
5 Fire-Fighting Measures
Suitable extinguishing media: Water, foam, carbon dioxide or dry chemical fire extinguishers.
Specific hazards: Formation of toxic gases will occur during thermal decomposition or in case
of fire. Hazardous combustion products include Carbon monoxide, Carbon
dioxide, Nitrogen oxides, Hydrogen cyanide and Hydrogen bromide.
Protective equipment: Wear fully protective suit with self contained breathing apparatus (SCBA)
with a face-piece operated in positive pressure mode. Reduce direct exposure
to smoke and fumes.
4 First-Aid Measures
Eye contact: If dust particles become lodged in eyes, rinse immediately with plenty of water. If symptoms
persist, consult a physician.
Skin contact: No need for specific measures.
Ingestion: In case of persistent symptoms, consult a physician.
Inhalation: If affected by dust or vapors, remove individual to fresh air. If condition persists, obtain
medical attention.
Most important symptoms/effects: Upper respiratory system irritation.
Immediate medical attention and special treatment: No special requirements.
7 Handling and Storage
Handling: Machining operations which can produce dust should be properly fitted to a dust collection system.
Prevent formation of dust that could create explosive atmospheres.
Provide adequate general ventilation and local exhaust ventilation during machining and processing
operations to control airborne contaminant exposure.
Processing the product through heated equipment or tools could enhance the release of organic vapors.
Accumulation of static electricity charges may appear during machining operations or handling of the
material. Ensure all machining equipment are bonded and grounded to reduce static energy build-up.
Static electricity might give an unpleasant sensation but is not a possible source of ignition.
Storage: Protect from heat and open flames. This product is a combustible material and should be stored
according to the national or local Fire Code.
Trace levels of organic vapors may be released for a while after machining operations. Ensure good
mechanical ventilation for storage of large quantities of the processed product.
Date of issue: 28/05/15
SAFETY DATA SHEET
Page 3 of 6 CORECELL
TM
FOAM
8 Exposure Controls / Personal Protection
Exposure limits :
Ingredient name CAS# OSHA (PEL) ACGIH (TLV)
Acetone 67-64-1 1000 ppm (TWA)
500 ppm
(TWA)
;
750 ppm (STEL)
Hexane isomers 92112-69-1 –
500 ppm
(TWA)
;
1000 ppm (STEL)
Particulates Not Otherwise Regulated – 15 mg/m
3
(TWA) –
Note: Dust fraction size from machining operations will not constitute a respirable dust issue.
Engineering controls: Provide general and local exhaust ventilation to control airborne contaminant.
Personal protection equipments:
– Wear safety glasses/goggles.
– Wear general purpose gloves and protective work clothing.
– Wear approved NIOSH respirator with organic vapour cartridge if vapors are not adequately
controlled. Breathing protection recommended if excessive dust is generated.
General measures: Handle product with good industrial and safety practices.
Date of issue: 28/05/15
9 Physical and Chemical Properties
Physical state: Solid
Color: Yellow
Odor: Nearly odorless
Flash point: Not applicable
Melting point: Softening point 70
o
C – 120
o
C (158
o
F – 248
o
F)
Thermal degradation: >180
o
C (356
o
F)
Boiling point: Not applicable
Ignition temperature: Not available
Relative density: 0.05-0.5 g/cm
3
Vapor pressure: Not applicable
Solubility in water: Insoluble
Note: Items not included in this section are not available or not relevant to this product.
SAFETY DATA SHEET
Page 4 of 6 CORECELL
TM
FOAM
11 Toxicological Information
Toxicological data:
Substance LC50 (Inhalation Rat) LD50 (Oral Rat)
Acetone 21 000 ppm (8h) 5800 mg/kg
Route of exposure (when processing product): inhalation, eye contact.
Dust and vapors released when machining the product may cause irritation to upper
respiratory tract.
Dust and vapors released when machining the product may cause eye irritation.
Product is not expected to present harmful effects if swallowed.
Sensitization: No sensitizing effects known.
Chronic toxicity: No data available.
The product has not been tested as a whole for its possible chronic effects.
Additional information: It is recommended that pregnant or breastfeeding women should not be working in
areas where this product is processed.
Date of issue: 28/05/15
10 Stability and Reactivity
Chemical stability: This product is stable.
Conditions to avoid: Do not overheat to avoid thermal decomposition. Keep away from open flames.
Chemical reactivity: No relevant information available.
Possibility of hazardous reactions: No hazardous reactions known.
Incompatibility with other substances: Strong oxidizers, strong acids and bases will damage the product.
Hazardous decomposition products: Decomposition products include but are not limited to: Residual
monomers, Carbon monoxide, Carbon dioxide, Nitrogen oxides,
Hydrogen cyanide and Hydrogen bromide.
SAFETY DATA SHEET
Page 5 of 6 CORECELL
TM
FOAM
Regulatory status: This product is subject to hazardous classification only if machining or processing
the product is considered normal conditions of use. See safety label at the end of this
Safety Data Sheet as required by OSHA HCS.
TSCA (USA): All substances are listed.
California Prop. 65: This product contains trace quantities of a substance known to the State of California
to cause cancer: Acrylonitrile.
15 Regulatory Information
14 Transport Information
Regulatory status
(DOT; IMDG/IATA): Not regulated for transport.
13 Disposal Considerations
Waste disposal: Product is stable and may be disposed of in approved landfills. Toxic gases will be
generated if product is burned. Disposal of waste material should be done according to
applicable Federal and State regulations.
16 Other Information
References: 29CFR 1910.1200 OSHA Hazard Communication Standard (2012);
Notice to the reader:
To the best of our knowledge, the information contained herein is accurate at the date of its publication.
However, this shall not constitute a guarantee for any specific product features and shall not establish a
legally valid contractual relationship.
12 Ecological Information
Ecotoxicity data: No data available.
Persistence, biodegradability and mobility: No data available.
Date of issue: 28/05/15
SAFETY LABEL
Page 6 of 6 CORECELL
TM
FOAM
Corecell
TM
Foam
When this product is subject to processing methods under normal condition
of use, the release of dust may pose a combustible dust risk if work is not
performed under good industrial and safety practices.
WARNING!
May form combustible dust in the air.
Prevent dust accumulations to minimize explosion hazard.
Keep away from all ignition sources including heat, sparks and flame.
Gurit (USA) Inc.
115 Broadcommon Road
Bristol, Rhode Island 02809 USA
Tel: 401-396-5008
by | Sep 27, 2025
SAFETY DATA SHEET
Page 1 of 6 CORECELL
TM
FOAM
1 Product and Company Identification
Product identification: CORECELL
TM
Foam A,M,P,S,T series
Application of the material: Structural rigid foam panel
Supplier: Gurit (USA) Inc.
115 Broadcommon Road
Bristol, Rhode Island 02809
USA Tel: 401-396-5008
For additional information : Health, Safety and Environment department:
Email: regulatory@gurit.com
Emergency phone number: 1-866-928-0789
Date of issue: 04/09/18
2 Hazards Identification
THIS PRODUCT WHEN SOLD IS NOT CLASSIFIED HAZARDOUS PER OSHA HCS-2012.
However, when subject to machining operations under normal condition of use, the release of dust may pose a
combustible dust risk if work is not performed under good industrial and safety practices.
WARNING!
May form combustible dust in the air.
– Prevent dust accumulations to minimize explosion hazard.
– Keep away from all ignition sources including heat, sparks and flame.
3 Composition/Information on Ingredients
Organic compound vapours will be released during process operations on the product. These compounds are
listed below to inform users of the potential health risks associated with it.
Chemical name CAS number % concentration
Acetone 67-64-1 1 5 %
2- methyl pentane 107-83-5 1 5 %
Corecell
TM
is a structural expanded polymer product having some of the characteristics of SAN copolymer
(CAS 9003-54-7). Trace levels of residual acrylonitrile monomers is also expected to be released in small
amounts during processing operations.
SAFETY DATA SHEET
Page 2 of 6 CORECELL
TM
FOAM
6 Accidental Release Measures
Personal precautions, protective equipment and emergency procedures: No special measures required.
Clean up methods and materials: Vacuum or sweep up material.
5 Fire-Fighting Measures
Suitable extinguishing media: Water, foam, carbon dioxide or dry chemical fire extinguishers.
Specific hazards: Formation of toxic gases will occur during thermal decomposition or in case
of fire. Hazardous combustion products include Carbon monoxide, Carbon
dioxide, Nitrogen oxides, Hydrogen cyanide and Hydrogen bromide.
Protective equipment: Wear fully protective suit with self-contained breathing apparatus (SCBA)
with a face-piece operated in positive pressure mode. Reduce direct exposure
to smoke and fumes.
4 First-Aid Measures
Eye contact: If dust particles become lodged in eyes, rinse immediately with plenty of water. If symptoms
persist, consult a physician.
Skin contact: No need for specific measures.
Ingestion: In case of persistent symptoms, consult a physician.
Inhalation: If affected by dust or vapors, remove individual to fresh air. If condition persists, obtain
medical attention.
Most important symptoms/effects: Upper respiratory system irritation.
Immediate medical attention and special treatment: No special requirements.
7 Handling and Storage
Handling: Machining operations which can produce dust should be properly fitted to a dust collection system.
Prevent formation of dust that could create explosive atmospheres.
Provide local exhaust ventilation during machining and processing operations to control airborne
contaminant exposure.
Processing the product through heated equipment or tools could enhance the release of organic vapors.
Accumulation of static electricity charges may appear during machining operations or handling of the
material. Ensure all machining equipment are bonded and grounded to reduce static energy build-up.
Storage: Protect from heat and open flames. This product is a combustible material and should be stored
according to the national or local Fire Code.
Trace levels of organic vapors may be released for a while after machining operations. Ensure good
mechanical ventilation for storage of large quantities of the processed product.
Date of issue: 04/09/18
SAFETY DATA SHEET
Page 3 of 6 CORECELL
TM
FOAM
8 Exposure Controls / Personal Protection
Exposure limits :
Ingredient name CAS# OSHA (PEL) ACGIH (TLV)
Acetone 67-64-1 1000 ppm (TWA)
500 ppm (TWA) ;
750 ppm (STEL)
2- methyl pentane 107-83-5 –
500 ppm (TWA) ;
1000 ppm (STEL)
Particulates Not Otherwise Regulated – 15 mg/m
3
(TWA) –
Note: Dust fraction size from machining operations will not constitute a respirable dust issue.
Engineering controls: Provide general and local exhaust ventilation to control airborne contaminant.
Personal protection equipments:
– Wear safety glasses/goggles.
– Wear general purpose gloves and protective work clothing.
– Wear approved NIOSH respirator with organic vapour cartridge if vapors are not adequately
controlled. Breathing protection recommended if excessive dust is generated.
General measures: Handle product with good industrial and safety practices.
Date of issue: 04/09/18
9 Physical and Chemical Properties
Physical state: Solid
Color: Yellow
Odor: Nearly odorless
Flash point: Not applicable
Melting point: Softening point 70
o
C – 120
o
C (158
o
F – 248
o
F)
Thermal degradation: >180
o
C (356
o
F)
Boiling point: Not applicable
Ignition temperature: Not available
Relative density: 0.05-0.5 g/cm
3
Vapor pressure: Not applicable
Solubility in water: Insoluble
Note: Items not included in this section are not available or not relevant to this product.
SAFETY DATA SHEET
Page 4 of 6 CORECELL
TM
FOAM
11 Toxicological Information
Toxicological data:
Substance LC50 (Inhalation Rat) LD50 (Oral Rat)
Acetone 21 000 ppm (8h) 5800 mg/kg
Route of exposure (when processing product): inhalation, eye contact.
Dust and vapors released when machining the product may cause irritation to upper
respiratory tract.
Dust and vapors released when machining the product may cause eye irritation.
Product is not expected to present harmful effects if swallowed.
Sensitization: No sensitizing effects known.
Chronic toxicity: No data available.
The product has not been tested as a whole for its possible chronic effects.
Additional information: It is recommended that pregnant or breastfeeding women should not be working in
areas where this product is processed.
Date of issue: 04/09/18
10 Stability and Reactivity
Chemical stability: This product is stable.
Conditions to avoid: Do not overheat to avoid thermal decomposition. Keep away from open flames. Avoid
ignition source with dust cloud formed during machining operations.
Chemical reactivity: No relevant information available.
Possibility of hazardous reactions: No hazardous reactions known.
Incompatibility with other substances: Strong oxidizers, strong acids and bases will damage the product.
Hazardous decomposition products: Decomposition products include but are not limited to: Residual
monomers, Carbon monoxide, Carbon dioxide, Nitrogen oxides,
Hydrogen cyanide and Hydrogen bromide.
SAFETY DATA SHEET
Page 5 of 6 CORECELL
TM
FOAM
Regulatory status: This product is subject to hazardous classification only if machining or processing
the product is considered normal conditions of use. See safety label at the end of this
Safety Data Sheet as required by OSHA HCS.
TSCA: Exempt from TSCA requirements because it meets the definition of an article.
California Prop. 65: WARNING: Processing this product may expose you to trace quantities of
acrylonitrile, a substance known to the State of California to cause cancer. For more
information, visit www.P65warnings.ca.gov.
15 Regulatory Information
14 Transport Information
Regulatory status
(DOT; IMDG/IATA): Not regulated for transport.
13 Disposal Considerations
Waste disposal: Product is stable and may be disposed of in approved landfills. Toxic gases will be
generated if product is burned. Disposal of waste material should be done according to
applicable Federal and State regulations.
16 Other Information
References: 29CFR 1910.1200 OSHA Hazard Communication Standard (2012);
Proposition 65, California Office of Environmental Health Hazard Assessment.
Notice to the reader:
To the best of our knowledge, the information contained herein is accurate at the date of its publication.
However, this shall not constitute a guarantee for any specific product features and shall not establish a
legally valid contractual relationship.
12 Ecological Information
Ecotoxicity data: No data available.
Persistence, biodegradability and mobility: No data available.
Date of issue: 04/09/18
SAFETY LABEL
Page 6 of 6 CORECELL
TM
FOAM
Corecell
TM
Foam
When this product is subject to processing methods under normal condition
of use, the release of dust may pose a combustible dust risk if work is not
performed under good industrial and safety practices.
WARNING!
May form combustible dust in the air.
Prevent dust accumulations to minimize explosion hazard.
Keep away from all ignition sources including heat, sparks and flame.
California State requirements:
WARNING: Processing this product may expose you to trace quantities of
acrylonitrile, a substance known to the State of California to cause cancer. For
more information, visit www.P65warnings.ca.gov.
Gurit (USA) Inc.
115 Broadcommon Road
Bristol, Rhode Island 02809 USA
Tel: 401-396-5008
by | Sep 27, 2025
INDEX
27M1
27M100P100
27M100P750
27M100VP10
27M10D1000
27M130P100
27M130P625
27M130P750
27M130VP10
SAFETY DATA SHEET
Page 1 of 6 CORECELL
TM
FOAM
1 Product and Company Identification
Product identification: CORECELL
TM
Foam A,K,M,P,S,T series
Application of the material: Structural rigid foam panel
Supplier/Manufacturer: Gurit (USA) Inc.
115 Broadcommon Road
Bristol, Rhode Island 02809
USA Tel: 401-396-5008
For additional information : Health, Safety and Environment department:
Email:
regulatory@gurit.com
Emergency phone number: 1-800-424-9300
Date of issue: 28/05/15
2 Hazards Identification
THIS PRODUCT WHEN SOLD IS NOT CLASSIFIED AS A HAZAR DOUS CHEMICAL PER OSHA HCS-2012.
However, when subject to machining operations under normal condition of use, the release of dust may pose a
combustible dust risk if work is not performed under good industrial and safety practices.
WARNING!
May form combustible dust in the air.
– Prevent dust accumulations to minimize explosion hazard.
– Keep away from all ignition sources including heat, sparks and flame.
3 Composition/Information on Ingredients
Corecell
TM
is a structural expanded polymer product having some of the characteristics of SAN copolymer
CAS 9003-54-7. The chemicals listed below will be released when processing the product. Trace levels of
residual acrylonitrile monomers is also expected to be released in small amounts during processing operations.
Chemical name CAS number % concentration
Acetone 67-64-1 1 5 %
Hexane isomers 92112-69-1 1 5 %
SAFETY DATA SHEET
Page 2 of 6 CORECELL
TM
FOAM
6 Accidental Release Measures
Personal precautions, protective equipment and emergency procedures: No special measures required.
Clean up methods and materials: Vacuum or sweep up material.
5 Fire-Fighting Measures
Suitable extinguishing media: Water, foam, carbon dioxide or dry chemical fire extinguishers.
Specific hazards: Formation of toxic gases will occur during thermal decomposition or in case
of fire. Hazardous combustion products include Carbon monoxide, Carbon
dioxide, Nitrogen oxides, Hydrogen cyanide and Hydrogen bromide.
Protective equipment: Wear fully protective suit with self contained breathing apparatus (SCBA)
with a face-piece operated in positive pressure mode. Reduce direct exposure
to smoke and fumes.
4 First-Aid Measures
Eye contact: If dust particles become lodged in eyes, rinse immediately with plenty of water. If symptoms
persist, consult a physician.
Skin contact: No need for specific measures.
Ingestion: In case of persistent symptoms, consult a physician.
Inhalation: If affected by dust or vapors, remove individual to fresh air. If condition persists, obtain
medical attention.
Most important symptoms/effects: Upper respiratory system irritation.
Immediate medical attention and special treatment: No special requirements.
7 Handling and Storage
Handling: Machining operations which can produce dust should be properly fitted to a dust collection system.
Prevent formation of dust that could create explosive atmospheres.
Provide adequate general ventilation and local exhaust ventilation during machining and processing
operations to control airborne contaminant exposure.
Processing the product through heated equipment or tools could enhance the release of organic vapors.
Accumulation of static electricity charges may appear during machining operations or handling of the
material. Ensure all machining equipment are bonded and grounded to reduce static energy build-up.
Static electricity might give an unpleasant sensation but is not a possible source of ignition.
Storage: Protect from heat and open flames. This product is a combustible material and should be stored
according to the national or local Fire Code.
Trace levels of organic vapors may be released for a while after machining operations. Ensure good
mechanical ventilation for storage of large quantities of the processed product.
Date of issue: 28/05/15
SAFETY DATA SHEET
Page 3 of 6 CORECELL
TM
FOAM
8 Exposure Controls / Personal Protection
Exposure limits :
Ingredient name CAS# OSHA (PEL) ACGIH (TLV)
Acetone 67-64-1 1000 ppm (TWA)
500 ppm
(TWA)
;
750 ppm (STEL)
Hexane isomers 92112-69-1 –
500 ppm
(TWA)
;
1000 ppm (STEL)
Particulates Not Otherwise Regulated – 15 mg/m
3
(TWA) –
Note: Dust fraction size from machining operations will not constitute a respirable dust issue.
Engineering controls: Provide general and local exhaust ventilation to control airborne contaminant.
Personal protection equipments:
– Wear safety glasses/goggles.
– Wear general purpose gloves and protective work clothing.
– Wear approved NIOSH respirator with organic vapour cartridge if vapors are not adequately
controlled. Breathing protection recommended if excessive dust is generated.
General measures: Handle product with good industrial and safety practices.
Date of issue: 28/05/15
9 Physical and Chemical Properties
Physical state: Solid
Color: Yellow
Odor: Nearly odorless
Flash point: Not applicable
Melting point: Softening point 70
o
C – 120
o
C (158
o
F – 248
o
F)
Thermal degradation: >180
o
C (356
o
F)
Boiling point: Not applicable
Ignition temperature: Not available
Relative density: 0.05-0.5 g/cm
3
Vapor pressure: Not applicable
Solubility in water: Insoluble
Note: Items not included in this section are not available or not relevant to this product.
SAFETY DATA SHEET
Page 4 of 6 CORECELL
TM
FOAM
11 Toxicological Information
Toxicological data:
Substance LC50 (Inhalation Rat) LD50 (Oral Rat)
Acetone 21 000 ppm (8h) 5800 mg/kg
Route of exposure (when processing product): inhalation, eye contact.
Dust and vapors released when machining the product may cause irritation to upper
respiratory tract.
Dust and vapors released when machining the product may cause eye irritation.
Product is not expected to present harmful effects if swallowed.
Sensitization: No sensitizing effects known.
Chronic toxicity: No data available.
The product has not been tested as a whole for its possible chronic effects.
Additional information: It is recommended that pregnant or breastfeeding women should not be working in
areas where this product is processed.
Date of issue: 28/05/15
10 Stability and Reactivity
Chemical stability: This product is stable.
Conditions to avoid: Do not overheat to avoid thermal decomposition. Keep away from open flames.
Chemical reactivity: No relevant information available.
Possibility of hazardous reactions: No hazardous reactions known.
Incompatibility with other substances: Strong oxidizers, strong acids and bases will damage the product.
Hazardous decomposition products: Decomposition products include but are not limited to: Residual
monomers, Carbon monoxide, Carbon dioxide, Nitrogen oxides,
Hydrogen cyanide and Hydrogen bromide.
SAFETY DATA SHEET
Page 5 of 6 CORECELL
TM
FOAM
Regulatory status: This product is subject to hazardous classification only if machining or processing
the product is considered normal conditions of use. See safety label at the end of this
Safety Data Sheet as required by OSHA HCS.
TSCA (USA): All substances are listed.
California Prop. 65: This product contains trace quantities of a substance known to the State of California
to cause cancer: Acrylonitrile.
15 Regulatory Information
14 Transport Information
Regulatory status
(DOT; IMDG/IATA): Not regulated for transport.
13 Disposal Considerations
Waste disposal: Product is stable and may be disposed of in approved landfills. Toxic gases will be
generated if product is burned. Disposal of waste material should be done according to
applicable Federal and State regulations.
16 Other Information
References: 29CFR 1910.1200 OSHA Hazard Communication Standard (2012);
Notice to the reader:
To the best of our knowledge, the information contained herein is accurate at the date of its publication.
However, this shall not constitute a guarantee for any specific product features and shall not establish a
legally valid contractual relationship.
12 Ecological Information
Ecotoxicity data: No data available.
Persistence, biodegradability and mobility: No data available.
Date of issue: 28/05/15
SAFETY LABEL
Page 6 of 6 CORECELL
TM
FOAM
Corecell
TM
Foam
When this product is subject to processing methods under normal condition
of use, the release of dust may pose a combustible dust risk if work is not
performed under good industrial and safety practices.
WARNING!
May form combustible dust in the air.
Prevent dust accumulations to minimize explosion hazard.
Keep away from all ignition sources including heat, sparks and flame.
Gurit (USA) Inc.
115 Broadcommon Road
Bristol, Rhode Island 02809 USA
Tel: 401-396-5008
by | Sep 27, 2025
Gurit Kerdyn, Gurit Kerdyn Green, Gurit Kerdyn
Green FR
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
Issue date: 2/15/2021 Revision date: 7/12/2021 Supersedes: 2/15/2021 Version: 2.0
7/12/2021 (Revision date)EN (English US) 1/8
SECTION 1: Identification
1.1. Identification
Product form
:Article
Name
:Gurit Kerdyn, Gurit Kerdyn Green, Gurit Kerdyn Green FR
Synonyms
:polyethylene terephthalate polymer (PET)
1.2. Recommended use and restrictions on use
Recommended use
:The product is intended for professional use
1.3. Supplier
Gurit (USA) Inc
115 Broadcommon Road
Rhode Island, 2809 – USA
T +1 401 396 5008 (All Technical and Commercial Enquiries)
marine-na@gurit.com – www.Gurit.com
Manufacturer
Gurit (Italy) s.r.l
Via Torino , 105
Volpiano (TO), 10088
T +39 11 995 28 81 – F +39 11 995 36 02
Regulatory@gurit.com – www.gurit.com
1.4. Emergency telephone number
Emergency number
:Carechem 24: +1 646 844 7309
Carechem 24 (Toll Free): +1 866 928 0789
Telephone number for use in case of chemical exposure, spillage or fire only.
SECTION 2: Hazard(s) identification
2.1. Classification of the substance or mixture
GHS US classification
Combustible Dust
May form combustible dust concentrations in air
Full text of H statements : see section 16
2.2. GHS Label elements, including precautionary statements
GHS US labeling
Signal word (GHS US)
:Warning
Hazard statements (GHS US)
:May form combustible dust concentrations in air
2.3. Other hazards which do not result in classification
Other hazards which do not result in classification
:Machining: Hazardous vapors may be released.
2.4. Unknown acute toxicity (GHS US)
Not applicable
SECTION 3: Composition/Information on ingredients
3.1. Substances
Not applicable
Gurit Kerdyn, Gurit Kerdyn Green, Gurit Kerdyn Green FR
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
7/12/2021 (Revision date)EN (English US) 2/83.2. Mixtures
Comments
:Use of blowing agents in manufacture of foam: Cyclopentane
This mixture does not contain any substances to be mentioned according to the criteria of section 3.2 of HazCom 2012
SECTION 4: First-aid measures
4.1. Description of first aid measures
First-aid measures after inhalation
:Remove person to fresh air and keep comfortable for breathing.
First-aid measures after skin contact
:Wash skin with plenty of water.
First-aid measures after eye contact
:Rinse eyes with water as a precaution.
First-aid measures after ingestion
:Call a poison center/doctor/physician if you feel unwell.
4.2. Most important symptoms and effects (acute and delayed)
No additional information available
4.3. Immediate medical attention and special treatment, if necessary
Treat symptomatically.
SECTION 5: Fire-fighting measures
5.1. Suitable (and unsuitable) extinguishing media
Suitable extinguishing media
:Water spray. Dry powder. Foam. Carbon dioxide.
5.2. Specific hazards arising from the chemical
Hazardous decomposition products in case of fire
:Toxic fumes may be released.
5.3. Special protective equipment and precautions for fire-fighters
Protection during firefighting
:Do not attempt to take action without suitable protective equipment. Self-contained breathing
apparatus. Complete protective clothing.
SECTION 6: Accidental release measures
6.1. Personal precautions, protective equipment and emergency procedures
6.1.1. For non-emergency personnel
Emergency procedures
:Ventilate spillage area.
6.1.2. For emergency responders
Protective equipment
:For further information refer to section 8: “Exposure controls/personal protection”.
6.2. Environmental precautions
Avoid release to the environment.
6.3. Methods and material for containment and cleaning up
Methods for cleaning up
:Mechanically recover the product.
Other information
:No special measures required.
6.4. Reference to other sections
For further information refer to section 13.
Gurit Kerdyn, Gurit Kerdyn Green, Gurit Kerdyn Green FR
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
7/12/2021 (Revision date)EN (English US) 3/8
SECTION 7: Handling and storage
7.1. Precautions for safe handling
Precautions for safe handling
:Ensure good ventilation of the work station. Wear personal protective equipment.
Hygiene measures
:Do not eat, drink or smoke when using this product. Always wash hands after handling the
product.
7.2. Conditions for safe storage, including any incompatibilities
Storage conditions
:Store in a well-ventilated place. Keep cool.
SECTION 8: Exposure controls/personal protection
8.1. Control parameters
Gurit Kerdyn, Gurit Kerdyn Green, Gurit Kerdyn Green FR USA – OSHA – Occupational Exposure LimitsLocal nameTotal Dust (Inert or Nuisance Dust)OSHA PEL (TWA) [1]15 mg/m OSHA PEL (TWA) [2]50 mppcfRegulatory reference (US-OSHA)OSHA Annotated Table Z-3 Mineral Dusts
8.2. Appropriate engineering controls
Appropriate engineering controls
:Ensure good ventilation of the work station.
Environmental exposure controls
:Avoid release to the environment.
8.3. Individual protection measures/Personal protective equipment
Hand protection:Protective glovesEye protection:Safety glassesSkin and body protection:Wear suitable protective clothingRespiratory protection:In case of insufficient ventilation, wear suitable respiratory equipment
Personal protective equipment symbol(s):
Gurit Kerdyn, Gurit Kerdyn Green, Gurit Kerdyn Green FR
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
7/12/2021 (Revision date)EN (English US) 4/8
SECTION 9: Physical and chemical properties
9.1. Information on basic physical and chemical properties
Physical state
:Solid
Appearance
:Structural Foam.
Color
:Variable
Odor
:mild
Odor threshold
:No data available
pH
:No data available
Melting point
:> 220 C
Freezing point
:Not applicable
Boiling point
:No data available
Flash point
:Not applicable
Relative evaporation rate (butyl acetate=1)
:No data available
Flammability (solid, gas)
:Non flammable.
Vapor pressure
:No data available
Vapor pressure at 50 C
:Not applicable
Relative vapor density at 20 C
:No data available
Relative density
:No data available
Density
:85 300 kg/m
Solubility
:Insoluble.
Partition coefficient n-octanol/water (Log Pow)
:No data available
Auto-ignition temperature
:Not applicable
Decomposition temperature
:> 300 C
Viscosity, kinematic
:Not applicable
Viscosity, dynamic
:No data available
Explosion limits
:Not applicable
Explosive properties
:No data available
Oxidizing properties
:No data available
9.2. Other information
No additional information available
SECTION 10: Stability and reactivity
10.1. Reactivity
The product is non-reactive under normal conditions of use, storage and transport.
10.2. Chemical stability
Stable under normal conditions.
10.3. Possibility of hazardous reactions
No dangerous reactions known under normal conditions of use.
10.4. Conditions to avoid
None under recommended storage and handling conditions (see section 7).
10.5. Incompatible materials
No additional information available
10.6. Hazardous decomposition products
Under normal conditions of storage and use, hazardous decomposition products should not be produced.
Gurit Kerdyn, Gurit Kerdyn Green, Gurit Kerdyn Green FR
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
7/12/2021 (Revision date)EN (English US) 5/8
SECTION 11: Toxicological information
11.1. Information on toxicological effects
Acute toxicity (oral)
:Not classified
Acute toxicity (dermal)
:Not classified
Acute toxicity (inhalation)
:Not classified
Skin corrosion/irritation
:Not classified
Serious eye damage/irritation
:Not classified
Respiratory or skin sensitization
:Not classified
Germ cell mutagenicity
:Not classified
Carcinogenicity
:Not classified
Reproductive toxicity
:Not classified
STOT-single exposure
:Not classified
STOT-repeated exposure
:Not classified
Aspiration hazard
:Not classified
Viscosity, kinematic
:Not applicable
SECTION 12: Ecological information
12.1. Toxicity
Ecology – general
:The product is not considered harmful to aquatic organisms or to cause long-term adverse
effects in the environment.
12.2. Persistence and degradability
No additional information available
12.3. Bioaccumulative potential
No additional information available
12.4. Mobility in soil
No additional information available
12.5. Other adverse effects
No additional information available
SECTION 13: Disposal considerations
13.1. Disposal methods
Waste treatment methods
:Dispose of contents/container in accordance with licensed collector s sorting instructions.
SECTION 14: Transport information
In accordance with Department of Transport / IMDG / IATA
DOTIMDGIATA14.1. UN numberNot regulated for transport14.2. Proper Shipping NameNot applicableNot applicableNot applicable
Gurit Kerdyn, Gurit Kerdyn Green, Gurit Kerdyn Green FR
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
7/12/2021 (Revision date)EN (English US) 6/8DOTIMDGIATA14.3. Transport hazard class(es)Not applicableNot applicableNot applicable14.4. Packing group Not applicableNot applicableNot applicable14.5. Environmental hazardsNot applicableNot applicableNot applicableNo supplementary information available
14.6. Special precautions for user
DOT
No data available
IMDG
No data available
IATA
No data available
14.7. Transport in bulk according to Annex II of MARPOL 73/78 and the IBC Code
Not applicable
SECTION 15: Regulatory information
15.1. US Federal regulations
All components of this product are listed as Active, or excluded from listing, on the United States Environmental Protection Agency Toxic Substances
Control Act (TSCA) inventory
This product or mixture is not known to contain a toxic chemical or chemicals in excess of the applicable de minimis concentration as specified in 40
CFR 372.38(a) subject to the reporting requirements of section 313 of Title III of the Superfund Amendments and Reauthorization Act of 1986 and 40
CFR Part 372.
15.2. International regulations
CANADA
No additional information available
EU-Regulations
No additional information available
National regulations
No additional information available
15.3. US State regulations
Gurit Kerdyn, Gurit Kerdyn Green, Gurit Kerdyn Green FR U.S. – California – Proposition 65 – Carcinogens ListYesU.S. – California – Proposition 65 – Developmental
Toxicity
No
Gurit Kerdyn, Gurit Kerdyn Green, Gurit Kerdyn Green FR
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
7/12/2021 (Revision date)EN (English US) 7/8Gurit Kerdyn, Gurit Kerdyn Green, Gurit Kerdyn Green FR U.S. – California – Proposition 65 – Reproductive
Toxicity – Female
NoU.S. – California – Proposition 65 – Reproductive
Toxicity – Male
No
California Proposition 65 – This product does not contain any substances known to the state of California to cause cancer, developmental and/or
reproductive harm
SECTION 16: Other information
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
Revision date
:07/12/2021
Abbreviations and acronymsADNEuropean Agreement concerning the International Carriage of Dangerous Goods by Inland WaterwaysADREuropean Agreement concerning the International Carriage of Dangerous Goods by RoadATEAcute Toxicity EstimateBCFBioconcentration factorBLVBiological limit valueBODBiochemical oxygen demand (BOD)CODChemical oxygen demand (COD)DMELDerived Minimal Effect levelDNELDerived-No Effect LevelEC-No.European Community numberEC50Median effective concentrationENEuropean StandardIARCInternational Agency for Research on CancerIATAInternational Air Transport AssociationIMDGInternational Maritime Dangerous GoodsLC50Median lethal concentrationLD50Median lethal doseLOAELLowest Observed Adverse Effect LevelNOAECNo-Observed Adverse Effect ConcentrationNOAELNo-Observed Adverse Effect LevelNOECNo-Observed Effect ConcentrationOECDOrganisation for Economic Co-operation and DevelopmentOELOccupational Exposure LimitPBTPersistent Bioaccumulative ToxicPNECPredicted No-Effect Concentration
Gurit Kerdyn, Gurit Kerdyn Green, Gurit Kerdyn Green FR
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
7/12/2021 (Revision date)EN (English US) 8/8
Abbreviations and acronymsRIDRegulations concerning the International Carriage of Dangerous Goods by RailSDSSafety Data SheetSTPSewage treatment plantThODTheoretical oxygen demand (ThOD)TLMMedian Tolerance LimitVOCVolatile Organic CompoundsCAS-No.Chemical Abstract Service numberN.O.S.Not Otherwise SpecifiedvPvBVery Persistent and Very BioaccumulativeEDEndocrine disrupting properties
Safety Data Sheet (SDS), USA
This information is based on our current knowledge and is intended to describe the product for the purposes of health, safety and environmental
requirements only. It should not therefore be construed as guaranteeing any specific property of the product The information contained within this
document is Gurit copyright and any distribution or publication beyond the recipient’s organization is prohibited without Gurit’s prior written consent.
by | Sep 27, 2025
Gurit Kerdyn, Gurit Kerdyn Green, Gurit Kerdyn
Green FR
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
Issue date: 2/15/2021 Revision date: 7/12/2021 Supersedes: 2/15/2021 Version: 2.0
7/12/2021 (Revision date)EN (English US) 1/8
SECTION 1: Identification
1.1. Identification
Product form
:Article
Name
:Gurit Kerdyn, Gurit Kerdyn Green, Gurit Kerdyn Green FR
Synonyms
:polyethylene terephthalate polymer (PET)
1.2. Recommended use and restrictions on use
Recommended use
:The product is intended for professional use
1.3. Supplier
Gurit (USA) Inc
115 Broadcommon Road
Rhode Island, 2809 – USA
T +1 401 396 5008 (All Technical and Commercial Enquiries)
marine-na@gurit.com – www.Gurit.com
Manufacturer
Gurit (Italy) s.r.l
Via Torino , 105
Volpiano (TO), 10088
T +39 11 995 28 81 – F +39 11 995 36 02
Regulatory@gurit.com – www.gurit.com
1.4. Emergency telephone number
Emergency number
:Carechem 24: +1 646 844 7309
Carechem 24 (Toll Free): +1 866 928 0789
Telephone number for use in case of chemical exposure, spillage or fire only.
SECTION 2: Hazard(s) identification
2.1. Classification of the substance or mixture
GHS US classification
Combustible Dust
May form combustible dust concentrations in air
Full text of H statements : see section 16
2.2. GHS Label elements, including precautionary statements
GHS US labeling
Signal word (GHS US)
:Warning
Hazard statements (GHS US)
:May form combustible dust concentrations in air
2.3. Other hazards which do not result in classification
Other hazards which do not result in classification
:Machining: Hazardous vapors may be released.
2.4. Unknown acute toxicity (GHS US)
Not applicable
SECTION 3: Composition/Information on ingredients
3.1. Substances
Not applicable
Gurit Kerdyn, Gurit Kerdyn Green, Gurit Kerdyn Green FR
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
7/12/2021 (Revision date)EN (English US) 2/83.2. Mixtures
Comments
:Use of blowing agents in manufacture of foam: Cyclopentane
This mixture does not contain any substances to be mentioned according to the criteria of section 3.2 of HazCom 2012
SECTION 4: First-aid measures
4.1. Description of first aid measures
First-aid measures after inhalation
:Remove person to fresh air and keep comfortable for breathing.
First-aid measures after skin contact
:Wash skin with plenty of water.
First-aid measures after eye contact
:Rinse eyes with water as a precaution.
First-aid measures after ingestion
:Call a poison center/doctor/physician if you feel unwell.
4.2. Most important symptoms and effects (acute and delayed)
No additional information available
4.3. Immediate medical attention and special treatment, if necessary
Treat symptomatically.
SECTION 5: Fire-fighting measures
5.1. Suitable (and unsuitable) extinguishing media
Suitable extinguishing media
:Water spray. Dry powder. Foam. Carbon dioxide.
5.2. Specific hazards arising from the chemical
Hazardous decomposition products in case of fire
:Toxic fumes may be released.
5.3. Special protective equipment and precautions for fire-fighters
Protection during firefighting
:Do not attempt to take action without suitable protective equipment. Self-contained breathing
apparatus. Complete protective clothing.
SECTION 6: Accidental release measures
6.1. Personal precautions, protective equipment and emergency procedures
6.1.1. For non-emergency personnel
Emergency procedures
:Ventilate spillage area.
6.1.2. For emergency responders
Protective equipment
:For further information refer to section 8: “Exposure controls/personal protection”.
6.2. Environmental precautions
Avoid release to the environment.
6.3. Methods and material for containment and cleaning up
Methods for cleaning up
:Mechanically recover the product.
Other information
:No special measures required.
6.4. Reference to other sections
For further information refer to section 13.
Gurit Kerdyn, Gurit Kerdyn Green, Gurit Kerdyn Green FR
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
7/12/2021 (Revision date)EN (English US) 3/8
SECTION 7: Handling and storage
7.1. Precautions for safe handling
Precautions for safe handling
:Ensure good ventilation of the work station. Wear personal protective equipment.
Hygiene measures
:Do not eat, drink or smoke when using this product. Always wash hands after handling the
product.
7.2. Conditions for safe storage, including any incompatibilities
Storage conditions
:Store in a well-ventilated place. Keep cool.
SECTION 8: Exposure controls/personal protection
8.1. Control parameters
Gurit Kerdyn, Gurit Kerdyn Green, Gurit Kerdyn Green FR USA – OSHA – Occupational Exposure LimitsLocal nameTotal Dust (Inert or Nuisance Dust)OSHA PEL (TWA) [1]15 mg/m OSHA PEL (TWA) [2]50 mppcfRegulatory reference (US-OSHA)OSHA Annotated Table Z-3 Mineral Dusts
8.2. Appropriate engineering controls
Appropriate engineering controls
:Ensure good ventilation of the work station.
Environmental exposure controls
:Avoid release to the environment.
8.3. Individual protection measures/Personal protective equipment
Hand protection:Protective glovesEye protection:Safety glassesSkin and body protection:Wear suitable protective clothingRespiratory protection:In case of insufficient ventilation, wear suitable respiratory equipment
Personal protective equipment symbol(s):
Gurit Kerdyn, Gurit Kerdyn Green, Gurit Kerdyn Green FR
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
7/12/2021 (Revision date)EN (English US) 4/8
SECTION 9: Physical and chemical properties
9.1. Information on basic physical and chemical properties
Physical state
:Solid
Appearance
:Structural Foam.
Color
:Variable
Odor
:mild
Odor threshold
:No data available
pH
:No data available
Melting point
:> 220 C
Freezing point
:Not applicable
Boiling point
:No data available
Flash point
:Not applicable
Relative evaporation rate (butyl acetate=1)
:No data available
Flammability (solid, gas)
:Non flammable.
Vapor pressure
:No data available
Vapor pressure at 50 C
:Not applicable
Relative vapor density at 20 C
:No data available
Relative density
:No data available
Density
:85 300 kg/m
Solubility
:Insoluble.
Partition coefficient n-octanol/water (Log Pow)
:No data available
Auto-ignition temperature
:Not applicable
Decomposition temperature
:> 300 C
Viscosity, kinematic
:Not applicable
Viscosity, dynamic
:No data available
Explosion limits
:Not applicable
Explosive properties
:No data available
Oxidizing properties
:No data available
9.2. Other information
No additional information available
SECTION 10: Stability and reactivity
10.1. Reactivity
The product is non-reactive under normal conditions of use, storage and transport.
10.2. Chemical stability
Stable under normal conditions.
10.3. Possibility of hazardous reactions
No dangerous reactions known under normal conditions of use.
10.4. Conditions to avoid
None under recommended storage and handling conditions (see section 7).
10.5. Incompatible materials
No additional information available
10.6. Hazardous decomposition products
Under normal conditions of storage and use, hazardous decomposition products should not be produced.
Gurit Kerdyn, Gurit Kerdyn Green, Gurit Kerdyn Green FR
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
7/12/2021 (Revision date)EN (English US) 5/8
SECTION 11: Toxicological information
11.1. Information on toxicological effects
Acute toxicity (oral)
:Not classified
Acute toxicity (dermal)
:Not classified
Acute toxicity (inhalation)
:Not classified
Skin corrosion/irritation
:Not classified
Serious eye damage/irritation
:Not classified
Respiratory or skin sensitization
:Not classified
Germ cell mutagenicity
:Not classified
Carcinogenicity
:Not classified
Reproductive toxicity
:Not classified
STOT-single exposure
:Not classified
STOT-repeated exposure
:Not classified
Aspiration hazard
:Not classified
Viscosity, kinematic
:Not applicable
SECTION 12: Ecological information
12.1. Toxicity
Ecology – general
:The product is not considered harmful to aquatic organisms or to cause long-term adverse
effects in the environment.
12.2. Persistence and degradability
No additional information available
12.3. Bioaccumulative potential
No additional information available
12.4. Mobility in soil
No additional information available
12.5. Other adverse effects
No additional information available
SECTION 13: Disposal considerations
13.1. Disposal methods
Waste treatment methods
:Dispose of contents/container in accordance with licensed collector s sorting instructions.
SECTION 14: Transport information
In accordance with Department of Transport / IMDG / IATA
DOTIMDGIATA14.1. UN numberNot regulated for transport14.2. Proper Shipping NameNot applicableNot applicableNot applicable
Gurit Kerdyn, Gurit Kerdyn Green, Gurit Kerdyn Green FR
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
7/12/2021 (Revision date)EN (English US) 6/8DOTIMDGIATA14.3. Transport hazard class(es)Not applicableNot applicableNot applicable14.4. Packing group Not applicableNot applicableNot applicable14.5. Environmental hazardsNot applicableNot applicableNot applicableNo supplementary information available
14.6. Special precautions for user
DOT
No data available
IMDG
No data available
IATA
No data available
14.7. Transport in bulk according to Annex II of MARPOL 73/78 and the IBC Code
Not applicable
SECTION 15: Regulatory information
15.1. US Federal regulations
All components of this product are listed as Active, or excluded from listing, on the United States Environmental Protection Agency Toxic Substances
Control Act (TSCA) inventory
This product or mixture is not known to contain a toxic chemical or chemicals in excess of the applicable de minimis concentration as specified in 40
CFR 372.38(a) subject to the reporting requirements of section 313 of Title III of the Superfund Amendments and Reauthorization Act of 1986 and 40
CFR Part 372.
15.2. International regulations
CANADA
No additional information available
EU-Regulations
No additional information available
National regulations
No additional information available
15.3. US State regulations
Gurit Kerdyn, Gurit Kerdyn Green, Gurit Kerdyn Green FR U.S. – California – Proposition 65 – Carcinogens ListYesU.S. – California – Proposition 65 – Developmental
Toxicity
No
Gurit Kerdyn, Gurit Kerdyn Green, Gurit Kerdyn Green FR
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
7/12/2021 (Revision date)EN (English US) 7/8Gurit Kerdyn, Gurit Kerdyn Green, Gurit Kerdyn Green FR U.S. – California – Proposition 65 – Reproductive
Toxicity – Female
NoU.S. – California – Proposition 65 – Reproductive
Toxicity – Male
No
California Proposition 65 – This product does not contain any substances known to the state of California to cause cancer, developmental and/or
reproductive harm
SECTION 16: Other information
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
Revision date
:07/12/2021
Abbreviations and acronymsADNEuropean Agreement concerning the International Carriage of Dangerous Goods by Inland WaterwaysADREuropean Agreement concerning the International Carriage of Dangerous Goods by RoadATEAcute Toxicity EstimateBCFBioconcentration factorBLVBiological limit valueBODBiochemical oxygen demand (BOD)CODChemical oxygen demand (COD)DMELDerived Minimal Effect levelDNELDerived-No Effect LevelEC-No.European Community numberEC50Median effective concentrationENEuropean StandardIARCInternational Agency for Research on CancerIATAInternational Air Transport AssociationIMDGInternational Maritime Dangerous GoodsLC50Median lethal concentrationLD50Median lethal doseLOAELLowest Observed Adverse Effect LevelNOAECNo-Observed Adverse Effect ConcentrationNOAELNo-Observed Adverse Effect LevelNOECNo-Observed Effect ConcentrationOECDOrganisation for Economic Co-operation and DevelopmentOELOccupational Exposure LimitPBTPersistent Bioaccumulative ToxicPNECPredicted No-Effect Concentration
Gurit Kerdyn, Gurit Kerdyn Green, Gurit Kerdyn Green FR
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
7/12/2021 (Revision date)EN (English US) 8/8
Abbreviations and acronymsRIDRegulations concerning the International Carriage of Dangerous Goods by RailSDSSafety Data SheetSTPSewage treatment plantThODTheoretical oxygen demand (ThOD)TLMMedian Tolerance LimitVOCVolatile Organic CompoundsCAS-No.Chemical Abstract Service numberN.O.S.Not Otherwise SpecifiedvPvBVery Persistent and Very BioaccumulativeEDEndocrine disrupting properties
Safety Data Sheet (SDS), USA
This information is based on our current knowledge and is intended to describe the product for the purposes of health, safety and environmental
requirements only. It should not therefore be construed as guaranteeing any specific property of the product The information contained within this
document is Gurit copyright and any distribution or publication beyond the recipient’s organization is prohibited without Gurit’s prior written consent.
by | Sep 27, 2025
Gurit Kerdyn, Gurit Kerdyn Green, Gurit Kerdyn
Green FR
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
Issue date: 2/15/2021 Revision date: 7/12/2021 Supersedes: 2/15/2021 Version: 2.0
7/12/2021 (Revision date)EN (English US) 1/8
SECTION 1: Identification
1.1. Identification
Product form
:Article
Name
:Gurit Kerdyn, Gurit Kerdyn Green, Gurit Kerdyn Green FR
Synonyms
:polyethylene terephthalate polymer (PET)
1.2. Recommended use and restrictions on use
Recommended use
:The product is intended for professional use
1.3. Supplier
Gurit (USA) Inc
115 Broadcommon Road
Rhode Island, 2809 – USA
T +1 401 396 5008 (All Technical and Commercial Enquiries)
marine-na@gurit.com – www.Gurit.com
Manufacturer
Gurit (Italy) s.r.l
Via Torino , 105
Volpiano (TO), 10088
T +39 11 995 28 81 – F +39 11 995 36 02
Regulatory@gurit.com – www.gurit.com
1.4. Emergency telephone number
Emergency number
:Carechem 24: +1 646 844 7309
Carechem 24 (Toll Free): +1 866 928 0789
Telephone number for use in case of chemical exposure, spillage or fire only.
SECTION 2: Hazard(s) identification
2.1. Classification of the substance or mixture
GHS US classification
Combustible Dust
May form combustible dust concentrations in air
Full text of H statements : see section 16
2.2. GHS Label elements, including precautionary statements
GHS US labeling
Signal word (GHS US)
:Warning
Hazard statements (GHS US)
:May form combustible dust concentrations in air
2.3. Other hazards which do not result in classification
Other hazards which do not result in classification
:Machining: Hazardous vapors may be released.
2.4. Unknown acute toxicity (GHS US)
Not applicable
SECTION 3: Composition/Information on ingredients
3.1. Substances
Not applicable
Gurit Kerdyn, Gurit Kerdyn Green, Gurit Kerdyn Green FR
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
7/12/2021 (Revision date)EN (English US) 2/83.2. Mixtures
Comments
:Use of blowing agents in manufacture of foam: Cyclopentane
This mixture does not contain any substances to be mentioned according to the criteria of section 3.2 of HazCom 2012
SECTION 4: First-aid measures
4.1. Description of first aid measures
First-aid measures after inhalation
:Remove person to fresh air and keep comfortable for breathing.
First-aid measures after skin contact
:Wash skin with plenty of water.
First-aid measures after eye contact
:Rinse eyes with water as a precaution.
First-aid measures after ingestion
:Call a poison center/doctor/physician if you feel unwell.
4.2. Most important symptoms and effects (acute and delayed)
No additional information available
4.3. Immediate medical attention and special treatment, if necessary
Treat symptomatically.
SECTION 5: Fire-fighting measures
5.1. Suitable (and unsuitable) extinguishing media
Suitable extinguishing media
:Water spray. Dry powder. Foam. Carbon dioxide.
5.2. Specific hazards arising from the chemical
Hazardous decomposition products in case of fire
:Toxic fumes may be released.
5.3. Special protective equipment and precautions for fire-fighters
Protection during firefighting
:Do not attempt to take action without suitable protective equipment. Self-contained breathing
apparatus. Complete protective clothing.
SECTION 6: Accidental release measures
6.1. Personal precautions, protective equipment and emergency procedures
6.1.1. For non-emergency personnel
Emergency procedures
:Ventilate spillage area.
6.1.2. For emergency responders
Protective equipment
:For further information refer to section 8: “Exposure controls/personal protection”.
6.2. Environmental precautions
Avoid release to the environment.
6.3. Methods and material for containment and cleaning up
Methods for cleaning up
:Mechanically recover the product.
Other information
:No special measures required.
6.4. Reference to other sections
For further information refer to section 13.
Gurit Kerdyn, Gurit Kerdyn Green, Gurit Kerdyn Green FR
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
7/12/2021 (Revision date)EN (English US) 3/8
SECTION 7: Handling and storage
7.1. Precautions for safe handling
Precautions for safe handling
:Ensure good ventilation of the work station. Wear personal protective equipment.
Hygiene measures
:Do not eat, drink or smoke when using this product. Always wash hands after handling the
product.
7.2. Conditions for safe storage, including any incompatibilities
Storage conditions
:Store in a well-ventilated place. Keep cool.
SECTION 8: Exposure controls/personal protection
8.1. Control parameters
Gurit Kerdyn, Gurit Kerdyn Green, Gurit Kerdyn Green FR USA – OSHA – Occupational Exposure LimitsLocal nameTotal Dust (Inert or Nuisance Dust)OSHA PEL (TWA) [1]15 mg/m OSHA PEL (TWA) [2]50 mppcfRegulatory reference (US-OSHA)OSHA Annotated Table Z-3 Mineral Dusts
8.2. Appropriate engineering controls
Appropriate engineering controls
:Ensure good ventilation of the work station.
Environmental exposure controls
:Avoid release to the environment.
8.3. Individual protection measures/Personal protective equipment
Hand protection:Protective glovesEye protection:Safety glassesSkin and body protection:Wear suitable protective clothingRespiratory protection:In case of insufficient ventilation, wear suitable respiratory equipment
Personal protective equipment symbol(s):
Gurit Kerdyn, Gurit Kerdyn Green, Gurit Kerdyn Green FR
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
7/12/2021 (Revision date)EN (English US) 4/8
SECTION 9: Physical and chemical properties
9.1. Information on basic physical and chemical properties
Physical state
:Solid
Appearance
:Structural Foam.
Color
:Variable
Odor
:mild
Odor threshold
:No data available
pH
:No data available
Melting point
:> 220 C
Freezing point
:Not applicable
Boiling point
:No data available
Flash point
:Not applicable
Relative evaporation rate (butyl acetate=1)
:No data available
Flammability (solid, gas)
:Non flammable.
Vapor pressure
:No data available
Vapor pressure at 50 C
:Not applicable
Relative vapor density at 20 C
:No data available
Relative density
:No data available
Density
:85 300 kg/m
Solubility
:Insoluble.
Partition coefficient n-octanol/water (Log Pow)
:No data available
Auto-ignition temperature
:Not applicable
Decomposition temperature
:> 300 C
Viscosity, kinematic
:Not applicable
Viscosity, dynamic
:No data available
Explosion limits
:Not applicable
Explosive properties
:No data available
Oxidizing properties
:No data available
9.2. Other information
No additional information available
SECTION 10: Stability and reactivity
10.1. Reactivity
The product is non-reactive under normal conditions of use, storage and transport.
10.2. Chemical stability
Stable under normal conditions.
10.3. Possibility of hazardous reactions
No dangerous reactions known under normal conditions of use.
10.4. Conditions to avoid
None under recommended storage and handling conditions (see section 7).
10.5. Incompatible materials
No additional information available
10.6. Hazardous decomposition products
Under normal conditions of storage and use, hazardous decomposition products should not be produced.
Gurit Kerdyn, Gurit Kerdyn Green, Gurit Kerdyn Green FR
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
7/12/2021 (Revision date)EN (English US) 5/8
SECTION 11: Toxicological information
11.1. Information on toxicological effects
Acute toxicity (oral)
:Not classified
Acute toxicity (dermal)
:Not classified
Acute toxicity (inhalation)
:Not classified
Skin corrosion/irritation
:Not classified
Serious eye damage/irritation
:Not classified
Respiratory or skin sensitization
:Not classified
Germ cell mutagenicity
:Not classified
Carcinogenicity
:Not classified
Reproductive toxicity
:Not classified
STOT-single exposure
:Not classified
STOT-repeated exposure
:Not classified
Aspiration hazard
:Not classified
Viscosity, kinematic
:Not applicable
SECTION 12: Ecological information
12.1. Toxicity
Ecology – general
:The product is not considered harmful to aquatic organisms or to cause long-term adverse
effects in the environment.
12.2. Persistence and degradability
No additional information available
12.3. Bioaccumulative potential
No additional information available
12.4. Mobility in soil
No additional information available
12.5. Other adverse effects
No additional information available
SECTION 13: Disposal considerations
13.1. Disposal methods
Waste treatment methods
:Dispose of contents/container in accordance with licensed collector s sorting instructions.
SECTION 14: Transport information
In accordance with Department of Transport / IMDG / IATA
DOTIMDGIATA14.1. UN numberNot regulated for transport14.2. Proper Shipping NameNot applicableNot applicableNot applicable
Gurit Kerdyn, Gurit Kerdyn Green, Gurit Kerdyn Green FR
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
7/12/2021 (Revision date)EN (English US) 6/8DOTIMDGIATA14.3. Transport hazard class(es)Not applicableNot applicableNot applicable14.4. Packing group Not applicableNot applicableNot applicable14.5. Environmental hazardsNot applicableNot applicableNot applicableNo supplementary information available
14.6. Special precautions for user
DOT
No data available
IMDG
No data available
IATA
No data available
14.7. Transport in bulk according to Annex II of MARPOL 73/78 and the IBC Code
Not applicable
SECTION 15: Regulatory information
15.1. US Federal regulations
All components of this product are listed as Active, or excluded from listing, on the United States Environmental Protection Agency Toxic Substances
Control Act (TSCA) inventory
This product or mixture is not known to contain a toxic chemical or chemicals in excess of the applicable de minimis concentration as specified in 40
CFR 372.38(a) subject to the reporting requirements of section 313 of Title III of the Superfund Amendments and Reauthorization Act of 1986 and 40
CFR Part 372.
15.2. International regulations
CANADA
No additional information available
EU-Regulations
No additional information available
National regulations
No additional information available
15.3. US State regulations
Gurit Kerdyn, Gurit Kerdyn Green, Gurit Kerdyn Green FR U.S. – California – Proposition 65 – Carcinogens ListYesU.S. – California – Proposition 65 – Developmental
Toxicity
No
Gurit Kerdyn, Gurit Kerdyn Green, Gurit Kerdyn Green FR
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
7/12/2021 (Revision date)EN (English US) 7/8Gurit Kerdyn, Gurit Kerdyn Green, Gurit Kerdyn Green FR U.S. – California – Proposition 65 – Reproductive
Toxicity – Female
NoU.S. – California – Proposition 65 – Reproductive
Toxicity – Male
No
California Proposition 65 – This product does not contain any substances known to the state of California to cause cancer, developmental and/or
reproductive harm
SECTION 16: Other information
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
Revision date
:07/12/2021
Abbreviations and acronymsADNEuropean Agreement concerning the International Carriage of Dangerous Goods by Inland WaterwaysADREuropean Agreement concerning the International Carriage of Dangerous Goods by RoadATEAcute Toxicity EstimateBCFBioconcentration factorBLVBiological limit valueBODBiochemical oxygen demand (BOD)CODChemical oxygen demand (COD)DMELDerived Minimal Effect levelDNELDerived-No Effect LevelEC-No.European Community numberEC50Median effective concentrationENEuropean StandardIARCInternational Agency for Research on CancerIATAInternational Air Transport AssociationIMDGInternational Maritime Dangerous GoodsLC50Median lethal concentrationLD50Median lethal doseLOAELLowest Observed Adverse Effect LevelNOAECNo-Observed Adverse Effect ConcentrationNOAELNo-Observed Adverse Effect LevelNOECNo-Observed Effect ConcentrationOECDOrganisation for Economic Co-operation and DevelopmentOELOccupational Exposure LimitPBTPersistent Bioaccumulative ToxicPNECPredicted No-Effect Concentration
Gurit Kerdyn, Gurit Kerdyn Green, Gurit Kerdyn Green FR
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
7/12/2021 (Revision date)EN (English US) 8/8
Abbreviations and acronymsRIDRegulations concerning the International Carriage of Dangerous Goods by RailSDSSafety Data SheetSTPSewage treatment plantThODTheoretical oxygen demand (ThOD)TLMMedian Tolerance LimitVOCVolatile Organic CompoundsCAS-No.Chemical Abstract Service numberN.O.S.Not Otherwise SpecifiedvPvBVery Persistent and Very BioaccumulativeEDEndocrine disrupting properties
Safety Data Sheet (SDS), USA
This information is based on our current knowledge and is intended to describe the product for the purposes of health, safety and environmental
requirements only. It should not therefore be construed as guaranteeing any specific property of the product The information contained within this
document is Gurit copyright and any distribution or publication beyond the recipient’s organization is prohibited without Gurit’s prior written consent.
