29MC932R_TDS.pdf
PRODUCT DATASHEET
For more information and technical assistance contact Phillips 66 COPYLENE
Polypropylene at www.COPYLENE.com.
COPYLENE
CR350CS-01
Random Copolymer
Potential Applications: Product Description
COPYLENE
CR350CS-01 is a clarified, reactor grade, random
copolymer specially designed for clear injection molding appli-
cations and is formulated with lube for excellent mold release
for larger articles.
Typical Properties Method Value Unit
Physical
Melt Flow Rate (230 C/2.16kg) ASTM D 1238 35 g/10 min
Density Specific Gravity ASTM D 792 0.902 sp gr
Mechanical
Tensile Strength @ Yield
(2 in/min)
(50 mm/min)
ASTM D 638
4250 psi
29.3 MPa
Flexural Modulus
(0.05 in/min, 1% Secant, Procedure A)
(1 mm/min, 1% Secant, Procedure A)
ASTM D 790
155000 psi
1068 MPa
Tensile Elongation @Yld ASTM D 638 13.5%
Impact
Notched izod impact
(73 F, Method A)
(23 C, Method A)
ASTM D 256
1.0 ft-lb/in
53 J/m
DTUL @66psi Unannealed ASTM D 648 74 C
Product Properties
For regulatory compliance information, see COPYLENE
CR350CS-01 Product Stewardship Information Sheet. MSDS available upon request, or on our Web site at
www.COPYLENE.com. The product specifications are nominal properties and do not reflect normal testing variance and should not be used for specification
purposes.
Revision Date November 2012
COPYLENE
Injection Molding
CSB 12-3120
Before using this product, the user is advised and cautioned to make its own determination and assessment of
the safety and suitability of the product for the specific use in question and is further advised against relying on
the information contained herein as it may relate to any specific use or application. It is the ultimate responsibility
of the user to ensure that the product is suited and the information is applicable to the user s specific application.
Phillips 66 Company does not make, and expressly disclaims, all warranties, including warranties of merchant-
ability or fitness for a particular purpose, regardless of whether oral or written, express or implied, or allegedly
arising from any usage of any trade or from any course of dealing in connection with the use of the information
contained herein or the product itself. The user expressly assumes all risk and liability, whether based in contract,
tort or otherwise, in connection with the use of the information contained herein or the product itself. Further, in-
formation contained herein is given without reverence to any intellectual property issues, as well as federal, state
or local laws which may be encountered in the use thereof. Such questions should be investigated by the user.
PHILLIPS 66
, PHILLIPS 66
Shield, COPYLENE
and other trademarks displayed herein are registered trademarks of Phillips 66
Company or one of its subsidiaries.
29MC932R_BK_TDS.pdf
29MC916_TDS.pdf
29MC932L_TDS.pdf
29MC916R_TDS.pdf
PRODUCT DATASHEET
For more information and technical assistance contact Phillips 66 COPYLENE
Polypropylene at www.COPYLENE.com.
COPYLENE
CR350CS-01
Random Copolymer
Potential Applications: Product Description
COPYLENE
CR350CS-01 is a clarified, reactor grade, random
copolymer specially designed for clear injection molding appli-
cations and is formulated with lube for excellent mold release
for larger articles.
Typical Properties Method Value Unit
Physical
Melt Flow Rate (230 C/2.16kg) ASTM D 1238 35 g/10 min
Density Specific Gravity ASTM D 792 0.902 sp gr
Mechanical
Tensile Strength @ Yield
(2 in/min)
(50 mm/min)
ASTM D 638
4250 psi
29.3 MPa
Flexural Modulus
(0.05 in/min, 1% Secant, Procedure A)
(1 mm/min, 1% Secant, Procedure A)
ASTM D 790
155000 psi
1068 MPa
Tensile Elongation @Yld ASTM D 638 13.5%
Impact
Notched izod impact
(73 F, Method A)
(23 C, Method A)
ASTM D 256
1.0 ft-lb/in
53 J/m
DTUL @66psi Unannealed ASTM D 648 74 C
Product Properties
For regulatory compliance information, see COPYLENE
CR350CS-01 Product Stewardship Information Sheet. MSDS available upon request, or on our Web site at
www.COPYLENE.com. The product specifications are nominal properties and do not reflect normal testing variance and should not be used for specification
purposes.
Revision Date November 2012
COPYLENE
Injection Molding
CSB 12-3120
Before using this product, the user is advised and cautioned to make its own determination and assessment of
the safety and suitability of the product for the specific use in question and is further advised against relying on
the information contained herein as it may relate to any specific use or application. It is the ultimate responsibility
of the user to ensure that the product is suited and the information is applicable to the user s specific application.
Phillips 66 Company does not make, and expressly disclaims, all warranties, including warranties of merchant-
ability or fitness for a particular purpose, regardless of whether oral or written, express or implied, or allegedly
arising from any usage of any trade or from any course of dealing in connection with the use of the information
contained herein or the product itself. The user expressly assumes all risk and liability, whether based in contract,
tort or otherwise, in connection with the use of the information contained herein or the product itself. Further, in-
formation contained herein is given without reverence to any intellectual property issues, as well as federal, state
or local laws which may be encountered in the use thereof. Such questions should be investigated by the user.
PHILLIPS 66
, PHILLIPS 66
Shield, COPYLENE
and other trademarks displayed herein are registered trademarks of Phillips 66
Company or one of its subsidiaries.
29MC916R_BK.pdf
29MC916L_TDS.pdf
29MC1651_TDS.pdf
DESCRIPTION:
COMPATIBLE LIDS:
ITEM NUMBERS
WITH DESCRIPTION:
RESIN:
PRINT AREA:
LABEL SIZE:
VOLUME: (Brimfull)16.4 fl. oz. 485ml
QDSL122 – Rev. D – 1/19/2017
Revision Date and History:
9-25-2019 – New Product
SHIPPING PALLET CONFIGURATION
Standard pallet quantity
may change at time of shipment.
AVERAGE PART WEIGHT: 16.7 g
Note: The above information has been provided in
good faith. However, we will not be held responsible
for errors resulting in the utilization of this
information. This document is subject to change at
any time. Please verify the accuracy of this
information with your Sales Representative at time of
utilization.
6110 Abbott Drive, Omaha, NE 68110-2805
P.O. Box 8400, Omaha, NE 68108-0400
Phone: 402-341-7300 | 800-228-9545
Fax: 402-346-2509
www.airliteplastics.com
PALLET HEIGHT: 97″
PARTS PER PALLET: 15,000
CARTONS PER PALLET:
CARTONS PER LAYER: 6
1651B
309 Diameter – 16 oz. PP Cup
PRODUCT INFORMATION SHEET
500
Vertical
18.9 lbs.
20 stacks of 25
Polypropylene (PP)
PACKAGING SPECIFICATIONS
L309 – LLDPE Flat Lid
L309RA – LLDPE Recessed Lid
L309H – PP Lid with Breathable Holes
L309i – PP IML Flat Lid
C016C501CB – 01C White Freezer Grade
C016C500FB – 00F Natural Freezer Grade
2-5/8″ x 10″
LENGTH
19.00″
WIDTH
15.31″
HEIGHT
18.25″
Front or Back: 2-5/8″ x 3-3/4″
CARTON CONFIGURATION
NUMBER OF LAYERS: 5
30
PARTS PER CARTON:
PARTS / STACKS:
CARTON WEIGHT:
STACK ORIENTATION:
29MC1651WT_TDS.pdf
PRODUCT INFORMATION SHEET
Standard pallet quantity may change
at shipment.
SHIPPING PALLET
CONFIGURATION
CARTON CONFIGURATION
AVERAGE PART WEIGHT: 14.5 g
DESCRIPTION: 16 oz PP Cup – 408 Diameter
COMPATIBLE LIDS: L408 Flat Lid – L408N Flat Lid – L408R Recessed Lid
ITEM NUMBER / DESCRIPTION:
RESIN: Polypropylene
PRINT AREA: 2-1/8″ X 12-1/8″
LABEL SIZE: Front or Back: 2-1/8″ X 4-1/2″
VOLUME: (Brimfull): 18.6 fl. oz. 550 ml.
W
L
H
24.3 ” 19.3 ” 17.6 ”
LENGTH: WIDTH: HEIGHT:
PARTS / CARTON: 1,000
PARTS / STACK: 20 of 50
CARTON WEIGHT: 32.5 lbs
STACK ORIENTATION: Vertical
PACKAGING SPECIFICATIONS
CARTONS / LAYER: 4
NUMBER OF LAYERS: 5
CARTONS / PALLET: 20
PALLET HEIGHT: 94”
PARTS / PALLET: 20,000
C016Z500F – 00F Natural Freezer Grade
C016Z501C – 01C White Non-Freezer Grade
C016Z501C-C – 01C-C White Freezer Grade
Z1651
Note: The above information has been provided in good faith,
however, we will not be held responsible for errors resulting in the
utilization of this information. This document is subject to change
at any time. Please verify the accuracy of this information with
your Sales Representative at time of Utilization.
6110 Abbott Drive, Omaha, NE 68110-2805
P.O. Box 1649 Omaha, NE 68101-1649
Phone: (402) 341-7300 (800) 228-9545
Fax: (402) 346-2509
www.airliteplastics.com
QD121
Date issued: July 13, 2005
Revised: