37FK700-NC_TDS.pdf

by | Sep 27, 2025

TechnicalDataSheet

LOCTITE

FREKOTE700-NC
Knownas700-NC
January-2015

PRODUCTDESCRIPTION
LOCTITE

FREKOTE 700-NC providesthefollowing
productcharacteristics:
Technology MoldRelease
Appearance Clear,colorless
LMS
ChemicalType SolventBasedPolymer
Odor Solvent
Cure Romtemperaturecure
CuredThermalStability 400 C
Application ReleaseCoatings
ApplicationTemperature13 to135 C
SpecificBenefit Nochlorinatedsolvents
Highglossfinish
Highslip
Nocontaminatingtransfer
Nomoldbuild-up
LOCTITE

FREKOTE 700-NC offersexcellentrelease
propertiesforthemostdemandingapplicationsandisagreat
all-purposereleaseagent.LOCTITE

FREKOTE700-NC
releasesepoxies,polyesterresins,thermoplastics,rubber
comp ndsandmostothermoldedpolymers.
TYPICALPROPERTIESOFUNCUREDMATERIAL
SpecificGravity@ 25 C 0.755 to0.764
LMS
FlashPoint-SeeSDS
GENERALINFORMATION
Thisproductisnotrecommendedforuseinpureoxygen
and/oroxygenrichsystemsandshouldnotbeselectedas
asealantforchlorineorotherstrongoxidizing materials.
Forsafehandlinginformationonthisproduct,consultthe
SafetyDataSheet(SDS).
MoldPreparation
Cleaning:
Moldsurfacesmustbethor ghlycleanedanddried.Alltraces
ofpriorreleasemustberemoved.Thismaybeaccomplished
byusing Frekote

PMCorothersuitablecleaner. Frekote

915WB orlightabrasivescanbeusedforheavybuild-up.

SealingNew/RepairedMolds:
Occasionally,greenorfreshlyrepairedmoldsarerushedinto
servicepriortocompletecurecausinganincreasedam ntof
freestyreneonthemoldsurface.Freshor”productionline”
repairs,newfiberglassandepoxymoldssh ldbecuredper
manufacturer’sinstructions,usuallyaminimumof2-3weeks
at22 Cbeforestartingfull-scaleproduction.Fullycured
previ slyunusedmoldssh ldbesealedbeforeuse.This
canbeaccomplishedbyapplyingonetotwocoatsof an
appropriate Frekote

moldsealer, followingthedirectionsfor
useinstructions. AllowfullcureoftheappropriateFrekote

moldsealerbeforey applythefirstcoatofLOCTITE

FREKOTE700-NC as tlinedinthedirectionsofuse.
Directionsforuse:
1.LOCTITE

FREKOTE700-NC canbeappliedtomold
surfacesatromtemperatureupto135 Cbyspraying,
brushingorwipingwithacleanlint-free,cloth.When
sprayingensureadryairs rceisusedoruseanairless
spraysystem.Alwaysuseinawellventilatedarea.
2.Wipeorsprayonasmoth,thin,continu s,wet
film. Avoidwipingorsprayingoverthesameareathat
wasjustcoateduntilthesolventhasevaporated.If
spraying,holdnozzle20 to30cmfrommoldsurface.Itis
suggestedthatsmallareasbecoated,working
progressivelyfromonesideofthemoldtotheother.
3.Initially,apply2 to3basecoatsallowing5 to10 minutes
betweencoatsforsolventevaporation .
4.Allowthefinalcoattocurefor15 to20minutesat22 C.
5.Maximumreleaseswillbeobtainedasthemoldsurface
becomesconditionedtoLOCTITE

FREKOTE700-NC
. Performancecanbe enhancedbyre-coatingonce,after
thefirstfewinitialpulls.
6.Whenanyreleasedifficultyisexperienced,theareain
questioncanbe”t ched-up”byre-coatingtheentire
moldsurfaceorjustthoseareaswherereleasedifficultyis
occurring.
7.NOTE: LOCTITE

FREKOTE700-NC ismoisture
sensitive,keepcontainertightlyclosedwhennotinuse.
Theproductsh ldalwaysbeusedinawellventilated
area.
8.Precaution: Usersofclosedmoldsystems(rotomolding)
mustbecertainthatsolventevaporationiscompleteand
thatallsolventvaporshavebeenventilatedfromthemold
cavitypriortoclosingthemold.Anoil-freecompressedair
s rcecanbeusedtoassistinevaporationofsolvents
andventilationofthemoldcavity.

TDSLOCTITE

FREKOTE700-NC , January-2015
MoldTouchup
T chupcoatssh ldonlybeappliedtoareaswherepor
releaseisnoticedandsh ldbeappliedusingthesame
methodasbasecoats.Thiswillreducethepossibilityof
releaseagentorpolymerbuild-up.Thefrequencyoft chups
willdependonthepolymertype,moldconfiguration,and
abrasionparameters.
LoctiteMaterialSpecification
LMS
LMSdated May-10,2006. Testreportsforeachbatchare
availablefortheindicatedproperties. LMStestreportsinclude
selectedQCtestparametersconsideredappropriateto
specificationsforcustomeruse. Additionally,comprehensive
controlsareinplacetoassureproductqualityand
consistency. Specialcustomerspecificationrequirementsmay
becordinatedthr ghHenkel Quality.
Storage
Theproductisclassifiedasflammableandmustbestoredin
anappropriatemannerincompliancewithrelevant
regulations. Donotstorenearoxidizingagentsorcombustible
materials. Storeproductintheunopenedcontainerinadry
location. Storageinformationmayalsobeindicatedonthe
productcontainerlabelling.
OptimalStorage: 8 Cto21 C. Storagebelow8 Cor
greaterthan28 Ccanadverselyaffectproductproperties.
Materialremovedfromcontainersmaybecontaminatedduring
use. Donotreturnproducttotheoriginalcontainer. Henkel
cannotassumeresponsibilityforproductwhichhasbeen
contaminatedorstoredunderconditionsotherthanthose
previ slyindicated. Ifadditionalinformationisrequired,
pleasecontacty rlocalTechnicalServiceCenteror
CustomerServiceRepresentive.
Conversions
( Cx1.8)+32= F
kV/mmx25.4=V/mil
mm/25.4=inches
m/25.4=mil
Nx0.225=lb
N/mmx5.71=lb/in
N/mm x145=psi
MPax145=psi
N m x 8.851= lb in
N mx0.738=lb ft
N mm x0.142=oz in
mPa s=cP
Note:
TheinformationprovidedinthisTechnicalDataSheet(TDS)includingthe
recommendationsforuseandapplicationoftheproductarebasedon r
knowledgeandexperienceoftheproductasatthedateofthisTDS.Theproduct
canhaveavarietyofdifferentapplicationsaswellasdifferingapplicationand
workingconditionsiny renvironmentthatarebeyond rcontrol.Henkelis,
therefore,notliableforthesuitabilityof rproductfortheproductionprocesses
andconditionsinrespectofwhichy usethem,aswellastheintended
applicationsandresults.Westronglyrecommendthaty carry ty rown
priortrialstoconfirmsuchsuitabilityof rproduct.
AnyliabilityinrespectoftheinformationintheTechnicalDataSheetoranyother
writtenororalrecommendation(s)regardingtheconcernedproductisexcluded,
exceptifotherwiseexplicitlyagreedandexceptinrelationtodeathorpersonal
injurycausedby rnegligenceandanyliabilityunderanyapplicablemandatory
productliabilitylaw.
IncaseproductsaredeliveredbyHenkelBelgiumNV,HenkelElectronic
MaterialsNV,HenkelNederlandBV,HenkelTechnologiesFranceSASand
HenkelFranceSApleaseadditionallynotethefollowing:
IncaseHenkelw ldbeneverthelessheldliable,onwhateverlegalgr nd,
Henkel sliabilitywillinnoeventexceedtheam ntoftheconcerneddelivery.
IncaseproductsaredeliveredbyHenkelColombiana,S.A.S.thefollowing
disclaimerisapplicable:
TheinformationprovidedinthisTechnicalDataSheet(TDS)includingthe
recommendationsforuseandapplicationoftheproductarebasedon r
knowledgeandexperienceoftheproductasatthedateofthisTDS.Henkelis,
therefore,notliableforthesuitabilityof rproductfortheproductionprocesses
andconditionsinrespectofwhichy usethem,aswellastheintended
applicationsandresults.Westronglyrecommendthaty carry ty rown
priortrialstoconfirmsuchsuitabilityof rproduct.
AnyliabilityinrespectoftheinformationintheTechnicalDataSheetoranyother
writtenororalrecommendation(s)regardingtheconcernedproductisexcluded,
exceptifotherwiseexplicitlyagreedandexceptinrelationtodeathorpersonal
injurycausedby rnegligenceandanyliabilityunderanyapplicablemandatory
productliabilitylaw.
IncaseproductsaredeliveredbyHenkelCorporation,ResinTechnology
Group,Inc.,orHenkelCanadaCorporation,thefollowingdisclaimeris
applicable:
Thedatacontainedhereinarefurnishedforinformationonlyandarebelievedto
bereliable.Wecannotassumeresponsibilityfortheresultsobtainedbyothers
overwhosemethodswehavenocontrol.Itistheuser’sresponsibilityto
determinesuitabilityfortheuser’spurposeofanyproductionmethodsmentioned
hereinandtoadoptsuchprecautionsasmaybeadvisablefortheprotectionof
propertyandofpersonsagainstanyhazardsthatmaybeinvolvedinthehandling
andusethereof.Inlightoftheforegoing,HenkelCorporationspecifically
disclaimsallwarrantiesexpressedorimplied,includingwarrantiesof
merchantabilityorfitnessforaparticularpurpose,arisingfromsaleoruse
ofHenkelCorporation sproducts.HenkelCorporationspecifically
disclaimsanyliabilityforconsequentialorincidentaldamagesofanykind,
includinglostprofits.Thediscussionhereinofvari sprocessesor
compositionsisnottobeinterpretedasrepresentationthattheyarefreefrom
dominationofpatentsownedbyothersorasalicenseunderanyHenkel
Corporationpatentsthatmaycoversuchprocessesorcompositions.We
recommendthateachprospectiveusertesthisproposedapplicationbefore
repetitiveuse,usingthisdataasaguide.Thisproductmaybecoveredbyoneor
moreUnitedStatesorforeignpatentsorpatentapplications.
Trademarkusage
Exceptasotherwisenoted,alltrademarksinthisdocumentare trademarksof
HenkelCorporationintheU.S.andelsewhere.

denotesatrademark
registeredintheU.S.PatentandTrademarkOffice.

Reference0.1
Americas
+860.571.5100
Europe
+49.89.320800.1800
Asia
+86.21.2891.8863
Forthemostdirectaccesstolocalsalesandtechnicalsupportvisitwww.henkel.com/industrial

37FK700-NC5_TDS.pdf

by | Sep 27, 2025

TechnicalDataSheet

LOCTITE

FREKOTE700-NC
Knownas700-NC
January-2015

PRODUCTDESCRIPTION
LOCTITE

FREKOTE 700-NC providesthefollowing
productcharacteristics:
Technology MoldRelease
Appearance Clear,colorless
LMS
ChemicalType SolventBasedPolymer
Odor Solvent
Cure Romtemperaturecure
CuredThermalStability 400 C
Application ReleaseCoatings
ApplicationTemperature13 to135 C
SpecificBenefit Nochlorinatedsolvents
Highglossfinish
Highslip
Nocontaminatingtransfer
Nomoldbuild-up
LOCTITE

FREKOTE 700-NC offersexcellentrelease
propertiesforthemostdemandingapplicationsandisagreat
all-purposereleaseagent.LOCTITE

FREKOTE700-NC
releasesepoxies,polyesterresins,thermoplastics,rubber
comp ndsandmostothermoldedpolymers.
TYPICALPROPERTIESOFUNCUREDMATERIAL
SpecificGravity@ 25 C 0.755 to0.764
LMS
FlashPoint-SeeSDS
GENERALINFORMATION
Thisproductisnotrecommendedforuseinpureoxygen
and/oroxygenrichsystemsandshouldnotbeselectedas
asealantforchlorineorotherstrongoxidizing materials.
Forsafehandlinginformationonthisproduct,consultthe
SafetyDataSheet(SDS).
MoldPreparation
Cleaning:
Moldsurfacesmustbethor ghlycleanedanddried.Alltraces
ofpriorreleasemustberemoved.Thismaybeaccomplished
byusing Frekote

PMCorothersuitablecleaner. Frekote

915WB orlightabrasivescanbeusedforheavybuild-up.

SealingNew/RepairedMolds:
Occasionally,greenorfreshlyrepairedmoldsarerushedinto
servicepriortocompletecurecausinganincreasedam ntof
freestyreneonthemoldsurface.Freshor”productionline”
repairs,newfiberglassandepoxymoldssh ldbecuredper
manufacturer’sinstructions,usuallyaminimumof2-3weeks
at22 Cbeforestartingfull-scaleproduction.Fullycured
previ slyunusedmoldssh ldbesealedbeforeuse.This
canbeaccomplishedbyapplyingonetotwocoatsof an
appropriate Frekote

moldsealer, followingthedirectionsfor
useinstructions. AllowfullcureoftheappropriateFrekote

moldsealerbeforey applythefirstcoatofLOCTITE

FREKOTE700-NC as tlinedinthedirectionsofuse.
Directionsforuse:
1.LOCTITE

FREKOTE700-NC canbeappliedtomold
surfacesatromtemperatureupto135 Cbyspraying,
brushingorwipingwithacleanlint-free,cloth.When
sprayingensureadryairs rceisusedoruseanairless
spraysystem.Alwaysuseinawellventilatedarea.
2.Wipeorsprayonasmoth,thin,continu s,wet
film. Avoidwipingorsprayingoverthesameareathat
wasjustcoateduntilthesolventhasevaporated.If
spraying,holdnozzle20 to30cmfrommoldsurface.Itis
suggestedthatsmallareasbecoated,working
progressivelyfromonesideofthemoldtotheother.
3.Initially,apply2 to3basecoatsallowing5 to10 minutes
betweencoatsforsolventevaporation .
4.Allowthefinalcoattocurefor15 to20minutesat22 C.
5.Maximumreleaseswillbeobtainedasthemoldsurface
becomesconditionedtoLOCTITE

FREKOTE700-NC
. Performancecanbe enhancedbyre-coatingonce,after
thefirstfewinitialpulls.
6.Whenanyreleasedifficultyisexperienced,theareain
questioncanbe”t ched-up”byre-coatingtheentire
moldsurfaceorjustthoseareaswherereleasedifficultyis
occurring.
7.NOTE: LOCTITE

FREKOTE700-NC ismoisture
sensitive,keepcontainertightlyclosedwhennotinuse.
Theproductsh ldalwaysbeusedinawellventilated
area.
8.Precaution: Usersofclosedmoldsystems(rotomolding)
mustbecertainthatsolventevaporationiscompleteand
thatallsolventvaporshavebeenventilatedfromthemold
cavitypriortoclosingthemold.Anoil-freecompressedair
s rcecanbeusedtoassistinevaporationofsolvents
andventilationofthemoldcavity.

TDSLOCTITE

FREKOTE700-NC , January-2015
MoldTouchup
T chupcoatssh ldonlybeappliedtoareaswherepor
releaseisnoticedandsh ldbeappliedusingthesame
methodasbasecoats.Thiswillreducethepossibilityof
releaseagentorpolymerbuild-up.Thefrequencyoft chups
willdependonthepolymertype,moldconfiguration,and
abrasionparameters.
LoctiteMaterialSpecification
LMS
LMSdated May-10,2006. Testreportsforeachbatchare
availablefortheindicatedproperties. LMStestreportsinclude
selectedQCtestparametersconsideredappropriateto
specificationsforcustomeruse. Additionally,comprehensive
controlsareinplacetoassureproductqualityand
consistency. Specialcustomerspecificationrequirementsmay
becordinatedthr ghHenkel Quality.
Storage
Theproductisclassifiedasflammableandmustbestoredin
anappropriatemannerincompliancewithrelevant
regulations. Donotstorenearoxidizingagentsorcombustible
materials. Storeproductintheunopenedcontainerinadry
location. Storageinformationmayalsobeindicatedonthe
productcontainerlabelling.
OptimalStorage: 8 Cto21 C. Storagebelow8 Cor
greaterthan28 Ccanadverselyaffectproductproperties.
Materialremovedfromcontainersmaybecontaminatedduring
use. Donotreturnproducttotheoriginalcontainer. Henkel
cannotassumeresponsibilityforproductwhichhasbeen
contaminatedorstoredunderconditionsotherthanthose
previ slyindicated. Ifadditionalinformationisrequired,
pleasecontacty rlocalTechnicalServiceCenteror
CustomerServiceRepresentive.
Conversions
( Cx1.8)+32= F
kV/mmx25.4=V/mil
mm/25.4=inches
m/25.4=mil
Nx0.225=lb
N/mmx5.71=lb/in
N/mm x145=psi
MPax145=psi
N m x 8.851= lb in
N mx0.738=lb ft
N mm x0.142=oz in
mPa s=cP
Note:
TheinformationprovidedinthisTechnicalDataSheet(TDS)includingthe
recommendationsforuseandapplicationoftheproductarebasedon r
knowledgeandexperienceoftheproductasatthedateofthisTDS.Theproduct
canhaveavarietyofdifferentapplicationsaswellasdifferingapplicationand
workingconditionsiny renvironmentthatarebeyond rcontrol.Henkelis,
therefore,notliableforthesuitabilityof rproductfortheproductionprocesses
andconditionsinrespectofwhichy usethem,aswellastheintended
applicationsandresults.Westronglyrecommendthaty carry ty rown
priortrialstoconfirmsuchsuitabilityof rproduct.
AnyliabilityinrespectoftheinformationintheTechnicalDataSheetoranyother
writtenororalrecommendation(s)regardingtheconcernedproductisexcluded,
exceptifotherwiseexplicitlyagreedandexceptinrelationtodeathorpersonal
injurycausedby rnegligenceandanyliabilityunderanyapplicablemandatory
productliabilitylaw.
IncaseproductsaredeliveredbyHenkelBelgiumNV,HenkelElectronic
MaterialsNV,HenkelNederlandBV,HenkelTechnologiesFranceSASand
HenkelFranceSApleaseadditionallynotethefollowing:
IncaseHenkelw ldbeneverthelessheldliable,onwhateverlegalgr nd,
Henkel sliabilitywillinnoeventexceedtheam ntoftheconcerneddelivery.
IncaseproductsaredeliveredbyHenkelColombiana,S.A.S.thefollowing
disclaimerisapplicable:
TheinformationprovidedinthisTechnicalDataSheet(TDS)includingthe
recommendationsforuseandapplicationoftheproductarebasedon r
knowledgeandexperienceoftheproductasatthedateofthisTDS.Henkelis,
therefore,notliableforthesuitabilityof rproductfortheproductionprocesses
andconditionsinrespectofwhichy usethem,aswellastheintended
applicationsandresults.Westronglyrecommendthaty carry ty rown
priortrialstoconfirmsuchsuitabilityof rproduct.
AnyliabilityinrespectoftheinformationintheTechnicalDataSheetoranyother
writtenororalrecommendation(s)regardingtheconcernedproductisexcluded,
exceptifotherwiseexplicitlyagreedandexceptinrelationtodeathorpersonal
injurycausedby rnegligenceandanyliabilityunderanyapplicablemandatory
productliabilitylaw.
IncaseproductsaredeliveredbyHenkelCorporation,ResinTechnology
Group,Inc.,orHenkelCanadaCorporation,thefollowingdisclaimeris
applicable:
Thedatacontainedhereinarefurnishedforinformationonlyandarebelievedto
bereliable.Wecannotassumeresponsibilityfortheresultsobtainedbyothers
overwhosemethodswehavenocontrol.Itistheuser’sresponsibilityto
determinesuitabilityfortheuser’spurposeofanyproductionmethodsmentioned
hereinandtoadoptsuchprecautionsasmaybeadvisablefortheprotectionof
propertyandofpersonsagainstanyhazardsthatmaybeinvolvedinthehandling
andusethereof.Inlightoftheforegoing,HenkelCorporationspecifically
disclaimsallwarrantiesexpressedorimplied,includingwarrantiesof
merchantabilityorfitnessforaparticularpurpose,arisingfromsaleoruse
ofHenkelCorporation sproducts.HenkelCorporationspecifically
disclaimsanyliabilityforconsequentialorincidentaldamagesofanykind,
includinglostprofits.Thediscussionhereinofvari sprocessesor
compositionsisnottobeinterpretedasrepresentationthattheyarefreefrom
dominationofpatentsownedbyothersorasalicenseunderanyHenkel
Corporationpatentsthatmaycoversuchprocessesorcompositions.We
recommendthateachprospectiveusertesthisproposedapplicationbefore
repetitiveuse,usingthisdataasaguide.Thisproductmaybecoveredbyoneor
moreUnitedStatesorforeignpatentsorpatentapplications.
Trademarkusage
Exceptasotherwisenoted,alltrademarksinthisdocumentare trademarksof
HenkelCorporationintheU.S.andelsewhere.

denotesatrademark
registeredintheU.S.PatentandTrademarkOffice.

Reference0.1
Americas
+860.571.5100
Europe
+49.89.320800.1800
Asia
+86.21.2891.8863
Forthemostdirectaccesstolocalsalesandtechnicalsupportvisitwww.henkel.com/industrial

37FK1000PG_TDS.pdf

by | Sep 27, 2025

1726 Floradale Ave., So. El Monte, CA 91733 | 626.443.8983 | sales@FinishKare.com | FinishKare.com
Product Data Sheet
1000P
Hi Low Paste Wax

Premium Mold Release Wax

Description
Finish Kare’s 1000P Hi Low Paste Wax is one of
our very popular product . It is part of the 1000 Mold Release
Wax Series, each formulated with a unique blend of synthetic
waxes and solvents to get specifically desired results.

1000P does exceptionally well in high exothermic conditions
and provides easy multiple releases.

Features & Benefits
High Temp Tolerance
Withstands high temperature exothermic reactions
of resins and does multiple releases easily.
Good for up to 275 F or 135 C.
Unique Wax Makeup
Contains carnauba wax, synthetic waxes and high
temperature resistant resins for effective multiple
releases of composite parts.
High Gloss Finish
Buffing out the final coat will result in a high gloss
finish
The hard, shiny film protects the molds from
intensive wear and heat and creates smoother,
shinier parts
Clean & Seal
Prior to any mold release wax application, we highly
recommend all molds be cleaned and sealed using our #69
Mold Cleaner and Stripper or #135 80 for a deeper clean and
our #86 Seal Kote to seal up any porosity.

Application Process
Step 1: Apply # 1000P, Hi Low Mold Release Wax in Five (5)
separate applications. Make sure that each coat is dry prior to
wiping. Please criss cross each application for assuring the
complete coverage. Apply wax in a circular motion to work the
wax in.

Step 2: Allow 30 minutes to set after the final wipe. Then re
wipe, pour the first part and release it.

Step 3: After releasing the part gently wipe the mold, then
apply one more coat of wax and release one more part.

AT THIS POINT, MOLD IS CURED TO THE POINT THAT
MULTIPLE RELEASES ARE POSSIBLE.

***Additional Release Tricks***
When a part gets a little hard to pull, apply one coat of
#1000L, Hi Low Liquid Wax, let it dry and wipe lightly. Run
more parts and apply # 1000L as needed. Use of # 1000L helps
in preventing wax buildup and thus helps in multiple releases.

Safety Data Sheet
Safety Date Sheets are available for all Finish Kare products
and should be consulted prior to use

Storage and Shelf Life
Store tightly closed container in a dry, cool place that is well
ventilated and below 46 C /104 F. Do not handle or store
near open flame, heat or other sources of ignition. Shelf life is
1 years from date of shipment.

IMITATIONS OF LIABILITY
To the best of our knowledge, the data presented here is true and accurate, but is
subject to change without prior notice. User is kindly requested to contact Finish Kare
Products to verify the correctness before specifying or ordering. Since we don t know
how the product will be used we cannot assume any responsibility for its use,
performance, or any injuries resulting from its use. Liability, if any, is limited to
replacement of defective product. No warranty or guarantee of any kind is expressed or
implied by Finish Kare Products, Inc.

37FK1000LD_TDS.pdf

by | Sep 27, 2025

1726 Floradale Ave., So. El Monte, CA 91733 | 626.443.8983 | sales@FinishKare.com | FinishKare.com
Product Data Sheet
1000L
Hi Low Liquid Wax

Interphase Wax Liquid Gold

Description
The charm of 1000L is it allows you to get even more releases
in a multiple release cycle with less effort. It reduces wax build
up and surface tension, while redistributing and smoothing
out the existing waxes to prepping your mold to release the
next part.

Once the pulls start to get a little harder instead of doing a
clean re layup, simply apply 1000L Liquid Wax and continue
releasing.

Features & Benefits
Increased Number of Releases
Instead of reapplying paste wax, 1000L lets you get
more releases from the same initial layup
It also increases protection of the molds and helps to
prolong the multiple release cycle
Saves Time
Liquid Wax dries quickly, which cuts down on wait
time and lets your team get back to work faster
Minimal Elbow Grease Required
Due to its liquid nature 1000L is quick to apply.
The unique solvents do the heavy lifting by easily
liquefying the mold release waxes which requires
very little effort to apply

Clean & Seal
Prior to any mold release wax application, we highly
recommend all molds be cleaned and sealed using our #69
Mold Cleaner and Stripper or #135 80 for a deeper clean and
our #86 Seal Kote to seal up any porosity.

Application Process
Once the mold is properly broken in using a paste wax, like
our #1000P Hi Low Paste Wax, then 1000L can be applied.

Step 1: Spread evenly and agitate lightly

Step 2: Allow 15 30 mins to dry and then wipe.

Repeat 1 or 2 more times and then continue releasing. Repeat
this process again once pulls start to get difficult.

This product contains sufficient waxes to continue easy
demolding and multiple releases. It reactivates and spreads
the paste wax deterring any possible wax build up or surface
tension.

Safety Data Sheet
Safety Date Sheets are available for all Finish Kare products
and should be consulted prior to use.

Storage and Shelf Life
Store tightly closed container in a dry, cool place that is well
ventilated. Do not handle or store near open flame, heat or
other sources of ignition. Shelf life is 6 months after opening.

LIMITATIONS OF LIABILITY
To the best of our knowledge, the data presented here is true and accurate, but is
subject to change without prior notice. User is kindly requested to contact Finish Kare
Products to verify the correctness before specifying or ordering. Since we don t know
how the product will be used we cannot assume any responsibility for its use,
performance, or any injuries resulting from its use. Liability, if any, is limited to
replacement of defective product. No warranty or guarantee of any kind is expressed or
implied by Finish Kare Products, Inc.

37FK1000L5_TDS.pdf

by | Sep 27, 2025

1726 Floradale Ave., So. El Monte, CA 91733 | 626.443.8983 | sales@FinishKare.com | FinishKare.com
Product Data Sheet
1000L
Hi Low Liquid Wax

Interphase Wax Liquid Gold

Description
The charm of 1000L is it allows you to get even more releases
in a multiple release cycle with less effort. It reduces wax build
up and surface tension, while redistributing and smoothing
out the existing waxes to prepping your mold to release the
next part.

Once the pulls start to get a little harder instead of doing a
clean re layup, simply apply 1000L Liquid Wax and continue
releasing.

Features & Benefits
Increased Number of Releases
Instead of reapplying paste wax, 1000L lets you get
more releases from the same initial layup
It also increases protection of the molds and helps to
prolong the multiple release cycle
Saves Time
Liquid Wax dries quickly, which cuts down on wait
time and lets your team get back to work faster
Minimal Elbow Grease Required
Due to its liquid nature 1000L is quick to apply.
The unique solvents do the heavy lifting by easily
liquefying the mold release waxes which requires
very little effort to apply

Clean & Seal
Prior to any mold release wax application, we highly
recommend all molds be cleaned and sealed using our #69
Mold Cleaner and Stripper or #135 80 for a deeper clean and
our #86 Seal Kote to seal up any porosity.

Application Process
Once the mold is properly broken in using a paste wax, like
our #1000P Hi Low Paste Wax, then 1000L can be applied.

Step 1: Spread evenly and agitate lightly

Step 2: Allow 15 30 mins to dry and then wipe.

Repeat 1 or 2 more times and then continue releasing. Repeat
this process again once pulls start to get difficult.

This product contains sufficient waxes to continue easy
demolding and multiple releases. It reactivates and spreads
the paste wax deterring any possible wax build up or surface
tension.

Safety Data Sheet
Safety Date Sheets are available for all Finish Kare products
and should be consulted prior to use.

Storage and Shelf Life
Store tightly closed container in a dry, cool place that is well
ventilated. Do not handle or store near open flame, heat or
other sources of ignition. Shelf life is 6 months after opening.

LIMITATIONS OF LIABILITY
To the best of our knowledge, the data presented here is true and accurate, but is
subject to change without prior notice. User is kindly requested to contact Finish Kare
Products to verify the correctness before specifying or ordering. Since we don t know
how the product will be used we cannot assume any responsibility for its use,
performance, or any injuries resulting from its use. Liability, if any, is limited to
replacement of defective product. No warranty or guarantee of any kind is expressed or
implied by Finish Kare Products, Inc.

37BO760_TDS.pdf

by | Sep 27, 2025

DESCRIPTION:
Icing Pourable Brushable Polyester Finishing Putty is the original, best selling polyester finishing putty that
spreads smoothly, self levels, and dries to an exceptionally easy to sand finish. Icing provides great adhesion and
is tack free and stain free.
PART NUMBERS:

26006 Icing 24 fl. oz. tube 6 tubes / case 12 lbs / case
26011 Icing 30 fl. oz. pumptainer bottle 6 bottles / case 16 lbs / case

Form: TDSUSC26006 PG 1 of 2 Rev: 02/11 U.S. Chemical & Plastics 600 Nova Dr. SE Massillon, OH 44646 Tel: 800-321-0672
www.USChem.com

TTEECCHHNNIICCAALL DDAATTAA SSHHEEEETT IIcciinngg
PRODUCT: Icing Pourable Brushable Polyester Finishing Putty
TECHNICAL CALLS: 1-800-321-0672

TYPICAL SUBSTRATES:

Metal Aluminum Fiberglass Body Filler Wood 2K Primers
Aged, sanded OEM Topcoats Galvanized and other zinc-coated steel
SMC can be used for cosmetic repairs. For structural repairs prone to high degrees of stress and flexibility,
use an SMC repair product. For flexible plastics use PRO-FLEX 26037.

SURFACE PREPARATION:

1. Clean surface. Remove all dirt, oil, grease and wax with a cleaning solvent such as 1240-1 Wax,
Grease & Silicone Remover.
2. Make sure surface is dry before repairing.
3. Use 80 180 grit disc to featheredge paint for good mechanical adhesion.

MIXING:

For best results, bring putty and provided hardener to room temperature (minimum temperature 68 F).
Knead hardener tube before use. Place a 4 diameter puddle of putty on a clean mixing surface (we
recommend a non-absorbent plastic mixing board) and add a ribbon of cream hardener from edge to
edge across the center of the putty puddle (puddles larger than 4 will require additional hardener); or
measure hardener at 2% by weight a 50-1 ratio. Mix thoroughly with a plastic spreader, using a folding
motion, until uniform color is achieved. At room temperature (68 F) approximate setting time is 3-5
minutes.

MIX
PRODUCT USES:
Use for minor body work and surface imperfections (1/8 thick or less) such as sand scratches, chips, scratches and
pinholes. Ideal for use as a finish coat over body filler.

APPLICATION:
1. Using a plastic spreader, apply a thin layer of putty to surface, using firm pressure for maximum
adhesion.
2. Apply additional layers, building up damaged area higher than the surrounding surface to allow for
sanding of the putty. Do not apply over fresh or uncured coatings.

FINISHING:
When material has hardened, in approximately 15 minutes, sand with 100 – 180 grit sandpaper followed by
220 – 400 grit if desired.

SPECIAL NOTES: May be intermixed with any USC Body Filler product except All-Metal.

TECHNICAL INFORMATION :
Appearance as Packaged: Off-White
VOC Packaged: 281 g/l
Applied: 2.2 g/l
Weight Per Gallon (Density): 9.5 pounds/gallon (Average)
Maximum Recommended Thickness (sanded): 1/8
Viscosity @ 77

F: 18,000 cps
Gel Time @ 77

F: 4.0 5.0 minutes
Shore D Hardness Values @ 24 hours: 55-60
Sanding Time @ 77
o
F: 15 minutes
Maximum Heat: 200 F for 30 minutes
Catalyst Required: Benzoyl Peroxide
Catalyzation Ratio: 2% by weight (50:1 ratio)
Exotherm Temperature: 220 F (Average)
Tack Free Time: 10 – 15 minutes

HEALTH & SAFETY:
Read all warnings, first aid and safety for all components before using. Keep out of reach of children and
animals. Protect hands with impervious rubber gloves. Wear face, skin and eye protection. When
sanding, we recommend the use of a respiratory covering device to protect from dust (MSA mask P/N
459029 with MSA cartridge 464029 or equivalent). When using power equipment, refer to power tool
manufacturer s recommendations for safety equipment. USC products are for industrial use by trained
professionals only.

Emergency Medical or Spill Control Information:
In U.S. or Canada call CHEMTREC at 1-800-424-9300
Form: TDSUSC26006 PG 2 of 2 Rev: 02/11 U.S. Chemical & Plastics 600 Nova Dr. SE Massillon, OH 44646 Tel: 800-321-0672
www.USChem.com

TOPCOATING:
May be topcoated with polyester, 2K urethane or 1K primer. Refer to paint manufacturer s instructions for topcoat
application.

ASSOCIATED MSDS : Putty: Icing-26014 Hardener: Cream Hardener