by | Sep 27, 2025
FE ATURE S
SWIRL FREE FINISH
Achieve the ultimate finish and
shine!
EASY APPLICATION
Dab on with brush or cloth, then
move smoothly across surface
with rotary buffer.
ECONOMICAL
Use half as much compared to
other compounds.
WATER BASED
Environmentally friendly.
MULTIPLE-SIZE PACKING
Packaged to meet a v ariety of
manufacturing requirements.
AQUA-BUFF 1000F
FAST-CUT BUFFING COMPOUND
PR O D U C T # AB1000F
909-546-1160
hawkeyesales@hawkeyeind.com
PO BOX 415,
BLOOMINGTON, CA 92316
WWW.HAWKEYEIND.COM
Removal of scratches from
gelcoated and painted
surfaces such as boats,
patterns, plugs, molds, and
other finished products.
SOLVENT-
FREE
BUFFING
FOR
SMOOTH &
SHINY TRUE
SURFACES
KEY USES
DESCRIPTION
Water-based fast-cut compound for aggressive removal of sanding
scratches or oxidation. Used to remove scratches and
polish composite
patterns, plugs, masters, and product molds. Also a great choice to
remove scratches and to clean FRP parts, metal, and painted surfaces
REVISED
JULY 2021
REVISED JANUARY 2025
S AFETY &
HAN DL I NG
Aqua-Buff should be shipped and stored in moderate temperatures with care for temperature
control in transit. Exposure to extreme temperatures can result in breakdown or suspension
of the emulsion. Do not allow Aqua
-Buff to freeze. We recommend products be kept
unopened as long as possible and stored in a cool location, tightly resealing the lid after
opening. All Aqua-Buff formulations contain a biocide to inhibit mold growth, how
ever no
biocide has unlimited capacity to control growth. In areas with high humidity, use of plastic
film placed on the material after opening, may help inhibit mold growth. For more detailed
ins
tructions on safe storage and transportation, please see the MSDS sheet.
Liability/warranty statement:
Our products are intended for sale to industrial and
commercial customers. We request that customers inspect and test our products before use
and satisfy themselves as to contents and suitability. All claim requests must be made in
writing and are subject to review, including storage temperature verification and retain
evaluations. The exclusive remedy for all proven claims is replacement of our materials and
in no event shall we be liable for special, incidental or consequential damages, including
damages caused in transit.
Nothing herein shall constitute a warranty, expressed or implied,
including any warranty of merchantability or fitness, nor is protection from any law or patent
to be inferred. Aqua Buff is sold by container and weight is not guaranteed.
All patent and
trademark rights are reserved.
Viscosity
Viscosity measurements are taken at 48
hours on a Brookfield viscometer. A #6
spindle is used on 4rpm speed with a
sample reading 70 -75 F over 1 minute.
MINIMUM
% Moisture 44.70%
Weight per gallon 9-
10 lbs. +/- .5*
MAXIMUMSPECIFICATIONS
155,000 CPS 230,000 CPS
47.70%
% Binders 18.78% 20.78%
Aqua-Buff is a unique emulsion of binders and abrasives, containing no silica. Aqua-Buff
1000F blend is on average, 80% 40 microns particle size; 17% are greater than 78 microns;
3% are greater than 154 microns.
Color COOKIES & CREAM
% Solids 32.52% 35.52%
*
Product weight varies based on several factors at time of production. As such Aqua-Buff is
sold by volume, specific weight is not a guarantee.
PRODUCT SPECIFICATIONS
AQUA-BUFF 1000F
FAST-CUT BUFFING COMPOUND
PR O D U C T # A B10 00F
P
LEASE NOTE
The following use instructions are broad to address multiple applications. We recommend testing for product
compatability with your process. Please contact our Tech T
eam at (909) 546-1160 with any questions.
Compound Application Guide
(FOR AQUA-BUFF 1000F, 1000W, 2000, GLOSSMASTER)
1.Buffing Pad: it is critically important to link the correct buffing pad to each Aqua-Buff product. We
advocate a tufted wool buffing pad for fast cut compounds like Aqua-
Buff 1000W or 1000F. For
polishing with Aqua-Buff 2000 or GlossMaster, we recommend a fine polishing pad. A foam pad
can be used to get the ultimate shine.
2.Amount used: we find that most users apply too much compound and polish. Dab on an amount
similar to a poker chip (about 3 cm across) for each square foot (30 cm) to be polished.
3.Spray bottle: Aqua-Buff 1000F/W and Aqua-Buff 2000 are sold as concentrates. The person
doing the polishing adds water by spraying a mist onto the part. The buffing pad captures the
compound/polish, and also the water. When the part appears dry, add more water with the spray
bottle. As long as a milky liquid appears when the pad captures the water additional polish is not
needed. Aqua-
Buff GlossMaster does not require additional water.
4.Heat: a significant benefit of Aqua-Buff is that the sprayed water helps keep the surface cool
during buffing. Heat can cause distortion to appear in the surface.
5.Buffer: we recommend a 2400 rpm commercial buffer. Wiping by hand will not create the
necessary speed and energy to buff. Compound at full speed, polish at half speed.
6.Surfaces: Aqua-Buff works on gelcoat, Duratec and other composite surfaces.
7.After buffing: wash the surface with soapy water to remove any leftover polish.
TIP:
A common question we get is – “What final grit of sandpaper do I need to use?” The answer will
depend on the hardness of the surface (harder requires a finer grit) and the quality of the surface
required. For most gelcoats, a final grit of at least 800 is recommended.
AQUA-BUFF PRODUCT CHOICES see our Aqua-Buff Product Selector for more details
Aqua-
Buff 1000F is FAST. It can be too aggressive for soft surfaces, leaving swirl-marks. It is a
grey-white (referred to as “cookies and cream”) color.
Aqua
-Buff 1000W is a blue-green color. It works very well on most surfaces, but can leave a
blue haze on oxidized gelcoat or white gelcoat.
Aqua-
Buff 2000 is a polish. It is used to remove swirl marks from compounding, or to re-shine
oxidized gelcoat. Aqua-Buff 2000 is a white color and does not leave a haze.
GlossMaster is used when the polisher does not want to use a spray water bottle to leave a fine,
glossy surface.
See the Liability and Warranty Statement on Page 1
AQUA-BUFF PRODUCTS
T
ROUBLESHOOTING | AB1000F, AB1000W, AB2000
WWW.HAWKEYEIND.COM 909-546-1160 HAWKEYESALES@HAWKEYEIND.COM PO BOX 415, BLOOMINGTON, CA 92316
Liability/warranty statement: Our products are intended for sale to industrial and commercial customers. We request that customers inspect and test our
products before use and satisfy themselves as to contents and suitability. All claim requests must be made in writing and are subject to review,
including storage temperature verification and retain evaluations. The exclusive remedy for all proven claims is replacement of our materials and in no
event shall we be liable for special, incidental or consequential damages, including damages caused in transit. Nothing herein shall constitute a
warranty, expressed or implied, including any warranty of merchantability or fitness, nor is protection from any law or patent to be inferred. Aqua Buff is
sold by container and weight is not guaranteed. All patent and trademark rights are reserved.
www.hawkeyeind.com
Application Issue Cause Solution
Burned gelcoat
Speed settings too high.
Dry surface/dry compound
Adjust rotary buffer to ~2500 RPM for
compound, ~1750 for polish. A DA may not
have adjustable speed.
Spritz water on surface to cool and
provide necessary surface lubrication. Keep moving across surface.
Chalky surface
Excess Aqua Buff used
Aqua-Buff compounds cover a lot of
footage. Reduce to 1 poker chip size
amount of compound/polish per square
foot.
Oxidation not removed Compound cut not enough.
Select Aqua-Buff 1000F for
heavy oxidation.
Swirl-Marks
Pad selection is critical. Compound
with a wool pad, polish with a fine
polishing pad.
Buffing pad selection incorrect.
Material selection incorrect.
Aqua-Buff 1000F is fast cut and will
leave swirl marks. Aqua-Buff 2000
is required to remove swirls and
bring out gloss level.
Compound left on surface
Compounds & polishes break down
during application. Resume buffing,
adding water as needed, to work
compound thoroughly.
Quality ConcernComments:
Mousse-like texture
Density variations can occur in
emulsion production resulting in material which can be
creamy or slightly mousse-like. Proceed with use as outlined in application guide.
Exposure to freezing temperatures in storage or transit and generally not a concern for
application. Bring material to room temperature, and test. If needed, add additional water in
application. Do not allow additional freeze/thaw cycles to occur.Icy participles or
slight clumping
Oily liquid or chunks
Rare issue due to extreme heat in storage or transit. Bring material to room temperature, stir
with drill mixer and test. If material does not reconstitute, select new material for use.
by | Sep 27, 2025
FE ATURE S
SWIRL FREE FINISH
Achieve the ultimate finish and
shine!
EASY APPLICATION
Dab on with brush or cloth, then
move smoothly across surface
with rotary buffer.
ECONOMICAL
Use half as much compared to
other compounds.
WATER BASED
Environmentally friendly.
MULTIPLE-SIZE PACKING
Packaged to meet a v ariety of
manufacturing requirements.
AQUA-BUFF 1000F
FAST-CUT BUFFING COMPOUND
PR O D U C T # AB1000F
909-546-1160
hawkeyesales@hawkeyeind.com
PO BOX 415,
BLOOMINGTON, CA 92316
WWW.HAWKEYEIND.COM
Removal of scratches from
gelcoated and painted
surfaces such as boats,
patterns, plugs, molds, and
other finished products.
SOLVENT-
FREE
BUFFING
FOR
SMOOTH &
SHINY TRUE
SURFACES
KEY USES
DESCRIPTION
Water-based fast-cut compound for aggressive removal of sanding
scratches or oxidation. Used to remove scratches and
polish composite
patterns, plugs, masters, and product molds. Also a great choice to
remove scratches and to clean FRP parts, metal, and painted surfaces
REVISED
JULY 2021
REVISED JANUARY 2025
S AFETY &
HAN DL I NG
Aqua-Buff should be shipped and stored in moderate temperatures with care for temperature
control in transit. Exposure to extreme temperatures can result in breakdown or suspension
of the emulsion. Do not allow Aqua
-Buff to freeze. We recommend products be kept
unopened as long as possible and stored in a cool location, tightly resealing the lid after
opening. All Aqua-Buff formulations contain a biocide to inhibit mold growth, how
ever no
biocide has unlimited capacity to control growth. In areas with high humidity, use of plastic
film placed on the material after opening, may help inhibit mold growth. For more detailed
ins
tructions on safe storage and transportation, please see the MSDS sheet.
Liability/warranty statement:
Our products are intended for sale to industrial and
commercial customers. We request that customers inspect and test our products before use
and satisfy themselves as to contents and suitability. All claim requests must be made in
writing and are subject to review, including storage temperature verification and retain
evaluations. The exclusive remedy for all proven claims is replacement of our materials and
in no event shall we be liable for special, incidental or consequential damages, including
damages caused in transit.
Nothing herein shall constitute a warranty, expressed or implied,
including any warranty of merchantability or fitness, nor is protection from any law or patent
to be inferred. Aqua Buff is sold by container and weight is not guaranteed.
All patent and
trademark rights are reserved.
Viscosity
Viscosity measurements are taken at 48
hours on a Brookfield viscometer. A #6
spindle is used on 4rpm speed with a
sample reading 70 -75 F over 1 minute.
MINIMUM
% Moisture 44.70%
Weight per gallon 9-
10 lbs. +/- .5*
MAXIMUMSPECIFICATIONS
155,000 CPS 230,000 CPS
47.70%
% Binders 18.78% 20.78%
Aqua-Buff is a unique emulsion of binders and abrasives, containing no silica. Aqua-Buff
1000F blend is on average, 80% 40 microns particle size; 17% are greater than 78 microns;
3% are greater than 154 microns.
Color COOKIES & CREAM
% Solids 32.52% 35.52%
*
Product weight varies based on several factors at time of production. As such Aqua-Buff is
sold by volume, specific weight is not a guarantee.
PRODUCT SPECIFICATIONS
AQUA-BUFF 1000F
FAST-CUT BUFFING COMPOUND
PR O D U C T # A B10 00F
P
LEASE NOTE
The following use instructions are broad to address multiple applications. We recommend testing for product
compatability with your process. Please contact our Tech T
eam at (909) 546-1160 with any questions.
Compound Application Guide
(FOR AQUA-BUFF 1000F, 1000W, 2000, GLOSSMASTER)
1.Buffing Pad: it is critically important to link the correct buffing pad to each Aqua-Buff product. We
advocate a tufted wool buffing pad for fast cut compounds like Aqua-
Buff 1000W or 1000F. For
polishing with Aqua-Buff 2000 or GlossMaster, we recommend a fine polishing pad. A foam pad
can be used to get the ultimate shine.
2.Amount used: we find that most users apply too much compound and polish. Dab on an amount
similar to a poker chip (about 3 cm across) for each square foot (30 cm) to be polished.
3.Spray bottle: Aqua-Buff 1000F/W and Aqua-Buff 2000 are sold as concentrates. The person
doing the polishing adds water by spraying a mist onto the part. The buffing pad captures the
compound/polish, and also the water. When the part appears dry, add more water with the spray
bottle. As long as a milky liquid appears when the pad captures the water additional polish is not
needed. Aqua-
Buff GlossMaster does not require additional water.
4.Heat: a significant benefit of Aqua-Buff is that the sprayed water helps keep the surface cool
during buffing. Heat can cause distortion to appear in the surface.
5.Buffer: we recommend a 2400 rpm commercial buffer. Wiping by hand will not create the
necessary speed and energy to buff. Compound at full speed, polish at half speed.
6.Surfaces: Aqua-Buff works on gelcoat, Duratec and other composite surfaces.
7.After buffing: wash the surface with soapy water to remove any leftover polish.
TIP:
A common question we get is – “What final grit of sandpaper do I need to use?” The answer will
depend on the hardness of the surface (harder requires a finer grit) and the quality of the surface
required. For most gelcoats, a final grit of at least 800 is recommended.
AQUA-BUFF PRODUCT CHOICES see our Aqua-Buff Product Selector for more details
Aqua-
Buff 1000F is FAST. It can be too aggressive for soft surfaces, leaving swirl-marks. It is a
grey-white (referred to as “cookies and cream”) color.
Aqua
-Buff 1000W is a blue-green color. It works very well on most surfaces, but can leave a
blue haze on oxidized gelcoat or white gelcoat.
Aqua-
Buff 2000 is a polish. It is used to remove swirl marks from compounding, or to re-shine
oxidized gelcoat. Aqua-Buff 2000 is a white color and does not leave a haze.
GlossMaster is used when the polisher does not want to use a spray water bottle to leave a fine,
glossy surface.
See the Liability and Warranty Statement on Page 1
AQUA-BUFF PRODUCTS
T
ROUBLESHOOTING | AB1000F, AB1000W, AB2000
WWW.HAWKEYEIND.COM 909-546-1160 HAWKEYESALES@HAWKEYEIND.COM PO BOX 415, BLOOMINGTON, CA 92316
Liability/warranty statement: Our products are intended for sale to industrial and commercial customers. We request that customers inspect and test our
products before use and satisfy themselves as to contents and suitability. All claim requests must be made in writing and are subject to review,
including storage temperature verification and retain evaluations. The exclusive remedy for all proven claims is replacement of our materials and in no
event shall we be liable for special, incidental or consequential damages, including damages caused in transit. Nothing herein shall constitute a
warranty, expressed or implied, including any warranty of merchantability or fitness, nor is protection from any law or patent to be inferred. Aqua Buff is
sold by container and weight is not guaranteed. All patent and trademark rights are reserved.
www.hawkeyeind.com
Application Issue Cause Solution
Burned gelcoat
Speed settings too high.
Dry surface/dry compound
Adjust rotary buffer to ~2500 RPM for
compound, ~1750 for polish. A DA may not
have adjustable speed.
Spritz water on surface to cool and
provide necessary surface lubrication. Keep moving across surface.
Chalky surface
Excess Aqua Buff used
Aqua-Buff compounds cover a lot of
footage. Reduce to 1 poker chip size
amount of compound/polish per square
foot.
Oxidation not removed Compound cut not enough.
Select Aqua-Buff 1000F for
heavy oxidation.
Swirl-Marks
Pad selection is critical. Compound
with a wool pad, polish with a fine
polishing pad.
Buffing pad selection incorrect.
Material selection incorrect.
Aqua-Buff 1000F is fast cut and will
leave swirl marks. Aqua-Buff 2000
is required to remove swirls and
bring out gloss level.
Compound left on surface
Compounds & polishes break down
during application. Resume buffing,
adding water as needed, to work
compound thoroughly.
Quality ConcernComments:
Mousse-like texture
Density variations can occur in
emulsion production resulting in material which can be
creamy or slightly mousse-like. Proceed with use as outlined in application guide.
Exposure to freezing temperatures in storage or transit and generally not a concern for
application. Bring material to room temperature, and test. If needed, add additional water in
application. Do not allow additional freeze/thaw cycles to occur.Icy participles or
slight clumping
Oily liquid or chunks
Rare issue due to extreme heat in storage or transit. Bring material to room temperature, stir
with drill mixer and test. If material does not reconstitute, select new material for use.
by | Sep 27, 2025
FE ATURE S
SWIRL FREE FINISH
Achieve the ultimate finish and
shine!
EASY APPLICATION
Dab on with brush or cloth, then
move smoothly across surface
with rotary buffer.
ECONOMICAL
Use half as much compared to
other compounds.
WATER BASED
Environmentally friendly.
MULTIPLE-SIZE PACKING
Packaged to meet a v ariety of
manufacturing requirements.
AQUA-BUFF 1000F
FAST-CUT BUFFING COMPOUND
PR O D U C T # AB1000F
909-546-1160
hawkeyesales@hawkeyeind.com
PO BOX 415,
BLOOMINGTON, CA 92316
WWW.HAWKEYEIND.COM
Removal of scratches from
gelcoated and painted
surfaces such as boats,
patterns, plugs, molds, and
other finished products.
SOLVENT-
FREE
BUFFING
FOR
SMOOTH &
SHINY TRUE
SURFACES
KEY USES
DESCRIPTION
Water-based fast-cut compound for aggressive removal of sanding
scratches or oxidation. Used to remove scratches and
polish composite
patterns, plugs, masters, and product molds. Also a great choice to
remove scratches and to clean FRP parts, metal, and painted surfaces
REVISED
JULY 2021
REVISED JANUARY 2025
S AFETY &
HAN DL I NG
Aqua-Buff should be shipped and stored in moderate temperatures with care for temperature
control in transit. Exposure to extreme temperatures can result in breakdown or suspension
of the emulsion. Do not allow Aqua
-Buff to freeze. We recommend products be kept
unopened as long as possible and stored in a cool location, tightly resealing the lid after
opening. All Aqua-Buff formulations contain a biocide to inhibit mold growth, how
ever no
biocide has unlimited capacity to control growth. In areas with high humidity, use of plastic
film placed on the material after opening, may help inhibit mold growth. For more detailed
ins
tructions on safe storage and transportation, please see the MSDS sheet.
Liability/warranty statement:
Our products are intended for sale to industrial and
commercial customers. We request that customers inspect and test our products before use
and satisfy themselves as to contents and suitability. All claim requests must be made in
writing and are subject to review, including storage temperature verification and retain
evaluations. The exclusive remedy for all proven claims is replacement of our materials and
in no event shall we be liable for special, incidental or consequential damages, including
damages caused in transit.
Nothing herein shall constitute a warranty, expressed or implied,
including any warranty of merchantability or fitness, nor is protection from any law or patent
to be inferred. Aqua Buff is sold by container and weight is not guaranteed.
All patent and
trademark rights are reserved.
Viscosity
Viscosity measurements are taken at 48
hours on a Brookfield viscometer. A #6
spindle is used on 4rpm speed with a
sample reading 70 -75 F over 1 minute.
MINIMUM
% Moisture 44.70%
Weight per gallon 9-
10 lbs. +/- .5*
MAXIMUMSPECIFICATIONS
155,000 CPS 230,000 CPS
47.70%
% Binders 18.78% 20.78%
Aqua-Buff is a unique emulsion of binders and abrasives, containing no silica. Aqua-Buff
1000F blend is on average, 80% 40 microns particle size; 17% are greater than 78 microns;
3% are greater than 154 microns.
Color COOKIES & CREAM
% Solids 32.52% 35.52%
*
Product weight varies based on several factors at time of production. As such Aqua-Buff is
sold by volume, specific weight is not a guarantee.
PRODUCT SPECIFICATIONS
AQUA-BUFF 1000F
FAST-CUT BUFFING COMPOUND
PR O D U C T # A B10 00F
P
LEASE NOTE
The following use instructions are broad to address multiple applications. We recommend testing for product
compatability with your process. Please contact our Tech T
eam at (909) 546-1160 with any questions.
Compound Application Guide
(FOR AQUA-BUFF 1000F, 1000W, 2000, GLOSSMASTER)
1.Buffing Pad: it is critically important to link the correct buffing pad to each Aqua-Buff product. We
advocate a tufted wool buffing pad for fast cut compounds like Aqua-
Buff 1000W or 1000F. For
polishing with Aqua-Buff 2000 or GlossMaster, we recommend a fine polishing pad. A foam pad
can be used to get the ultimate shine.
2.Amount used: we find that most users apply too much compound and polish. Dab on an amount
similar to a poker chip (about 3 cm across) for each square foot (30 cm) to be polished.
3.Spray bottle: Aqua-Buff 1000F/W and Aqua-Buff 2000 are sold as concentrates. The person
doing the polishing adds water by spraying a mist onto the part. The buffing pad captures the
compound/polish, and also the water. When the part appears dry, add more water with the spray
bottle. As long as a milky liquid appears when the pad captures the water additional polish is not
needed. Aqua-
Buff GlossMaster does not require additional water.
4.Heat: a significant benefit of Aqua-Buff is that the sprayed water helps keep the surface cool
during buffing. Heat can cause distortion to appear in the surface.
5.Buffer: we recommend a 2400 rpm commercial buffer. Wiping by hand will not create the
necessary speed and energy to buff. Compound at full speed, polish at half speed.
6.Surfaces: Aqua-Buff works on gelcoat, Duratec and other composite surfaces.
7.After buffing: wash the surface with soapy water to remove any leftover polish.
TIP:
A common question we get is – “What final grit of sandpaper do I need to use?” The answer will
depend on the hardness of the surface (harder requires a finer grit) and the quality of the surface
required. For most gelcoats, a final grit of at least 800 is recommended.
AQUA-BUFF PRODUCT CHOICES see our Aqua-Buff Product Selector for more details
Aqua-
Buff 1000F is FAST. It can be too aggressive for soft surfaces, leaving swirl-marks. It is a
grey-white (referred to as “cookies and cream”) color.
Aqua
-Buff 1000W is a blue-green color. It works very well on most surfaces, but can leave a
blue haze on oxidized gelcoat or white gelcoat.
Aqua-
Buff 2000 is a polish. It is used to remove swirl marks from compounding, or to re-shine
oxidized gelcoat. Aqua-Buff 2000 is a white color and does not leave a haze.
GlossMaster is used when the polisher does not want to use a spray water bottle to leave a fine,
glossy surface.
See the Liability and Warranty Statement on Page 1
AQUA-BUFF PRODUCTS
T
ROUBLESHOOTING | AB1000F, AB1000W, AB2000
WWW.HAWKEYEIND.COM 909-546-1160 HAWKEYESALES@HAWKEYEIND.COM PO BOX 415, BLOOMINGTON, CA 92316
Liability/warranty statement: Our products are intended for sale to industrial and commercial customers. We request that customers inspect and test our
products before use and satisfy themselves as to contents and suitability. All claim requests must be made in writing and are subject to review,
including storage temperature verification and retain evaluations. The exclusive remedy for all proven claims is replacement of our materials and in no
event shall we be liable for special, incidental or consequential damages, including damages caused in transit. Nothing herein shall constitute a
warranty, expressed or implied, including any warranty of merchantability or fitness, nor is protection from any law or patent to be inferred. Aqua Buff is
sold by container and weight is not guaranteed. All patent and trademark rights are reserved.
www.hawkeyeind.com
Application Issue Cause Solution
Burned gelcoat
Speed settings too high.
Dry surface/dry compound
Adjust rotary buffer to ~2500 RPM for
compound, ~1750 for polish. A DA may not
have adjustable speed.
Spritz water on surface to cool and
provide necessary surface lubrication. Keep moving across surface.
Chalky surface
Excess Aqua Buff used
Aqua-Buff compounds cover a lot of
footage. Reduce to 1 poker chip size
amount of compound/polish per square
foot.
Oxidation not removed Compound cut not enough.
Select Aqua-Buff 1000F for
heavy oxidation.
Swirl-Marks
Pad selection is critical. Compound
with a wool pad, polish with a fine
polishing pad.
Buffing pad selection incorrect.
Material selection incorrect.
Aqua-Buff 1000F is fast cut and will
leave swirl marks. Aqua-Buff 2000
is required to remove swirls and
bring out gloss level.
Compound left on surface
Compounds & polishes break down
during application. Resume buffing,
adding water as needed, to work
compound thoroughly.
Quality ConcernComments:
Mousse-like texture
Density variations can occur in
emulsion production resulting in material which can be
creamy or slightly mousse-like. Proceed with use as outlined in application guide.
Exposure to freezing temperatures in storage or transit and generally not a concern for
application. Bring material to room temperature, and test. If needed, add additional water in
application. Do not allow additional freeze/thaw cycles to occur.Icy participles or
slight clumping
Oily liquid or chunks
Rare issue due to extreme heat in storage or transit. Bring material to room temperature, stir
with drill mixer and test. If material does not reconstitute, select new material for use.
by | Sep 27, 2025
Chem-Trend L.P. | 1445 W. McPherson Park | Howell, Michigan 101816
Tel 517.546.4520 | U.S./Canada: 800-727-7730 | Fax: 517-548-5370 | ChemTrend.com
Chemlease
70 EZ
Release Agent
Description
Chemlease
70 EZ is a unique semi- permanent mold
release system developed specifically for the composites
industry, for use where a high quality finish is required.
Benefits
HAPs free*
Multiple releases between applications
Easy to apply
Eliminates the use of wax
Reduces labor time and costs
Provides excellent gloss
High temperature stability
Does not build up on the mold surface
Minimal transfer to molded part
* HAPs are not formula constituents of this product. Standard
manufacturing processes may result in trace quantities
[<0 .1%] of HAPs.
Chemlease
solvent carriers contain no Class I or II registered
ozone depleting substances.
Mold Preparation
1. Mold surfaces should be thoroughly cleaned to remove all traces
of wax, release agents, sealers and buffing compounds.
2. Do a final cleaning of mold surface with
Chemlease
Mold Cleaner.
3. Seal mold with the appropriate Chemlease
Sealer.
Application
1. Mold surface must be thoroughly cleaned to remove all traces
of wax, release agents, and other sealers.
2. Surface should be dry and free of contaminants.
3. Saturate clean cotton cloth (not dripping) and wipe on a smooth
continuous film. Apply no more than a few square feet at a
time.
4. When the film begins to evaporate at the edge, wipe the
surface with a second clean dry cotton cloth. Use a circular
motion from the outside, working inwards until film is left dry
and clear. See Notes.
5. Repeat above procedures until entire mold surface has been
covered.
6. Apply 4-5 coats, allowing 15 minutes between each complete
coat.
7. Allow 30 minutes for full cure. Proceed with production.
Notes
Time will vary with room and mold temperature. Wipe off as the
solvent begins to evaporate. If the release agent is left on too
long, you may notice some smearing or streaking. To remove the
smear or streak, rub the affected area with the recommended
Chemlease
release agent, and then simply remove the excess
sooner than you had before.
Test To Ensure Proper Application
Attach a small strip of masking tape to different areas of the mold.
There should be very little resistance when removing the tape if
proper release is applied. Compare to an untreated mold. (Tape
should adhere to untreated mold).
Touch-Up Coats
Once in production the release film will begin to wear. Rather than
applying a touch-up coat once the parts begin to stick, it is better to
do preventative maintenance. For example, if trials determine that
20 releases are obtainable between touch-up coats, it is better to
reapply a touch-up coat after every 15 cycles or at the end of every
second shift. The above-described action will keep the molds in
production longer and help establish a routine of quality
preventative maintenance.
Important
The recommended number of coats and cure times are a general
guideline found to be more than sufficient in a broad spectrum of
molding conditions. When molding products with extreme
geometries or experiencing low-humidity conditions in the shop,
the customer may find the need to extend the cure time between
coats and increase the number of coats applied to the mold. The
efficiency of a release film is best determined through a
combination of tape tests and experimentation.
Storage
Do not store at temperatures above 49 C/120 F. Keep container
tightly sealed to prevent evaporation and/or contamination. If
stored in cold temperatures allow warming to room temperature
before using.
Packaging
Chemlease
70 EZ is available in a variety of package sizes.
Please contact Chem-Trend customer service for details.
Safety Data
Safety Data Sheets are available for all Chemlease
products and
should be consulted prior to use of the product.
While the technical information and suggestions for use contained herein are believed
to be accurate and reliable, nothing stated in this bulletin is to be taken as a warranty
either expressed or implied.
Further Information
Request information on our complete range of materials: custom-
formulated release agents for polyurethane molding; tire lubes and
bladder coatings; Mono-Coat
semi-permanent release coatings;
aerosol formulations; mold cleaners and sealers; specialized coatings
and application equipment.
by | Sep 27, 2025
by | Sep 27, 2025
1.
Chem-Trend L.P.
1445 W. McPherson Park Drive, P.O. Box 860, Howell, MI 48844.0860
Telephone: 517.546.4520 Facsimile: 517.548.5370 US/Canada: 800.727.7730
Copyright 2004 Chem-Trend L.P., All Rights Reserved
121608
www.chemtrend.com
Description
Chemlease
41-90 EZ is a rapid curing semi-
permanent mold release agent that provides multiple
releases with minimal transfer to the molded part.
Chemlease
41-90 EZ a high slip version of the
Chemlease
41 family; primarily for closed molding of
abrasive or low draft parts.
Benefits
x HAPs Free*
x High thermal stability
x Easy to apply
x Multiple releases between applications.
x Reduces labor time and cost
*HAPs are not formula constituents of this product. Standard
manufacturing processes may result in trace quantities
[<0 .1%] of HAPs.
Chemlease
solvent carriers contain no Class I or II
registered ozone depleting substances.
Mold Preparation
1. Clean mold surface to remove all traces of waxes,
release agents and sealers.
2. Clean mold with Chemlease
Mold Cleaner.
3. Apply the appropriate Chemlease
Sealer to new
or porous molds (contact a Sales Rep or
Distributor for details).
Application Instructions for Base Coats
To the cleaned/sealed mold surface:
1. Using a wetted clean cotton cloth or fine mist
spray pattern, wipe or spray on a smooth, wet,
(not runny) continuous film over the entire mold
surface. With a second, clean, dry cotton cloth,
before film dries wipe off any excess on the mold
surface.
2. Allow film to cure for 15 minutes.
3. Apply a total of 3-5 coats per the above
instructions.
4. Allow final coat to cure for 30 minutes at room
temperature.
Touch-Up Coats
Reapply one light coat as required and cure as for final
coat.
Important
The recommended number of coats and cure times
are a general guideline found to be more than
sufficient in a broad spectrum of molding conditions.
When molding products with extreme geometries or
experiencing low-humidity conditions in the shop, the
customer may find the need to extend the cure time
between coats and increase the number of coats
applied to the mold. The efficiency of a release film is
best determined through a combination of tape tests
and experimentation.
Storage
Do not store above 49 C/120 F. Keep container
tightly sealed to prevent evaporation and/or
contamination. If stored in cold temperatures, allow to
warm to room temperature before using.
Packaging
Chemlease
41-90 EZ is available in 1 gallon, 5
gallon, and 55 gallon quantities.
Safety Data
Material Safety Data Sheets are available for all
Chemlease
products and should be consulted prior to
use of the product.
While the technical information and suggestions for use contained
herein are believed to be accurate and reliable, nothing stated in this
bulletin is to be taken as a warranty either expressed or implied.
Chemlease
41-90 EZ
Semi-Permanent Release Agent
by | Sep 27, 2025
1.
Chem-Trend L.P.
1445 W. McPherson Park Drive, P.O. Box 860, Howell, MI 48844.0860
Telephone: 517.546.4520 Facsimile: 517.548.5370 US/Canada: 800.727.7730
Copyright 2004 Chem-Trend L.P., All Rights Reserved
121608
www.chemtrend.com
Description
Chemlease
41-90 EZ is a rapid curing semi-
permanent mold release agent that provides multiple
releases with minimal transfer to the molded part.
Chemlease
41-90 EZ a high slip version of the
Chemlease
41 family; primarily for closed molding of
abrasive or low draft parts.
Benefits
x HAPs Free*
x High thermal stability
x Easy to apply
x Multiple releases between applications.
x Reduces labor time and cost
*HAPs are not formula constituents of this product. Standard
manufacturing processes may result in trace quantities
[<0 .1%] of HAPs.
Chemlease
solvent carriers contain no Class I or II
registered ozone depleting substances.
Mold Preparation
1. Clean mold surface to remove all traces of waxes,
release agents and sealers.
2. Clean mold with Chemlease
Mold Cleaner.
3. Apply the appropriate Chemlease
Sealer to new
or porous molds (contact a Sales Rep or
Distributor for details).
Application Instructions for Base Coats
To the cleaned/sealed mold surface:
1. Using a wetted clean cotton cloth or fine mist
spray pattern, wipe or spray on a smooth, wet,
(not runny) continuous film over the entire mold
surface. With a second, clean, dry cotton cloth,
before film dries wipe off any excess on the mold
surface.
2. Allow film to cure for 15 minutes.
3. Apply a total of 3-5 coats per the above
instructions.
4. Allow final coat to cure for 30 minutes at room
temperature.
Touch-Up Coats
Reapply one light coat as required and cure as for final
coat.
Important
The recommended number of coats and cure times
are a general guideline found to be more than
sufficient in a broad spectrum of molding conditions.
When molding products with extreme geometries or
experiencing low-humidity conditions in the shop, the
customer may find the need to extend the cure time
between coats and increase the number of coats
applied to the mold. The efficiency of a release film is
best determined through a combination of tape tests
and experimentation.
Storage
Do not store above 49 C/120 F. Keep container
tightly sealed to prevent evaporation and/or
contamination. If stored in cold temperatures, allow to
warm to room temperature before using.
Packaging
Chemlease
41-90 EZ is available in 1 gallon, 5
gallon, and 55 gallon quantities.
Safety Data
Material Safety Data Sheets are available for all
Chemlease
products and should be consulted prior to
use of the product.
While the technical information and suggestions for use contained
herein are believed to be accurate and reliable, nothing stated in this
bulletin is to be taken as a warranty either expressed or implied.
Chemlease
41-90 EZ
Semi-Permanent Release Agent
by | Sep 27, 2025
Technical Data Sheet
Effective: 19/08/2020 Supersedes: 25/07/2019
Page 1 of 3
Automotive Aftermarket Division
3M 36101/36102/36103/36104 Perfect-it Gelcoat Heavy
Cutting Compound
1) Part Numbers
36101 : 473ml
36102 : 946ml
36103 : 3.6l
36104 : 18.9l
2) Description and end uses
3M Perfect-It Gelcoat Medium Cutting Compound + Wax is designed to remove
P800 and finer sand scratches with a 3M compounding pad. It is designed to work
over a broad range of climates. Its non-gritty formula works on all types of gelcoat
surfaces, leaving an extremely fine finish with easy clean up. To reduce compounding
time, refine sanding marks with 3M Trizact 1500 before compounding.
3) Physical Properties
Container Various (See Above)
Colour Cream
Flash Point – C No Flash @ 20 C, 38 C, 60 C or 93 C
Viscosity (CPS) Brookfield
Viscometer
30,000 40,000 cps @ 25 C
Solids Content (Appx.) Trade Secret
Solvent 14.5% VOC
Technical Data Sheet
Effective: 19/08/2020 Supersedes: 25/07/2019
Page 2 of 3
4) Directions for Use
Compound between 1200 and 2000 rpm using a buffer equipped with a 3M wool or
3M foam compounding pad.
1. Apply enough material to work a 2` x 2` area with a thin film throughout the buffing
process. The product is designed to be used wet and buffed with a thin film.
Important: If too much compound is applied to the surface, product may create a
heavy film that reduces workability. If this occurs, remove excess material from both
panel and pad surfaces. Spur buffing pad as necessary.
2. Start buffing with medium pressure between 1200 and 2000 rpm. For optimal finish,
as the product begins to dry, reduce pressure at end of buffing cycle. Product can be
buffed or wiped dry.
3. Use a soft cloth to remove any residual film and/or sling before moving on to another
panel or before polishing.
4. For added protection apply 3M Boat Wax (36112/36113) after compounding is
completed.
5) Storage
Keep from freezing.
6) Safety
Refer to product label and safety data sheet for health and safety information before
using the product.
3M 36101/36102/36103/36104 Perfect-it Gelcoat Heavy Cutting Compound is
designed FOR PROFESSIONAL INDUSTRIAL USE ONLY.
7) Disclaimer
All statements, technical information and recommendations are based on tests we
believe to be reliable as at the date of hereof, but the accuracy or completeness
thereof is not guaranteed. Please ensure before using the product that it is suitable
for your intended use. Since the conditions and methods of use of the product and of
the information referred to herein are beyond our control, other than for fraudulent
Technical Data Sheet
Effective: 19/08/2020 Supersedes: 25/07/2019
Page 3 of 3
misrepresentation, 3M expressly disclaims any and all liability as to any results
obtained or arising from any use of the product or reliance on such information
For Additional Health and Safety Information
3M United Kingdom plc
Automotive Aftermarket
3M Centre,
Cain Road,
Bracknell,
RG12 8HT
Tel: +44 (0)161 237 6391
aadukenquiries@mmm.com
www.3Mbodyshop.co.uk
3M Ireland Limited
Automotive Aftermarket
The Iveagh Building
Carrickmines Park
Carrickmines , Dublin 18
Tel: +353 12160301
aadukenquiries@mmm.com
www.3Mbodyshop.co.uk
3M Denmark a/s
Automotive Aftermarket
Hannemanns All 53
2300 K benhavn S
Tel: +45 43480100
aadukenquiries@mmm.com
www.3MAuto.dk
3M Finland, Suomen 3M Oy
Automotive Aftermarket
Keilaranta 6
02150 Espoo
Tel: 09 5252 1
aadukenquiries@mmm.com
www.3M.fi/autotuotteet
3M Svenska AB
Automotive Aftermarket
Herrj rva torg 4
170 67 Solna
Tel: 08-922100
aadukenquiries@mmm.com
www.3M.se/bileftermarkad
3M Norge AS
Automotive Aftermarket
Kanalveien 2
2004 Lillestr m
Tel: 06384
aadukenquiries@mmm.com
www.3m.no/auto
3M Latvija
K.Ulmana 5
Riga, LV-1004
Tel: +371 67066120
aadukenquiries@mmm.com
www.3m.lv
3M Eesti OU
P rnu mnt. 158
11317 Tallinn
Tel: +372 6 115 902
aadukenquiries@mmm.com
www.3m.ee
3M Lietuva
A.Go tauto str. 40 A
LT-01112 Vilnius
Tel: +370 5 2160780
aadukenquiries@mmm.com
www.3m.lt
3M 2020. 3M, Perfect-It and Trizact are all trademarks of the 3M company. All rights reserved
by | Sep 27, 2025
Page 1 of 2
Perfect-It
EX AC Rubbing Compound
06058 36060 036061 036063
Technical Data June 2018
3M Part Number 3M Part Descriptor
06058 8 oz
36060 Quart
36061 Gallon
36063 2 oz
Product Description The 3M Perfect-It EX AC All Coatings is designed to deliver optimal performance
on today s difficult to buff clear coats or single stage paints. EX AC s unique formula and
new mineral remove sand scratches and other surface defects quickly.
Features Quickly and effectively removes sand scratches
Wetter formulation allows for longer work time without drying
Wipes off easily, requiring less clean up time
Typical Physical Properties
NOTE: The following technical information and data should be considered representative or typical
only and should not be used for specification purposes.
Ph 7.5 -7.9
Color White
Density 8.8 9 lb/gal
Viscosity 30,000 35,000 centipoise
Volatile Organic Compounds 16.2 % weight
Product Uses 3M Perfect-It EX AC Rubbing Compound is designed to remove P1200 and finer
scratches with either a 3M wool or foam compounding pad. The compound is
designed to work over a broad climate range, including extreme conditions. This non-
gritty formula works in all types of automotive paints, leaving an extremely fine finish,
with easy clean up.
Directions for use:
Compound using an air or electric polisher (1200-2000 rpm) equipped with a 3M
wool or 3M foam compounding pad.
1. Apply enough compound to work a 2 x 2 area with a thin film on the surface for
multiple passes before it starts to dry.
06058 36060 036061 036063
Page 2 of 2
Perfect-It
EX AC Rubbing Compound
2. Start buffing with medium pressure. For optimal finish, as the product begins to
dry, reduce pressure at the end of the buffing cycle.
3. Remove any film or splatter using a 3M Perfect-It Detailing Cloth (PN 06016).
Note: If compound slings onto adjacent panel, remove splatter before moving on to
the next panel.
Applications Paint refinishing.
Storage and Handling Keep from freezing.
Precautionary Information
Before using this product, please reference Product Label and/or Safety Data Sheet for Health
and Safety Information. Note: Laws controlling the acceptable amounts of Volatile Organic
Compounds (VOCs) vary by state, and in some cases by locality. For surface preparation and
clean-up activities, consult federal, state and local regulations regarding use of products
containing VOCs in your area.
Technical Information
The technical information, recommendations and other statements contained in this document
are based upon tests or experience that 3M believes are reliable, but the accuracy or
completeness of such information is not guaranteed.
Product Use
Many factors beyond 3M s control and uniquely within the user s knowledge and control can affect
the use and performance of a 3M product in a particular application. Given the variety of factors
that can affect the use and performance of a 3M product, user is solely responsible for evaluating
the 3M product and determining whether it is fit for a purpose and suitable for user s method
of application.
Warranty, Limited Remedy
and Disclaimer
Unless an additional warranty is specifically stated on the applicable 3M product packaging or
product literature, 3M warrants that each 3M product meets the applicable 3M product
specification at the time 3M ships the product. 3M MAKES NO OTHER WARRANTIES OR
CONDITIONS, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED
WARRANTY OR CONDITION OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE OR ANY IMPLIED WARRANTY OR CONDITION ARISING OUT OF A COURSE OF
DEALING, CUSTOM OR USAGE OF TRADE. I f the 3M product does not conform to this warranty,
then the sole and exclusive remedy is, at 3M s option, replacement of the 3M product or refund of
the purchase price.
Limitation of Liability
Except where prohibited by law, 3M will not be liable for any loss or damage arising from the 3M
product, whether direct, indirect, special, incidental or consequential, regardless of the legal theory
asserted, including warranty, contract, negligence or strict liability.
Automotive Aftermarket Division
3M Center, Building 0223-6-S-01
St. Paul, MN 55144-1000
1-877-666-2277 (1-877-MMM-CARS)
3MCollsion.com
3M is a trademark of 3M.
Printed in U.S.A. 3M 2018 All rights reserved (06/18)
by | Sep 27, 2025
