37ZYVAX50_SDS.pdf

by | Sep 27, 2025

37ZYVAX1070_SDS.pdf

by | Sep 27, 2025

37ZYVAX1050_SDS.pdf

by | Sep 27, 2025

37XTR_SDS.pdf

by | Sep 27, 2025

Page 1/16
Safety Data Sheet
acc. to OSHA HCS
Printing date 11/26/2019 Reviewed on 11/26/2019
49.0
1 Identification
Product identifier
Trade name: XTEND XTR
Application of the substance / the mixtureMold conditioner and sealer
Details of the supplier of the safety data sheet
Manufacturer/Supplier:
Axel Plastics Research Laboratories, Inc.
50 Cambridge Drive
Monroe, CT 06468 USA
info@axelplastics.com
Information department:Product safety department
Emergency telephone number:
USA and Canada: 1-800-424-9300 (24 hours)
Outside of USA and Canada: 001-703-527-3887 (24 hours)
2 Hazard(s) identification
Classification of the substance or mixture
d~
GHS02 Flame
Flam. Liq. 3 H226 Flammable liquid and vapor.
d~
GHS08 Health hazard
Carc. 2 H351 Suspected of causing cancer.
Repr. 2 H361 Suspected of damaging fertility or the unborn child.
STOT RE 1 H372 Causes damage to the central nervous system through prolonged or repeated exposure.
Asp. Tox. 1 H304 May be fatal if swallowed and enters airways.
d~
GHS05 Corrosion
Eye Dam. 1 H318 Causes serious eye damage.
d~
GHS07
Skin Irrit. 2 H315 Causes skin irritation.
STOT SE 3 H335-H336 May cause respiratory irritation. May cause drowsiness or dizziness.
Label elements
GHS label elementsThe product is classified and labeled according to the Globally Harmonized System (GHS).
Hazard pictograms
d~
GHS02
d~
GHS05
d~
GHS07
d~
GHS08
Signal wordDanger
(Contd. on page 2)
US

Page 2/16
Safety Data Sheet
acc. to OSHA HCS
Printing date 11/26/2019 Reviewed on 11/26/2019
Trade name: XTEND XTR
(Contd. of page 1)
49.0
Hazard-determining components of labeling:
Stoddard solvent
Proprietary/Alternative Chemical Name Pending
Proprietary/Alternative Chemical Name Pending
Naphtha (petroleum), light alkylate
Hazard statements
Flammable liquid and vapor.
Causes skin irritation.
Causes serious eye damage.
Suspected of causing cancer.
Suspected of damaging fertility or the unborn child.
May cause respiratory irritation. May cause drowsiness or dizziness.
Causes damage to the central nervous system through prolonged or repeated exposure.
May be fatal if swallowed and enters airways.
Precautionary statements
Obtain special instructions before use.
Do not handle until all safety precautions have been read and understood.
Keep away from heat/sparks/open flames/hot surfaces. – No smoking.
Ground/bond container and receiving equipment.
Use explosion-proof electrical/ventilating/lighting/equipment.
Use only non-sparking tools.
Take precautionary measures against static discharge.
Do not breathe dust/fume/gas/mist/vapors/spray.
Wash thoroughly after handling.
Do not eat, drink or smoke when using this product.
Use only outdoors or in a well-ventilated area.
Wear protective gloves/protective clothing/eye protection/face protection.
If swallowed: Immediately call a poison center/doctor.
Specific treatment (see on this label).
Do NOT induce vomiting.
If on skin (or hair): Take off immediately all contaminated clothing. Rinse skin with water/shower.
IF INHALED: Remove person to fresh air and keep comfortable for breathing.
If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do.
Continue rinsing.
IF exposed or concerned: Get medical advice/attention.
Call a poison center/doctor if you feel unwell.
Get medical advice/attention if you feel unwell.
Take off contaminated clothing and wash it before reuse.
If skin irritation occurs: Get medical advice/attention.
In case of fire: Use for extinction: CO2, powder or water spray.
Store in a well-ventilated place. Keep container tightly closed.
Store in a well-ventilated place. Keep cool.
Store locked up.
Dispose of contents/container in accordance with local/regional/national/international regulations.
Classification system:
NFPA ratings (scale 0 – 4)
3
3
0
Health = 3
Fire = 3
Reactivity = 0
(Contd. on page 3)
US

Page 3/16
Safety Data Sheet
acc. to OSHA HCS
Printing date 11/26/2019 Reviewed on 11/26/2019
Trade name: XTEND XTR
(Contd. of page 2)
49.0
HMIS-ratings (scale 0 – 4)
HEALTH
FIRE
REACTIVITY
3
3
0
Health = 3
Fire = 3
Reactivity = 0
Other hazards
Results of PBT and vPvB assessment
PBT:Not applicable.
vPvB:Not applicable.
3 Composition/information on ingredients
Chemical characterization: Mixtures
Description:Mixture of the substances listed below with nonhazardous additions.
Component Information:
8052-41-3 Stoddard solvent 50 75%
142-96-1 di-n-butyl ether 10 25%
64741-66-8 Naphtha (petroleum), light alkylate 2.5 < 10% 64742-48-9 Naphtha (petroleum), hydrotreated heavy 2.5 10% 95-63-6 1,2,4-trimethylbenzene 2.5 < 10% 111-84-2 nonane 2.5 10% Proprietary/Alternative Chemical Name Pending 2.5 < 5% Proprietary/Alternative Chemical Name Pending 1 2.5% 108-88-3 toluene 0.1 2.5% 91-20-3 naphthalene 0.1 2.5% 100-41-4 ethylbenzene 0.1 2.5% 4 First-aid measures Description of first aid measures General information: Immediately remove any clothing soiled by the product. Symptoms of poisoning may even occur after several hours; therefore medical observation for at least 48 hours after the accident. After inhalation:In case of unconsciousness place patient stably in side position for transportation. After skin contact:Immediately wash with water and soap and rinse thoroughly. After eye contact:Rinse opened eye for several minutes under running water. Then consult a doctor. After swallowing:If symptoms persist consult doctor. Information for doctor: Most important symptoms and effects, both acute and delayedNo further relevant information available. Indication of any immediate medical attention and special treatment needed No further relevant information available. 5 Fire-fighting measures Extinguishing media Suitable extinguishing agents: CO2, extinguishing powder or water spray. Fight larger fires with water spray or alcohol resistant foam. (Contd. on page 4) US Page 4/16 Safety Data Sheet acc. to OSHA HCS Printing date 11/26/2019 Reviewed on 11/26/2019 Trade name: XTEND XTR (Contd. of page 3) 49.0 For safety reasons unsuitable extinguishing agents:Water with full jet Special hazards arising from the substance or mixture During heating or in case of fire poisonous gases are produced. Advice for firefighters Protective equipment:Mouth respiratory protective device. 6 Accidental release measures Personal precautions, protective equipment and emergency procedures Mount respiratory protective device. Wear protective equipment. Keep unprotected persons away. Ensure adequate ventilation No action shall be taken involving any personal risk or without suitable training. Evacuate surrounding areas. Keep unnecessary and unprotected personnel from entering. Do not touch or walk through spilled material. Do not breathe vapor or mist. Provide adequate ventilation. Wear appropriate respirator when ventilation is inadequate. Put on appropriate personal protective equipment. Environmental precautions: Avoid dispersal of spilled material and runoff and contact with soil, waterways, drains and sewers. Inform the relevant authorities if the product has caused environmental pollution (sewers, waterways, soil or air). Do not allow to enter sewers/ surface or ground water. Methods and material for containment and cleaning up: Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust). Use neutralizing agent. Dispose contaminated material as waste according to item 13. Ensure adequate ventilation. Small spill: Stop leak if without risk. Move containers from spill area. Dilute with water and mop up if water- soluble. Alternatively, or if water-insoluble, absorb with an inert dry material and place in an appropriate waste disposal container. Dispose of via a licensed waste disposal contractor. Large spill: Stop leak if without risk. Move containers from spill area. Approach release from upwind. Prevent entry into sewers, water courses, basements or confined areas. Wash spillage into an effluent treatment plant or proceed as follow. Contain and collect spillage with non-combustible, absorbent material e.g. sand, earth, vermiculite or diatomaceous earth and place in container for disposal according to local regulations (see Section 13). Dispose of via a licensed waste disposal contractor. Contaminated absorbent material may pose the same hazard as the spilled product. Note: See Section 1 for emergency contact information and Section 13 for waste disposal. Reference to other sections See Section 7 for information on safe handling. See Section 8 for information on personal protection equipment. See Section 13 for disposal information. 7 Handling and storage Handling: Precautions for safe handling Store in cool, dry place in tightly closed receptacles. Ensure good ventilation/exhaustion at the workplace. Open and handle receptacle with care. Prevent formation of aerosols. Put on appropriate personal protective equipment (see Section 8). Do not ingest. Avoid contact with eyes, skin and clothing. Avoid breathing vapor or mist. Avoid release to the environment. Use only with adequate ventilation. Wear appropriate respirator when ventilation is inadequate. Keep in the original container or an approved alternative made from a compatible material, kept tightly closed when not in use. Empty containers retain product residue and can be hazardous. Do not reuse container. (Contd. on page 5) US Page 5/16 Safety Data Sheet acc. to OSHA HCS Printing date 11/26/2019 Reviewed on 11/26/2019 Trade name: XTEND XTR (Contd. of page 4) 49.0 Information about protection against explosions and fires: Keep ignition sources away - Do not smoke. Protect against electrostatic charges. Keep respiratory protective device available. Conditions for safe storage, including any incompatibilities Store in accordance with local regulations. Store in original container protected from direct sunlight in a dry, cool and well-ventilated area, away from incompatible materials (see Section 10) and food and drink. Avoid freezing. Keep container tightly closed and sealed until ready for use. Containers that have been opened must be carefully resealed and kept upright to prevent leakage. Do not store in unlabeled containers. Use appropriate containment to avoid environmental contamination. Storage: Requirements to be met by storerooms and receptacles:No special requirements. Information about storage in one common storage facility:Not required. Further information about storage conditions:Keep receptacle tightly sealed. Specific end use(s)No further relevant information available. 8 Exposure controls/personal protection Additional information about design of technical systems:No further data; see item 7. Control parameters Components with limit values that require monitoring at the workplace: The following constituents are the only constituents of the product which have a PEL, TLV or other recommended exposure limit. At this time, the other constituents have no known exposure limits. 8052-41-3 Stoddard solvent PEL Long-term value: 2900 mg/m , 500 ppm REL Long-term value: 350 mg/m Ceiling limit value: 1800* mg/m *15-min TLV Long-term value: 525 mg/m , 100 ppm 95-63-6 1,2,4-trimethylbenzene REL Long-term value: 125 mg/m , 25 ppm TLV Long-term value: 123 mg/m , 25 ppm 111-84-2 nonane REL Long-term value: 1050 mg/m , 200 ppm TLV Long-term value: 1050 mg/m , 200 ppm Proprietary/Alternative Chemical Name Pending REL Long-term value: 40 mg/m , 10 ppm TLV Long-term value: 41 mg/m , 10 ppm 108-88-3 toluene PEL Long-term value: 200 ppm Ceiling limit value: 300; 500* ppm *10-min peak per 8-hr shift REL Short-term value: 560 mg/m , 150 ppm Long-term value: 375 mg/m , 100 ppm TLV Long-term value: 75 mg/m , 20 ppm BEI (Contd. on page 6) US Page 6/16 Safety Data Sheet acc. to OSHA HCS Printing date 11/26/2019 Reviewed on 11/26/2019 Trade name: XTEND XTR (Contd. of page 5) 49.0 91-20-3 naphthalene PEL Long-term value: 50 mg/m , 10 ppm REL Short-term value: 75 mg/m , 15 ppm Long-term value: 50 mg/m , 10 ppm TLV Long-term value: 52 mg/m , 10 ppm Skin; BEI 100-41-4 ethylbenzene PEL Long-term value: 435 mg/m , 100 ppm REL Short-term value: 545 mg/m , 125 ppm Long-term value: 435 mg/m , 100 ppm TLV Long-term value: 87 mg/m , 20 ppm BEI Ingredients with biological limit values: 108-88-3 toluene BEI 0.02 mg/L Medium: blood Time: prior to last shift of workweek Parameter: Toluene 0.03 mg/L Medium: urine Time: end of shift Parameter: Toluene 0.3 mg/g creatinine Medium: urine Time: end of shift Parameter: o-Cresol with hydrolysis (background) 100-41-4 ethylbenzene BEI 0.7 g/g creatinine Medium: urine Time: end of shift at end of workweek Parameter: Sum of mandelic acid and phenylglyoxylic acid (nonspecific, semi-quantitative) - Medium: end-exhaled air Time: not critical Parameter: Ethyl benzene (semi-quantitative) Additional information:The lists that were valid during the creation were used as basis. Exposure controls Personal protective equipment: General protective and hygienic measures: Keep away from foodstuffs, beverages and feed. Immediately remove all soiled and contaminated clothing. Wash hands before breaks and at the end of work. Store protective clothing separately. Avoid contact with the skin. Avoid contact with the eyes and skin. Breathing equipment: If a risk assessment indicates engineering controls are not sufficient to protect worker health or comply with relevant legislation, use an approved respirator. Respirator selection must be based on known or anticipated (Contd. on page 7) US Page 7/16 Safety Data Sheet acc. to OSHA HCS Printing date 11/26/2019 Reviewed on 11/26/2019 Trade name: XTEND XTR (Contd. of page 6) 49.0 exposure levels, the hazards of the product and the safe working limits of the selected respirator. Respirators to be considered for this material include: Half-face filter respirator with Type A filter material. For the European Union, refer to Standardization (CEN) standards EN 136, 140 and 405 for respirator masks and EN 149 and 143 for filter recommendations. In the United States of America, refer to OSHA Respiratory Protection Standard, 29 CFR 1910.134 and ANSI Z88.2 for respiratory selection, use and maintenance. Protection of hands: _S Hand Protection: Glove suitability depends on the conditions of use. Use gauntlet style gloves if forearms are likely to be exposed. Contact glove manufacturer for appropriate glove selection. Minimally, chemical resistant gloves in accordance with CEN standards EN 420 and EN 374 should be used. Skin Protection: Chemical/oil resistant clothing is recommended. The glove material has to be impermeable and resistant to the product/ the substance/ the preparation. Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation Material of gloves The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer. As the product is a preparation of several substances, the resistance of the glove material can not be calculated in advance and has therefore to be checked prior to the application. Penetration time of glove material The exact break through time has to be found out by the manufacturer of the protective gloves and has to be observed. Eye protection: _R Chemical safety glasses with side shields, goggles or face shield. Do not wear contact lenses. Body protection:Protective work clothing 9 Physical and chemical properties Information on basic physical and chemical properties General Information Appearance: Form: Fluid Color: Yellowish Odor: Paraffinic Odor threshold: Not determined. pH-value: Not determined. Change in condition Melting point/Melting range: Undetermined. Boiling point/Boiling range: 110 - 177 C Flash Point (C.O.C.): 32 C (89.6 F) Percentage Volatile > 98 %
Decomposition temperature: Not determined.
Auto igniting: Product is not selfigniting.
Danger of explosion: Product is not explosive. However, formation of explosive air/vapor
mixtures are possible.
Explosion limits:
Lower: Not determined.
Upper: Not determined.
(Contd. on page 8)
US

Page 8/16
Safety Data Sheet
acc. to OSHA HCS
Printing date 11/26/2019 Reviewed on 11/26/2019
Trade name: XTEND XTR
(Contd. of page 7)
49.0
Oxidizing properties Not determined.
Vapor pressure at 50 C (122 F):70 hPa (52.5 mm Hg)
Density: Not determined.
Relative density 0.774
Vapor density Not determined.
Evaporation rate Not determined.
Solubility in / Miscibility with
Water: Not miscible or difficult to mix.
Partition coefficient (n-octanol/water):Not determined.
Viscosity: < 15 cps @ 25C Dynamic: Not determined. Kinematic: Not determined. VOC content: Not determined. VOC 6.3 lb/gal Other information No further relevant information available. 10 Stability and reactivity ReactivityNo further relevant information available. Chemical stabilityThe product is stable under recommended storage conditions. Thermal decomposition / conditions to be avoided: No decomposition if used according to specifications. Stable at ambient temperature. Possibility of hazardous reactionsNo dangerous reactions known. Conditions to avoidNo further relevant information available. Incompatible materials:No further relevant information available. Hazardous decomposition products:No dangerous decomposition products known. 11 Toxicological information Information on toxicological effects Acute toxicity: LD/LC50 values that are relevant for classification: ATE (Acute Toxicity Estimate) Oral LD50 5,785 mg/kg Dermal LD50 11,541 mg/kg Inhalative LC50/4 h 367 mg/l 142-96-1 di-n-butyl ether Oral LD50 7,400 mg/kg (rat) Dermal LD50 10,000 mg/kg (rabbit) 64742-48-9 Naphtha (petroleum), hydrotreated heavy Oral LD50 > 5,000 mg/kg (rat)
Dermal LD50 > 5,000 mg/kg (rab)
95-63-6 1,2,4-trimethylbenzene
Oral LD50 5,000 mg/kg (rat)
(Contd. on page 9)
US

Page 9/16
Safety Data Sheet
acc. to OSHA HCS
Printing date 11/26/2019 Reviewed on 11/26/2019
Trade name: XTEND XTR
(Contd. of page 8)
49.0
Inhalative LC50/4 h 11 mg/l (ATE)
91-20-3 naphthalene
Oral LD50 490 mg/kg (rat)
Dermal LD50 5,000 mg/kg (rat)
Primary irritant effect:
on the skin:Irritant to skin and mucous membranes.
on the eye:Strong irritant with the danger of severe eye injury.
Sensitization:No sensitizing effects known.
Additional toxicological information:
The product shows the following dangers according to internally approved calculation methods for preparations:
Irritant
Carcinogenic categories
IARC (International Agency for Research on Cancer)
108-88-3 toluene 3
91-20-3 naphthalene 2B
100-41-4 ethylbenzene 2B
NTP (National Toxicology Program)
91-20-3 naphthalene R
OSHA-Ca (Occupational Safety & Health Administration)
None of the ingredients is listed.
IARC Monographs
Group 1: Carcinogenic to humans
Group 2A: Probably carcinogenic to humans
Group 2B: Possibly carcinogenic to humans
Group 3: Not classifiable as to its carcinogenicity to humans
Group 4: Probably not carcinogenic to humans
12 Ecological information
Toxicity
Aquatic toxicity:No further relevant information available.
Persistence and degradabilityNo further relevant information available.
Behavior in environmental systems:
Bioaccumulative potentialNo further relevant information available.
Mobility in soilNo further relevant information available.
Additional ecological information:
General notes:
Water hazard class 2 (Self-assessment): hazardous for water
Do not allow product to reach ground water, water course or sewage system.
Must not reach bodies of water or drainage ditch undiluted or unneutralized.
Danger to drinking water if even small quantities leak into the ground.
Results of PBT and vPvB assessment
PBT:Not applicable.
vPvB:Not applicable.
Other adverse effectsNo further relevant information available.
US
(Contd. on page 10)

Page 10/16
Safety Data Sheet
acc. to OSHA HCS
Printing date 11/26/2019 Reviewed on 11/26/2019
Trade name: XTEND XTR
(Contd. of page 9)
49.0
13 Disposal considerations
Waste treatment methods
Recommendation:
Must not be disposed of together with household garbage. Do not allow product to reach sewage system.
The generation of waste should be avoided or minimized wherever possible. Disposal of this product, solutions
and any by-products should at all times comply with the requirements of environmental protection and waste
disposal legislation and any regional local authority requirements. Dispose of surplus and non-recyclable products
via a licensed waste disposal contractor. Waste should not be disposed of untreated to the sewer unless fully
compliant with the requirements of all authorities with jurisdiction.
The classification of the product may meet the criteria for a hazardous waste.
Uncleaned packagings:
Recommendation:
The generation of waste should be avoided or minimized wherever possible. Waste packaging should be recycled.
Incineration or landfill should only be considered when recycling is not feasible.
This material and its container must be disposed of in a safe way. Care should be taken when handling emptied
containers that have not been cleaned or rinsed out. Empty containers or liners may retain some product residues.
Avoid dispersal of spilled material and runoff and contact with soil, waterways, drains and sewers.
* 14 Transport information
UN-Number
DOT, IMDG, IATA UN1866
UN proper shipping name
DOT Resin solution
IMDG RESIN SOLUTION (Petroleum Distillates), MARINE
POLLUTANT
IATA RESIN SOLUTION
Transport hazard class(es)
DOT
dc`gx d
Class 3 Flammable liquids
Label 3
IMDG
dc`gxd
Class 3 Flammable liquids
Label 3
(Contd. on page 11)
US

Page 11/16
Safety Data Sheet
acc. to OSHA HCS
Printing date 11/26/2019 Reviewed on 11/26/2019
Trade name: XTEND XTR
(Contd. of page 10)
49.0
IATA
dc`gx
Class 3 Flammable liquids
Label 3
Packing group
DOT, IMDG, IATA III
Environmental hazards:
Marine pollutant: Yes (DOT)
Symbol (fish and tree)
Special precautions for user Warning: Flammable liquids
EMS Number: F-E,S-E
Transport in bulk according to Annex II of
MARPOL73/78 and the IBC Code Not applicable.
Transport/Additional information:
DOT
Remarks: Special marking with the symbol (fish and tree).
IMDG
Remarks: Marine Pollutant: Stoddard Solvent
UN “Model Regulation”: UN 1866 RESIN SOLUTION, 3, III, ENVIRONMENTALLY
HAZARDOUS
15 Regulatory information
Safety, health and environmental regulations/legislation specific for the substance or mixture
Sara
Section 313 (Specific toxic chemical listings):
95-63-6 1,2,4-trimethylbenzene
108-88-3 toluene
91-20-3 naphthalene
100-41-4 ethylbenzene
TSCA (Toxic Substances Control Act): (Substances not listed)
All ingredients are listed.
Hazardous Air Pollutants
108-88-3 toluene
91-20-3 naphthalene
100-41-4 ethylbenzene
540-84-1 2,2,4-trimethylpentane
71-43-2 benzene
(Contd. on page 12)
US

Page 12/16
Safety Data Sheet
acc. to OSHA HCS
Printing date 11/26/2019 Reviewed on 11/26/2019
Trade name: XTEND XTR
(Contd. of page 11)
49.0
Proposition 65
Chemicals known to cause cancer:
91-20-3 naphthalene
100-41-4 ethylbenzene
71-43-2 benzene
Chemicals known to cause reproductive toxicity for females:
None of the ingredients is listed.
Chemicals known to cause reproductive toxicity for males:
71-43-2 benzene
Chemicals known to cause developmental toxicity:
108-88-3 toluene
71-43-2 benzene
US State Regulations
Connecticut – Hazardous Air Pollutants – HLVs (30 min)
None of the ingredients is listed.
Connecticut – Hazardous Air Pollutants – HLVs (8 hr)
None of the ingredients is listed.
Idaho – Non-Carcinogenic Toxic Air Pollutants – Emission Levels (ELs)
None of the ingredients is listed.
Idaho – Non-Carcinogenic Toxic Air Pollutants – Acceptable Ambient Concentrations
None of the ingredients is listed.
Occupational Exposure Limits – TWAs
None of the ingredients is listed.
Michigan – Occupational Exposure Limits – Skin Designations
None of the ingredients is listed.
Michigan – Occupational Exposure Limits – TWAs
None of the ingredients is listed.
Minnesota – Hazardous Substance List
None of the ingredients is listed.
Minnesota – Permissible Exposure Limits – Skin Designations
None of the ingredients is listed.
Minnesota – Permissible Exposure Limits – TWAs
None of the ingredients is listed.
New Hampshire – Regulated Toxic Air Pollutants – Ambient Air Levels (AALs) – 24-Hour
None of the ingredients is listed.
New Hampshire – Regulated Toxic Air Pollutants – Ambient Air Levels (AALs) – Annual
None of the ingredients is listed.
New York – Occupational Exposure Limits – Skin Designations
None of the ingredients is listed.
New York – Occupational Exposure Limits – TWAs
None of the ingredients is listed.
North Dakota – Air Pollutants – Guideline Concentrations – 1-Hour
None of the ingredients is listed.
(Contd. on page 13)
US

Page 13/16
Safety Data Sheet
acc. to OSHA HCS
Printing date 11/26/2019 Reviewed on 11/26/2019
Trade name: XTEND XTR
(Contd. of page 12)
49.0
North Dakota – Air Pollutants – Guideline Concentrations – 8-Hour
None of the ingredients is listed.
Oregon – Permissible Exposure Limits – TWAs
None of the ingredients is listed.
Tennessee – Occupational Exposure Limits – Skin Designations
None of the ingredients is listed.
Tennessee – Occupational Exposure Limits – TWAs
None of the ingredients is listed.
Texas – Effects Screening Levels – Long Term
None of the ingredients is listed.
Texas – Effects Screening Levels – Short Term
None of the ingredients is listed.
Vermont – Permissible Exposure Limits – Skin Designations
None of the ingredients is listed.
Vermont – Permissible Exposure Limits – TWAs
None of the ingredients is listed.
Washington – Permissible Exposure Limits – Skin Designations
None of the ingredients is listed.
Washington – Permissible Exposure Limits – STELs
None of the ingredients is listed.
Washington – Permissible Exposure Limits – TWAs
None of the ingredients is listed.
Wisconsin – Hazardous Air Contaminants – All Sources – Emissions From Stack Heights 25 Feet to Less
Than 40 Feet
None of the ingredients is listed.
Wisconsin – Hazardous Air Contaminants – All Sources – Emissions From Stack Heights 40 Feet to Less
Than 75 Feet
None of the ingredients is listed.
Wisconsin – Hazardous Air Contaminants – All Sources – Emissions From Stack Heights 75 Feet or Greater
None of the ingredients is listed.
Wisconsin – Hazardous Air Contaminants – All Sources – Emissions From Stack Heights Less Than 25 Feet
None of the ingredients is listed.
Carcinogenic categories
EPA (Environmental Protection Agency)
95-63-6 1,2,4-trimethylbenzene II
108-88-3 toluene II
91-20-3 naphthalene C, CBD
100-41-4 ethylbenzene D
NIOSH-Ca (National Institute for Occupational Safety and Health)
None of the ingredients is listed.
EPA Carcinogen Category Key
EPA 2005 Guidelines:
CaH – Carcinogenic to humans.
L – Likely to be carcinogenic to humans.
SC – Suggestive evidence of carcinogenic potential.
(Contd. on page 14)
US

Page 14/16
Safety Data Sheet
acc. to OSHA HCS
Printing date 11/26/2019 Reviewed on 11/26/2019
Trade name: XTEND XTR
(Contd. of page 13)
49.0
II – Inadequate information to assess carcinogenic potential.
NL – Not likely to be carcinogenic to humans.
EPA 1999 Guidelines:
CaH – Carcinogenic to humans.
L – Likely to be carcinogenic to humans.
S – Suggestive evidence of carcinogenicity, but not sufficient to assess human carcinogenic potential.
I – Data are inadequate for an assessment of human carcinogenic potential.
NL – Not likely to be carcinogenic to humans.
EPA 1996 Guidelines:
K/L – Known/likely human carcinogen.
CBD – Carcinogenic potential cannot be determined.
NL – Not likely to be carcinogenic to humans.
EPA 1986 Guidelines:
A – Human carcinogen
B1 – Probable human carcinogen – based on limited evidence of carcinogenicity in humans and sufficient evidence
of carcinogenicity in animals.
B2 – Probable human carcinogen – based on sufficient evidence of carcinogenicity in animals.
C – Possible human carcinogen.
D – Not classifiable as to human carcinogenicity.
E – Evidence of non-carcinogenicity for humans.
GHS label elementsThe product is classified and labeled according to the Globally Harmonized System (GHS).
Hazard pictograms
d~
GHS02
d~
GHS05
d~
GHS07
d~
GHS08
Signal wordDanger
Hazard-determining components of labeling:
Stoddard solvent
Proprietary/Alternative Chemical Name Pending
Proprietary/Alternative Chemical Name Pending
Naphtha (petroleum), light alkylate
Hazard statements
Flammable liquid and vapor.
Causes skin irritation.
Causes serious eye damage.
Suspected of causing cancer.
Suspected of damaging fertility or the unborn child.
May cause respiratory irritation. May cause drowsiness or dizziness.
Causes damage to the central nervous system through prolonged or repeated exposure.
May be fatal if swallowed and enters airways.
Precautionary statements
Obtain special instructions before use.
Do not handle until all safety precautions have been read and understood.
Keep away from heat/sparks/open flames/hot surfaces. – No smoking.
Ground/bond container and receiving equipment.
Use explosion-proof electrical/ventilating/lighting/equipment.
Use only non-sparking tools.
Take precautionary measures against static discharge.
(Contd. on page 15)
US

Page 15/16
Safety Data Sheet
acc. to OSHA HCS
Printing date 11/26/2019 Reviewed on 11/26/2019
Trade name: XTEND XTR
(Contd. of page 14)
49.0
Do not breathe dust/fume/gas/mist/vapors/spray.
Wash thoroughly after handling.
Do not eat, drink or smoke when using this product.
Use only outdoors or in a well-ventilated area.
Wear protective gloves/protective clothing/eye protection/face protection.
If swallowed: Immediately call a poison center/doctor.
Specific treatment (see on this label).
Do NOT induce vomiting.
If on skin (or hair): Take off immediately all contaminated clothing. Rinse skin with water/shower.
IF INHALED: Remove person to fresh air and keep comfortable for breathing.
If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do.
Continue rinsing.
IF exposed or concerned: Get medical advice/attention.
Call a poison center/doctor if you feel unwell.
Get medical advice/attention if you feel unwell.
Take off contaminated clothing and wash it before reuse.
If skin irritation occurs: Get medical advice/attention.
In case of fire: Use for extinction: CO2, powder or water spray.
Store in a well-ventilated place. Keep container tightly closed.
Store in a well-ventilated place. Keep cool.
Store locked up.
Dispose of contents/container in accordance with local/regional/national/international regulations.
National regulations:
The components of this product are listed on the USA (TSCA) inventory.
The components of this product are listed on the Canadian (DSL) inventory.
The components of this product are listed on the European (EINECS) inventory.
Other regulations, limitations and prohibitive regulations
Substances of very high concern (SVHC) according to REACH, Article 57
None of the ingredients is listed.
Chemical safety assessment:A Chemical Safety Assessment has not been carried out.
16 Other information
Disclaimer: This data is offered in good faith as typical values and not as a product specification. No warranty,
either expressed or implied, is hereby made. The recommended industrial hygiene and safe handling procedures
are believed to be generally applicable. However, each user should review recommendations in the specific context
of the intended use and determine whether they are appropriate.
Procedure used to derive the classification
Test data.
Calculation method.
Contact:info@axelplastics.com
Date of preparation / last revision11/26/2019 / 21
Abbreviations and acronyms:
IMDG: International Maritime Code for Dangerous Goods
DOT: US Department of Transportation
IATA: International Air Transport Association
EINECS: European Inventory of Existing Commercial Chemical Substances
ELINCS: European List of Notified Chemical Substances
CAS: Chemical Abstracts Service (division of the American Chemical Society)
NFPA: National Fire Protection Association (USA)
HMIS: Hazardous Materials Identification System (USA)
VOC: Volatile Organic Compounds (USA, EU)
LC50: Lethal concentration, 50 percent
LD50: Lethal dose, 50 percent
(Contd. on page 16)
US

Page 16/16
Safety Data Sheet
acc. to OSHA HCS
Printing date 11/26/2019 Reviewed on 11/26/2019
Trade name: XTEND XTR
(Contd. of page 15)
49.0
PBT: Persistent, Bioaccumulative and Toxic
SVHC: Substances of Very High Concern
vPvB: very Persistent and very Bioaccumulative
NIOSH: National Institute for Occupational Safety
OSHA: Occupational Safety & Health
TLV: Threshold Limit Value
PEL: Permissible Exposure Limit
REL: Recommended Exposure Limit
BEI: Biological Exposure Limit
Flam. Liq. 3: Flammable liquids Category 3
Skin Irrit. 2: Skin corrosion/irritation Category 2
Eye Dam. 1: Serious eye damage/eye irritation Category 1
Carc. 2: Carcinogenicity Category 2
Repr. 2: Reproductive toxicity Category 2
STOT SE 3: Specific target organ toxicity (single exposure) Category 3
STOT RE 1: Specific target organ toxicity (repeated exposure) Category 1
Asp. Tox. 1: Aspiration hazard Category 1
* Data compared to the previous version altered.
US

37WOLO_SDS.pdf

by | Sep 27, 2025

Safety Data Sheet

Revision Number: 006.0 Issue date: 10/14/2020

IDH number: 420481 Product name: FRKOTE WOLO PART NO. 83634 MOLD RELEASE AGENT
Page 1 of 5

1. PRODUCT AND COMPANY IDENTIFICATION

Product name: FRKOTE WOLO PART NO. 83634
MOLD RELEASE AGENT
IDH number: 420481
Product type/use: Mold Release Item number: 83634
Restriction of Use: None identified Region: United States
Company address: Contact information:
Henkel Corporation
One Henkel Way
Rocky Hill, Connecticut 06067
Telephone: +1 (860) 571-5100
MEDICAL EMERGENCY Phone: Poison Control Center
1-877-671-4608 (toll free) or 1-303-592-1711
TRANSPORT EMERGENCY Phone: CHEMTREC
1-800-424-9300 (toll free) or 1-703-527-3887
Internet: www.henkelna.com

Contains one or more components for which a Toxic Substances Control Act (TSCA) Low Volume Exemption (LVE)
applies. See Section 15.

2. HAZARDS IDENTIFICATION

EMERGENCY OVERVIEW
DANGER: HIGHLY FLAMMABLE LIQ UID AND VAPOR.
MAY BE FATAL IF SWALLOWED AND ENTERS AIR WAYS.
CAUSES SKIN IRRITATION.
MAY CAUSE DROWSINESS OR DIZZINESS.

HAZARD CLASS HAZARD CATEGORY
FLAMMABLE LIQUID 2
SKIN IRRITATION 2
SPECIFIC TARGET ORGA N TOXICITY – SINGLE EXPOSURE 3
ASPIRATION HAZARD 1

PICTOGRAM(S)

Precautionary Statements

Prevention: Keep away from heat, sparks, open flames, hot surfaces – no smoking. Keep container tightly
closed. No release into water. Use explosion-proof equipment. Use non-sparking tools. Take
action to prevent static discharges. Avoid breathing vapors, mist, or spray. Wash affected area
thoroughly after handling. Use only outdoors or in a well-ventilated area. Wear protective
gloves, eye protection, and face protection.
Response: IF SWALLOWED: Immediately call a physician or poison control center. If on skin (or hair):
Take off immediately all contaminated clothing. IF INHALED: Remove victim to fresh air and
keep at rest in a position comfortable for breathing. Call a POISON CENTER or physician if you
feel unwell. Do NOT induce vomiting. If skin irritation occurs: Get medical attention. Take off
contaminated clothing. In case of fire: Use foam, dry chemical or carbon dioxide to extinguish.
Storage: Store in a well-ventilated place. Keep container tightly closed. Store in a well-ventilated place.
Keep cool. Store locked up.
Disposal: Dispose of contents and/or container according to Federal, State/Provincial and local
governmental regulations.

Classification complies with OSHA Hazard Communication Standard (29 CFR 1910.1200) and is consistent with the provisions of the
United Nations Globally Harmonized System of Classification and Labeling of Chemicals (GHS).

See Section 11 for additional toxicological information.

IDH number: 420481 Product name: FRKOTE WOLO PART NO. 83634 MOLD RELEASE AGENT
Page 2 of 5

3. COMPOSITION / INFORMATION ON INGREDI ENTS

Hazardous Component(s) CAS Number Percentage*
Hydrocarbons, C7-C9, isoalkanes 1174921-67-5 60 – 80
Hydrocarbons, C10-C12, isoalkanes,
<2% aromatics 65072-03-9 30 - 60 * Exact percentages may vary or are trade secret. Concentration range is provided to assist users in providing appropriate protections. 4. FIRST AID MEASURES Inhalation: Move to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical attention. Skin contact: Remove contaminated clothing and footwear. Immediately flush skin with plenty of water (using soap, if available). If symptoms develop and persist, get medical attention. Wash clothing before reuse. Eye contact: Check for and remove any contact lenses. Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Get immediate medical attention. Ingestion: Keep individual calm. Do not induce vomiting: contains petroleum distillates and/or aromatic solvents. Never give anything by mouth to an unconscious person. If vomiting occurs, prevent aspiration by keeping the patient's head below the knees. Get immediate medical attention. Symptoms: See Section 11. Notes to physician: This material is an aspiration hazard. Potential danger from aspiration must be weighed against possible oral toxicity when deciding whether to induce vomiting. 5. FIRE FIGHTING MEASURES Extinguishing media: Water spray (fog), foam, dry chemical or carbon dioxide. Do not use high volume water jet. Special firefighting procedures: Wear self-contained breathing apparatus and full protective clothing, such as turn-out gear. Keep personnel upwind of fire. Unusual fire or explosion hazards: Vapors may form explosive mixtures with air. Do not handle or store near an open flame, heat or other sources of ignition. Hydrocarbon solvents are basically non-conductors of electricity and can become electrostatically charged during mixing, filtering or pumping at high flow rates. If this charge reaches a significantly high level, sparks can form that may ignite vapors of flammable liquids. Vapors may accumulate in low or confined areas, travel considerable distance to source of ignition, and flash back. In case of fire, keep containers cool with water spray. Hazardous combustion products: Oxides of carbon. Hydrocarbons. Acrid smoke and fumes. 6. ACCIDENTAL RELEASE MEASURES Use personal protection recommended in Section 8, isolate the hazard area and deny entry to unnecessary and unprotected personnel. Environmental precautions: Do not allow product to enter sewer or waterways. Advise authorities if product has entered or may enter sewers, water sources or extensive land areas. Prevent further leakage or spillage if safe to do so. This product is insoluble in water and will float on surface. Clean-up methods: Remove all sources of ignition. Ventilate area. Soak up with inert absorbent material (e.g. sand, silica gel, acid binder, universal binder, sawdust). Store in a closed metal container until ready for disposal. Keep upwind of the spilled material and isolate exposure. Refer to Section 8 "Exposure Controls / Personal Protection" prior to clean up. IDH number: 420481 Product name: FRKOTE WOLO PART NO. 83634 MOLD RELEASE AGENT Page 3 of 5 7. HANDLING AND STORAGE Handling: During use and until all vapors are gone: Keep area ventilated - do not smoke; extinguish all flames, pilot lights, and heaters; turn off stoves, electrical tools and appliances, and any other sources of ignition. Make sure containers are properly grounded before use or transfer of material. Prevent contact with eyes, skin and clothing. Do not breathe vapor and mist. Wash thoroughly after handling. Do not taste or swallow. For operations where eye or face contact could occur, provide safety shower and eyewash fountain. Storage: For safe storage, store between 5 C (41 F) and 25 C (77 F) Keep in a cool, well ventilated area away from heat, sparks and open flame. Keep container tightly closed until ready for use. 8. EXPOSURE CONTROL S / PERSONAL PROTECT ION Employers should complete an assessment of all workplaces to determine the need for, and selection of, proper exposure controls and protective equipment for each task performed. Hazardous Component(s) ACGIH TLV OSHA PEL AIHA WEEL OTHER Hydrocarbons, C7-C9, isoalkanes None None None None Hydrocarbons, C10-C12, isoalkanes, <2% aromatics None None None None Engineering controls: Use explosion-proof mechanical ventilation and local exhaust to control contaminants to within their occupational exposure limits during the use of this product. Respiratory protection: Use a NIOSH approved supplied air respirator with an organic cartridge if the potential to exceed established exposure limits exists. Eye/face protection: Safety goggles or safety glasses with side shields. Full face protection should be used if the potential for splashing or spraying of product exists. Safety showers and eye wash stations should be available. Skin protection: Use chemical resistant, impermeable clothing including gloves and either an apron or body suit to prevent skin contact. 9. PHYSICAL AND CHEMICAL PROPERTIES Physical state: Liquid Color: Colorless Odor: Mild, Solvent Odor threshold: Not available. pH: Not applicable Vapor pressure: 12 mbar Boiling point/range: > 112 C (> 233.6 F)
Melting point/ range: Not determined
Specific gravity: 0.725
Vapor density: Heavier than air.
Flash point: 6 C (42.8 F) Tagliabue closed cup
Flammable/Explosive limits – lower: Not available.
Flammable/Explosive limits – upper: Not available.
Autoignition temperature: Not available.
Flammability: Not applicable
Evaporation rate: Slower than ether.
Solubility in water: Slight
Partition coefficient (n-octanol/water): Not available.
VOC content: 99.39 %; 721 g/l
Viscosity: Not available.
Decomposition temperature: Not available.

IDH number: 420481 Product name: FRKOTE WOLO PART NO. 83634 MOLD RELEASE AGENT
Page 4 of 5

10. STABILITY AND REACTIVITY

Stability: Stable under normal conditions of storage and use.

Hazardous reactions: Will not occur.

Hazardous decomposition
products:
Oxides of carbon. Hydrocarbons. Acrid smoke and fumes.

Incompatible materials: Strong oxidizing agents. Humid air. Water.

Reactivity: Not available.

Conditions to avoid: Avoid static discharge. Vapors may form explosive mixtures with air. Spray mist may be
flammable at temperatures below the flash point. Keep away from open flames, hot surfaces
and sources of ignition. Fire or intense heat may cause violent rupture of packages.

11. TOXICOLOGICAL INFORMATION

Relevant routes of exposure: Skin, Inhalation, Eyes, Ingestion

Potential Health Effects/Symptoms

Inhalation: Vapors and mists will irritate nose and throat and possibly eyes. High vapor concentrations
(greater than approximately 1000 ppm) may cause headaches, dizziness, anesthesia,
drowsiness, unconsciousness, and other central nervous system effects, including death.
Skin contact: Causes skin irritation. May cause allergic skin reaction. Solvent action can dry and defat the
skin, causing the skin to crack, leading to dermatitis.
Eye contact: May cause irritation.
Ingestion: This product may be fatal if it is swallowed. Principal hazard of ingestion is aspiration into the
lungs and subsequent pneumonitis. Central nervous system depression, including dizziness,
drowsiness, fatigue, nausea, headache, unconsciousness.

Hazardous Component(s) LD50s and LC50s Immediate and Delayed Health Effects
Hydrocarbons, C7-C9, isoalkanes None No Data
Hydrocarbons, C10-C12, isoalkanes,
<2% aromatics None No Data Hazardous Component(s) NTP Carcinogen IARC Carcinogen OSHA Carcinogen (Specifically Regulated) Hydrocarbons, C7-C9, isoalkanes No No No Hydrocarbons, C10-C12, isoalkanes, <2% aromatics No No No 12. ECOLOGICAL INFORMATION Ecological information: Not available. 13. DISPOSAL CONSIDERATIONS Information provided is for unused product only. Recommended method of disposal: Follow all local, state, federal and provincial regulations for disposal. 14. TRANSPORT INFORMATION The transport information provided in this section only applies to the material/formulation itself, and is not specific to any package/configuration. U.S. Department of Transportation Ground (49 CFR) Proper shipping name: Resin solution Hazard class or division: 3 Identification number: UN 1866 Packing group: II IDH number: 420481 Product name: FRKOTE WOLO PART NO. 83634 MOLD RELEASE AGENT Page 5 of 5 International Air Transportation (ICAO/IATA) Proper shipping name: Resin solution Hazard class or division: 3 Identification number: UN 1866 Packing group: II Water Transportation (IMO/IMDG) Proper shipping name: RESIN SOLUTION (Isoalkane C7 - C10) Hazard class or division: 3 Identification number: UN 1866 Packing group: II Marine pollutant: Isoalkane C7 - C10 15. REGULATORY INFORMATI ON United States Regulatory Information TSCA 8 (b) Inventory Status: All components are listed as active or are exempt from listing on the Toxic Substances Control Act (TSCA) inventory. TSCA 12 (b) Export Notification: None above reporting de minimis CERCLA/SARA Section 302 EHS: None above reporting de minimis. CERCLA/SARA Section 311/312: Fire, Immediate Health, Delayed Health CERCLA/SARA Section 313: None above reporting de minimis. California Proposition 65: This product contains a chemical known to the State of California to cause birth defects or other reproductive harm. Canada Regulatory Information CEPA DSL/NDSL Status: One or more components are not listed on, and are not exempt from listing on either the Domestic Substances List or the Non-Domestic Substances List. 16. OTHER INFORMATION This safety data sheet contains changes from the previous version in sections: 2, 3, 8, 11, 13, 15 Prepared by: Product Safety and Regulatory Affairs Issue date: 10/14/2020 DISCLAIMER: The data contained herein are furnished for information only and are believed to be reliable. However, Henkel Corporation and its affiliates ( Henkel ) does not assume responsibility for any results obtained by persons over whose methods Henkel has no control. It is the user s responsibility to determine the suitability of Henkel s products or any production methods mentioned herein for a particular purpose, and to adopt such precautions as may be advisable for the protection of property and persons against any hazards that may be involved in the handling and use of any Henkel s products. In light of the foregoing, Henkel specifically disclaims all warranties, express or implied, including warranties of merchantability and fitness for a particular purpose, arising from sale or use of Henkel s products. Henkel further disclaims any liability for consequential or incidental damages of any kind, including lost profits. This Safety Data Sheet has been generated based on OSHA Hazard Communication Standard (29 CFR 1910.1200) and provides information in accordance with U.S. federal law only. No warranty or representation of any kind is given with respect to the substantive or export laws of any other jurisdiction or country. Please confirm that the information provided herein conforms to the substantive export or other law of any other jurisdiction prior to export. Please contact Henkel Product Safety and Regulatory Affairs for additional assistance.

37WAX18720P_SDS.pdf

by | Sep 27, 2025

37WAX187_SDS.pdf

by | Sep 27, 2025