WAXES | Revchem Composites

37WA147_SDS.pdf

by | Sep 27, 2025

MATERIAL SAFETY DATA SHEET
FORMULA FIVE

MOLD RELEASE WAX
MSDS Number: F5MRW-001 Effective Date: 20 May 2014 Page 1 of 5

SECTION
1: CHEMICAL PRODUCT AND COMPANY IDENTIFICATION

PRODUCT NAME FORMULA FIVE

Mold Release Wax
GENERIC NAME Wax polishing compound

MANUFACTURER REXCO
P.O. Box 80996
Conyers, Georgia 30013
USA

TRANSPORTATION EMERGENCY :
CHEMTREC (800) 424-9300 U.S.A. (24 hours/day)
CHEMTREC (703) 527-3887 International (Collect calls accepted)

CUSTOMER SERVICE AND PRODUCT EMERGENCY :

REXCO (800) 888-1060 U.S.A and Canada
REXCO (770) 483-7610 International

SECTION 2: COMPOSITION / INFORMATION ON INGREDIENTS

COMPONENT CAS NUMBER CONCENTRATION (%)
Light Petroleum Distillate 64742-47-8 64 76
Carnauba Wax 8015-86-9 12 18
Paraffin Wax 8002-74-2 8 12
Dimethylpolysiloxane 63148-62-9 4 6

SECTION 3: HAZARDS IDENTIFICATION

NFPA RATING: Health 1, Fire 2, Reactivity 0
HMIS RATING: Health 1, Fire 2, Reactivity 0
0=
MINIMAL, 1=SLIGHT, 2=MODERATE, 3=HIGH, 4=EXTREME

POTENTIAL HEALTH EFFECTS

EYES Can cause eye irritation. Prolonged or repeated exposure may result in conjunctiva.
SKIN May cause skin irritation. Prolonged or repeated exposure may result in defatting, skin
dermatitis.
INHALATON Repeated or prolonged exposure may cause central nervous system depression, including
headache, dizziness, loss of coordination, unconsciousness.
INGESTION Can cause nausea and vomiting with danger of Chemical Pneumonia.

CHRONIC HEALTH EFFECTS : Possible central nervous system depression and skin dermatitis.

MATERIAL SAFETY DATA SHEET
FORMULA FIVE

MOLD RELEASE WAX
MSDS Number: F5MRW-001 Effective Date: 20 May 2014 Page 2 of 5
SYMPTOMS OF EXPOSURE : Symptoms of exposure through inhalation, ingestion, or direct contact with skin
may include nausea, vomiting, diarrhea, irritation of nose, throat, airways, or skin, central nervous system
depression possibly including headache, loss of coordination, drowsiness, fatigue, and unconsciousness
and death in extreme cases. Pre-existing eye, skin, or respiratory disorders may be aggravated by exposure
to this product.
PRIMARY ROUTES OF ENTRY : Skin contact, skin absorption, eye contact, and inhalation

CANCER INFORMATION : Neither this product nor any of its components is listed as a carcinogen or partial
carcinogen by the following agencies: the National Toxicology Program, the International Agency for
Research on Cancer, and the Occupational Safety and Health Administration.

SECTION 4: FIRST AID MEASURES

EYES Flush immediately with cold water for 15 minutes and seek medical attention.
SKIN Remove contaminated clothing and wash affected area with soap and hot water. If irritation
from contact persists, seek medical attention. Launder contaminated clothing including
shoes prior to reuse.
INHALATON If light-headed or having difficulty breathing, expose individual to fresh air and/or oxygen. If
breathing stops, begin artificial respiration and seek immediate medical attention.
INGESTION Seek immediate medical attention. DO NOT INDUCE VOMITING. If vomiting occurs
spontaneously, keep victim s head below hips to prevent aspiration into lungs. If possible, do
not leave victim unattended.

SECTION 5: FIRE FIGHTING MEASURES

FLASH POINT / METHOD: >142 F (>61 C) / Tagliabue Closed Cup method (TCC)

AUTO IGNITION TEMPERATURE : 440 F (226 C)

FLAMMABLE LIMITS IN AIR (% BY VOLUME): LEL Lower 0.9% / UEL Upper 6.0%

FIRE AND EXPLOSION HAZARDS : Low flash point. Keep work areas free of hot metal surfaces and other
sources of ignition.

EXTINGUISHING MEDIA: Use dry chemicals, CO2, water fog, water spray, or foam.

FIRE FIGHTING INSTRUCTIONS: Wear a NIOSH-approved self contained breathing apparatus in positive
pressure mode and full bunker gear. Water may be unsuitable as an extinguishing media but helpful in
keeping adjacent containers cool in order to prevent container rupture. Avoid spreading burning liquid with
water used for cooling purposes.

SECTION 6: ACCIDENTAL RELEASE MEASURES

IN CASE OF SPILL: Keep sources of ignition and hot metal surfaces isolated from spill. Persons involved in
clean-up should wear personal protection equipment. Stop spill at source and prevent from spreading. If
spilled as a solid, scrape and then sweep up spilled material. If spilled as a free-flowing liquid, confine spill

MATERIAL SAFETY DATA SHEET
FORMULA FIVE

MOLD RELEASE WAX
MSDS Number: F5MRW-001 Effective Date: 20 May 2014 Page 3 of 5
and allow liquid to solidify prior to clean-up. If run-off occurs, notify proper authorities as required. Place in
chemical waste container and dispose of in accordance with local, state, and federal regulations.

CAUTION! FLOORS COVERED WITH RESIDUAL MATE RIAL BECOME EXTREMELY SLIPPERY .

SECTION 7: HANDLING AND STORAGE

Store in a cool, dry location at 90 F (32 C) or below and away from open flames, heat, and sparks. Keep
work areas free of hot metal surfaces and other sources of ignition. Keep container tightly closed when not in
use to prevent drying out of material.

Repack only into high-density polyethylene (HDPE). Containers used for repackaging should be thoroughly
tested for long-term product compatibility before use. All new containers must exhibit product labels required
for proper identification, safety, handling, and storage. Empty containers may contain product residue such as
vapors continue to observe proper handling and storage precautions.

SECTION 8: EXPOSURE CONTROLS / PERSONAL PROTECTION

EYE PROTECTION: Safety glasses, goggles, or face shield are advised. Eye washes are recommended for
work areas.

SKIN PROTECTON: Wear impervious gloves, clothing, and shoes to prevent skin contact. Safety showers are
recommended for work areas. Remove contaminated clothing and wash in hot water and soap prior to reuse.

RESPIRATORY PROTECTION : Exposure levels should be kept below the PEL or TLV for this product.
If exposure exceeds recommended levels, use of NIOSH-approved cartridge respirator or gas mask is
advised. Engineering controls should be implemented if necessary to reduce exposure.

ENGINEERING CONTROLS : Provide sufficient general and/or local exhaust (explosion-proof ventilation) to
keep exposure below PEL or TLV.

EXPOSURE GUIDELINES
COMPONENT OSHA PEL ACGIH TLV
Light Petroleum Distillate 100 ppm PEL/TWA 100 ppm TLV/TWA
Carnauba Wax None Established None Established
Paraffin Wax None Established None Established
Dimethylpolysiloxane None Established None Established

Threshold limit for wax fumes is 2 mg/m
3
in air for 8-hour workday. Avoid generation and inhalation of wax
fumes.

PEL = PERMISSIBLE EXPOSURE LIMITS TLV = THRESHOLD LIMIT VALUE TWA = TIME WEIGHTED AVERAGE (8 HOURS)

MATERIAL SAFETY DATA SHEET
FORMULA FIVE

MOLD RELEASE WAX
MSDS Number: F5MRW-001 Effective Date: 20 May 2014 Page 4 of 5

SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES

APPEARANCE: Tan Paste Wax SPECIFIC GRAVITY (H2O=1): 0.788
ODOR: Solvent VAPOR PRESSURE (mm Hg): 3.0
BOILING POINT: 310 – 410 F (154 – 210 C) VAPOR DENSITY (AIR=1): 1.4
MELTING POINT: 120 F (48 C) SOLUBILITY IN WATER: No
V.O.C. (BY % CALCUATION): 533 g/L REACTIVITY IN WATER: No

V.O.C. = VOLATILE ORGANIC CONTENT

SECTION 10: STABILITY AND REACTIVITY

STABILITY: Stable

CONDITIONS TO AVOID: Open flames, hot surfaces, or any ignition source.

INCOMPATIBILITY: Incompatible with strong oxidizing agents, strong acids or bases, alkali metals, halogens,
and strong alkalis.

HAZARDOUS DECOMPOSITION : Normal combustion forms carbon dioxide and water vapor. Incomplete
combustion will produce carbon monoxide and other toxic substances.

HAZARDOUS POLYMERIZATION : Will not occur

SECTION 11: TOXICOLOGICAL INFORMATION

No data available specific to this product. Following is data as pertains to one or more major ingredients:

EYES: Primary Eye Irritation Index (Rabbits): Maximum average score = 3.3 (Maximum score is 110)

SKIN: Primary Skin Irritation Index (Rabbits): 2.2 (Maximum score is 8.0)
Acute Dermal LD50 (Rabbit): 2.0 4.0 g/kg for similar products

INHALATION: LC50 (Rat): (male and female) > 6.8 mg/L

INGESTION: Acute Oral LD50 (Rat): > 5 g/kg

SECTION 12: ECOLOGICAL INFORMATION

Product would not be expected to cause damage to the environment and is inherently biodegradable. Product
would be expected to biodegrade slowly, depending upon conditions to which it is exposed.

SECTION 13: DISPOSAL CONSIDERATIONS

Waste material may be incinerated at an approved facility where permitted under appropriate Federal, State,
and Local regulations.

MATERIAL SAFETY DATA SHEET
FORMULA FIVE

MOLD RELEASE WAX
MSDS Number: F5MRW-001 Effective Date: 20 May 2014 Page 5 of 5

SECTION 14: TRANSPORT INFORMATION

DOT CLASSIFICATION: This product is not regulated for transportation.

ICAO / IATA CLASSIFICATION: This product is not regulated for transportation.

IMDG CLASSIFICATION: This product is not regulated for transportation.

SECTION 15: REGULATORY INFORMATION

COMPREHENSIVE ENVIRONMENTAL RESPONSE COMPENSATION AND LIABILITY ACT OF 1980 (CERCLA)
Contains no chemicals on the CERCLA hazardous chemicals list.

SUPERFUND AMENDMENTS AND REAUTHORIZATION ACT OF 1986 (SARA) TITLE III

SARA 302: Contains no chemicals subject to SARA 302 reporting

SARA 311/312 HAZARD CATEGORIES: Not hazardous

SARA 313: Contains no chemicals subject to SARA 313 reporting

OCCUPATIONAL HEALTH AND SAFETY ADMINISTRATION (OSHA) CLASSIFICATION: Not applicable

CALIFORNIA PROPOSITION 65: Contains no detectable quantities of Proposition 65 chemicals.

WORKPLACE HAZARDOUS MATERIAL INFORMATION SYSTEM (WHMIS) CLASSIFICATION: Not regulated

CHEMICAL INVENTORY: This product is not listed on regulatory inventories or listings. Components are either
listed on the following chemical inventories or qualify for an exemption:

UNITED STATES Toxic Substances Control Act (TSCA)
CANADA Canadian Domestic Substance List (DSL)
EUROPE European Inventory of Existing Commer cial Chemical Substances (EINECS)
AUSTRALIA Australian Inventory of Chemical Substances (AICS)
JAPAN Existing and New Chemical Substances (ENCS)
KOREA Existing Chemicals List (ECL)
PHILIPPINES Philippines Inventory of Chemicals and Chemical Substances (PICCS)

SECTION 16: OTHER INFORMATION

All information provided in this Material Safety Data Sheet is believed to be accurate and reliable. REXCO
makes no warranty of any kind, express or implied, including warranties of merchantability or fitness for a
particular purpose, concerning the safe use of this material in your process or in combination with other
substances. Users should make their own tests and assessments as to the suitability of this product or the
information contained herein for their particular purposes and uses. .

Prepared by: REXCO Product Stewardship Department

37WA143_SDS.pdf

by | Sep 27, 2025

Safety Data Sheet PARTALL Film #10
PARTALL Film #10
Safety Data Sheet Version: 5.4
according to OSHA HCS and GHS Canada WHMIS 2015 Revision date: 2023 11 09
Print date: 2023 11 10
SECTION 1. IDENTIFICATION OF THE SUBSTANCE/MIXTURE AND OF THE COMPANY/UNDERTAKING
1.1 Product Identifier
Product form : Mixture
Trade name : PARTALL Film #10
1.2 Relevant identified uses of the substance or mixture and uses advised against
Relevant identified uses : Industrial; release agent
Uses advised against : Do not use for purposes other than those listed
1.3 Details of the supplier of the safety data sheet
Supplier : REXCO
P.O. Box 80996
Conyers, GA 30013
U.S.A.
Telephone : 1 770 483 7610
Fax : 1 770 483 8550
Email : info@rexco usa.com
Website : www.rexco usa.com
1.4 Emergency telephone number
Chemtrec (24 hours/day) : 1 800 434 9300 (USA and Canada)
: 1 703 527 3887 (international; collect calls accepted)
SECTION 2. Hazards Identification
2.1 Classification of the substance or mixture
Classification according to OSHA HCS and GHS Canada WHMIS 2015
Flam. Liq. 3 H226 Flamma ble liquid and vapour
Acute Tox. 4 H302 Harmful if swallowed
Skin Irrit. 2 H315 Causes skin irritation
Eye Irrit. 2 H319 Causes serious eye irritation
STOT SE 3 H335 May cause respiratory irritation
STOT SE 3 H336 May cause drowsiness or dizziness
See section 16 for full text of H phrases.
2.2 Label elements
Labeling according to the Globally Harmonized System (GHS)
Pictograms
Signal word :Danger
Hazard statements
H226 Flammable liquid and vapour
H302 Harmful if swallowed
1/10Revision date: 11/9/2023 Version: 5.4

Safety Data Sheet PARTALL Film #10
H315 Causes skin irritation
H319 Causes serious eye irritation
H335 May cause respiratory irritation
H336 May cause drowsiness or dizziness
Precautionary statements
P101 If medical advice is needed, have product container or label at hand.
P102 Keep out of reach of children.
P103 Read label before use.
P210
P233 Keep container tightly closed.
P240 Ground and bond containe r and receiving equipment.
P241 Use explosion proof electrica l/ventilating/lighting equipment.
P242 Use non sparking tools.
P243 Take action to preve nt static discharges.
P261 Avoid breathing dust/fume/gas/mist/vapours/spray.
P264 Wash thoroughly after handling.
P270 Do not eat, drink or smoke when using this product.
P271 Use only outdoors or i n a well ventilated area.
P280 Wear protective gloves/protective clothing/eye protection/f ace protection.
P301 + P312 IF SWALLOWED: Call a POISON CENTER/doctor if you fee l unwell.
P302 + P352 IF ON SKIN: Wash with plenty of water.
P303 + P361 + P353
P304 + P340
P305 + P351 + P338
P310 Immediately call a POISON CENTER/doctor.
P312 Call a POISON CENTER/do ctor if you feel unwell.
P321 Specific treatment (see on this label).
P330 Rinse mouth.
P332 + P313 If skin irritation occurs: Get medical advice/attention.
P337 + P313 If eye irritation persists: Get medical advice/attention.
P362 + P364 Take off contaminated clothing and wash it before re use.
P370 + P378 In case of fire: See Section 5.2 for extinguishing media.
P403 + P233 Store in a well ventilated place. Keep container tightly closed.
P403 + P235 Store in a well ventilated place. Keep cool.
P501 Dispose of contents/container in accordance with local/regi onal/national/international regulations.
2.3 Other hazards
Material does not meet the criteria for PBT or vPvB in accordance with REACH Annex XIII.
SECTION 3. Composition/information on ingredients
3.1 Substances
Not applicable. This material is not defined as a substance.
3.2 Mixtures
This material is defined as a mixture.
Components contributing to the classification of this material %
Ethanol 20 25
CAS No. 64 17 5
Flam. Liq. 2, H225
Eye Irrit. 2, H319
STOT SE 3, H335
STOT SE 3, H336
Isopropyl alcohol 2 6
CAS No. 67 63 0
IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue
rinsing.
Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water [or shower].
IF INHALED: Remove person to fresh air and keep comfortable for breathing.
2/10Revision date: 11/9/2023 Version: 5.4

Safety Data Sheet PARTALL Film #10
Flam. Liq. 2, H225
Eye Irrit. 2, H319
STOT SE 3, H336
n Butanol 1 3
CAS No. 71 36 3
Flam. Liq. 3, H226
Acute Tox. 4 , H302
Skin Irrit. 2, H315
Eye Dam. 1, H318
STOT SE 3, H335
STOT SE 3, H336
SECTION 4. First aid measures
General information
4.1 Description of first aid measures
Inhalation
Skin
Eyes
Ingestion
4.2 Most important symptoms and effects, both acute and delayed
4.3 Indication of any immediate medical attention and special treatment
Treat symptomatically. Seek immediate medical attention if ingested.
SECTION 5. Firefighting measures
5.1 Extinguishing media
Suitable extinguishing media
Unsuitable extinguishing media
5.2 Special hazards arising from the substance or mixture
None inherent to this product.
Do not use high volume water jet. Avoid spreading burning liquid with water used for cooling purposes.
Components not listed are either non hazardous or are below reportable limits. Concentrations are in percent by weight.
Do not leave victim unattended. Show this safety data sheet to doctor in attendance.
Provide fresh air if light headed or having difficulty breathing. Provide artificial respiration if needed. If difficulty breathing persists, seek medical attention.
If unconscious, place victim on their side for transport to medical facility.
Remove contaminated clothing and wash affected area with soap and warm water. If irritation persists, seek medical attention. Launder contaminated
clothing and shoes prior to reuse.
Flush immediately with cold water for 15 minutes. Remove contact lenses. Keep eye wide open while rinsing. Get prompt medical attention.
Seek immediate medical attention. Do not induce vomiting. If spontaneous vomiting occurs keep victim s head below hips to prevent aspiration into lungs.
Do not leave individual unattended.
Can cause eye irritation. May cause skin irritation. If swallowed, may cause nausea, vomiting, gastrointestinal bleeding, abdominal pain, and central nervous
system depression with symptoms such as drunkeness, unconsciousness, narcosis, coma, respiratory failure, and death. Prolonged or repeated exposure
may result in conjunctiva, skin dermatitis, irritation of mucous membranes, liver damage, and central nervous system depression, including headache,
dizziness, loss of coordination, and unconsciousness.
Standard procedure for chemical fires. Use dry chemicals, carbon dioxide, water fog, water spray, or alcohol resistant foam. Use extinguishing measures
that are appropriate to local circumstances and the surrounding environment.
3/10Revision date: 11/9/2023 Version: 5.4

Safety Data Sheet PARTALL Film #10
Hazardous decomposition products formed during combusion
Carbon oxides, aldehydes, acids
5.3 Advice for firefighters
SECTION 6. Accidental release measures
6.1 Personal precautions, protective equipment and emergency procedures
6.2 Environmental precautions
6.3 Methods and material for containment and cleaning up
6.4 Reference to other sections
SECTION 7. Handling and storage
See section 1.2
SECTION 8. Exposure controls/personal protection
Ingredients with limit values that require monitoring:
Ethanol
CAS No. 64 17 5
ppm mg/m
3
ppm mg/m
3
Australia 1000 1880
Austria 1000 1900 2000 3800
Belgium 1000 1907
Canada Ontario 1000
Canada Qu bec 1000 1880
LTEL 8 hours STEL 15 minutes
8.1 Control parameters
Evacuate area. Firefighters should use standard protective equipment and should use self contained breathing apparatus in enclosed spaces. Use water
spray to cool surfaces exposed to fire and to protect personnel.
Use personal protective equipment. Ensure adequate ventilation. Keep sources of ignition and hot metal surfaces isolated from spill.
Prevent product from entering drains, waterways, sewers, and soil. Stop spill at source and prevent further leakage or spillage if safe to do so. Notify proper
authorities if product enters sewers or public waters.
Flush spilled material into suitable retaining areas or containers. Small amounts of spilled material may be absorbed with standard absorbent such as sand,
vermiculite, or diatomaceous earth. Confine spill and place into suitable closed container for disposal. Dispose of in accordance with regional, national, and
local laws and regulations.
Section 7: safe handling. Section 8: personal and protective equipment. Section 10: incompatible materials. Section 13: disposal information. Section 16: full
text of abbreviations.
7.1 Precautions for safe handling
Use in a well ventilated area or use appropriate respirator when ventilation is inadequate. Do not breathe vapor. Wear personal protective clothing and
equipment as indicated in Section 8. Eliminate all sources of ignition. Use explosion proof equipment. Do not ingest. Use good industrial hygiene practices in
handling this material. Do not smoke, eat or drink while using this product. Wash hands and other exposed areas with mild soap and water before eating,
drinking or smoking and leaving work. Clean up spills as soon as they occur. Empty containers may contain residual amounts of this product and should be
handled with care. Do not reuse containers.
7.2 Conditions for safe storage, including any incompatibilities
Store in accordance with local regulations. Store in a dry, cool and well ventilated area away from direct sunlight. Avoid freezing. Store away from
incompatible materials (see Section 10) and food and drink. Store in original container. Keep container tightly closed when not in use. Containers that have
been opened must be carefully resealed and kept upright to prevent leakage. Do not store in unlabeled containers. Provide appropriate fire extinguishers
and spill cleanup equipment in or near storage area. Keep unauthorized personnel away.
7.3 Specific end uses
4/10Revision date: 11/9/2023 Version: 5.4

Safety Data Sheet PARTALL Film #10
Denmark 1000 1900 2000 3800
Finland 1000 1900 1300 2500
France 1000 1900 5000 9500
Germany (AGS) 500 960 1000 1920
Germany (DFG) 200 380 800 1520
Hungary 1900 7600
Ireland 1000
Latvia 1000
New Zealand 1000 1880
Poland 1900
Romania 1000 1900 5000 9500
Singapore 1000 1880
South Korea 1000 1900
Spain 1000 1910
Sweden 500 1000 1000 1900
Switzerland 500 960 1000 1920
The Netherlands 260 1900
USA (NIOSH) 1000 1900
USA (OSHA) 1000 1900
United Kingdom 1000 1920
Isopropyl alcohol
CAS No. 67 63 0
ppm mg/m
3
ppm mg/m
3
Australia 400 983 500 1230
Austria 200 500 800 2000
Belgium 200 500 400 1000
Canada Ontario 200 400
Canada Qu bec 400 983 500 1230
Denmark 200 490 400 980
Finland 200 500 250 620
France 400 980
Germany (AGS) 200 500 400 1000
Germany (DFG) 200 500 400 1000
Hungary 500 2000
Ireland 200 400
Japan 400
Japan (JSOH) 400 980
Latvia 350 600
New Zealand 400 983 500 1230
People’s Republic of China 350 700
Poland 900 1200
Romania 70 600 93 800
Singapore 400 983 500 1230
South Korea 200 480 400 980
Spain 200 500 400 1000
Sweden 150 350 250 600
Switzerland 200 500 400 1000
USA (NIOSH) 400 980 500 1225
USA (OSHA) 400 980
United Kingdom 400 999 500 1250
n Butanol
CAS No. 71 36 3
ppm mg/m
3
ppm mg/m
3
Australia 50 152
Austria 50 150 200 600
LTEL 8 hours STEL 15 minutes
LTEL 8 hours STEL 15 minutes
5/10Revision date: 11/9/2023 Version: 5.4

Safety Data Sheet PARTALL Film #10
Belgium 20 62
Canada Ontario 20
Canada Qu bec 50 152
Denmark 50 150 50 150
Finland 50 150 75 230
France 50 150
Germany (AGS) 100 310 100 310
Germany (DFG) 100 310 100 310
Hungary 45 90
Ireland 20
Japan 25
Japan (JSOH) 50 150
Latvia 10
New Zealand 50 150
People’s Republic of China 100
Poland 50 150
Romania 33 100 66 200
Singapore 50 152
South Korea 20 60
Spain 206150 154
Sweden 15 45 30 90
Switzerland 100 310 100 310
USA (NIOSH) 50 150
USA (OSHA) 100 300
United Kingdom 50 154
Ingredients with biological monitoring guidance values (BMGV) and/or biological exposure index (BEI):
Isopropyl alcohol
CAS No. 67 63 0
BMGV: 40 mg acetone/L urine (end of shift at end of workweek)
Wear chemical resistant clothing and shoes. Safety showers are recommended for the work area.
Wear chemical resistant impervious gloves: Viton, Nitrile. Glove suitability and breakthrough time will differ depending on the specific use conditions.
Contact the glove manufacturer for specific advice on glove selection and breakthrough times for your use conditions. Inspect and replace worn or damaged
gloves.
Environmental controls
Hand protection
8.2 Exposure controls
Engineering controls
Provide adequate local exhaust ventilation. Use explosion proof electrical/ventilating/lighting equipment. Maintain eye wash fountain and safety shower in
work area.
Personal protective equipment
General protective and hygenic measures
Do not eat, drink, or smoke while using. Wash hands before breaks and at the end of workday. Immediately remove all soiled or contaminated clothing.
Eye and face protection
Chemical safety glasses with side shields, goggles or face shield are recommended. Eye wash stations are recommended for the work area.
Skin and body protection
Respiratory protection
Provide sufficient general and/or local exhaust. If engineering controls are not sufficient to protect worker health use a half face filter respirator suitable for
organic vapor approved under applicable regulatory standards.
6/10Revision date: 11/9/2023 Version: 5.4

Safety Data Sheet PARTALL Film #10
SECTION 9. Physical and chemical properties
Physical state :Liquid
Colour :Green or Clear
Odour :Alcohol
Melting point :Not applicable
Freezing point :No data available
Initial boiling point and boiling range :70 C 104 C (158 F 220 F)
Flammability :Flammable liquid
Upper flammability limit :0.187
Lower flammability limit :0.033
Flash point :24 C (76 F)
Auto ignition temperature :354 C (670 F)
Decomposition temperature :No data available
pH :5.0 6.9
Viscosity :25 70 cP
Solubility (water) :Fully soluble
Partition coefficient n octanol/water (log value) :No data available
Vapour pressure :No data available
Relative density at 24 C (water = 1) :0.94 0.98
Volatile organic compounds (VOC)
VOC actual :289 g/L
VOC less water & exempt solvents :730 g/L
SECTION 10. Stability and reactivity
Not reactive under normal conditions of use.
Stable under normal conditions of use.
No dangerous reactions known under normal conditions of use.
Avoid heat, sparks, open flames, hot surfaces, or other sources of ignition.
SECTION 11. Toxicological Information
Acute toxicity : Not classified
LD/LC50 values that are relevant for classification:
Ethanol
CAS No. 64 17 5
LD50 rat 10740 mg/kgOral
Prevent product from entering drains. Stop spill at source and prevent further leakage or spillage if safe to do so. If product contaminates rivers and lakes or
drains, notify proper authorities.
10.1 Reactivity
10.2 Chemical stability
10.3 Possibility of hazardous reactions
10.4 Conditions to avoid
10.5 Incompatible materials
Strong oxidizing agents, acids, alkali materials
10.6 Hazardous decomposition products
Carbon oxides, aldehydes, acids
11.1 Information on hazard classes
7/10Revision date: 11/9/2023 Version: 5.4

Safety Data Sheet PARTALL Film #10
LD50 rabbit > 16000 mg/kg
Isopropyl alcohol
CAS No. 67 63 0
LD50 rat 5045 mg/kg
LD50 rabbit 12870 mg/kg
LC50 rat 73 mg/l/4h
n Butanol
CAS No. 71 36 3
LD50 rat 790 mg/kg
LD50 rabbit 3400 mg/kg
LC50 rat 24 mg/l/4h
LC50 rat 8000 ppm/4h
Skin corrosion/irritation : Expec ted to be slightly irritating
Serious eye damage/irritation : Causes serious eye damage
Respiratory or skin sensitisation : Not classified
Germ cell mutagenicity : Not classified
Carcinogenicity : Not classified
Reproductive toxicity : Not classified
STOT single exposure : Not classified
STOT repeated exposure : Not classified
Aspiration hazard :
11.2 Information on other hazards
No data available
SECTION 12: Ecological information
12.1 Toxicity : Not expected to be toxic.
12.2 Persistence and degradability : Expected to be inherently biodegradable.
12.3 Bioaccumulative potential : No data available
12.4 Mobility in soil : No data available
12.5 Results of PBT and vPvB assessment :
12.6 Endocrine disrupting properties : No data available
12.7 Other adverse effects : No data available
SECTION 13. Disposal considerations
13.1 Waste treatment methods
Dispose of in accordance with regional, national, and local laws and regulations.
Material disposal :
Container disposal :
SECTION 14. Transport information
14.1 UN number
UN1987
14.2 UN proper shipping name
DOT : ALCOHOLS, N.O.S.
ADR : ALCOHOLS, N.O.S.
Do not dispose of waste into sewer. Do not contaminate ponds, waterways, or ditches with product or used
container. Send to a licensed waste management company.
Do not dispose of waste into sewer. Do not contaminate ponds, waterways, or ditches with product or used
container. Send to a licensed waste management company.
Dermal
Oral
Dermal
Not classified
This mixture does not contain any substances that are assessed to be a PBT or a vPvB.
Inhalative
Oral
Dermal
Inhalative
Inhalative
8/10Revision date: 11/9/2023 Version: 5.4

Safety Data Sheet PARTALL Film #10
IMDG : ALCOHOLS, N.O.S. (eth anol, isopropyl alcohol)
IATA : ALCOHOLS, N.O.S. (eth anol, isopropyl alcohol)
14.3 Transport hazard class
3
14.4 Packing group
III
14.5 Environmental hazards
No
14.6 Special precautions for user
EmS: F E, S D
Stowage category: A
Kemler code: 30
14.7 Transport in bulk according to IMO instruments
Transport in bulk is not foreseen.
14.8 Additional information
Limited Quantity: 5 L
Limited Quantity: 5 L
Tunnel code: D/E
SECTION 15. Regulatory information
15.1 Safety, health and environmental regulations/legislation specific for the substance or mixture
No information available for this material. Information provided is for components.
OSHA Hazard Communication Standard
This material is hazardous in accordance with OSHA HazCom 2012, 29 CFR 1910.1200
Superfund Amendments and Reauthorization Act (SARA)
SARA 302 Components
No chemicals in this material are subject to the reporting requirements of SARA Title III, Section 302.
SARA 311/312 Hazard Categories
Fire hazard, immediate (acute) health hazard, delayed (chronic) health hazard
SARA 313 Components
Isopropyl Alcohol (CAS No. 67 63 0); n Butanol (CAS No. 71 36 3)
Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA)
California Proposition 65
This product contains the following Right to Know components:
Component U.S. State Right to Know list
Ethanol (CAS No. 64 17 5) : Massac husetts, New Jersey, Pennsylvania
Isopropyl Alcohol (CAS No. 67 63 0) : Massachusetts, New Jersey, Pennsylvania
n Butanol (CAS No. 71 36 3) : Massa chusetts, New Jersey, Pennsylvania
International Agency for Research on Cancer (IARC)
This product contains the following chemicals classified by IARC as carcinogenic:
Isopropyl alcohol
n Butanol (CAS No. 71 36 3); Reportable Quantity (RQ) = 5000 pounds
No chemicals in this material are subject to the reporting requirements of California Proposition 65.
9/10Revision date: 11/9/2023 Version: 5.4

Safety Data Sheet PARTALL Film #10
CAS No. 67 63 0
Group 3
Chemical inventories
Components are listed or exempted from listing on the following chemical inventories:
AICS Australian Inventory of Chemical Substances
DSL / NDSL Domestic Substances List / Non Domestic Substances List
EINECS European Inventory of Exis ting Commercial Chemical Substances
ENCS Existing and New Chemical Substances
IECS Inventory of Existing Chemic al Substances Produced or Imported in China
KECI Korea Existing Chemicals Inventory
NZIoC New Zealand Inventory of Chemicals
PICCS Philippine Inventory of Chem icals and Chemical Substances
TCSI Taiwan Chemical Substance Inventory
TSCA Toxic Substances Control Act
15.2 Chemical safety assessment
A chemical safety assessment has not been carried out for this product.
SECTION 16. Other information
Abbreviations and acronyms
Acute Tox. 4 Acute toxicity Category 4
ADR European Agreement concerning the International Carriage of Dangerous Goods by Road
AGS Committee on Hazardous Substances
CAS Chemical Abstract Service
DFG German Research Foundation
DOT U.S. Department of Transportation
EmS Emergency Response Procedures for Ships Carrying Dangerous Goods
Eye Dam. 1 Eye damage Category 1
Eye Irrit. 2 Serious eye dama ge/irritation Category 2
Flam. Liq. 3 Flammable liquids Category 3
IATA International Air Transport Association
IMDG International Maritime Dangerous Goods
JSOH Japanese Society for Oral Health
LC50 Lethal concentration, 50 percent
LD50 Lethal dose, 50 percent
LTEL Long term exposure limit
NIOSH National Institute for O ccupational Safety and Health
OSHA U.S. Occupational Safety and Health Administration
OSHA HCS U.S. Occupational Safety and Health Administration Hazard Communication Standard
PBT: Persistent, Bioaccumalative and Toxic
Skin Irrit. 2 Skin corrosion/irritation Category 2
STEL Short term exposure limit
STOT SE 3 Specific target organ t oxicity (single exposure) Category 3
vPvB: very Persistent and very Bioaccumulative
DISCLAIMER: The information in this Safety Data Sheet (SDS) is believed to be correct as of the date issued. REXCO MAKES NO WARRANTIES, EXPRESSED OR
IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR COURSE OF
PERFORMANCE OR USAGE OF TRADE. User is responsible for determining whether this product is fit for a particular purpose and suitable for user’s method
of use or application. Given the variety of factors that can affect the use and application of a product, some of which are uniquely within the user’s
knowledge and control, it is essential that the user evaluate this product to determine whether it is fit for a particular purpose and suitable for user’s
method of use or application.
10/10Revision date: 11/9/2023 Version: 5.4

37WA144_SDS.pdf