80EL319-H_TDS.pdf
product DATA SHEET
SikaBiresin CR77 FR
February 19, Version 01 /2021
1
product DATA SHEET
SikaBiresin CR77 FR
February 19, Version 01 /2021
1
PRODUCT DATA SHEET
SikaBiresin CR77 FR with CH77-2 Fast and CH77-4 Slow Hardeners
(FORMERLY EL-319)
EPOXY LAMINATING SYSTEM
FLAME RETARDANT, MEETS FAR 25.853 FLAME TESTING
DESCRIPTION
SikaBiresin
CR77 FR is a UV stabilized **Halogen-Free Flame Retardant Epoxy
Laminating System developed for use in fabricating parts or repairs on structures
which require flame retardant, self-extinguishing properties with room-
temperature curing capabilities (or post cure options).
SikaBiresin
CR77 FR resin is available with two hardener choices: SikaBiresin
CH77-2 Fast, a moderate work-life hardener for fast turnaround laminating of
production parts and repairs, or SikaBiresin
CH77-4 Slow, a long work-life
hardener for laminating and vacuum bagging of large parts and repairs.
**SikaBiresin
CR77 FR Resin does not contain PBDE or OBDE or DBDE
Flame retardant additive
Suitable for vacuum bagging or RTM
Applications areas include – Aerospace, transportation, architectural and
others
PROPERTIES
Low viscosity for good wet-out
Non-Halogen flame retardancy
Self-extinguishing
Two hardener choices (fast/slow)
RoHS and REACH compliant
Epoxy (non-styrene)
Excellent bond to all fabrics
TYPICAL PHYSICAL PROPERTIES
Units
SikaBiresin
CR77 FR (A)
Resin
SikaBiresin
CH77-2 (B)
Fast Hardener
SikaBiresin
CH77-4 (B)
Slow Hardener
Composition Epoxy Amine Amine
Mix ratio by weight 100 12 19
Aspect Clear Liquid Clear Liquid Clear Liquid
Color Visual Light Amber Light Amber Light Amber
Viscosity Brookfield Cps. 9,720 40 30
Viscosity Brookfield (mixed) Cps.
1,865 1,105
product DATA SHEET
SikaBiresin CR77 FR
February 19, Version 01 /2021
2
Density at 77 F (25 C) (mixed) lbs./gal (g/cc) 9.78 (1.17)
8.10 (.97) 7.94 (.95)
Pot life (200g) at 77 F (25 C) minutes 50 139
MECHANICAL PROPERTIES
MECHANICAL AND THERMAL PROPERTIES (NEAT FORM)
Property Test Method Units(s)
SikaBiresin
CH77-2 (B)
Fast Hardener*
SikaBiresin
CH77-2 (B)
Fast Hardener**
SikaBiresin
CH77-4 (B)
Slow Hardener**
SikaBiresin
CH77-4 (B)
Slow Hardener**
Hardness ASTM D2240 Shore D 87 88 87 87
Flexural strength ASTM D790 psi (MPa) 13,040 (90) 14,593 (101) 11,535 (80) 17,006 (117)
Flexural modulus ASTM D790 psi (MPa) 473,215 (3,265) 560,077 (3,864) 372,726 (2,572) 527,632 (3,641)
Tensile strength ASTM D638 psi (MPa) 7,510 (52) 9,799 (68) 7,067 (49) 10,424 (72)
Tensile modulus ASTM D638 psi (MPa) 341,734 (2,358) 349,476 (2,411) 250,994 (1,732) 309,786 (2,136)
Elongation ASTM D638 % 2.6 3.3 4.0 4.4
Tg (TMA) ASTM E1545 F ( C) 113 (45) 170 (77) 98 (38) 115 (45)
*Cure schedule: *7 day at 77 F (25 C) **24-36 hr at 77 F (25 C) + 4 hr 212 F (100 C)
Flame Retardant Properties**
Test Description Test Method Test Results
(F1) 60 second Vertical Burn Test FAR/JAR 25.853 Pass
(F2) 12 second- Vertical Burn Test Req. FAR/JAR 25.853 Pass
(F5) 30 second-45 Angle Burn Test FAR/JAR 25.853 Pass
** FAR/JAR 25.853 Appendix F, Part (a)(1)(i), (ii), (v) (4 ply 7500 Style E-Glass Laminate),
Cure schedule: 7 days/77 F (25 C). Testing done at third party laboratory.
PROCESSING
Normal health and safety precautions should be observed when handling these
products:
Ensure good ventilation.
Wear gloves, glasses and protective clothes.
For further information, please consult the Safety Data Sheets.
product DATA SHEET
SikaBiresin CR77 FR
February 19, Version 01 /2021
3
STORAGE CONDITIONS
Product shelf life of resin and hardener(s) is 24 months when stored in original
unopened containers between 65 77 F (15 25 C). Any opened can must be
tightly closed.
PACKAGING
Packaging information on request, please contact your local sales representative. or
find your local contact on www.sikaindustry.com
LEGAL NOTICE
The information, and, in particular, the recommendations relating to the application
and end-use of Sika products, are given in good faith based on Sika s current
knowledge and experience of the products when properly stored, handled and applied
under normal conditions in accordance with Sika s recommendations. In practice, the
differences in materials, substrates and actual site conditions are such that no
warranty in respect of merchantability or of fitness for a particular purpose, nor any
liability arising out of any legal relationship whatsoever, can be inferred either from
this information, or from any written recommendations, or from any other advice
offered. The user of the product must test the product s suitability for the intended
application and purpose. Sika reserves the right to change the properties of its
products. The proprietary rights of third parties must be observed. All orders are
accepted subject to our current terms of sale and delivery. Users must always refer to
the most recent issue of the local Product Data Sheet for the product concerned,
copies of which will be supplied on request.
CONTACT
UNITED STATES
Sika Corporation
30800 Stephenson Highway
Madison Heights, Michigan 48071 USA
Tel.: (+1) 248 588-2270
Fax: (+1) 248 577-0810
Website: www.sikaindustry.com
80EL319-G_TDS.pdf
SikaBiresin CR
77
FR
1 /
2
PRODUCT DATA SHEET
SikaBiresin CR77 FR
Version 01.01 (09 – 2024), en_US
PRODUCT DATA SHEET
SikaBiresin CR77 FR (Formerly EL-319)
Flame Retardant, Epoxy Laminating System
TYPICAL PHYSICAL PROPERTIES (FOR FURTHER VALUES SEE SAFETY DATA SHEET)
DESCRIPTION
SikaBiresin
CR77 FR is a UV stabilized,
halogen-free, flame retardant epoxy
laminating system. It is designed for use
in fabricating parts or for repairs on
structures which require flame
retardant and self-extinguishing
properties. SikaBiresin CR77 FR offers
both room temperature and post curing
capabilities.
PRODUCT BENEFITS
– Meets FAR 25.853 flame testing for aircraft
interiors and other areas where flame
retardant properties are required
– Non-halogen flame retardancy
– Self-extinguishing
– Epoxy (non- styrene)
– Excellent bond to all fabrics
AREAS OF APPLICATION
SikaBiresin CR77 FR is suitable for vacuum bag ged,
open molding, or resin transfer molding
applications. Areas of application include
aerospace, transportation, architectural, and
others.
Tests with actual materials and conditions
have to be performed to ensure satisfactory
performance.
Properties
SikaBiresin CR77 FR (A)
Resin
SikaBiresin CH77-2 (B) Fast
Hardener
Composition Epoxy Amine
Mix ratio by weight 100 12
Aspect Clear liquid Clear liquid
Color (mixed) Light amber
Viscosity Brookfield (mixed) 2,100 cps
Density at 77 F (25 C) (mixed) 9.86 lbs./gal
Pot life (220g) at 77 F (25 C) 68 minutes
SikaBiresin
CR
77
FR
2
/
2
Sika Corporation
30800 Stephenson Highway
Madison Heights, MI 48071
U.S.A.
Telephone: +1 248- 577-0020
Email: tsmh@us.sika.com
www.sikaindustry.com
TYPICAL MECHANICAL AND THERMAL PROPERTIES (NEAT FORM)
Cure Schedule: 24 hours at room temperature + 4 hours at 212 F (100 C)
FLAME RETARDENT PROPERTIES (NEAT FORM)
Tested according to FAR/JAR 25.853 Appendix F, Part (a)(1)(i), (ii), (v)
Cure Schedule: 24 hours at room temperature + 4 hours at 212 F (100 C)
PROCESSING
Alternative post-cure options can be used, if
needed, in processing. Contact Sika Corporation s
Industry Technical Services Department at
tsmh@us.sika.com for additional information and
advice.
Normal health and safety precautions should be
observed when handling these products:
Ensure adequate ventilation
Wear gloves, glasses, and protective clothes
For further information, please consult the Safety
Data Sheets
STORAGE CONDITIONS
Shelf life of resin and hardeners is 24 months
when stored in original, unopened containers
between 65-77 F (15 – 25 C). Keep containers
tightly closed.
PACKAGING INFORMATION
Packaging information is available upon
request. Please contact your local Sika sales
representative.
FURTHER INFORMATION
Advice on specific applications will be given on
request. To contact Sika Corporation s Industry
Technical Services Department, send an email to
tsmh@us.sika.com. Copies of Safety Data
Sheets and Product Data Sheets are available
upon request.
BASIS OF PRODUCT DATA
All technical data stated in this document are
based on laboratory tests. Actual measured data
may vary due to circumstances beyond our
control.
ENVIRONMENTAL, HEALTH AND SAFETY
For further information and advice regarding
transportation, handling, storage and disposal of
chemical products, user should refer to the
actual Safety Data Sheets containing physical,
environmental, toxicological and other safety
related data. User must read the current
actual Safety Data Sheets before using any
products. In case of an emergency, call
CHEMTREC at 1-800-424-9300, International
703-527-3887.
LEGAL DISCLAIMER
Prior to each use of any product of Sika Corporation,
its subsidiaries or affiliates ( SIKA ), the user must
always read and follow the warnings and
instructions on the product s most current product
label, Product Data Sheet and Safety Data Sheet
which are available at usa.sika.com or by contacting
IKA s Technical Service Department via email at
tsmh@us.sika.com. Nothing contained in any SIKA
literature or materials relieves the user of the
obligation to read and follow the warnings and
instructions for each SIKA product as set forth in the
current product label, Product Data Sheet and
Safety Data Sheet prior to use of the SIKA product.
SIKA warrants this product for one year from date
of installation to be free from manufacturing
defects and to meet the technical properties on the
current Product Data Sheet if used as directed
within the product s shelf life. User determines
suitability of product for intended use and assumes
all risks. User s and/or buyer s sole remedy shall be
limited to the purchase price or replacement of this
product exclusive of any labor costs. NO OTHER
WARRANTIES EXPRESS OR IMPLIED SHALL APPLY
INCLUDING ANY WARRANTY OF
MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE. SIKA SHALL NOT BE LIABLE
UNDER ANY LEGAL THEORY FOR SPECIAL OR
CONSEQUENTIAL DAMAGES. SIKA SHALL NOT BE
RESPONSIBLE FOR THE USE OF THIS PRODUCT IN A
MANNER TO INFRINGE ON ANY PATENT OR ANY
OTHER INTELLECTUAL PROPERTY RIGHTS HELD BY
OTHERS. Sale of SIKA products are subject to the
Terms and Conditions of Sale which are available at
https://usa.sika.com/en/group/SikaCorp/termsand
conditions.html or by calling +1 800-933-7452.
Properties, Test Method
SikaBiresin CR77 FR (A)
Resin
SikaBiresin CH77- 2 (B) Fast
Hardener
Shore D hardness, ASTM D2240 87
Flexural strength, ASTM D790 23,200 psi (160 MPa)
Flexural modulus, ASTM D790 548,000 psi (3,778 MPa)
Tensile strength, ASTM D638 9,689 psi (66.8 MPa)
Tensile modulus, ASTM D638 228,985 psi (1, 579 Mpa)
Tensile elongation, ASTM D638 5.3%
Tg (DMA), ASTM, ASTM D4065 199 F (93 C)
Test Description Test Method
Test Results
(F1) 60 Second Vertical Burn, 90 Vertical Ignition Test FAR/JAR 25.853 Pass
(F2) 12 Second Vertical Burn, 90 Vertical Ignition Test FAR/JAR 25.853 Pass
(F5) 30 second-45 Angle Burn Test FAR/JAR 25.853 Pass
80EL319-GS_TDS.pdf
product DATA SHEET
SikaBiresin CR77 FR
February 19, Version 01 /2021
1
product DATA SHEET
SikaBiresin CR77 FR
February 19, Version 01 /2021
1
PRODUCT DATA SHEET
SikaBiresin CR77 FR with CH77-2 Fast and CH77-4 Slow Hardeners
(FORMERLY EL-319)
EPOXY LAMINATING SYSTEM
FLAME RETARDANT, MEETS FAR 25.853 FLAME TESTING
DESCRIPTION
SikaBiresin
CR77 FR is a UV stabilized **Halogen-Free Flame Retardant Epoxy
Laminating System developed for use in fabricating parts or repairs on structures
which require flame retardant, self-extinguishing properties with room-
temperature curing capabilities (or post cure options).
SikaBiresin
CR77 FR resin is available with two hardener choices: SikaBiresin
CH77-2 Fast, a moderate work-life hardener for fast turnaround laminating of
production parts and repairs, or SikaBiresin
CH77-4 Slow, a long work-life
hardener for laminating and vacuum bagging of large parts and repairs.
**SikaBiresin
CR77 FR Resin does not contain PBDE or OBDE or DBDE
Flame retardant additive
Suitable for vacuum bagging or RTM
Applications areas include – Aerospace, transportation, architectural and
others
PROPERTIES
Low viscosity for good wet-out
Non-Halogen flame retardancy
Self-extinguishing
Two hardener choices (fast/slow)
RoHS and REACH compliant
Epoxy (non-styrene)
Excellent bond to all fabrics
TYPICAL PHYSICAL PROPERTIES
Units
SikaBiresin
CR77 FR (A)
Resin
SikaBiresin
CH77-2 (B)
Fast Hardener
SikaBiresin
CH77-4 (B)
Slow Hardener
Composition Epoxy Amine Amine
Mix ratio by weight 100 12 19
Aspect Clear Liquid Clear Liquid Clear Liquid
Color Visual Light Amber Light Amber Light Amber
Viscosity Brookfield Cps. 9,720 40 30
Viscosity Brookfield (mixed) Cps.
1,865 1,105
product DATA SHEET
SikaBiresin CR77 FR
February 19, Version 01 /2021
2
Density at 77 F (25 C) (mixed) lbs./gal (g/cc) 9.78 (1.17)
8.10 (.97) 7.94 (.95)
Pot life (200g) at 77 F (25 C) minutes 50 139
MECHANICAL PROPERTIES
MECHANICAL AND THERMAL PROPERTIES (NEAT FORM)
Property Test Method Units(s)
SikaBiresin
CH77-2 (B)
Fast Hardener*
SikaBiresin
CH77-2 (B)
Fast Hardener**
SikaBiresin
CH77-4 (B)
Slow Hardener**
SikaBiresin
CH77-4 (B)
Slow Hardener**
Hardness ASTM D2240 Shore D 87 88 87 87
Flexural strength ASTM D790 psi (MPa) 13,040 (90) 14,593 (101) 11,535 (80) 17,006 (117)
Flexural modulus ASTM D790 psi (MPa) 473,215 (3,265) 560,077 (3,864) 372,726 (2,572) 527,632 (3,641)
Tensile strength ASTM D638 psi (MPa) 7,510 (52) 9,799 (68) 7,067 (49) 10,424 (72)
Tensile modulus ASTM D638 psi (MPa) 341,734 (2,358) 349,476 (2,411) 250,994 (1,732) 309,786 (2,136)
Elongation ASTM D638 % 2.6 3.3 4.0 4.4
Tg (TMA) ASTM E1545 F ( C) 113 (45) 170 (77) 98 (38) 115 (45)
*Cure schedule: *7 day at 77 F (25 C) **24-36 hr at 77 F (25 C) + 4 hr 212 F (100 C)
Flame Retardant Properties**
Test Description Test Method Test Results
(F1) 60 second Vertical Burn Test FAR/JAR 25.853 Pass
(F2) 12 second- Vertical Burn Test Req. FAR/JAR 25.853 Pass
(F5) 30 second-45 Angle Burn Test FAR/JAR 25.853 Pass
** FAR/JAR 25.853 Appendix F, Part (a)(1)(i), (ii), (v) (4 ply 7500 Style E-Glass Laminate),
Cure schedule: 7 days/77 F (25 C). Testing done at third party laboratory.
PROCESSING
Normal health and safety precautions should be observed when handling these
products:
Ensure good ventilation.
Wear gloves, glasses and protective clothes.
For further information, please consult the Safety Data Sheets.
product DATA SHEET
SikaBiresin CR77 FR
February 19, Version 01 /2021
3
STORAGE CONDITIONS
Product shelf life of resin and hardener(s) is 24 months when stored in original
unopened containers between 65 77 F (15 25 C). Any opened can must be
tightly closed.
PACKAGING
Packaging information on request, please contact your local sales representative. or
find your local contact on www.sikaindustry.com
LEGAL NOTICE
The information, and, in particular, the recommendations relating to the application
and end-use of Sika products, are given in good faith based on Sika s current
knowledge and experience of the products when properly stored, handled and applied
under normal conditions in accordance with Sika s recommendations. In practice, the
differences in materials, substrates and actual site conditions are such that no
warranty in respect of merchantability or of fitness for a particular purpose, nor any
liability arising out of any legal relationship whatsoever, can be inferred either from
this information, or from any written recommendations, or from any other advice
offered. The user of the product must test the product s suitability for the intended
application and purpose. Sika reserves the right to change the properties of its
products. The proprietary rights of third parties must be observed. All orders are
accepted subject to our current terms of sale and delivery. Users must always refer to
the most recent issue of the local Product Data Sheet for the product concerned,
copies of which will be supplied on request.
CONTACT
UNITED STATES
Sika Corporation
30800 Stephenson Highway
Madison Heights, Michigan 48071 USA
Tel.: (+1) 248 588-2270
Fax: (+1) 248 577-0810
Website: www.sikaindustry.com
80EL319-5_TDS.pdf
SikaBiresin CR
77
FR
1 /
2
PRODUCT DATA SHEET
SikaBiresin CR77 FR
Version 01.01 (09 – 2024), en_US
PRODUCT DATA SHEET
SikaBiresin CR77 FR (Formerly EL-319)
Flame Retardant, Epoxy Laminating System
TYPICAL PHYSICAL PROPERTIES (FOR FURTHER VALUES SEE SAFETY DATA SHEET)
DESCRIPTION
SikaBiresin
CR77 FR is a UV stabilized,
halogen-free, flame retardant epoxy
laminating system. It is designed for use
in fabricating parts or for repairs on
structures which require flame
retardant and self-extinguishing
properties. SikaBiresin CR77 FR offers
both room temperature and post curing
capabilities.
PRODUCT BENEFITS
– Meets FAR 25.853 flame testing for aircraft
interiors and other areas where flame
retardant properties are required
– Non-halogen flame retardancy
– Self-extinguishing
– Epoxy (non- styrene)
– Excellent bond to all fabrics
AREAS OF APPLICATION
SikaBiresin CR77 FR is suitable for vacuum bag ged,
open molding, or resin transfer molding
applications. Areas of application include
aerospace, transportation, architectural, and
others.
Tests with actual materials and conditions
have to be performed to ensure satisfactory
performance.
Properties
SikaBiresin CR77 FR (A)
Resin
SikaBiresin CH77-2 (B) Fast
Hardener
Composition Epoxy Amine
Mix ratio by weight 100 12
Aspect Clear liquid Clear liquid
Color (mixed) Light amber
Viscosity Brookfield (mixed) 2,100 cps
Density at 77 F (25 C) (mixed) 9.86 lbs./gal
Pot life (220g) at 77 F (25 C) 68 minutes
SikaBiresin
CR
77
FR
2
/
2
Sika Corporation
30800 Stephenson Highway
Madison Heights, MI 48071
U.S.A.
Telephone: +1 248- 577-0020
Email: tsmh@us.sika.com
www.sikaindustry.com
TYPICAL MECHANICAL AND THERMAL PROPERTIES (NEAT FORM)
Cure Schedule: 24 hours at room temperature + 4 hours at 212 F (100 C)
FLAME RETARDENT PROPERTIES (NEAT FORM)
Tested according to FAR/JAR 25.853 Appendix F, Part (a)(1)(i), (ii), (v)
Cure Schedule: 24 hours at room temperature + 4 hours at 212 F (100 C)
PROCESSING
Alternative post-cure options can be used, if
needed, in processing. Contact Sika Corporation s
Industry Technical Services Department at
tsmh@us.sika.com for additional information and
advice.
Normal health and safety precautions should be
observed when handling these products:
Ensure adequate ventilation
Wear gloves, glasses, and protective clothes
For further information, please consult the Safety
Data Sheets
STORAGE CONDITIONS
Shelf life of resin and hardeners is 24 months
when stored in original, unopened containers
between 65-77 F (15 – 25 C). Keep containers
tightly closed.
PACKAGING INFORMATION
Packaging information is available upon
request. Please contact your local Sika sales
representative.
FURTHER INFORMATION
Advice on specific applications will be given on
request. To contact Sika Corporation s Industry
Technical Services Department, send an email to
tsmh@us.sika.com. Copies of Safety Data
Sheets and Product Data Sheets are available
upon request.
BASIS OF PRODUCT DATA
All technical data stated in this document are
based on laboratory tests. Actual measured data
may vary due to circumstances beyond our
control.
ENVIRONMENTAL, HEALTH AND SAFETY
For further information and advice regarding
transportation, handling, storage and disposal of
chemical products, user should refer to the
actual Safety Data Sheets containing physical,
environmental, toxicological and other safety
related data. User must read the current
actual Safety Data Sheets before using any
products. In case of an emergency, call
CHEMTREC at 1-800-424-9300, International
703-527-3887.
LEGAL DISCLAIMER
Prior to each use of any product of Sika Corporation,
its subsidiaries or affiliates ( SIKA ), the user must
always read and follow the warnings and
instructions on the product s most current product
label, Product Data Sheet and Safety Data Sheet
which are available at usa.sika.com or by contacting
IKA s Technical Service Department via email at
tsmh@us.sika.com. Nothing contained in any SIKA
literature or materials relieves the user of the
obligation to read and follow the warnings and
instructions for each SIKA product as set forth in the
current product label, Product Data Sheet and
Safety Data Sheet prior to use of the SIKA product.
SIKA warrants this product for one year from date
of installation to be free from manufacturing
defects and to meet the technical properties on the
current Product Data Sheet if used as directed
within the product s shelf life. User determines
suitability of product for intended use and assumes
all risks. User s and/or buyer s sole remedy shall be
limited to the purchase price or replacement of this
product exclusive of any labor costs. NO OTHER
WARRANTIES EXPRESS OR IMPLIED SHALL APPLY
INCLUDING ANY WARRANTY OF
MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE. SIKA SHALL NOT BE LIABLE
UNDER ANY LEGAL THEORY FOR SPECIAL OR
CONSEQUENTIAL DAMAGES. SIKA SHALL NOT BE
RESPONSIBLE FOR THE USE OF THIS PRODUCT IN A
MANNER TO INFRINGE ON ANY PATENT OR ANY
OTHER INTELLECTUAL PROPERTY RIGHTS HELD BY
OTHERS. Sale of SIKA products are subject to the
Terms and Conditions of Sale which are available at
https://usa.sika.com/en/group/SikaCorp/termsand
conditions.html or by calling +1 800-933-7452.
Properties, Test Method
SikaBiresin CR77 FR (A)
Resin
SikaBiresin CH77- 2 (B) Fast
Hardener
Shore D hardness, ASTM D2240 87
Flexural strength, ASTM D790 23,200 psi (160 MPa)
Flexural modulus, ASTM D790 548,000 psi (3,778 MPa)
Tensile strength, ASTM D638 9,689 psi (66.8 MPa)
Tensile modulus, ASTM D638 228,985 psi (1, 579 Mpa)
Tensile elongation, ASTM D638 5.3%
Tg (DMA), ASTM, ASTM D4065 199 F (93 C)
Test Description Test Method
Test Results
(F1) 60 Second Vertical Burn, 90 Vertical Ignition Test FAR/JAR 25.853 Pass
(F2) 12 Second Vertical Burn, 90 Vertical Ignition Test FAR/JAR 25.853 Pass
(F5) 30 second-45 Angle Burn Test FAR/JAR 25.853 Pass
80EL319-5S_TDS.pdf
product DATA SHEET
SikaBiresin CR77 FR
February 19, Version 01 /2021
1
product DATA SHEET
SikaBiresin CR77 FR
February 19, Version 01 /2021
1
PRODUCT DATA SHEET
SikaBiresin CR77 FR with CH77-2 Fast and CH77-4 Slow Hardeners
(FORMERLY EL-319)
EPOXY LAMINATING SYSTEM
FLAME RETARDANT, MEETS FAR 25.853 FLAME TESTING
DESCRIPTION
SikaBiresin
CR77 FR is a UV stabilized **Halogen-Free Flame Retardant Epoxy
Laminating System developed for use in fabricating parts or repairs on structures
which require flame retardant, self-extinguishing properties with room-
temperature curing capabilities (or post cure options).
SikaBiresin
CR77 FR resin is available with two hardener choices: SikaBiresin
CH77-2 Fast, a moderate work-life hardener for fast turnaround laminating of
production parts and repairs, or SikaBiresin
CH77-4 Slow, a long work-life
hardener for laminating and vacuum bagging of large parts and repairs.
**SikaBiresin
CR77 FR Resin does not contain PBDE or OBDE or DBDE
Flame retardant additive
Suitable for vacuum bagging or RTM
Applications areas include – Aerospace, transportation, architectural and
others
PROPERTIES
Low viscosity for good wet-out
Non-Halogen flame retardancy
Self-extinguishing
Two hardener choices (fast/slow)
RoHS and REACH compliant
Epoxy (non-styrene)
Excellent bond to all fabrics
TYPICAL PHYSICAL PROPERTIES
Units
SikaBiresin
CR77 FR (A)
Resin
SikaBiresin
CH77-2 (B)
Fast Hardener
SikaBiresin
CH77-4 (B)
Slow Hardener
Composition Epoxy Amine Amine
Mix ratio by weight 100 12 19
Aspect Clear Liquid Clear Liquid Clear Liquid
Color Visual Light Amber Light Amber Light Amber
Viscosity Brookfield Cps. 9,720 40 30
Viscosity Brookfield (mixed) Cps.
1,865 1,105
product DATA SHEET
SikaBiresin CR77 FR
February 19, Version 01 /2021
2
Density at 77 F (25 C) (mixed) lbs./gal (g/cc) 9.78 (1.17)
8.10 (.97) 7.94 (.95)
Pot life (200g) at 77 F (25 C) minutes 50 139
MECHANICAL PROPERTIES
MECHANICAL AND THERMAL PROPERTIES (NEAT FORM)
Property Test Method Units(s)
SikaBiresin
CH77-2 (B)
Fast Hardener*
SikaBiresin
CH77-2 (B)
Fast Hardener**
SikaBiresin
CH77-4 (B)
Slow Hardener**
SikaBiresin
CH77-4 (B)
Slow Hardener**
Hardness ASTM D2240 Shore D 87 88 87 87
Flexural strength ASTM D790 psi (MPa) 13,040 (90) 14,593 (101) 11,535 (80) 17,006 (117)
Flexural modulus ASTM D790 psi (MPa) 473,215 (3,265) 560,077 (3,864) 372,726 (2,572) 527,632 (3,641)
Tensile strength ASTM D638 psi (MPa) 7,510 (52) 9,799 (68) 7,067 (49) 10,424 (72)
Tensile modulus ASTM D638 psi (MPa) 341,734 (2,358) 349,476 (2,411) 250,994 (1,732) 309,786 (2,136)
Elongation ASTM D638 % 2.6 3.3 4.0 4.4
Tg (TMA) ASTM E1545 F ( C) 113 (45) 170 (77) 98 (38) 115 (45)
*Cure schedule: *7 day at 77 F (25 C) **24-36 hr at 77 F (25 C) + 4 hr 212 F (100 C)
Flame Retardant Properties**
Test Description Test Method Test Results
(F1) 60 second Vertical Burn Test FAR/JAR 25.853 Pass
(F2) 12 second- Vertical Burn Test Req. FAR/JAR 25.853 Pass
(F5) 30 second-45 Angle Burn Test FAR/JAR 25.853 Pass
** FAR/JAR 25.853 Appendix F, Part (a)(1)(i), (ii), (v) (4 ply 7500 Style E-Glass Laminate),
Cure schedule: 7 days/77 F (25 C). Testing done at third party laboratory.
PROCESSING
Normal health and safety precautions should be observed when handling these
products:
Ensure good ventilation.
Wear gloves, glasses and protective clothes.
For further information, please consult the Safety Data Sheets.
product DATA SHEET
SikaBiresin CR77 FR
February 19, Version 01 /2021
3
STORAGE CONDITIONS
Product shelf life of resin and hardener(s) is 24 months when stored in original
unopened containers between 65 77 F (15 25 C). Any opened can must be
tightly closed.
PACKAGING
Packaging information on request, please contact your local sales representative. or
find your local contact on www.sikaindustry.com
LEGAL NOTICE
The information, and, in particular, the recommendations relating to the application
and end-use of Sika products, are given in good faith based on Sika s current
knowledge and experience of the products when properly stored, handled and applied
under normal conditions in accordance with Sika s recommendations. In practice, the
differences in materials, substrates and actual site conditions are such that no
warranty in respect of merchantability or of fitness for a particular purpose, nor any
liability arising out of any legal relationship whatsoever, can be inferred either from
this information, or from any written recommendations, or from any other advice
offered. The user of the product must test the product s suitability for the intended
application and purpose. Sika reserves the right to change the properties of its
products. The proprietary rights of third parties must be observed. All orders are
accepted subject to our current terms of sale and delivery. Users must always refer to
the most recent issue of the local Product Data Sheet for the product concerned,
copies of which will be supplied on request.
CONTACT
UNITED STATES
Sika Corporation
30800 Stephenson Highway
Madison Heights, Michigan 48071 USA
Tel.: (+1) 248 588-2270
Fax: (+1) 248 577-0810
Website: www.sikaindustry.com
80EL315-5_TDS.pdf
SikaBiresin CR
163
FR
1 /
2
PRODUCT DATA SHEET
SikaBiresin CR163
Version 01.01 (07 – 2023), en_US
PRODUCT DATA SHEET
SikaBiresin CR163 (Formerly EL-315)
Epoxy Laminating System with High Temperature Resistance
TYPICAL PHYSICAL PROPERTIES (FOR FURTHER VALUES SEE SAFETY DATA SHEET)
DESCRIPTION
SikaBiresin CR163 is a premium
performance, high temperature epoxy
laminating system developed to
withstand extreme heat conditions in
composite tooling applications, such
as autoclave, bonding jigs, oven cured
processing, or heat induction resin
transfer molding (RTM). SikaBiresin
CR163 is available with a choice of
three hardener options, each offering
different working times to support
required construction and bagging
times on various sized laminates.
SikaBiresin CR163 exhibits excellent
physical and mechanical properties,
resulting in a dimensionally stable and
durable composite mold or final part.
PRODUCT BENEFITS
– Good wet-out
– Three hardener choices for process
flexibility
– Post-curing options available
– Up to 450 F (223 C) Tg with SikaBiresin
CH163- 6 (B) hardener
– Excellent bond to all fabrics
– Excellent physical and mechanical
properties
QUALIFICATIONS
SikaBiresin CR163 (A) resin and SikaBiresin
CH163- 2 (B) hardener meet the following
qualifications:
– Boeing MMS-102
– Boeing M41-03-01 Code RHL
– IHL McDonnell Douglas C1-655, QPL Code
L-3
AREAS OF APPLICATION
SikaBiresin CR163 is suitable for manufacturing
composite tools or parts that are exposed to high
temperature conditions. Recommended processes
and applications include oven cured vacuum
bagged or autoclave molding applications, heated
RTM tools and parts, bonding jigs, and others.
Tests with actual materials and conditions
have to be performed to ensure satisfactory
performance.
Properties
SikaBiresin CR163 (A)
Resin
SikaBiresin CH163-1 (B)
Hardener
SikaBiresin CH163-2 (B)
Hardener
SikaBiresin CH163-6 (B)
Hardener
Composition Epoxy Amine Amine Amine
Mix ratio by weight 100 19 25 24
Aspect Clear liquid Liquid Liquid Liquid
Color (mixed) n/a Amber Black Amber
Viscosity Brookfield (mixed) n/a 2,000 – 3,000 cps 2,500 4,000 cps 4,000 5,000 cps
Density at 77 F (25 C) (mixed) n/a 9.09 lbs./gal 9.85 lbs./gal 9.51 lbs./gal
Work time at 77 F (25 C) n/a 50 – 60 minutes 50 – 75 minutes 180 210 minutes
SikaBiresin
CR163 FR
2
/
2
Sika Corporation
30800 Stephenson Highway
Madison Heights, MI 48071
U.S.A.
Telephone: +1 248- 577-0020
Email: tsmh@us.sika.com
www.sikausa.com
TYPICAL MECHANICAL AND THERMAL PROPERTIES (NEAT OR COMPOSITE* FORM)
Cure schedule: Samples tested after 24 hours at 77 F (25 C) + 2 hours at 200 F (93 C) + 2 hours at 250 F (121 C) + 2 hours at 300 F (149 C) + 3
hours at 350 F (177 C)
* Denotes physical testing conducted on 6 ply 7500 Style E-Glass Laminate
PROCESSING
A prelimInary self-support cure schedule can
be used on a model, mold, or plug. Cure for 24
hours at 77 F (25 C) + 6 hours at 150 F (66 C).
You may attach support structure and de-
mold tool after this schedule is completed,
then apply post-cure. It is recommended to
install thermocouples to monitor the mold
temperature throughout the post cure
process, if possible.
POST-CURE HEATING AND COOLING RATES
Always allow tools made with Sika high
temperature epoxy systems to gel at room
temperature before subjecting them to post
cure (24 hours is usually sufficient). This will
prevent excessive exotherm and shrink stress
from occurring. When oven curing laminated
molds, always place the mold in a room
temperature oven. Increase oven
temperature at a rate of no more than 50 F
(30 C) per hour. When heat cure is
completed, turn off oven and allow molds to
remain in the oven. Never remove mold from
oven until mold temperature has been
lowered to less than 100 F (38 C). A lternative
post-cure options can be used, if needed, in
processing. Contact Sika Corporation s Industry
Technical Services Department at
tsmh@us.sika.com for additional information and
advice.
Normal health and safety precautions should be
observed when handling these products:
Ensure adequate ventilation
Wear gloves, glasses, and protective clothes
For further information, please consult the Safety
Data Sheets.
STORAGE CONDITIONS
Shelf life of resin and hardeners is 24 months
when stored in original, unopened containers
between 65-77 F (15 – 25 C). Any opened can
must be tightly closed.
PACKAGING INFORMATION
Packaging information is available upon
request. Please contact your local Sika sales
representative.
FURTHER INFORMATION
Advice on specific applications will be given on
request. To contact Sika Corporation s Industry
Technical Services Department, send an email to
tsmh@us.sika.com. Copies of Safety Data
Sheets and Product Data Sheets are available
upon request.
BASIS OF PRODUCT DATA
All technical data stated in this document are
based on laboratory tests. Actual measured data
may vary due to circumstances beyond our
control.
ENVIRONMENTAL, HEALTH AND SAFETY
For further information and advice regarding
transportation, handling, storage and disposal of
chemical products, user should refer to the
actual Safety Data Sheets containing physical,
environmental, toxicological and other safety
related data. User must read the current
actual Safety Data Sheets before using any
products. In case of an emergency, call
CHEMTREC at 1-800-424-9300, International
703-527-3887.
LEGAL DISCLAIMER
Prior to each use of any product of Sika Corporation,
its subsidiaries or affiliates ( SIKA ), the user must
always read and follow the warnings and
instructions on the product s most current product
label, Product Data Sheet and Safety Data Sheet
which are available at usa.sika.com or by contacting
SIKA s Technical Service Department via email at
tsmh@us.sika.com. Nothing contained in any SIKA
literature or materials relieves the user of the
obligation to read and follow the warnings and
instructions for each SIKA product as set forth in the
current product label, Product Data Sheet and
Safety Data Sheet prior to use of the SIKA product.
SIKA warrants this product for one year from date
of installation to be free from manufacturing
defects and to meet the technical properties on the
current Product Data Sheet if used as directed
within the product s shelf life. User determines
suitability of product for intended use and assumes
all risks. User s and/or buyer s sole remedy shall be
limited to the purchase price or replacement of this
product exclusive of any labor costs. NO OTHER
WARRANTIES EXPRESS OR IMPLIED SHALL APPLY
INCLUDING ANY WARRANTY OF
MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE. SIKA SHALL NOT BE LIABLE
UNDER ANY LEGAL THEORY FOR SPECIAL OR
CONSEQUENTIAL DAMAGES. SIKA SHALL NOT BE
RESPONSIBLE FOR THE USE OF THIS PRODUCT IN A
MANNER TO INFRINGE ON ANY PATENT OR ANY
OTHER INTELLECTUAL PROPERTY RIGHTS HELD BY
OTHERS. Sale of SIKA products are subject to the
Terms and Conditions of Sale which are available at
https://usa.sika.com/en/group/SikaCorp/termsand
conditions.html or by calling +1 800-933-7452.
Properties, Test Method
Mixed with SikaBiresin CR163 (A) Resin
SikaBiresin CH163-1 (B)
Hardener
SikaBiresin CH163-2 (B)
Hardener
SikaBiresin CH163-6 (B)
Hardener
Shore D hardness, ASTM D2240 90 88 90
Glass Transition Temp. ( Tg), ASTM D4065 305 F (152 C) 331 F (166 C) 450 F (232 C)
*Tensile strength, ASTM D638 62,630 psi (432 MPa) 33,690 psi (232 MPa) 56,090 psi (525 MPa)
*Tensile modulus, ASTM D638 4,048,000 psi (27,910 MPa)
2,593,000 psi (17,878 MPa) 3,504,000 psi (24,159 MPa)
*Tensile elongation, ASTM D638 1.7% 1.8% n/a
*Flexural strength, ASTM D790 90,480 psi (624 MPa) 44,540 psi (307 MPa) 76,200 psi (525 MPa)
*Flexural modulus, ASTM D790 4,642,000 psi (32,005 MPa) 2,296,000 psi (15,830 MPa) 3,504,000 psi (24,159 MPa)
Notched izod Impact strength , ASTM D648 6.5 in-lbf/in 4.5 in-lbf/in 4.5 in-lbf/in
80EL302PC5_TDS.pdf
TECHNICAL DATA SHEET
SikaBiresin L302
February 19, Version 01 /2021
1
TECHNICAL DATA SHEET
SikaBiresin L302
February 19, Version 01 /2021
1
TECHNICAL DATA SHEET
SikaBiresin L302
EPOXY LAMINATING SYSTEM
WHITE, ROOM TEMPERATURE, HARDENER CHOICE SIKABIRESIN L302-1
DESCRIPTION
SikaBiresin
L302 is a white room temperature laminating system with excellent handling characteristics,
low viscosity and high strength. Its low toxicity makes it ideal for laminated tooling and production
applications. SikaBiresin
L302 exhibits excellent dimensional stability, high mechanical strength and
excellent cloth penetration (wet-out) without run- out. Use SikaBiresin
L302 with epoxy surface coat
systems ES-218 or TCC- 352 for high early strength properties. SikaBiresin
L302 Resin is available with
the following hardener options: SikaBiresin
L302-1 Hardener (see work life details listed below). Typical
applications include: prototypes, keller models, master models, patterns and core boxes, checking
fixtures, production parts, trim fixtures, holding fixtures, duplications and router and drill fixtures.
High mechanical properties
Excellent dimensional stability
Excellent wet-out
Low vertical drain off
APPLICATIONS
Prototypes, patterns and core boxes
Master models, Keller Models
Production parts
Trim, holding, and checking fixtures
Duplication splashes
Router and drill fixtures
PHYSICAL PROPERTIES
Property
SikaBiresin L302
Resin
SikaBiresin L302-1
Hardener
Composition Epoxy Amine
Mix ratio by weight 100 16
Mix ratio by volume 100 23
Aspect Thixotropic Liquid Liquid
Color White Clear amber
Mixed viscosity at 77 F (25 C) (mPa.s) ASTM D2393 2,500 3,500
Specific Gravity at 77 F (25 C) ASTM D792 1.40 .97
Pot life at 77 F (25 C) (220 g) (Minutes) ASTM D2471 28 – 34
Demold time (hours) 16 – 24
TECHNICAL DATA SHEET
SikaBiresin L302
February 19, Version 01 /2021
2
Neat – Mechanical and Thermal Properties
(1)
Properties Method
Unit SikaBiresin L302
(Mixed)
Hardness
ASTM D2240
Shore D 85
Tensile Elongation ASTM D638 % 1.1
Compressive
Strength
ASTM D695 psi (MPa) 13,840 (95)
Shrinkage ASTM D2566 in/in 0.0002
Coefficient of
Thermal
Expansion
TMA
ppm/ F ( C)
16 (29)
Notched Izod
Impact Strength
D256
In-lbs/in (J/m) 13.9 (742)
(1)
The above properties were obtained under laboratory conditions using
standardized specimens. Cured 7 days at room temperature
HANDLING PRECAUTIONS
Normal health and safety precautions should be observed when handling these products:
Ensure good ventilation.
Wear gloves, glasses and protective clothes.
For further information, please consult the Safety Data Sheets.
STORAGE CONDITIONS
This product has a shelf life of 24 months for the resin and hardener as indicated by the
expiration date on the container when stored in original unopened containers.
PACKAGING
Packaging information on request, please contact your local sales representative or find your
local contact on www.sikaadvancedresins. us
LEGAL NOTICE
The information, and, in particular, the recommendations relating to the application and
end-use of Sika products, are given in good faith based on Sika s current knowledge and
experience of the products when properly stored, handled and applied under normal
conditions in accordance with Sika s recommendations. In practice, the differences in
materials, substrates and actual site conditions are such that no warranty in respect of
merchantability or of fitness for a particular purpose, nor any liability arising out of any legal
relationship whatsoever, can be inferred either from this information, or from any written
recommendations, or from any other advice offered. The user of the product must test the
product s suitability for the intended application and purpose. Sika reserves the right to
change the properties of its products. The proprietary rights of third parties must be
observed. All orders are accepted subject to our current terms of sale and delivery. Users
must always refer to the most recent issue of the local Product Data Sheet for the product
concerned, copies of which will be supplied on request.
TECHNICAL DATA SHEET
SikaBiresin L302
February 19, Version 01 /2021
3
CONTACT
UNITED STATES
Sika Corporation
30800 Stephenson Highway
Madison Heights, Michigan 48071 USA
Tel.: (+1) 248 588- 2270
Fax: (+1) 248 577-0810
E-mail: advanced.resins@us.sika.com
Website: www.sikaadvancedresins.us
80EC433B3-5_TDS.pdf
TECHNICAL DATA SHEET
EC-433
February 19, Version 01 /2021
1
TECHNICAL DATA SHEET
EC-433
February 19, Version 01 /2021
1
TECHNICAL DATA SHEET
EC-433
HIGH TEMPERATURE EPOXY CASTING SYSTEM
ALUMINUM FILLED
DESCRIPTION
EC-433 aluminum filled epoxy casting systems are developed for use in heat resistant tooling applications such as
prototype injection molding, vacuum forming, and other high temperature cast tooling applications. EC-433 offers 3
hardener options with various working times, suitable for any tool size. EC-433 is a room temperature hardening (B
Stage) system, but a post cure is necessary for use over 150 F (66 C). Tools made with EC-433 can be used at
continuous temperatures of 300 F (160 C) and intermittent temperatures up to 350 F (177 C). EC-433 features easy
mixing, accepts higher loading of bulk aluminum, and exhibits greater dimensional stability.
APPLICATIONS
Vacuum Form Molds
Compression Molds
Prototype Injection Moldings
RIM Molds
Foam Molds
Other High Temp Cast Applications
TECHNICAL DATA SHEET
EC-433
February 19, Version 01 /2021
2
PROPERTIES
PROCESSING
RECOMMENDED CURE SCHEDULE
PRELIMINARY CURE:
24 hours @ 77 F (25 C) + 3 hours @ 150 F (66 C) is the minimum cure temperature
You may de-mold tool after the preliminary schedule is complete and the tool has cooled.
POST CURE SCHEDULE:
A conditioning post cure at a temperature equivalent to the constant operational temperature of your production mold is
advised. If an additional post cure is necessary beyond the preliminary cure schedule, the recommended cure schedule is
as follows:
2 hours @ 200 F (93 C)
2 hours @ 250 F (121 C)
2 hours @ 300 F (149 C)
Ensure proper heat curing temperatures are met by installing a thermocouple directly in the center of the tool.
Notes: It is always advisable to heat cure cast epoxy molds internally by using the copper tubing temperature control
system built into your mold.
***If oven curing is your only option, it is advisable to complete the initial cure on the model at 125 F (52 C) for 8 hours
or overnight before reverting to the higher post cure temperatures outlined above.
TECHNICAL DATA SHEET
EC-433
February 19, Version 01 /2021
3
***Extremely large cast molds should always be heat cured internally and not moved or transported prior to
completing an internal heat cure process of 150 F (66 C) minimum.
***Always allow a cast tool to cure 24hrs at room temperature before heat cure. This will prevent excessive exotherm and
shrink stress from occurring.
***When taking cast tools through a preliminary or post cure phase always place tool in a room temperature oven and
increase temperature at a rate of no more than 50 F (30 C) per hour.
***When cooling cast tools, always allow tool to remain in heat environment and decrease temperature at a rate of no
more than 50 F (30 C) per hour. Do not remove tool from heat environment until center of tool has reached 100 F (38 C)
or less. Removing tool at temperatures above 100 F (38 C) can result in thermal shock and warping.
Infused laminate – Carbon fiber, 3K plain weave, 8 layer, 0-90 rotation, 37% resin content
*1hr/50 C + 1hr/80 C + 2hr/120 C + 4hr/150 C cure **1hr/60 C + 1hr/80 C + 2hr/120 C + 4hr/180 C cure
HANDLING PRECAUTIONS
Normal health and safety precautions should be observed when handling these products:
Ensure good ventilation.
Wear gloves, glasses and protective clothes.
For further information, please consult the Safety Data Sheets.
STORAGE CONDITIONS
This product has a shelf life of 12 months for the resin as indicated by the expiration date
on the container when stored in original unopened containers between 47 F 77 F (8 C
25 C). The product shelf life for the hardener is 24 months between 60 F (15 C) and
77 F (25 C). Any opened can must be tightly closed.
PACKAGING
Packaging information on request, please contact your local sales representative or find your
local contact on www.sikaadvancedresins.us
TECHNICAL DATA SHEET
EC-433
February 19, Version 01 /2021
4
LEGAL NOTICE
The information, and, in particular, the recommendations relating to the application and
end-use of Sika products, are given in good faith based on Sika s current knowledge and
experience of the products when properly stored, handled and applied under normal
conditions in accordance with Sika s recommendations. In practice, the differences in
materials, substrates and actual site conditions are such that no warranty in respect of
merchantability or of fitness for a particular purpose, nor any liability arising out of any legal
relationship whatsoever, can be inferred either from this information, or from any written
recommendations, or from any other advice offered. The user of the product must test the
product s suitability for the intended application and purpose. Sika reserves the right to
change the properties of its products. The proprietary rights of third parties must be
observed. All orders are accepted subject to our current terms of sale and delivery. Users
must always refer to the most recent issue of the local Product Data Sheet for the product
concerned, copies of which will be supplied on request.
CONTACT
UNITED STATES
Sika Corporation
30800 Stephenson Highway
Madison Heights, Michigan 48071 USA
Tel.: (+1) 248 588-2270
Fax: (+1) 248 577-0810
E-mail: advanced.resins@us.sika.com
Website: www.sikaadvancedresins.us
80EC433B-5_TDS.pdf
TECHNICAL DATA SHEET
EC-433
February 19, Version 01 /2021
1
TECHNICAL DATA SHEET
EC-433
February 19, Version 01 /2021
1
TECHNICAL DATA SHEET
EC-433
HIGH TEMPERATURE EPOXY CASTING SYSTEM
ALUMINUM FILLED
DESCRIPTION
EC-433 aluminum filled epoxy casting systems are developed for use in heat resistant tooling applications such as
prototype injection molding, vacuum forming, and other high temperature cast tooling applications. EC-433 offers 3
hardener options with various working times, suitable for any tool size. EC-433 is a room temperature hardening (B
Stage) system, but a post cure is necessary for use over 150 F (66 C). Tools made with EC-433 can be used at
continuous temperatures of 300 F (160 C) and intermittent temperatures up to 350 F (177 C). EC-433 features easy
mixing, accepts higher loading of bulk aluminum, and exhibits greater dimensional stability.
APPLICATIONS
Vacuum Form Molds
Compression Molds
Prototype Injection Moldings
RIM Molds
Foam Molds
Other High Temp Cast Applications
TECHNICAL DATA SHEET
EC-433
February 19, Version 01 /2021
2
PROPERTIES
PROCESSING
RECOMMENDED CURE SCHEDULE
PRELIMINARY CURE:
24 hours @ 77 F (25 C) + 3 hours @ 150 F (66 C) is the minimum cure temperature
You may de-mold tool after the preliminary schedule is complete and the tool has cooled.
POST CURE SCHEDULE:
A conditioning post cure at a temperature equivalent to the constant operational temperature of your production mold is
advised. If an additional post cure is necessary beyond the preliminary cure schedule, the recommended cure schedule is
as follows:
2 hours @ 200 F (93 C)
2 hours @ 250 F (121 C)
2 hours @ 300 F (149 C)
Ensure proper heat curing temperatures are met by installing a thermocouple directly in the center of the tool.
Notes: It is always advisable to heat cure cast epoxy molds internally by using the copper tubing temperature control
system built into your mold.
***If oven curing is your only option, it is advisable to complete the initial cure on the model at 125 F (52 C) for 8 hours
or overnight before reverting to the higher post cure temperatures outlined above.
TECHNICAL DATA SHEET
EC-433
February 19, Version 01 /2021
3
***Extremely large cast molds should always be heat cured internally and not moved or transported prior to
completing an internal heat cure process of 150 F (66 C) minimum.
***Always allow a cast tool to cure 24hrs at room temperature before heat cure. This will prevent excessive exotherm and
shrink stress from occurring.
***When taking cast tools through a preliminary or post cure phase always place tool in a room temperature oven and
increase temperature at a rate of no more than 50 F (30 C) per hour.
***When cooling cast tools, always allow tool to remain in heat environment and decrease temperature at a rate of no
more than 50 F (30 C) per hour. Do not remove tool from heat environment until center of tool has reached 100 F (38 C)
or less. Removing tool at temperatures above 100 F (38 C) can result in thermal shock and warping.
Infused laminate – Carbon fiber, 3K plain weave, 8 layer, 0-90 rotation, 37% resin content
*1hr/50 C + 1hr/80 C + 2hr/120 C + 4hr/150 C cure **1hr/60 C + 1hr/80 C + 2hr/120 C + 4hr/180 C cure
HANDLING PRECAUTIONS
Normal health and safety precautions should be observed when handling these products:
Ensure good ventilation.
Wear gloves, glasses and protective clothes.
For further information, please consult the Safety Data Sheets.
STORAGE CONDITIONS
This product has a shelf life of 12 months for the resin as indicated by the expiration date
on the container when stored in original unopened containers between 47 F 77 F (8 C
25 C). The product shelf life for the hardener is 24 months between 60 F (15 C) and
77 F (25 C). Any opened can must be tightly closed.
PACKAGING
Packaging information on request, please contact your local sales representative or find your
local contact on www.sikaadvancedresins.us
TECHNICAL DATA SHEET
EC-433
February 19, Version 01 /2021
4
LEGAL NOTICE
The information, and, in particular, the recommendations relating to the application and
end-use of Sika products, are given in good faith based on Sika s current knowledge and
experience of the products when properly stored, handled and applied under normal
conditions in accordance with Sika s recommendations. In practice, the differences in
materials, substrates and actual site conditions are such that no warranty in respect of
merchantability or of fitness for a particular purpose, nor any liability arising out of any legal
relationship whatsoever, can be inferred either from this information, or from any written
recommendations, or from any other advice offered. The user of the product must test the
product s suitability for the intended application and purpose. Sika reserves the right to
change the properties of its products. The proprietary rights of third parties must be
observed. All orders are accepted subject to our current terms of sale and delivery. Users
must always refer to the most recent issue of the local Product Data Sheet for the product
concerned, copies of which will be supplied on request.
CONTACT
UNITED STATES
Sika Corporation
30800 Stephenson Highway
Madison Heights, Michigan 48071 USA
Tel.: (+1) 248 588-2270
Fax: (+1) 248 577-0810
E-mail: advanced.resins@us.sika.com
Website: www.sikaadvancedresins.us