EXPOY PRODUCTS | Revchem Composites

80LS-19B-D_SDS.pdf

by | Sep 27, 2025

Clear Laminating Hardener
Safety Data Sheet 80LS-19B
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
Date of issue: 07/13/2015 Revision date: 07/13/2015 Version: 1.0

07/13/2015 EN (English) SDS ID: 80LS-19B Page 1

SECTION 1: Identification of the substance/mixture and of the company/undertaking

1.1. Product identifier
Product form : Mixture
Trade name : Clear Laminating Hardener
CAS No : Mixture
Product code : 80LS-19B
Other means of identification : DISTRIBUTED BY REVCHEM COMPOSITES, INC

1.2. Relevant identified uses of the substance or mixture and uses advised against
Use of the substance/mixture : Clear Laminating Hardener

1.3. Details of the supplier of the safety data sheet
Dura Technologies, Inc.
2720 South Willow Avenue #A
Bloomington, CA 92316

909.877.8477
ChemTrec US: 800.424.9300
ChemTrec Int: +1 70 3527 3887

1.4. Emergency telephone number
Emergency number : ChemTrec US: 800.424.9300 Int: +1 70 3527 3887
CHEMTREC: 1-800-424-9300

SECTION 2: Hazards identification

2.1. Classification of the substance or mixture
GHS-US classification
Acute Tox. 4 (Oral) H302
Acute Tox. 4 (Inhalation:gas) H332
Skin Corr. 1B H314
Eye Dam. 1 H318
Skin Sens. 1A H317
Repr. 2 H361
Aquatic Chronic 2 H411

2.2. Label elements
GHS-US labelling
Hazard pictograms (GHS-US) :

GHS05

GHS07

GHS08

GHS09

Signal word (GHS-US) : Danger
Hazard statements (GHS-US) : H302+H332 – Harmful if swallowed or if inhaled
H314 – Causes severe skin burns and eye damage
H317 – May cause an allergic skin reaction
H318 – Causes serious eye damage
H361 – Suspected of damaging fertility or the unborn child
H411 – Toxic to aquatic life with long lasting effects
Precautionary statements (GHS-US) : P201 – Obtain special instructions before use
P202 – Do not handle until all safety precautions have been read and understood
P260 – Do not breathe dust/fume/gas/mist/vapours/spray
P261 – Avoid breathing dust/fume/gas/mist/vapours/spray
P264 – Wash … thoroughly after handling
P270 – Do not eat, drink or smoke when using this product
P271 – Use only outdoors or in a well-ventilated area
P272 – Contaminated work clothing should not be allowed out of the workplace
P273 – Avoid release to the environment
P280 – Wear protective gloves/protective clothing/eye protection/face protection
P301+P312 – IF SWALLOWED: call a POISON CENTER or doctor/physician if you feel unwell

Clear Laminating Hardener
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations

07/13/2015 EN (English) SDS ID: 80LS-19B 2/9

P301+P330+P331 – IF SWALLOWED: rinse mouth. Do NOT induce vomiting
P302+P352 – IF ON SKIN: Wash with plenty of soap and water
P303+P361+P353 – IF ON SKIN (or hair): Remove/Take off immediately all contaminated
clothing. Rinse skin with water/shower
P304+P340 – IF INHALED: remove victim to fresh air and keep at rest in a position comfortable
for breathing
P305+P351+P338 – If in eyes: Rinse cautiously with water for several minutes. Remove contact
lenses, if present and easy to do. Continue rinsing
P308+P313 – IF exposed or concerned: Get medical advice/attention
P310 – Immediately call a POISON CENTER or doctor/physician
P312 – Call a POISON CENTER or doctor/physician if you feel unwell
P321 – Specific treatment (see … on this label)
P330 – If swallowed, rinse mouth
P333+P313 – If skin irritation or rash occurs: Get medical advice/attention
P362+P364 – Take off contaminated clothing and wash it before reuse
P363 – Wash contaminated clothing before reuse
P391 – Collect spillage
P405 – Store locked up
P501 – Dispose of contents/container to an approved waste disposal plant.

2.3. Other hazards
No additional information available
2.4. Unknown acute toxicity (GHS-US)
No data available
SECTION 3: Composition/information on ingredients

3.1. Substance
Not applicable
Full text of H-phrases: see section 16

3.2. Mixture

Name Product identifier % GHS-US classification
isophorone diamine (CAS No) 2855-13-2 < 35 Acute Tox. 4 (Oral), H302 Skin Corr. 1A, H314 1,3-bis(aminomethyl)cyclohexane (CAS No) 2579-20-6 <= 25 Acute Tox. 4 (Oral), H302 4-tert-butylphenol (CAS No) 98-54-4 < 20 Not classified benzyl alcohol (CAS No) 100-51-6 < 15 Not classified CYCLOALIPHATIC AMINE (CAS No) TRADE SECRET < 15 Skin Corr. 1C, H314 Eye Irrit. 2B, H320 Skin Sens. 1, H317 salicylic acid (CAS No) 69-72-7 < 8 Acute Tox. 4 (Oral), H302 SECTION 4: First aid measures 4.1. Description of first aid measures First-aid measures general : Never give anything by mouth to an unconscious person. IF exposed or concerned: Get medical advice/attention. First-aid measures after inhalation : Remove victim to fresh air and keep at rest in a position comfortable for breathing. Call a POISON CENTER or doctor/physician if you feel unwell. Immediately call a POISON CENTER or doctor/physician. First-aid measures after skin contact : Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower. Immediately call a POISON CENTER or doctor/physician. First-aid measures after eye contact : Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Immediately call a POISON CENTER or doctor/physician. First-aid measures after ingestion : Rinse mouth. Do NOT induce vomiting. Call a POISON CENTER or doctor/physician if you feel unwell. Immediately call a POISON CENTER or doctor/physician. 4.2. Most important symptoms and effects, both acute and delayed Symptoms/injuries : Causes severe skin burns and eye damage. Suspected of damaging fertility or the unborn child. Symptoms/injuries after inhalation : Harmful if inhaled. Danger of serious damage to health by prolonged exposure through inhalation. Symptoms/injuries after skin contact : Causes skin irritation. Caustic burns/corrosion of the skin. Symptoms/injuries after eye contact : Causes eye irritation. May cause severe irritation. Causes serious eye damage. Symptoms/injuries after ingestion : Swallowing a small quantity of this material will result in serious health hazard. Clear Laminating Hardener Safety Data Sheet according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations 07/13/2015 EN (English) SDS ID: 80LS-19B 3/9 4.3. Indication of any immediate medical attention and special treatment needed Until victim can be cared for by specialized staff: SECTION 5: Firefighting measures 5.1. Extinguishing media Suitable extinguishing media : Foam. Dry powder. Carbon dioxide. Water spray. Sand. Unsuitable extinguishing media : Do not use a heavy water stream. 5.2. Special hazards arising from the substance or mixture Fire hazard : Heating increases the fire hazard. Heating may cause a fire. Heating may cause a fire or explosion. Insufficient data available on direct fire hazard (flashpoint > 100 C). Self-heating in
large quantities; may catch fire. Temperature above flashpoint: higher fire/explosion hazard.
Reactivity : Thermal decomposition generates : Corrosive vapours.

5.3. Advice for firefighters
Firefighting instructions : Use water spray or fog for cooling exposed containers. Exercise caution when fighting any
chemical fire. Prevent fire-fighting water from entering environment.
Protection during firefighting : Do not enter fire area without proper protective equipment, including respiratory protection.
SECTION 6: Accidental release measures

6.1. Personal precautions, protective equipment and emergency procedures
6.1.1. For non-emergency personnel
Emergency procedures : Evacuate unnecessary personnel.
6.1.2. For emergency responders
Protective equipment : Equip cleanup crew with proper protection.
Emergency procedures : Ventilate area.

6.2. Environmental precautions
Prevent entry to sewers and public waters. Notify authorities if liquid enters sewers or public waters. Avoid release to the environment.

6.3. Methods and material for containment and cleaning up
Methods for cleaning up : Soak up spills with inert solids, such as clay or diatomaceous earth as soon as possible. Collect
spillage. Store away from other materials.

6.4. Reference to other sections
See Heading 8. Exposure controls and personal protection.
SECTION 7: Handling and storage

7.1. Precautions for safe handling
Precautions for safe handling : Wash hands and other exposed areas with mild soap and water before eating, drinking or
smoking and when leaving work. Provide good ventilation in process area to prevent formation of
vapour. Use only outdoors or in a well-ventilated area. Avoid breathing
dust/fume/gas/mist/vapours/spray. Do not breathe dust/fume/gas/mist/vapours/spray. Obtain
special instructions before use. Do not handle until all safety precautions have been read and
understood.
Hygiene measures : Do not eat, drink or smoke when using this product. Wash … thoroughly after handling. Wash
contaminated clothing before reuse.

7.2. Conditions for safe storage, including any incompatibilities
Technical measures : Comply with applicable regulations.
Storage conditions : Keep only in the original container in a cool, well ventilated place away from : Keep container
closed when not in use.
Incompatible products : Strong bases. Strong acids.
Incompatible materials : Sources of ignition. Direct sunlight.

7.3. Specific end use(s)
No additional information available
SECTION 8: Exposure controls/personal protection

8.1. Control parameters
No additional information available

Clear Laminating Hardener
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations

07/13/2015 EN (English) SDS ID: 80LS-19B 4/9

8.2. Exposure controls
Personal protective equipment : Avoid all unnecessary exposure.
Hand protection : Wear protective gloves.
Eye protection : Chemical goggles or face shield.
Skin and body protection : Wear suitable protective clothing.
Respiratory protection : Wear appropriate mask.
Other information : Do not eat, drink or smoke during use.
SECTION 9: Physical and chemical properties

9.1. Information on basic physical and chemical properties
Physical state : Liquid

Appearance : Clear, colorless liquid.
Colour : clear.

Odour : characteristic.

Odour threshold : No data available

pH : No data available

Relative evaporation rate (butylacetate=1) : No data available

Relative evaporation rate (ether=1) : < 1 slower than ether Melting point : No data available Freezing point : No data available Boiling point : 140 - 152 C Initial Boiling Point for Styrene @ 760.00 mm Hg Flash point : 110 C for Volatile Component (230 Deg F) Auto-ignition temperature : No data available Decomposition temperature : No data available Flammability (solid, gas) : No data available Vapour pressure : 4.3 mm Hg Relative vapour density at 20 C : No data available Relative density : No data available Density : 1.002 g/l Solubility : No data available Log Pow : No data available Log Kow : No data available Viscosity, kinematic : No data available Viscosity, dynamic : No data available Explosive properties : No data available Oxidising properties : No data available Explosive limits : No data available 9.2. Other information No additional information available SECTION 10: Stability and reactivity 10.1. Reactivity Thermal decomposition generates : Corrosive vapours. 10.2. Chemical stability Stable under normal conditions. Not established. 10.3. Possibility of hazardous reactions Not established. 10.4. Conditions to avoid Direct sunlight. Extremely high or low temperatures. 10.5. Incompatible materials Strong acids. Strong bases. Clear Laminating Hardener Safety Data Sheet according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations 07/13/2015 EN (English) SDS ID: 80LS-19B 5/9 10.6. Hazardous decomposition products fume. Carbon monoxide. Carbon dioxide. Thermal decomposition generates : Corrosive vapours. SECTION 11: Toxicological information 11.1. Information on toxicological effects Acute toxicity : Harmful if swallowed. Harmful if inhaled. Clear Laminating Hardener ( f )Mixture ATE CLP (oral) 500.000 mg/kg bodyweight ATE CLP (dermal) 1100.000 mg/kg bodyweight 1,3-bis(aminomethyl)cyclohexane (2579-20-6) LD50 oral rat 880 mg/kg (Rat) ATE CLP (oral) 880.000 mg/kg bodyweight 4-tert-butylphenol (98-54-4) LD50 oral rat 3370 mg/kg (Rat) LD50 dermal rabbit 2621 mg/kg (Rabbit) LC50 inhalation rat (mg/l) > 5.6 mg/l/4h (Rat)

isophorone diamine (2855-13-2)
LD50 oral rat 1030 mg/kg (Rat; OECD 401: Acute Oral Toxicity; Experimental value)
LD50 dermal rat > 2000 mg/kg bodyweight (Rat; Experimental value; OECD 402: Acute Dermal Toxicity)
LC50 inhalation rat (mg/l) > 5.01 mg/l/4h (Rat; Experimental value)

benzyl alcohol (100-51-6)
LD50 oral rat 1620 mg/kg bw/day (Rat; Experimental value)
LD50 dermal rabbit > 2000 mg/kg (Rabbit; Experimental value)

salicylic acid (69-72-7)
LD50 oral rat 891 mg/kg bodyweight (Rat; OECD 401: Acute Oral Toxicity; Experimental value)
LD50 dermal rat > 2000 mg/kg (Rat)
LD50 dermal rabbit > 10000 mg/kg (Rabbit)

Skin corrosion/irritation : Causes severe skin burns and eye damage.
Serious eye damage/irritation : Causes serious eye damage.
Respiratory or skin sensitisation : May cause an allergic skin reaction.
Germ cell mutagenicity : Not classified
Based on available data, the classification criteria are not met
Carcinogenicity : Not classified

Reproductive toxicity : Suspected of damaging fertility or the unborn child.
Based on available data, the classification criteria are not met
Specific target organ toxicity (single exposure) : Not classified

Specific target organ toxicity (repeated
exposure)
: Not classified
Based on available data, the classification criteria are not met

Aspiration hazard : Not classified
Based on available data, the classification criteria are not met
Potential adverse human health effects and
symptoms
: Based on available data, the classification criteria are not met. Harmful if swallowed. Harmful if
inhaled.
Symptoms/injuries after inhalation : Harmful if inhaled. Danger of serious damage to health by prolonged exposure through
inhalation.
Symptoms/injuries after skin contact : Causes skin irritation. Caustic burns/corrosion of the skin.
Symptoms/injuries after eye contact : Causes eye irritation. May cause severe irritation. Causes serious eye damage.
Symptoms/injuries after ingestion : Swallowing a small quantity of this material will result in serious health hazard.
Likely routes of exposure : Inhalation

Clear Laminating Hardener
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations

07/13/2015 EN (English) SDS ID: 80LS-19B 6/9

SECTION 12: Ecological information

12.1. Toxicity
Ecology – water : Toxic to aquatic life with long lasting effects.

1,3-bis(aminomethyl)cyclohexane (2579-20-6)
LC50 fish 1 130 mg/l (96 h; Leuciscus idus; GLP)
EC50 Daphnia 1 65.4 mg/l (48 h; Daphnia magna; GLP)
Threshold limit algae 1 56.7 mg/l (72 h; Pseudokirchneriella subcapitata; Growth rate)
Threshold limit algae 2 13.7 mg/l (72 h; Pseudokirchneriella subcapitata; Growth rate)

4-tert-butylphenol (98-54-4)
LC50 fish 1 1.6 mg/l (48 h; Leuciscus idus; Measured concentration)
EC50 Daphnia 1 3.9 mg/l (48 h; Daphnia magna)
LC50 fish 2 5.14 mg/l (96 h; Pimephales promelas)
EC50 Daphnia 2 4.8 mg/l (24 h; Daphnia magna)
Threshold limit algae 1 > 10 mg/l (Scenedesmus quadricauda)
Threshold limit algae 2 11.2 mg/l (72 h; Scenedesmus subspicatus; Growth rate)

isophorone diamine (2855-13-2)
LC50 fish 1 110 mg/l (96 h; Brachydanio rerio; GLP)
EC50 Daphnia 1 42 – 44 mg/l (24 h; Daphnia magna; GLP)
LC50 fish 2 110 mg/l (96 h; Leuciscus idus; GLP)
EC50 Daphnia 2 23 mg/l (48 h; Daphnia magna)
Threshold limit algae 1 1.5 mg/l (72 h; Scenedesmus subspicatus)
Threshold limit algae 2 10.14 mg/l (Algae)

benzyl alcohol (100-51-6)
LC50 fish 1 460 mg/l (96 h; Pimephales promelas; Nominal concentration)
EC50 Daphnia 1 400 mg/l (48 h; Daphnia magna; GLP)
LC50 fish 2 10 ppm (96 h; Lepomis macrochirus)
EC50 Daphnia 2 230 mg/l (48 h; Daphnia magna)
Threshold limit other aquatic organisms 1 < 658 mg/l (16 h; Pseudomonas putida) Threshold limit algae 1 640 ppm (96 h; Scenedesmus quadricauda) Threshold limit algae 2 2600 mg/l (72 h; Algae) salicylic acid (69-72-7) LC50 fish 1 90 mg/l (48 h; Leuciscus idus) EC50 Daphnia 1 105 - 180 mg/l (24 h; Daphnia magna; Nominal concentration) EC50 Daphnia 2 230 mg/l (24 h; Daphnia magna) Threshold limit algae 1 > 100 mg/l (72 h; Desmodesmus subspicatus)

12.2. Persistence and degradability
Clear Laminating Hardener (Mixture)
Persistence and degradability May cause long-term adverse effects in the environment.

1,3-bis(aminomethyl)cyclohexane (2579-20-6)
Persistence and degradability Not readily biodegradable in water. Biodegradability in soil: no data available. Not established.

4-tert-butylphenol (98-54-4)
Persistence and degradability Readily biodegradable in water. Photolysis in the air.
ThOD 2.77 g O /g substance

isophorone diamine (2855-13-2)
Persistence and degradability Not readily biodegradable in water. Low potential for adsorption in soil.

benzyl alcohol (100-51-6)
Persistence and degradability Readily biodegradable in water. Biodegradable in the soil. No (test)data on mobility of the
substance available.
Biochemical oxygen demand (BOD) 1.6 g O /g substance
Chemical oxygen demand (COD) 2.4 g O /g substance
ThOD 2.5 g O /g substance

Clear Laminating Hardener
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations

07/13/2015 EN (English) SDS ID: 80LS-19B 7/9

salicylic acid (69-72-7)
Persistence and degradability Readily biodegradable in water. Biodegradable in the soil.
Biochemical oxygen demand (BOD) 0.95 g O /g substance
Chemical oxygen demand (COD) 1.58 g O /g substance
ThOD 1.623 g O /g substance
BOD (% of ThOD) 0.41 – 0.60 % ThOD

CYCLOALIPHATIC AMINE (TRADE SECRET)
Persistence and degradability Not established.

12.3. Bioaccumulative potential
Clear Laminating Hardener (Mixture)
Bioaccumulative potential Not established.

1,3-bis(aminomethyl)cyclohexane (2579-20-6)
Log Pow 0.69 – 0.78 (Experimental value; OECD 107: Partition Coefficient (n-octanol/water): Shake
Flask Method; 21.5 – 24.7 C)
Bioaccumulative potential Low potential for bioaccumulation (Log Kow < 4). Not established. 4-tert-butylphenol (98-54-4) BCF fish 1 120 (3 h; Leuciscus idus) BCF fish 2 20 - 88 (Cyprinus carpio; Test duration: 8 weeks) BCF other aquatic organisms 1 34 (24 h; Chlorella sp.; Fresh weight) BCF other aquatic organisms 2 240 (5 h; Bacteria; Activated sludge) Log Pow 3.29 (OECD 107: Partition Coefficient (n-octanol/water): Shake Flask Method) Bioaccumulative potential Low potential for bioaccumulation (BCF < 500). isophorone diamine (2855-13-2) Log Pow 0.99 (Experimental value; OECD 107: Partition Coefficient (n-octanol/water): Shake Flask Method; 23 C) Bioaccumulative potential Low potential for bioaccumulation (Log Kow < 4). benzyl alcohol (100-51-6) Log Pow 1.05 (Experimental value; Other; 20 C) Bioaccumulative potential Low potential for bioaccumulation (Log Kow < 4). salicylic acid (69-72-7) BCF other aquatic organisms 1 > 1000 (96 h; Scenedesmus subspicatus)
Log Pow 2.25 (Experimental value; Equivalent or similar to OECD 117; 25 C)
Bioaccumulative potential Low potential for bioaccumulation (Log Kow < 4). CYCLOALIPHATIC AMINE (TRADE SECRET) Bioaccumulative potential Not established. 12.4. Mobility in soil benzyl alcohol (100-51-6) Surface tension 0.04 N/m (20 C) 12.5. Other adverse effects Other information : Avoid release to the environment. SECTION 13: Disposal considerations 13.1. Waste treatment methods Waste disposal recommendations : Dispose in a safe manner in accordance with local/national regulations. Dispose of contents/container to an approved waste disposal plant. Ecology - waste materials : Avoid release to the environment. SECTION 14: Transport information In accordance with DOT UN-No.(DOT) : 2735 Proper Shipping Name (DOT) : UN2735, AMINES, LIQUID, CORROSIVE, N.O.S. (CYCLOALIPHATIC AMINES ) Clear Laminating Hardener Safety Data Sheet according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations 07/13/2015 EN (English) SDS ID: 80LS-19B 8/9 Hazard Classes (DOT) : 8 - Class 8 - Corrosive material 49 CFR 173.136 Packing group (DOT) : II - Medium Danger Additional information Other information : No supplementary information available. Transport by sea UN-No.(IMDG) : 2735 Proper Shipping Name (IMDG) : UN2735, AMINES, LIQUID, CORROSIVE, N.O.S. (CYCLOALIPHATIC AMINES ) Hazard Classes (IMDG) : 8 - Class 8 - Corrosive material 49 CFR 173.136 Packing group (IMDG) : II - Medium Danger Air transport UN-No.(IATA) : 2735 Proper Shipping Name (IATA) : UN2735, AMINES, LIQUID, CORROSIVE, N.O.S. (CYCLOALIPHATIC AMINES ) Hazard Classes (IATA) : 8 - Class 8 - Corrosive material 49 CFR 173.136 Packing group (IATA) : II - Medium Danger SECTION 15: Regulatory information 15.1. US Federal regulations Clear Laminating Hardener (Mixture) SARA Section 311/312 Hazard Classes Delayed (chronic) health hazard 15.2. International regulations CANADA No additional information available EU-Regulations No additional information available Classification according to Regulation (EC) No. 1272/2008 [CLP] Acute Tox. 4 (Oral) H302 Acute Tox. 4 (Dermal) H312 Skin Corr. 1B H314 Skin Sens. 1 H317 Aquatic Chronic 3 H412 Full text of H-phrases: see section 16 Classification according to Directive 67/548/EEC [DSD] or 1999/45/EC [DPD] Xn; R21/22 C; R34 R43 R52/53 Full text of R-phrases: see section 16 15.2.2. National regulations No additional information available 15.3. US State regulations No additional information available Clear Laminating Hardener Safety Data Sheet according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations 07/13/2015 EN (English) SDS ID: 80LS-19B 9/9 SECTION 16: Other information Other information : None. Full text of H-phrases: see section 16: ------ Acute Tox. 4 (Inhalation:gas) Acute toxicity (inhalation:gas) Category 4 ------ Acute Tox. 4 (Oral) Acute toxicity (oral), Category 4 ------ Aquatic Chronic 2 Hazardous to the aquatic environment Chronic Hazard, Category 2 ------ Eye Dam. 1 Serious eye damage/eye irritation, Category 1 ------ Eye Irrit. 2B Serious eye damage/eye irritation, Category 2B ------ Repr. 2 Reproductive toxicity, Category 2 ------ Skin Corr. 1A Skin corrosion/irritation, Category 1A ------ Skin Corr. 1B Skin corrosion/irritation, Category 1B ------ Skin Corr. 1C Skin corrosion/irritation, Category 1C ------ Skin Sens. 1 Sensitisation Skin, category 1 ------ Skin Sens. 1A Sensitisation Skin, category 1A ------ H302 Harmful if swallowed ------ H314 Causes severe skin burns and eye damage ------ H317 May cause an allergic skin reaction ------ H318 Causes serious eye damage ------ H320 Causes eye irritation ------ H332 Harmful if inhaled ------ H361 Suspected of damaging fertility or the unborn child ------ H411 Toxic to aquatic life with long lasting effects SDS US (GHS HazCom 2012) To the best of our knowledge this SDS is accurate. The the extent allowed by law, this statement is made in lieu of an other warranties, expressed or implied including but not limited to any implied warranty of merchantability or fitness for a particular purpose and is in lieu of any other obligations or liability on the part of Dura Technoligies, Inc.

80LS-19A-G_SDS.pdf

by | Sep 27, 2025

EPOXY LAMINATING RESIN
Safety Data Sheet 80LS-19A
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
Date of issue: 07/13/2015 Revision date: 07/13/2015 Version: 1.0

07/13/2015 EN (English) SDS ID: 80LS-19A Page 1

SECTION 1: Identification of the substance/mixture and of the company/undertaking

1.1. Product identifier
Product form : Mixture
Trade name : EPOXY LAMINATING RESIN
CAS No : Mixture
Product code : 80LS-19A
Formula : mixture
Other means of identification : DISTRIBUTED BY REVCHEM COMPOSITES, INC

1.2. Relevant identified uses of the substance or mixture and uses advised against
Use of the substance/mixture : EPOXY LAMINATING RESIN

1.3. Details of the supplier of the safety data sheet
Dura Technologies, Inc.
2720 South Willow Avenue #A
Bloomington, CA 92316

909.877.8477
ChemTrec US: 800.424.9300
ChemTrec Int: +1 70 3527 3887

1.4. Emergency telephone number
Emergency number : ChemTrec US: 800.424.9300 Int: +1 70 3527 3887
CHEMTREC: 1-800-424-9300

SECTION 2: Hazards identification

2.1. Classification of the substance or mixture
GHS-US classification
Skin Irrit. 2 H315
Eye Irrit. 2A H319
Eye Irrit. 2B H320
Skin Sens. 1 H317
STOT SE 3 H335
STOT RE 1 H372
Aquatic Chronic 2 H411

2.2. Label elements
GHS-US labelling
Hazard pictograms (GHS-US) :

GHS07

GHS08

GHS09

Signal word (GHS-US) : Danger
Hazard statements (GHS-US) : H315 – Causes skin irritation
H317 – May cause an allergic skin reaction
H319 – Causes serious eye irritation
H320 – Causes eye irritation
H335 – May cause respiratory irritation
H372 – Causes damage to organs through prolonged or repeated exposure
H411 – Toxic to aquatic life with long lasting effects
Precautionary statements (GHS-US) : P260 – Do not breathe dust/fume/gas/mist/vapours/spray
P261 – Avoid breathing dust/fume/gas/mist/vapours/spray
P264 – Wash … thoroughly after handling
P270 – Do not eat, drink or smoke when using this product
P271 – Use only outdoors or in a well-ventilated area
P272 – Contaminated work clothing should not be allowed out of the workplace
P273 – Avoid release to the environment
P280 – Wear protective gloves/protective clothing/eye protection/face protection

EPOXY LAMINATING RESIN
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations

07/13/2015 EN (English) SDS ID: 80LS-19A 2/8

P302+P352 – IF ON SKIN: Wash with plenty of soap and water
P304+P340 – IF INHALED: remove victim to fresh air and keep at rest in a position comfortable
for breathing
P305+P351+P338 – If in eyes: Rinse cautiously with water for several minutes. Remove contact
lenses, if present and easy to do. Continue rinsing
P312 – Call a POISON CENTER or doctor/physician if you feel unwell
P314 – Get medical advice and attention if you feel unwell
P321 – Specific treatment (see … on this label)
P332+P313 – If skin irritation occurs: Get medical advice/attention
P333+P313 – If skin irritation or rash occurs: Get medical advice/attention
P337+P313 – If eye irritation persists: Get medical advice/attention
P362 – Take off contaminated clothing and wash before reuse
P362+P364 – Take off contaminated clothing and wash it before reuse
P391 – Collect spillage
P403+P233 – Store in a well-ventilated place. Keep container tightly closed
P405 – Store locked up
P501 – Dispose of contents/container to an approved waste disposal plant.

2.3. Other hazards
No additional information available
2.4. Unknown acute toxicity (GHS-US)
No data available
SECTION 3: Composition/information on ingredients

3.1. Substance
Not applicable
Full text of H-phrases: see section 16

3.2. Mixture

Name Product identifier % GHS-US classification
epoxy resins,liquids, MM<=700 (CAS No) 25068-38-6 <= 80 Not classified butanedioldiglycidyl ether (CAS No) 2425-79-8 < 15 Acute Tox. 4 (Dermal), H312 Skin Irrit. 2, H315 Eye Irrit. 2A, H319 Skin Sens. 1, H317 trimethylolpropane triacrylate,stabilized (CAS No) 15625-89-5 <= 10 Not classified poly(propylene glycol) diglycidyl ether, average MW=380 (CAS No) 26142-30-3 < 6 Not classified SECTION 4: First aid measures 4.1. Description of first aid measures First-aid measures general : Never give anything by mouth to an unconscious person. If you feel unwell, seek medical advice (show the label where possible). First-aid measures after inhalation : Remove victim to fresh air and keep at rest in a position comfortable for breathing. Call a POISON CENTER or doctor/physician if you feel unwell. First-aid measures after skin contact : Wash with plenty of soap and water. Wash contaminated clothing before reuse. If skin irritation occurs: Get medical advice/attention. Specific treatment (see ... on this label). If skin irritation or rash occurs: First-aid measures after eye contact : Rinse cautiously with water for several minutes. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical advice/attention. First-aid measures after ingestion : Rinse mouth. Do NOT induce vomiting. Obtain emergency medical attention. 4.2. Most important symptoms and effects, both acute and delayed Symptoms/injuries : Causes damage to organs through prolonged or repeated exposure. Symptoms/injuries after inhalation : May cause an allergic skin reaction. May cause respiratory irritation. Symptoms/injuries after skin contact : Causes skin irritation. Symptoms/injuries after eye contact : Causes eye irritation. Causes serious eye irritation. 4.3. Indication of any immediate medical attention and special treatment needed Until victim can be cared for by specialized staff: SECTION 5: Firefighting measures 5.1. Extinguishing media Suitable extinguishing media : Foam. Dry powder. Carbon dioxide. Water spray. Sand. EPOXY LAMINATING RESIN Safety Data Sheet according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations 07/13/2015 EN (English) SDS ID: 80LS-19A 3/8 Unsuitable extinguishing media : Do not use a heavy water stream. 5.2. Special hazards arising from the substance or mixture Fire hazard : Heating increases the fire hazard. Heating may cause a fire. Heating may cause a fire or explosion. Insufficient data available on direct fire hazard (flashpoint > 100 C). Self-heating in
large quantities; may catch fire. Temperature above flashpoint: higher fire/explosion hazard.

5.3. Advice for firefighters
Firefighting instructions : Use water spray or fog for cooling exposed containers. Exercise caution when fighting any
chemical fire. Prevent fire-fighting water from entering environment.
Protection during firefighting : Do not enter fire area without proper protective equipment, including respiratory protection.
SECTION 6: Accidental release measures

6.1. Personal precautions, protective equipment and emergency procedures
6.1.1. For non-emergency personnel
Emergency procedures : Evacuate unnecessary personnel.
6.1.2. For emergency responders
Protective equipment : Equip cleanup crew with proper protection.
Emergency procedures : Ventilate area.

6.2. Environmental precautions
Prevent entry to sewers and public waters. Notify authorities if liquid enters sewers or public waters. Avoid release to the environment.

6.3. Methods and material for containment and cleaning up
For containment : Dam up the liquid spill.
Methods for cleaning up : Soak up spills with inert solids, such as clay or diatomaceous earth as soon as possible. Collect
spillage. Store away from other materials.

6.4. Reference to other sections
See Heading 8. Exposure controls and personal protection.
SECTION 7: Handling and storage

7.1. Precautions for safe handling
Precautions for safe handling : Wash hands and other exposed areas with mild soap and water before eating, drinking or
smoking and when leaving work. Provide good ventilation in process area to prevent formation of
vapour. Avoid breathing dust/fume/gas/mist/vapours/spray. Use only outdoors or in a well-
ventilated area. Do not breathe dust/fume/gas/mist/vapours/spray.
Hygiene measures : Wash hands and other exposed areas with mild soap and water before eat, drink or smoke and
when leaving work. Wash … thoroughly after handling. Contaminated work clothing should not be
allowed out of the workplace. Wash contaminated clothing before reuse. Do not eat, drink or
smoke when using this product.

7.2. Conditions for safe storage, including any incompatibilities
Storage conditions : Keep only in the original container in a cool, well ventilated place away from : Keep container
tightly closed.
Incompatible products : Strong bases. Strong acids.
Incompatible materials : Sources of ignition. Direct sunlight.
Storage temperature : 2 – 40 C

7.3. Specific end use(s)
No additional information available
SECTION 8: Exposure controls/personal protection

8.1. Control parameters
No additional information available

8.2. Exposure controls
Personal protective equipment : Avoid all unnecessary exposure.
Materials for protective clothing : GIVE GOOD RESISTANCE: rubber.
Hand protection : Wear protective gloves.
Eye protection : Chemical goggles or safety glasses.
Skin and body protection : Wear suitable protective clothing.

EPOXY LAMINATING RESIN
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations

07/13/2015 EN (English) SDS ID: 80LS-19A 4/8

Respiratory protection : Wear appropriate mask.
Other information : Do not eat, drink or smoke during use.
SECTION 9: Physical and chemical properties

9.1. Information on basic physical and chemical properties
Physical state : Liquid

Appearance : Liquid.
Colour : Colourless.

Odour : slight. characteristic.

Odour threshold : No data available

pH : No data available

Relative evaporation rate (butylacetate=1) : No data available

Relative evaporation rate (ether=1) : < 1 slower than ether Melting point : N/A Freezing point : No data available Boiling point : > 200 C

Flash point : > 100 C

Auto-ignition temperature : No data available

Decomposition temperature : No data available

Flammability (solid, gas) : No data available

Vapour pressure : < 2 mm Hg Relative vapour density at 20 C : No data available Relative density : No data available Density : 1.13 g/l Solubility : Insoluble in water. Log Pow : No data available Log Kow : No data available Viscosity, kinematic : No data available Viscosity, dynamic : No data available Explosive properties : No data available Oxidising properties : No data available Explosive limits : No data available 9.2. Other information No additional information available SECTION 10: Stability and reactivity 10.1. Reactivity No additional information available 10.2. Chemical stability Combustible liquid. Not established. 10.3. Possibility of hazardous reactions Not established. 10.4. Conditions to avoid Open flame. Direct sunlight. Extremely high or low temperatures. 10.5. Incompatible materials Strong acids. Strong bases. 10.6. Hazardous decomposition products fume. Carbon monoxide. Carbon dioxide. SECTION 11: Toxicological information 11.1. Information on toxicological effects EPOXY LAMINATING RESIN Safety Data Sheet according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations 07/13/2015 EN (English) SDS ID: 80LS-19A 5/8 Acute toxicity : Not classified (Lack of data) trimethylolpropane triacrylate,stabilized (15625-89-5) LD50 oral rat 5190 mg/kg (Rat) LD50 dermal rabbit 5170 mg/kg (Rabbit) ATE CLP (oral) 5190.000 mg/kg bodyweight ATE CLP (dermal) 5170.000 mg/kg bodyweight epoxy resins,liquids, MM<=700 (25068-38-6) LD50 oral rat > 2000 mg/kg (Rat)
LD50 dermal rabbit > 2000 mg/kg (Rabbit)

butanedioldiglycidyl ether (2425-79-8)
LD50 oral rat 2980 mg/kg (Rat)
LD50 dermal rabbit 1130 mg/kg (Rabbit)
ATE CLP (oral) 2980.000 mg/kg bodyweight
ATE CLP (dermal) 1130.000 mg/kg bodyweight
ATE CLP (dust,mist) 1.500 mg/l/4h

Skin corrosion/irritation : Causes skin irritation.
Serious eye damage/irritation : Causes serious eye irritation. Causes eye irritation.
Respiratory or skin sensitisation : May cause an allergic skin reaction.
Germ cell mutagenicity : Not classified
Based on available data, the classification criteria are not met
Carcinogenicity : Not classified

Reproductive toxicity : Not classified
Based on available data, the classification criteria are not met
Specific target organ toxicity (single exposure) : May cause respiratory irritation.

Specific target organ toxicity (repeated
exposure)
: Causes damage to organs through prolonged or repeated exposure.
Based on available data, the classification criteria are not met
Causes damage to organs through prolonged or repeated exposure

Aspiration hazard : Not classified
Based on available data, the classification criteria are not met
Potential adverse human health effects and
symptoms
: Based on available data, the classification criteria are not met.
Symptoms/injuries after inhalation : May cause an allergic skin reaction. May cause respiratory irritation.
Symptoms/injuries after skin contact : Causes skin irritation.
Symptoms/injuries after eye contact : Causes eye irritation. Causes serious eye irritation.
Likely routes of exposure : Inhalation
SECTION 12: Ecological information

12.1. Toxicity
Ecology – water : Toxic to aquatic life with long lasting effects.

trimethylolpropane triacrylate,stabilized (15625-89-5)
LC50 fish 1 28.6 mg/l (Salmo gairdneri (Oncorhynchus mykiss); Stabilizer)
EC50 Daphnia 1 19 mg/l (24 h; Daphnia magna; Stabilizer)
LC50 fish 2 33 mg/l (Leuciscus idus; Stabilizer)

epoxy resins,liquids, MM<=700 (25068-38-6) LC50 fish 1 1 - 10 mg/l (Salmo gairdneri / Oncorhynchus mykiss) EC50 Daphnia 1 1 - 10 mg/l (Invertebrata) EC50 other aquatic organisms 1 > 100 mg/l (Activated sludge; Estimated value)
EC50 Daphnia 2 2.7 mg/l (Daphnia magna)

butanedioldiglycidyl ether (2425-79-8)
LC50 fish 1 202393 mg/l (96 h; Pisces)

EPOXY LAMINATING RESIN
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations

07/13/2015 EN (English) SDS ID: 80LS-19A 6/8

butanedioldiglycidyl ether (2425-79-8)
Threshold limit algae 1 88930 mg/l (96 h; Algae)

12.2. Persistence and degradability
EPOXY LAMINATING RESIN (Mixture)
Persistence and degradability May cause long-term adverse effects in the environment.

trimethylolpropane triacrylate,stabilized (15625-89-5)
Persistence and degradability Biodegradability in water: no data available.
ThOD 1.835 g O /g substance

epoxy resins,liquids, MM<=700 (25068-38-6) Persistence and degradability Not readily biodegradable in water. butanedioldiglycidyl ether (2425-79-8) Persistence and degradability Not readily biodegradable in water. poly(propylene glycol) diglycidyl ether, average MW=380 (26142-30-3) Persistence and degradability Biodegradability in water: no data available. 12.3. Bioaccumulative potential EPOXY LAMINATING RESIN (Mixture) Bioaccumulative potential Not established. trimethylolpropane triacrylate,stabilized (15625-89-5) Bioaccumulative potential No bioaccumulation data available. epoxy resins,liquids, MM<=700 (25068-38-6) Log Pow > 3
Bioaccumulative potential According to literature: bioaccumulative.

butanedioldiglycidyl ether (2425-79-8)
Log Pow -0.15
Bioaccumulative potential Bioaccumulation: not applicable.

poly(propylene glycol) diglycidyl ether, average MW=380 (26142-30-3)
Bioaccumulative potential No bioaccumulation data available.

12.4. Mobility in soil
No additional information available

12.5. Other adverse effects
Other information : Avoid release to the environment.
SECTION 13: Disposal considerations

13.1. Waste treatment methods
Waste disposal recommendations : Dispose in a safe manner in accordance with local/national regulations. Dispose of
contents/container to an approved waste disposal plant.
Ecology – waste materials : Avoid release to the environment.
SECTION 14: Transport information

In accordance with DOT
Not regulated for transport
Additional information
Other information : No supplementary information available.

ADR
Transport document description :
Transport by sea
UN-No.( IMDG) : 3082
Proper Shipping Name (IMDG) : Environmently Hazarous substance (AQUATIC ENVIRONMENT), Liquid,N.O.S.(Epoxy Resin)

EPOXY LAMINATING RESIN
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations

07/13/2015 EN (English) SDS ID: 80LS-19A 7/8

Hazard Classes (IMDG) : 9
Packing group (IMDG) : III – Minor Danger

Air transport
UN-No.(IATA) : 3082
Proper Shipping Name (IATA) : Environmently Hazarous substance (AQUATIC ENVIRONMENT), Liquid,N.O.S.(Epoxy Resin)
Hazard Classes (IATA) : 9
Packing group (IATA) : III – Minor Danger

SECTION 15: Regulatory information

15.1. US Federal regulations
No additional information available

15.2. International regulations
CANADA
No additional information available

EU-Regulations
No additional information available

Classification according to Regulation (EC) No. 1272/2008 [CLP]
Skin Irrit. 2 H315
Eye Irrit. 2 H319
Skin Sens. 1 H317
Aquatic Chronic 2 H411

Full text of H-phrases: see section 16

Classification according to Directive 67/548/EEC [DSD] or 1999/45/EC [DPD]
Xi; R36/38
R43
N; R51/53
Full text of R-phrases: see section 16
15.2.2. National regulations
No additional information available

15.3. US State regulations
No additional information available

SECTION 16: Other information

Other information : None.

Full text of H-phrases: see section 16:
—— Acute Tox. 4 (Dermal) Acute toxicity (dermal), Category 4
—— Aquatic Chronic 2 Hazardous to the aquatic environment Chronic Hazard, Category
2
—— Eye Irrit. 2A Serious eye damage/eye irritation, Category 2A
—— Eye Irrit. 2B Serious eye damage/eye irritation, Category 2B
—— Skin Irrit. 2 Skin corrosion/irritation, Category 2
—— Skin Sens. 1 Sensitisation Skin, category 1

EPOXY LAMINATING RESIN
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations

07/13/2015 EN (English) SDS ID: 80LS-19A 8/8

—— STOT RE 1 Specific target organ toxicity Repeated exposure, Category 1
—— STOT SE 3 Specific target organ toxicity Single exposure, Category 3,
Respiratory tract irritation
—— H312 Harmful in contact with skin
—— H315 Causes skin irritation
—— H317 May cause an allergic skin reaction
—— H319 Causes serious eye irritation
—— H320 Causes eye irritation
—— H335 May cause respiratory irritation
—— H372 Causes damage to organs through prolonged or repeated exposure
—— H411 Toxic to aquatic life with long lasting effects

NFPA health hazard : 1 – Exposure could cause irritation but only minor residual
injury even if no treatment is given.

NFPA fire hazard : 1 – Must be preheated before ignition can occur.
NFPA reactivity : 1 – Normally stable, but can become unstable at elevated
temperatures and pressures or may react with water with
some release of energy, but not violently.

HMIS III Rating

Health : 1 Slight Hazard – Irritation or minor reversible injury possible
Flammability : 1 Slight Hazard
Physical : 1 Slight Hazard
Personal Protection : H

SDS US (GHS HazCom 2012)

To the best of our knowledge this SDS is accurate. The the extent allowed by law, this statement is made in lieu of an other warranties, expressed or implied including but not limited to any implied
warranty of merchantability or fitness for a particular purpose and is in lieu of any other obligations or liability on the part of Dura Technoligies, Inc.

80LS-19A-F_SDS.pdf