TECHNICAL DATA SHEE T
STRETCH- VAC 350
VACUUM BAGGING FILM
Aerovac
955-10 National Parkway
Schaumburg, IL 60 173
USA
TDS SV350_0 2.21_Issue1
STRETCH- VAC
350
Vacuum bagging film
Ideally suited to complex tooling geometry
Features and Benefits
Highly conformable, transparent, co-polymer film
which will remain soft and pliable during cures up to
177 C (350 F).
Suitable for use with complex tooling geometry.
Must be used with suitable high tack sealant tape.
Not recommended for use with polyester or vinylester
resin systems
PROPERTIES
Maximum use temperature 177 C 350 F
Color Clear
Tensile strength at break (ASTM D882) 60MPa 8800PSI
Elongation at break (ASTM D882) 800%
Yield 11.45m /kg 56yd /lb
AVAILABILITY
Thickness 75 m 0.003in
Roll weight Up to 30kg Up to 66lbs
Widths Up to 3.66m (open) Up to 144in (open)
Formats available Sheet and V sheet
STORAGE
Do not store rolls vertically on their ends.
HEALTH & SAFETY
Please refer to the product MSDS for safe handling, personal protective equipment recommendations and disposal
considerations.
DISCLAIMER: The data and information provided in this document have been obtained from carefully controlled samples and are considered to be
representative of the product described. Aerovac does not express or imply any guarantee or warranty of any kind including, but not limited to, the accuracy, the
completeness or the relevance of the data and information set out herein. Because the properties of this product can be significantly affected by the fabrication
and testing techniques employed, and since Aerovac does not control the conditions under which its products are tested and used, Aerovac cannot guarantee
the properties provided will be obtained with other processes and equipment. No guarantee or warranty is provided if the product is adapted for a s pecific use or
purpose. Aerovac declines any liability with respect to the use made by any third party of the data and information contained herein. Aerovac has the right to
change any data or information when deemed appropriate. All trademarks are the property of their respective owners. 2021 , Aerovac. All rights reserved.