0856199-60A_TDS.pdf

Product Information
VALUE PLY
VP 103
Style: 56199
Polyester Peel/Release Ply
VP 103, Style 56199 is designed for vacuum bag lay-up composites and metal-to-metal bonding structures.
The 100% polyester fiber melts at approximately 480 F (249 C) and is resistant to phenolic resin system deg-
radation. The fabric leaves a rough surface impression for priming and secondary bonding. It is available in
precision slit widths of 58 inches or less.
Style 56199 is available in:
F
IN 060 NAT Scoured and Heat-Set finish
FIN 068 SRL Super Release Lavender /an inert, heat stabilized, cross-linked polymer finish
The data above represents typical values for this fabric. A specification for this product has not yet been established.
For More Information, Please Contact Us:
Precision Fabrics Group, Inc.
301 North Elm Street, Suite 600
Greensboro, NC 27401
www.precisionfabrics.com
JKH 11/01/06
Physical Properties
US Metric Test Method
Width 60 in 152.4 cm ASTM-D-3774
Length 200 yd 182.9 m
Weight 3.15 oz/yd
2
106.8 g/m
2
ASTM-D-3776
Finished Count ASTM-D-3775
Warp 57 ends/in 22.4 ends/cm
Fill 35 picks/in 13.8 picks/cm
Thickness 0.006 – 0.0075 in 0.15 0.19 mm ASTM-D-1777
Tensile Strength (Grab) ASTM-D-5034
Warp 170 lb min 756.5 N
Fill 140 lb min 623.0 N
pH 4.0-8.0 AATCC-81
E
xtractable Materials 0.5% (max) ASTM-D-2257
Petroleum Ether Method