08703601A_TDS.pdf

INTERNATIONAL INC. TECHNICAL INFORMATION
Section Guide
Catalog position : Technical information
As the conditions or methods of use, including storage, are beyond our control, Airtech International, Inc. does not assume any responsibility for the performance of his material for any particular use. The material is sold “as is”.
Airtech International, Inc. disclaims, and buyer waives, any and all implied warranties, including without limitation the implied warranties of merchantability and of fitness for particular use. The information contained herein
represents typical properties and should not be used for specification purposes. Any translation is provided for your convenience only. The official language is English and the official law is California, USA.
Description Page
Common product selections 1
Product selection guide for different cure temperatures 4
Vacuum bagging techniques 8
Tooling prepreg selection guide 14
Tooling resin product selection guide 16
5700 Skylab Road
Huntington Beach
CA 92647 USA
Phone : +1 714-899-8100
Fax : +1 714-899-8179
E-mail : airtech@airtech.com
Website : www.airtech.com

INTERNATIONAL INC. COMMON PRODUCT SELECTIONS
5700 Skylab Road
Huntington Beach
CA 92647 USA
Phone : +1 714-899-8100
Fax : +1 714-899-8179
E-mail : airtech@airtech.com
Website : www.airtech.com
Last updated : 2015-07-09
Catalog position : Technical information
As the conditions or methods of use, including storage, are beyond our control, Airtech International, Inc. does not assume any responsibility for the performance of his material for any particular use. The material is sold “as is”.
Airtech International, Inc. disclaims, and buyer waives, any and all implied warranties, including without limitation the implied warranties of merchantability and of fitness for particular use. The information contained herein
represents typical properties and should not be used for specification purposes. Any translation is provided for your convenience only. The official language is English and the official law is California, USA.
COMMON PRODUCT SELECTIONS < 400 F (202 C) P. 2 INTERNATIONAL INC. COMMON PRODUCT SELECTIONS 5700 Skylab Road Huntington Beach CA 92647 USA Phone : +1 714-899-8100 Fax : +1 714-899-8179 E-mail : airtech@airtech.com Website : www.airtech.com Last updated : 2015-07-09 Catalog position : Technical information As the conditions or methods of use, including storage, are beyond our control, Airtech International, Inc. does not assume any responsibility for the performance of his material for any particular use. The material is sold "as is". Airtech International, Inc. disclaims, and buyer waives, any and all implied warranties, including without limitation the implied warranties of merchantability and of fitness for particular use. The information contained herein represents typical properties and should not be used for specification purposes. Any translation is provided for your convenience only. The official language is English and the official law is California, USA. COMMON PRODUCT SELECTIONS > 400 F (202 C)
P. 3

INTERNATIONAL INC. PRODUCT SELECTION GUIDE FOR DIFFERENT CURE TEMPERATURES
5700 Skylab Road
Huntington Beach
CA 92647 USA
Phone : +1 714-899-8100
Fax : +1 714-899-8179
E-mail : airtech@airtech.com
Website : www.airtech.com
Last updated : 2018-09-13
Catalog position : Technical information
As the conditions or methods of use, including storage, are beyond our control, Airtech International, Inc. does not assume any responsibility for the performance of his material for any particular use. The material is sold “as is”.
Airtech International, Inc. disclaims, and buyer waives, any and all implied warranties, including without limitation the implied warranties of merchantability and of fitness for particular use. The information contained herein
represents typical properties and should not be used for specification purposes. Any translation is provided for your convenience only. The official language is English and the official law is California, USA.
ROOM TEMPERATURE
Airtech catalog section Airtech products
Bagging films
Econolon, Wrightlon 5400, Dahlar Release Bag 125, Stretchlon 200,
Securlon L1000, Big Blue L-100, Securlon L-500Y
Release films Dahlar Release Bag 125
Pressure sensitive tapes
Flashbreaker 1, 2, 5, 1(HT), 2R, 5R,
Flashbreaker 1R(HT), 2R(HT), Airhold 1 CBS, Airhold 10 CBS
Flashbreaker 2 CBS, Wrightlease 2, Toolwright 3 & 5
Mold releases (non-liquid)
Filmcote 1524, Toolwright 3, Toolwright 5, Tooltec A005, Tooltec A007,
Tooltec A012, Tooltec CA5, Tooltec CS5
Release fabrics / Peel plies
Econoply J, Econoply E, Econostitch , Econolease, Econostitch G
Release Ply A, B, F, G
Resin infusion mesh Resinflow 60
Breathers and bleeders All Airweave and Econoweave products
Vacuum bag sealant tapes GS-95, GS-100, AT-199, AT-200Y, Airseal 2
Vacuum valves and hoses
Vac Valve 401C or Vac Valve 399, Econoflow 59R hose,
AQD 500TF quick disconnect
Resin infusion products
Toolfusion 1A/1B, Toolfusion 3, Infusioncoat 1A/1B, Resinflow 60,
Greenflow 75, Resinflow 90 HT, polyethylene tubing, polyethylene spiral tubing,
NTF-nylon barb “T” fittings, NEF-nylon bar elbow fittings, NCF-nylon barb
coupling fittings, RB451, OF 313, 500, 750, 1000, OF 625V and OF750V,
resin line clamps, resin infusion connectors
250 F (121 C)
Airtech catalog section Airtech products
Bagging films
Securlon L-500Y, Big Blue L-100, Stretchlon 200, Stretchlon HT-350,
Stretchlon 700, Wrightlon 5400, 6400, 7400, Dahlar Release Bag 125
Release films Wrightlon 3900, Wrightlon 4600, Wrightlon 5200, Dahlar Release Bag 125
Pressure sensitive tapes
Flashbreaker 1, 2, 5, 1R, 2R, 5R,
Flashbreaker 1R (HT), 2R(HT), Wrightcast 8500 PS,
Flashbreaker 2 CBS, Wrightlease 2, Toolwright 3 & 5
Mold releases (non-liquid)
Filmcote 1524, Toolwright 3, Toolwright 5, Tooltec A005, Tooltec A007,
Tooltec A012, Tooltec CA5, Tooltec CS5
Release fabrics / Peel plies
Econoply E, Econoply J, Econostitch , Econolease, Econostitch G,
Release Ply A, B, C, F, G (structural bonding),
Bleeder Lease A, B, G (non-structural bonding)
Breathers & Bleeders All Airweave and Econoweave products
Vacuum bag sealant tapes AT-200Y, GS-100, GS-213, AT-199, Airseal 2
Vacuum valves and hoses
Vac Valve 401, 401A and 401C, Vac Valve 399, Vac Valve 402A, Airflow 65R hose,
Econoflow 59 hose, AQD 500TF quick disconnect
Resin infusion products
Greenflow 75, Resinflow 90 HT, polyethylene tubing, polyethylene spiral tubing,
Toolfusion 1A/1B, Toolfusion 3, Infusioncoat 1A/1B, NTF-nylon barb
“T” fittings, NEF-nylon bar elbow fittings, NCF-nylon barb coupling fittings,
RB451,OF 313, 500, 750, 1000, OF 625V and OF750V, resin line clamps,
resin infusion connectors
P. 4

INTERNATIONAL INC. PRODUCT SELECTION GUIDE FOR DIFFERENT CURE TEMPERATURES
5700 Skylab Road
Huntington Beach
CA 92647 USA
Phone : +1 714-899-8100
Fax : +1 714-899-8179
E-mail : airtech@airtech.com
Website : www.airtech.com
Last updated : 2018-09-13
Catalog position : Technical information
As the conditions or methods of use, including storage, are beyond our control, Airtech International, Inc. does not assume any responsibility for the performance of his material for any particular use. The material is sold “as is”.
Airtech International, Inc. disclaims, and buyer waives, any and all implied warranties, including without limitation the implied warranties of merchantability and of fitness for particular use. The information contained herein
represents typical properties and should not be used for specification purposes. Any translation is provided for your convenience only. The official language is English and the official law is California, USA.
350 F (177 C)
Airtech catalog section Airtech products
Bagging films
Stretchlon 700, Stretchlon 800, Stretchlon 850, Wrightlon 5400,
Wrightlon 6400, Wrightlon 7400, Ipplon KM1300, Securlon L-1000
Release films Wrightlon 4600, Wrightlon 5200, A4000, Airtech MR 1
Pressure sensitive tapes
Flashbreaker 1, 2, 5, 1R, 2R, 5R, Flashbreaker 1(HT), 2R(HT),
Wrightcast 8500 PS,Teflease MG2, Airhold 1 CBS, Flashbreaker 2 CBS
Mold releases (non-liquid)
Filmcote 1524, Toolwright 3, Toolwright 5, Tooltec A005, Tooltec A007,
Tooltec A012, Tooltec CA5, Tooltec CS5
Release fabrics / Peel plies
Release Ply A, B, C, F, G, Release Ply Super A,
Super F (structural bonding),
Bleeder Lease A, B or G (non structural bonding),
Release Ease 234 TFP, Release Ease 234 TFNP
Breathers & Bleeders All Airweave or Ultraweave products
Vacuum bag sealant tapes AT-200Y, GS-100, GS-213, GS-43MR
Vacuum valves and hoses
Vac Valve 401, 401A, and 401C, Vac Valve 399 or Vac Valve 402A,
Airflow 65R hose, AQD 500TF quick disconnect
Resin infusion products
Toolfusion 1, Resinflow 90 HT, NTF-nylon barb “T” fittings,
NEF-nylon bar elbow fittings, NCF-nylon barb coupling flittings,
resin line clamps, Toolfusion 3
390 F (199 C)
Airtech catalog section Airtech products
Bagging films
Stretchlon 800, Stretchlon 850, Wrightlon 7400,
Ipplon KM1300, Ipplon DP1000, Securlon L-1000,
Securlon L-2000, Airtech MR 1
Release films Wrightlon 4600, Wrightlon 5200, A4000, Airtech MR 1
Pressure sensitive tapes
Flashbreaker 1, 2, 5, 1R, 2R, 5R, Flashbreaker 2R(HT), Wrightcast 8500 PS,
Teflease MG2, Airhold 1 CBS, Flashbreaker 2CBS, Wrightlease 2,
Toolwright 3 & 5
Mold releases (non-liquid)
Filmcote 1524, Toolwright 3, Toolwright 5, Tooltec A005, Tooltec A007,
Tooltec A012, Tooltec CA5, Tooltec CS5
Release fabrics / Peel plies
Release Ply A, B, C, F, G, Super A, Super F (structural bonding),
Bleeder Lease A, B or G (non structural bonding),
Release Ease 234 TFP, Release Ease 234 TFNP
Breathers & Bleeders All Airweave or Ultraweave products
Vacuum bag sealant tapes AT-200Y, GS-213, GS-213-3 or GS-43MR
Vacuum valves and hoses
Vac Valve 401, Vac Valve 402 & 402A, Premium Multi-Valve 407
Airflow 65R, Airflow 100R hose, AQD 500TF or Airlock 450TF quick disconnect
Resin infusion products Toolfusion 3, Toolfusion 1A/1B
P. 5

INTERNATIONAL INC. PRODUCT SELECTION GUIDE FOR DIFFERENT CURE TEMPERATURES
5700 Skylab Road
Huntington Beach
CA 92647 USA
Phone : +1 714-899-8100
Fax : +1 714-899-8179
E-mail : airtech@airtech.com
Website : www.airtech.com
Last updated : 2018-09-13
Catalog position : Technical information
As the conditions or methods of use, including storage, are beyond our control, Airtech International, Inc. does not assume any responsibility for the performance of his material for any particular use. The material is sold “as is”.
Airtech International, Inc. disclaims, and buyer waives, any and all implied warranties, including without limitation the implied warranties of merchantability and of fitness for particular use. The information contained herein
represents typical properties and should not be used for specification purposes. Any translation is provided for your convenience only. The official language is English and the official law is California, USA.
450 F (232 C)
Airtech catalog section Airtech products
Bagging films Wrightlon 8400, Ipplon DPT1000 or Ipplon WN1500
Release films Wrightlon 5200, A4000, Airtech MR 1
Pressure sensitive tapes Teflease MG2, Airkap 1
Mold releases (non-liquid)
Filmcote 1524, Toolwright 3, Toolwright 5, Tooltec A005, Tooltec A007,
Tooltec A012, Tooltec CA5, Tooltec CS5
Release fabrics / Peel plies
Release Ply A, B, Super A (structural bonding),
Bleeder Lease A, B (non structural bonding),
Release Ease 234 TFP, Release Ease 234 TFNP
Breathers & Bleeders All Ultraweave products
Vacuum bag sealant tapes GS-213-3, GS-43MR
Vacuum valves and hoses
Vac Valve 401 & 401C, Vac Valve 402 & 402A,
Airflow 65R, Airflow 100R or Airflow 800 hose,
AQD 500TF or Airlock 450TF & 550TF quick disconnect
Resin infusion products OF 313, 500, 750, 1000
550 F (288 C)
Airtech catalog section Airtech products
Bagging films Thermalimide
Release films Airtech MR1, Wrightlon 5900
Pressure sensitive tapes Teflease MG2, Airkap 1
Release fabrics / Peel plies Bleeder Lease C, E, Release Ease 234 TFP, Release Ease 234 TFNP
Breathers & Bleeders Airweave UHT 800
Vacuum bag sealant tapes A-800-3G
Vacuum valves and hoses Vac Valve 409 SS HTR, Airflow 800 hose, Airlock 550TF quick disconnect
650 F (343 C)
Airtech catalog section Airtech products
Bagging films Thermalimide
Release films Thermalimide coated with high temperature release agent
Pressure sensitive tapes Airkap 1
Release fabrics / Peel plies Bleeder Lease C, E
Breathers & Bleeders Airweave UHT 800
Vacuum bag sealant tapes A800-3G (use with GS-43MR)
Vacuum valves and hoses Vac Valve 409 SS HTR, Airflow 800 hose, AHTC 1000 QTD quick disconnect
P. 6

INTERNATIONAL INC. VACUUM BAGGING TECHNIQUES
5700 Skylab Road
Huntington Beach
CA 92647 USA
Phone : +1 714-899-8100
Fax : +1 714-899-8179
E-mail : airtech@airtech.com
Website : www.airtech.com
Last updated : 2013-10-04
Catalog position : Technical information
As the conditions or methods of use, including storage, are beyond our control, Airtech International, Inc. does not assume any responsibility for the performance of his material for any particular use. The material is sold “as is”.
Airtech International, Inc. disclaims, and buyer waives, any and all implied warranties, including without limitation the implied warranties of merchantability and of fitness for particular use. The information contained herein
represents typical properties and should not be used for specification purposes. Any translation is provided for your convenience only. The official language is English and the official law is California, USA.
MOLD RELEASE
To prevent a composite part from adhering to a mold surface during cure, 2 to 3 light layers of a mold release is
typically applied directly to the mold surface.
ALTERNATIVE METHOD OF RELEASE
Another method to prevent a composite part from adhering to a mold surface during cure is through the use of
a release liner with a pressure sensitive adhesive backing such as Tooltec A005 (shown in photo).
Tooltec A005 is a sheet of release film with a pressure sensitive adhesive that can be spread across a mold
surface. Once in place, the Tooltec A005 acts as a release layer between the mold and the composite part. In
addition, Tooltec A005 can often be used for several cure cycles before needing to be replaced.
LAY-UP
Prepreg/ fabric should be placed on the mold while ensuring complete contact to the mold surface. Each
additional ply should have full curvilinear contact with the previous ply. Gaps that occur between plies or the
mold surface are known as bridging , and should be avoided as much as possible. (note the contour contact of
the prepreg in photo).
PEEL PLY
As with the prepreg/ fabric, the peel ply should be placed on the completed lay-up with full curvilinear contact.
Areas that need to be cut can be butt spliced or have a small overlap of peel ply material. (Econostitch is shown
in photo).
P. 8

INTERNATIONAL INC. VACUUM BAGGING TECHNIQUES
5700 Skylab Road
Huntington Beach
CA 92647 USA
Phone : +1 714-899-8100
Fax : +1 714-899-8179
E-mail : airtech@airtech.com
Website : www.airtech.com
Last updated : 2013-10-04
Catalog position : Technical information
As the conditions or methods of use, including storage, are beyond our control, Airtech International, Inc. does not assume any responsibility for the performance of his material for any particular use. The material is sold “as is”.
Airtech International, Inc. disclaims, and buyer waives, any and all implied warranties, including without limitation the implied warranties of merchantability and of fitness for particular use. The information contained herein
represents typical properties and should not be used for specification purposes. Any translation is provided for your convenience only. The official language is English and the official law is California, USA.
RELEASE FILMS
Release films are typically extended beyond the part lay-up and held in place with pressure sensitive tape.
(Flashbreaker 2R(HT) tape, Wrightlon 5200 release film shown).
BREATHER
A non-woven breather layer is then placed on top of the release film and can be held in place with pressure
sensitive tape. (Flashbreaker 2R(HT) tape is shown in photo. Airweave N10 is the breather shown).
VACUUM BAG SEALANT TAPE
A strip of vacuum bag sealant tape is placed around the periphery of the mold. The paper backing should be left
on the tape at this time so that the vacuum bag can be easily positioned (see photos). (GS-213-3 is shown in
photo).
VACUUM BAG APPLICATION
Choosing the right size vacuum bag is critical. Too small of a vacuum bag may cause the bag to stretch (also
known as bridging ) which could cause a rupture during the cure. Allowing for approximately 30 % to 40 %
excess vacuum bag is a good starting point for complex shapes.
P. 9

INTERNATIONAL INC. VACUUM BAGGING TECHNIQUES
5700 Skylab Road
Huntington Beach
CA 92647 USA
Phone : +1 714-899-8100
Fax : +1 714-899-8179
E-mail : airtech@airtech.com
Website : www.airtech.com
Last updated : 2013-10-04
Catalog position : Technical information
As the conditions or methods of use, including storage, are beyond our control, Airtech International, Inc. does not assume any responsibility for the performance of his material for any particular use. The material is sold “as is”.
Airtech International, Inc. disclaims, and buyer waives, any and all implied warranties, including without limitation the implied warranties of merchantability and of fitness for particular use. The information contained herein
represents typical properties and should not be used for specification purposes. Any translation is provided for your convenience only. The official language is English and the official law is California, USA.
VACUUM BAG PLEATS
The excess vacuum bag material will form pleats. The next step is to carefully place sealant tape inside the pleat
to complete the seal. The process of making pleats will improve with practice.
INSTALLING A THRU THE BAG VACUUM CONNECTION (SEE VACUUM VALVES
AND HOSES SECTION)
The female portion of vacuum valve is applied prior to completely close off bag with sealant tape. The
important thing to remember is not to allow the film to twist / wrinkle when twisting the top half. Wrinkling the
film under the top piece can cause a leak path. Pictured above and below is the Vac Valve 399 and the AQD
500TF quick disconnect fitting.
Cut a small X Install the top piece and twist
P. 11

INTERNATIONAL INC. TOOLING PREPREG SELECTION GUIDE
5700 Skylab Road
Huntington Beach
CA 92647 USA
Phone : +1 714-899-8100
Fax : +1 714-899-8179
E-mail : airtech@airtech.com
Website : www.airtech.com
Last updated : 2018-08-10
Catalog position : Technical information
As the conditions or methods of use, including storage, are beyond our control, Airtech International, Inc. does not assume any responsibility for the performance of his material for any particular use. The material is sold “as is”.
Airtech International, Inc. disclaims, and buyer waives, any and all implied warranties, including without limitation the implied warranties of merchantability and of fitness for particular use. The information contained herein
represents typical properties and should not be used for specification purposes. Any translation is provided for your convenience only. The official language is English and the official law is California, USA.
CEP PREPREG
CEP G3, CEP G12, CEP F7500, CEP F7544
Service temperature Initial cure temperature Resin type
Shelf Life at 72 F
(22 C)
Fabric styles
450 F (232 C)
355 F (alternative 250 F)
or 180 C (alternative 120 C)
Cynate epoxy 20 days
Carbon 3K twill &
12K twill
Fiberglass 7500
& 7544
Benefits
Excellent high temperature properties (High Tg. 500 F or 260 C) for long tool life & reduced tooling cost.
Lower temperature cure than BMI reduces dimensional deviation due to thermal expansion.
Excellent tack level for fast ply lay-up and ease of processing for reduced labor cost.
BETA PREPREG
Beta G3, Beta G6, Beta G12
Service temperature Initial cure temperature Resin type Shelf Life at 72 F (22 C) Fabric styles
425 F (218 C) 355 F (180 C) Benzoxazine 6 months
Carbon 3K twill,
6K twill, & 12K
twill
Benefits
Outstanding toughness and high Tg.(485 F or 251 C) ensures long term tool life & reduced life cycle cost.
Exceptionally low shrinkage for low residual stresses, low spring back & excellent post machining.
Exceptionally long out-life for greatly increased work flexibility, good tack for ease of laminating.
BETA TX670 DISCO PREPREG
Service Temperature Initial Cure Temperature Resin Type
Shelf Life at 77 F
(25 C)
Fabric Styles
425 F (218 C) 355 F (180 C) Benzoxazine 6 months Carbon 24K triaxial
Benefits
Discontinuous sheets reduce layup effort and improve conformability.
Quasi-isotropic within each ply, providing simpler and faster layup.
Will produce consistent laminate thickness for even heat-up and meeting design targets.
TOOLMASTER PREPREG
TMFP3100, TMFP3200, TMGP4000, TMGP4100, TMGP4200
Service temperature Initial cure temperature Resin type
Shelf Life at 72 F
(22 C)
Fabric styles
400 F (204 C) 250 F (120 C) Epoxy 40 days
Carbon 3K plain, 6K twill
& 12K twill
Fiberglass 7500 & 7544
Benefits
Toolmaster composite molds are lighter weight than metal tools for easier manual handling.
Lower thermal mass than metal tools allows faster heat up, shorter cures & greater productivity.
Toolmaster s low volatile content & excellent adhesion enables Airpad rubber caul reinforcement.
P. 14

INTERNATIONAL INC. TOOLING RESIN PRODUCT SELECTION GUIDE
5700 Skylab Road
Huntington Beach
CA 92647 USA
Phone : +1 714-899-8100
Fax : +1 714-899-8179
E-mail : airtech@airtech.com
Website : www.airtech.com
Last updated : 2018-09-12
Catalog position : Technical information
As the conditions or methods of use, including storage, are beyond our control, Airtech International, Inc. does not assume any responsibility for the performance of his material for any particular use. The material is sold “as is”.
Airtech International, Inc. disclaims, and buyer waives, any and all implied warranties, including without limitation the implied warranties of merchantability and of fitness for particular use. The information contained herein
represents typical properties and should not be used for specification purposes. Any translation is provided for your convenience only. The official language is English and the official law is California, USA.
TOOLFUSION 3
Low viscosity high service temperature epoxy infusion resin
Service temperature Initial cure temperature Resin type Pot life at 72 F (22 C)
Viscosity at 72 F
(22 C)
400 F (204 C) 120 F (49 C) Epoxy 300 minutes 450 cps
Benefits
Nano technology delivers outstanding toughness & high Tg. (425 F or 218 C) for long tool life.
Low initial cure temperature for low thermal expansion and low cost master models.
Low viscosity allows infusion of thicker and more complex laminates with fewer resin feed lines.
Resin infusion process for high quality laminates at low cost, no freezer storage, no autoclave cure.
TOOLFUSION 1
Room temperature curing epoxy infusion resin
Service temperature Initial cure temperature Resin type Pot life at 72 F (22 C)
Viscosity at 72 F
(22 C)
375 F (191 C) 72 F (22 C) Epoxy 75 minutes 600 cps
Benefits
Resin infusion process for high quality laminates at low cost, no freezer storage, no autoclave cure.
Room temperature curing avoids any thermal expansion and dimensional deviation.
Room temperature curing allows use of low temperature & low cost master mode.
TMR 2001
Room temperature curing high service temperature laminating resin
Service temperature Initial cure temperature Resin type Pot life at 72 F (22 C)
Viscosity at 72 F
(22 C)
400 F (204 C) 72 F (22 C) Epoxy 240 minutes 5,200 cps
Benefits
Composite molds are lighter weight than metal tools for easier manual handling.
Room temperature curing allows use of low temperature & low cost master model materials.
Room temperature curing avoids any thermal expansion and dimensional deviation.
TOOL SURFACE COAT RESINS
Surface coat resin Service temperature Applications Composition
TMSF 5100 400 F (204 C) Toolmaster & LTC Mineral filled epoxy
TMSF 5001 400 F (204 C)
TMR 2001 &
Toolfusion
Graphite filled epoxy
TMSF 5005 400 F (204 C)
TMR 2001 &
Toolfusion
Silicon carbide filled epoxy
Infusioncoat 375 F (191 C)
TMR 2001 &
Toolfusion
Graphite filled epoxy
Benefits
Surface coat resins will eliminate mold surface pitting, ensuring good part surface finish.
The protective surface layer will prevent fibre damage and extend tool life, reducing tooling costs.
Surface coat provides a tacky layer which aids first ply positioning during Toolfusion builds.
P. 16

Our Mission