TECHNICAL DATA SHEE T
AB80
BREATHER FABRIC
Aerovac
955-10 National Parkway
Schaumburg, IL 60 173
USA
TDS AB80_02.21_Issue1
AB80
Breather fabric
Ideally suited to aerospace applications
Features and Benefits
Non-woven polyester breather fabric.
This product is mechanically bonded by needling.
Lightweight highly conformable breather.
PROPERTIES
Maximum use temperature 204 C 400 F
Color White
Fiber Polyester
Weight 80g/m 2.6oz/yd
AVAILABILITY
Standard width Up to 1.52m Up to 6in
Standard length Up to 100m Up to 109yd
Cut shapes/slit widths Available to order
STORAGE
No special storage conditions required.
HEALTH & SAFETY
Please refer to the product MSDS for safe handling, personal protective equipment recommendations and disposal
considerations.
DISCLAIMER: The data and information provided in this document have been obtained from carefully controlled samples and are considered to be
representative of the product described. Aerovac does not express or imply any guarantee or warranty of any kind including, but not limited to, the accuracy, the
completeness or the relevance of the data and information set out herein. Because the properties of this product can be significantly affected by the fabrication
and testing techniques employed, and since Aerovac does not control the conditions under which its products are tested and used, Aerovac cannot guarantee
the properties provided will be obtained with other processes and equipment. No guarantee or warranty is provided if the product is adapted for a s pecific use or
purpose. Aerovac declines any liability with respect to the use made by any third party of the data and information contained herein. Aerovac has the right to
change any data or information when deemed appropriate. All trademarks are the property of their respective owners. 2021 , Aerovac. All rights reserved.