SAFETY DATA SHEET
according to 29 CFR 1910.1200 and ANSI standard Z400.1-2010
Airtac 2C
Material number 1191
Revision date: 2/10/2023
Version: 1.0
Replaces version: 0.0
Language: en-US
Date of first version:2/10/2023
Page: 1 of 11
1. Product and company identification
Product identifier
Trade name: Airtac 2C
Relevant identified uses of the substance or mixture and uses advised against
General use: Adhesive
For industrial purposes only
Details of the supplier of the safety data sheet
Company name:
Airtech International, Inc.
5700 Skylab Road
Huntington Beach, CA 92647
E-mail: airtech@airtechintl.com
Website: www.airtechonline.com
Telephone: +1 714.899.8100
Department responsible for
information:
Telephone: +1 714.899.8100
E-mail: airtech@airtechintl.com
Airtech Europe Sarl
Zone industrielle Haneboesch
L 4562 Differdange
Luxembourg
Website: www.airtech.lu
Telephone: +352 582.282
Department responsible for information:
Telephone: +352 582.282
E-mail: sales@airtech.lu
Airtech Advanced Materials UK Ltd.
The Causeway
Broadway Business Park
Chadderton, Oldham
OL9 9XD United Kingdom
Website: www.airtech-amg.co.uk
Telephone: +44 161.947.1610
Department responsible for
information:
Telephone: +44 161.947.1610
E-mail: sales@airtech-amg.co.uk
Airtech Asia Ltd.
No. 161 of Anyuan Rd
Chagugang County
Wuqing District
301721, Tianjin, P.R. China
Website: www.airtech.asia
Telephone: +86 22 8862 9800
Telefax:: +86 22 8862 9900
Department responsible for information:
Telephone: +86 22 8862 9800
E-mail: airtech.asia@airtechasia.com.cn
Emergency phone number
CHEMTREC EMERGENCY PHONE:
Within USA/Canada: 1-(800)424-9300
International: +1 703-741-5970
2. Hazards identification
Emergency overview
Appearance: Physical state at 68 F and 101.3 kPa: liquid
Form: Aerosol
Color: Clear
Odor: Hydrocarbons
Classification: Flammable Aerosol – Category 1. Compressed Gas. Skin Irritation – Category 2. Eye Irritation –
Category 2A. Specific Target Organ Toxicity (Single Exposure) – Category 3.
Aquatic toxicity – chronic – Category 3.
Hazard symbols:
Signal word: Danger
printed by Airtech Advanced Materials Group with Qualisys SUMDAT
SAFETY DATA SHEET
according to 29 CFR 1910.1200 and ANSI standard Z400.1-2010
Airtac 2C
Material number 1191
Revision date: 2/10/2023
Version: 1.0
Replaces version: 0.0
Language: en-US
Date of first version:2/10/2023
Page: 2 of 11
Hazard statements:
Extremely flammable aerosol.
Contains gas under pressure; may explode if heated.
Causes skin irritation.
Causes serious eye irritation.
May cause drowsiness or dizziness.
Harmful to aquatic life with long lasting effects.
Precautionary statements:
Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No
smoking.
Do not spray on an open flame or other ignition source.
Do not pierce or burn, even after use.
Avoid breathing spray.
Wash hands and face thoroughly after handling.
Use only outdoors or in a well-ventilated area.
Avoid release to the environment.
Wear protective gloves/protective clothing/eye protection.
IF ON SKIN: Wash with plenty of water/soap.
IF INHALED: Remove person to fresh air and keep comfortable for breathing.
IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present
and easy to do. Continue rinsing.
Call a POISON CENTER/doctor if you feel unwell.
Specific treatment (see ‘ First aid ‘ on this label).
If skin irritation occurs: Get medical advice/attention.
If eye irritation persists: Get medical advice/attention.
Take off contaminated clothing and wash it before reuse.
Store in a well-ventilated place. Keep container tightly closed.
Store locked up.
Protect from sunlight. Store in a well-ventilated place.
Protect from sunlight. Do not expose to temperatures exceeding 50 C/122 F.
Dispose of contents/container to hazardous or special waste collection point.
Regulatory status
This material is considered hazardous by the U.S. OSHA Hazard Communication Standard (29
CFR 1910.1200).
Hazards not otherwise classified
Vapor may travel great distances and cause fire and backflashes. Potentially explosive
mixtures may form if adequate ventilation is not provided.
Inhaling can lead to irritations of the respiratory tract and mucous membrane.
Higher doses may lead to a narcotic effect.
see section 11: Toxicological information
3. Composition / Information on ingredients
Chemical characterization:Mixture containing the substances listed below:
printed by Airtech Advanced Materials Group with Qualisys SUMDAT
SAFETY DATA SHEET
according to 29 CFR 1910.1200 and ANSI standard Z400.1-2010
Airtac 2C
Material number 1191
Revision date: 2/10/2023
Version: 1.0
Replaces version: 0.0
Language: en-US
Date of first version:2/10/2023
Page: 3 of 11
Relevant ingredients:
CAS No. Designation ConcentrationClassification
CAS
64742-49-0
Hydrocarbons,
C6-C7,
n-alkanes,
isoalkanes,
cyclics, <5%
n-hexane
10 - 30 % Flammable Liquid - Category 2. Skin Irritation - Category 2.
Specific Target Organ Toxicity (Single Exposure) - Category 3.
Aspiration Toxicity - Category 1. Aquatic toxicity - chronic -
Category 2.
CAS 79-20-9 Methyl acetate10 - 30 % Flammable Liquid - Category 2. Eye Irritation - Category 2A.
Specific Target Organ Toxicity (Single Exposure) - Category 3.
CAS 67-64-1 Acetone 1 - 5 % Flammable Liquid - Category 2. Eye Irritation - Category 2A.
Specific Target Organ Toxicity (Single Exposure) - Category 3.
CAS 75-37-6 1,1-
Difluoroethane
10 - 30 % Flammable Gas - Category 1. Liquefied Gas.
CAS
68476-85-7
Petroleum
gases, liquefied
5 - 10 % Flammable Gas - Category 1. Liquefied Gas.
Additional information:Information about Petroleum gases, liquefied:
Contains < 0.1 % 1,3-Butadiene.
4. First aid measures
General information: IF exposed or concerned: Get medical advice/attention. First aider: Pay attention to
self-protection! If medical advice is needed, have product container or label at hand. Take off
contaminated clothing and wash it before reuse.
In case of inhalation: If breathing is difficult, remove victim to fresh air and keep at rest in a position comfortable for
breathing. Seek medical attention if problems persist.
Following skin contact:Immediately clean with water and soap followed by thorough rinsing. In case of skin reactions,
consult a physician.
After eye contact: Immediately flush eyes with plenty of flowing water for 10 to 15 minutes holding eyelids apart.
Remove contact lenses, if present and easy to do. Continue rinsing. Subsequently consult an
ophthalmologist.
After swallowing: Rinse mouth immediately and drink plenty of water. Never give anything by mouth to an
unconscious person. Do not induce vomiting. Seek medical attention.
Most important symptoms/effects, acute and delayed
In case of inhalation:
Cough, chest congestion, chest pressure, depression of central nervous system, drowsiness,
dizziness, intoxication, unconsciousness, death.
In case of ingestion:
Nausea, headache, dizziness, intoxication. Burns in the mouth, pharynx, oesophagus, and
gastrointestinal tract.
After contact with skin: Redness, irritation, dry skin.
After eye contact: Upon direct contact with eyes may cause burning, tearing, redness.
Information to physician
Treat symptomatically.
5. Fire fighting measures
Flash point/flash point range:< -76 F (Petroleum gases, liquefied)
Auto-ignition temperature:689 F (Petroleum gases, liquefied)
Suitable extinguishing media:Water spray jet, alcohol resistant foam, dry chemical powder, carbon dioxide
printed by Airtech Advanced Materials Group with Qualisys SUMDAT
SAFETY DATA SHEET
according to 29 CFR 1910.1200 and ANSI standard Z400.1-2010
Airtac 2C
Material number 1191
Revision date: 2/10/2023
Version: 1.0
Replaces version: 0.0
Language: en-US
Date of first version:2/10/2023
Page: 4 of 11
Extinguishing media which must not be used for safety reasons:
Full water jet
Specific hazards arising from the chemical
Extremely flammable aerosol. Contains gas under pressure; may explode if heated.
Air combined with vapors may form potentially explosive mixtures that are heavier than air.
Vapor may travel great distances and cause fire and backflashes.
May form dangerous gases and vapors in case of fire.
Furthermore, there may develop: Carbon monoxide and carbon dioxide.
Protective equipment and precautions for firefighters:
Wear self-contained positive pressure breathing apparatus and full firefighting protective clothing.
Additional information:Heating will lead to pressure increase: Danger of bursting and explosion. Cool exposed
containers with water spray.
Move undamaged containers from immediate hazard area if it can be done safely.
In case of major fire and large quantities: Evacuate area. Fight fire remotely due to the risk of
explosion.
Do not allow fire water to penetrate into surface or ground water.
Fire residuals and contaminated extinguishing water must be disposed of in accordance with
the regulations of the local authorities.
6. Accidental release measures
Personal precautions: Avoid breathing spray. Avoid contact with the substance.
Eliminate all ignition sources if safe to do so. Provide adequate ventilation.
Wear appropriate protective equipment. Keep unprotected people away. Take off contaminated
clothing and wash it before reuse.
Cordon off downwind area at risk and warn inhabitants.
Environmental precautions:Do not allow to enter into ground-water, surface water or drains. Danger of explosion!
In case of release, notify competent authorities.
Methods for clean-up: Isolate leaked material using non-flammable absorption agent (e.g. sand, earth, vermiculit,
diatomaceous earth) and collect it for disposal in appropriate containers in accordance with the
local regulations (see section 13).
Thoroughly clean surrounding area.
In case of greater quantities: Collect mechanically (use only explosion-proof equipment when
pumping out).
Additional information:Use explosion-proof equipment and non-sparking tools/utensils. Take precautionary
measures against static discharge.
7. Handling and storage
Handling
Advices on safe handling:Provide adequate ventilation, and local exhaust as needed. Avoid breathing spray. Do not get in
eyes, on skin, or on clothing. Wear appropriate protective equipment.
Do not eat, drink or smoke when using this product. Wash hands thoroughly after handling.
Contaminated work clothing should not be allowed out of the workplace. Take off contaminated
clothing and wash it before reuse. Guarantee sufficient ventilation during and after use, in order
to prevent vapor accumulation. Work place should be equipped with a shower and an eye
rinsing apparatus.
Precautions against fire and explosion:
Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No
smoking. Do not pierce or burn, even after use. Do not spray on an open flame or other ignition
source. Take precautionary measures against static discharge.
printed by Airtech Advanced Materials Group with Qualisys SUMDAT
SAFETY DATA SHEET
according to 29 CFR 1910.1200 and ANSI standard Z400.1-2010
Airtac 2C
Material number 1191
Revision date: 2/10/2023
Version: 1.0
Replaces version: 0.0
Language: en-US
Date of first version:2/10/2023
Page: 5 of 11
Storage
Requirements for storerooms and containers:
Keep container tightly closed and in a well-ventilated place.
Keep container dry. Keep only in the original container.
Protect from sunlight. Do not expose to temperatures exceeding 50 C/122 F.
Store containers in upright position.
Hints on joint storage:Do not store together with: Strong oxidizing agents, strong alkalis, strong acids.
Keep away from food, drink and animal feedingstuffs.
8. Exposure controls / personal protection
Exposure guidelines
Occupational exposure limit values:
CAS No. Designation Type Limit value
79-20-9 Methyl acetate USA: ACGIH: STEL 757 mg/m ; 250 ppm
USA: ACGIH: TWA 606 mg/m ; 200 ppm
USA: IDLH: TWA 3100 ppm [10% LEL]
USA: NIOSH: STEL 760 mg/m ; 250 ppm
USA: NIOSH: TWA 610 mg/m ; 200 ppm
USA: OSHA: TWA 610 mg/m ; 200 ppm
67-64-1 Acetone USA: ACGIH: STEL 500 ppm
USA: ACGIH: TWA 250 ppm
USA: IDLH: TWA 2500 ppm
USA: NIOSH: TWA 590 mg/m ; 250 ppm
USA: OSHA: TWA 2400 mg/m ; 1000 ppm
68476-85-7Petroleum gases, liquefiedUSA: IDLH: TWA 2000 ppm [10% LEL]
USA: NIOSH: TWA 1800 mg/m ; 1000 ppm
USA: OSHA: TWA 1800 mg/m ; 1000 ppm
Biological limit values:
CAS No. DesignationType Limit value ParameterSampling
67-64-1 Acetone USA: ACGIH-BEI, urine25 mg/L acetone end of exposure or end of shift
Engineering controls
Provide for good ventilation or exhaust system or work with completely self-contained
equipment. Explosion protection required.
See also information in chapter 7, section storage.
Personal protection equipment (PPE)
Eye/face protection: Tightly sealed goggles according to OSHA Standard - 29 CFR: 1910.133 or ANSI Z87.1-2010.
Skin protection: Flame retardant, antistatic and chemical resistant protective clothing.
Protective gloves according to OSHA Standard - 29 CFR: 1910.138.
Glove material: Nitrile rubber
Observe glove manufacturer's instructions concerning penetrability and breakthrough time.
Respiratory protection:Respiratory protection must be worn whenever the TLV (WEL) levels have been exceeded.
Short-term: Use filter apparatus type AX.
The filter class must be suitable for the maximum contaminant concentration
(gas/vapor/aerosol/particulates) that may arise when handling the product.
printed by Airtech Advanced Materials Group with Qualisys SUMDAT
SAFETY DATA SHEET
according to 29 CFR 1910.1200 and ANSI standard Z400.1-2010
Airtac 2C
Material number 1191
Revision date: 2/10/2023
Version: 1.0
Replaces version: 0.0
Language: en-US
Date of first version:2/10/2023
Page: 6 of 11
General hygiene considerations:Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No
smoking.
Do not pierce or burn, even after use.
Avoid breathing spray. Do not get in eyes, on skin, or on clothing. Wear appropriate protective
equipment.
Do not eat, drink or smoke when using this product. Wash hands thoroughly after handling.
Contaminated work clothing should not be allowed out of the workplace. Take off contaminated
clothing and wash it before reuse.
Guarantee sufficient ventilation during and after use, in order to prevent vapor accumulation.
Work place should be equipped with a shower and an eye rinsing apparatus.
Environmental exposure controls
Refer to 6.: Section "Environmental precautions".
9. Physical and chemical properties
Information on basic physical and chemical properties
Appearance: Physical state at 68 F and 101.3 kPa: liquid
Form: Aerosol
Color: Clear
Odor: Hydrocarbons
Odor threshold: No data available
pH: No data available
Melting point/freezing point: No data available
Initial boiling point and boiling range: -40 - 28.4 F (Petroleum gases, liquefied)
-13 F (1,1-Difluoroethane)
Flash point/flash point range: < -76 F (Petroleum gases, liquefied)
Evaporation rate: No data available
Flammability: Extremely flammable aerosol.
Explosion limits: LEL (Lower Explosion Limit): 1.40 Vol-% (Petroleum gases, liquefied)
UEL (Upper Explosive Limit): 10.90 Vol-% (Petroleum gases, liquefied)
Vapor pressure: at 68 F: 100 - 300 kPa
Vapor density: No data available
Density: at 68 F: 0.86 g/mL (Liquid base material)
Water solubility: Insoluble
Partition coefficient: n-octanol/water: 3.4 - 5.2 log P(o/w) (Hydrocarbons, C6-C7, n-alkanes, isoalkanes, cyclics, <5%
n-hexane)
Based on the n-octanol/water partition coefficient accumulation in organisms is
possible.
Auto-ignition temperature: 689 F (Petroleum gases, liquefied)
Thermal decomposition: No data available
Viscosity, kinematic: at 68 F: 50 - 250 mm /s (Liquid base material)
Explosive properties: Vapors may form explosive mixtures with air. Contains gas under pressure; may
explode if heated.
Oxidizing characteristics: Not oxidising
10. Stability and reactivity
Reactivity: Extremely flammable aerosol.
Vapors may form explosive mixtures with air.
Chemical stability: Stable under recommended storage conditions.
The product is highly volatile.
printed by Airtech Advanced Materials Group with Qualisys SUMDAT
SAFETY DATA SHEET
according to 29 CFR 1910.1200 and ANSI standard Z400.1-2010
Airtac 2C
Material number 1191
Revision date: 2/10/2023
Version: 1.0
Replaces version: 0.0
Language: en-US
Date of first version:2/10/2023
Page: 7 of 11
Possibility of hazardous reactions:
Contains gas under pressure; may explode if heated.
Conditions to avoid: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No
smoking. Do not pierce or burn, even after use. Do not spray on an open flame or other ignition
source. Protect from sunlight. Do not expose to temperatures exceeding 50 C/122 F.
Incompatible materials:Strong oxidizing agents, strong acids, strong alkalis
Hazardous decomposition products:
No hazardous decomposition products when regulations for storage and handling are observed.
Thermal decomposition: No data available
11. Toxicological information
Toxicological tests
Toxicological effects: The statements are derived from the properties of the single components. No toxicological data
is available for the product as such.
Acute toxicity (oral): Based on available data, the classification criteria are not met.
Acute toxicity (dermal): Based on available data, the classification criteria are not met.
Acute toxicity (inhalative): Based on available data, the classification criteria are not met.
Skin corrosion/irritation: Skin Irritation - Category 2 = Causes skin irritation.
Serious eye damage/irritation: Eye Irritation - Category 2A = Causes serious eye irritation.
Sensitisation to the respiratory tract: Based on available data, the classification criteria are not
met.
Skin sensitisation: Based on available data, the classification criteria are not met.
Germ cell mutagenicity/Genotoxicity: Based on available data, the classification criteria are not
met.
Carcinogenicity: Based on available data, the classification criteria are not met.
Reproductive toxicity: Based on available data, the classification criteria are not met.
Effects on or via lactation: Lack of data.
Specific target organ toxicity (single exposure): Specific Target Organ Toxicity (Single Exposure) -
Category 3 = May cause drowsiness or dizziness.
Specific target organ toxicity (repeated exposure): Based on available data, the classification
criteria are not met.
Aspiration hazard: Based on available data, the classification criteria are not met.
Symptoms
In case of inhalation:
Cough, chest congestion, chest pressure, depression of central nervous system, drowsiness,
dizziness, intoxication, unconsciousness, death.
In case of ingestion:
Nausea, headache, dizziness, intoxication. Burns in the mouth, pharynx, oesophagus, and
gastrointestinal tract.
After contact with skin: Redness, irritation, dry skin.
After eye contact: Upon direct contact with eyes may cause burning, tearing, redness.
printed by Airtech Advanced Materials Group with Qualisys SUMDAT
SAFETY DATA SHEET
according to 29 CFR 1910.1200 and ANSI standard Z400.1-2010
Airtac 2C
Material number 1191
Revision date: 2/10/2023
Version: 1.0
Replaces version: 0.0
Language: en-US
Date of first version:2/10/2023
Page: 8 of 11
12. Ecological information
Ecotoxicity
Aquatic toxicity: Harmful to aquatic life with long lasting effects.
Information about Hydrocarbons, C6-C7, n-alkanes, isoalkanes, cyclics, <5% n-hexane:
Fish toxicity:
LL50 Oncorhynchus mykiss: 11.4 mg/L/96h
Daphnia toxicity:
EL50 Daphnia magna (Big water flea): 3 mg/L/48h
Algae toxicity:
EL50 Pseudokirchneriella subcapitata (green algae): 30 - 100 mg/L/72h
Mobility in soil
No data available
Persistence and degradability
Further details: Information about Hydrocarbons, C6-C7, n-alkanes, isoalkanes, cyclics, <5% n-hexane:
Readily biodegradable.
Additional ecological information
Volatile organic compounds (VOC):
< 30%
General information: Do not allow to enter into ground-water, surface water or drains.
13. Disposal considerations
Product
Recommendation: Do not pierce or burn, even after use.
Special waste. Dispose of waste according to applicable legislation.
Do not dispose of with household waste.
Package
Recommendation: Dispose of waste according to applicable legislation.
Empty carefully and completely, if possible. Handle empty containers with care. Incineration
may cause explosion.
150110: Packaging containing residues of or contaminated by dangerous substances.
150104: Metallic packaging: Completely emptied packages can be recycled.
14. Transport information
UN number
ADR/RID, IMDG, IATA-DGR:UN 1950
UN proper shipping name
ADR/RID, IMDG: UN 1950, AEROSOLS
IATA-DGR: UN 1950, AEROSOLS, FLAMMABLE
Transport hazard class(es)
ADR/RID: Class 2, Code: 5F
IMDG: Class 2.1, Subrisk -
IATA-DGR: Class 2.1
Packing group
ADR/RID, IMDG, IATA-DGR:not applicable
printed by Airtech Advanced Materials Group with Qualisys SUMDAT
SAFETY DATA SHEET
according to 29 CFR 1910.1200 and ANSI standard Z400.1-2010
Airtac 2C
Material number 1191
Revision date: 2/10/2023
Version: 1.0
Replaces version: 0.0
Language: en-US
Date of first version:2/10/2023
Page: 9 of 11
Environmental hazards
Marine pollutant: no
Transport in bulk according to Annex II of MARPOL 73/78 and the IBC Code
No data available
USA: Department of Transportation (DOT)
Identification number: UN1950
Proper shipping name: UN 1950, AEROSOLS
Hazard class or Division: 2.1
Labels: 2.1
Special Provisions: N82
Packaging Exceptions: 306
Packaging Non-bulk: None
Packaging Bulk: None
Quantity limitations Passenger aircraft / rail: 75 kg
Quantity limitations Cargo only: 150 kg
Vessel stowage Location: A
Vessel stowage Other: 25, 87, 126, 157
Sea transport (IMDG)
UN number: UN 1950
Proper shipping name: UN 1950, AEROSOLS
Class or division, Subsidary risk: Class 2.1, Subrisk -
EmS: F-D, S-U
Special Provisions: 63 190 277 327 344 381 959
Limited quantities: 1000 mL
Excepted quantities: E0
Package - Instructions: P207, LP200
Package - Provisions: PP87, L2
IBC - Instructions: -
IBC - Provisions: -
Tank instructions - IMO: -
Tank instructions - UN: -
Tank instructions - Provisions: -
Stowage and handling: SW1 SW22
Segregation: SG69
Properties and observations: -
Marine pollutant: no
Segregation group: none
Air transport (IATA)
UN/ID number: UN 1950
Proper shipping name: UN 1950, AEROSOLS, FLAMMABLE
Class or division, Subsidary risk: Class 2.1
Hazard label: Flamm. gas
Excepted Quantity Code: E0
Passenger and Cargo Aircraft: Ltd.Qty.: Pack.Instr. Y203 - Max. Net Qty/Pkg. 30 kg G
Passenger and Cargo Aircraft: Pack.Instr. 203 - Max. Net Qty/Pkg. 75 kg
Cargo Aircraft only: Pack.Instr. 203 - Max. Net Qty/Pkg. 150 kg
Special Provisions: A145 A167 A802
Emergency Response Guide-Code (ERG): 10L
printed by Airtech Advanced Materials Group with Qualisys SUMDAT
SAFETY DATA SHEET
according to 29 CFR 1910.1200 and ANSI standard Z400.1-2010
Airtac 2C
Material number 1191
Revision date: 2/10/2023
Version: 1.0
Replaces version: 0.0
Language: en-US
Date of first version:2/10/2023
Page: 10 of 11
15. Regulatory information
National regulations - U.S. Federal Regulations
Hydrocarbons, C6-C7, n-alkanes, isoalkanes, cyclics, <5%
n-hexane:
TSCA Inventory: listed; UVCB
TSCA HPVC: not listed
Methyl acetate: TSCA Inventory: listed; EPA flags T
TSCA HPVC: not listed
Acetone: TSCA Inventory: listed
TSCA HPVC: not listed
1,1-Difluoroethane: TSCA Inventory: listed
TSCA HPVC: not listed
Petroleum gases, liquefied: TSCA Inventory: listed; UVCB
TSCA HPVC: not listed
16. Other information
Text for labeling: Contains 10 - 30 % Hydrocarbons, C6-C7, n-alkanes, isoalkanes, cyclics, <5% n-hexane, 10 -
30 % Methyl acetate, 1 - 5 % Acetone, 10 - 30 % 1,1-Difluoroethane, 5 - 10 % Petroleum gases,
liquefied. Safety data sheet available on request.
Hazard rating systems:
4
20
NFPA Hazard Rating:
Health: 2 (Moderate)
Fire: 4 (Severe)
Reactivity: 0 (Minimal)
HEALTH 2
FLAMMABILITY 4
PHYSICAL HAZARD 0
X
HMIS Version III Rating:
Health: 2 (Moderate)
Flammability: 4 (Severe)
Physical Hazard: 0 (Minimal)
Personal Protection: X = Consult your supervisor
Abbreviations and acronyms:ADN: European Agreement concerning the International Carriage of Dangerous Goods by Inland Waterways
ADR: European Agreement concerning the International Carriage of Dangerous Goods by Road
Aquatic toxicity - chronic: Hazardous to the aquatic environment - chronic
AS/NZS: Australian Standards/New Zealand Standards
Aspiration Toxicity: Aspiration toxicity
CAS: Chemical Abstracts Service
CFR: Code of Federal Regulations
CLP: Classification, Labelling and Packaging
DMEL: Derived minimal effect level
DNEL: Derived no-effect level
EC: European Community
EL50: Effective loading rate 50%
EN: European Standard
EQ: Excepted quantities
Eye Irritation: Eye irritation
Flammable Gas: Flammable gases
Flammable Liquid: Flammable liquid
IATA: International Air Transport Association
IATA-DGR: International Air Transport Association Dangerous Goods Regulations
IBC Code: International Code for the Construction and Equipment of Ships carrying Dangerous Chemicals in Bulk
IMDG Code: International Maritime Dangerous Goods Code
LEL: Lower Explosion Limit
log P(o/w): Partition coefficient: octanol/water
MARPOL: Maritime Pollution: The International Convention for the Prevention of Pollution from Ships
OEL: Occupational Exposure Limit Value
OSHA: Occupational Safety and Health Administration
PBT: Persistent, bioaccumulative and toxic
PNEC: Predicted no-effect concentration
REACH: Registration, Evaluation, Authorisation and Restriction of Chemicals
RID: Regulations Concerning the International Carriage of Dangerous Goods by Rail
Skin Irritation: Skin irritation
STOT SE: Specific target organ toxicity - single exposure
TLV: Threshold Limit Value
TRGS: Technical Rules for Hazardous Substances
UN: United Nations
vPvB: Very persistent and very bioaccumulative
WEL: Workplace Exposure Limit
printed by Airtech Advanced Materials Group with Qualisys SUMDAT
SAFETY DATA SHEET
according to 29 CFR 1910.1200 and ANSI standard Z400.1-2010
Airtac 2C
Material number 1191
Revision date: 2/10/2023
Version: 1.0
Replaces version: 0.0
Language: en-US
Date of first version:2/10/2023
Page: 11 of 11
Department issuing data sheet
Contact person: see section 1: Department responsible for information
This data sheet cannot cover all possible situations which the user may experience during processing. Each aspect of your operation should be examined to determine if, and which additional
precautions may be necessary. All health and safety information contained in this data sheet should be provided to your employees and customers. It is your responsibility to develop appropriate
workplace instructions and training programs for employees.
As the conditions and methods of use are beyond our control, we do not assume any responsibility and expressly disclaim any liability for any use of this product. The information supplied on this
safety data sheet complies with our current level of knowledge as well as with national and EU regulations. All statements or suggestions are made without warranty, expressed or implied,
regarding accuracy of information, the hazards connected with the use of the product or the results to be obtained from the use thereof.
printed by Airtech Advanced Materials Group with Qualisys SUMDAT